Summary:
We need to unpackl and unpackh the operands to use two vXi16 multiplies. Previously it looks like the low unpack would get constant folded at least in the 128-bit case after shuffle lowering turned the unpackl into ZERO_EXTEND_VECTOR_INREG and X86 custom DAG combined it. The same doesn't happen for the high half. So we'd load a constant and then shuffle it. But the low half would just be loaded and used by the multiply directly.
After this patch we now end up with a constant pool entry for the low and high unpacks separately with no shuffle operations.
This is a step towards removing custom constant folding for ZERO_EXTEND_VECTOR_INREG/SIGN_EXTEND_VECTOR_INREG in the X86 backend.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D55165
llvm-svn: 348159
Summary:
Under -x86-experimental-vector-widening-legalization, fp_to_uint/fp_to_sint with a smaller than 128 bit vector type results are custom type legalized by promoting the result to a 128 bit vector by promoting the elements, inserting an assertzext/assertsext, then truncating back to original type. The truncate will be further legalizdd to a pack shuffle. In the case of a v8i8 result type, we'll end up with a v8i16 fp_to_sint. This will need to be further legalized during vector op legalization by promoting to v8i32 and then truncating again. Under avx2 this produces good code with two pack instructions, but Under avx512 this will result in a truncate instruction and a packuswb instruction. But we should be able to get away with a single truncate instruction.
The other option is to promote all the way to vXi32 result type during the first type legalization. But in some experimentation that seemed to require more work to produce good code for other configurations.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D54836
llvm-svn: 348158
The clang frontend no longer emits the current working directory for
DIFiles containing an absolute path in the filename: and will move the
common prefix between current working directory and the file into the
directory: component.
https://reviews.llvm.org/D55085
llvm-svn: 348155
There are potential improvements to the structure of this API
raised by D54994, but remove some cosmetic blemishes before
making any functional changes.
llvm-svn: 348149
It appears that print-module-scope was not implemented for legacy SCC passes.
Fixed to print a whole module instead of just current SCC.
Reviewed By: mkazantsev
Differential Revision: https://reviews.llvm.org/D54793
llvm-svn: 348144
A loaded value with multiple users compared with 0 will become a load and
test single instruction. The load is not folded in this case (multiple
users), but the compare instruction is eliminated.
This patch returns 0 cost for the icmp in these cases.
Review: Ulrich Weigand
https://reviews.llvm.org/D55111
llvm-svn: 348141
Summary:
SSBS (Speculative Store Bypass Safe) is only mandatory from 8.5
onwards but is optional from Armv8.0-A. This patch adds a command
line option to enable SSBS, as it was previously only possible to
enable by selecting -march=armv8.5-a.
Similar patch upstream in GNU binutils:
https://sourceware.org/ml/binutils/2018-09/msg00274.html
Reviewers: olista01, samparker, aemerson
Reviewed By: samparker
Subscribers: javed.absar, kristof.beyls, kristina, llvm-commits
Differential Revision: https://reviews.llvm.org/D54629
llvm-svn: 348137
The introduction of S_{ADD|SUB}_U64_PSEUDO instructions which are decomposed
into VOP3 instruction pairs for S_ADD_U64_PSEUDO:
V_ADD_I32_e64
V_ADDC_U32_e64
and for S_SUB_U64_PSEUDO
V_SUB_I32_e64
V_SUBB_U32_e64
preclude the use of SDWA to encode a constant.
SDWA: Sub-Dword addressing is supported on VOP1 and VOP2 instructions,
but not on VOP3 instructions.
We desire to fold the bit-and operand into the instruction encoding
for the V_ADD_I32 instruction. This requires that we transform the
VOP3 into a VOP2 form of the instruction (_e32).
%19:vgpr_32 = V_AND_B32_e32 255,
killed %16:vgpr_32, implicit $exec
%47:vgpr_32, %49:sreg_64_xexec = V_ADD_I32_e64
%26.sub0:vreg_64, %19:vgpr_32, implicit $exec
%48:vgpr_32, dead %50:sreg_64_xexec = V_ADDC_U32_e64
%26.sub1:vreg_64, %54:vgpr_32, killed %49:sreg_64_xexec, implicit $exec
which then allows the SDWA encoding and becomes
%47:vgpr_32 = V_ADD_I32_sdwa
0, %26.sub0:vreg_64, 0, killed %16:vgpr_32, 0, 6, 0, 6, 0,
implicit-def $vcc, implicit $exec
%48:vgpr_32 = V_ADDC_U32_e32
0, %26.sub1:vreg_64, implicit-def $vcc, implicit $vcc, implicit $exec
Differential Revision: https://reviews.llvm.org/D54882
llvm-svn: 348132
This has two positive effects. First, using a custom node prevents
recombination leading to an infinite loop since the output DAG is notionally a
little more complex than the input one. Using a flag-setting instruction also
allows the subtraction to be folded with the related comparison more easily.
https://reviews.llvm.org/D53190
llvm-svn: 348122
This patch splits backend features currently
hidden behind architecture versions.
For example, currently the only way to activate
complex numbers extension is targeting an v8.3
architecture, where after the patch this extension
can be added separately.
This refactoring is required by the new command lines proposal:
http://lists.llvm.org/pipermail/llvm-dev/2018-September/126346.html
Reviewers: DavidSpickett, olista01, t.p.northover
Subscribers: kristof.beyls, bryanpkc, javed.absar, pbarrio
Differential revision: https://reviews.llvm.org/D54633
llvm-svn: 348121
When there is no .debug_addr section for some reason,
llvm-dwarfdump would print the bogus empty section name when dumping ranges
in .debug_info:
DW_AT_ranges [DW_FORM_rnglistx] (indexed (0x0) rangelist = 0x00000004
[0x0000000000000000, 0x0000000000000001) ""
[0x0000000000000000, 0x0000000000000002) "")
That happens because of the code which uses 0 (zero) as a section index as a default value.
The code should use -1ULL instead because technically 0 is a valid zero section index
in ELF and -1ULL is a special constant used that means "no section available".
This is mostly a fix for the overall correctness/safety of the code,
but a test case is provided too.
Differential revision: https://reviews.llvm.org/D55113
llvm-svn: 348115
Currently, variadic operands on an MCInst are assumed to be uses,
because they come after the defs. However, this is not always the case,
for example the Arm/Thumb LDM instructions write to a variable number of
registers.
This adds a property of instruction definitions which can be used to
mark variadic operands as defs. This only affects MCInst, because
MachineInstruction already tracks use/def per operand in each instance
of the instruction, so can already represent this.
This property can then be checked in MCInstrDesc, allowing us to remove
some special cases in ARMAsmParser::isITBlockTerminator.
Differential revision: https://reviews.llvm.org/D54853
llvm-svn: 348114
In the Arm assembly parser, we first match an instruction, then call
processInstruction to possibly change it to a different encoding, to
match rules in the architecture manual which can't be expressed by the
table-generated matcher.
This adds debug printing so that this process is visible when using the
-debug option.
To support this, I've added a new overload of MCInst::dump_pretty which
takes the opcode name as a StringRef, since we don't have an InstPrinter
instance in the assembly parser. Instead, we can get the same
information directly from the MCInstrInfo.
Differential revision: https://reviews.llvm.org/D54852
llvm-svn: 348113
This change enables conservative assembly instrumentation in KMSAN builds
by default.
It's still possible to disable it with -msan-handle-asm-conservative=0
if something breaks. It's now impossible to enable conservative
instrumentation for userspace builds, but it's not used anyway.
llvm-svn: 348112
Summary:
There are 4 instructions which have Inconsistent ImmMustBeMultipleOf in the
function PPCInstrInfo::instrHasImmForm, they are LFS, LFD, STFS, STFD.
These four instructions should set the ImmMustBeMultipleOf to 1 instead of 4.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D54738
llvm-svn: 348109
In theory, we should let the PPC target to determine how to lower the TOC Entry for globals.
And the PPCTargetLowering requires this query to do some optimization for TOC_Entry.
Differential Revision: https://reviews.llvm.org/D54925
llvm-svn: 348108
If the shift amount is known, we can determine the known bits of the
output based on the known bits of two inputs.
This is essentially the same functionality as implemented in D54869,
but for ValueTracking rather than InstCombine SimplifyDemandedBits.
Differential Revision: https://reviews.llvm.org/D55140
llvm-svn: 348091
This makes the SDAG behavior consistent with the way we do this in IR.
It's possible that we were getting the wrong answer before. For example,
'xor undef, undef --> 0' but 'xor undef, C' --> undef.
But the most practical improvement is likely as shown in the tests here -
for FP, we were overconstraining undef lanes to NaN, and that can prevent
vector simplifications/narrowing (see D51553).
llvm-svn: 348090
This change prevents the crash noted in the post-commit comments
for rL347478 :
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20181119/605166.html
We can't guarantee that an oversized shift amount is folded away,
so we have to check for it.
Note that I committed an incomplete fix for that crash with:
rL347502
But as discussed here:
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20181126/605679.html
...we have to try harder.
So I'm not sure how to expose the bug now (and apparently no fuzzers have found
a way yet either).
On the plus side, we have discovered that we're missing real optimizations by
not simplifying nodes sooner, so the earlier fix still has value, and there's
likely more value in extending that so we can simplify more opcodes and simplify
when doing RAUW and/or putting nodes on the combiner worklist.
Differential Revision: https://reviews.llvm.org/D54954
llvm-svn: 348089
We were duplicating code around the existing isImpliedCondition() that
checks for a predecessor block/dominating condition, so make that a
wrapper call.
llvm-svn: 348088
Previously this code generated its own extracts and build_vector. But we can use a simpler concat_vectors or scalar_to_vector operation and let type legalization do additional legalization of those operations.
llvm-svn: 348087
The generic legalizer will fall back to a stack spill that uses a truncating store. That store will get expanded into a shuffle and non-truncating store on pre-avx512 targets. Once that happens the stack store/load pair will be combined away leaving behind the shuffle and bitcasts. On avx512 targets the truncating store is legal so doesn't get folded away.
By custom legalizing it we can avoid this churn and maybe produce better code.
llvm-svn: 348085
If we know that we'll definitely save LR to a register, there's no reason to
pre-check whether or not a stack instruction is unsafe to fix up.
This makes it so that we check for that condition before mapping instructions.
This allows us to outline more, since we don't pessimise as many instructions.
Also update some tests, since we outline more.
llvm-svn: 348081
Summary: With sse4.1 we use two zero_extend_vector_inreg and a pshufd to expand the v16i8 input into two v8i16 vectors for the multiply. That's 3 shuffles to extend one operand. The other operand is usually constant as this is mostly used by division by constant optimization. Pre sse4.1 we use a punpckhbw and a punpcklbw with a zero vector. That's two shuffles and an xor and a copy due to tied register constraints. That seems maybe better than the 3 shuffles. With AVX we avoid the copy so that's obviously better.
Reviewers: spatel, RKSimon
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D55138
llvm-svn: 348079
The identity ~(x ^ y) == (~x ^ y) == (x ^ ~y) allows XNOR (XOR/NOT) to turn into NOT/XOR. Handling this case with its own split means we can make the NOT remain in the scalar unit. Previously, we split 64-bit XNOR into two 32-bit XNOR, then lowered. Now, we get three instructions (s_not, v_xor, v_xor) rather than four in the case where either of the sources is a scalar 64-bit.
Add test cases to xnor.ll to attempt XNOR Vx, Sy and XNOR Sx, Vy. Also adding test that uses the opposite identity such that (~x ^ y) on the scalar unit (or vector for gfx906) can generate XNOR. This already worked, but I didn't see a test for it.
