This requires std::intializer_list to be a literal type, which it is
starting with C++14. The downside is that std::bitset is still not
constexpr-friendly so this change contains a re-implementation of most
of it.
Shrinks clang by ~60k.
llvm-svn: 369847
Now that we've moved to C++14, we no longer need the llvm::make_unique
implementation from STLExtras.h. This patch is a mechanical replacement
of (hopefully) all the llvm::make_unique instances across the monorepo.
llvm-svn: 369013
If an assembly instruction has to mention an input operand name twice,
for example the MVE VMOV instruction that accesses two lanes of the
same vector by writing 'vmov r1, r2, q0[3], q0[1]', then the obvious
way to write its AsmString is to include the same operand (here $Qd)
twice. But this causes the AsmMatcher generator to omit that
instruction completely from the match table, on the basis that the
generator isn't clever enough to deal with the duplication.
But you need to have _some_ way of dealing with an instruction like
this - and in this case, where the mnemonic is shared with many other
instructions that the AsmMatcher does handle, it would be very painful
to take it out of the AsmMatcher system completely.
A nicer way is to add a custom AsmMatchConverter routine, and let that
deal with the problem if the autogenerated converter can't. But that
doesn't work, because TableGen leaves the instruction out of its table
_even_ if you provide a custom converter.
Solution: this change, which makes TableGen relax the restriction on
duplicated operands in the case where there's a custom converter.
Patch by: Simon Tatham
Differential Revision: https://reviews.llvm.org/D60695
llvm-svn: 362066
We were using the number of Matchables rather than the number of rows in the converter table.
This only matters for a few of the targets where the number of matchables is more than 255, but the number of converters is less than 255. Many of the targets have more than 256 converters. So already required a uint16_t.
llvm-svn: 357527
AMDGPU target run out of Subtarget feature flags hitting the limit of 64.
AssemblerPredicates uses at most uint64_t for their representation.
At the same time CodeGen has exhausted this a long time ago and switched
to a FeatureBitset with the current limit of 192 bits.
This patch completes transition to the bitset for feature bits extending
it to asm matcher and MC code emitter.
Differential Revision: https://reviews.llvm.org/D59002
llvm-svn: 355839
Summary:
While working on the GISel Combiner, I noticed I was producing location-less
error messages fairly often and set about fixing this. In the process, I
noticed quite a few places elsewhere in TableGen that also neglected to include
a relevant location.
This patch adds locations to errors that relate to a specific record (or a
field within it) and also have easy access to the relevant location. This is
particularly useful when multiclasses are involved as many of these errors
refer to the full name of a record and it's difficult to guess which substring
is grep-able.
Unfortunately, tablegen currently only supports Record granularity so it's not
currently possible to point at a specific Init so these sometimes point at the
record that caused the error rather than the precise origin of the error.
Reviewers: bogner, aditya_nandakumar, volkan, aemerson, paquette, nhaehnle
Reviewed By: nhaehnle
Subscribers: jdoerfert, nhaehnle, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58077
llvm-svn: 353862
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Summary:
By using the existing isCodeGenOnly bit in the tablegen defs, as
suggested by tlively in https://reviews.llvm.org/D51662
Tested: llvm-lit -v `find test -name WebAssembly`
Reviewers: tlively
Subscribers: dschuff, sbc100, jgravelle-google, aheejin, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D52373
llvm-svn: 342772
Summary:
This ensures we have the non-register version of the instruction.
The stack version of call_indirect now wants a type index argument,
so that has been added in the existing tests.
Tested:
llvm-lit -v `find test -name WebAssembly`
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, aheejin, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D51662
llvm-svn: 342753
isSubsetOf() could be very slow if the hierarchy of the RegisterClasses
of the target is very complicated.
This is mainly caused by the fact that isSubset() is called
multiple times over the same SuperClass of a register class
if this ends up being the super class of a register class
from multiple paths.
Differential Revision: https://reviews.llvm.org/D49124
llvm-svn: 337020
Allow a tied operand of a different operand class in InstAliases,
so that the operand can be printed (and added to the MC instruction)
as the appropriate register. For example, 'GPR64as32', which would
be printed/parsed as a 32bit register and should match a tied 64bit
register operand, where the former is a sub-register of the latter.
This patch also generalizes the constraint checking to an overrideable
method in MCTargetAsmParser, so that target asmparsers can specify
whether a given operand satisfies the tied register constraint.
Reviewers: olista01, rengolin, fhahn, SjoerdMeijer, samparker, dsanders, craig.topper
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D47714
llvm-svn: 334942
Unlike CodeGenInstruction, CodeGenInstAlias was flatting asm strings in its constructor. For instructions it was the users responsibility to flatten the string.
