Update comment for isOutOfScope and add a testcase for uniform value being used
out of scope.
Differential Revision: https://reviews.llvm.org/D23073
llvm-svn: 277515
This patch enables the vectorizer to generate both scalar and vector versions
of an integer induction variable for a given loop. Previously, we only
generated a scalar induction variable if we knew all its users were going to be
scalar. Otherwise, we generated a vector induction variable. In the case of a
loop with both scalar and vector users of the induction variable, we would
generate the vector induction variable and extract scalar values from it for
the scalar users. With this patch, we now generate both versions of the
induction variable when there are both scalar and vector users and select which
version to use based on whether the user is scalar or vector.
Differential Revision: https://reviews.llvm.org/D22869
llvm-svn: 277474
This patch refactors the logic in collectLoopUniforms and
collectValuesToIgnore, untangling the concepts of "uniform" and "scalar". It
adds isScalarAfterVectorization along side isUniformAfterVectorization to
distinguish the two. Known scalar values include those that are uniform,
getelementptr instructions that won't be vectorized, and induction variables
and induction variable update instructions whose users are all known to be
scalar.
This patch includes the following functional changes:
- In collectLoopUniforms, we mark uniform the pointer operands of interleaved
accesses. Although non-consecutive, these pointers are treated like
consecutive pointers during vectorization.
- In collectValuesToIgnore, we insert a value into VecValuesToIgnore if it
isScalarAfterVectorization rather than isUniformAfterVectorization. This
differs from the previous functionaly in that we now add getelementptr
instructions that will not be vectorized into VecValuesToIgnore.
This patch also removes the ValuesNotWidened set used for induction variable
scalarization since, after the above changes, it is now equivalent to
isScalarAfterVectorization.
Differential Revision: https://reviews.llvm.org/D22867
llvm-svn: 277460
Summary:
TargetBaseAlign is no longer required since LSV checks if target allows misaligned accesses.
A constant defining a base alignment is still needed for stack accesses where alignment can be adjusted.
Reviewers: llvm-commits, jlebar
Subscribers: mzolotukhin, arsenm
Differential Revision: https://reviews.llvm.org/D22936
llvm-svn: 277038
Summary:
Given the crash in D22878, this patch converts the load/store vectorizer
to use explicit Instruction*s wherever possible. This is an overall
simplification and should be an improvement in safety, as we have fewer
naked cast<>s, and now where we use Value*, we really mean something
different from Instruction*.
This patch also gets rid of some cast<>s around Value*s returned by
Builder. Given that Builder constant-folds everything, we can't assume
much about what we get out of it.
One downside of this patch is that we have to copy our chain before
calling propagateMetadata. But I don't think this is a big deal, as our
chains are very small (usually 2 or 4 elems).
Reviewers: asbirlea
Subscribers: mzolotukhin, llvm-commits, arsenm
Differential Revision: https://reviews.llvm.org/D22887
llvm-svn: 276938
Summary:
When we ask the builder to create a bitcast on a constant, we get back a
constant, not an instruction.
Reviewers: asbirlea
Subscribers: jholewinski, mzolotukhin, llvm-commits, arsenm
Differential Revision: https://reviews.llvm.org/D22878
llvm-svn: 276922
Allowed loop vectorization with secondary FP IVs. Like this:
float *A;
float x = init;
for (int i=0; i < N; ++i) {
A[i] = x;
x -= fp_inc;
}
The auto-vectorization is possible when the induction binary operator is "fast" or the function has "unsafe" attribute.
Differential Revision: https://reviews.llvm.org/D21330
llvm-svn: 276554
When vectorizing a tree rooted at a store bundle, we currently try to sort the
stores before building the tree, so that the stores can be vectorized. For other
trees, the order of the root bundle - which determines the order of all other
bundles - is arbitrary. That is bad, since if a leaf bundle of consecutive loads
happens to appear in the wrong order, we will not vectorize it.
This is partially mitigated when the root is a binary operator, by trying to
build a "reversed" tree when that's considered profitable. This patch extends the
workaround we have for binops to trees rooted in a horizontal reduction.
This fixes PR28474.
Differential Revision: https://reviews.llvm.org/D22554
llvm-svn: 276477
This patch moves the update instruction for vectorized integer induction phi
nodes to the end of the latch block. This ensures consistent placement of all
induction updates across all the kinds of int inductions we create (scalar,
splat vector, or vector phi).
Differential Revision: https://reviews.llvm.org/D22416
llvm-svn: 276339
The earlier change added hotness attribute to missed-optimization
remarks. This follows up with the analysis remarks (the ones explaining
the reason for the missed optimization).
llvm-svn: 276192
Summary:
Previously we wouldn't move loads/stores across instructions that had
side-effects, where that was defined as may-write or may-throw. But
this is not sufficiently restrictive: Stores can't safely be moved
across instructions that may load.
This patch also adds a DEBUG check that all instructions in our chain
are either loads or stores.
