This is similar to D93760.
When something is wrong with the hash table header we dump
its context as a raw data.
Currently we have the calculation overflow issue and it is possible to
bypass the validation we have (and crash).
The patch fixes it.
Differential revision: https://reviews.llvm.org/D93799
It was discussed in D92545 that we might want to improve messages
reported when something is wrong with the stack size section.
This patch does it.
Differential revision: https://reviews.llvm.org/D93802
When something is wrong with the GNU hash table header we dump
its context as a raw data.
Currently we have the calculation overflow issue and it is possible to
bypass the validation we have (and crash).
The patch fixes it.
Differential revision: https://reviews.llvm.org/D93760
Currently llvm-readelf might print "OS Specific/Processor Specific/<unknown>"
hint when dumping the ELF file type. The patch teaches llvm-readobj to do the same.
This fixes https://bugs.llvm.org/show_bug.cgi?id=40868
I am removing `Object/elf-unknown-type.test` test because it is not in the right place,
it is outdated and very limited.
The `readobj/ELF/file-types.test` checks the functionality much better.
Differential revision: https://reviews.llvm.org/D93689
I am experimenting with turning backends into loadable modules and in
that scenario, target specific command line arguments won't be available
until after the targets are initialized.
Also, most other tools initialize targets before parsing arguments.
Reviewed By: wlei
Differential Revision: https://reviews.llvm.org/D93348
Currently, `ELFFile<ELFT>::getEntry` does not check an index of
an entry. Because of that the code might read past the end of the symbol
table silently. I've added a test to `llvm-readobj\ELF\relocations.test`
to demonstrate the possible issue. Also, I've added a unit test for
this method.
After this change, `getEntry` stops reporting the section index and
reuses the `getSectionContentsAsArray` method, which already has
all the validation needed. Our related warnings now provide
more and better context sometimes.
Differential revision: https://reviews.llvm.org/D93209
It mimics the GNU readelf where it prints a [VARIANT_PCS] for symbols
with st_other with STO_AARCH64_VARIANT_PCS.
Reviewed By: grimar, MaskRay
Differential Revision: https://reviews.llvm.org/D93044
Part of the <=> changes in C++20 make certain patterns of writing equality
operators ambiguous with themselves (sorry!).
This patch goes through and adjusts all the comparison operators such that
they should work in both C++17 and C++20 modes. It also makes two other small
C++20-specific changes (adding a constructor to a type that cases to be an
aggregate, and adding casts from u8 literals which no longer have type
const char*).
There were four categories of errors that this review fixes.
Here are canonical examples of them, ordered from most to least common:
// 1) Missing const
namespace missing_const {
struct A {
#ifndef FIXED
bool operator==(A const&);
#else
bool operator==(A const&) const;
#endif
};
bool a = A{} == A{}; // error
}
// 2) Type mismatch on CRTP
namespace crtp_mismatch {
template <typename Derived>
struct Base {
#ifndef FIXED
bool operator==(Derived const&) const;
#else
// in one case changed to taking Base const&
friend bool operator==(Derived const&, Derived const&);
#endif
};
struct D : Base<D> { };
bool b = D{} == D{}; // error
}
// 3) iterator/const_iterator with only mixed comparison
namespace iter_const_iter {
template <bool Const>
struct iterator {
using const_iterator = iterator<true>;
iterator();
template <bool B, std::enable_if_t<(Const && !B), int> = 0>
iterator(iterator<B> const&);
#ifndef FIXED
bool operator==(const_iterator const&) const;
#else
friend bool operator==(iterator const&, iterator const&);
#endif
};
bool c = iterator<false>{} == iterator<false>{} // error
|| iterator<false>{} == iterator<true>{}
|| iterator<true>{} == iterator<false>{}
|| iterator<true>{} == iterator<true>{};
}
// 4) Same-type comparison but only have mixed-type operator
namespace ambiguous_choice {
enum Color { Red };
struct C {
C();
C(Color);
operator Color() const;
bool operator==(Color) const;
friend bool operator==(C, C);
};
bool c = C{} == C{}; // error
bool d = C{} == Red;
}
Differential revision: https://reviews.llvm.org/D78938
This change enables pseudo-probe-based sample counts to be consumed by the sample profile loader under the regular `-fprofile-sample-use` switch with minimal adjustments to the existing sample file formats. After the counts are imported, a probe helper, aka, a `PseudoProbeManager` object, is automatically launched to verify the CFG checksum of every function in the current compilation against the corresponding checksum from the profile. Mismatched checksums will cause a function profile to be slipped. A `SampleProfileProber` pass is scheduled before any of the `SampleProfileLoader` instances so that the CFG checksums as well as probe mappings are available during the profile loading time. The `PseudoProbeManager` object is set up right after the profile reading is done. In the future a CFG-based fuzzy matching could be done in `PseudoProbeManager`.
Samples will be applied only to pseudo probe instructions as well as probed callsites once the checksum verification goes through. Those instructions are processed in the same way that regular instructions would be processed in the line-number-based scenario. In other words, a function is processed in a regular way as if it was reduced to just containing pseudo probes (block probes and callsites).
**Adjustment to profile format **
A CFG checksum field is being added to the existing AutoFDO profile formats. So far only the text format and the extended binary format are supported. For the text format, a new line like
```
!CFGChecksum: 12345
```
is added to the end of the body sample lines. For the extended binary profile format, we introduce a metadata section to store the checksum map from function names to their CFG checksums.
Differential Revision: https://reviews.llvm.org/D92347
When a field is optional we can use the `=<none>` syntax in macros.
This patch makes `Value`/`Size` fields of `Symbol` optional
and adds test cases for them.
Differential revision: https://reviews.llvm.org/D93010
This was requested in comments for D93209:
https://reviews.llvm.org/D93209#inline-871192
D93209 fixes an issue with `ELFFile<ELFT>::getEntry`,
after what `getSymbol` starts calling `report_fatal_error` for previously
missed invalid cases.
This patch makes it return `Expected<>` and updates callers.
