Summary:
GIMatchTree's job is to build a decision tree by zipping all the
GIMatchDag's together.
Each DAG is added to the tree builder as a leaf and partitioners are used
to subdivide each node until there are no more partitioners to apply. At
this point, the code generator is responsible for testing any untested
predicates and following any unvisited traversals (there shouldn't be any
of the latter as the getVRegDef partitioner handles them all).
Note that the leaves don't always fit into partitions cleanly and the
partitions may overlap as a result. This is resolved by cloning the leaf
into every partition it belongs to. One example of this is a rule that can
match one of N opcodes. The leaf for this rule would end up in N partitions
when processed by the opcode partitioner. A similar example is the
getVRegDef partitioner where having rules (add $a, $b), and (add ($a, $b), $c)
will result in the former being in the partition for successfully
following the vreg-def and failing to do so as it doesn't care which
happens.
Depends on D69151
Fixed the issues with the windows bots which were caused by stdout/stderr
interleaving.
Reviewers: bogner, volkan
Reviewed By: volkan
Subscribers: lkail, mgorny, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69152
All the windows bots are failing match-tree.td and there's no obvious cause that
I can see. It's not just the %p formatting problem. My best guess is that
there's an ordering issue too but I'll need further information to figure that
out. Revert while I'm investigating.
This reverts commit 64f1bb5cd2 and 77d4b5f5fe
Summary:
GIMatchTree's job is to build a decision tree by zipping all the
GIMatchDag's together.
Each DAG is added to the tree builder as a leaf and partitioners are used
to subdivide each node until there are no more partitioners to apply. At
this point, the code generator is responsible for testing any untested
predicates and following any unvisited traversals (there shouldn't be any
of the latter as the getVRegDef partitioner handles them all).
Note that the leaves don't always fit into partitions cleanly and the
partitions may overlap as a result. This is resolved by cloning the leaf
into every partition it belongs to. One example of this is a rule that can
match one of N opcodes. The leaf for this rule would end up in N partitions
when processed by the opcode partitioner. A similar example is the
getVRegDef partitioner where having rules (add $a, $b), and (add ($a, $b), $c)
will result in the former being in the partition for successfully
following the vreg-def and failing to do so as it doesn't care which
happens.
Depends on D69151
Reviewers: bogner, volkan
Reviewed By: volkan
Subscribers: lkail, mgorny, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69152
Summary:
This is used by the extending_loads combine to tell the apply step which
use is the preferred one to fold and the other uses should be re-written
to consume.
Depends on D69117
Reviewers: volkan, bogner
Reviewed By: volkan
Subscribers: hiraditya, Petar.Avramovic, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69147
This reverts commit e62e760f29.
The issue @uweigand raised should have been fixed by iterating over the
vector that owns the operand list data instead of the FoldingSet.
The MSVC issue raised by @thakis should have been fixed by relaxing the
regexes a little. I don't have a Windows machine available to test that so
I tested it by using `perl -p -e 's/0x([0-9a-f]+)/\U\1\E/g' to convert the
output of %p to the windows style.
I've guessed at the issue @phosek raised as there wasn't enough information
to investigate it. What I think is happening on that bot is the -debug
option isn't available because the second stage build is a release build.
I'm not sure why other release-mode bots didn't report it though.
and follow-on patches.
This is breaking a few build bots and local builds with follow-up already
on the patch thread.
This reverts commits 390c8baa54 and
520e3d66e7.
Summary:
When we build the walk across these DAG's we need to be able to reach every node
from the roots. Flip and traversal edges (so that use->def becomes def->uses)
that make nodes unreachable. Note that early on we'll just error out on these
flipped edges as def->uses edges are more complicated to match due to their
one->many nature.
Depends on D69077
Reviewers: volkan, bogner
Subscribers: llvm-commits
Summary:
The MatchDag structure is a representation of the checks that need to be
performed and the dependencies that limit when they can happen.
