This reverts commit ab4756338c.
Breaks some cases, including this:
namespace {
template <typename> struct a {};
} // namespace
class c {
c();
};
class b {
b();
a<c> ax;
};
b::b() {}
c::c() {}
By producing a reference to a type unit for "c" but not producing the type unit.
In certain circumstances with things like autogenerated code and asan, you
can end up with thousands of Values live at the same time, causing a large
working set and a lot of information spilled to the stack. Unfortunately
InstrRefBasedLDV doesn't cope well with this and consumes a lot of memory
when there are many many stack slots. See the reproducer in D116821.
It seems very unlikely that a developer would be able to reason about
hundreds of live named local variables at the same time, so a huge working
set and many stack slots is an indicator that we're likely analysing
autogenerated or instrumented code. In those cases: gracefully degrade by
setting an upper bound on the amount of stack slots to track. This limits
peak memory consumption, at the cost of dropping some variable locations,
but in a rare scenario where it's unlikely someone is actually going to
use them.
In terms of the patch, this adds a cl::opt for max number of stack slots to
track, and has the stack-slot-numbering code optionally return None. That
then filters through a number of code paths, which can then chose to not
track a spill / restore if it touches an untracked spill slot. The added
test checks that we drop variable locations that are on the stack, if we
set the limit to zero.
Differential Revision: https://reviews.llvm.org/D118601
These test cases all rely on a default target being specified. Adding
the requirement gets the tests properly skipped when
LLVM_DEFAULT_TARGET_TRIPLE is unset.
DWARF64 was implemented at version 3, so if a DWARF version less than 3 is specified, DWARF64 does not get selected. Since XCOFF64 requires DWARF64, the modified tests fail on 64-bit AIX. This patch bumps these tests to dwarf version 3 to maintain test coverage on 64-bit AIX.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D114110
If we only assign a variable value a single time, we can take a short-cut
when computing its location: the variable value is only valid up to the
dominance frontier of where the assignemnt happens. Past that point, there
are other predecessors from where the variable has no value, meaning the
variable has no location past that point.
This patch recognises this scenario, and avoids expensive SSA computation,
to improve compile-time performance.
Differential Revision: https://reviews.llvm.org/D117877
Shiny new DBG_PHI instruction usually have physical registers as operands
-- however, the machine verifier checks to see whether they're live, and
occasionally this fails. There's a filter for DBG_VALUE instructions to not
get verified in this way: expand it to exempt all debug instructions from
liveness checking, which means DBG_PHIs get treated like DBG_VALUEs.
This also future proofs against us adding new debug instructions.
Differential Revision: https://reviews.llvm.org/D117891
By reordering the objects on the stack frame after looking at the users, a
better utilization of displacement operands will result. This means less
needed Load Address instructions for the accessing of these objects.
This is important for very large functions where otherwise small changes
could cause a lot more/less accesses go out of range.
Note: this is not yet enabled for SystemZXPLINKFrameLowering, but should be.
Review: Ulrich Weigand
Differential Revision: https://reviews.llvm.org/D115690
A shift-left > 63 triggers a UBSAN failure. This patch kicks the can
down the road (to the consumer) by emitting a more compact
representation of the shift computation in DWARF expressions.
Relanding (I accidentally pushed an earlier version of the patch previously).
Differential Revision: https://reviews.llvm.org/D118183
A shift-left > 63 triggers a UBSAN failure. This patch kicks the can
down the road (to the consumer) by emitting a more compact
representation of the shift computation in DWARF expressions.
Differential Revision: https://reviews.llvm.org/D118183
DIStringType is used to encode the debug info of a character object
in Fortran. A Fortran deferred-length character object is typically
implemented as a pair of the following two pieces of info: An address
of the raw storage of the characters, and the length of the object.
The stringLocationExp field contains the DIExpression to get to the
raw storage.
This patch also enables the emission of DW_AT_data_location attribute
in a DW_TAG_string_type debug info entry based on stringLocationExp
in DIStringType.
A test is also added to ensure that the bitcode reader is backward
compatible with the old DIStringType format.