AsmMatcherEmitter didn't know this and treated them the same. This caused double flattening of InstAliases. This is mostly harmless unless the desired assembly string contains curly braces. The second flattening wouldn't know to ignore these and would remove the curly braces. And for variant 1 it would remove the contents of them as well.
To mitigate this, this patch makes removes the flattening from the CodeGenIntAlias constructor and modifies AsmWriterEmitter to account for the flattening not having been done.
llvm-svn: 334919
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
- Manual change to APInt
- Manually chage DOCS as regex doesn't match it.
In the transition period the DEBUG() macro is still present and aliased
to the LLVM_DEBUG() one.
Differential Revision: https://reviews.llvm.org/D43624
llvm-svn: 332240
See r331124 for how I made a list of files missing the include.
I then ran this Python script:
for f in open('filelist.txt'):
f = f.strip()
fl = open(f).readlines()
found = False
for i in xrange(len(fl)):
p = '#include "llvm/'
if not fl[i].startswith(p):
continue
if fl[i][len(p):] > 'Config':
fl.insert(i, '#include "llvm/Config/llvm-config.h"\n')
found = True
break
if not found:
print 'not found', f
else:
open(f, 'w').write(''.join(fl))
and then looked through everything with `svn diff | diffstat -l | xargs -n 1000 gvim -p`
and tried to fix include ordering and whatnot.
No intended behavior change.
llvm-svn: 331184
An optional, light-weight and backward-compatible mechanism to allow
specifying that a diagnostic _only_ applies to a partial mismatch (NearMiss),
rather than a full mismatch.
Patch [1/2] in a series to improve assembler diagnostics for SVE.
- Patch [1/2]: https://reviews.llvm.org/D45879
- Patch [2/2]: https://reviews.llvm.org/D45880
Reviewers: olista01, stoklund, craig.topper, mcrosier, rengolin, echristo, fhahn, SjoerdMeijer, evandro, javed.absar
Reviewed By: olista01
Differential Revision: https://reviews.llvm.org/D45879
llvm-svn: 330930
Summary:
This is a bit of a reimplementation the work done in
https://reviews.llvm.org/D41446, since that patch only really works for
tied operands of instructions, not aliases.
Instead of checking the constraints based on the matched instruction's opcode,
this patch uses the match-info's convert function to check the operand
constraints for that specific instruction/alias.
This is based on the matched operands for the instruction, not the
resulting opcode of the MCInst.
This patch adds the following enum/table to the *GenAsmMatcher.inc file:
enum {
Tie0_1_1,
Tie0_1_2,
Tie0_1_5,
...
};
const char TiedAsmOperandTable[][3] = {
/* Tie0_1_1 */ { 0, 1, 1 },
/* Tie0_1_2 */ { 0, 1, 2 },
/* Tie0_1_5 */ { 0, 1, 5 },
...
};
And it is referenced directly in the ConversionTable, like this:
static const uint8_t ConversionTable[CVT_NUM_SIGNATURES][13] = {
...
{ CVT_95_addRegOperands, 1,
CVT_95_addRegOperands, 2,
CVT_Tied, Tie0_1_5,
CVT_95_addRegOperands, 6, CVT_Done },
...
The Tie0_1_5 (and corresponding table) encodes that:
* Result operand 0 is the operand to copy (which is e.g. done when
building up the operands to the MCInst in convertToMCInst())
* Asm operands 1 and 5 should be the same operands (which is checked
in checkAsmTiedOperandConstraints()).
Reviewers: olista01, rengolin, fhahn, craig.topper, echristo, apazos, dsanders
Reviewed By: olista01
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42293
llvm-svn: 324196
Summary:
This extends TableGen's AsmMatcherEmitter with code that generates
a table with tied-operand constraints. The constraints are checked
when parsing the instruction. If an operand is not equal to its tied operand,
the assembler will give an error.
Patch [2/3] in a series to add operand constraint checks for SVE's predicated ADD/SUB.
Reviewers: olista01, rengolin, mcrosier, fhahn, craig.topper, evandro, echristo
Reviewed By: fhahn
Subscribers: javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D41446
llvm-svn: 322166
This patch resubmits the SVE ZIP1/ZIP2 patch series consisting of
of r320992, r320986, r320973, and r320970 by reverting
https://reviews.llvm.org/rL321024.
The issue that caused r321024 has been addressed in https://reviews.llvm.org/rL321158,
so this patch-series should be safe to resubmit.
llvm-svn: 321163
This reverts changes r320992, r320986, r320973, and r320970.
r320970 by itself breaks the test case, and the rest depend on it.
Test case will land soon.
llvm-svn: 321024
Summary: Patch [4/4] in a series to add parsing of predicates and properly parse SVE ZIP1/ZIP2 instructions. This patch further improves diagnostic messages for when the SVE feature is not specified.
