Summary:
C7113 States that "An ac-value shall not be unlimited polymorphic." We failed
to detect this situation which resulted in a crash when trying to get the
underlying derived type specification of the unlimited polymorphic value.
I added code to avoid the crash, code to emit an error message, and a test.
Reviewers: klausler, tskeith, DavidTruby
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D83793
Summary:
This patch is enabling the generation of clauses enum sets for semantics check in Flang through
tablegen. Enum sets and directive - sets map is generated by the new tablegen infrsatructure for OpenMP
and other directive languages.
The semantic checks for OpenMP are modified to use this newly generated map.
Reviewers: DavidTruby, sscalpone, kiranchandramohan, ichoyjx, jdoerfert
Reviewed By: DavidTruby, ichoyjx
Subscribers: mgorny, yaxunl, hiraditya, guansong, sstefan1, aaron.ballman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D83326
Summary:
When a program unit creates a generic based on one defined in a module, the
function `CopyFrom()` is called to create the `GenericDetails`. This function
copied the `specificProcs_` but failed to copy the `bindingNames_`. If the
function `CheckGeneric()` then gets called, it tries to index into the empty
binding names and causes the crash.
I fixed this by adding code to `CopyFrom()` to copy the binding names.
I also added a test that causes the crash.
Reviewers: klausler, tskeith, DavidTruby
Subscribers: llvm-commits
Tags: #llvm, #flang
Differential Revision: https://reviews.llvm.org/D83491
Summary:
When there are errors in the evaluation of every cosubscript expression in a
coindexed object, the compiler would crash. I fixed this by just checking to
see if there were errors in the evaluation of the cosubscripts before
constructing the `DataRef` for the coindexed object.
Reviewers: klausler, tskeith, DavidTruby
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D83410
Summary:
This change implements support for image selectors and image selector
specifications as described in section 9.6.
In check-coarray[.h,cpp] I changed the `Leave()` function for
`parser::ImageSelectorSpec` to take a `parser::ImageSelector`, which
contains a list of image selector specifications. This allows us to
detect when the same specification is used more than once. I also added
code to analyze the expressions for the image selector specifications to
expression.cpp and a test for all of the conditions to check at
compile-time.
Note that we do not check at compile-time to see if the value of the
cosubscripts are within the specified cobounds. We also do not check anything
related to selecting a valid team. We also do not check that the denotation of
the `stat-variable` is not dependent on the evaluation of an entity in the
same statement.
Reviewers: klausler, tskeith, DavidTruby
Subscribers: llvm-commits
Tags: #llvm, #flang
Differential Revision: https://reviews.llvm.org/D83336
I added 'num_images()' to the list of functions that are evaluated as intrinsic. I also added a test file in flang/test/Semantics to test calls to 'num_images()'. There was a call to 'num_images()' in flang/test/Semantics/call10.f90 that expected an error, now it no longer produces an error. So I edited that file accordingly. I also edited the intrinsics unit test to add further testing of 'num_images()'.
Differential Revision: https://reviews.llvm.org/D83142
Summary:
This patch enhances parser support for flush construct to OpenMP 5.0 by including memory-order-clause.
2.18.8 flush Construct
!$omp flush [memory-order-clause] [(list)]
where memory-order-clause is
acq_rel
release
acquire
The patch includes code changes and testcase modifications.
Reviewed By: klausler, kiranchandramohan
Differential Revision: https://reviews.llvm.org/D82177
Summary:
A program may erroneously reference the same name as both a data object
and as a function. Some of these references were causing an internal
error in expression analysis.
It was already the case that a symbol referenced in a parse tree for a
call was changed from an `Entity` to a `ProcEntity`. I added code to
detect when a symbol was referenced in a parse tree as an array element
gets changed from an `Entity` to an `ObjectEntity`. Then, if an
`ObjectEntity` gets called as a function or a `ProcEntity` gets
referenced as a data object, errors get emitted.
This analysis was previously confined to the name resolution of the
specification part of a `ProgramTree`. I added a pass to the execution
part of a `ProgramTree` to catch names declared in blocks.
Reviewers: tskeith, klausler, DavidTruby
Subscribers: llvm-commits
Tags: #llvm, #flang
Differential Revision: https://reviews.llvm.org/D82903
Add `hasAlternateReturns` to `evaluate::ProcedureRef`.
