Added initial support for L2 parallelism in SPMD mode. Note, though,
that the orphaned parallel directives are not currently supported in
SPMD mode.
llvm-svn: 332016
This is similar to the LLVM change https://reviews.llvm.org/D46290.
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\@brief'); do perl -pi -e 's/\@brief //g' $i & done
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46320
llvm-svn: 331834
Added initial codegen for level 2, 3 etc. parallelism. Currently, all
the second, the third etc. parallel regions will run sequentially.
llvm-svn: 331642
Found via codespell -q 3 -I ../clang-whitelist.txt
Where whitelist consists of:
archtype
cas
classs
checkk
compres
definit
frome
iff
inteval
ith
lod
methode
nd
optin
ot
pres
statics
te
thru
Patch by luzpaz! (This is a subset of D44188 that applies cleanly with a few
files that have dubious fixes reverted.)
Differential revision: https://reviews.llvm.org/D44188
llvm-svn: 329399
variables.
Added emission of the offloading data sections for the variables within
declare target regions + fixes emission of the declare target variables
marked as declare target not within the declare target region.
llvm-svn: 328888
When the declare target variables are emitted for the device,
constructors|destructors for these variables must emitted and registered
by the runtime in the offloading sections.
llvm-svn: 328705
If the generic codegen is enabled and private copy of the original
variable escapes the declaration context, this private copy should be
globalized just like it was the original variable.
llvm-svn: 327985
If the variable is captured by value and the corresponding parameter in
the outlined function escapes its declaration context, this parameter
must be globalized. To globalize it we need to get the address of the
original parameter, load the value, store it to the global address and
use this global address instead of the original.
Patch improves globalization for parallel|teams regions + functions in
declare target regions.
llvm-svn: 327654
Summary: Remove this scheme for now since it will be covered by another more generic scheme using global memory. This code will be worked into an optimization for the generic data sharing scheme. Removing this completely and then adding it via future patches will make all future data sharing patches cleaner.
Reviewers: ABataev, carlo.bertolli, caomhin
Reviewed By: ABataev
Subscribers: jholewinski, guansong, cfe-commits
Differential Revision: https://reviews.llvm.org/D43625
llvm-svn: 326948
Summary:
This patch is part of the development effort to add support in the current OpenMP GPU offloading implementation for implicitly sharing variables between a target region executed by the team master thread and the worker threads within that team.
This patch is the first of three required for successfully performing the implicit sharing of master thread variables with the worker threads within a team. The remaining two patches are:
- Patch D38978 to the LLVM NVPTX backend which ensures the lowering of shared variables to an device memory which allows the sharing of references;
- Patch (coming soon) is a patch to libomptarget runtime library which ensures that a list of references to shared variables is properly maintained.
A simple code snippet which illustrates an implicit data sharing situation is as follows:
```
#pragma omp target
{
// master thread only
int v;
#pragma omp parallel
{
// worker threads
// use v
}
}
```
Variable v is implicitly shared from the team master thread which executes the code in between the target and parallel directives. The worker threads must operate on the latest version of v, including any updates performed by the master.
The code generated in this patch relies on the LLVM NVPTX patch (mentioned above) which prevents v from being lowered in the thread local memory of the master thread thus making the reference to this variable un-shareable with the workers. This ensures that the code generated by this patch is correct.
Since the parallel region is outlined the passing of arguments to the outlined regions must preserve the original order of arguments. The runtime therefore maintains a list of references to shared variables thus ensuring their passing in the correct order. The passing of arguments to the outlined parallel function is performed in a separate function which the data sharing infrastructure constructs in this patch. The function is inlined when optimizations are enabled.
Reviewers: hfinkel, carlo.bertolli, arpith-jacob, Hahnfeld, ABataev, caomhin
Reviewed By: ABataev
Subscribers: cfe-commits, jholewinski
Differential Revision: https://reviews.llvm.org/D38976
llvm-svn: 318773
Arguments, passed to the outlined function, must have correct address
space info for proper Debug info support. Patch sets global address
space for arguments that are mapped and passed by reference.