Reviewers: asbirlea
Subscribers: llvm-commits, jholewinski, arsenm, mzolotukhin
Differential Revision: https://reviews.llvm.org/D22547
llvm-svn: 276171
Summary:
Previously if we had a chain that contained a side-effecting
instruction, we wouldn't vectorize it at all. Now we'll vectorize
everything that comes before the side-effecting instruction.
Reviewers: asbirlea
Subscribers: arsenm, jholewinski, llvm-commits, mzolotukhin
Differential Revision: https://reviews.llvm.org/D22536
llvm-svn: 276170
Summary:
getVectorizablePrefix previously didn't work properly in the face of
aliasing loads/stores. It unwittingly assumed that the loads/stores
appeared in the BB in address order. If they didn't, it would do the
wrong thing.
Reviewers: asbirlea, tstellarAMD
Subscribers: arsenm, llvm-commits, mzolotukhin
Differential Revision: https://reviews.llvm.org/D22535
llvm-svn: 276072
Summary:
Previously, the insertion point for stores was the last instruction in
Chain *before calling getVectorizablePrefixEndIdx*. Thus if
getVectorizablePrefixEndIdx didn't return Chain.size(), we still would
insert at the last instruction in Chain.
This patch changes our internal API a bit in an attempt to make it less
prone to this sort of error. As a result, we end up recalculating the
Chain's boundary instructions, but I think worrying about the speed hit
of this is a premature optimization right now.
Reviewers: asbirlea, tstellarAMD
Subscribers: mzolotukhin, arsenm, llvm-commits
Differential Revision: https://reviews.llvm.org/D22534
llvm-svn: 276056
Summary:
The DEBUG message was hard to read because two Values were being printed
on the same line with only the delimiter "aliases". This change makes
us print each Value on its own line.
Reviewers: asbirlea
Subscribers: llvm-commits, arsenm, mzolotukhin
Differential Revision: https://reviews.llvm.org/D22533
llvm-svn: 276055
For instructions in uniform set, they will not have vector versions so
add them to VecValuesToIgnore.
For induction vars, those only used in uniform instructions or consecutive
ptrs instructions have already been added to VecValuesToIgnore above. For
those induction vars which are only used in uniform instructions or
non-consecutive/non-gather scatter ptr instructions, the related phi and
update will also be added into VecValuesToIgnore set.
The change will make the vector RegUsages estimation less conservative.
Differential Revision: https://reviews.llvm.org/D20474
The recommit fixed the testcase global_alias.ll.
llvm-svn: 275936
For instructions in uniform set, they will not have vector versions so
add them to VecValuesToIgnore.
For induction vars, those only used in uniform instructions or consecutive
ptrs instructions have already been added to VecValuesToIgnore above. For
those induction vars which are only used in uniform instructions or
non-consecutive/non-gather scatter ptr instructions, the related phi and
update will also be added into VecValuesToIgnore set.
The change will make the vector RegUsages estimation less conservative.
Differential Revision: https://reviews.llvm.org/D20474
llvm-svn: 275912
This patch swaps A and B in the interleaved access analysis and clarifies
related comments. The algorithm is more intuitive if we let access A precede
access B in program order rather than the reverse. This change was requested in
the review of D19984.
llvm-svn: 275567
We now collect all accesses with a constant stride, not just the ones with a
stride greater than one. This change was requested in the review of D19984.
llvm-svn: 275473
This patch allows the formation of interleaved access groups in loops
containing predicated blocks. However, the predicated accesses are prevented
from forming groups.
Differential Revision: https://reviews.llvm.org/D19694
llvm-svn: 275471
This patch prevents increases in the number of instructions, pre-instcombine,
due to induction variable scalarization. An increase in instructions can lead
to an increase in the compile-time required to simplify the induction
variables. We now maintain a new map for scalarized induction variables to
prevent us from converting between the scalar and vector forms.
This patch should resolve compile-time regressions seen after r274627.
llvm-svn: 275419
Summary:
LSV used to abort vectorizing a chain for interleaved load/store accesses that alias.
Allow a valid prefix of the chain to be vectorized, mark just the prefix and retry vectorizing the remaining chain.
Reviewers: llvm-commits, jlebar, arsenm
Subscribers: mzolotukhin
Differential Revision: http://reviews.llvm.org/D22119
llvm-svn: 275317
The LCSSA pass itself will not generate several redundant PHI nodes in a single
exit block. However, such redundant PHI nodes don't violate LCSSA form, and may
be introduced by passes that preserve LCSSA, and/or preserved by the LCSSA pass
itself. So, assuming a single PHI node per exit block is not safe.
llvm-svn: 275217
Summary:
Aiming to correct the ordering of loads/stores. This patch changes the
insert point for loads to the position of the first load.
It updates the ordering method for loads to insert before, rather than after.
Before this patch the following sequence:
"load a[1], store a[1], store a[0], load a[2]"
Would incorrectly vectorize to "store a[0,1], load a[1,2]".
The correctness check was assuming the insertion point for loads is at
the position of the first load, when in practice it was at the last
load. An alternative fix would have been to invert the correctness check.
The current fix changes insert position but also requires reordering of
instructions before the vectorized load.
Updated testcases to reflect the changes.
