We have a transform in the opposite direction only for the x86 MMX type,
Other types are not handled either way before this patch.
The motivating case from PR45748:
https://bugs.llvm.org/show_bug.cgi?id=45748
...is the last test diff. In that example, we are triggering an existing
bitcast transform, so we reduce the number of casts, and that should give
us the ideal x86 codegen.
Differential Revision: https://reviews.llvm.org/D79171
Summary:
This patch fix the following issues with visitExtractElementInst:
1. Restrict VectorUtils::findScalarElement to fixed-length vector.
For scalable type, the number of elements in shuffle mask is
unknown at compile-time.
2. Fix out-of-range calculation for fixed-length vector.
3. Skip scalable type when analysis rely on fixed number of elements.
4. Add unit tests to check functionality of extractelement for scalable type.
Reviewers: sdesmalen, efriedma, spatel, nikic
Reviewed By: efriedma
Subscribers: tschuett, hiraditya, rkruppe, psnobl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78267
Summary:
This patch fixes the following issues in visitInsertElementInst:
1. Bail out for scalable type when analysis requires fixed size number of vector elements.
2. Use cast<FixedVectorType> to get vector number of elements. This ensure assertion
on scalable vector type.
3. For scalable type, avoid folding a chain of insertelement into splat:
insertelt(insertelt(insertelt(insertelt X, %k, 0), %k, 1), %k, 2) ...
->
shufflevector(insertelt(X, %k, 0), undef, zero)
The length of scalable vector is unknown at compile-time, therefore we don't know if
given insertelement sequence is valid for splat.
Reviewers: sdesmalen, efriedma, spatel, nikic
Reviewed By: sdesmalen, efriedma
Subscribers: tschuett, hiraditya, rkruppe, psnobl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78895
As proposed in D77881, we'll have the related widening operation,
so this name becomes too vague.
While here, change the function signature to take an 'int' rather
than 'size_t' for the scaling factor, add an assert for overflow of
32-bits, and improve the documentation comments.
Summary:
Remove usages of asserting vector getters in Type in preparation for the
VectorType refactor. The existence of these functions complicates the
refactor while adding little value.
Reviewers: sdesmalen, rriddle, efriedma
Reviewed By: sdesmalen
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77263
As discussed in D76983, that patch can turn a chain of insert/extract
with scalar trunc ops into bitcast+extract and existing instcombine
vector transforms end up creating a shuffle out of that (see the
PhaseOrdering test for an example). Currently, that process requires
at least this sequence: -instcombine -early-cse -instcombine.
Before D76983, the sequence of insert/extract would reach the SLP
vectorizer and become a vector trunc there.
Based on a small sampling of public targets/types, converting the
shuffle to a trunc is better for codegen in most cases (and a
regression of that form is the reason this was noticed). The trunc is
clearly better for IR-level analysis as well.
This means that we can induce "spontaneous vectorization" without
invoking any explicit vectorizer passes (at least a vector cast op
may be created out of scalar casts), but that seems to be the right
choice given that we started with a chain of insert/extract, and the
backend would expand back to that chain if a target does not support
the op.
Differential Revision: https://reviews.llvm.org/D77299
Instead, represent the mask as out-of-line data in the instruction. This
should be more efficient in the places that currently use
getShuffleVector(), and paves the way for further changes to add new
shuffles for scalable vectors.
This doesn't change the syntax in textual IR. And I don't currently plan
to change the bitcode encoding in this patch, although we'll probably
need to do something once we extend shufflevector for scalable types.
I expect that once this is finished, we can then replace the raw "mask"
with something more appropriate for scalable vectors. Not sure exactly
what this looks like at the moment, but there are a few different ways
we could handle it. Maybe we could try to describe specific shuffles.
Or maybe we could define it in terms of a function to convert a fixed-length
array into an appropriate scalable vector, using a "step", or something
like that.
Differential Revision: https://reviews.llvm.org/D72467
Summary: Rewrite the fsub-0.0 idiom to fneg and always emit fneg for fp
negation. This also extends the scalarization cost in instcombine for unary
operators to result in the same IR rewrites for fneg as for the idiom.
Reviewed By: cameron.mcinally
Differential Revision: https://reviews.llvm.org/D75467
This is a followup to D73803, which uses the replaceOperand()
helper in more places.
This should be NFC apart from changes to worklist order.
Differential Revision: https://reviews.llvm.org/D73919
As discussed on D73919, this replaces a few cases where we were
modifying multiple operands of instructions in-place with the
creation of a new instruction, which we generally prefer nowadays.
This tends to be more readable and less prone to worklist management
bugs.
Test changes are only superficial (instruction naming and order).
Adds a replaceOperand() helper, which is like Instruction.setOperand()
but adds the old operand to the worklist. This reduces the amount of
missing or incorrect worklist management.
This only applies the helper to a relatively small subset of
setOperand() calls in InstCombine, namely those of the pattern
`I.setOperand(); return &I;`, where it is most obviously applicable.
Differential Revision: https://reviews.llvm.org/D73803
This renames Worklist.AddDeferred() to Worklist.add() and
Worklist.Add() to Worklist.push(). The intention here is that
Worklist.add() should be the go-to method for explicit worklist
management, while the raw Worklist.push() is mostly for
InstCombine internals. I will then migrate uses of Worklist.push()
to Worklist.add() in followup changes.
As suggested by spatel on D73411 I'm also changing the remaining
method names to lowercase first character, in line with current
coding standards.
Differential Revision: https://reviews.llvm.org/D73745
This pattern is noted as a regression from:
D70246
...where we removed an over-aggressive shuffle simplification.