Also, cuda-gdb does not handle reference types correctly, so reference
arguments are represented as pointers.
llvm-svn: 310387
Arguments, passed to the outlined function, must have correct address
space info for proper Debug info support. Patch sets global address
space for arguments that are mapped and passed by reference.
Also, cuda-gdb does not handle reference types correctly, so reference
arguments are represented as pointers.
llvm-svn: 310377
Arguments, passed to the outlined function, must have correct address
space info for proper Debug info support. Patch sets global address
space for arguments that are mapped and passed by reference.
Also, cuda-gdb does not handle reference types correctly, so reference
arguments are represented as pointers.
llvm-svn: 310360
Arguments, passed to the outlined function, must have correct address
space info for proper Debug info support. Patch sets global address
space for arguments that are mapped and passed by reference.
Also, cuda-gdb does not handle reference types correctly, so reference
arguments are represented as pointers.
llvm-svn: 310104
This patch implements codegen for the reduction clause on
any parallel construct for elementary data types. An efficient
implementation requires hierarchical reduction within a
warp and a threadblock. It is complicated by the fact that
variables declared in the stack of a CUDA thread cannot be
shared with other threads.
The patch creates a struct to hold reduction variables and
a number of helper functions. The OpenMP runtime on the GPU
implements reduction algorithms that uses these helper
functions to perform reductions within a team. Variables are
shared between CUDA threads using shuffle intrinsics.
An implementation of reductions on the NVPTX device is
substantially different to that of CPUs. However, this patch
is written so that there are minimal changes to the rest of
OpenMP codegen.
The implemented design allows the compiler and runtime to be
decoupled, i.e., the runtime does not need to know of the
reduction operation(s), the type of the reduction variable(s),
or the number of reductions. The design also allows reuse of
host codegen, with appropriate specialization for the NVPTX
device.
While the patch does introduce a number of abstractions, the
expected use case calls for inlining of the GPU OpenMP runtime.
After inlining and optimizations in LLVM, these abstractions
are unwound and performance of OpenMP reductions is comparable
to CUDA-canonical code.
Patch by Tian Jin in collaboration with Arpith Jacob
Reviewers: ABataev
Differential Revision: https://reviews.llvm.org/D29758
llvm-svn: 295333
This patch implements codegen for the reduction clause on
any parallel construct for elementary data types. An efficient
implementation requires hierarchical reduction within a
warp and a threadblock. It is complicated by the fact that
variables declared in the stack of a CUDA thread cannot be
shared with other threads.
The patch creates a struct to hold reduction variables and
a number of helper functions. The OpenMP runtime on the GPU
implements reduction algorithms that uses these helper
functions to perform reductions within a team. Variables are
shared between CUDA threads using shuffle intrinsics.
An implementation of reductions on the NVPTX device is
substantially different to that of CPUs. However, this patch
is written so that there are minimal changes to the rest of
OpenMP codegen.
The implemented design allows the compiler and runtime to be
decoupled, i.e., the runtime does not need to know of the
reduction operation(s), the type of the reduction variable(s),
or the number of reductions. The design also allows reuse of
host codegen, with appropriate specialization for the NVPTX
device.
While the patch does introduce a number of abstractions, the
expected use case calls for inlining of the GPU OpenMP runtime.
After inlining and optimizations in LLVM, these abstractions
are unwound and performance of OpenMP reductions is comparable
to CUDA-canonical code.
Patch by Tian Jin in collaboration with Arpith Jacob
Reviewers: ABataev
Differential Revision: https://reviews.llvm.org/D29758
llvm-svn: 295319
This patch adds support for the proc_bind clause on the Spmd construct
'target parallel' on the NVPTX device. Since the parallel region is created
upon kernel launch, this clause can be safely ignored on the NVPTX device at
codegen time for level 0 parallelism.