For few of them I had to add new `report_fatal_error` calls. But I see no
way to avoid it currently. The change would affects too many places, e.g:
`getSymbolBinding` and other methods are used from `ELFSymbolRef`
which is used in too many places across LLVM.
Differential revision: https://reviews.llvm.org/D93297
This is https://bugs.llvm.org/show_bug.cgi?id=45698.
Specification says that
"Loadable segment entries in the program header table appear
in ascending order, sorted on the p_vaddr member."
Our `toMappedAddr()` relies on this condition. This patch
adds a warning when the sorting order of loadable segments is wrong.
In this case we force segments sorting and that allows
`toMappedAddr()` to work as expected.
Differential revision: https://reviews.llvm.org/D92641
The cmake variable LLVM_ENABLE_DIA_SDK was being used here but
was undefined because config.h wasn't included.
Differential Revision: https://reviews.llvm.org/D93309
This is a change suggested in post commit comments for
D93096 (https://reviews.llvm.org/D93096#2451796).
Imagine we want to add a custom OS specific ELF file type.
For that we can update the `ElfObjectFileType` array:
```
static const EnumEntry<unsigned> ElfObjectFileType[] = {
...
{"Core", "CORE (Core file)", ELF::ET_CORE},
{"MyType", "MyType (my description)", 0xfe01},
};
```
The current code then might print:
```
OS Specific: (MyType (my description))
```
Though instead we probably would like to see a nicer output, e.g:
```
Type: MyType (my description)
```
To achieve that we can reorder the code slightly.
It is impossible to add a test I think, because we have no custom values in
the `ElfObjectFileType` array in LLVM.
Differential revision: https://reviews.llvm.org/D93217
Single dash for these options is not recognised.
Changes found by running this on the --help output
and the user guide:
grep -e ' -[a-zA-Z]\{2,\}'
The user guide was updated in https://reviews.llvm.org/D92305
so no change there.
Reviewed By: jhenderson, MaskRay
Differential Revision: https://reviews.llvm.org/D92310
This is related to https://bugs.llvm.org/show_bug.cgi?id=40868.
Currently we don't print `OS Specific`/``Processor Specific`/`<unknown>`
prefixes when dumping the ELF file type. This is not consistent
with GNU readelf. The patch fixes it.
Also, this patch removes the `types.test`, because we already have
`file-types.test`, which tests more cases and this patch revealed that
we have such a duplicate.
Differential revision: https://reviews.llvm.org/D93096
JITLinkDylib represents a target dylib for a JITLink link. By representing this
explicitly we can:
- Enable JITLinkMemoryManagers to manage allocations on a per-dylib basis
(e.g by maintaining a seperate allocation pool for each JITLinkDylib).
- Enable new features and diagnostics that require information about the
target dylib (not implemented in this patch).
When llvm-rc loads an external file, it looks for it relative to
a number of include directories and the current working directory.
If the path is considered absolute, llvm-rc tries to open the
filename as such, and doesn't try to open it relative to other
paths.
On Windows, a path name like "\dir\file" isn't considered absolute
as it lacks the drive name, but by appending it on top of the search
dirs, it's not found.
LLVM's sys::path::append just appends such a path (same with a properly
absolute posix path) after the paths it's supposed to be relative to.
This fix doesn't handle the case if the resource script and the
external file are on a different drive than the current working
directory; to fix that, we'd have to make LLVM's sys::path::append
handle appending fully absolute and partially absolute paths (ones
lacking a drive prefix but containing a root directory), or switch
to C++17's std::filesystem.
Differential Revision: https://reviews.llvm.org/D92558
Current interface of AddressMap assumes that relocations exist.
That is correct for not-linked object file but is not correct
for linked executable. This patch changes interface in such way
that AddressMap could be used not only with not-linked object files:
hasValidRelocationAt()
replaced with:
hasLiveMemoryLocation()
hasLiveAddressRange()
Differential Revision: https://reviews.llvm.org/D87723
llvm::Linker::linkModules() is a static member, so there is no need
to pass reference to llvm::Linker instance to loadArFile() function.
Reviewed By: tra
Differential Revision: https://reviews.llvm.org/D92918
-DENABLE_EXPERIMENTAL_NEW_PASS_MANAGER=on configured LLD and LLVMgold.so
will use the new pass manager by default. Add an option to
use the legacy pass manager. This will also be used by the Clang driver
when -fno-new-pass-manager (D92915) / -fno-experimental-new-pass-manager is set.
Reviewed By: aeubanks, tejohnson
Differential Revision: https://reviews.llvm.org/D92916
This was accidentally reverted by a later change.
LSR currently only runs in the codegen pass manager.
There are a couple issues with LSR and the NPM.
1) Lots of tests assume that LCSSA isn't run before LSR. This breaks a
bunch of tests' expected output. This is fixable with some time put in.
2) LSR doesn't preserve LCSSA. See
llvm/test/Analysis/MemorySSA/update-remove-deadblocks.ll. LSR's use of
SCEVExpander is the only use of SCEVExpander where the PreserveLCSSA option is
off. Turning it on causes some code sinking out of loops to fail due to
SCEVExpander's inability to handle the newly created trivial PHI nodes in the
broken critical edge (I was looking at
llvm/test/Transforms/LoopStrengthReduce/X86/2011-11-29-postincphi.ll).
I also tried simply just calling formLCSSA() at the end of LSR, but the extra
PHI nodes cause regressions in codegen tests.
We'll delay figuring these issues out until later.
This causes the number of check-llvm failures with -enable-new-pm true
by default to go from 60 to 29.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D92796
This changes the `printNotesHelper` to report warnings on its side when
there are errors when dumping notes.
With that we can provide more content when reporting warnings about broken notes.
Differential revision: https://reviews.llvm.org/D92636
It is allowed to have multiple `SHT_SYMTAB_SHNDX` sections, though
we currently don't implement it.
The current implementation assumes that there is a maximum of one SHT_SYMTAB_SHNDX
section and that it is always linked with .symtab section.
This patch drops this limitations.
Differential revision: https://reviews.llvm.org/D92644
This patch adds new PM support for the pass and the pass can be now used
during middle-end transforms. The old pass is remamed to
ScalarizeMaskedMemIntrinLegacyPass.