Differential: https://reviews.llvm.org/D55071
llvm-svn: 348075
D52935 introduced the ability for SimplifyDemandedBits to call SimplifyDemandedVectorElts through BITCASTs if the demanded bit mask entirely covered the sub element.
This patch relaxes this to demanding an element if we need any bit from it.
Differential Revision: https://reviews.llvm.org/D54761
llvm-svn: 348073
Extend ssub.sat(X, C) -> sadd.sat(X, -C) canonicalization to also
support non-splat vector constants. This is done by generalizing
the implementation of the isNotMinSignedValue() helper to return
true for constants that are non-splat, but don't contain any
signed min elements.
Differential Revision: https://reviews.llvm.org/D55011
llvm-svn: 348072
Summary:
Follow up to D54270, which allowed importing of var args functions
unless they called va_start. As pointed out in the post-commit comments
on that patch, the inliner can handle functions that call va_start in
certain situations as well. Go ahead and enable importing of all var
args functions. Measurements on a large binary show that this increases
imports and binary size by an insignificant amount.
Reviewers: davidxl
Subscribers: mehdi_amini, inglorion, eraman, steven_wu, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D54607
llvm-svn: 348068
As noted by Eli Friedman <https://reviews.llvm.org/D52977?id=168629#1315291>,
the RV64I shift patterns for SLLW/SRLW/SRAW make some incorrect assumptions.
SRAW assumed that (sext_inreg foo, i32) could only be produced when
sign-extended an i32. However, it can be produced by input such as:
define i64 @tricky_ashr(i64 %a, i64 %b) {
%1 = shl i64 %a, 32
%2 = ashr i64 %1, 32
%3 = ashr i64 %2, %b
ret i64 %3
}
It's important not to select sraw in the above case, because sraw only uses
bits lower 5 bits from the shift, while a shift of 32-63 would be valid.
Similarly, the patterns for srlw assumed (and foo, 0xffffffff) would only be
produced when zero-extending a value that was originally i32 in LLVM IR. This
is obviously incorrect.
This patch removes the SLLW/SRLW/SRAW shift patterns for the time being and
adds test cases that would demonstrate a miscompile if the incorrect patterns
were re-added.
llvm-svn: 348067
identify_magic does not need the file to be null terminated. Passing
true here causes the file reading code to decide not to use mmap in
some rare cases (which happen to be true 100% of the time in PDB files)
which can lead to very large files failing to load. Since it was
probably just an accident that we were passing true here (since it is
the default function parameter), this should be strictly an improvement.
llvm-svn: 348059
Summary:
Moving SMRD to VMEM in SIFixSGPRCopies is rather bad for performance if
the load is really uniform. So select the scalar load intrinsics directly
to either VMEM or SMRD buffer loads based on divergence analysis.
If an offset happens to end up in a VGPR -- either because a floating
point calculation was involved, or due to other remaining deficiencies
in SIFixSGPRCopies -- we use v_readfirstlane.
There is some unrelated churn in tests since we now select MUBUF offsets
in a unified way with non-scalar buffer loads.
Change-Id: I170e6816323beb1348677b358c9d380865cd1a19
Reviewers: arsenm, alex-t, rampitec, tpr
Subscribers: kzhuravl, jvesely, wdng, yaxunl, dstuttard, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D53283
llvm-svn: 348050
Summary:
The VirtReg2Value mapping is crucial for getting consistently
reliable divergence information into the SelectionDAG. This
patch fixes a bunch of issues that lead to incorrect divergence
info and introduces tight assertions to ensure we don't regress:
1. VirtReg2Value is generated lazily; there were some cases where
a lookup was performed before all relevant virtual registers were
created, leading to an out-of-sync mapping. Those cases were:
- Complex code to lower formal arguments that generated CopyFromReg
nodes from live-in registers (fixed by never querying the mapping
for live-in registers).
- Code that generates CopyToReg for formal arguments that are used
outside the entry basic block (fixed by never querying the
mapping for Register nodes, which don't need the divergence info
anyway).
2. For complex values that are lowered to a sequence of registers,
all registers must be reflected in the VirtReg2Value mapping.
I am not adding any new tests, since I'm not actually aware of any
bugs that these problems are causing with trunk as-is. However,
I recently added a test case (in r346423) which fails when D53283 is
applied without this change. Also, the new assertions should provide
most of the effective test coverage.
There is one test change in sdwa-peephole.ll. The underlying issue
is that since the divergence info is now correct, the DAGISel will
select V_OR_B32 directly instead of S_OR_B32. This leads to an extra
COPY which affects the behavior of MachineLICM in a way that ends up
with the S_MOV_B32 with the constant in a different basic block than
the V_OR_B32, which is presumably what defeats the peephole.
Reviewers: alex-t, arsenm, rampitec
Subscribers: kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D54340
llvm-svn: 348049
Summary:
This is patch #3 of the new DivergenceAnalysis
<https://lists.llvm.org/pipermail/llvm-dev/2018-May/123606.html>
The GPUDivergenceAnalysis is intended to eventually supersede the existing
LegacyDivergenceAnalysis. The existing LegacyDivergenceAnalysis produces
incorrect results on unstructured Control-Flow Graphs:
<https://bugs.llvm.org/show_bug.cgi?id=37185>
This patch adds the option -use-gpu-divergence-analysis to the
LegacyDivergenceAnalysis to turn it into a transparent wrapper for the
GPUDivergenceAnalysis.
Reviewers: nhaehnle
Reviewed By: nhaehnle
Subscribers: jholewinski, jvesely, jfb, llvm-commits, alex-t, sameerds, arsenm, nhaehnle
Differential Revision: https://reviews.llvm.org/D53493
llvm-svn: 348048
Instead of treating the outlined functions for these as distinct frames, they
should be combined into one case. Neither allows for stack fixups, and both
generate the same frame. Thus, they ought to be considered one case.
This makes the code far easier to understand, for one thing. It also offers
some small code size improvements. It's fairly rare to see a class of outlined
functions that doesn't fall entirely into one variant (on CTMark anyway). It
does happen from time to time though.
This mostly offers some serious simplification.
Also update the test to show the added functionality.
llvm-svn: 348036
All that you can legitimately do with the CFI for a nounwind function
is get a backtrace, and adjusting the SCS register is not (currently)
required for this purpose.
Differential Revision: https://reviews.llvm.org/D54988
llvm-svn: 348035
Summary:
When mem2reg inserts phi nodes in blocks with unreachable predecessors,
it adds undef operands for those incoming edges. When there are
multiple such predecessors, the order is currently based on the address
of the BasicBlocks. This change fixes that by using the BBNumbers in
the sort/search predicates, as is done elsewhere in mem2reg to ensure
determinism.
Also adds a testcase with a bunch of unreachable preds, which
(nodeterministically) fails without the fix.
Reviewers: majnemer
Reviewed By: majnemer
Subscribers: mgrang, llvm-commits
Differential Revision: https://reviews.llvm.org/D55077
llvm-svn: 348024
Update IR verifier to check the constraint that DIFile source is present on all
files or no files.
Differential Revision: https://reviews.llvm.org/D54953
llvm-svn: 348022
This reduces the number of shuffle operations that need to be done. The splitting strategy requires the shuffle unit for the extraction and the extension. With the unpack strategy the unpacks accomplish a splitting and extending in one operation.
llvm-svn: 348019
This does require a constant pool load instead of loading an immediate into a gpr, moving to a k register and masking. But its less instructions and more consistent with previous ISAs. It probably opens up more combine opportunities as one of the test cases demonstrates.
llvm-svn: 348018
This patch adds BPF Debug Format (BTF) as a standalone
LLVM debuginfo. The BTF related sections are directly
generated from IR. The BTF debuginfo is generated
only when the compilation target is BPF.
What is BTF?
============
First, the BPF is a linux kernel virtual machine
and widely used for tracing, networking and security.
https://www.kernel.org/doc/Documentation/networking/filter.txthttps://cilium.readthedocs.io/en/v1.2/bpf/
BTF is the debug info format for BPF, introduced in the below
linux patch
69b693f0ae (diff-06fb1c8825f653d7e539058b72c83332)
in the patch set mentioned in the below lwn article.
https://lwn.net/Articles/752047/
The BTF format is specified in the above github commit.
In summary, its layout looks like
struct btf_header
type subsection (a list of types)
string subsection (a list of strings)
With such information, the kernel and the user space is able to
pretty print a particular bpf map key/value. One possible example below:
Withtout BTF:
key: [ 0x01, 0x01, 0x00, 0x00 ]
With BTF:
key: struct t { a : 1; b : 1; c : 0}
where struct is defined as
struct t { char a; char b; short c; };
How BTF is generated?
=====================
Currently, the BTF is generated through pahole.
https://git.kernel.org/pub/scm/devel/pahole/pahole.git/commit/?id=68645f7facc2eb69d0aeb2dd7d2f0cac0feb4d69
and available in pahole v1.12
https://git.kernel.org/pub/scm/devel/pahole/pahole.git/commit/?id=4a21c5c8db0fcd2a279d067ecfb731596de822d4
Basically, the bpf program needs to be compiled with -g with
dwarf sections generated. The pahole is enhanced such that
a .BTF section can be generated based on dwarf. This format
of the .BTF section matches the format expected by
the kernel, so a bpf loader can just take the .BTF section
and load it into the kernel.
8a138aed4a
The .BTF section layout is also specified in this patch:
with file include/llvm/BinaryFormat/BTF.h.
What use cases this patch tries to address?
===========================================
Currently, only the bpf instruction stream is required to
pass to the kernel. The kernel verifies it, jits it if configured
to do so, attaches it to a particular kernel attachment point,
and later executes when a particular event happens.
This patch tries to expand BTF to support two more use cases below:
(1). BPF supports subroutine calls.
During performance analysis, it would be good to
differentiate which call is hot instead of just
providing a virtual address. This would require to
pass a unique identifier for each subroutine to
the kernel, the subroutine name is a natual choice.
(2). If a particular jitted instruction is hot, we want
user to know which source line this jitted instruction
belongs to. This would require the source information
is available to various profiling tools.
Note that in a single ELF file,
. there may be multiple loadable bpf programs,
. for a particular to-be-loaded bpf instruction stream,
its instructions may come from multiple PROGBITS sections,
the bpf loader needs to merge them together to a single
consecutive insn stream before loading to the kernel.
For example:
section .text: subroutines funcFoo
section _progA: calling funcFoo
section _progB: calling funcFoo
The bpf loader could construct two loadable bpf instruction
streams and load them into the kernel:
. _progA funcFoo
. _progB funcFoo
So per ELF section function offset and instruction offset
will need to be adjusted before passing to the kernel, and
the kernel essentially expect only one code section regardless
of how many in the ELF file.
What do we propose and Why?
===========================
To support the above two use cases, we propose to
add an additional section, .BTF.ext, to the ELF file
which is the input of the bpf loader. A different section
is preferred since loader may need to manipulate it before
loading part of its data to the kernel.
The .BTF.ext section has a similar header to the .BTF section
and it contains two subsections for func_info and line_info.
. the func_info maps the func insn byte offset to a func
type in the .BTF type subsection.
. the line_info maps the insn byte offset to a line info.
. both func_info and line_info subsections are organized
by ELF PROGBITS AX sections.
pahole is not a good place to implement .BTF.ext as
pahole is mostly for structure hole information and more
importantly, we want to pass the actual code to the kernel.
. bpf program typically is small so storage overhead
should be small.
