Since the clangd-dev is intended to be the place for clangd-related
discussions, we should point new users to this mailing list while
probably mentioning cfe-dev, too.
Reviewed by: ioeric
Differential Revision: https://reviews.llvm.org/D51293
llvm-svn: 340749
Summary:
Now that we moved the BuiltinContext and SelectorTable to the
CompilerInstance, we can also get rid of manually creating our
own ASTContext, but just use the one from the CompilerInstance
(which will be created with the same settings).
Reviewers: vsk, aprantl, davide
Reviewed By: davide
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D51253
llvm-svn: 340748
Summary:
LLDB currently only checks the output terminal for color support by looking
at the `TERM` environment variable and comparing it to `"dumb"`. This causes that
when running LLDB on a CI node, the syntax highlighter will not be deactivated by
LLDB and the output log is filled with color codes (unless the terminal emulator
actually exposes itself as dumb).
This patch now relies on the LLVM code for detecting color support which is more
reliable. We now also correctly actually initialize the `m_supports_colors` variable in `File`.
`m_supports_colors` was so far uninitialized, but the code path that uses `m_supports_colors`
was also dead so the sanitizers didn't sound an alarm.
The old check that compares `TERM` is not removed by this patch as the new LLVM code
doesn't seem to handle this case (and it's a good thing to check for "dumb" terminals).
Reviewers: aprantl, javed.absar
Reviewed By: aprantl
Subscribers: kristof.beyls, abidh, lldb-commits
Differential Revision: https://reviews.llvm.org/D51243
llvm-svn: 340747
Before this patch, the SchedulerStatistics only printed the maximum number of
buffer entries consumed in each scheduler's queue at a given point of the
simulation.
This patch restructures the reported table, and adds an extra field named
"Average number of used buffer entries" to it.
This patch also uses different colors to help identifying bottlenecks caused by
high scheduler's buffer pressure.
llvm-svn: 340746
This commit has caused failures in some internal benchmarks. Temporarily
reverting this patch until the issue can be diagnosed and fixed.
llvm-svn: 340740
Summary:
This commit adds the case of tail calling a sret function from a non-sret
function when both functions have the C calling convention.
llvm-svn: 340737
Summary: If an object file ends with a relocation that is smaller
than 4 bytes we will write outside the Data array and trigger an
"Invalid index" assertion.
Reviewers: jyknight, venkatra
Reviewed By: jyknight
Subscribers: fedor.sergeev, jrtc27, llvm-commits
Differential Revision: https://reviews.llvm.org/D50971
llvm-svn: 340736
Summary:
Remove unnecessary lines from `sibcall.ll` and rename labels according
to @RKSimon's recommendations in the D45653 conversation.
llvm-svn: 340735
The internal benchmark failure reported by Google was due to a missing
check for the result type for the sign-extend and shift DAG. This commit
adds the check and re-commits the patch.
llvm-svn: 340734
Summary: The GR740 provides an up cycle counter in the registers ASR22
and ASR23. As these registers can not be read together atomically we only
use the value of ASR23 for llvm.readcyclecounter(). The ASR23 register
holds the 32 LSBs of the up-counter.
Reviewers: jyknight, venkatra
Reviewed By: jyknight
Subscribers: jfb, fedor.sergeev, jrtc27, llvm-commits
Differential Revision: https://reviews.llvm.org/D48638
llvm-svn: 340733
Stop using `$$$` (empty) trigram and generating a posting list with all
items. Since TRUE iterator is already implemented and correctly inserted
when there are no real trigram posting lists, this is a valid
transformation.
Benchmarks show that this simple change allows ~30% speedup on dataset
of real completion queries.