Reviewed-By: skatkov, aeubanks
Differential Revision: https://reviews.llvm.org/D92743
LSR currently only runs in the codegen pass manager.
There are a couple issues with LSR and the NPM.
1) Lots of tests assume that LCSSA isn't run before LSR. This breaks a
bunch of tests' expected output. This is fixable with some time put in.
2) LSR doesn't preserve LCSSA. See
llvm/test/Analysis/MemorySSA/update-remove-deadblocks.ll. LSR's use of
SCEVExpander is the only use of SCEVExpander where the PreserveLCSSA option is
off. Turning it on causes some code sinking out of loops to fail due to
SCEVExpander's inability to handle the newly created trivial PHI nodes in the
broken critical edge (I was looking at
llvm/test/Transforms/LoopStrengthReduce/X86/2011-11-29-postincphi.ll).
I also tried simply just calling formLCSSA() at the end of LSR, but the extra
PHI nodes cause regressions in codegen tests.
We'll delay figuring these issues out until later.
This causes the number of check-llvm failures with -enable-new-pm true
by default to go from 60 to 29.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D92796
Codegen-specific passes are being ported to the NPM. Rename for better
clarity and note that ported passes that fully work with the NPM should
be removed from these lists.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D92818
Don't know why under Sanitizer build(asan/msan/ubsan), the `std::unordered_map<string, ...>`'s output order is reversed, make the regression test failed.
This change creates a workaround by using sorted container to make the output deterministic.
Reviewed By: hoy, wenlei
Differential Revision: https://reviews.llvm.org/D92816
This stack of changes introduces `llvm-profgen` utility which generates a profile data file from given perf script data files for sample-based PGO. It’s part of(not only) the CSSPGO work. Specifically to support context-sensitive with/without pseudo probe profile, it implements a series of functionalities including perf trace parsing, instruction symbolization, LBR stack/call frame stack unwinding, pseudo probe decoding, etc. Also high throughput is achieved by multiple levels of sample aggregation and compatible format with one stop is generated at the end. Please refer to: https://groups.google.com/g/llvm-dev/c/1p1rdYbL93s for the CSSPGO RFC.
This change supports context-sensitive profile data generation into llvm-profgen. With simultaneous sampling for LBR and call stack, we can identify leaf of LBR sample with calling context from stack sample . During the process of deriving fall through path from LBR entries, we unwind LBR by replaying all the calls and returns (including implicit calls/returns due to inlining) backwards on top of the sampled call stack. Then the state of call stack as we unwind through LBR always represents the calling context of current fall through path.
we have two types of virtual unwinding 1) LBR unwinding and 2) linear range unwinding.
Specifically, for each LBR entry which can be classified into call, return, regular branch, LBR unwinding will replay the operation by pushing, popping or switching leaf frame towards the call stack and since the initial call stack is most recently sampled, the replay should be in anti-execution order, i.e. for the regular case, pop the call stack when LBR is call, push frame on call stack when LBR is return. After each LBR processed, it also needs to align with the next LBR by going through instructions from previous LBR's target to current LBR's source, which we named linear unwinding. As instruction from linear range can come from different function by inlining, linear unwinding will do the range splitting and record counters through the range with same inline context.
With each fall through path from LBR unwinding, we aggregate each sample into counters by the calling context and eventually generate full context sensitive profile (without relying on inlining) to driver compiler's PGO/FDO.
A breakdown of noteworthy changes:
- Added `HybridSample` class as the abstraction perf sample including LBR stack and call stack
* Extended `PerfReader` to implement auto-detect whether input perf script output contains CS profile, then do the parsing. Multiple `HybridSample` are extracted
* Speed up by aggregating `HybridSample` into `AggregatedSamples`
* Added VirtualUnwinder that consumes aggregated `HybridSample` and implements unwinding of calls, returns, and linear path that contains implicit call/return from inlining. Ranges and branches counters are aggregated by the calling context. Here calling context is string type, each context is a pair of function name and callsite location info, the whole context is like `main:1 @ foo:2 @ bar`.
* Added PorfileGenerater that accumulates counters by ranges unfolding or branch target mapping, then generates context-sensitive function profile including function body, inferring callee's head sample, callsite target samples, eventually records into ProfileMap.
* Leveraged LLVM build-in(`SampleProfWriter`) writer to support different serialization format with no stop
- `getCanonicalFnName` for callee name and name from ELF section
- Added regression test for both unwinding and profile generation
Test Plan:
ninja & ninja check-llvm
Reviewed By: hoy, wenlei, wmi
Differential Revision: https://reviews.llvm.org/D89723
Allow sections to be placed into COMDAT groups, in addtion to functions and data
segments.
Also make section symbols unnamed, which allows sections with identical names
(section names are independent of their section symbols, but previously we
gave the symbols the same name as their sections, which results in collisions
when sections are identically-named).
Differential Revision: https://reviews.llvm.org/D92691
This rewrites the logic to get rid of "ELFSymbolRef" API where possible.
This allowed to handle possible errors better, improve warnings reported and add new ones.
Also 'reportWarning' was replaced with 'reportUniqueWarning'
Differential revision: https://reviews.llvm.org/D92545
The file was added in 2007 but the functions have never been implemented.
Having the file can only cause confusion to existing C API (llvm-c/lto.h) users.
LLVMBuild has been removed from the build system. However, three LLVMBuild.txt
files remain in the tree. This patch simply removes them.
llvm/lib/ExecutionEngine/Orc/TargetProcess/LLVMBuild.txt
llvm/tools/llvm-jitlink/llvm-jitlink-executor/LLVMBuild.txt
llvm/tools/llvm-profgen/LLVMBuild.txt
Differential Revision: https://reviews.llvm.org/D92693
Avoid calling getFlags on a non-existent symbol.
The way this is triggered is by calling strip -N on a binary, which sets
the MH_NLIST_OUTOFSYNC_WITH_DYLDINFO header flag. Then, in the
LC_FUNCTION_STARTS command, nm is trying to print the stripped symbols
and needs the proper checks.
This PR adds more register class support in PowerPC,
mark OperandType for imm and memory operands.
