Same as r235145 for the call instruction - the justification, tradeoffs,
etc are all the same. The conversion script worked the same without any
false negatives (after replacing 'call' with 'invoke').
llvm-svn: 235755
See r230786 and r230794 for similar changes to gep and load
respectively.
Call is a bit different because it often doesn't have a single explicit
type - usually the type is deduced from the arguments, and just the
return type is explicit. In those cases there's no need to change the
IR.
When that's not the case, the IR usually contains the pointer type of
the first operand - but since typed pointers are going away, that
representation is insufficient so I'm just stripping the "pointerness"
of the explicit type away.
This does make the IR a bit weird - it /sort of/ reads like the type of
the first operand: "call void () %x(" but %x is actually of type "void
()*" and will eventually be just of type "ptr". But this seems not too
bad and I don't think it would benefit from repeating the type
("void (), void () * %x(" and then eventually "void (), ptr %x(") as has
been done with gep and load.
This also has a side benefit: since the explicit type is no longer a
pointer, there's no ambiguity between an explicit type and a function
that returns a function pointer. Previously this case needed an explicit
type (eg: a function returning a void() function was written as
"call void () () * @x(" rather than "call void () * @x(" because of the
ambiguity between a function returning a pointer to a void() function
and a function returning void).
No ambiguity means even function pointer return types can just be
written alone, without writing the whole function's type.
This leaves /only/ the varargs case where the explicit type is required.
Given the special type syntax in call instructions, the regex-fu used
for migration was a bit more involved in its own unique way (as every
one of these is) so here it is. Use it in conjunction with the apply.sh
script and associated find/xargs commands I've provided in rr230786 to
migrate your out of tree tests. Do let me know if any of this doesn't
cover your cases & we can iterate on a more general script/regexes to
help others with out of tree tests.
About 9 test cases couldn't be automatically migrated - half of those
were functions returning function pointers, where I just had to manually
delete the function argument types now that we didn't need an explicit
function type there. The other half were typedefs of function types used
in calls - just had to manually drop the * from those.
import fileinput
import sys
import re
pat = re.compile(r'((?:=|:|^|\s)call\s(?:[^@]*?))(\s*$|\s*(?:(?:\[\[[a-zA-Z0-9_]+\]\]|[@%](?:(")?[\\\?@a-zA-Z0-9_.]*?(?(3)"|)|{{.*}}))(?:\(|$)|undef|inttoptr|bitcast|null|asm).*$)')
addrspace_end = re.compile(r"addrspace\(\d+\)\s*\*$")
func_end = re.compile("(?:void.*|\)\s*)\*$")
def conv(match, line):
if not match or re.search(addrspace_end, match.group(1)) or not re.search(func_end, match.group(1)):
return line
return line[:match.start()] + match.group(1)[:match.group(1).rfind('*')].rstrip() + match.group(2) + line[match.end():]
for line in sys.stdin:
sys.stdout.write(conv(re.search(pat, line), line))
llvm-svn: 235145
Remove 'inlinedAt:' from MDLocalVariable. Besides saving some memory
(variables with it seem to be single largest `Metadata` contributer to
memory usage right now in -g -flto builds), this stops optimization and
backend passes from having to change local variables.
The 'inlinedAt:' field was used by the backend in two ways:
1. To tell the backend whether and into what a variable was inlined.
2. To create a unique id for each inlined variable.
Instead, rely on the 'inlinedAt:' field of the intrinsic's `!dbg`
attachment, and change the DWARF backend to use a typedef called
`InlinedVariable` which is `std::pair<MDLocalVariable*, MDLocation*>`.
This `DebugLoc` is already passed reliably through the backend (as
verified by r234021).
This commit removes the check from r234021, but I added a new check
(that will survive) in r235048, and changed the `DIBuilder` API in
r235041 to require a `!dbg` attachment whose 'scope:` is in the same
`MDSubprogram` as the variable's.
If this breaks your out-of-tree testcases, perhaps the script I used
(mdlocalvariable-drop-inlinedat.sh) will help; I'll attach it to PR22778
in a moment.
llvm-svn: 235050
Pull the `-preserve-ll-uselistorder` bit up through all the callers of
`Module::print()`. I converted callers of `operator<<` to
`Module::print()` where necessary to pull the bit through.
llvm-svn: 234968
For consistency, start pulling out `-preserve-ll-uselistorder`. I'll
drop the global state for both eventually. This pulls it up to
`Module::print()` (but not past there).
llvm-svn: 234966
Use `MDTypeRef` (etc.) in the new debug info hierarchy rather than raw
`Metadata *` pointers.