. in bpf land, it is totally possible that
an application loads the bpf program into the
kernel and then that application quits, so
holding debug info by the user space application
is not practical as you may not even know who
loads this bpf program.
. having source codes directly kept by kernel
would ease deployment since the original source
code does not need ship on every hosts and
kernel-devel package does not need to be
deployed even if kernel headers are used.
LLVM is a good place to implement.
. The only reliable time to get the source code is
during compilation time. This will result in both more
accurate information and easier deployment as
stated in the above.
. Another consideration is for JIT. The project like bcc
(https://github.com/iovisor/bcc)
use MCJIT to compile a C program into bpf insns and
load them to the kernel. The llvm generated BTF sections
will be readily available for such cases as well.
Design and implementation of emiting .BTF/.BTF.ext sections
===========================================================
The BTF debuginfo format is defined. Both .BTF and .BTF.ext
sections are generated directly from IR when both
"-target bpf" and "-g" are specified. Note that
dwarf sections are still generated as dwarf is used
by user space tools like llvm-objdump etc. for BPF target.
This patch also contains tests to verify generated
.BTF and .BTF.ext sections for all supported types, func_info
and line_info subsections. The patch is also tested
against linux kernel bpf sample tests and selftests.
Signed-off-by: Yonghong Song <yhs@fb.com>
Differential Revision: https://reviews.llvm.org/D53736
llvm-svn: 347999
Summary:
If a given liveness arg of STATEPOINT is at a fixed frame index
(e.g. a function argument passed on stack), prefer to use this
fixed location even the address is also in a register. If we use
the register it will generate a spill, which is not necessary
since the fixed frame index can be directly recorded in the stack
map.
Patch by Cherry Zhang <cherryyz@google.com>.
Reviewers: thanm, niravd, reames
Reviewed By: reames
Subscribers: cherryyz, reames, anna, arphaman, llvm-commits
Differential Revision: https://reviews.llvm.org/D53889
llvm-svn: 347998
Summary:
An additional fix for PR39774. Need to update the references for the
RedcutionRoot instruction when it is replaced during the vectorization
phase to avoid compiler crash on reduction vectorization.
Reviewers: RKSimon, spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D55017
llvm-svn: 347997
Introduces DPP pseudo instructions and the pass that combines DPP mov with subsequent uses.
Differential revision: https://reviews.llvm.org/D53762
llvm-svn: 347993
Summary:
This simplifies writing predicates for pattern fragments that are
automatically re-associated or commuted.
For example, a followup patch adds patterns for fragments of the form
(add (shl $x, $y), $z) to the AMDGPU backend. Such patterns are
automatically commuted to (add $z, (shl $x, $y)), which makes it basically
impossible to refer to $x, $y, and $z generically in the PredicateCode.
With this change, the PredicateCode can refer to $x, $y, and $z simply
as `Operands[i]`.
Test confirmed that there are no changes to any of the generated files
when building all (non-experimental) targets.
Change-Id: I61c00ace7eed42c1d4edc4c5351174b56b77a79c
Reviewers: arsenm, rampitec, RKSimon, craig.topper, hfinkel, uweigand
Subscribers: wdng, tpr, llvm-commits
Differential Revision: https://reviews.llvm.org/D51994
llvm-svn: 347992
This patch adds CSR instructions aliases for the cases where the instruction
takes an immediate operand but the alias doesn't have the i suffix. This is
necessary for gas/gcc compatibility.
gas doesn't do a similar conversion for fsflags or fsrm, so this should be
complete.
Differential Revision: https://reviews.llvm.org/D55008
Patch by Luís Marques.
llvm-svn: 347991
Adding a new reduction pattern match for vectorizing code similar
to TSVC s3111:
for (int i = 0; i < N; i++)
if (a[i] > b)
sum += a[i];
This patch adds support for fadd, fsub and fmull, as well as multiple
branches and different (but compatible) instructions (ex. add+sub) in
different branches.
The difference from the previous patch(https://reviews.llvm.org/D49168)
is as follows:
- Added check of fast-math property of fp-instruction to the
previous patch
- Fix/add some pattern for if-reduction.ll
Differential Revision: https://reviews.llvm.org/D54464
Patch by Takahiro Miyoshi <takahiro.miyoshi@linaro.org>
and Masakazu Ueno <masakazu.ueno@linaro.org>
llvm-svn: 347989
This patch adds support for UNIMP in both 32- and 16-bit forms. The 32-bit
form can be seen as a variant of the ECALL/EBREAK/etc. family of instructions.
The 16-bit form is just all zeroes, which isn't a valid RISC-V instruction,
but still follows the 16-bit instruction form (i.e. bits 0-1 != 11).
Until recently unimp was undocumented and supported just by binutils, which
printed unimp for either the 16 or 32-bit form. Both forms are now documented
<https://github.com/riscv/riscv-asm-manual/pull/20> and binutils now supports
c.unimp <https://sourceware.org/ml/binutils-cvs/2018-11/msg00179.html>.
Differential Revision: https://reviews.llvm.org/D54316
Patch by Luís Marques.
llvm-svn: 347988
For targets where i32 is not a legal type (e.g. 64-bit RISC-V),
LegalizeIntegerTypes must promote the result of ISD::FLT_ROUNDS_.
Differential Revision: https://reviews.llvm.org/D53820
llvm-svn: 347986
For targets where i32 is not a legal type (e.g. 64-bit RISC-V),
LegalizeIntegerTypes must promote the operands of ISD::PREFETCH.
Differential Revision: https://reviews.llvm.org/D53281
llvm-svn: 347980
Terminator folding transform lacks MemorySSA update for memory Phis,
while they exist within MemorySSA analysis. They need exactly the same
type of updates as regular Phis. Failing to update them properly ends up
with inconsistent MemorySSA and manifests in various assertion failures.
This patch adds Memory Phi updates to this transform.
Thanks to @jonpa for finding this!
Differential Revision: https://reviews.llvm.org/D55050
Reviewed By: asbirlea
llvm-svn: 347979
For targets where i32 is not a legal type (e.g. 64-bit RISC-V),
LegalizeIntegerTypes must promote the operand.
Differential Revision: https://reviews.llvm.org/D53279
llvm-svn: 347978
DAGTypeLegalizer::PromoteSetCCOperands currently prefers to zero-extend
operands when it is able to do so. For some targets this is more expensive
than a sign-extension, which is also a valid choice. Introduce the
isSExtCheaperThanZExt hook and use it in the new SExtOrZExtPromotedInteger
helper. On RISC-V, we prefer sign-extension for FromTy == MVT::i32 and ToTy ==
MVT::i64, as it can be performed using a single instruction.
Differential Revision: https://reviews.llvm.org/D52978
llvm-svn: 347977
As discussed in the RFC
<http://lists.llvm.org/pipermail/llvm-dev/2018-October/126690.html>, 64-bit
RISC-V has i64 as the only legal integer type. This patch introduces patterns
to support codegen of the new instructions
introduced in RV64I: addiw, addiw, subw, sllw, slliw, srlw, srliw, sraw,
sraiw, ld, sd.
Custom selection code is needed for srliw as SimplifyDemandedBits will remove
lower bits from the mask, meaning the obvious pattern won't work:
def : Pat<(sext_inreg (srl (and GPR:$rs1, 0xffffffff), uimm5:$shamt), i32),
(SRLIW GPR:$rs1, uimm5:$shamt)>;
This is sufficient to compile and execute all of the GCC torture suite for
RV64I other than those files using frameaddr or returnaddr intrinsics
(LegalizeDAG doesn't know how to promote the operands - a future patch
addresses this).
When promoting i32 sltu/sltiu operands, it would be more efficient to use
sign-extension rather than zero-extension for RV64. A future patch adds a hook
to allow this.
Differential Revision: https://reviews.llvm.org/D52977
llvm-svn: 347973
Previously we emitted a punpcklbw/punpckhbw to move the byte elements into the upper half of 16 bit elements then shifted right by 8 to zero the upper bits. After DAG combine we end up with punpcklbw/punpckhbw into the lower bits with zeros in the uppers bits and no shifts. So just emit that directly.
llvm-svn: 347966
Don't expand SDIV with an immediate that is a power of 2 if we optimise for
minimum code size. For example:
sdiv %1, i32 4
gets expanded to a sequence of 3 instructions, but this is suboptimal for
minimum code size so instead we just generate a MOV and a SDIV if integer
division is supported.
Differential Revision: https://reviews.llvm.org/D54546
llvm-svn: 347965
Three minor changes to these extra costs:
* For ICmp instructions, instead of adding 2 all the time for extending each
operand, this is only done if that operand is neither a load or an
immediate.
* The operands extension costs for divides removed, because we now use a high
cost already for the divide (20).
* The costs for lhsr/ashr extra costs removed as this did not seem useful.
Review: Ulrich Weigand
https://reviews.llvm.org/D55053
llvm-svn: 347961
We had a EVT variable capturing the result of getSimpleValueType which returns an MVT. Another place using EVT that could have been MVT. And an 'int' that should be 'unsigned'.
llvm-svn: 347959
Summary:
Suppressed warnings in release builds due to variable used
only in assert statement.
Subscribers: llvm-commits, eraman, mgorny
Differential Revision: https://reviews.llvm.org/D55100
llvm-svn: 347939
r320789 suppressed moving the insertion point of SCEV expressions with
dev/rem operations to the loop header in non-loop-invariant situations.
This, and similar, hoisting is also unsafe in the loop-invariant case,
since there may be a guard against a zero denominator. This is an
adjustment to the fix of r320789 to suppress the movement even in the
loop-invariant case.
This fixes PR30806.
Differential Revision: https://reviews.llvm.org/D54713
llvm-svn: 347934
Summary:
Expands for vector types all of the integer operations that are
expanded for scalars because they are not supported at all by
WebAssembly.
This CL has no tests because such tests would really be testing the
target-independent expansion, but I'm happy to add tests if reviewers
think it would be helpful.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D55010
llvm-svn: 347923
Scattered ARM relocations for Mach-O's only have 24 bits available to
encode the offset. This is not checked but just truncated and can result
in corrupt binaries after linking because the relocations are applied to
the wrong offset. This patch will check and error out in those
situations instead of emitting a wrong relocation.
Patch by: Sander Bogaert (dzn)
Differential revision: https://reviews.llvm.org/D54776
llvm-svn: 347922
The motivating case for this is shown in:
https://bugs.llvm.org/show_bug.cgi?id=32023
and the corresponding rot16.ll regression tests.
Because x86 scalar shift amounts are i8 values, we can end up with trunc-binop-trunc
sequences that don't get folded in IR.
As the TODO comments suggest, there will be regressions if we extend this (for x86,
we mostly seem to be missing LEA opportunities, but there are likely vector folds
missing too). I think those should be considered existing bugs because this is the
same transform that we do as an IR canonicalization in instcombine. We just need
more tests to make those visible independent of this patch.
Differential Revision: https://reviews.llvm.org/D54640
llvm-svn: 347917
Utilise a similar ('late') lowering strategy to D47882. The changes to
AtomicExpandPass allow this strategy to be utilised by other targets which
implement shouldExpandAtomicCmpXchgInIR.
All cmpxchg are lowered as 'strong' currently and failure ordering is ignored.
This is conservative but correct.