Before
```
-------------------------------------------------------
Benchmark Time CPU Iterations
-------------------------------------------------------
DexAdHocQueries 5640321 ns 5640265 ns 120
DexRealQ 939835603 ns 939830296 ns 1
```
After
```
-------------------------------------------------------
Benchmark Time CPU Iterations
-------------------------------------------------------
DexAdHocQueries 3452014 ns 3451987 ns 203
DexRealQ 667455912 ns 667455750 ns 1
```
Reviewed by: ilya-biryukov
Differential Revision: https://reviews.llvm.org/D51287
llvm-svn: 340729
We have a class `ImplicitControlFlowTracking` which allows us to keep track of
instructions that can abnormally exit and answer queries like "whether or not
there is side-exiting instruction above this instruction in its block".
We may want to have the similar tracking for other types of "special" instructions,
for example instructions that write memory.
This patch separates ImplicitControlFlowTracking into two classes, isolating all
general logic not related to implicit control flow into its parent class. We can
later make another child of this class to keep track of instructions that write
memory.
The motivation for that is that we want to make these checks efficiently in the
patch https://reviews.llvm.org/D50891.
NOTE: The naming of the parent class is not super cool, but the other options we
have are hardly better. Please feel free to rename it as NFC if you think you've
found a more informative name for it.
Differential Revision: https://reviews.llvm.org/D50954
Reviewed By: fedor.sergeev
llvm-svn: 340728
If any of the bots complain about this, I'll just revert. This test case
is essentially trying to test the exact change made, but I think this
matches the intent of the patch in question.
llvm-svn: 340727
Normally, in order to reference exported data symbols from a different
DLL, the declarations need to have the dllimport attribute, in order to
use the __imp_<var> symbol (which contains an address to the actual
variable) instead of the variable itself directly. This isn't an issue
in the same way for functions, since any reference to the function without
the dllimport attribute will end up as a reference to a thunk which loads
the actual target function from the import address table (IAT).
GNU ld, in MinGW environments, supports automatically importing data
symbols from DLLs, even if the references didn't have the appropriate
dllimport attribute. Since the PE/COFF format doesn't support the kind
of relocations that this would require, the MinGW's CRT startup code
has an custom framework of their own for manually fixing the missing
relocations once module is loaded and the target addresses in the IAT
are known.
For this to work, the linker (originall in GNU ld) creates a list of
remaining references needing fixup, which the runtime processes on
startup before handing over control to user code.
While this feature is rather controversial, it's one of the main features
allowing unix style libraries to be used on windows without any extra
porting effort.
Some sort of automatic fixing of data imports is also necessary for the
itanium C++ ABI on windows (as clang implements it right now) for importing
vtable pointers in certain cases, see D43184 for some discussion on that.
The runtime pseudo relocation handler supports 8/16/32/64 bit addresses,
either PC relative references (like IMAGE_REL_*_REL32*) or absolute
references (IMAGE_REL_AMD64_ADDR32, IMAGE_REL_AMD64_ADDR32,
IMAGE_REL_I386_DIR32). On linking, the relocation is handled as a
relocation against the corresponding IAT slot. For the absolute references,
a normal base relocation is created, to update the embedded address
in case the image is loaded at a different address.
The list of runtime pseudo relocations contains the RVA of the
imported symbol (the IAT slot), the RVA of the location the relocation
should be applied to, and a size of the memory location. When the
relocations are fixed at runtime, the difference between the actual
IAT slot value and the IAT slot address is added to the reference,
doing the right thing for both absolute and relative references.
With this patch alone, things work fine for i386 binaries, and mostly
for x86_64 binaries, with feature parity with GNU ld. Despite this,
there are a few gotchas:
- References to data from within code works fine on both x86 architectures,
since their relocations consist of plain 32 or 64 bit absolute/relative
references. On ARM and AArch64, references to data doesn't consist of
a plain 32 or 64 bit embedded address or offset in the code. On ARMNT,
it's usually a MOVW+MOVT instruction pair represented by a
IMAGE_REL_ARM_MOV32T relocation, each instruction containing 16 bit of
the target address), on AArch64, it's usually an ADRP+ADD/LDR/STR
instruction pair with an even more complex encoding, storing a PC
relative address (with a range of +/- 4 GB). This could theoretically
be remedied by extending the runtime pseudo relocation handler with new
relocation types, to support these instruction encodings. This isn't an
issue for GCC/GNU ld since they don't support windows on ARMNT/AArch64.