Add `HasAlternateReturns` to test subprogram symbols.
Fix `label01.F90` test: It was checking that "error: " didn't appear in
the output. But that was erroneously matching a warning that ends
"would be in error:". So change it to check for ": error: " instead.
Differential Revision: https://reviews.llvm.org/D83007
Implement cross-set EQUIVALENCE impossibility checking; fixes
an infinite loop on an erroneous test. Also fix substring
reference offset calculations in EQUIVALENCE discovered to
be incorrect during testing.
Reviewed By: tskeith
Differential Revision: https://reviews.llvm.org/D82993
Port the remaining tests which only require mechanical changes and delete
test_any.sh.
* Delete old RUN lines
* Replace:
EXEC: ${F18} ... | ${FileCheck} ...
with
RUN: %f18 .. | FileCheck ...
* Prepend RUN line with not when it is expected to fail
Also reinstate a de-activated EXEC line and port it in the same way.
Differential Revision: https://reviews.llvm.org/D82168
These tests checked for stdout and stderr in the same pipe, which does not
come out in a guaranteed order. test_any.sh's FileCheck accepts CHECK lines in
any order while FileCheck checks must match in order.
Hand port these to pipe stdout to a temp file which is checked with a separate
FileCheck RUN line to test it.
Differential Revision: https://reviews.llvm.org/D82167
test_any.sh's FileCheck accepts the CHECK line matches in any order while
FileCheck checks in strict order. Re-order the CHECK lines to source code
order - they come from an ordered datastructure.
Some CHECK lines are sensitive to line number which are fixed up manually.
getsymbols02 had multiple test inputs which had their own EXEC lines.
Consolidate these together in one file.
Differential Revision: https://reviews.llvm.org/D82166
These tests are sensitive to line numbers in the input and check output.
They also successively write to a temporary file then check that.
Fix the line number issues and replace the temporary file use with successive
calls to FileCheck with different check-prefixes.
Differential Revision: https://reviews.llvm.org/D82165
The regex syntax used by test_any.sh's FileCheck is sometimes incompatible with
real FileCheck.
Hand port these tests to use FileCheck and it's regex format.
Also remove FIXME from label01 that no longer applies.
Also add second run-line that enables all tests.
Add some new FIXMEs for issues in original tests
Differential Revision: https://reviews.llvm.org/D82164
Treat function result like dummy argument: a SAVE statement without an
entity-list does not make it saved.
Differential Revision: https://reviews.llvm.org/D82309
Summary:
This patch enhances parser support for flush construct to OpenMP 5.0 by including memory-order-clause.
2.18.8 flush Construct
!$omp flush [memory-order-clause] [(list)]
where memory-order-clause is
acq_rel
release
acquire
The patch includes code changes and testcase modifications.
Reviewed By: klausler, kiranchandramohan
Differential Revision: https://reviews.llvm.org/D82177
Implement rest of DATA statement semantics and conversion of
DATA statement initializations into static initializers of
objects in their symbol table entries.
Reviewed By: tskeith, PeteSteinfeld
Differential Revision: https://reviews.llvm.org/D82207
Rolls up small changes across the frontend to prepare for the large
forthcoming patch (part 4/4) that completes DATA statement processing
via conversion to initializers.
Reviewed By: PeteSteinfeld
Differential Revision: https://reviews.llvm.org/D82137
Summary:
We weren't handling the case of subroutines with alternate returns that
are contained in modules. I changed the code to add an `*` as the name
of the parameter when creating the `.mod` file.
Reviewers: tskeith, klausler, DavidTruby
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82096
I added a test the exercises all of the cases instances of specification expressions as defined in section 10.1.11.
Summary: [flang] Added test for specification expressions
Reviewers: tskeith, klausler, DavidTruby
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D81759
When we encountered a type name in a derived type definition, we were
sometimes finding a component of that name rather than the type from
the enclosing scope. Fix this by introducing `NonDerivedTypeScope()` to
start the search in the right scope.
Differential Revision: https://reviews.llvm.org/D81493
Summary:
If you create an expression with parse errors, the `parser::Expr.typedExpr`
will be empty, which causes a compiler crash. The crash is caused by the
check in check-do-forall.cpp that scans all expresssions to see if `DO`
variables are being modified.