Differential Revision: https://reviews.llvm.org/D117586
A shift-left > 63 triggers a UBSAN failure. This patch kicks the can
down the road (to the consumer) by emitting a more compact
representation of the shift computation in DWARF expressions.
Differential Revision: https://reviews.llvm.org/D118183
Over in the comments for D116821, some use-cases have cropped up where
there's a substantial increase in memory usage. A quick inspection
shows that a) it's a lot of memory and b) there are several things to
be done to reduce it. Reverting (via disabling this feature by default)
to avoid bothering people in the meantime.
LLVM DebugInfo CodeGen synthesizes type declarations in type units when
referencing types that are not in type units. When those synthesized
types are templates and simplified template names (or mangled simplified
template names) are in use, the template arguments must be attached to
those declarations.
A deeper fix (with a CU or DICompositeType flag) that would also support
other uses of clang's -debug-forward-template-args (such as Sony's
platform) could/should be implemented to fix this more broadly.
Doing this causes a declaration of the internal linkage (anonymous
namespace) type to be emitted in the type unit, which would then be
ambiguous as to which internal linkage definition it refers to (since
the name is only valid internally).
It's possible these internal linkage types could be resolved relative to
the unit the TU is referred to from - but that doesn't seem ideal, and
there's no reason to put the type in a type unit since it can only be
defined in one CU anyway (since otherwise it'd be an ODR violation) & so
avoiding the type unit should be a smaller DWARF encoding anyway.
This also addresses an issue with Simplified Template Names where the
template parameter could not be rebuilt from the declaration emitted
into the TU (specifically for an enum non-type template parameter, where
looking up the enumerators is necessary to rebuild the full template
name)
Fix PR53163 by rounding the byte size of DW_TAG_base_type types up. Without
this fix we risk emitting types with a truncated size (including rounding
less-than-byte-sized types' sizes down to zero).
Reviewed By: probinson
Differential Revision: https://reviews.llvm.org/D117124
This patch adds support for the MSVC /HOTPATCH flag: https://docs.microsoft.com/sv-se/cpp/build/reference/hotpatch-create-hotpatchable-image?view=msvc-170&viewFallbackFrom=vs-2019
The flag is translated to a new -fms-hotpatch flag, which in turn adds a 'patchable-function' attribute for each function in the TU. This is then picked up by the PatchableFunction pass which would generate a TargetOpcode::PATCHABLE_OP of minsize = 2 (which means the target instruction must resolve to at least two bytes). TargetOpcode::PATCHABLE_OP is only implemented for x86/x64. When targetting ARM/ARM64, /HOTPATCH isn't required (instructions are always 2/4 bytes and suitable for hotpatching).
Additionally, when using /Z7, we generate a 'hot patchable' flag in the CodeView debug stream, in the S_COMPILE3 record. This flag is then picked up by LLD (or link.exe) and is used in conjunction with the linker /FUNCTIONPADMIN flag to generate extra space before each function, to accommodate for live patching long jumps. Please see: d703b92296/lld/COFF/Writer.cpp (L1298)
The outcome is that we can finally use Live++ or Recode along with clang-cl.
NOTE: It seems that MSVC cl.exe always enables /HOTPATCH on x64 by default, although if we did the same I thought we might generate sub-optimal code (if this flag was active by default). Additionally, MSVC always generates a .debug$S section and a S_COMPILE3 record, which Clang doesn't do without /Z7. Therefore, the following MSVC command-line "cl /c file.cpp" would have to be written with Clang such as "clang-cl /c file.cpp /HOTPATCH /Z7" in order to obtain the same result.
Depends on D43002, D80833 and D81301 for the full feature.
Differential Revision: https://reviews.llvm.org/D116511
This patch writes the full -cc1 command into the resulting .OBJ, like MSVC does. This allows for external tools (Recode, Live++) to rebuild a source file without any external dependency but the .OBJ itself (other than the compiler) and without knowledge of the build system.
The LF_BUILDINFO record stores a full path to the compiler, the PWD (CWD at program startup), a relative or absolute path to the source, and the full CC1 command line. The stored command line is self-standing (does not depend on the environment). In the same way, MSVC doesn't exactly store the provided command-line, but an expanded version (a somehow equivalent of CC1) which is also self-standing.