Also added more unit tests for SnippetGenerator.
Reviewed By: #powerpc, steven.zhang
Differential Revision: https://reviews.llvm.org/D88044
1. Removed #include "...AliasAnalysis.h" in other headers and modules.
2. Cleaned up includes in AliasAnalysis.h.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D92489
llvm-link should not rely on the '.a' file extension when deciding if input file
should be loaded as archive. Archives may have other extensions (f.e. .lib) or no
extensions at all. This patch changes llvm-link to use llvm::file_magic to check
if input file is an archive.
Reviewed By: RaviNarayanaswamy
Differential Revision: https://reviews.llvm.org/D92376
llvm-link should not rely on the '.a' file extension when deciding if input file
should be loaded as archive. Archives may have other extensions (f.e. .lib) or no
extensions at all. This patch changes llvm-link to use llvm::file_magic to check
if input file is an archive.
Reviewed By: RaviNarayanaswamy
Differential Revision: https://reviews.llvm.org/D92376
Revert "Delete llvm::is_trivially_copyable and CMake variable HAVE_STD_IS_TRIVIALLY_COPYABLE"
This reverts commit 4d4bd40b57.
This reverts commit 557b00e0af.
This implementation of `ELFDumper<ELFT>::printAttributes()` in llvm-readobj has issues:
1) It crashes when the content of the attribute section is empty.
2) It uses `unwrapOrError` and `reportWarning` calls, though
ideally we want to use `reportUniqueWarning`.
3) It contains a TODO about redundant format version check.
`lib/Support/ELFAttributeParser.cpp` uses a hardcoded constant instead of the named constant.
This patch fixes all these issues.
Differential revision: https://reviews.llvm.org/D92318
This:
1) Changes `reportWarning` to `reportUniqueWarning` (no-op here).
2) Adds more context to the message.
3) Merges `broken-dynsym-link.test` into `dyn-symbols.test`, adds more testing.
Differential revision: https://reviews.llvm.org/D92380
Currently when we dump sections, we dump them in the order,
which is specified in the sections header table.
With that the order in the output might not match the order in the file.
This patch starts sorting them by by file offsets when dumping.
When the order in the section header table doesn't match the order
in the file, we should emit the "SectionHeaderTable" key. This patch does it.
Differential revision: https://reviews.llvm.org/D91249
This introduces the overload for `reportUniqueWarning` which allows
to avoid using `createError` in many places.
Differential revision: https://reviews.llvm.org/D92371
This is a part of the plan we had previously to convert all calls to
`reportUniqueWarning` and then rename it to just `reportWarning`.
I was a bit unsure about this particular change at first, because it doesn't add a
new functionality: seems it is impossible to trigger a warning duplication currently.
At the same time I find the idea of the plan mentioned very reasonable.
And with that we will be sure that `DynRegionInfo` can't report duplicate
warnings, what looks like a nice feature for possible refactorings and further tool development.
Differential revision: https://reviews.llvm.org/D92224
This moves the `reportUniqueWarning` method to the base class.
My motivation is the following:
I've experimented with replacing `reportWarning` calls with `reportUniqueWarning`
in ELF dumper. I've found that for example for removing them from `DynRegionInfo` helper
class, it is worth to pass a dumper instance to it (to be able to call dumper()->reportUniqueWarning()).
The problem was that `ELFDumper<ELFT>` is a template class. I had to make `DynRegionInfo` to be templated
and do lots of minor changes everywhere what did not look reasonable/nice.
At the same time I guess one day other dumpers like COFF/MachO/Wasm etc might want to
start using `reportUniqueWarning` API too. Then it looks reasonable to move the logic to the
base class.
With that the problem of passing the dumper instance will be gone.
Differential revision: https://reviews.llvm.org/D92218
This is the #1 of 2 changes that make remarks hotness threshold option
available in more tools. The changes also allow the threshold to sync with
hotness threshold from profile summary with special value 'auto'.
This change modifies the interface of lto::setupLLVMOptimizationRemarks() to
accept remarks hotness threshold. Update all the tools that use it with remarks
hotness threshold options:
* lld: '--opt-remarks-hotness-threshold='
* llvm-lto2: '--pass-remarks-hotness-threshold='
* llvm-lto: '--lto-pass-remarks-hotness-threshold='
* gold plugin: '-plugin-opt=opt-remarks-hotness-threshold='
Differential Revision: https://reviews.llvm.org/D85809
There's a small number of users of this function, they are all updated.
This updates the C API adding a new method LLVMGetTypeByName2 that takes a context and a name.
Differential Revision: https://reviews.llvm.org/D78793
This does the same as `--mcpu=help` but was only
documented in the user guide.
* Added a test for both options.
* Corrected the single dash in `-mcpu=help` text.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D92305
This patch starts emitting the `EShNum` key, when the `e_shnum = 0`
and the section header table exists.
`e_shnum` might be 0, when the the number of entries in the section header
table is larger than or equal to SHN_LORESERVE (0xff00).
In this case the real number of entries
in the section header table is held in the `sh_size`
member of the initial entry in section header table.
Currently, obj2yaml crashes when an object has `e_shoff != 0` and the `sh_size`
member of the initial entry in section header table is `0`.
This patch fixes it.
Differential revision: https://reviews.llvm.org/D92098
The following line asserts when `sh_addralign > MAX_UINT32 && (uint32_t)sh_addralign == 0`:
```
ExpectedOffset = alignTo(ExpectedOffset,
SecHdr.sh_addralign ? SecHdr.sh_addralign : 1);
```
it happens because `sh_addralign` is truncated to 32-bit value, but `alignTo`
doesn't accept `Align == 0`. We should change `1` to `1uLL`.
Differential revision: https://reviews.llvm.org/D92163
This is related to MIPS. Currently we might report an error and exit,
though there is no problem to report a warning and try to continue dumping
an object. The code uses `MipsGOTParser<ELFT> Parser`, which is isolated
in this method.
Differential revision: https://reviews.llvm.org/D92090
This addresses post review comment for D92018.