Differential Revision: https://reviews.llvm.org/D48131
llvm-svn: 347914
Also revert fix r347876
One of the buildbots was reporting a failure in some relevant tests that I can't
repro or explain at present, so reverting until I can isolate.
llvm-svn: 347911
Currently CaptureTracker gives up if it encounters a value with more than 20
uses. The motivation for this cap is to keep it relatively cheap for
BasicAliasAnalysis use case, where the results can't be cached. Although, other
clients of CaptureTracker might be ok with higher cost. This patch introduces an
argument for PointerMayBeCaptured functions to specify the max number of uses to
explore. The motivation for this change is a downstream user of CaptureTracker,
but I believe upstream clients of CaptureTracker might also benefit from more
fine grained cap.
Reviewed By: hfinkel
Differential Revision: https://reviews.llvm.org/D55042
llvm-svn: 347910
It makes more sense to order FI-based memops in descending order when
the stack goes down. This allows offsets to stay "consecutive" and allow
easier pattern matching.
llvm-svn: 347906
I believe we should be legalizing these with the rest of vector binary operations. If any custom lowering is required for these nodes, this will give the DAG combine between LegalizeVectorOps and LegalizeDAG to run on the custom code before constant build_vectors are lowered in LegalizeDAG.
I've moved MULHU/MULHS handling in AArch64 from Lowering to isel. Moving the lowering earlier caused build_vector+extract_subvector simplifications to kick in which made the generated code worse.
Differential Revision: https://reviews.llvm.org/D54276
llvm-svn: 347902
This is another patch for -x86-experimental-vector-widening. This pre widens narrow division by constants so that we can get pass the legal type check in the generic DAG combiner. Otherwise we end up scalarizing.
I've restricted this to splats for now because it was easy to just call DAG.getConstant. Not sure what we should do for non-splat? Increase the element size?Widen the constant vector by padding with 1?
Differential Revision: https://reviews.llvm.org/D54919
llvm-svn: 347898
This is an almost direct move of the functionality from InstCombine to
InstSimplify. There's no reason not to do this in InstSimplify because
we never create a new value with this transform.
(There's a question of whether any dominance-based transform belongs in
either of these passes, but that's a separate issue.)
I've changed 1 of the conditions for the fold (1 of the blocks for the
branch must be the block we started with) into an assert because I'm not
sure how that could ever be false.
We need 1 extra check to make sure that the instruction itself is in a
basic block because passes other than InstCombine may be using InstSimplify
as an analysis on values that are not wired up yet.
The 3-way compare changes show that InstCombine has some kind of
phase-ordering hole. Otherwise, we would have already gotten the intended
final result that we now show here.
llvm-svn: 347896
This commit caused a large compile-time slowdown in some cases when NDEBUG is
off due to the dominator tree verification it added. Fix this by only doing
dominator tree and loop info verification when something has been hoisted.
Differential Revision: https://reviews.llvm.org/D52827
llvm-svn: 347889
Summary:
We can sometimes end up with multiple copies of a local variable that
have the same GUID in the index. This happens when there are local
variables with the same name that are in different source files having the
same name/path at compile time (but compiled into different bitcode objects).
In this case make sure we import the copy in the caller's module.
This enables importing both of the variables having the same GUID
(but which will have different promoted names since the module paths,
and therefore the module hashes, will be distinct).
Importing the wrong copy is particularly problematic for read only
variables, since we must import them as a local copy whenever
referenced. Otherwise we get undefs at link time.
Note that the llvm-lto.cpp and ThinLTOCodeGenerator changes are needed
for testing the distributed index case via clang, which will be sent as
a separate clang-side patch shortly. We were previously not doing the
dead code/read only computation before computing imports when testing
distributed index generation (like it was for testing importing and
other ThinLTO mechanisms alone).
Reviewers: evgeny777
Subscribers: mehdi_amini, inglorion, eraman, steven_wu, dexonsmith, dang, llvm-commits
Differential Revision: https://reviews.llvm.org/D55047
llvm-svn: 347886
This patch adds support for S_ANDN2, S_ORN2 32-bit and 64-bit instructions and adds splits to move them to the vector unit (for which there is no equivalent instruction). It modifies the way that the more complex scalar instructions are lowered to vector instructions by first breaking them down to sequences of simpler scalar instructions which are then lowered through the existing code paths. The pattern for S_XNOR has also been updated to apply inversion to one input rather than the output of the XOR as the result is equivalent and may allow leaving the NOT instruction on the scalar unit.
A new tests for NAND, NOR, ANDN2 and ORN2 have been added, and existing tests now hit the new instructions (and have been modified accordingly).
Differential: https://reviews.llvm.org/D54714
llvm-svn: 347877
My change svn-id: 347871 caused a buildbot failure due to an unused
variable def (used in an assert).
Change-Id: Ia882d18bb6fa79b4d7bbfda422b9ea5d23eab336
llvm-svn: 347876
Summary:
When splitting musttail calls, the split blocks' original terminators
get removed; inform the DTU when this happens.
Also add a testcase that fails an assertion in the DTU without this fix.
Reviewers: fhahn, junbuml
Reviewed By: fhahn
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D55027
llvm-svn: 347872
TFE and LWE support requires extra result registers that are written in the
event of a failure in order to detect that failure case.
The specific use-case that initiated these changes is sparse texture support.
This means that if image intrinsics are used with either option turned on, the
programmer must ensure that the return type can contain all of the expected
results. This can result in redundant registers since the vector size must be a
power-of-2.
This change takes roughly 6 parts:
1. Modify the instruction defs in tablegen to add new instruction variants that
can accomodate the extra return values.
2. Updates to lowerImage in SIISelLowering.cpp to accomodate setting TFE or LWE
(where the bulk of the work for these instruction types is now done)
3. Extra verification code to catch cases where intrinsics have been used but
insufficient return registers are used.
4. Modification to the adjustWritemask optimisation to account for TFE/LWE being
enabled (requires extra registers to be maintained for error return value).
5. An extra pass to zero initialize the error value return - this is because if
the error does not occur, the register is not written and thus must be zeroed
before use. Also added a new (on by default) option to ensure ALL return values
are zero-initialized that is required for sparse texture support.
6. Disable the inst_combine optimization in the presence of tfe/lwe (later TODO
for this to re-enable and handle correctly).
There's an additional fix now to avoid a dmask=0
For an image intrinsic with tfe where all result channels except tfe
were unused, I was getting an image instruction with dmask=0 and only a
single vgpr result for tfe. That is incorrect because the hardware
assumes there is at least one vgpr result, plus the one for tfe.
Fixed by forcing dmask to 1, which gives the desired two vgpr result
with tfe in the second one.
The TFE or LWE result is returned from the intrinsics using an aggregate
type. Look in the test code provided to see how this works, but in essence IR
code to invoke the intrinsic looks as follows:
%v = call {<4 x float>,i32} @llvm.amdgcn.image.load.1d.v4f32i32.i32(i32 15,
i32 %s, <8 x i32> %rsrc, i32 1, i32 0)
%v.vec = extractvalue {<4 x float>, i32} %v, 0
%v.err = extractvalue {<4 x float>, i32} %v, 1
Differential revision: https://reviews.llvm.org/D48826
Change-Id: If222bc03642e76cf98059a6bef5d5bffeda38dda
llvm-svn: 347871
1. The variables were confusing: 'C' typically refers to a constant, but here it was the Cmp.
2. Formatting violations.
3. Simplify code to return true/false constant.
llvm-svn: 347868
This reverts commits r347776 and r347778.
The first one, r347776, caused significant compile time regressions
for certain input files, see PR39836 for details.
llvm-svn: 347867
It causes asserts building BoringSSL. See https://crbug.com/91009#c3 for
repro.
This also reverts the follow-ups:
Revert r347724 "Do not insert prefetches with unsupported memory operands."
Revert r347606 "[X86] Add dependency from X86 to ProfileData after rL347596"
Revert r347607 "Add new passes to X86 pipeline tests"
llvm-svn: 347864
* Tell the StackProtector pass to generate the epilogue instrumentation
when GlobalISel is enabled because GISel currently does not implement
the same deferred epilogue insertion as SelectionDAG.
* Update StackProtector::InsertStackProtectors() to find a stack guard
slot by searching for the llvm.stackprotector intrinsic when the
prologue was not created by StackProtector itself but the pass still
needs to generate the epilogue instrumentation. This fixes a problem
when the pass would abort because the stack guard AllocInst pointer
was null when generating the epilogue -- test
CodeGen/AArch64/GlobalISel/arm64-irtranslator-stackprotect.ll.
Differential Revision: https://reviews.llvm.org/D54518
llvm-svn: 347862
Change meaning of TargetOptions::EnableGlobalISel. The flag was
previously set only when a target switched on GlobalISel but it is now
always set when the GlobalISel pipeline is enabled. This makes the flag
consistent with TargetOptions::EnableFastISel and allows its use in
other parts of the compiler to determine when GlobalISel is enabled.
The EnableGlobalISel flag had previouly only one use in
TargetPassConfig::isGlobalISelAbortEnabled(). The method used its value
to determine if GlobalISel was enabled by a target and returned false in
such a case. To preserve the current behaviour, a new flag
TargetOptions::GlobalISelAbort is introduced to separately record the
abort behaviour.
Differential Revision: https://reviews.llvm.org/D54518
llvm-svn: 347861
This patch adds the ability to specify via tablegen which processor resources
are load/store queue resources.
A new tablegen class named MemoryQueue can be optionally used to mark resources
that model load/store queues. Information about the load/store queue is
collected at 'CodeGenSchedule' stage, and analyzed by the 'SubtargetEmitter' to
initialize two new fields in struct MCExtraProcessorInfo named `LoadQueueID` and
`StoreQueueID`. Those two fields are identifiers for buffered resources used to
describe the load queue and the store queue.
Field `BufferSize` is interpreted as the number of entries in the queue, while
the number of units is a throughput indicator (i.e. number of available pickers
for loads/stores).
At construction time, LSUnit in llvm-mca checks for the presence of extra
processor information (i.e. MCExtraProcessorInfo) in the scheduling model. If
that information is available, and fields LoadQueueID and StoreQueueID are set
to a value different than zero (i.e. the invalid processor resource index), then
LSUnit initializes its LoadQueue/StoreQueue based on the BufferSize value
declared by the two processor resources.
With this patch, we more accurately track dynamic dispatch stalls caused by the
lack of LS tokens (i.e. load/store queue full). This is also shown by the
differences in two BdVer2 tests. Stalls that were previously classified as
generic SCHEDULER FULL stalls, are not correctly classified either as "load
queue full" or "store queue full".
About the differences in the -scheduler-stats view: those differences are
expected, because entries in the load/store queue are not released at
instruction issue stage. Instead, those are released at instruction executed
stage. This is the main reason why for the modified tests, the load/store
queues gets full before PdEx is full.
Differential Revision: https://reviews.llvm.org/D54957
llvm-svn: 347857
Summary:
MachineLoopInfo cannot be relied on for correctness, because it cannot
properly recognize loops in irreducible control flow which can be
introduced by late machine basic block optimization passes. See the new
test case for the reduced form of an example that occurred in practice.
Use a simple fixpoint iteration instead.
In order to facilitate this change, refactor WaitcntBrackets so that it
only tracks pending events and registers, rather than also maintaining
state that is relevant for the high-level algorithm. Various accessor
methods can be removed or made private as a consequence.
Affects (in radv):
- dEQP-VK.glsl.loops.special.{for,while}_uniform_iterations.select_iteration_count_{fragment,vertex}
Fixes: r345719 ("AMDGPU: Rewrite SILowerI1Copies to always stay on SALU")
Reviewers: msearles, rampitec, scott.linder, kanarayan
Subscribers: arsenm, kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits, hakzsam
Differential Revision: https://reviews.llvm.org/D54231
llvm-svn: 347853
Summary:
There is one obsolete reference to using -1 as an indication of "unknown",
but this isn't actually used anywhere.