Reviewers: tstellarAMD, llvm-commits, jlebar, arsenm
Subscribers: mzolotukhin
Differential Revision: http://reviews.llvm.org/D22071
llvm-svn: 275117
We currently always vectorize induction variables. However, if an induction
variable is only used for counting loop iterations or computing addresses with
getelementptr instructions, we don't need to do this. Vectorizing these trivial
induction variables can create vector code that is difficult to simplify later
on. This is especially true when the unroll factor is greater than one, and we
create vector arithmetic when computing step vectors. With this patch, we check
if an induction variable is only used for counting iterations or computing
addresses, and if so, scalarize the arithmetic when computing step vectors
instead. This allows for greater simplification.
This patch addresses the suboptimal pointer arithmetic sequence seen in
PR27881.
Reference: https://llvm.org/bugs/show_bug.cgi?id=27881
Differential Revision: http://reviews.llvm.org/D21620
llvm-svn: 274627
This patch also removes the SCEV variants of getStepVector() since they have no
uses after the refactoring.
Differential Revision: http://reviews.llvm.org/D21903
llvm-svn: 274558
Summary:
GetBoundryInstruction returns the last instruction as the instruction which follows or end(). Otherwise the last instruction in the boundry set is not being tested by isVectorizable().
Partially solve reordering of instructions. More extensive solution to follow.
Reviewers: tstellarAMD, llvm-commits, jlebar
Subscribers: escha, arsenm, mzolotukhin
Differential Revision: http://reviews.llvm.org/D21934
llvm-svn: 274389
integer.
Fixes issues on some architectures where we use arithmetic ops to build
vectors, which can cause bad things to happen for loads/stores of mixed
types.
Patch by Fiona Glaser
llvm-svn: 274307
Except the seed uniform instructions (conditional branch and consecutive ptr
instructions), dependencies to be added into uniform set should only be used
by existing uniform instructions or intructions outside of current loop.
Differential Revision: http://reviews.llvm.org/D21755
llvm-svn: 274262
For the new hotness attribute, the API will take the pass rather than
the pass name so we can no longer play the trick of AlwaysPrint being a
special pass name. This adds a getter to help the transition.
There is also a corresponding clang patch.
llvm-svn: 274100
It did not handle correctly cases without GEP.
The following loop wasn't vectorized:
for (int i=0; i<len; i++)
*to++ = *from++;
I use getPtrStride() to find Stride for memory access and return 0 is the Stride is not 1 or -1.
Re-commit rL273257 - revision: http://reviews.llvm.org/D20789
llvm-svn: 273864
The interleaved access analysis currently assumes that the inserted run-time
pointer aliasing checks ensure the absence of dependences that would prevent
its instruction reordering. However, this is not the case.
Issues can arise from how code generation is performed for interleaved groups.
For a load group, all loads in the group are essentially moved to the location
of the first load in program order, and for a store group, all stores in the
group are moved to the location of the last store. For groups having members
involved in a dependence relation with any other instruction in the loop, this
reordering can violate the dependence.
This patch teaches the interleaved access analysis how to avoid breaking such
dependences, and should fix PR27626.
An assumption of the original analysis was that the accesses had been collected
in "program order". The analysis was then simplified by visiting the accesses
bottom-up. However, this ordering was never guaranteed for anything other than
single basic block loops. Thus, this patch also enforces the desired ordering.
Reference: https://llvm.org/bugs/show_bug.cgi?id=27626
Differential Revision: http://reviews.llvm.org/D19984
llvm-svn: 273687
It did not handle correctly cases without GEP.
The following loop wasn't vectorized:
for (int i=0; i<len; i++)
*to++ = *from++;
I use getPtrStride() to find Stride for memory access and return 0 is the Stride is not 1 or -1.
Differential revision: http://reviews.llvm.org/D20789
llvm-svn: 273257
This is a functional change for LLE and LDist. The other clients (LV,
LVerLICM) already had this explicitly enabled.
The temporary boolean parameter to LAA is removed that allowed turning
off speculation of symbolic strides. This makes LAA's caching interface
LAA::getInfo only take the loop as the parameter. This makes the
interface more friendly to the new Pass Manager.
The flag -enable-mem-access-versioning is moved from LV to a LAA which
now allows turning off speculation globally.
llvm-svn: 273064
This is still NFCI, so the list of clients that allow symbolic stride
speculation does not change (yes: LV and LoopVersioningLICM, no: LLE,
LDist). However since the symbolic strides are now managed by LAA
rather than passed by client a new bool parameter is used to enable
symbolic stride speculation.
The existing test Transforms/LoopVectorize/version-mem-access.ll checks
that stride speculation is performed for LV.
The previously added test Transforms/LoopLoadElim/symbolic-stride.ll
ensures that no speculation is performed for LLE.
The next patch will change the functionality and turn on symbolic stride
speculation in all of LAA's clients and remove the bool parameter.
llvm-svn: 272970
Turns out SymbolicStrides is actually used in canVectorizeWithIfConvert
before it gets set up in canVectorizeMemory.
This works fine as long as SymbolicStrides resides in LV since we just
have an empty map. Based on this the conclusion is made that there are
no symbolic strides which is conservatively correct.