It turned out that the problem was that I was fetching subexpressions of type
`parser::Expr`, which are not guaranteed to have a non-null `typedExpr`. I
fixed this by only grabbing the top-level expression from which to gather
arguments as part of the DO loop analysis. This, in turn, exposed a problem
where I wasn't collecting all of the actual arguments in an expression. This
was caused by the fact that I wasn't recursing through the rest of the
expression after finding an argument. I fixed this by recursing through the
argument in the member function in `CollectActualArgumentsHelper`.
Reviewers: klausler, tskeith, DavidTruby
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D81101
Summary:
Using a forward reference to define a `len` parameter causes a crash.
The underlying cause was that a previously declared type had an
erroneous expression for its `LEN` param value. When this expression
was referenced to evaluate a subsequent expression, bad things happened.
I fixed this by putting in code to detect this case.
Reviewers: tskeith, klausler, DavidTruby
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80593
Summary:
Fortran::evaluate::IsConstantExpr did not check that the numerator
was a constant expression. This patch fixes the issue.
Reviewers: DavidTruby, klausler, schweitz, PeteSteinfeld, jdoerfert, sscalpone
Reviewed By: klausler, PeteSteinfeld, sscalpone
Subscribers: llvm-commits
Tags: #llvm, #flang
Differential Revision: https://reviews.llvm.org/D81096
Summary
- Implemented C876, C877
- Fixed IsConstantExpr to check C879
- Fixed bugs in few test cases - data01.f90, block-data01.f90,
pre-fir-tree02.f90
- Modified implementation of C8106 to identify all automatic objects
and modified equivalence01.f90 to reflect the changes
Differential Revision: https://reviews.llvm.org/D78424
Summary:
We were not detecting declaring multiple interfaces to the same procedure.
Also, we were not handling the initialization of entitiies where the associated
Symbol had previously had errors.
I added the function `IsInterfaceSet()` to ProcEntityDetails to see if
the value of `interface_` had been previously set. I then checked this
function before calling set_interface() and emitted an error message if
the interface was already set.
Also, in situations where we were emitting error messages for symbols, I
set the Error flag on the Symbol. Then when performing initialization
on the Symbol, I first check to see if the Symbol had an error.
Reviewers: tskeith, klausler, DavidTruby
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80453
Summary:
Many of these were already implemented, and I just annotated the tests and/or
the code.
C752 was a simple check to verify that CONTIGUOUS components are arrays with
C754 proved to be virtually identical to C750 that I implemented previously.
This caused me to remove the distinction between specification expressions for
type parameters and bounds expressions that I'd previously created.
the POINTER attribute.
I also changed the error messages to specify that errors in specification
expressions could arise from either bad derived type components or type
parameters.
In cases where we detect a type param that was not declared, I created a symbol
marked as erroneous. That avoids subsequent semantic process for expressions
containing the symbol. This change caused me to adjust tests resolve33.f90 and
resolve34.f90. Also, I avoided putting out error messages for erroneous type
param symbols in `OkToAddComponent()` in resolve-names.cpp and in
`EvaluateParameters()`, type.cpp.
C756 checks that procedure components have the POINTER attribute.
Reviewers: tskeith, klausler, DavidTruby
Subscribers: llvm-commits
Tags: #llvm, #flang
Differential Revision: https://reviews.llvm.org/D79798
Summary:
If the value in the collapse close is negative f18 abort without the correct error message. This PR change the size_t in name resolution to a int64_t and check appropriately for negative or zero before the privatization of induction variable.
The correct error is then catch by the OpenMP structure check.
This diff is migrated from the GitHub pull request https://github.com/flang-compiler/f18/pull/1098
Reviewers: ichoyjx, jdoerfert, sscalpone, DavidTruby
Reviewed By: ichoyjx, sscalpone, DavidTruby
Subscribers: sscalpone, klausler, yaxunl, guansong, llvm-commits
Tags: #llvm, #flang
Differential Revision: https://reviews.llvm.org/D77821
When a module contained an import of a use-association of a
use-association, we weren't recognizing that the symbols was needed.