Reviewers: ABataev
Differential Revision: https://reviews.llvm.org/D29128
llvm-svn: 293069
This patch adds support for the Spmd construct 'target parallel' on the
NVPTX device. This involves ignoring the num_threads clause on the device
since the number of threads in this combined construct is already set on
the host through the call to __tgt_target_teams().
Reviewers: ABataev
Differential Revision: https://reviews.llvm.org/D29083
llvm-svn: 292999
This patch adds codegen for the 'target parallel' directive on the NVPTX
device. We term offload OpenMP directives such as 'target parallel' and
'target teams distribute parallel for' as SPMD constructs. SPMD constructs,
in contrast to Generic ones like the plain 'target', can never contain
a serial region.
SPMD constructs can be handled more efficiently on the GPU and do not
require the Warp Loop of the Generic codegen scheme. This patch adds
SPMD codegen support for 'target parallel' on the NVPTX device and can
be reused for other SPMD constructs.
Reviewers: ABataev
Differential Revision: https://reviews.llvm.org/D28755
llvm-svn: 292428
This patch adds support for codegen of 'target parallel' on the host.
It is also the first combined directive that requires two or more
captured statements. Support for this functionality is included in
the patch.
A combined directive such as 'target parallel' has two captured
statements, one for the 'target' and the other for the 'parallel'
region. Two captured statements are required because each has
different implicit parameters (see SemaOpenMP.cpp). For example,
the 'parallel' has 'global_tid' and 'bound_tid' while the 'target'
does not. The patch adds support for handling multiple captured
statements based on the combined directive.
When codegen'ing the 'target parallel' directive, the 'target'
outlined function is created using the outer captured statement
and the 'parallel' outlined function is created using the inner
captured statement.
Reviewers: ABataev
Differential Revision: https://reviews.llvm.org/D28753
llvm-svn: 292419
This patch adds support for codegen of 'target parallel' on the host.
It is also the first combined directive that requires two or more
captured statements. Support for this functionality is included in
the patch.
A combined directive such as 'target parallel' has two captured
statements, one for the 'target' and the other for the 'parallel'
region. Two captured statements are required because each has
different implicit parameters (see SemaOpenMP.cpp). For example,
the 'parallel' has 'global_tid' and 'bound_tid' while the 'target'
does not. The patch adds support for handling multiple captured
statements based on the combined directive.
When codegen'ing the 'target parallel' directive, the 'target'
outlined function is created using the outer captured statement
and the 'parallel' outlined function is created using the inner
captured statement.
Reviewers: ABataev
Differential Revision: https://reviews.llvm.org/D28753
llvm-svn: 292374
Summary:
This patch introduces support for the execution of parallel constructs in a target
region on the NVPTX device. Parallel regions must be in the lexical scope of the
target directive.
The master thread in the master warp signals parallel work for worker threads in worker
warps on encountering a parallel region.
Note: The patch does not yet support capture of arguments in a parallel region so
the test cases are simple.
Reviewers: ABataev
Differential Revision: https://reviews.llvm.org/D28145
llvm-svn: 291565
Summary:
This patch adds two fields to the offload entry descriptor. One field is meant to signal Ctors/Dtors and `link` global variables, and the other is reserved for runtime library use.
Currently, these fields are only filled with zeros in the current code generation, but that will change when `declare target` is added.
The reason, we are adding these fields now is to make the code generation consistent with the runtime library proposal under review in https://reviews.llvm.org/D14031.
Reviewers: ABataev, hfinkel, carlo.bertolli, kkwli0, arpith-jacob, Hahnfeld
Subscribers: cfe-commits, caomhin, jholewinski
Differential Revision: https://reviews.llvm.org/D28298
llvm-svn: 291124
This patch includes updates for codegen of the target region for the NVPTX
device. It moves initializers from the compiler to the runtime and updates
the worker loop to assume parallel work is retrieved from the runtime. A
subsequent patch will update the codegen to retrieve the parallel work using
calls to the runtime. It includes the removal of the inline attribute
for the worker loop and disabling debug info in it.