However once SymbolicStrides becomes part of LAI, LAI is nullptr at this
point so we need to differentiate the uninitialized state by returning a
nullptr for SymbolicStrides.
llvm-svn: 272966
LoopVectorizationLegality holds a constant reference to LAI, so this
will have to be const as well.
Also added missed function comment.
llvm-svn: 272851
The error on clang-x86-win2008-selfhost is:
C:\buildbot\slave-config\clang-x86-win2008-selfhost\llvm\lib\Transforms\Vectorize\SLPVectorizer.cpp(955) : error C2248: 'llvm::slpvectorizer::BoUpSLP::ScheduleData' : cannot access private struct declared in class 'llvm::slpvectorizer::BoUpSLP'
C:\buildbot\slave-config\clang-x86-win2008-selfhost\llvm\lib\Transforms\Vectorize\SLPVectorizer.cpp(608) : see declaration of 'llvm::slpvectorizer::BoUpSLP::ScheduleData'
C:\buildbot\slave-config\clang-x86-win2008-selfhost\llvm\lib\Transforms\Vectorize\SLPVectorizer.cpp(337) : see declaration of 'llvm::slpvectorizer::BoUpSLP'
I reproduced this locally with both MSVC 2013 and MSVC 2015.
llvm-svn: 272772
This wasn't failing for me with clang as the compiler. I think GCC may
disagree with clang about whether a friend declaration introduces a
declaration in the enclosing namespace (or something).
Example error:
/home/uweigand/sandbox/buildbot/clang-s390x-linux/llvm/lib/Transforms/Vectorize/SLPVectorizer.cpp:950:77: error: ‘llvm::raw_ostream& llvm::slpvectorizer::operator<<(llvm::raw_ostream&, const llvm::slpvectorizer::BoUpSLP::ScheduleData&)’ should have been declared inside ‘llvm::slpvectorizer’
const BoUpSLP::ScheduleData &SD) {
^
llvm-svn: 272767
This uses the "runImpl" approach to share code with the old PM.
Porting to the new PM meant abandoning the anonymous namespace enclosing
most of SLPVectorizer.cpp which is a bit of a bummer (but not a big deal
compared to having to pull the pass class into a header which the new PM
requires since it calls the constructor directly).
llvm-svn: 272766
r272715 broke libcxx because it did not correctly handle cases where the
last iteration of one IV is the second-to-last iteration of another.
Original commit message:
Vectorizing loops with "escaping" IVs has been disabled since r190790, due to
PR17179. This re-enables it, with support for external use of both
"post-increment" (last iteration) and "pre-increment" (second-to-last iteration)
IVs.
llvm-svn: 272742
Vectorizing loops with "escaping" IVs has been disabled since r190790, due to
PR17179. This re-enables it, with support for external use of both
"post-increment" (last iteration) and "pre-increment" (second-to-last iteration)
IVs.
Differential Revision: http://reviews.llvm.org/D21048
llvm-svn: 272715
Previously, we materialized secondary vector IVs from the primary scalar IV,
by offseting the primary to match the correct start value, and then broadcasting
it - inside the loop body. Instead, we can use a real vector IV, like we do for
the primary.
This enables using vector IVs for secondary integer IVs whose type matches the
type of the primary.
Differential Revision: http://reviews.llvm.org/D20932
llvm-svn: 272283
Summary:
This fixes PR27617.
Bug description: The SLPVectorizer asserts on encountering GEPs with different index types, such as i8 and i64.
The patch includes a simple relaxation of the assert to allow constants being of different types, along with a regression test that will provoke the unrelaxed assert.
Reviewers: nadav, mzolotukhin
Subscribers: JesperAntonsson, llvm-commits, mzolotukhin
Differential Revision: http://reviews.llvm.org/D20685
Patch by Jesper Antonsson!
llvm-svn: 272206
Previously, whenever we needed a vector IV, we would create it on the fly,
by splatting the scalar IV and adding a step vector. Instead, we can create a
real vector IV. This tends to save a couple of instructions per iteration.
This only changes the behavior for the most basic case - integer primary
IVs with a constant step.
Differential Revision: http://reviews.llvm.org/D20315
llvm-svn: 271410
This patch fixes bug https://llvm.org/bugs/show_bug.cgi?id=27897.
When query memory access cost, current SLP always passes in alignment value of 1 (unaligned), so it gets a very high cost of scalar memory access, and wrongly vectorize memory loads in the test case.
It can be fixed by simply giving correct alignment.
llvm-svn: 271333
In truncateToMinimalBitwidths() we were RAUW'ing an instruction then erasing it. However, that intruction could be cached in the map we're iterating over. The first check is "I->use_empty()" which in most cases would return true, as the (deleted) object was RAUW'd first so would have zero use count. However in some cases the object could have been polluted or written over and this wouldn't be the case. Also it makes valgrind, asan and traditionalists who don't like their compiler to crash sad.
No testcase as there are no externally visible symptoms apart from a crash if the stars align.