The fix is the follow all of the use-associations using `GetUltimate()`.
Differential Revision: https://reviews.llvm.org/D79737
There were several different ways of handling the option to f18 to
find predefined modules:
- test_errors.sh was created by cmake substituting
FLANG_INTRINSIC_MODULES_DIR into test_errors.sh.in
- some tests used the flang script which has the option built it
- some tests used %f18_with_includes which was replaced by the path
to f18 plus the -I option
- some included -I../../include/flang in their run command
To make this more consistent, change %f18 to include the
-intrinsic-module-directory option and use it everywhere, including
to replace %flang and %f18_with_includes. This requires changing all
of the invocations of the test scripts to put %f18 at the end so that
it can expand to more than one argument.
This eliminates the need to generate test_errors.sh which means we
don't need flang/test/Semantics/CMakeLists.txt or the %B substitution.
That makes the test_errors.sh command like the others, replacing
%B/test/Semantics/test_errors.sh with %S/test_errors.sh.
Also remove the OPTIONS: functionality as custom options can be included
in the RUN: command. And remove -I/../../include/flang as that is now
always included.
Differential Revision: https://reviews.llvm.org/D79634
Summary:
Initially on github I worked on semantic checks.Then I tried some compile-time
test of the rank value, they were failing as there were no symbols
generated for them inside SELECT RANK's scope.So I went further to
add new symbol in each scope, also added the respective 'rank: '
field for a symbol when we dump the symboltable. I added a field to
keep track of the rank in AssocEntityDetails class.This caused shape
analysis framework to become inconsistent. So shape analysis framework
was updated to handle this new representation.
* I added more tests for above changes.
* On phabricator I addressed some minor changes.
* Lastly I worked on review comments.
Reviewers: klausler,sscalpone,DavidTruby,kiranchandramohan,tskeith,anchu-rajendran,kiranktp
Reviewed By:klausler, DavidTruby, tskeith
Subscribers:#flang-commits, #llvm-commits
Tags: #flang, #llvm
Differential Revision: https://reviews.llvm.org/D78623
IsDescriptor was returning false for a component whose shape depended
on a length parameter. Change it to return true for any array with
non-constant bounds.
Differential Revision: https://reviews.llvm.org/D79349
Summary: I updated the code that produces the message and the associated test.
Reviewers: sscalpone, DavidTruby, kiranchandramohan
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79514
Summary: I updated the code that produces the message and the associated test.
Reviewers: sscalpone, DavidTruby
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79514
Objects in common blocks have offsets relative to the start of the
common block, independent of the enclosing scope, so they are processed
first. Add alignment to CommonBlockDetails to record the required
alignment of the common block.
For equivalence sets, each object depends on the one that is forced to
occur first in memory. The rest are recorded in the dependents_ map and
have offsets assigned after the other symbols are done.
Differential Revision: https://reviews.llvm.org/D79347
Summary:
Most of these checks were already implemented, and I just added references to
them to the code and tests. Also, much of this code was already
reviewed in the old flang/f18 GitHub repository, but I didn't get to
merge it before we switched repositories.
I implemented the check for C747 to not allow coarray components in derived
types that are of type C_PTR, C_FUNPTR, or type TEAM_TYPE.
I implemented the check for C748 that requires a data component whose type has
a coarray ultimate component to be a nonpointer, nonallocatable scalar and not
be a coarray.
I implemented the check for C750 that adds additional restrictions to the
bounds expressions of a derived type component that's an array.
These bounds expressions are sepcification expressions as defined in
10.1.11. There was already code in lib/Evaluate/check-expression.cpp to
check semantics for specification expressions, but it did not check for
the extra requirements of C750.
C750 prohibits specification functions, the intrinsic functions
ALLOCATED, ASSOCIATED, EXTENDS_TYPE_OF, PRESENT, and SAME_TYPE_AS. It
also requires every specification inquiry reference to be a constant
expression, and requires that the value of the bound not depend on the
value of a variable.
To implement these additional checks, I added code to the intrinsic proc
table to get the intrinsic class of a procedure. I also added an
enumeration to distinguish between specification expressions for
derived type component bounds versus for type parameters. I then
changed the code to pass an enumeration value to
"CheckSpecificationExpr()" to indicate that the expression was a bounds
expression and used this value to determine whether to emit an error
message when violations of C750 are found.