- For x86_64, if references in code are encoded as 32 bit PC relative
offsets, the runtime relocation will fail if the target turns out to be
out of range for a 32 bit offset.
- Fixing up the relocations at runtime requires making sections writable
if necessary, with the VirtualProtect function. In Windows Store/UWP apps,
this function is forbidden.
These limitations are addressed by a few later patches in lld and
llvm.
Differential Revision: https://reviews.llvm.org/D50917
llvm-svn: 340726
The existing method is protected, and requires using DataRefImpl
and SmallVector.
Differential Revision: https://reviews.llvm.org/D50995
llvm-svn: 340725
Summary:
Currently bitcasting constants from f64 to v2i32 is done by storing the
value to the stack and then loading it again. This is not necessary, but
seems to happen because v2i32 is a valid type for Sparc V8. If it had not
been legal, we would have gotten help from the type legalizer.
This patch tries to do the same work as the legalizer would have done by
bitcasting the floating point constant and splitting the value up into a
vector of two i32 values.
Reviewers: venkatra, jyknight
Reviewed By: jyknight
Subscribers: glaubitz, fedor.sergeev, jrtc27, llvm-commits
Differential Revision: https://reviews.llvm.org/D49219
llvm-svn: 340723
We cannot directy reuse the patterns of StPat because for some reason the store
DAG node and the atomic_store_nn DAG nodes put the ptr and the value in
different positions. Currently we attempt to store the address to an address
formed by the value.
Differential Revision: https://reviews.llvm.org/D51217
llvm-svn: 340722
vXi32 support was recently moved from LowerMUL_LOHI to LowerMULH.
This commit shares the getOperand calls, switches both to use common IsSigned flag, and hoists the NumElems/NumElts variable.
llvm-svn: 340720
This also adds a second intrinsic name for the 16-bit mask versions.
These intrinsics match gcc and icc. They just aren't published in the Intel Intrinsics Guide so I only recently found they existed.
llvm-svn: 340719
For this relocation, which applies to two consecutive instructions,
it's plausible that the second instruction might not actually be
the right one.
Differential Revision: https://reviews.llvm.org/D50998
llvm-svn: 340715
This is a pretty large refactor / re-write of the Microsoft
demangler. The previous one was a little hackish because it
evolved as I was learning about all the various edge cases,
exceptions, etc. It didn't have a proper AST and so there was
lots of custom handling of things that should have been much
more clean.
Taking what was learned from that experience, it's now
re-written with a completely redesigned and much more sensible
AST. It's probably still not perfect, but at least it's
comprehensible now to someone else who wants to come along
and make some modifications or read the code.
Incidentally, this fixed a couple of bugs, so I've enabled
the tests which now pass.
llvm-svn: 340710
Summary: This was inheriting the cost from the AVX table, but should be legal under AVX512.
Reviewers: RKSimon
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D51267
llvm-svn: 340708
Summary:
Previously most CPUs inherited cmov support through Feature64Bit(or FeatureCMPXCHG16HB implying Feature64Bit) or FeatureSSE1.
This has the surprising side effect that -mattr=-cmov causes an assert to fire in 64-bit mode because it clears the Feature64Bit. Or in 32-bit mode, -mattr=-cmov disables any sse/avx features which seems surprising.
This patch removes the implication and instead updates hasCMOV in X86Subtarget to check SSE1 or is64Bit in addition to the regular cmov flag. This should keep most things working the way they did before. I don't believe there is a way to specific "-cmov" directly from clang so this should only effect our lower level tools.