The warning was:
```
error: loop variable 'Note' is always a copy because the range of type 'iterator_range<llvm::object::ELFFile<llvm::object::ELFType<llvm::support::big, true> >::Elf_Note_Iterator>' (aka 'iterator_range<Elf_Note_Iterator_Impl<ELFType<(llvm::support::endianness)0U, true> > >') does not return a reference [-Werror,-Wrange-loop-analysis]
for (const typename ELFT::Note &Note : Obj.notes(S, Err))
```
Define ConstantData::PoisonValue.
Add support for poison value to LLLexer/LLParser/BitcodeReader/BitcodeWriter.
Add support for poison value to llvm-c interface.
Add support for poison value to OCaml binding.
Add m_Poison in PatternMatch.
Differential Revision: https://reviews.llvm.org/D71126
This commit factors out a WasmTableType definition from WasmTable, as is
the case for WasmGlobal and other data types. Also add support for
extracting the SymbolName for a table from the linking section's symbol
table.
Differential Revision: https://reviews.llvm.org/D91849
This starts using `reportUniqueWarnings` instead of `reportError`
in the code that is responsible for dumping notes.
Differential revision: https://reviews.llvm.org/D92021
`notes_begin()` is used for iterating over notes. This API in some cases might print
section type and index. At the same time during iterating, the `Elf_Note_Iterator`
might omit it as it doesn't have this info.
Because of above we might have the redundant duplication of information in warnings:
(See D92021).
```
warning: '[[FILE]]': unable to read notes from the SHT_NOTE section with index 1: SHT_NOTE section [index 1] has invalid offset (0x40) or size (0xffff0000)
```
This change stops reporting section index/type in Object/ELF.h/notes_begin().
(FTR, this was introduced by me for llvm-readobj in D64470).
Instead we can describe sections/program headers on the caller side.
Differential revision: https://reviews.llvm.org/D92081
Currently we never dump the `sh_offset` key.
Though it sometimes an important information.
To reduce the noise this patch implements the following logic:
1) The "Offset" key for the first section is always emitted.
2) If we can derive the offset for a next section naturally,
then the "Offset" key is omitted.
By "naturally" I mean that section[X] offset is expected to be:
```
offsetOf(section[X]) == alignTo(section[X - 1].sh_offset + section[X - 1].sh_size, section[X].sh_addralign)
```
So, when it has the expected value, we omit it from the output.
Differential revision: https://reviews.llvm.org/D91152
AVR and PPC64 bots reports link errors:
(http://lab.llvm.org:8011/#/builders/112/builds/1522)
(http://lab.llvm.org:8011/#/builders/52/builds/1764)
/tmp/cclOvLx0.s: Assembler messages:
/tmp/cclOvLx0.s:9223: Error: symbol `_ZN4llvm12function_refIFvvEE11callback_fnIUlvE2_EEvl' is already defined
/tmp/cclOvLx0.s:9227: Error: symbol `.L._ZN4llvm12function_refIFvvEE11callback_fnIUlvE2_EEvl' is already defined
/tmp/cclOvLx0.s:10272: Error: symbol `_ZN4llvm12function_refIFvvEE11callback_fnIUlvE2_EEvl' is already defined
/tmp/cclOvLx0.s:10276: Error: symbol `.L._ZN4llvm12function_refIFvvEE11callback_fnIUlvE2_EEvl' is already defined
/tmp/cclOvLx0.s:10285: Error: symbol `_ZN4llvm12function_refIFvvEE11callback_fnIUlvE2_EEvl' is already defined
/tmp/cclOvLx0.s:10289: Error: symbol `.L._ZN4llvm12function_refIFvvEE11callback_fnIUlvE2_EEvl' is already defined
/tmp/ccFJYr6I.s: Assembler messages:
/tmp/ccFJYr6I.s:6284: Error: symbol `_ZN4llvm12function_refIFvvEE11callback_fnIUlvE2_EEvl' is already defined
/tmp/ccFJYr6I.s:7053: Error: symbol `_ZN4llvm12function_refIFvvEE11callback_fnIUlvE2_EEvl' is already defined
/tmp/ccFJYr6I.s:7093: Error: symbol `_ZN4llvm12function_refIFvvEE11callback_fnIUlvE2_EEvl' is already defined
I *guess* the reason might be the default lambda argument. I've removed it.
We have a similar logic for LLVM/GNU styles that can be deduplicated.
This will allow to replace `reportError` calls with `reportUniqueWarning`
calls in a single place.
Differential revision: https://reviews.llvm.org/D92018
This matches the legacy PM's EP_ModuleOptimizerEarly. Some backends use
this extension point and adding the pass somewhere else like
PipelineStartEPCallback doesn't work.
Reviewed By: ychen
Differential Revision: https://reviews.llvm.org/D91804
This:
1) Changes its signature.
2) Refines the name of local variable (`SymTabName`->`LinkedSecName`,
because SHT_GNU_verneed/SHT_GNU_verdef are linked with the string table, not with the symbol table).
3) Stops using the `unwrapOrError` inside.
Differential revision: https://reviews.llvm.org/D91964
This stops using `RelocationRef` API in the `printStackSize` method
and starts using the "regular" API that is used in almost all other places
in ELFDumper.cpp.
This is not only makes the code to be more consistent, but helps to diagnose
issues better, because the `ELFObjectFile` API, which is used
currently to implement stack sized dumping sometimes has a behavior
that just doesn't work well for broken inputs.
E.g see how it gets the `symbol_end` iterator. It will just not work
well for a case when the `sh_size` is broken.
```
template <class ELFT>
basic_symbol_iterator ELFObjectFile<ELFT>::symbol_end() const {
...
DataRefImpl Sym = toDRI(SymTab, SymTab->sh_size / sizeof(Elf_Sym));
return basic_symbol_iterator(SymbolRef(Sym, this));
}
```
Differential revision: https://reviews.llvm.org/D91624
D91867 introduced the `tryGetSectionName` helper.
But we have `getPrintableSectionName` member with the similar
behavior which we can reuse. This patch does it.
Differential revision: https://reviews.llvm.org/D91954
llvm-symbolizer used to use the DIA SDK for symbolization on
Windows; this patch switches to using native symbolization, which was
implemented recently.