Fixes PR26509.
llvm-svn: 269908
The selection of the vectorization factor currently doesn't consider
interleaved accesses. The vectorization factor is based on the maximum safe
dependence distance computed by LAA. However, for loops with interleaved
groups, we should instead base the vectorization factor on the maximum safe
dependence distance divided by the maximum interleave factor of all the
interleaved groups. Interleaved accesses not in a group will be scalarized.
Differential Revision: http://reviews.llvm.org/D20241
llvm-svn: 269659
Split FCMP//ICMP/SEL from the basic arithmetic cost functions. They were not sharing any notable code path (just the return) and were repeatedly testing the opcode.
llvm-svn: 269348
LoopVectorBody was changed from a single pointer to a SmallVector when
store predication was introduced in r200270. Since r247139, store predication
no longer splits the vector loop body in-place, so we can go back to having
a single LoopVectorBody block.
This reverts the no-longer-needed changes from r200270.
llvm-svn: 269321
Allow vectorization when the step is a loop-invariant variable.
This is the loop example that is getting vectorized after the patch:
int int_inc;
int bar(int init, int *restrict A, int N) {
int x = init;
for (int i=0;i<N;i++){
A[i] = x;
x += int_inc;
}
return x;
}
"x" is an induction variable with *loop-invariant* step.
But it is not a primary induction. Primary induction variable with non-constant step is not handled yet.
Differential Revision: http://reviews.llvm.org/D19258
llvm-svn: 269023
Summary:
Some PHIs can have expressions that are not AddRecExprs due to the presence
of sext/zext instructions. In order to prevent the Loop Vectorizer from
bailing out when encountering these PHIs, we now coerce the SCEV
expressions to AddRecExprs using SCEV predicates (when possible).
We only do this when the alternative would be to not vectorize.
Reviewers: mzolotukhin, anemet
Subscribers: mssimpso, sanjoy, mzolotukhin, llvm-commits
Differential Revision: http://reviews.llvm.org/D17153
llvm-svn: 268633
We need to keep loop hints from the original loop on the new vector loop.
Failure to do this meant that, for example:
void foo(int *b) {
#pragma clang loop unroll(disable)
for (int i = 0; i < 16; ++i)
b[i] = 1;
}
this loop would be unrolled. Why? Because we'd vectorize it, thus dropping the
hints that unrolling should be disabled, and then we'd unroll it.
llvm-svn: 267970
We previously disallowed interleaved load groups that may cause us to
speculatively access memory out-of-bounds (r261331). We did this by ensuring
each load group had an access corresponding to the first and last member.
Instead of bailing out for these interleaved groups, this patch enables us to
peel off the last vector iteration, ensuring that we execute at least one
iteration of the scalar remainder loop. This solution was proposed in the
review of the previous patch.
Differential Revision: http://reviews.llvm.org/D19487
llvm-svn: 267751
This is the first of two commits for extending SLP Vectorizer to deal with aggregates.
This commit merely refactors existing logic.
http://reviews.llvm.org/D14185
llvm-svn: 267748
This change adds a new hook for estimating the cost of vector extracts followed
by zero- and sign-extensions. The motivating example for this change is the
SMOV and UMOV instructions on AArch64. These instructions move data from vector
to general purpose registers while performing the corresponding extension
(sign-extend for SMOV and zero-extend for UMOV) at the same time. For these
operations, TargetTransformInfo can assume the extensions are free and only
report the cost of the vector extract. The SLP vectorizer has been updated to
make use of the new hook.
Differential Revision: http://reviews.llvm.org/D18523
llvm-svn: 267725
I really thought we were doing this already, but we were not. Given this input:
void Test(int *res, int *c, int *d, int *p) {
for (int i = 0; i < 16; i++)
res[i] = (p[i] == 0) ? res[i] : res[i] + d[i];
}
we did not vectorize the loop. Even with "assume_safety" the check that we
don't if-convert conditionally-executed loads (to protect against
data-dependent deferenceability) was not elided.
One subtlety: As implemented, it will still prefer to use a masked-load
instrinsic (given target support) over the speculated load. The choice here
seems architecture specific; the best option depends on how expensive the
masked load is compared to a regular load. Ideally, using the masked load still
reduces unnecessary memory traffic, and so should be preferred. If we'd rather
do it the other way, flipping the order of the checks is easy.
The LangRef is updated to make explicit that llvm.mem.parallel_loop_access also
implies that if conversion is okay.
Differential Revision: http://reviews.llvm.org/D19512
llvm-svn: 267514
The original commit was reverted because of a buildbot problem with LazyCallGraph::SCC handling (not related to the OptBisect handling).
Differential Revision: http://reviews.llvm.org/D19172
llvm-svn: 267231
This patch implements a optimization bisect feature, which will allow optimizations to be selectively disabled at compile time in order to track down test failures that are caused by incorrect optimizations.
The bisection is enabled using a new command line option (-opt-bisect-limit). Individual passes that may be skipped call the OptBisect object (via an LLVMContext) to see if they should be skipped based on the bisect limit. A finer level of control (disabling individual transformations) can be managed through an addition OptBisect method, but this is not yet used.