Reviewers: rengolin, fhahn, olista01, echristo, efriedma
Reviewed By: fhahn
Subscribers: sdardis, aemerson, javed.absar, tschuett, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D40363
llvm-svn: 320992
Summary:
When emitting a diagnostic for an invalid operand, a specific diagnostic
should only be reported when the instruction being matched is actually
enabled by the feature flags.
Patch [3/4] in a series to add parsing of predicates and properly parse SVE
ZIP1/ZIP2 instructions. This patch fixes bogus diagnostic messages for when
the SVE feature is not specified.
Reviewers: rengolin, craig.topper, olista01, sdardis, stoklund
Reviewed By: olista01, sdardis
Subscribers: fhahn, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D40362
llvm-svn: 320986
Summary:
The generated diagnostic by the AsmMatcher isn't always applicable to the AsmOperand.
This is because the code will only update the diagnostic if it is more
specific than the previous diagnostic. However, when having validated
operands and 'moved on' to a next operand (for some instruction/alias for
which all previous operands are valid), if the diagnostic is InvalidOperand,
than that should be set as the diagnostic, not the more specific message
about a previous operand for some other instruction/alias candidate.
(Re-committed with an extra whitespace in SVEInstrFormats.td to trigger rebuild
of AArch64GenAsmMatcher.inc, since the llvm-clang-x86_64-expensive-checks-win
builder does not seem to rebuild AArch64GenAsmMatcher.inc with the
newly built TableGen due to a missing dependency somewhere (see:
http://lists.llvm.org/pipermail/llvm-dev/2017-December/119555.html))
Reviewers: craig.topper, olista01, rengolin, stoklund
Reviewed By: olista01
Subscribers: javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D40011
llvm-svn: 320711
A number of architectures re-use the same register names (e.g. for both 32-bit
FPRs and 64-bit FPRs). They are currently unable to use the tablegen'erated
MatchRegisterName and MatchRegisterAltName, as tablegen (when built with
asserts enabled) will fail.
When the AllowDuplicateRegisterNames in AsmParser is set, duplicated register
names will be tolerated. A backend can then coerce registers to the desired
register class by (for instance) implementing validateTargetOperandClass.
At least the in-tree Sparc backend could benefit from this, as does RISC-V
(single and double precision floating point registers).
Differential Revision: https://reviews.llvm.org/D39845
llvm-svn: 320018
This is causing a failure in the llvm-clang-x86_64-expensive-checks-win
buildbot, and I can't reproduce it locally, so reverting until I can work out
what is wrong.
llvm-svn: 319654
This adds a "invalid operands for instruction" diagnostic for
instructions where there is an instruction encoding with the correct
mnemonic and which is available for this target, but where multiple
operands do not match those which were provided. This makes it clear
that there is some combination of operands that is valid for the current
target, which the default diagnostic of "invalid instruction" does not.
Since this is a very general error, we only emit it if we don't have a
more specific error.
Differential revision: https://reviews.llvm.org/D36747
llvm-svn: 319649
- We can still emit this error if the actual instruction has two or more
operands missing compared to the expected one.
- We should only emit this error once per instruction.
Differential revision: https://reviews.llvm.org/D36746
llvm-svn: 318770
This is NFC, as the matcher would continue looping up to the maximum
number of operands with no effect, but this should improve performance a
bit, and makes the debug trace clearer.
Differential revision: https://reviews.llvm.org/D36744
llvm-svn: 318769
Summary:
The generated diagnostic by the AsmMatcher isn't always applicable to the AsmOperand.
This is because the code will only update the diagnostic if it is more specific than the previous diagnostic. However, when having validated operands and 'moved on' to a next operand (for some instruction/alias for which all previous operands are valid), if the diagnostic is InvalidOperand, than that should be set as the diagnostic, not the more specific message about a previous operand for some other instruction/alias candidate.
Reviewers: craig.topper, olista01, rengolin, stoklund
Reviewed By: olista01
Subscribers: javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D40011
llvm-svn: 318759
Summary:
Add LLVM_FORCE_ENABLE_DUMP cmake option, and use it along with
LLVM_ENABLE_ASSERTIONS to set LLVM_ENABLE_DUMP.
Remove NDEBUG and only use LLVM_ENABLE_DUMP to enable dump methods.
Move definition of LLVM_ENABLE_DUMP from config.h to llvm-config.h so
it'll be picked up by public headers.
Differential Revision: https://reviews.llvm.org/D38406
llvm-svn: 315590
This adds debug tracing to the table-generated assembly instruction matcher,
enabled by the -debug-only=asm-matcher option.
The changes in the target AsmParsers are to add an MCInstrInfo reference under
a consistent name, so that we can use it from table-generated code. This was
already being used this way for targets that use deprecation warnings, but 5
targets did not have it, and Hexagon had it under a different name to the other
backends.
llvm-svn: 315445
This allows a DiagnosticType and/or DiagnosticString to be associated
with a RegisterClass in tablegen, so that we can emit diagnostics in the
assembler when a register operand is incorrect.