I rolled in a change to `DIBuilder` that looks unrelated: take `DIType`
instead of `DITypeRef` as type arguments when creating variables.
However, this was the simplest way to use `MDTypeRef` within the
functions, and didn't require any cleanups from callers in clang (since
they were all passing in `DIType`s anyway, relying on their implicit
conversions to `DITypeRef`).
llvm-svn: 234197
Add operand checks for `MDLexicalBlock` and `MDLexicalBlockFile`. Like
`MDLocalVariable` and `MDLocation`, these nodes always require a scope.
There was no test bitrot to fix here (just updated the serialization
tests in test/Assembler/mdlexicalblock.ll).
llvm-svn: 233561
Check operands of `MDSubprogram`s in the verifier, and update the
accessors and factory functions to use more specific types.
There were a lot of broken testcases, which I fixed in r233466. If you
have out-of-tree tests for debug info, you probably need similar changes
to the ones I made there.
llvm-svn: 233559
Add verify checks for `MDType` subclasses and for `MDCompileUnit`.
These new checks don't yet incorporate everything from `Verify()`, but
at least they sanity check the operands. Also downcast accessors as
possible.
A lot of these accessors can't be downcast as far as we'd like because
of arrays of typed objects (stored in a generic `MDTuple`) and
`MDString`-based type references. Eventually I'll port over `DIRef<>`
and `DITypedArray<>` from `DebugInfo.h` to clean those up as well.
Updated bitrotted testcases separately in r233415 and r233443 to reduce
churn on the off-chance this needs to be reverted.
llvm-svn: 233446
Check fields from `MDLocalVariable` and `MDGlobalVariable` and change
the accessors to downcast to the right types. `getType()` still returns
`Metadata*` since it could be an `MDString`-based reference.
Since local variables require non-null scopes, I also updated `LLParser`
to require a `scope:` field.
A number of testcases had grown bitrot and started failing with this
patch; I committed them separately in r233349. If I just broke your
out-of-tree testcases, you're probably hitting similar problems (so have
a look there).
llvm-svn: 233389
Move all the `MDNode` field helper methods into a new class,
`MDFieldPrinter`, and add helpers for integers, bools, and `DW_*`
symbolic constants. This reduces a ton of code duplication, and makes
it more mechanical to update `AsmWriter` to print broken code in the
context of stricter accessors (like in r233322).
llvm-svn: 233337
Check accessors of `MDLocation`, and change them to `cast<>` down to the
right types. Also add type-safe factory functions.
All the callers that handle broken code need to use the new versions of
the accessors (`getRawScope()` instead of `getScope()`) that still
return `Metadata*`. This is also necessary for things like
`MDNodeKeyImpl<MDLocation>` (in LLVMContextImpl.h) that need to unique
the nodes when their operands might still be forward references of the
wrong type.
In the `Value` hierarchy, consumers that handle broken code use
`getOperand()` directly. However, debug info nodes have a ton of
operands, and their order (even their existence) isn't stable yet. It's
safer and more maintainable to add an explicit "raw" accessor on the
class itself.
llvm-svn: 233322
Use an overload instead of a default argument for `Metadata::dump()`.
The latter seems to require calling `dump(nullptr)` explicitly when
using a debugger, where as the former doesn't.
Other than utility for debugging, there's NFC here.
llvm-svn: 232315
Replumb the `AsmWriter` so that `Metadata::print()` is generally useful.
(Similarly change `Metadata::printAsOperand()`.)
- `SlotTracker` now has a mode where all metadata will be correctly
numbered when initializing a `Module`. Normally, `Metadata` only
referenced from within `Function`s gets numbered when the `Function`
is incorporated.
- `Metadata::print()` and `Metadata::printAsOperand()` (and
`Metadata::dump()`) now take an optional `Module` argument. When
provided, `SlotTracker` is initialized with the new mode, and the
numbering will be complete and consistent for all calls to `print()`.