I changed the implementation of IsPureProcedure() to handle statement
functions and changed some references in the code that tested for the
PURE attribute to call IsPureProcedure().
I also fixed some unrelated tests that got new errors when I implemented these
new checks.
Reviewers: tskeith, DavidTruby, sscalpone
Subscribers: jfb, llvm-commits
Tags: #llvm, #flang
Differential Revision: https://reviews.llvm.org/D79263
Summary:
I found a small test case that caused a crash when derived type
definitions have parameters without definitions.
Reviewers: tskeith, klausler, DavidTruby
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79282
Summary:
This includes a refactor of the existing combined construct checks
that were present, as well as adding the remaining combined constructs
that had not been implemented yet.
Reviewers: jdoerfert
Subscribers: yaxunl, guansong, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77812
Summary:
Updates recent work on DATA statement semantic checking in
flang/lib/Semantics/check-data.{h,cpp} to use the compiler's
internal representation for typed expressions rather than working
on the raw parse tree. Saves the analyzed expressions for DATA
statement values as parse tree decorations because they'll soon be
needed in lowering. Corrects wording of some error messages.
Fixes a bug in constant expression checking: structure constructors
are not constant expressions if they set an allocatable component
to anything other than NULL.
Includes infrastructure changes to make this work, some renaming
to reflect the fact that the implied DO loop indices tracked by
expression analysis are not (just) from array constructors, remove
some dead code, and improve some comments.
Reviewers: tskeith, sscalpone, jdoerfert, DavidTruby, anchu-rajendran, schweitz
Reviewed By: tskeith, anchu-rajendran, schweitz
Subscribers: llvm-commits, flang-commits
Tags: #flang, #llvm
Differential Revision: https://reviews.llvm.org/D78834
Summary:
Add size and offset properties to symbols, representing their byte size
and offset within their enclosing scope.
Add size and align properties to scopes so that they are available for
scopes representing derived types.
Add ComputeOffsets pass over the symbol table to fill in those fields.
Compute descriptor size based on rank and length parameters. Extract
DerivedTypeSpec::NumLengthParameters from DynamicType::RequiresDescriptor
to share the code.
Add Scope::GetSymbols to get symbols in canonical order.
compute-offsets.cpp and mod-file.cpp both need to process symbols in the
order in which they are declared. Move the collecting of those symbols
into Scope so that it can be shared.
Add symbol size and offset to output of `-fdebug-dump-symbols` and use
that in some tests.
Still to do:
- make size and alignment rules configurable based on target
- use offsets to check EQUIVALENCE statements
Differential Revision: https://reviews.llvm.org/D78680
Currently, many `Flang :: Semantics` tests FAIL on Solaris. The failure
mode is always the same:
actual at 67: Name in ALLOCATE statement must be a variable name
expect at 67: ERROR: Name in ALLOCATE statement must be a variable name
It turns out the issue is twofold here:
- The awk script embedded in `flang/test/Semantics/common.sh` uses a string
value for `FS`, which isn't supported by traditional awk as documented in
the GNU autoconf manual.
- Even though /usr/gnu/bin (with gawk installed as awk) is in my build
environment's `PATH`, still /bin/awk is used
Although the proper fix would probably be to avoid the unportability, it's
easy to work around it for now. `common.sh` above is the only script in
the whole tree that for unknown reasons overrides `PATH` to
`/usr/bin:/bin`, unnecessarily creating this mess in the first place. Just
removing that setting easily avoids the issue.
Tested on `amd64-pc-solaris2.11` and `sparcv9-sun-solaris2.11`.
Differential Revision: https://reviews.llvm.org/D78550
In most cases, I just added the contraint names to the code and tests.
I implemented the following checks:
- C736 A child type with a coarray ultimate component must have a parent with
a coarray ultimate component.
- C737 A child type with and EVENT_TYPE or LOCK_TYPE component must have a
parent either which is EVENT_TYPE or LOCK_TYPE or a type with an EVENT_TYPE
or LOCK_TYPE component.
- C740 Sequence types must contain at least on component
- C740 Data components of sequence types must either be of an intrinsic type
or a sequenced derived type.