Using unsigned makes robust wrapping checks easier.
Reviewers: msearles, rampitec, scott.linder, kanarayan
Subscribers: arsenm, kzhuravl, jvesely, wdng, yaxunl, dstuttard, llvm-commits, tpr, t-tye, hakzsam
Differential Revision: https://reviews.llvm.org/D54230
llvm-svn: 347852
Summary:
Instead of storing the "score" (last time point) of the various relevant
events, only store whether an event is pending or not.
This is sufficient, because whenever only one event of a count type is
pending, its last time point is naturally the upper bound of all time
points of this count type, and when multiple event types are pending,
the count type has gone out of order and an s_waitcnt to 0 is required
to clear any pending event type (and will then clear all pending event
types for that count type).
This also removes the special handling of GDS_GPR_LOCK and EXP_GPR_LOCK.
I do not understand what this special handling ever attempted to achieve.
It has existed ever since the original port from an internal code base,
so my best guess is that it solved a problem related to EXEC handling in
that internal code base.
Reviewers: msearles, rampitec, scott.linder, kanarayan
Subscribers: arsenm, kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits, hakzsam
Differential Revision: https://reviews.llvm.org/D54228
llvm-svn: 347850
Summary:
It hides the type casting ugliness, and I happened to have to add a new
such loop (in a later patch).
Reviewers: msearles, rampitec, scott.linder, kanarayan
Subscribers: arsenm, kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits, hakzsam
Differential Revision: https://reviews.llvm.org/D54227
llvm-svn: 347849
Summary:
Reduce the statefulness of the algorithm in two ways:
1. More clearly split generateWaitcntInstBefore into two phases: the
first one which determines the required wait, if any, without changing
the ScoreBrackets, and the second one which actually inserts the wait
and updates the brackets.
2. Communicate pre-existing s_waitcnt instructions using an argument to
generateWaitcntInstBefore instead of through the ScoreBrackets.
To simplify these changes, a Waitcnt structure is introduced which carries
the counts of an s_waitcnt instruction in decoded form.
There are some functional changes:
1. The FIXME for the VCCZ bug workaround was implemented: we only wait for
SMEM instructions as required instead of waiting on all counters.
2. We now properly track pre-existing waitcnt's in all cases, which leads
to less conservative waitcnts being emitted in some cases.
s_load_dword ...
s_waitcnt lgkmcnt(0) <-- pre-existing wait count
ds_read_b32 v0, ...
ds_read_b32 v1, ...
s_waitcnt lgkmcnt(0) <-- this is too conservative
use(v0)
more code
use(v1)
This increases code size a bit, but the reduced latency should still be a
win in basically all cases. The worst code size regressions in my shader-db
are:
WORST REGRESSIONS - Code Size
Before After Delta Percentage
1724 1736 12 0.70 % shaders/private/f1-2015/1334.shader_test [0]
2276 2284 8 0.35 % shaders/private/f1-2015/1306.shader_test [0]
4632 4640 8 0.17 % shaders/private/ue4_elemental/62.shader_test [0]
2376 2384 8 0.34 % shaders/private/f1-2015/1308.shader_test [0]
3284 3292 8 0.24 % shaders/private/talos_principle/1955.shader_test [0]
Reviewers: msearles, rampitec, scott.linder, kanarayan
Subscribers: arsenm, kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits, hakzsam
Differential Revision: https://reviews.llvm.org/D54226
llvm-svn: 347848
Lack of an attribute means that the function hasn't been checked for what vector width it requires. So if the caller or the callee doesn't have the attribute we should make sure the combined function after inlining does not have the attribute.
If the caller already doesn't have the attribute we can just avoid adding it. Otherwise if the callee doesn't have the attribute just remove the caller's attribute.
llvm-svn: 347841
This is a fix for PR39625 with improvement the compile time
by reducing the number of intermediate Phi nodes created.
Reviewers: john.brawn, reames
Reviewed By: john.brawn
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D54932
llvm-svn: 347839
Moving to PlatformType from BinaryFormat had some UB fallout when handing
unknown platforms or malformed input files.
This should fix the sanitizer bots.
llvm-svn: 347836
Add the required target triples to LLVMSupport to support Hurd
in LLVM (formally `pc-hurd-gnu`).
Patch by sthibaul (Samuel Thibault)
Differential Revision: https://reviews.llvm.org/D54378
llvm-svn: 347832
Summary:
A signed comparison of i1 values produces the opposite result to an unsigned one if the condition code
includes less-than or greater-than. This is so because 1 is the most negative signed i1 number and the
most positive unsigned i1 number. The CR-logical operations used for such comparisons are non-commutative
so for signed comparisons vs. unsigned ones, the input operands just need to be swapped.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D54825
llvm-svn: 347831
Add basic infrastructure for reading and writting TBD files (version 1 - 3).
The TextAPI library is not used by anything yet (besides the unit tests). Tool
support will be added in a separate commit.
The TBD format is currently documented in the implementation file (TextStub.cpp).
https://reviews.llvm.org/D53945
Update: This contains changes to fix issues discovered by the bots:
- add parentheses to silence warnings.
- rename variables
- use PlatformType from BinaryFormat
llvm-svn: 347823
This failed to select (which might be a separate bug) in
X86ISelDAGToDAG because we try to create a select node
that can be simplified away after rL347227.
This change avoids the problem by simplifying the SHRUNKBLEND
node sooner. In the test case, we manage to realize that the
true/false values of the select (SHRUNKBLEND) are the same thing,
so it simplifies away completely.
llvm-svn: 347818
Add basic infrastructure for reading and writting TBD files (version 1 - 3).
The TextAPI library is not used by anything yet (besides the unit tests). Tool
support will be added in a separate commit.
The TBD format is currently documented in the implementation file (TextStub.cpp).
https://reviews.llvm.org/D53945
llvm-svn: 347808
Packing the flags into one bitcode word will save effort in
adding new flags in the future.
Differential Revision: https://reviews.llvm.org/D54755
llvm-svn: 347806
Unlike most cost model functions this code makes a lot of table lookups without using the results from getTypeLegalizationCost. This means 512-bit vectors can be looked up even when the type isn't legal.
This patch adds a check around the two tables that contain 512-bit types to make sure that neither of the types would be split by type legalization. Meaning 512 bit types are illegal. I wanted to write this in a somewhat generic way that uses type legalization query hooks. But if prefered, I can switch to just using is512BitVector and the subtarget feature.
Differential Revision: https://reviews.llvm.org/D54984
llvm-svn: 347786
This fixes some of scalarization costs reported for sext/zext using avx512bw. This does not fix all scalarization costs being reported. Just the worst.
I've restricted this only to combinations of types that are legal with avx512bw like v32i1/v64i1/v32i16/v64i8 and conversions between vXi1 and vXi8/vXi16 with legal vXi8/vXi16 result types.
Differential Revision: https://reviews.llvm.org/D54979
llvm-svn: 347785
Expansion of SIGN_EXTEND_INREG can create a VSRAI instruction. If there is already a VSRAI after it, we should combine them into a larger VSRAI
Differential Revision: https://reviews.llvm.org/D54959
llvm-svn: 347784
In PR39807 we incorrectly handle circumstances where calls are common'd
from conditional blocks into the parent BB. Calls that can be inlined
must always have DebugLocs, however we strip them during commoning, which
the IR verifier asserts on.
Fix this by using applyMergedLocation: it will perform the same DebugLoc
stripping of conditional Locs, but will also generate an unknown location
DebugLoc that satisfies the requirement for inlinable calls to always have
locations.
Some of the prior logic for selecting a DebugLoc is now likely redundant;
I'll generate a follow-up to remove it (involves editing more regression
tests).
Differential Revision: https://reviews.llvm.org/D54997
llvm-svn: 347782
This commit caused failures because it failed to correctly handle cases where
we hoist a phi, then hoist a use of that phi, then have to rehoist that use. We
need to make sure that we rehoist the use to _after_ the hoisted phi, which we
do by always rehoisting to the immediate dominator instead of just rehoisting
everything to the original preheader.
An option is also added to control whether control flow is hoisted, which is
off in this commit but will be turned on in a subsequent commit.
Differential Revision: https://reviews.llvm.org/D52827
llvm-svn: 347776
This adds support in the RISCVAsmParser the storing of Subtarget feature bits to a stack so that they can be pushed/popped to enable/disable multiple features at once.
Differential Revision: https://reviews.llvm.org/D46424
Patch by Lewis Revill.
llvm-svn: 347774
Combine
sat(sat(X + C1) + C2) -> sat(X + (C1+C2))
and
sat(sat(X - C1) - C2) -> sat(X - (C1+C2))
if the sign of C1 and C2 matches.
In the unsigned case we can compute C1+C2 with saturating arithmetic,
and InstSimplify will reduce this just to the saturation value. For
the signed case, we cannot perform the simplification if the result
of the addition overflows.
This change is part of https://reviews.llvm.org/D54534.
llvm-svn: 347773
Canonicalize ssub.sat(X, C) to ssub.sat(X, -C) if C is constant and
not signed minimum. This will help further optimizations to apply.
This change is part of https://reviews.llvm.org/D54534.
llvm-svn: 347772
Always-overflow was already determined for unsigned addition, but
not subtraction. This patch establishes parity.
This allows us to perform some additional simplifications for
signed saturating subtractions.
This change is part of https://reviews.llvm.org/D54534.
llvm-svn: 347771
If ValueTracking can determine that the add/sub can newer overflow,
replace it with the corresponding nuw/nsw add/sub.
Additionally, for the unsigned case, if ValueTracking determines
that the add/sub always overflows, replace the result with the
saturation value.
This change is part of https://reviews.llvm.org/D54534.
llvm-svn: 347770
If a saturating add intrinsic has one constant argument, make sure
it is on the RHS. This will simplify further transformations.
This change is part of https://reviews.llvm.org/D54534.
llvm-svn: 347769
Summary:
This is a NFC as we do not import non-odr vague linkage when computing
for import list for a module.
Reviewers: tejohnson, pcc
Subscribers: inglorion, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D54928
llvm-svn: 347763
Summary:
If the original reduction root instruction was vectorized, it might be
removed from the tree. It means that the insertion point may become
invalidated and the whole vectorization of the reduction leads to the
incorrect output result.
The ReductionRoot instruction must be marked as externally used so it
could not be removed. Otherwise it might cause inconsistency with the
cost model and we may end up with too optimistic optimization.
Reviewers: RKSimon, spatel, hfinkel, mkuper
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D54955
llvm-svn: 347759
Before this patch, the following stores in `merge_fail` would fail to be
merged, while they would get merged in `merge_ok`:
```
void use(unsigned long long *);
void merge_fail(unsigned key, unsigned index)
{
unsigned long long args[8];
args[0] = key;
args[1] = index;
use(args);
}
void merge_ok(unsigned long long *dst, unsigned a, unsigned b)
{
dst[0] = a;
dst[1] = b;
}
```
The reason is that `getMemOpBaseImmOfs` would return false for FI base
operands.
This adds support for this.
Differential Revision: https://reviews.llvm.org/D54847
llvm-svn: 347747
Currently, instructions doing memory accesses through a base operand that is
not a register can not be analyzed using `TII::getMemOpBaseRegImmOfs`.
This means that functions such as `TII::shouldClusterMemOps` will bail
out on instructions using an FI as a base instead of a register.
The goal of this patch is to refactor all this to return a base
operand instead of a base register.