- `Value::print()` uses the new `SlotTracker` mode when printing
intrinsics with `MDNode` operands, `MetadataAsValue` operands, or the
bodies of functions. Thus, metadata numbering will be consistent
between calls to `Metadata::print()` and `Value::print()`.
- `Metadata::print()` (and `Metadata::dump()`) now print the full
definition of `MDNode`s:
!5 = !{!6, !"abc", !7}
This matches behaviour for `Value::print()`, which includes the name
of instructions.
- Updated call sites in `Verifier` to call `print()` instead of
`printAsOperand()`.
All this, so that `Verifier` can print out useful failure messages that
involve `Metadata` for PR22777.
Note that `Metadata::printAsOperand()` previously took an optional
`bool` and `Module` operand. The former was cargo-culted from
`Value::printAsOperand()` and wasn't doing anything useful. The latter
didn't give consistent results (without the new `SlotTracker` mode).
llvm-svn: 232275
Write the `alloca` array size explicitly when it's non-canonical.
Previously, if the array size was `iX 1` (where X is not 32), the type
would mutate to `i32` when round-tripping through assembly.
The testcase I added fails in `verify-uselistorder` (as well as
`FileCheck`), since the use-lists for `i32 1` and `i64 1` change.
(Manman Ren came across this when running `verify-uselistorder` on some
non-trivial, optimized code as part of PR5680.)
The type mutation started with r104911, which allowed array sizes to be
something other than an `i32`. Starting with r204945, we
"canonicalized" to `i64` on 64-bit platforms -- and then on every
round-trip through assembly, mutated back to `i32`.
I bundled a fixup for `-instcombine` to avoid r204945 on scalar
allocations. (There wasn't a clean way to sequence this into two
commits, since the assembly change on its own caused testcase churn, and
the `-instcombine` change can't be tested without the assembly changes.)
An obvious alternative fix -- change `AllocaInst::AllocaInst()`,
`AsmWriter` and `LLParser` to treat `intptr_t` as the canonical type for
scalar allocations -- was rejected out of hand, since this required
teaching them each about the data layout.
A follow-up commit will add an `-instcombine` to canonicalize the scalar
allocation array size to `i32 1` rather than leaving `iX 1` alone.
rdar://problem/20075773
llvm-svn: 232200
Similar to gep (r230786) and load (r230794) changes.
Similar migration script can be used to update test cases, which
successfully migrated all of LLVM and Polly, but about 4 test cases
needed manually changes in Clang.
(this script will read the contents of stdin and massage it into stdout
- wrap it in the 'apply.sh' script shown in previous commits + xargs to
apply it over a large set of test cases)
import fileinput
import sys
import re
rep = re.compile(r"(getelementptr(?:\s+inbounds)?\s*\()((<\d*\s+x\s+)?([^@]*?)(|\s*addrspace\(\d+\))\s*\*(?(3)>)\s*)(?=$|%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|zeroinitializer|<|\[\[[a-zA-Z]|\{\{)", re.MULTILINE | re.DOTALL)
def conv(match):
line = match.group(1)
line += match.group(4)
line += ", "
line += match.group(2)
return line
line = sys.stdin.read()
off = 0
for match in re.finditer(rep, line):
sys.stdout.write(line[off:match.start()])
sys.stdout.write(conv(match))
off = match.end()
sys.stdout.write(line[off:])
llvm-svn: 232184
Move the specialized metadata nodes for the new debug info hierarchy
into place, finishing off PR22464. I've done bootstraps (and all that)
and I'm confident this commit is NFC as far as DWARF output is
concerned. Let me know if I'm wrong :).
The code changes are fairly mechanical:
- Bumped the "Debug Info Version".
- `DIBuilder` now creates the appropriate subclass of `MDNode`.
- Subclasses of DIDescriptor now expect to hold their "MD"
counterparts (e.g., `DIBasicType` expects `MDBasicType`).
- Deleted a ton of dead code in `AsmWriter.cpp` and `DebugInfo.cpp`
for printing comments.
- Big update to LangRef to describe the nodes in the new hierarchy.
Feel free to make it better.
Testcase changes are enormous. There's an accompanying clang commit on
its way.
If you have out-of-tree debug info testcases, I just broke your build.