After implementing these checks, some tests had new errors unrelated to their
original purpose, so I fixed them.
Original-commit: flang-compiler/f18@098f01bc47
Reviewed-on: https://github.com/flang-compiler/f18/pull/1097
In general all the basic functionality seems to work and removes some redundancy
and more complicated features in favor of borrowing infrastructure from LLVM
build configurations. Here's a quick summary of details and remaining issues:
* Testing has spanned Ubuntu 18.04 & 19.10, CentOS 7, RHEL 8, and
MacOS/darwin. Architectures include x86_64 and Arm. Without
access to Window nothing has been tested there yet.
* As we change file and directory naming schemes (i.e.,
capitalization) some odd things can occur on MacOS systems with
case preserving but not case senstive file system configurations.
Can be painful and certainly something to watch out for as any
any such changes continue.
* Testing infrastructure still needs to be tuned up and worked on.
Note that there do appear to be cases of some tests hanging (on
MacOS in particular). They appear unrelated to the build
process.
* Shared library configurations need testing (and probably fixing).
* Tested both standalone and 'in-mono repo' builds. Changes for
supporting the mono repo builds will require LLVM-level changes that
are straightforward when the time comes.
* The configuration contains a work-around for LLVM's C++ standard mode
passing down into Flang/F18 builds (i.e., LLVM CMake configuration would
force a -std=c++11 flag to show up in command line arguments. The
current configuration removes that automatically and is more strict in
following new CMake guidelines for enforcing C++17 mode across all the
CMake files.
* Cleaned up a lot of repetition in the command line arguments. It
is likely that more work is still needed to both allow for
customization and working around CMake defailts (or those
inherited from LLVM's configuration files). On some platforms agressive
optimization flags (e.g. -O3) can actually break builds due to the inlining
of templates in .cpp source files that then no longer are available for use
cases outside those source files (shows up as link errors). Sticking at -O2
appears to fix this. Currently this CMake configuration forces this in
release mode but at the cost of stomping on any CMake, or user customized,
settings for the release flags.
* Made the lit tests non-source directory dependent where appropriate. This is
done by configuring certain test shell files to refer to the correct paths
whether an in or out of tree build is being performed. These configured
files are output in the build directory. A %B substitution is introduced in
lit to refer to the build directory, mirroring the %S substitution for the
source directory, so that the tests can refer to the configured shell scripts.
Co-authored-by: David Truby <david.truby@arm.com>
Original-commit: flang-compiler/f18@d1c7184159
Reviewed-on: https://github.com/flang-compiler/f18/pull/1045
The full list of constraints is C727, C728, C729, C730, C743, C755, C759, C778,
and C1543.
I added a function to tools.cpp to check to see if a symbol name is the name
of an intrinsic type.
The biggest change was to resolve-names.cpp to check to see if attributes were
either duplicated or in conflict with each other. I changed all locations
where attributes were set to check for duplicates or conflicts.
I also added tests for all checks and annotated the tests and code with the
numbers of the constraints being tested/checked.
Original-commit: flang-compiler/f18@3f30e8a61e
Reviewed-on: https://github.com/flang-compiler/f18/pull/1084
The previous code had handling for cases when too many file descriptors may be
opened; this is not necessary with MemoryBuffer as the file descriptors are
closed after the mapping occurs. MemoryBuffer also internally handles the case
where a file is small and therefore an mmap is bad for performance; such files
are simply copied to memory after being opened.
Many places elsewhere in the code assume that the buffer is not empty, and the
old file opening code handles this by replacing an empty file with a buffer
containing a single newline. That behavior is now kept in the new MemoryBuffer
based code.
Original-commit: flang-compiler/f18@d34df84351
Reviewed-on: https://github.com/flang-compiler/f18/pull/1032
When a module subprogram has the MODULE prefix the following must match
with the corresponding separate module procedure interface body:
- C1549: characteristics and dummy argument names
- C1550: binding label
- C1551: NON_RECURSIVE prefix
SubprogramMatchHelper performs all of these checks.
Rename separate-module-procs.f90 to separate-mp01.f90 so we can have
separate-mp02.f90 (etc).
Make ShapesAreCompatible public in characteristics.h.
Add Scope::IsSubmodule.