This allows codegen for a target directive and serial execution on the
NVPTX device.
Reviewers: ABataev
Differential Revision: https://reviews.llvm.org/D28125
llvm-svn: 291121
This patch includes updates for codegen of the target region for the NVPTX
device. It moves initializers from the compiler to the runtime and updates
the worker loop to assume parallel work is retrieved from the runtime. A
subsequent patch will update the codegen to retrieve the parallel work using
calls to the runtime. It includes the removal of the inline attribute
for the worker loop and disabling debug info in it.
This allows codegen for a target directive and serial execution on the
NVPTX device.
Reviewers: ABataev
Differential Revision: https://reviews.llvm.org/D28125
llvm-svn: 290983
This patch cleans up private methods for NVPTX OpenMP codegen. It converts private
members to static functions to follow the coding style of CGOpenMPRuntime.cpp and
declutter the header file.
Reviewers: ABataev
Differential Revision: https://reviews.llvm.org/D28124
llvm-svn: 290904
program
Offload related code is not quite ready yet, but some simple examples
must not crash the compiler. Patch fixes the problem in offloading code
with exceptions.
llvm-svn: 290364
This patch implements the teams directive for the NVPTX backend. It is different from the host code generation path as it:
Does not call kmpc_fork_teams. All necessary teams and threads are started upon touching the target region, when launching a CUDA kernel, and their execution is coordinated through sequential and parallel regions within the target region.
Does not call kmpc_push_num_teams even if a num_teams of thread_limit clause is present. Setting the number of teams and the thread limit is implemented by the nvptx-related runtime.
Please note that I am now passing a Clang Expr * to emitPushNumTeams instead of the originally chosen llvm::Value * type. The reason for that is that I want to avoid emitting expressions for num_teams and thread_limit if they are not needed in the target region.
http://reviews.llvm.org/D17963
llvm-svn: 265304
Solution unifies interface of RegionCodeGenTy type to allow insert
runtime-specific code before/after main codegen action defined in
CGStmtOpenMP.cpp file. Runtime should not define its own RegionCodeGenTy
for general OpenMP directives, but must be allowed to insert its own
(required) code to support target specific codegen.
llvm-svn: 264700
Solution unifies interface of RegionCodeGenTy type to allow insert
runtime-specific code before/after main codegen action defined in
CGStmtOpenMP.cpp file. Runtime should not define its own RegionCodeGenTy
for general OpenMP directives, but must be allowed to insert its own
(required) code to support target specific codegen.
llvm-svn: 264576
Solution unifies interface of RegionCodeGenTy type to allow insert
runtime-specific code before/after main codegen action defined in
CGStmtOpenMP.cpp file. Runtime should not define its own RegionCodeGenTy
for general OpenMP directives, but must be allowed to insert its own
(required) code to support target specific codegen.
llvm-svn: 264569
Summary:
This patch adds base support for codegen of the target directive on the NVPTX device.
Reviewers: ABataev
Differential Revision: http://reviews.llvm.org/D17877
Reworked test case after buildbot failure on windows.
Updated patch to integrate r263837 and test case nvptx_target_firstprivate_codegen.cpp.
llvm-svn: 264018
Summary:
Reworked test case after buildbot failure on windows.
This patch adds base support for codegen of the target directive on the NVPTX device.
Reviewers: ABataev
Differential Revision: http://reviews.llvm.org/D17877
llvm-svn: 263783
Summary:
This patch adds base support for codegen of the target directive on the NVPTX device.
Reviewers: ABataev
Differential Revision: http://reviews.llvm.org/D17877
llvm-svn: 263587
Alexey Bataev