The skip checking in this implementation is based on (and replaces) the skipOptnoneFunction check. Where that check was being called, a new call has been inserted in its place which checks the bisect limit and the optnone attribute. A new function call has been added for module and SCC passes that behaves in a similar way.
Differential Revision: http://reviews.llvm.org/D19172
llvm-svn: 267022
The functionality contained within getIntrinsicIDForCall is two-fold: it
checks if a CallInst's callee is a vectorizable intrinsic. If it isn't
an intrinsic, it attempts to map the call's target to a suitable
intrinsic.
Move the mapping functionality into getIntrinsicForCallSite and rename
getIntrinsicIDForCall to getVectorIntrinsicIDForCall while
reimplementing it in terms of getIntrinsicForCallSite.
llvm-svn: 266801
Removed some unused headers, replaced some headers with forward class declarations.
Found using simple scripts like this one:
clear && ack --cpp -l '#include "llvm/ADT/IndexedMap.h"' | xargs grep -L 'IndexedMap[<]' | xargs grep -n --color=auto 'IndexedMap'
Patch by Eugene Kosov <claprix@yandex.ru>
Differential Revision: http://reviews.llvm.org/D19219
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 266595
Some SIMD implementations are not IEEE-754 compliant, for example ARM's NEON.
This patch teaches the loop vectorizer to only allow transformations of loops
that either contain no floating-point operations or have enough allowance
flags supporting lack of precision (ex. -ffast-math, Darwin).
For that, the target description now has a method which tells us if the
vectorizer is allowed to handle FP math without falling into unsafe
representations, plus a check on every FP instruction in the candidate loop
to check for the safety flags.
This commit makes LLVM behave like GCC with respect to ARM NEON support, but
it stops short of fixing the underlying problem: sub-normals. Neither GCC
nor LLVM have a flag for allowing sub-normal operations. Before this patch,
GCC only allows it using unsafe-math flags and LLVM allows it by default with
no way to turn it off (short of not using NEON at all).
As a first step, we push this change to make it safe and in sync with GCC.
The second step is to discuss a new sub-normal's flag on both communitues
and come up with a common solution. The third step is to improve the FastMath
flags in LLVM to encode sub-normals and use those flags to restrict NEON FP.
Fixes PR16275.
llvm-svn: 266363
The behavior of {MIN,MAX}NAN differs from that of {MIN,MAX}NUM when only
one of the inputs is NaN: -NUM will return the non-NaN argument while
-NAN would return NaN.
It is desirable to lower to @llvm.{min,max}num to -NAN if they don't
have a native instruction for -NUM. Notably, ARMv7 NEON's vmin has the
-NAN semantics.
N.B. Of course, it is only safe to do this if the intrinsic call is
marked nnan.
llvm-svn: 266279
Vectorization cost of uniform load wasn't correctly calculated.
As a result, a simple loop that loads a uniform value wasn't vectorized.
Differential Revision: http://reviews.llvm.org/D18940
llvm-svn: 265901
InstCombine cannot effectively remove redundant assumptions without them
registered in the assumption cache. The vectorizer can create identical
assumptions but doesn't register them with the cache, resulting in
slower compile times because InstCombine tries to reason about a lot
more assumptions.
Fix this by registering the cloned assumptions.
llvm-svn: 265800
This re-commits r265535 which was reverted in r265541 because it
broke the windows bots. The problem was that we had a PointerIntPair
which took a pointer to a struct allocated with new. The problem
was that new doesn't provide sufficient alignment guarantees.
This pattern was already present before r265535 and it just happened
to work. To fix this, we now separate the PointerToIntPair from the
ExitNotTakenInfo struct into a pointer and a bool.
Original commit message:
Summary:
When the backedge taken codition is computed from an icmp, SCEV can
deduce the backedge taken count only if one of the sides of the icmp
is an AddRecExpr. However, due to sign/zero extensions, we sometimes
end up with something that is not an AddRecExpr.
However, we can use SCEV predicates to produce a 'guarded' expression.
This change adds a method to SCEV to get this expression, and the
SCEV predicate associated with it.
In HowManyGreaterThans and HowManyLessThans we will now add a SCEV
predicate associated with the guarded backedge taken count when the
analyzed SCEV expression is not an AddRecExpr. Note that we only do
this as an alternative to returning a 'CouldNotCompute'.
We use new feature in Loop Access Analysis and LoopVectorize to analyze
and transform more loops.
Reviewers: anemet, mzolotukhin, hfinkel, sanjoy
Subscribers: flyingforyou, mcrosier, atrick, mssimpso, sanjoy, mzolotukhin, llvm-commits
Differential Revision: http://reviews.llvm.org/D17201
llvm-svn: 265786
Summary:
When the backedge taken codition is computed from an icmp, SCEV can
deduce the backedge taken count only if one of the sides of the icmp
is an AddRecExpr. However, due to sign/zero extensions, we sometimes
end up with something that is not an AddRecExpr.
However, we can use SCEV predicates to produce a 'guarded' expression.
This change adds a method to SCEV to get this expression, and the
SCEV predicate associated with it.