This does stop -mattr=cx16(cmpxchg16b) from implying cmov is enabled via the 64bit flag as you can see from one of the changed tests. But that was a 32-bit test so I don't know why it enabled cx16 anyway.
For the other test I had to add -sse to override the new sse check in hasCMOV.
Reviewers: RKSimon, DavidKreitzer, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits, jfb
Differential Revision: https://reviews.llvm.org/D51228
llvm-svn: 340707
Summary: This matches gcc and one cpuid dump I found online. Given that these are considered 7th generation x86 CPU it seems likely they support cmov since cmov was added by Intel in their 6th generation.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D51264
llvm-svn: 340706
I noticed this along with the patterns in D51125, but when the index is variable,
we don't convert insertelement into a build_vector.
For x86, that means these get expanded at legalization time into the loading/spilling
code that we see in the tests. I think it's always better to avoid going to memory on
these, and we get the optimal 'broadcast' if it's available.
I suspect other targets may want to look at enabling the hook. AArch64 and AMDGPU have
regression tests that would be affected (although I did not check what would happen in
those cases). In the most basic cases shown here, AArch64 would probably do much
better with a splat.
Differential Revision: https://reviews.llvm.org/D51186
llvm-svn: 340705
Private symbols are not visible outside the object file, and so not defined by
the object file from ORC's perspective.
No test case yet. Ideally this would be a unit test parsing a checked-in binary,
but I am not aware of any way to reference the LLVM source root from a unit
test.
llvm-svn: 340703
vectors, and move this test code into an anonymous namespace.
Hoping that this will avoid hitting an MSVC bug that causes it to crash
and burn pretty spectacularly. Also, this degree of clever use of
initializer lists seems somewhat questionable in general. ;]
llvm-svn: 340702
This is a bit awkward in a handful of places where we didn't even have
an instruction and now we have to see if we can build one. But on the
whole, this seems like a win and at worst a reasonable cost for removing
`TerminatorInst`.
All of this is part of the removal of `TerminatorInst` from the
`Instruction` type hierarchy.
llvm-svn: 340701
agree with MSVC.
There isn't actually a need for specialization here as we can write the
code generically and just have a test that will fold away as a constant.
llvm-svn: 340700
`isExceptionalTermiantor` and implement it for opcodes as well following
the common pattern in `Instruction`.
Part of removing `TerminatorInst` from the `Instruction` type hierarchy
to make it easier to share logic and interfaces between instructions
that are both terminators and not terminators.
llvm-svn: 340699
The core get and set routines move to the `Instruction` class. These
routines are only valid to call on instructions which are terminators.
The iterator and *generic* range based access move to `CFG.h` where all
the other generic successor and predecessor access lives. While moving
the iterator here, simplify it using the iterator utilities LLVM
provides and updates coding style as much as reasonable. The APIs remain
pointer-heavy when they could better use references, and retain the odd
behavior of `operator*` and `operator->` that is common in LLVM
iterators. Adjusting this API, if desired, should be a follow-up step.
Non-generic range iteration is added for the two instructions where
there is an especially easy mechanism and where there was code
attempting to use the range accessor from a specific subclass:
`indirectbr` and `br`. In both cases, the successors are contiguous
operands and can be easily iterated via the operand list.
This is the first major patch in removing the `TerminatorInst` type from
the IR's instruction type hierarchy. This change was discussed in an RFC
here and was pretty clearly positive:
http://lists.llvm.org/pipermail/llvm-dev/2018-May/123407.html
There will be a series of much more mechanical changes following this
one to complete this move.
Differential Revision: https://reviews.llvm.org/D47467
llvm-svn: 340698
Legalize G_ADD for types smaller than i32.
LegalizationArtifactCombiner replaces extend instructions with appropriate
bitwise instructions.
Patch by Petar Avramovic.
Differential Revision: https://reviews.llvm.org/D51213
llvm-svn: 340697
Kirill Bobyrev