Then in a separate patch, I will add FI support to the mem op clustering
in the MachineScheduler.
Differential Revision: https://reviews.llvm.org/D54846
llvm-svn: 347746
This reverts r294500. DwarfCompileUnit::addAddressExpr uses DIEExpr
for PCOffset. In that case the expression is unrelated to thread locals
and so emitting a value of the DIEExpr does not have to always mean
emit-debug-thread-local.
llvm-svn: 347744
separate files to enable future changes.
This moves ARM and AArch64 target parsing into their
own files. They are still accessible through
TargetParser.h as before.
Several functions in AArch64 which were just forwarders to ARM
have been removed. All except AArch64::getFPUName were unused,
and that was only used in a test. Which itself was overlapping
one in ARM, so it has also been removed.
Differential revision: https://reviews.llvm.org/D53980
llvm-svn: 347741
CGF/CLGF compares an i64 register with a sign/zero extended loaded i32 value
in memory.
This patch makes such a load considered foldable and so gets a 0 cost.
Review: Ulrich Weigand
https://reviews.llvm.org/D54944
llvm-svn: 347735
AH, SH and MH costs are already covered in the cases where LHS is 32 bits and
RHS is 16 bits of memory sign-extended to i32.
As these instructions are also used when LHS is i16, this patch recognizes
that the loads will get folded then as well.
Review: Ulrich Weigand
https://reviews.llvm.org/D54940
llvm-svn: 347734
Single instructions exist for i8 and i16 comparisons of memory against a
small immediate.
This patch makes sure that if the load in these cases has a single user (the
ICmp), it gets a 0 cost (folded), and also that the ICmp gets a cost of 1.
Review: Ulrich Weigand
https://reviews.llvm.org/D54897
llvm-svn: 347733
Since byte-swapping loads and stores are supported, a 'load -> bswap' or
'bswap -> store' sequence should have the cost of one.
Review: Ulrich Weigand
https://reviews.llvm.org/D54870
llvm-svn: 347732
Summary:
This speeds up linking clang.exe/pdb with /DEBUG:GHASH by 31%, from
12.9s to 9.8s.
Symbol records are typically small (16.7 bytes on average), but we
processed them one at a time. CVSymbol is a relatively "large" type. It
wraps an ArrayRef<uint8_t> with a kind an optional 32-bit hash, which we
don't need. Before this change, each DbiModuleDescriptorBuilder would
maintain an array of CVSymbols, and would write them individually with a
BinaryItemStream.
With this change, we now add symbols that happen to appear contiguously
in bulk. For each .debug$S section (roughly one per function), we
allocate two copies, one for relocation, and one for realignment
purposes. For runs of symbols that go in the module stream, which is
most symbols, we now add them as a single ArrayRef<uint8_t>, so the
vector DbiModuleDescriptorBuilder is roughly linear in the number of
.debug$S sections (O(# funcs)) instead of the number of symbol records
(very large).
Some stats on symbol sizes for the curious:
PDB size: 507M
sym bytes: 316,508,016
sym count: 18,954,971
sym byte avg: 16.7
As future work, we may be able to skip copying symbol records in the
linker for realignment purposes if we make LLVM write them aligned into
the object file. We need to double check that such symbol records are
still compatible with link.exe, but if so, it's definitely worth doing,
since my profile shows we spend 500ms in memcpy in the symbol merging
code. We could potentially cut that in half by saving a copy.
Alternatively, we could apply the relocations *after* we iterate the
symbols. This would require some careful re-engineering of the
relocation processing code, though.
Reviewers: zturner, aganea, ruiu
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D54554
llvm-svn: 347687
We're already mixing this APInt with other 'unsigned' variables. This allows us to use regular comparison operators instead of needing to use APInt::ult or APInt::uge. And it removes a later conversion from APInt to unsigned.
I might be adding another combine to this function and this will probably simplify the logic required for that.
llvm-svn: 347684
InlineCost also treats them as free and the current implementation
can cause assertion failures if PHI nodes are moved outside the region
from entry BBs to the region.
It also updates the code to use the instructionsWithoutDebug iterator.
Reviewers: davidxl, davide, vsk, graham-yiu-huawei
Reviewed By: davidxl
Differential Revision: https://reviews.llvm.org/D54748
llvm-svn: 347683
This is skylake-avx512 with the addition of avx512vnni ISA.
Patch by Jianping Chen
Differential Revision: https://reviews.llvm.org/D54785
llvm-svn: 347681
Summary:
This (very specialized) function was added to enable an LLDB use case.
Now that a more generic interface (overriding of parser functions -
D52992) is available, and LLDB has been converted to use that (D54074),
the function is unused and can be removed.
Reviewers: erik.pilkington, sgraenitz, rsmith
Subscribers: mgorny, hiraditya, christof, libcxx-commits, llvm-commits
Differential Revision: https://reviews.llvm.org/D54893
llvm-svn: 347670
I tried to change this, not quite realising the logic behind what we
were doing. Hopefully this comment will help the next person to come
along.
llvm-svn: 347653
It fixes a bug that doesn't update Phi inputs of the only live successor that
is in the list of block's successors more than once.
Thanks @uabelho for finding this.
Differential Revision: https://reviews.llvm.org/D54849
Reviewed By: anna
llvm-svn: 347640
If we fold the bitcast into the store we'll end up creating a truncating store to vXi1 that will get scalarized. Instead allow the bitcast to be turned into a movmsk.
We probably need to do something if the store itself is a vXi1 type, but I'll leave that til a testcase appears.
llvm-svn: 347632
Summary:
IPA is implemented as module pass which produce map from Function or Alias to
StackSafetyInfo for a single function.
From prototype by Evgenii Stepanov and Vlad Tsyrklevich.
Reviewers: eugenis, vlad.tsyrklevich, pcc, glider
Subscribers: hiraditya, mgrang, llvm-commits
Differential Revision: https://reviews.llvm.org/D54543
llvm-svn: 347611
Summary:
Removing ncompatible attributes at indirect-call promoted callsites, not removing it results in
at least a IR verification error.
Reviewers: davidxl, xur, mssimpso
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D54913
llvm-svn: 347605
Summary:
Analysis produces StackSafetyInfo which contains information with how allocas
and parameters were used in functions.
From prototype by Evgenii Stepanov and Vlad Tsyrklevich.
Reviewers: eugenis, vlad.tsyrklevich, pcc, glider
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D54504
llvm-svn: 347603
Refactor the scheduling predicates based on `MCInstPredicate`. In this
case, `AArch64InstrInfo::hasExtendedReg()`.
Differential revision: https://reviews.llvm.org/D54822
llvm-svn: 347599
Refactor the scheduling predicates based on `MCInstPredicate`. In this
case, `AArch64InstrInfo::hasShiftedReg()`.
Differential revision: https://reviews.llvm.org/D54820
llvm-svn: 347598
Refactor the scheduling predicates based on `MCInstPredicate`. In this
case, `AArch64InstrInfo::isScaledAddr()`
Differential revision: https://reviews.llvm.org/D54777
llvm-svn: 347597
Summary:
Support for profile-driven cache prefetching (X86)
This change is part of a larger system, consisting of a cache prefetches recommender, create_llvm_prof (https://github.com/google/autofdo), and LLVM.
A proof of concept recommender is DynamoRIO's cache miss analyzer. It processes memory access traces obtained from a running binary and identifies patterns in cache misses. Based on them, it produces a csv file with recommendations. The expectation is that, by leveraging such recommendations, we can reduce the amount of clock cycles spent waiting for data from memory. A microbenchmark based on the DynamoRIO analyzer is available as a proof of concept: https://goo.gl/6TM2Xp.
The recommender makes prefetch recommendations in terms of:
* the binary offset of an instruction with a memory operand;
* a delta;
* and a type (nta, t0, t1, t2)
meaning: a prefetch of that type should be inserted right before the instrution at that binary offset, and the prefetch should be for an address delta away from the memory address the instruction will access.
For example:
0x400ab2,64,nta
and assuming the instruction at 0x400ab2 is:
movzbl (%rbx,%rdx,1),%edx
means that the recommender determined it would be beneficial for a prefetchnta instruction to be inserted right before this instruction, as such:
prefetchnta 0x40(%rbx,%rdx,1)
movzbl (%rbx, %rdx, 1), %edx
The workflow for prefetch cache instrumentation is as follows (the proof of concept script details these steps as well):
1. build binary, making sure -gmlt -fdebug-info-for-profiling is passed. The latter option will enable the X86DiscriminateMemOps pass, which ensures instructions with memory operands are uniquely identifiable (this causes ~2% size increase in total binary size due to the additional debug information).
2. collect memory traces, run analysis to obtain recommendations (see above-referenced DynamoRIO demo as a proof of concept).
3. use create_llvm_prof to convert recommendations to reference insertion locations in terms of debug info locations.
4. rebuild binary, using the exact same set of arguments used initially, to which -mllvm -prefetch-hints-file=<file> needs to be added, using the afdo file obtained at step 3.
Note that if sample profiling feedback-driven optimization is also desired, that happens before step 1 above. In this case, the sample profile afdo file that was used to produce the binary at step 1 must also be included in step 4.
The data needed by the compiler in order to identify prefetch insertion points is very similar to what is needed for sample profiles. For this reason, and given that the overall approach (memory tracing-based cache recommendation mechanisms) is under active development, we use the afdo format as a syntax for capturing this information. We avoid confusing semantics with sample profile afdo data by feeding the two types of information to the compiler through separate files and compiler flags. Should the approach prove successful, we can investigate improvements to this encoding mechanism.
Reviewers: davidxl, wmi, craig.topper
Reviewed By: davidxl, wmi, craig.topper
Subscribers: davide, danielcdh, mgorny, aprantl, eraman, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D54052
llvm-svn: 347596
It's possible in some cases to have a restore present
without a corresponding spill. Due to an apparent bug
in D54366 <https://reviews.llvm.org/D54366>, only the
restore for a register was emitted. It's probably
always a bug for this to happen, but due to how SGPR
spilling is implemented, this makes the issues appear
worse than it is.
llvm-svn: 347595
SplitVecOp_TruncateHelper tries to promote the result type while splitting FP_TO_SINT/UINT. It then concatenates the result and introduces a truncate to the original result type. But it does this without inserting the AssertZExt/AssertSExt that the regular result type promotion would insert. Nor does it turn FP_TO_UINT into FP_TO_SINT the way normal result type promotion for these operations does. This is bad on X86 which doesn't support FP_TO_SINT until AVX512.
This patch disables the use of SplitVecOp_TruncateHelper for these operations and just lets normal promotion handle it. I've tweaked a couple things in X86ISelLowering to avoid a few obvious regressions there. I believe all the changes on X86 are improvements. The other targets look neutral.
Differential Revision: https://reviews.llvm.org/D54906
llvm-svn: 347593
Summary:
The old legacy LTO API had a separate cache key computation, which was
a subset of the cache key computation in the new LTO API (from what I
can tell this is largely just because certain features such as CFI,
dsoLocal, etc are only utilized via the new LTO API). However, having
separate computations is unnecessary (much of the code is duplicated),
and can lead to bugs when adding new optimizations if both cache
computation algorithms aren't updated properly - it's much easier to
maintain if we have a single facility.
This patch refactors the old LTO API code to use the cache key
computation from the new LTO API. To do this, we set up an lto::Config
object and fill in the fields that the old LTO was hashing (the others
will just use the defaults).