In HowManyGreaterThans and HowManyLessThans we will now add a SCEV
predicate associated with the guarded backedge taken count when the
analyzed SCEV expression is not an AddRecExpr. Note that we only do
this as an alternative to returning a 'CouldNotCompute'.
We use new feature in Loop Access Analysis and LoopVectorize to analyze
and transform more loops.
Reviewers: anemet, mzolotukhin, hfinkel, sanjoy
Subscribers: flyingforyou, mcrosier, atrick, mssimpso, sanjoy, mzolotukhin, llvm-commits
Differential Revision: http://reviews.llvm.org/D17201
llvm-svn: 265535
A catchswitch cannot be preceded by another instruction in the same
basic block (other than a PHI node).
Instead, insert the extract element right after the materialization of
the vectorized value. This isn't optimal but is a reasonable compromise
given the constraints of WinEH.
This fixes PR27163.
llvm-svn: 265157
This change prevents the loop vectorizer from vectorizing when all of the vector
types it generates will be scalarized. I've run into this problem on the PPC's QPX
vector ISA, which only holds floating-point vector types. The loop vectorizer
will, however, happily vectorize loops with purely integer computation. Here's
an example:
LV: The Smallest and Widest types: 32 / 32 bits.
LV: The Widest register is: 256 bits.
LV: Found an estimated cost of 0 for VF 1 For instruction: %indvars.iv25 = phi i64 [ 0, %entry ], [ %indvars.iv.next26, %for.body ]
LV: Found an estimated cost of 0 for VF 1 For instruction: %arrayidx = getelementptr inbounds [1600 x i32], [1600 x i32]* %a, i64 0, i64 %indvars.iv25
LV: Found an estimated cost of 0 for VF 1 For instruction: %2 = trunc i64 %indvars.iv25 to i32
LV: Found an estimated cost of 1 for VF 1 For instruction: store i32 %2, i32* %arrayidx, align 4
LV: Found an estimated cost of 1 for VF 1 For instruction: %indvars.iv.next26 = add nuw nsw i64 %indvars.iv25, 1
LV: Found an estimated cost of 1 for VF 1 For instruction: %exitcond27 = icmp eq i64 %indvars.iv.next26, 1600
LV: Found an estimated cost of 0 for VF 1 For instruction: br i1 %exitcond27, label %for.cond.cleanup, label %for.body
LV: Scalar loop costs: 3.
LV: Found an estimated cost of 0 for VF 2 For instruction: %indvars.iv25 = phi i64 [ 0, %entry ], [ %indvars.iv.next26, %for.body ]
LV: Found an estimated cost of 0 for VF 2 For instruction: %arrayidx = getelementptr inbounds [1600 x i32], [1600 x i32]* %a, i64 0, i64 %indvars.iv25
LV: Found an estimated cost of 0 for VF 2 For instruction: %2 = trunc i64 %indvars.iv25 to i32
LV: Found an estimated cost of 2 for VF 2 For instruction: store i32 %2, i32* %arrayidx, align 4
LV: Found an estimated cost of 1 for VF 2 For instruction: %indvars.iv.next26 = add nuw nsw i64 %indvars.iv25, 1
LV: Found an estimated cost of 1 for VF 2 For instruction: %exitcond27 = icmp eq i64 %indvars.iv.next26, 1600
LV: Found an estimated cost of 0 for VF 2 For instruction: br i1 %exitcond27, label %for.cond.cleanup, label %for.body
LV: Vector loop of width 2 costs: 2.
LV: Found an estimated cost of 0 for VF 4 For instruction: %indvars.iv25 = phi i64 [ 0, %entry ], [ %indvars.iv.next26, %for.body ]
LV: Found an estimated cost of 0 for VF 4 For instruction: %arrayidx = getelementptr inbounds [1600 x i32], [1600 x i32]* %a, i64 0, i64 %indvars.iv25
LV: Found an estimated cost of 0 for VF 4 For instruction: %2 = trunc i64 %indvars.iv25 to i32
LV: Found an estimated cost of 4 for VF 4 For instruction: store i32 %2, i32* %arrayidx, align 4
LV: Found an estimated cost of 1 for VF 4 For instruction: %indvars.iv.next26 = add nuw nsw i64 %indvars.iv25, 1
LV: Found an estimated cost of 1 for VF 4 For instruction: %exitcond27 = icmp eq i64 %indvars.iv.next26, 1600
LV: Found an estimated cost of 0 for VF 4 For instruction: br i1 %exitcond27, label %for.cond.cleanup, label %for.body
LV: Vector loop of width 4 costs: 1.
...
LV: Selecting VF: 8.
LV: The target has 32 registers
LV(REG): Calculating max register usage:
LV(REG): At #0 Interval # 0
LV(REG): At #1 Interval # 1
LV(REG): At #2 Interval # 2
LV(REG): At #4 Interval # 1
LV(REG): At #5 Interval # 1
LV(REG): VF = 8
The problem is that the cost model here is not wrong, exactly. Since all of
these operations are scalarized, their cost (aside from the uniform ones) are
indeed VF*(scalar cost), just as the model suggests. In fact, the larger the VF
picked, the lower the relative overhead from the loop itself (and the
induction-variable update and check), and so in a sense, picking the largest VF
here is the right thing to do.