DiagnosticType creates a predictable enum value, which gets returned as
the error code when an operand does not match, and can be used by the
assembly parser to map to a user-facing diagnostic. DiagnosticString
creates an anonymous enum value (currently based on the tablegen class
name), and a function to map from enum values to strings will be
generated. Both of these work the same was as they do for AsmOperand.
This isn't used by any targets yet, but has one (positive) side-effect.
It improves the diagnostic codes returned by validateOperandClass - we
always want to emit the diagnostic that relates to the expected operand
class, but this wasn't always being done when the expected and actual
classes were completely different (token/register/custom). This causes a
few AArch64 diagnostics to be improved, as Match_InvalidOperand was
being returned instead of a specific diagnostic type.
Differential revision: https://reviews.llvm.org/D36691
llvm-svn: 315295
This adds a DiagnosticString member to the AsmOperand tablegen class, so
that the diagnostic text to be used when an assembly operand is
incorrect can be stored in the tablegen description of the operand,
rather than in a separate switch statement in the AsmParser.
If DiagnosticString is used for any operands, tablegen will emit a
getMatchKindDiag function, to map from diagnostic enums to strings.
Differential revision: https://reviews.llvm.org/D31606
llvm-svn: 314803
The current table-generated assembly instruction matcher returns a
64-bit error code when matching fails. Since multiple instruction
encodings with the same mnemonic can fail for different reasons, it uses
some heuristics to decide which message is important.
This heuristic does not work well for targets that have many encodings
with the same mnemonic but different operands, or which have different
versions of instructions controlled by subtarget features, as it is hard
to know which encoding the user was intending to use.
Instead of trying to improve the heuristic in the table-generated
matcher, this patch changes it to report a list of near-miss encodings.
This list contains an entry for each encoding with the correct mnemonic,
but with exactly one thing preventing it from being valid. This thing
could be a single invalid operand, a missing target feature or a failed
target-specific validation function.
The target-specific assembly parser can then report an error message
giving multiple options for instruction variants that the user may have
been trying to use. For example, I am working on a patch to use this for
ARM, which can give this error for an invalid instruction for ARMv6-M:
<stdin>:8:3: error: invalid instruction, multiple near-miss encodings found
adds r0, r1, #0x8
^
<stdin>:8:3: note: for one encoding: instruction requires: thumb2
adds r0, r1, #0x8
^
<stdin>:8:16: note: for one encoding: expected an integer in range [0, 7]
adds r0, r1, #0x8
^
<stdin>:8:16: note: for one encoding: expected a register in range [r0, r7]
adds r0, r1, #0x8
^
This also allows the target-specific assembly parser to apply its own
heuristics to suppress some errors. For example, the error "instruction
requires: arm-mode" is never going to be useful when targeting an
M-profile architecture (which does not have ARM mode).
This patch just adds the target-independent mechanism for doing this,
all targets still use the old mechanism. I've added a bit in the
AsmParser tablegen class to allow targets to switch to this new
mechanism. To use this, the target-specific assembly parser will have to
be modified for the change in signature of MatchInstructionImpl, and to
report errors based on the list of near-misses.
Differential revision: https://reviews.llvm.org/D27620
llvm-svn: 314774
Relanding after fixing UB issue with DefaultOffsets.
Consider the following instruction: "inst.eq $dst, $src" where ".eq"
is an optional flag operand. The $src and $dst operands are
registers. If we parse the instruction "inst r0, r1", the flag is not
present and it will be marked in the "OptionalOperandsMask" variable.
After the matching is complete we call the "convertToMCInst" method.
The current implementation works only if the optional operands are at
the end of the array. The "Operands" array looks like [token:"inst",
reg:r0, reg:r1]. The first operand that must be added to the MCInst
is the destination, the r0 register. The "OpIdx" (in the Operands
array) for this register is 2. However, since the flag is not present
in the Operands, the actual index for r0 should be 1. The flag is not
present since we rely on the default value.
This patch removes the "NumDefaults" variable and replaces it with an
array (DefaultsOffset). This array contains an index for each operand
(excluding the mnemonic). At each index, the array contains the
number of optional operands that should be subtracted. For the
previous example, this array looks like this: [0, 1, 1]. When we need
to access the r0 register, we compute its index as 2 -
DefaultsOffset[1] = 1.
Patch by Alexandru Guduleasa!
Reviewers: SamWot, nhaustov, niravd
Reviewed By: niravd
Subscribers: vitalybuka, llvm-commits
Differential Revision: https://reviews.llvm.org/D35998
llvm-svn: 310254
Mark de Wever