Users can still make the symbolizer use DIA by adding the `-dia` flag
in the LLVM_SYMBOLIZER_OPTS environment variable.
Differential Revision: https://reviews.llvm.org/D91814
It is possible to trigger a crash/misbehavior when the st_name field of
the signature symbol goes past the end of the string table.
This patch fixes it.
Differential revision: https://reviews.llvm.org/D91943
It is possible to trigger reading past the EOF by breaking fields like
DT_PLTRELSZ, DT_RELSZ or DT_RELASZ
This patch adds a validation in `DynRegionInfo` helper class.
Differential revision: https://reviews.llvm.org/D91787
All these potential null pointer dereferences are reported by my static analyzer for null smart pointer dereferences, which has a different implementation from `alpha.cplusplus.SmartPtr`.
The checked pointers in this patch are initialized by Target::createXXX functions. When the creator function pointer is not correctly set, a null pointer will be returned, or the creator function may originally return a null pointer.
Some of them may not make sense as they may be checked before entering the function, but I fixed them all in this patch. I submit this fix because 1) similar checks are found in some other places in the LLVM codebase for the same return value of the function; and, 2) some of the pointers are dereferenced before they are checked, which may definitely trigger a null pointer dereference if the return value is nullptr.
Reviewed By: tejohnson, MaskRay, jpienaar
Differential Revision: https://reviews.llvm.org/D91410
This stack of changes introduces `llvm-profgen` utility which generates a profile data file from given perf script data files for sample-based PGO. It’s part of(not only) the CSSPGO work. Specifically to support context-sensitive with/without pseudo probe profile, it implements a series of functionalities including perf trace parsing, instruction symbolization, LBR stack/call frame stack unwinding, pseudo probe decoding, etc. Also high throughput is achieved by multiple levels of sample aggregation and compatible format with one stop is generated at the end. Please refer to: https://groups.google.com/g/llvm-dev/c/1p1rdYbL93s for the CSSPGO RFC.
This change adds the support of instruction symbolization. Given the RVA on an instruction pointer, a full calling context can be printed side-by-side with the disassembly code.
E.g.
```
Disassembly of section .text [0x0, 0x4a]:
<funcA>:
0: mov eax, edi funcA:0
2: mov ecx, dword ptr [rip] funcLeaf:2 @ funcA:1
8: lea edx, [rcx + 3] fib:2 @ funcLeaf:2 @ funcA:1
b: cmp ecx, 3 fib:2 @ funcLeaf:2 @ funcA:1
e: cmovl edx, ecx fib:2 @ funcLeaf:2 @ funcA:1
11: sub eax, edx funcLeaf:2 @ funcA:1
13: ret funcA:2
14: nop word ptr cs:[rax + rax]
1e: nop
<funcLeaf>:
20: mov eax, edi funcLeaf:1
22: mov ecx, dword ptr [rip] funcLeaf:2
28: lea edx, [rcx + 3] fib:2 @ funcLeaf:2
2b: cmp ecx, 3 fib:2 @ funcLeaf:2
2e: cmovl edx, ecx fib:2 @ funcLeaf:2
31: sub eax, edx funcLeaf:2
33: ret funcLeaf:3
34: nop word ptr cs:[rax + rax]
3e: nop
<fib>:
40: lea eax, [rdi + 3] fib:2
43: cmp edi, 3 fib:2
46: cmovl eax, edi fib:2
49: ret fib:8
```
Test Plan:
ninja check-llvm
Reviewed By: wenlei, wmi
Differential Revision: https://reviews.llvm.org/D89715
This stack of changes introduces `llvm-profgen` utility which generates a profile data file from given perf script data files for sample-based PGO. It’s part of(not only) the CSSPGO work. Specifically to support context-sensitive with/without pseudo probe profile, it implements a series of functionalities including perf trace parsing, instruction symbolization, LBR stack/call frame stack unwinding, pseudo probe decoding, etc. Also high throughput is achieved by multiple levels of sample aggregation and compatible format with one stop is generated at the end. Please refer to: https://groups.google.com/g/llvm-dev/c/1p1rdYbL93s for the CSSPGO RFC.
This change enables disassembling the text sections to build various address maps that are potentially used by the virtual unwinder. A switch `--show-disassembly` is being added to print the disassembly code.
Like the llvm-objdump tool, this change leverages existing LLVM components to parse and disassemble ELF binary files. So far X86 is supported.
Test Plan:
ninja check-llvm
Reviewed By: wmi, wenlei
Differential Revision: https://reviews.llvm.org/D89712
This stack of changes introduces `llvm-profgen` utility which generates a profile data file from given perf script data files for sample-based PGO. It’s part of(not only) the CSSPGO work. Specifically to support context-sensitive with/without pseudo probe profile, it implements a series of functionalities including perf trace parsing, instruction symbolization, LBR stack/call frame stack unwinding, pseudo probe decoding, etc. Also high throughput is achieved by multiple levels of sample aggregation and compatible format with one stop is generated at the end. Please refer to: https://groups.google.com/g/llvm-dev/c/1p1rdYbL93s for the CSSPGO RFC.
As a starter, this change sets up an entry point by introducing PerfReader to load profiled binaries and perf traces(including perf events and perf samples). For the event, here it parses the mmap2 events from perf script to build the loader snaps, which is used to retrieve the image load address in the subsequent perf tracing parsing.
As described in llvm-profgen.rst, the tool being built aims to support multiple input perf data (preprocessed by perf script) as well as multiple input binary images. It should also support dynamic reload/unload shared objects by leveraging the loader snaps being built by this change
Reviewed By: wenlei, wmi
Differential Revision: https://reviews.llvm.org/D89707
Our code that dumps groups has 3 noticeable issues:
1) It uses `unwrapOrError` in many places.
2) It doesn't allow reporting unique warnings, because the `getGroups` helper is not
a member of `DumpStyle<ELFT>`.
3) It might just crash. See the comment for `StrTableOrErr->data() + Sym.st_name` line.
In this patch I am starting addressing these points.
For start I've converted one of `unwrapOrError` calls to a unique warning.