There are two kinds of node in the MatchDag:
* Instrs - Represent a MachineInstr
* Predicates - Represent a check that needs to be performed (i.e. opcode, is register, same machine operand, etc.)
and two kinds of edges:
* (Traversal) Edges - Represent a register that can be traversed to find one instr from another
* Predicate Dependency Edges - Indicate that a predicate requires a piece of information to be tested.
For example, the matcher:
(match (MOV $t, $s),
(MOV $d, $t))
with MOV declared as an instruction of the form:
%dst = MOV %src1
becomes the following MatchDag with the following instruction nodes:
__anon0_0 // $t=getOperand(0), $s=getOperand(1)
__anon0_1 // $d=getOperand(0), $t=getOperand(1)
traversal edges:
__anon0_1[src1] --[t]--> __anon0_0[dst]
predicate nodes:
<<$mi.getOpcode() == MOV>>:$__anonpred0_2
<<$mi.getOpcode() == MOV>>:$__anonpred0_3
and predicate dependencies:
__anon0_0 ==> __anonpred0_2[mi]
__anon0_0 ==> __anonpred0_3[mi]
The result of this parse is currently unused but can be tested
using -gicombiner-stop-after-parse as done in parse-match-pattern.td. The
dump for testing includes a graphviz format dump to allow the rule to be
viewed visually.
Later on, these MatchDag's will be used to generate code and to build an
efficient decision tree.
Reviewers: volkan, bogner
Reviewed By: volkan
Subscribers: arsenm, mgorny, mgrang, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69077
Summary:
Each generated helper can be configured to generate an option that disables
rules in that helper. This can be used to bisect rulesets.
The disable bits are stored in a SparseVector as this is very cheap for the
common case where nothing is disabled. It gets more expensive the more rules
are disabled but you're generally doing that for debug purposes where
performance is less of a concern.
Depends on D68426
Reviewers: volkan, bogner
Reviewed By: volkan
Subscribers: hiraditya, Petar.Avramovic, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68438
llvm-svn: 375067
Summary:
This is just moving the existing C++ code around and will be NFC w.r.t
AArch64. Renamed 'CombineBr' to something more descriptive
('ElideByByInvertingCond') at the same time.
The remaining combines in AArch64PreLegalizeCombiner require features that
aren't implemented at this point and will be hoisted as they are added.
Depends on D68424
Reviewers: bogner, volkan
Subscribers: kristof.beyls, hiraditya, Petar.Avramovic, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68426
llvm-svn: 375057
Summary:
This will handle expansion of C++ fragments in the declarative combiner
including custom predicates, and escapes into C++ to aid the migration
effort.
Fixed the -DLLVM_LINK_LLVM_DYLIB=ON using DISABLE_LLVM_LINK_LLVM_DYLIB when
creating the library. Apparently it automatically links to libLLVM.dylib
and we don't want that from tablegen.
Reviewers: bogner, volkan
Subscribers: mgorny, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68288
> llvm-svn: 373551
llvm-svn: 373651
Summary:
This will handle expansion of C++ fragments in the declarative combiner
including custom predicates, and escapes into C++ to aid the migration
effort.
Reviewers: bogner, volkan
Subscribers: mgorny, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68288
llvm-svn: 373551
Summary:
This is the first of a series of patches extracted from a much bigger WIP
patch. It merely establishes the tblgen pass and the way empty combiner
helpers are declared and integrated into a combiner info.
The tablegen pass takes a -combiners option to select the combiner helper
that will be generated. This can be given multiple values to generate
multiple combiner helpers at once. Doing so helps to minimize parsing
overhead.
The reason for creating a GlobalISel subdirectory in utils/TableGen is that
there will be quite a lot of non-pass files (~15) by the time the patch
series is done.
Reviewers: volkan
Subscribers: mgorny, hiraditya, simoncook, Petar.Avramovic, s.egerton, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68286
llvm-svn: 373527
Daniel Sanders