- `upgrade-specialized-nodes.sh` is attached to PR22564. I used it to
update all the IR testcases.
- Unfortunately I failed to find way to script the updates to CHECK
lines, so I updated all of these by hand. This was fairly painful,
since the old CHECKs are difficult to reason about. That's one of
the benefits of the new hierarchy.
This work isn't quite finished, BTW. The `DIDescriptor` subclasses are
almost empty wrappers, but not quite: they still have loose casting
checks (see the `RETURN_FROM_RAW()` macro). Once they're completely
gutted, I'll rename the "MD" classes to "DI" and kill the wrappers. I
also expect to make a few schema changes now that it's easier to reason
about everything.
llvm-svn: 231082
While gaining practical experience hand-updating CHECK lines (for moving
the new debug info hierarchy into place), I learnt a few things about
CHECK-ability of the specialized node assembly output.
- The first part of a `CHECK:` is to identify the "right" node (this
is especially true if you intend to use the new `CHECK-SAME`
feature, since the first CHECK needs to identify the node correctly
before you can split the line).
- If there's a `tag:`, it should go first.
- If there's a `name:`, it should go next (followed by the
`linkageName:`, if any).
- If there's a `scope:`, it should follow after that.
- When a node type supports multiple DW_TAGs, but one is implied by
its name and is overwhelmingly more common, the `tag:` field is
terribly uninteresting unless it's different.
- `MDBasicType` is almost always `DW_TAG_base_type`.
- `MDTemplateValueParameter` is almost always
`DW_TAG_template_value_parameter`.
- Printing `name: ""` doesn't improve CHECK-ability, and there are far
more nodes than I realized that are commonly nameless.
- There are a few other fields that similarly aren't very interesting
when they're empty.
This commit updates the `AsmWriter` as suggested above (and makes
necessary changes in `LLParser` for round-tripping).
llvm-svn: 230877
Properly escape string fields in metadata. I've added a spot-check with
direct coverage for `MDFile::getFilename()`, but we'll get more coverage
once the hierarchy is moved into place (since this comes up in various
checked-in testcases).
I've replicated the `if` logic using the `ShouldSkipEmpty` flag
(although a follow-up commit is going to change how often this flag is
specified); no NFCI other than escaping the string fields.
llvm-svn: 230875
Extract logic for escaping a string field in the new debug info
hierarchy from `GenericDebugNode`. A follow-up commit will use it far
more widely (hence the dead code for `ShouldSkipEmpty`).
llvm-svn: 230873
Essentially the same as the GEP change in r230786.
A similar migration script can be used to update test cases, though a few more
test case improvements/changes were required this time around: (r229269-r229278)
import fileinput
import sys
import re
pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)")
for line in sys.stdin:
sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line))
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7649
llvm-svn: 230794
One of several parallel first steps to remove the target type of pointers,
replacing them with a single opaque pointer type.
This adds an explicit type parameter to the gep instruction so that when the
first parameter becomes an opaque pointer type, the type to gep through is
still available to the instructions.
* This doesn't modify gep operators, only instructions (operators will be
handled separately)
* Textual IR changes only. Bitcode (including upgrade) and changing the
in-memory representation will be in separate changes.
* geps of vectors are transformed as:
getelementptr <4 x float*> %x, ...
->getelementptr float, <4 x float*> %x, ...
Then, once the opaque pointer type is introduced, this will ultimately look
like:
getelementptr float, <4 x ptr> %x
with the unambiguous interpretation that it is a vector of pointers to float.
* address spaces remain on the pointer, not the type:
getelementptr float addrspace(1)* %x
->getelementptr float, float addrspace(1)* %x
Then, eventually:
getelementptr float, ptr addrspace(1) %x
Importantly, the massive amount of test case churn has been automated by
same crappy python code. I had to manually update a few test cases that
wouldn't fit the script's model (r228970,r229196,r229197,r229198). The
python script just massages stdin and writes the result to stdout, I
then wrapped that in a shell script to handle replacing files, then
using the usual find+xargs to migrate all the files.