SimplifyDemandedVectorElts fails to catch this case when the insert has multiple uses,
so I'm proposing to pattern match the minimal sequence directly. This fold does not
conflict with any of our current shuffle undef/poison semantics.
Differential Revision: https://reviews.llvm.org/D71220
This reverts these two commits
[InstCombine] Turn (extractelement <1 x i64/double> (bitcast (x86_mmx))) into a single bitcast from x86_mmx to i64/double.
[InstCombine] Don't transform bitcasts between x86_mmx and v1i64 into insertelement/extractelement
We're seeing at least one internal test failure related to a
bitcast that was previously before an inline assembly block
containing emms being placed after it. This leads to the mmx
state ending up not empty after the emms. IR has no way to
make any specific guarantees about this. Reverting these patches
to get back to previous behavior which at least worked for this
test.
This is NFC-intended because SimplifyDemandedVectorElts() does the same
transform later. As discussed in D70641, we may want to change that
behavior, so we need to isolate where it happens.
The pattern in question is currently not possible because we
aggressively (wrongly) transform mask elements to undef values
if they choose from an undef operand. That, however, would
change if we tighten our semantics for shuffles as discussed
in D70641. Adding this check gives us the flexibility to make
that change with minimal overhead for current definitions.
And simultaneously enhance SimplifyDemandedVectorElts() to rcognize that
pattern. That preserves some of the old optimizations in IR.
Given a shuffle that includes undef elements in an otherwise identity mask like:
define <4 x float> @shuffle(<4 x float> %arg) {
%shuf = shufflevector <4 x float> %arg, <4 x float> undef, <4 x i32> <i32 undef, i32 1, i32 2, i32 3>
ret <4 x float> %shuf
}
We were simplifying that to the input operand.
But as discussed in PR43958:
https://bugs.llvm.org/show_bug.cgi?id=43958
...that means that per-vector-element poison that would be stopped by the shuffle can now
leak to the result.
Also note that we still have (and there are tests for) the same transform with no undef
elements in the mask (a fully-defined identity mask). I don't think there's any
controversy about that case - it's a valid transform under any interpretation of
shufflevector/undef/poison.
Looking at a few of the diffs into codegen, I don't see any difference in final asm. So
depending on your perspective, that's good (no real loss of optimization power) or bad
(poison exists in the DAG, so we only partially fixed the bug).
Differential Revision: https://reviews.llvm.org/D70246
The _m64 type is represented in IR as <1 x i64>. The x86-64 ABI
on Linux passes <1 x i64> as a double. MMX intrinsics use x86_mmx
type in IR.These things result in a lot of bitcasts in mmx code.
There's another instcombine that tries to turn bitcast <1 x i64>
to double into extractelement and a bitcast.
The combine here tries to reverse this extractelement conversion
if we see an mmx type.
Summary:
Allow for ignoring the check for a single use in SimplifyDemandedVectorElts
to be able to simplify operands if DemandedElts is known to contain
the union of elements used by all users.
It is a responsibility of a caller of SimplifyDemandedVectorElts to
supply correct DemandedElts.
Simplify a series of extractelement instructions if only a subset of
elements is used.
Reviewers: reames, arsenm, majnemer, nhaehnle
Reviewed By: nhaehnle
Subscribers: wdng, jvesely, nhaehnle, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67345
llvm-svn: 375395
This is similar to the existing fold for splats added with:
rL365379
If we can adjust the shuffle mask to include another element
in an identity mask (if it changes vector length, that's an
extract/insert subvector operation in the backend), then that
can eliminate extractelement/insertelement pairs in IR.
All targets are expected to lower shuffles with identity masks
efficiently.
llvm-svn: 371340
Forming the canonical splat shuffle improves analysis and
may allow follow-on transforms (although some possibilities
are missing as shown in the test diffs).
The backend generically turns these patterns into build_vector,
so there should be no codegen regressions. All targets are
expected to be able to lower splats efficiently.
llvm-svn: 365379
We recognize a splat from element 0 in (VectorUtils) llvm::getSplatValue()
and also in ShuffleVectorInst::isZeroEltSplatMask(), so this converts
to that form for better matching.
The backend generically turns these patterns into build_vector,
so there should be no codegen difference.
llvm-svn: 365342
We allow forming a splat (broadcast) shuffle, but we were conservatively limiting
that to cases where all elements of the vector are specified. It should be safe
from a codegen perspective to allow undefined lanes of the vector because the
expansion of a splat shuffle would become the chain of inserts again.
Forming splat shuffles can reduce IR and help enable further IR transforms.
Motivating bugs:
https://bugs.llvm.org/show_bug.cgi?id=42174https://bugs.llvm.org/show_bug.cgi?id=16739
Differential Revision: https://reviews.llvm.org/D63848
llvm-svn: 365147
This was part of InstCombine, but it's better placed in
InstSimplify. InstCombine also had an unreachable but weaker
fold for insertelement with undef index, so that is deleted.
llvm-svn: 361559
This is reduced from a fuzzer test:
https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=14890
Usually, demanded elements should be able to simplify shuffle
mask elements that are pointing to undef elements of its source
operands, but that doesn't happen in the test case.
llvm-svn: 361533
This should be a valid exception to the general rule of not creating new shuffle masks in IR...
because we already do it. :)
Also, DAG combining/legalization will undo this by widening the shuffle back out if needed.
Explanation for how we already do this: SLP or vector source can create chains of insert/extract
as shown in 1 of the examples from PR16739:
https://godbolt.org/z/NlK7rAhttps://bugs.llvm.org/show_bug.cgi?id=16739
And we expect instcombine or DAGCombine to clean that up by creating relatively simple shuffles.
Differential Revision: https://reviews.llvm.org/D62024
llvm-svn: 361338
Christopher Tetreault