There are two notable changes:
- I added a Freestanding flag to the LTO Config. Currently this is only
used by the legacy LTO API. In the patch that added it (D30791) I had
asked about adding it to the new LTO API, but it looks like that was not
addressed. This should probably be discussed as a follow up to this
change, as it is orthogonal.
- The legacy LTO API had some code that was hashing the GUID of all
preserved symbols defined in the module. I looked back at the history of
this (which was added with the original hashing in the legacy LTO API in
D18494), and there is a comment in the review thread that it was added
in preparation for future internalization. We now do the internalization
of course, and that is handled in the new LTO API cache key computation
by hashing the recorded linkage type of all defined globals. Therefore I
didn't try to move over and keep the preserved symbols handling.
Reviewers: steven_wu, pcc
Subscribers: mehdi_amini, inglorion, eraman, dexonsmith, dang, llvm-commits
Differential Revision: https://reviews.llvm.org/D54635
llvm-svn: 347592
We might find a target specific node that needs to be unwrapped after we look through an add/or. Otherwise we get inconsistent results if one pointer is just X86WrapperRIP and the other is (add X86WrapperRIP, C)
Differential Revision: https://reviews.llvm.org/D54818
llvm-svn: 347591
Summary:
Add a hook to the GCMetadataPrinter for emitting stack maps in
custom format. The hook will be called at stack map generation
time. The default stack map format is used if there is no hook.
For this to be useful a few data structures and accessors are
exposed from the StackMaps class, so the custom printer can
access the stack map data.
This patch authored by Cherry Zhang <cherryyz@google.com>.
Reviewers: thanm, apilipenko, reames
Reviewed By: reames
Subscribers: reames, apilipenko, nemanjai, javed.absar, kbarton, jsji, llvm-commits
Differential Revision: https://reviews.llvm.org/D53892
llvm-svn: 347584
ParentTy is never used other than an assignment, and since it is a
pointer, there is no side effect. Some versions of GCC notice and warn
on this.
Change-Id: I37dc1a18c7b58040419afb803621de13d8904a8f
llvm-svn: 347581
Summary:
STATEPOINT records its args' locations on stack relative to SP.
If the SP is changed, take that into account.
This patch authored by Cherry Zhang <cherryyz@google.com>.
Reviewers: thanm, reames
Reviewed By: reames
Subscribers: reames, llvm-commits
Differential Revision: https://reviews.llvm.org/D53603
llvm-svn: 347569
This source file has not been needed since r346522 and was triggering diagnostics in MSVC about an object file which exports no public symbols (LNK4221).
llvm-svn: 347565
Add support for funnel shifts to the DemandedBits analysis. The
demanded bits of the first two operands can be determined if the
shift amount is constant. The demanded bits of the third operand
(shift amount) can be determined if the bitwidth is a power of two.
This is basically the same functionality as implemented in D54869
and D54478, but for DemandedBits rather than InstCombine.
Differential Revision: https://reviews.llvm.org/D54876
llvm-svn: 347561
We have these 2 "isDesirable" promotion hooks (I'm not sure why we need both of them, but that's
independent of this patch), and we can adjust them to promote "mul i8 X, C" to i32. Then, all of
our existing LEA and other multiply expansion magic happens as it would for i32 ops.
Some of the test diffs show that we could end up with an actual 32-bit mul instruction here
because we choose not to expand to simpler ops. That instruction could be slower depending on the
subtarget. On the plus side, this means we don't need a separate instruction to load the constant
operand and possibly an extra instruction to move the result. If we need to tune mul i32 further,
we could add a later transform that tries to shrink it back to i8 based on subtarget timing.
I did not bother to duplicate all of the 32-bit test file RUNs and target settings that exist to
test whether LEA expansion is cheap or not. The diffs here assume a default target, so that means
LEA is generally cheap.
Differential Revision: https://reviews.llvm.org/D54803
llvm-svn: 347557
We can now select CLZ via the TableGen'erated code, so support G_CTLZ
and G_CTLZ_ZERO_UNDEF throughout the pipeline for types <= s32.
Legalizer:
If the CLZ instruction is available, use it for both G_CTLZ and
G_CTLZ_ZERO_UNDEF. Otherwise, use a libcall for G_CTLZ_ZERO_UNDEF and
lower G_CTLZ in terms of it.
In order to achieve this we need to add support to the LegalizerHelper
for the legalization of G_CTLZ_ZERO_UNDEF for s32 as a libcall (__clzsi2).
We also need to allow lowering of G_CTLZ in terms of G_CTLZ_ZERO_UNDEF
if that is supported as a libcall, as opposed to just if it is Legal or
Custom. Due to a minor refactoring of the helper function in charge of
this, we will also allow the same behaviour for G_CTTZ and G_CTPOP.
This is not going to be a problem in practice since we don't yet have
support for treating G_CTTZ and G_CTPOP as libcalls (not even in
DAGISel).
Reg bank select:
Map G_CTLZ to GPR. G_CTLZ_ZERO_UNDEF should not make it to this point.
Instruction select:
Nothing to do.
llvm-svn: 347545
Both zext and sext are currently allowed during the search for narrow
sequences and sexts operands are later added to the mac candidates.
But operands of muls are also added, without checking whether they're
sext or zext, which means we can generate a signed smlad when we
shouldn't.
Differential Revision: https://reviews.llvm.org/D54790
llvm-svn: 347542
This reverts commits r347532. Forget add the option
-mtriple powerpc64-unknown-linux-gnu. So other platform is error except
for PowerPC.
llvm-svn: 347534
Summary:
There are 4 instructions which have Inconsistent ImmMustBeMultipleOf in the
function PPCInstrInfo::instrHasImmForm, they are LFS, LFD, STFS, STFD.
These four instructions should set the ImmMustBeMultipleOf to 1 instead of 4.
Reviewed By: nemanjai
Differential Revision: https://reviews.llvm.org/D54738
llvm-svn: 347532
Summary:
getLastAccessedTime() and getLastModificationTime() provided times in nanoseconds but with only 1 second resolution, even when the underlying file system could provide more precise times than that.
These changes add sub-second precision for unix platforms that support improved precision.
Also add some comments to make sure people are aware that the resolution of times can vary across different file systems.
Reviewers: labath, zturner, aaron.ballman, kristina
Reviewed By: aaron.ballman, kristina
Subscribers: lebedev.ri, mgorny, kristina, llvm-commits
Differential Revision: https://reviews.llvm.org/D54826
llvm-svn: 347530
This should likely be adjusted to limit this transform
further, but these diffs should be clear wins.
If we have blendv/conditional move, then we should assume
those are cheap ops. The loads become independent of the
compare, so those can be speculated before we need to use
the values in the blend/mov.
llvm-svn: 347526
OriginalOp of a Predicate refers to the original IR value,
before renaming. While solving in IPSCCP, we have to use
the operand of the ssa_copy instead, to avoid missing
updates for nested conditions on the same IR value.
Fixes PR39772.
llvm-svn: 347524
rL347502 moved the null sibling, so we should group all of these
together. I'm not sure why these aren't methods of the SDValue
class itself, but that's another patch if that's possible.
llvm-svn: 347523
Support funnel shifts in InstCombine demanded bits simplification.
If the shift amount is constant, we can determine both the demanded
bits of the operands, as well as the known bits of the result.
If one of the operands has no demanded bits, it will be replaced
by undef and the funnel shift will be simplified into a simple shift
due to the simplifications added in D54778.
Differential Revision: https://reviews.llvm.org/D54869
llvm-svn: 347515
This changeset is modeled after Intel's submission for SVML. It enables
trigonometry functions vectorization via SLEEF: http://sleef.org/.
* A new vectorization library enum is added to TargetLibraryInfo.h: SLEEF.
* A new option is added to TargetLibraryInfoImpl - ClVectorLibrary: SLEEF.
* A comprehensive test case is included in this changeset.
* In a separate changeset (for clang), a new vectorization library argument is
added to -fveclib: -fveclib=SLEEF.
Trigonometry functions that are vectorized by sleef:
acos
asin
atan
atanh
cos
cosh
exp
exp2
exp10
lgamma
log10
log2
log
sin
sinh
sqrt
tan
tanh
tgamma
Patch by Stefan Teleman
Differential Revision: https://reviews.llvm.org/D53927
llvm-svn: 347510
The following simplifications are implemented:
* `fshl(X, 0, C) -> shl X, C%BW`
* `fshl(X, undef, C) -> shl X, C%BW` (assuming undef = 0)
* `fshl(0, X, C) -> lshr X, BW-C%BW`
* `fshl(undef, X, C) -> lshr X, BW-C%BW` (assuming undef = 0)
* `fshr(X, 0, C) -> shl X, (BW-C%BW)`
* `fshr(X, undef, C) -> shl X, BW-C%BW` (assuming undef = 0)
* `fshr(0, X, C) -> lshr X, C%BW`
* `fshr(undef, X, C) -> lshr, X, C%BW` (assuming undef = 0)
The simplification is only performed if the shift amount C is constant,
because we can explicitly compute C%BW and BW-C%BW in this case.
Differential Revision: https://reviews.llvm.org/D54778
llvm-svn: 347505
...and use them to avoid creating obviously undef values as
discussed in the post-commit thread for r347478.
The diffs in vector div/rem show that we were missing real
optimizations by creating bogus shift nodes.
llvm-svn: 347502
In ARMOperand::print:
- Print human-readable register names, instead of numbers.
- Print the correct names for IT condition masks (these were in the wrong order
before).
- Print all parts of memory operands, not just the base register.
This makes the output of llvm-mc -show-inst-operands more readable.
Differential revision: https://reviews.llvm.org/D54850
llvm-svn: 347494
When removing edges, we also update Phi inputs and may end up removing
a Phi if it has only one input. We should not do it for edges that leave the current
loop because these Phis are LCSSA Phis and need to be preserved.
Thanks @dmgreen for finding this!
Differential Revision: https://reviews.llvm.org/D54841
llvm-svn: 347484
This code takes a truncate, fp_to_int, or int_to_fp with a legal result type and an input type that needs to be split and enlarges the elements in the result type before doing the split. Then inserts a follow up truncate or fp_round after concatenating the two halves back together.
But if the input type of the original op is being split on its way to ultimately being scalarized we're just going to end up building a vector from scalars and then truncating or rounding it in the vector register. Seems kind of silly to enlarge the result element type of the operation only to end up with scalar code and then building a vector with large elements only to make the elements smaller again in the vector register. Seems better to just try to get away producing smaller result types in the scalarized code.
The X86 test case that changes is a pretty contrived test case that exists because of a bug we used to have in our AVG matching code. I think the code is better now, but its not realistic anyway.
llvm-svn: 347482
SplitVecOp_TruncateHelper tries to introduce a multilevel truncate to avoid scalarization. But if splitting the result type would still be a legal type we don't need to do that.
The comment block at the top of the function implied that this was already implemented. I looked back through the history and it doesn't look to have ever been checked.
llvm-svn: 347479
We fail to canonicalize IR this way (prefer 'not' ops to arbitrary 'xor'),
but that would not matter without this patch because DAGCombiner was
reversing that transform. I think we need this transform in the backend
regardless of what happens in IR to catch cases where the shift-xor
is formed late from GEP or other ops.
https://rise4fun.com/Alive/NC1
Name: shl
Pre: (-1 << C2) == C1
%shl = shl i8 %x, C2
%r = xor i8 %shl, C1
=>
%not = xor i8 %x, -1
%r = shl i8 %not, C2
Name: shr
Pre: (-1 u>> C2) == C1
%sh = lshr i8 %x, C2
%r = xor i8 %sh, C1
=>
%not = xor i8 %x, -1
%r = lshr i8 %not, C2
https://bugs.llvm.org/show_bug.cgi?id=39657
llvm-svn: 347478
A consequence of r347274 is that SCALAR_TO_VECTOR can be converted into
BUILD_VECTOR by SimplifyDemandedBits, but LowerBUILD_VECTOR can turn
BUILD_VECTOR into SCALAR_TO_VECTOR so we get an infinite loop.