Original-commit: flang-compiler/f18@d121578af1
Reviewed-on: https://github.com/flang-compiler/f18/pull/1080
A separate-module-subprogram is declared as `module procedure ...`
and gets its characteristics from the declaration of that name as
a separate module procedure. When we encounter one, we need to create
symbols in the new subprogram scope for the dummy arguments and
function return (if any).
The failure to create these symbols led to the bug in issue flang-compiler/f18#1054:
when a dummy argument was referenced, the compiler interpreted it as
an implicit declaration because there was no symbol for the argument.
Fixesflang-compiler/f18#1054.
Original-commit: flang-compiler/f18@4d3c4bac84
Reviewed-on: https://github.com/flang-compiler/f18/pull/1080
Tree-same-pre-rewrite: false
When we encounter a ProcDecl and a symbol for it has already been
created, replace the CharBlock for the name with the one in the ProcDecl
as it is the "main" declaration of that name. This matches what is done
for an EntityDecl.
This moves the location of some error messages to a better source
location so update the affected tests.
Original-commit: flang-compiler/f18@514c0f2c94
Reviewed-on: https://github.com/flang-compiler/f18/pull/1080
Tree-same-pre-rewrite: false
Fix omp-nested01.f90 so that it is not an expected failure. The test was
never enabled but I'm guessing this is what it's supposed to do.
Fix the instructions to include "make test" as part of running tests.
Original-commit: flang-compiler/f18@c351181cab
Reviewed-on: https://github.com/flang-compiler/f18/pull/1075
We have re-classified a subset of the regression tests as unit tests and
now we are porting the remaining ones.
Test discovery and running is now performed by lit rather than ctest.
The tests continue to use their original scripts with minor
modifications. Most of the changes were mechanical and so scripted.
A few changes were made by hand. Details
Manual:
* modfile09-*.f90 tests depend on being run together as some tests have
dependencies on modules created by other tests. This will need
separating out when porting away from test_modfile.sh, but for now,
added modfile09-*.f90 to the Inputs directory and added a single
tests modfile09.f90 to hold the run line.
* getdefinition03-a.f90 includes a non-test file getdefinition03-b.f90.
Manually edited the former to find the latter in Inputs so as to add
only one test.
* Same pattern for getsymbols03-{a,b}.f90
Auto:
* Remaining tests have a lit RUN line added to them based on the type
of test they are.
* Failing tests also have an XFAIL line added to them.
* Generic tests have their pre-existing RUN lines replaced with the
word "EXEC" to avoid conflict with the added lit RUN line.
Original-commit: flang-compiler/f18@63ec0af9f4
Reviewed-on: https://github.com/flang-compiler/f18/pull/1027
Tree-same-pre-rewrite: false
These tests were disabled due to https://github.com/flang-compiler/f18/issues/407.
Previously these tests caused F18 to crash as the feature was not fully
implemented.
The altreturn feature is now implemented, so these tests can be
re-enabled. altreturn03 tested some negative cases which F18 correctly
diagnoses. Modified that test to expect these new error messages. Also
make the later cases in the test reachable.
These tests can now be ported by the script to lit-style tests.
Change-Id: Ib336c10d55068d9a26fc2deb43ad052e74e73456
Original-commit: flang-compiler/f18@4de19d7ba2
Reviewed-on: https://github.com/flang-compiler/f18/pull/1027
Tree-same-pre-rewrite: false
Scan FORMAT strings locally to avoid C++ binary runtime dependence when computing deepest parenthesis nesting
Remove a dependency on ostream from runtime
Remove remaining direct external references from runtime to C++ library binaries
Remove runtime dependences on lib/common
SetPos() and SetRec()
Instantiate templates for input
Begin input; rearrange locking, deal with CLOSE races
View()
Update error message in test to agree with compiler change
First cut at real input
More robust I/O runtime error handling
Debugging of REAL input
Add iostat.{h,cpp}
Rename runtime/numeric-* to runtime/edit-*
Move templates around, templatize integer output editing
Move LOGICAL and CHARACTER output from io-api.cpp to edit-output.cpp
Change pointer argument to reference
More list-directed input
Complex list-directed input
Use enum class Direction rather than bool for templates
Catch up with changes to master
Undo reformatting of Lower code
Use record number instead of subscripts for internal unit
Unformatted sequential backspace
Testing and debugging
Dodge bogus GCC warning
Add <cstddef> for std::size_t to fix CI build
Address review comments
Original-commit: flang-compiler/f18@50406b3496
Reviewed-on: https://github.com/flang-compiler/f18/pull/1053
The check for whether a private component is accessible was depending on
determining whether the source range of the current scope was within the
source range of the module that the component was declared in. This
could fail if the current scope was of kind `ImpliedDos` and had no
source range.