Differential revision: https://reviews.llvm.org/D91798
Our `printStackSize` implementation currently uses
API like `RelocationRef`, `object::symbol_iterator`.
It is not ideal as it doesn't allow
to handle possible error conditions properly.
Some time ago I started rewriting it and this NFC patch is
a one more step toward to it. Here I am introducing the
`forEachRelocationDo` helper. With it it is possible to iterate
over all kinds of relocations, what is helpful for improving
the code in `printStackSize` and around.
Differential revision: https://reviews.llvm.org/D91530
This allows to reuse the RelocationResolver from the code
that doesn't want to deal with `RelocationRef` class.
I am going to use it in llvm-readobj. See the description
of D91530 for more details.
Differential revision: https://reviews.llvm.org/D91533
In some places the parser guards against dereferencing `End`, while in
others it relies on the presence of a trailing `'\0'` to elide checks.
Add the remaining guards needed to ensure the parser never attempts to
dereference `End`, making it safe to not require a null-terminated input
buffer.
Update the parser fuzzer harness so that it tests with buffers that are
guaranteed to be non-null-terminated, null-terminated, and 1-terminated,
additionally ensuring the result of the parse is the same in each case.
Some of the regression tests were written by inspection, and some are
cases caught by the fuzzer which required additional fixes in the
parser.
Differential Revision: https://reviews.llvm.org/D84050
This is essentially a clone of the existing fuzzer added in D50839, but
for the whole parser Streamer, and currently only testing for sanitizer
violations.
Differential Revision: https://reviews.llvm.org/D91573
This patch adds support for creating Guard Address-Taken IAT Entry Tables (.giats$y sections) in object files, matching the behavior of MSVC. These contain lists of address-taken imported functions, which are used by the linker to create the final GIATS table.
Additionally, if any DLLs are delay-loaded, the linker must look through the .giats tables and add the respective load thunks of address-taken imports to the GFIDS table, as these are also valid call targets.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D87544
Patch by Elena Kovanova. Thanks Elena!
Problem:
LLVM already has a feature to profile the JIT-compiled code with VTune. This is
done using Intel JIT Profiling API (https://github.com/intel/ittapi). Function
information is captured by VTune as soon as the function is JIT-compiled. We
tried to use the same approach to report the function information generated by
the MCJIT engine – read parsing the debug information for in-memory ELF module
and report it using JIT API. As the results, we figured out that it did not work
properly for the following cases: inline functions, the functions located in
multiple source files, the functions having several bodies (address ranges).
Solution:
To overcome limitations described above, we have introduced new APIs as a part
of Intel ITT APIs to report the entire in-memory ELF module to be further
processed as regular ELF binaries with debug information.
This patch
1. Switches LLVM to open source version of Intel ITT/JIT APIs
(https://github.com/intel/ittapi) to keep it always up to date.
2. Adds support of profiling the code generated by MCJIT engine using Intel
VTune profiler
Another separate patch will get rid of obsolete Intel ITT APIs stuff, having
LLVM already switched to https://github.com/intel/ittapi.
Differential Revision: https://reviews.llvm.org/D86435
No longer rely on an external tool to build the llvm component layout.
Instead, leverage the existing `add_llvm_componentlibrary` cmake function and
introduce `add_llvm_component_group` to accurately describe component behavior.
These function store extra properties in the created targets. These properties
are processed once all components are defined to resolve library dependencies
and produce the header expected by llvm-config.
Differential Revision: https://reviews.llvm.org/D90848
implementation.
This patch aims to improve support for out-of-process JITing using OrcV2. It
introduces two new class templates, OrcRPCTargetProcessControlBase and
OrcRPCTPCServer, which together implement the TargetProcessControl API by
forwarding operations to an execution process via an Orc-RPC Endpoint. These
utilities are used to implement out-of-process JITing from llvm-jitlink to
a new llvm-jitlink-executor tool.
This patch also breaks the OrcJIT library into three parts:
-- OrcTargetProcess: Contains code needed by the JIT execution process.
-- OrcShared: Contains code needed by the JIT execution and compiler
processes
-- OrcJIT: Everything else.
This break-up allows JIT executor processes to link against OrcTargetProcess
and OrcShared only, without having to link in all of OrcJIT. Clients executing
JIT'd code in-process should start linking against OrcTargetProcess as well as
OrcJIT.
In the near future these changes will enable:
-- Removal of the OrcRemoteTargetClient/OrcRemoteTargetServer class templates
which provided similar functionality in OrcV1.
-- Restoration of Chapter 5 of the Building-A-JIT tutorial series, which will
serve as a simple usage example for these APIs.
-- Implementation of lazy, cross-target compilation in lli's -jit-kind=orc-lazy
mode.
Alternative to D74755. sectionWithinSegment() treats an empty section as having
a size of 1. Due to the rule, an empty .tdata will not be attributed to an
empty PT_TLS. (The empty p_align=64 PT_TLS is for Android Bionic's TCB
compatibility (ELF-TLS). See https://reviews.llvm.org/D62055#1507426)
Currently --only-keep-debug will not layout a segment with no section
(layoutSegmentsForOnlyKeepDebug()), thus p_offset of PT_TLS can go past the end
of the file. The strange p_offset can trigger validation errors for subsequent
tools, e.g. llvm-objcopy errors when reading back the separate debug file
(readProgramHeaders()).
This patch places such an empty segment according to its parent segment. This
special cases works for the empty PT_TLS used in Android. For a non-empty
segment, it should have at least one non-empty section and will be handled by
the normal code. Note, p_memsz PT_LOAD is rejected by both Linux and FreeBSD.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D90897
This broke both Firefox and Chromium (PR47905) due to what seems like dllimport
function not being handled correctly.
> This patch adds support for creating Guard Address-Taken IAT Entry Tables (.giats$y sections) in object files, matching the behavior of MSVC. These contain lists of address-taken imported functions, which are used by the linker to create the final GIATS table.
> Additionally, if any DLLs are delay-loaded, the linker must look through the .giats tables and add the respective load thunks of address-taken imports to the GFIDS table, as these are also valid call targets.