update.py:
import fileinput
import sys
import re
ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
def conv(match, line):
if not match:
return line
line = match.groups()[0]
if len(match.groups()[5]) == 0:
line += match.groups()[2]
line += match.groups()[3]
line += ", "
line += match.groups()[1]
line += "\n"
return line
for line in sys.stdin:
if line.find("getelementptr ") == line.find("getelementptr inbounds"):
if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("):
line = conv(re.match(ibrep, line), line)
elif line.find("getelementptr ") != line.find("getelementptr ("):
line = conv(re.match(normrep, line), line)
sys.stdout.write(line)
apply.sh:
for name in "$@"
do
python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name"
rm -f "$name.tmp"
done
The actual commands:
From llvm/src:
find test/ -name *.ll | xargs ./apply.sh
From llvm/src/tools/clang:
find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}"
From llvm/src/tools/polly:
find test/ -name *.ll | xargs ./apply.sh
After that, check-all (with llvm, clang, clang-tools-extra, lld,
compiler-rt, and polly all checked out).
The extra 'rm' in the apply.sh script is due to a few files in clang's test
suite using interesting unicode stuff that my python script was throwing
exceptions on. None of those files needed to be migrated, so it seemed
sufficient to ignore those cases.
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7636
llvm-svn: 230786
Remove a newline from `AssemblyWriter::printMDNodeBody()`, and add one
to `AssemblyWriter::writeMDNode()`. NFCI for assembly output.
However, this drops an inconsistent newline from `Metadata::print()`
when `this` is an `MDNode`. Now the newline added by `Metadata::dump()`
won't look so verbose.
llvm-svn: 230565
It turns out we have a macro to ensure that debuggers can access
`dump()` methods. Use it. Hopefully this will prevent me (and others)
from committing crimes like in r223802 (search for /10000/, or just see
the fix in r224407).
llvm-svn: 230555
Parse (and write) symbolic constants in debug info `flags:` fields.
This prevents a readability (and CHECK-ability) regression with the new
debug info hierarchy.
Old (well, current) assembly, with pretty-printing:
!{!"...\\0016387", ...} ; ... [public] [rvalue reference]
Flags field without this change:
!MDDerivedType(flags: 16387, ...)
Flags field with this change:
!MDDerivedType(flags: DIFlagPublic | DIFlagRValueReference, ...)
As discussed in the review thread, this isn't a final state. Most of
these flags correspond to `DW_AT_` symbolic constants, and we might
eventually want to support arbitrary attributes in some form. However,
as it stands now, some of the flags correspond to other concepts (like
`FlagStaticMember`); until things are refactored this is the simplest
way to move forward without regressing assembly.
llvm-svn: 230111
When writing the bitcode serialization for the new debug info hierarchy,
I assumed two fields would never be null.
Drop that assumption, since it's brittle (and crashes the
`BitcodeWriter` if wrong), and is a check better left for the verifier
anyway. (No need for a bitcode upgrade here, since the new hierarchy is
still not in place.)
The fields in question are `MDCompileUnit::getFile()` and
`MDDerivedType::getBaseType()`, the latter of which isn't null in
test/Transforms/Mem2Reg/ConvertDebugInfo2.ll (see !14, a pointer to
nothing). While the testcase might have bitrotted, there's no reason
for the bitcode format to rely on non-null for metadata operands.
This also fixes a bug in `AsmWriter` where if the `file:` is null it
isn't emitted (caught by the double-round trip in the testcase I'm
adding) -- this is a required field in `LLParser`.
I'll circle back to ConvertDebugInfo2. Once the specialized nodes are
in place, I'll be trying to turn the debug info verifier back on by
default (in the newer module pass form committed r206300) and throwing
more logic in there. If the testcase has bitrotted (as opposed to me
not understanding the schema correctly) I'll fix it then.
llvm-svn: 229960
Follow-up to r229740, which removed `DITemplate*::getContext()` after my
upgrade script revealed that scopes are always `nullptr` for template
parameters. This is the other shoe: drop `scope:` from
`MDTemplateParameter` and its two subclasses. (Note: a bitcode upgrade
would be pointless, since the hierarchy hasn't been moved into place.)
llvm-svn: 229791
Put the name before the value in assembly for `MDEnum`. While working
on the testcase upgrade script for the new hierarchy, I noticed that it
"looks nicer" to have the name first, since it lines the names up in the
(somewhat typical) case that they have a common prefix.
llvm-svn: 229747
Duncan P. N. Exon Smith