Summary:
This check flags all usages of static_cast, where a base class is casted
to a derived class.
In those cases, a fixit is provided to convert the cast to a
dynamic_cast.
Use of these casts can violate type safety and cause the program to
access a variable that is actually of type X to be accessed as if it
were of an unrelated type Z.
This rule is part of the "Type safety" profile of the C++ Core
Guidelines, see
https://github.com/isocpp/CppCoreGuidelines/blob/master/CppCoreGuidelines.md#-type2-dont-use-static_cast-downcasts-use-dynamic_cast-instead
Depends on D13313
Reviewers: alexfh, sbenza, bkramer, aaron.ballman
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D13368
llvm-svn: 250098
Add support for the `-fdebug-prefix-map=` option as in GCC. The syntax is
`-fdebug-prefix-map=OLD=NEW`. When compiling files from a path beginning with
OLD, change the debug info to indicate the path as start with NEW. This is
particularly helpful if you are preprocessing in one path and compiling in
another (e.g. for a build cluster with distcc).
Note that the linearity of the implementation is not as terrible as it may seem.
This is normally done once per file with an expectation that the map will be
small (1-2) entries, making this roughly linear in the number of input paths.
Addresses PR24619.
llvm-svn: 250094
This will allow us to optimize C++ template code with Polly. This support is
mostly for debugging purpose and individual experiments. The ultimate goal is
still to run Polly later in the pass manager when inlining already happened.
llvm-svn: 250092
instead of llvm::PassManagerBuilder::EP_EarlyAsPossible. This will allow us
to run actual module passes in Polly's canonicalization sequence, but should
otherwise have only little impact.
llvm-svn: 250091
This fixes a bug where one can take the address of a conditionally
enabled function to drop its enable_if guards. For example:
int foo(int a) __attribute__((enable_if(a > 0, "")));
int (*p)(int) = &foo;
int result = p(-1); // compilation succeeds; calls foo(-1)
Overloading logic has been updated to reflect this change, as well.
Functions with enable_if attributes that are always true are still
allowed to have their address taken.
Differential Revision: http://reviews.llvm.org/D13607
llvm-svn: 250090
In JumpThreading pass, the branch weight metadata is not updated after CFG modification. Consider the jump threading on PredBB, BB, and SuccBB. After jump threading, the weight on BB->SuccBB should be adjusted as some of it is contributed by the edge PredBB->BB, which doesn't exist anymore. This patch tries to update the edge weight in metadata on BB->SuccBB by scaling it by 1 - Freq(PredBB->BB) / Freq(BB->SuccBB).
Differential revision: http://reviews.llvm.org/D10979
llvm-svn: 250089
We made them SP relative back in March (r233137) because that's the
value the runtime passes to EH functions. With the new cleanuppad IR,
funclets adjust their frame argument from SP to FP, so our offsets
should now be FP-relative.
llvm-svn: 250088
Function LowerVSETCC (in X86ISelLowering.cpp) worked under the wrong
assumption that for non-AVX512 targets, the source type and destination type
of a type-legalized setcc node were always the same type.
This assumption was unfortunately incorrect; the type legalizer is not always
able to promote the return type of a setcc to the same type as the first
operand of a setcc.
In the case of a vsetcc node, the legalizer firstly checks if the first input
operand has a legal type. If so, then it promotes the return type of the vsetcc
to that same type. Otherwise, the return type is promoted to the 'next legal
type', which, for vectors of MVT::i1 is always a 128-bit integer vector type.
Example (-mattr=+avx):
%0 = trunc <8 x i32> %a to <8 x i23>
%1 = icmp eq <8 x i23> %0, zeroinitializer
The initial selection dag for the code above is:
v8i1 = setcc t5, t7, seteq:ch
t5: v8i23 = truncate t2
t2: v8i32,ch = CopyFromReg t0, Register:v8i32 %vreg1
t7: v8i32 = build_vector of all zeroes.
The type legalizer would firstly check if 't5' has a legal type. If so, then it
would reuse that same type to promote the return type of the setcc node.
Unfortunately 't5' is of illegal type v8i23, and therefore it cannot be used to
promote the return type of the setcc node. Consequently, the setcc return type
is promoted to v8i16. Later on, 't5' is promoted to v8i32 thus leading to the
following dag node:
v8i16 = setcc t32, t25, seteq:ch
where t32 and t25 are now values of type v8i32.
Before this patch, function LowerVSETCC would have wrongly expanded the setcc
to a single X86ISD::PCMPEQ. Surprisingly, ISel was still able to match an
instruction. In our case, ISel would have matched a VPCMPEQWrr:
t37: v8i16 = X86ISD::VPCMPEQWrr t36, t25
However, t36 and t25 are both VR256, while the result type is instead of class
VR128. This inconsistency ended up causing the insertion of COPY instructions
like this:
%vreg7<def> = COPY %vreg3; VR128:%vreg7 VR256:%vreg3
Which is an invalid full copy (not a sub register copy).
Eventually, the backend would have hit an UNREACHABLE "Cannot emit physreg copy
instruction" in the attempt to expand the malformed pseudo COPY instructions.
This patch fixes the problem adding the missing logic in LowerVSETCC to handle
the corner case of a setcc with 128-bit return type and 256-bit operand type.
This problem was originally reported by Dimitry as PR25080. It has been latent
for a very long time. I have added the minimal reproducible from that bugzilla
as test setcc-lowering.ll.
Differential Revision: http://reviews.llvm.org/D13660
llvm-svn: 250085
set to true, but all plans run by RunThreadPlan need to have this set to false so they will
return control to RunThreadPlan without consulting plans higher on the stack.
Since this seems like a common error, I also modified RunThreadPlan to enforce this behavior.
<rdar://problem/22543166>
llvm-svn: 250084
strictly necessary because RunToAddress is always used as a subsidiary plan, so
it's ShouldStop seldom matters. But get it right anyway.
llvm-svn: 250083
Fixed a bug where we'd emit multiple diagnostics if there was a problem
taking the address of an overloaded template function.
Differential Revision: http://reviews.llvm.org/D13664
llvm-svn: 250078
This was a minor bug in r249492. Calling PrepareEHLandingPad on a
non-landingpad was a no-op, but it attempted to get the generic pointer
register class, which apparently doesn't exist for some targets.
llvm-svn: 250068
Summary:
Many small improvements to LLVM_BUILD_EXTERNAL_COMPILER_RT.
* Works correctly with Ninja by working around CMake Bug 14771 (https://cmake.org/Bug/view.php?id=14771)
* Has install-compiler-rt target, and installs as part of the default install target
* Sets the install paths properly so that it matches the non-standalone build
* Only generate the test targets if(LLVM_INCLUDE_TESTS)
Reviewers: samsonov, Bigcheese
Differential Revision: http://reviews.llvm.org/D13399
llvm-svn: 250064
In order to actually verify the condition, we have to use a weak symbol.
If an undefined symbol is not used at all, it is naturally ignored not by
the code for --as-needed but by the code for something else.
llvm-svn: 250062
This is a more principled version of what I did earlier. Path
normalization is generally a good thing, but may break users in strange
environments, e. g. using lots of symlinks. Let the user choose and
default it to on.
This also changes adding a duplicated file into returning an error if
the file contents are different instead of an assertion failure.
Differential Revision: http://reviews.llvm.org/D13658
llvm-svn: 250060
On targets where f32 is not legal, we have to look through a BITCAST SDNode to
find the register that an argument is stored in when emitting debug info, or we
will not be able to emit a DW_AT_location for it.
Differential Revision: http://reviews.llvm.org/D13005
llvm-svn: 250056
Matthias Gehre