Fix this by making LowerBUILD_VECTOR not do this transformation for those
vectors that would get transformed back, i.e. BUILD_VECTOR of a single-element
constant vector. Doing that means we get a DUP, which we then need to recognise
in ISel as a copy.
llvm-svn: 347456
a normal base class that provides all common "call" functionality.
This merges two complex CRTP mixins for the common "call" logic and
common operand bundle logic into a single, normal base class of
`CallInst` and `InvokeInst`. Going forward, users can typically
`dyn_cast<CallBase>` and use the resulting API. No more need for the
`CallSite` wrapper. I'm planning to migrate current usage of the wrapper
to directly use the base class and then it can be removed, but those are
simpler and much more incremental steps. The big change is to introduce
this abstraction into the type system.
I've tried to do some basic simplifications of the APIs that I couldn't
really help but touch as part of this:
- I've tried to organize the attribute API and bundle API into groups to
make understanding the API of `CallBase` easier. Without this,
I wasn't able to navigate the API sanely for all of the ways I needed
to modify it.
- I've added what seem like more clear and consistent APIs for getting
at the called operand. These ended up being especially useful to
consolidate the *numerous* duplicated code paths trying to do this.
- I've largely reworked the organization and implementation of the APIs
for computing the argument operands as they needed to change to work
with the new subclass approach.
To minimize any cost associated with this abstraction, I've moved the
operand layout in memory to store the called operand last. This makes
its position relative to the end of the operand array the same,
regardless of the subclass. It should make it much cheaper to reference
from the `CallBase` abstraction, and this is likely one of the most
frequent things to query.
We do still pay one abstraction penalty here: we have to branch to
determine whether there are 0 or 2 extra operands when computing the end
of the argument operand sequence. However, that seems both rare and
should optimize well. I've implemented this in a way specifically
designed to allow it to optimize fairly well. If this shows up in
profiles, we can add overrides of the relevant methods to the subclasses
that bypass this penalty. It seems very unlikely that this will be an
issue as the code was *already* dealing with an ever present abstraction
of whether or not there are operand bundles, so this isn't the first
branch to go into the computation.
I've tried to remove as much of the obvious vestigial API surface of the
old CRTP implementation as I could, but I suspect there is further
cleanup that should now be possible, especially around the operand
bundle APIs. I'm leaving all of that for future work in this patch as
enough things are changing here as-is.
One thing that made this harder for me to reason about and debug was the
pervasive use of unsigned values in subtraction and other arithmetic
computations. I had to debug more than one unintentional wrap. I've
switched a few of these to use `int` which seems substantially simpler,
but I've held back from doing this more broadly to avoid creating
confusing divergence within a single class's API.
I also worked to remove all of the magic numbers used to index into
operands, putting them behind named constants or putting them into
a single method with a comment and strictly using the method elsewhere.
This was necessary to be able to re-layout the operands as discussed
above.
Thanks to Ben for reviewing this (somewhat large and awkward) patch!
Differential Revision: https://reviews.llvm.org/D54788
llvm-svn: 347452
Implement getIntrinsicInstrCost() and return costs reflecting that bswap can
be done with a vperm per vector register.
Review: Ulrich Weigand
https://reviews.llvm.org/D54789
llvm-svn: 347445
GCC does it this way, and we have to be consistent. This includes
stdcall and fastcall functions with suffixes. I confirmed that a
fastcall function named "foo" ends up in ".text$foo", not
".text$@foo@8".
Based on a patch by Andrew Yohn!
Fixes PR39218.
Differential Revision: https://reviews.llvm.org/D54762
llvm-svn: 347431
This is further cleanup for PPCMCCodeEmitter. The class had been contained
within the cpp file alone. Now it has been split up between a header file and
a cpp file which allows other classes to make use of the functions in this class
if required.
llvm-svn: 347428
This transform needs to be limited.
We are converting to a constant pool load very early, and we
are turning loads that are independent of the select condition
(and therefore speculatable) into a dependent non-speculatable
load.
We may also be transferring a condition code from an FP register
to integer to create that dependent load.
llvm-svn: 347424
The MergeFunctions pass was originally intended to emit aliases
instead of thunks where possible (unnamed_addr). However, for a
long time this functionality was behind a flag hardcoded to false,
bitrotted and was eventually removed in r309313.
Originally the functionality was first disabled in r108417 due to
lack of support for aliases in Mach-O. I believe that this is no
longer the case nowadays, but not really familiar with this area.
In the interest of being conservative, this patch reintroduces the
aliasing functionality behind a default disabled -mergefunc-use-aliases
flag.
Differential Revision: https://reviews.llvm.org/D53285
llvm-svn: 347407
R_MIPS_JALR/R_MICROMIPS_JALR can now be parsed in .s files and emitted to .o.
They are still not generated with JALR.
Differential revision: https://reviews.llvm.org/D54721
llvm-svn: 347398
Currently, expressions like
.reloc 1f, R_MIPS_JALR, foo
1: nop
are not allowed, ie. an offset in .reloc can only be absolute value.
This patch adds support for labels as offsets.
If offset is a forward declared label, MCObjectStreamer keeps the fixup locally
and adds it to the fixups vector after the label (and its offset) is defined.
label+number is not supported yet.
Differential revision: https://reviews.llvm.org/D53990
llvm-svn: 347397
Add missing linkage from Nios2CodeGen library to Nios2AsmPrinter
library. The missing dependency causes shared-lib build to fail with
the following reason:
lib/Target/Nios2/CMakeFiles/LLVMNios2CodeGen.dir/Nios2AsmPrinter.cpp.o: In function `(anonymous namespace)::Nios2AsmPrinter::PrintAsmMemoryOperand(llvm::MachineInstr const*, unsigned int, unsigned int, char const*, llvm::raw_ostream&)':
Nios2AsmPrinter.cpp:(.text._ZN12_GLOBAL__N_115Nios2AsmPrinter21PrintAsmMemoryOperandEPKN4llvm12MachineInstrEjjPKcRNS1_11raw_ostreamE+0x2b): undefined reference to `llvm::Nios2InstPrinter::getRegisterName(unsigned int)'
lib/Target/Nios2/CMakeFiles/LLVMNios2CodeGen.dir/Nios2AsmPrinter.cpp.o: In function `(anonymous namespace)::Nios2AsmPrinter::PrintAsmOperand(llvm::MachineInstr const*, unsigned int, unsigned int, char const*, llvm::raw_ostream&)':
Nios2AsmPrinter.cpp:(.text._ZN12_GLOBAL__N_115Nios2AsmPrinter15PrintAsmOperandEPKN4llvm12MachineInstrEjjPKcRNS1_11raw_ostreamE+0x97): undefined reference to `llvm::Nios2InstPrinter::getRegisterName(unsigned int)'
collect2: error: ld returned 1 exit status
Differential Revision: https://reviews.llvm.org/D47810
llvm-svn: 347387
LVI was symbolically executing binary operators only when the RHS was
constant, missing the case where we have a ConstantRange for the RHS,
but not an actual constant. Tested using check-all and by
bootstrapping. Compile time is not impacted measurably.
Differential Revision: https://reviews.llvm.org/D19859
llvm-svn: 347379
We have efficient codegen on P9 for lowering bswap that involves moving
the value into a vector reg and moving it back. However, the check under
which we custom lowered it did not adequately reflect the actual requirements.
It required only that the subtarget be an implementation of ISA 3.0 since all
compliant implementations have to provide the vector instructions.
However, the kernel builds have a valid use case for -mno-altivec -mcpu=pwr9
(i.e. don't emit vector code, don't have to save vector regs for context
switch). So we should require the correct features for this lowering.
Fixes https://bugs.llvm.org/show_bug.cgi?id=39334
llvm-svn: 347376
These are AVX2 instructions, but have been incorrectly marked in tablegen for a while. This wasn't a problem until r346784 switched the patterns to use target independent ISD opcodes. This made the patterns visible to fast isel.
Fixes PR39733
llvm-svn: 347375
We can't guarantee that demanded bits passing through the vector shuffle won't cause the AND in front of this to be removed. This would prevent the PACKUS from being matched during shuffle lowering.
Unfortunately, this adds a packuswb to one of the vector-reduce-mul.ll tests since we were removing the shuffle via SimplifyDemandedVectorElts. We appear to have similar issues with vpmovwb on the same test case on other targets.
llvm-svn: 347361
This is another step in vector narrowing - a follow-up to D53784
(and hoping to eventually squash potential regressions seen in
D51553).
The x86 test diffs are wins, but the AArch64 diff is probably not.
That problem already exists independent of this patch (see PR39722), but it
went unnoticed in the previous patch because there were no regression tests
that showed the possibility.
The x86 diff in i64-mem-copy.ll is close. Given the frequency throttling
concerns with using wider vector ops, an extra extract to reduce vector
width is the right trade-off at this level of codegen.
Differential Revision: https://reviews.llvm.org/D54392
llvm-svn: 347356
When you have a member function with a ref-qualifier, for example:
struct Foo {
void Func() &;
void Func2() &&;
};
clang-cl was not emitting this information. Doing so is a bit
awkward, because it's not a property of the LF_MFUNCTION type, which
is what you'd expect. Instead, it's a property of the this pointer
which is actually an LF_POINTER. This record has an attributes
bitmask on it, and our handling of this bitmask was all wrong. We
had some parts of the bitmask defined incorrectly, but importantly
for this bug, we didn't know about these extra 2 bits that represent
the ref qualifier at all.
Differential Revision: https://reviews.llvm.org/D54667
llvm-svn: 347354
This is for compatibility with MSVC, which also marks this pointers
as being const-qualified.
Fixes llvm.org/pr36526
Differential Revision: https://reviews.llvm.org/D54736
llvm-svn: 347353
Previously we emitted to separate shuffles, one for unpcklbw and one for unpcklwd. Instead emit a single shuffle equivalent to both of the original shuffles. Shuffle lowering seems able to handle it. This avoids a bitcast between the two shuffles which seems helpful to DAG combine.
Remove the custom type legalization for v8i8->v8i32. I had put that in to avoid some almost duplicate punpcklbw instructions I was seeing, but this lowering change seems to fix that. It also fixes some duplicate shuffles seen in vector-sext.ll
llvm-svn: 347348
Rather than assuming that `tempRet0` exists in linear memory only assume
the getter/setter functions exist. This avoids conflicting with
binaryen which declares a wasm global for this purpose and defines it's
own getter and setter for that.
The other advantage of doing things this way is that it leaving
it up to the linker/finalizer to decide how to actually store this
temporary. As it happens binaryen uses a wasm global which is more
appropriate since it is thread safe.
This also allows us to change the way this is stored in the future
(memory, TLS memory, wasm global) without modifying LLVM.
This is part of a 4 part change:
LLVM: https://reviews.llvm.org/D53240
fastcomp: https://github.com/kripken/emscripten-fastcomp/pull/237
emscripten: https://github.com/kripken/emscripten/pull/7358
binaryen: https://github.com/WebAssembly/binaryen/pull/1709
Differential Revision: https://reviews.llvm.org/D53240
llvm-svn: 347340
Krzysztof Parzyszek