The fix is to add `Scope::Contains` to check the relationship by
traversing the parent links. These are created when the Scope is so are
always reliable. The source range of a scope is built up over time.
Original-commit: flang-compiler/f18@d787108637
Reviewed-on: https://github.com/flang-compiler/f18/pull/1060
If the pure context check succeeds, call `WhyNotModifiable` to verify
the LHS can be modified.
Detect assignment to whole assumed-size array.
Change `IsVariable` to return false for a parameter or a component or
array reference whose base it a parameter.
When analyzing an assignment statement, report an error if the LHS is
a constant expression. Otherwise it might get folded and when we detect
the problem later the error will be confusing.
Handle Substring on LHS of assignment. Change ExtractDataRef and IsVariable
to work on a Substring.
Fix IsImpliedShape and IsAssumedSize predicates in ArraySpec.
Fix C709 check in check-declarations.cpp.
Original-commit: flang-compiler/f18@f2d2657aab
Reviewed-on: https://github.com/flang-compiler/f18/pull/1050
When a misparsed FunctionReference was converted to a StructureConstructor,
the components accessed were not checked for accessibility.
The conversion happens in expression analysis so that where the accessibity
must be checked. So move `CheckAccessibleComponent` to `tools.h` so that it
can be shared by `resolve-names.cpp` and `expression.cpp`.
Add FindModuleContaining to help implement this and use it other places.
Check that an access-spec can only appear in a module.
Remove some unnecessary "semantics::" qualifiers.
Original-commit: flang-compiler/f18@99ce156e49
Reviewed-on: https://github.com/flang-compiler/f18/pull/1046
When something is parsed as an array element it was sometimes intended
to be a function call or structure constructor. So if the base name is
not found the errors can be confusing. This is an attempt to improve
them.
When the subscript list is empty, it was probably meant to be a function
call, so report that the name is not a function.
If the base is a scalar but there are subscripts, report that it is not
an array.
Original-commit: flang-compiler/f18@e2fd5333ff
Reviewed-on: https://github.com/flang-compiler/f18/pull/1039
Data statements contains expressions but they are not wrapped in one of
the kinds of parse tree nodes that are analyzed, like `parser::Expr`.
So potential errors were not discovered.
Change `ExprChecker` to handle `DataStmtConstant` and analyze any
expressions that are contained in it. Note that the analyzed form of
the expression is not yet saved in the parse tree.
Original-commit: flang-compiler/f18@8bdaf0a521
Reviewed-on: https://github.com/flang-compiler/f18/pull/1044
I've updated the compiler and test source with references to the contraints at
the points where they were enforced and tested. Many of these were already
implemented and required no code change. A few constraint checks were both
implemented and tested, and I only added references to the constraint
numbers in the compiler source and tests. Here are the things I had to
implement:
Constraint C716 states that, in a REAL constant, if both a kind-param and an
exponent letter appear, the exponent letter must be 'E'.
Constraints C715 and C719 require that a KIND value be actually implemented.
Constraint C722 requires that functions that return assumed-length character
types are external.
Constraint C726 disallows assumed lenght charater types for dummy arguments and
return types.
Original-commit: flang-compiler/f18@45998741e5
Reviewed-on: https://github.com/flang-compiler/f18/pull/1031
Tree-same-pre-rewrite: false
In a data statement like `data x / a(1) /`, `a(1)` may be an array
element or a structure constructor. It is parsed as an array element
so if it turns out `a` is a derived type it must be rewritten as a
strucutre constructor.
Original-commit: flang-compiler/f18@a2b2a330e7
Reviewed-on: https://github.com/flang-compiler/f18/pull/1024
Pete Steinfeld