The problem is that vectorizing like this, where all of the vectors will be
scalarized in the backend, isn't really vectorizing, but rather interleaving.
By itself, this would be okay, but then the vectorizer itself also interleaves,
and that's where the problem manifests itself. There's aren't actually enough
scalar registers to support the normal interleave factor multiplied by a factor
of VF (8 in this example). In other words, the problem with this is that our
register-pressure heuristic does not account for scalarization.
While we might want to improve our register-pressure heuristic, I don't think
this is the right motivating case for that work. Here we have a more-basic
problem: The job of the vectorizer is to vectorize things (interleaving aside),
and if the IR it generates won't generate any actual vector code, then
something is wrong. Thus, if every type looks like it will be scalarized (i.e.
will be split into VF or more parts), then don't consider that VF.
This is not a problem specific to PPC/QPX, however. The problem comes up under
SSE on x86 too, and as such, this change fixes PR26837 too. I've added Sanjay's
reduced test case from PR26837 to this commit.
Differential Revision: http://reviews.llvm.org/D18537
llvm-svn: 264904
These checks are redundant and can be removed
Reviewers: hans
Subscribers: llvm-commits, mzolotukhin
Differential Revision: http://reviews.llvm.org/D18564
llvm-svn: 264872
Summary:
Use the new LoopVersioning facility (D16712) to add noalias metadata in
the vector loop if we versioned with memchecks. This can enable some
optimization opportunities further down the pipeline (see the included
test or the benchmark improvement quoted in D16712).
The test also covers the bug I had in the initial version in D16712.
The vectorizer did not previously use LoopVersioning. The reason is
that the vectorizer performs its transformations in single shot. It
creates an empty single-block vector loop that it then populates with
the widened, if-converted instructions. Thus creating an intermediate
versioned scalar loop seems wasteful.
So this patch (rather than bringing in LoopVersioning fully) adds a
special interface to LoopVersioning to allow the vectorizer to add
no-alias annotation while still performing its own versioning.
As the vectorizer propagates metadata from the instructions in the
original loop to the vector instructions we also check the pointer in
the original instruction and see if LoopVersioning can add no-alias
metadata based on the issued memchecks.
Reviewers: hfinkel, nadav, mzolotukhin
Subscribers: mzolotukhin, llvm-commits
Differential Revision: http://reviews.llvm.org/D17191
llvm-svn: 263744
This was a latent bug that got exposed by the change to add LoopSimplify
as a dependence to LoopLoadElimination. Since LoopInfo was corrupted
after LV, LoopSimplify mis-compiled nbench in the test-suite (more
details in the PR).
The problem was that when we create the blocks for predicated stores we
didn't add those to any loops.
The original testcase for store predication provides coverage for this
assuming we verify LI on the way out of LV.
Fixes PR26952.
llvm-svn: 263565
commit ae14bf6488e8441f0f6d74f00455555f6f3943ac
Author: Mehdi Amini <mehdi.amini@apple.com>
Date: Fri Mar 11 17:15:50 2016 +0000
Remove PreserveNames template parameter from IRBuilder
Summary:
Following r263086, we are now relying on a flag on the Context to
discard Value names in release builds.
Reviewers: chandlerc
Subscribers: mzolotukhin, llvm-commits
Differential Revision: http://reviews.llvm.org/D18023
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@263258
91177308-0d34-0410-b5e6-96231b3b80d8
until we can figure out what to do about clang and Release build testing.
This reverts commit 263258.
llvm-svn: 263321
Summary:
Following r263086, we are now relying on a flag on the Context to
discard Value names in release builds.
Reviewers: chandlerc
Subscribers: mzolotukhin, llvm-commits
Differential Revision: http://reviews.llvm.org/D18023
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 263258
MinVecRegSize is currently hardcoded to 128; this patch adds a cl::opt
to allow changing it. I tried not to change any existing behavior for the default
case.
Differential revision: http://reviews.llvm.org/D13278
llvm-svn: 263089
I missed == and != when I removed implicit conversions between iterators
and pointers in r252380 since they were defined outside ilist_iterator.
Since they depend on getNodePtrUnchecked(), they indirectly rely on UB.
This commit removes all uses of these operators. (I'll delete the
operators themselves in a separate commit so that it can be easily
reverted if necessary.)
There should be NFC here.
llvm-svn: 261498
This patch enables the vectorization of first-order recurrences. A first-order
recurrence is a non-reduction recurrence relation in which the value of the
recurrence in the current loop iteration equals a value defined in the previous
iteration. The load PRE of the GVN pass often creates these recurrences by
hoisting loads from within loops.
In this patch, we add a new recurrence kind for first-order phi nodes and
attempt to vectorize them if possible. Vectorization is performed by shuffling
the values for the current and previous iterations. The vectorization cost
estimate is updated to account for the added shuffle instruction.
Contributed-by: Matthew Simpson and Chad Rosier <mcrosier@codeaurora.org>
Differential Revision: http://reviews.llvm.org/D16197
llvm-svn: 261346
Wei Mi