>
> Reviewed By: rnk
>
> Differential Revision: https://reviews.llvm.org/D87544
This reverts commit cfd8481da1.
This patch adds a reduction of 'special' globals that lead to further
reductions (e.g. alias or regular globals reduction) being less efficient
because there are special constraints on values referenced in those
special globals. For example, values in @llvm.used and
@llvm.compiler.used need to be named, so replacing all uses of an
alias/global with undef or a different unnamed constant results in
invalid IR.
More details:
https://llvm.org/docs/LangRef.html#intrinsic-global-variables
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D90302
Imagine we have a YAML declaration of few sections: `foo1`, `<unnamed 2>`, `foo3`, `foo4`.
To put them into segment we can do (1*):
```
Sections:
- Section: foo1
- Section: foo4
```
or we can use (2*):
```
Sections:
- Section: foo1
- Section: foo3
- Section: foo4
```
or (3*) :
```
Sections:
- Section: foo1
## "(index 2)" here is a name that we automatically created for a unnamed section.
- Section: (index 2)
- Section: foo3
- Section: foo4
```
It looks really confusing that we don't have to list all of sections.
At first I've tried to make this rule stricter and report an error when there is a gap
(i.e. when a section is included into segment, but not listed explicitly).
This did not work perfect, because such approach conflicts with unnamed sections/fills (see (3*)).
This patch drops "Sections" key and introduces 2 keys instead: `FirstSec` and `LastSec`.
Both are optional.
Differential revision: https://reviews.llvm.org/D90458
This is recommit for D90903 with fixes for BB:
1) Used std::move<> when returning Expected<> (http://lab.llvm.org:8011/#/builders/112/builds/913)
2) Fixed the name of temporarily file in the file-headers.test (http://lab.llvm.org:8011/#/builders/36/builds/1269)
(a local old temporarily file was used before)
For creating `ELFObjectFile` instances we have the factory method
`ELFObjectFile<ELFT>::create(MemoryBufferRef Object)`.
The problem of this method is that it scans the section header to locate some sections.
When a file is truncated or has broken fields in the ELF header, this approach does
not allow us to create the `ELFObjectFile` and dump the ELF header.
This is https://bugs.llvm.org/show_bug.cgi?id=40804
This patch suggests a solution - it allows to delay scaning sections in the
`ELFObjectFile<ELFT>::create`. It now allows user code to call an object
initialization (`initContent()`) later. With that it is possible,
for example, for dumpers just to dump the file header and exit.
By default initialization is still performed as before, what helps to keep
the logic of existent callers untouched.
I've experimented with different approaches when worked on this patch.
I think this approach is better than doing initialization of sections (i.e. scan of them)
on demand, because normally users of `ELFObjectFile` API expect to work with a valid object.
In most cases when a section header table can't be read (because of an error), we don't
have to continue to work with object. So we probably don't need to implement a more complex API.
Differential revision: https://reviews.llvm.org/D90903
For creating `ELFObjectFile` instances we have the factory method
`ELFObjectFile<ELFT>::create(MemoryBufferRef Object)`.
The problem of this method is that it scans the section header to locate some sections.
When a file is truncated or has broken fields in the ELF header, this approach does
not allow us to create the `ELFObjectFile` and dump the ELF header.
This is https://bugs.llvm.org/show_bug.cgi?id=40804
This patch suggests a solution - it allows to delay scaning sections in the
`ELFObjectFile<ELFT>::create`. It now allows user code to call an object
initialization (`initContent()`) later. With that it is possible,
for example, for dumpers just to dump the file header and exit.
By default initialization is still performed as before, what helps to keep
the logic of existent callers untouched.
I've experimented with different approaches when worked on this patch.
I think this approach is better than doing initialization of sections (i.e. scan of them)
on demand, because normally users of `ELFObjectFile` API expect to work with a valid object.
In most cases when a section header table can't be read (because of an error), we don't
have to continue to work with object. So we probably don't need to implement a more complex API.
Differential revision: https://reviews.llvm.org/D90903
While generating yamls for my tests I noticed that the new debug_abbrev format (with multiple table support) was incorrectly assigning id's to the table because it was generating one per abbrev entry in the table. For instance, the first table would get id 4 when 5 abbrev entries existed in the table. By itself this is not a problem but the corresponding debug_info sections were still referencing id 0. This was introduced here: https://reviews.llvm.org/D83116.
Maybe a better fix is to actually correctly calculate the table id when emitting debug info? From a quick glance it seems to me the ID is just being calculated as the distance between the first DWARFAbbreviationDeclarationSet and the one the debug info entry points to, which means it's just its index and not the actual table id that was generated when emitting the debug_abbrev tables. With my fix I guess this is fine but on the diff that introduced this Pavel mentioned that he would like to have some sort of unique id between them but not necessarily +1 increasing, but for that to work we need to actually find the table ID, I guess by going directly to Y.DebugAbbrev but to honest I have no idea how to link the DWARFAbbreviationDeclarationSet and the Y.DebugAbbrev, so I just did this simple fix.
I also realized there's barely any tests for MachO so it might useful to invest on that if the tool is being reworked on.
Reviewed By: Higuoxing, jhenderson
Differential Revision: https://reviews.llvm.org/D87179
This diff fixes missing fields initialization (Size, VMSize).
Previously this resulted in broken binaries when multiple sections
were added in one tool's invocatation.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D90690
Some binaries can contain regular sections with zero offset and zero size.
This diff makes llvm-objcopy's handling of such sections consistent with
cctools's strip (which doesn't modify them),
previously the tool would allocate file space for them.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D90796
YAML support allows us to better test the feature in the subsequent patches. The implementation is quite similar to the .stack_sizes section.
Reviewed By: jhenderson, grimar
Differential Revision: https://reviews.llvm.org/D88717
Allow single-quoted strings and double-quoted character values, as well as doubled-quote escaping.
Reviewed By: thakis
Differential Revision: https://reviews.llvm.org/D89731
This matches behavior GNU objcopy and can simplify clang-offload-bundler
(which currently works around the issue by invoking llvm-objcopy twice).
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D90438
Kazu Hirata