For more information see PR36198 and D43002.
Differential Revision: https://reviews.llvm.org/D80833
This prevents crashes in the OpenMP offload pipeline as not everything
is properly annotated with debug information, e.g., the runtimes we link
in. While we might want to have them annotated, it seems to be generally
useful to gracefully handle missing debug info rather than crashing.
TODO: A test is missing and can hopefully be distilled prior to landing.
This fixes#51079.
Differential Revision: https://reviews.llvm.org/D116959
I based this off of the API already create for llvm.dbg.value since both
intrinsics have the same arguments at the API level.
I added some tests exercising the API a little as well as an additional small
test that shows how one can use llvm.dbg.addr to limit the PC range where an
address value is available in the debugger. This is done by calling
llvm.dbg.value with undef and the same metadata info as one used to create the
llvm.dbg.addr.
rdar://83957028
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D117442
Commit 2bddab25db removed a piece of code from
DwarfDebug::emitDebugLocEntry that according to code comments
"Make sure comments stay aligned".
This patch restores that piece of code, together with the addition
of some extra checks in an existing lit test to work as a regression
test. Without this patch we incorrectly get
.byte 159 # 0
instead of
.byte 159 # DW_OP_stack_value
Differential Revision: https://reviews.llvm.org/D117441
Currently global SRA uses the GEP structure to determine how to
split the global. This patch instead analyses the loads and stores
that are performed on the global, and collects which types are used
at which offset, and then splits the global according to those.
This is both more general, and works fine with opaque pointers.
This is also closer to how ordinary SROA is performed.
Differential Revision: https://reviews.llvm.org/D117223
Important for DWARFv5 debug info which might contain type units in the
debug_info section, which made summarize-types fairly ineffective/lost
amongst the noise of CUs being dumped.
D111404 moved a 4/8 byte check assert into a block taken by 2-byte platforms.
Since these platforms do not take the branches where the pointer size is used,
sink the assert accordingly.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D116480
Instead of hashing DIE offsets, hash DIE references the same as they
would be when used outside of a loclist - that is, deep hash the type on
first use, and hash the numbering on subsequent uses.
This does produce different hashes for different type references, where
it did not before (because we were hashing zero all the time - so it
didn't matter what type was referenced, the hash would be identical).
This also allows us to enforce that the DIE offset (& size) is not
queried before it is used (which came up while investigating another bug
recently).
Causes invalid debug_gnu_pubnames (& I think non-gnu pubnames too) -
visible as 0 values for the offset in gnu pubnames. More details on the
original review in D115325.
This reverts commit 78d15a112c.
This reverts commit 54586582d3.
Try to revert D113741 once again.
This also reverts 0ac75e82ff (D114705)
as it causes LLDB's lldb-api.lang/cpp/nsimport.TestCppNsImport.py test
failure w/o D113741.
This reverts commit f9607d45f3.
Differential Revision: https://reviews.llvm.org/D116225
This patch causes invalid DWARF to be generated in some cases of LTO +
Split DWARF - follow-up on the original review thread (D113741) contains
further detail and test cases.
This reverts commit 75b622a795.
This reverts commit b6ccca217c.
This reverts commit 514d374419.
Reland integrates build fixes & further review suggestions.
Thanks to @zturner for the initial S_OBJNAME patch!
Differential Revision: https://reviews.llvm.org/D43002
Also revert all subsequent fixes:
- abd1cbf5e5 [Clang] Disable debug-info-objname.cpp test on Unix until I sort out the issue.
- 00ec441253 [Clang] debug-info-objname.cpp test: explictly encode a x86 target when using %clang_cl to avoid falling back to a native CPU triple.
- cd407f6e52 [Clang] Fix build by restricting debug-info-objname.cpp test to x86.
78d15a112c adds llvm/test/DebugInfo/Generic/type-units-maybe-unused-types.ll
Move the test into llvm/test/DebugInfo/X86 and add -mtriple=x86_64-linux-gnu
because not all platforms support type units.
Example of failing bot: type-units-maybe-unused-types.ll
Original review: https://reviews.llvm.org/D115325
Fixes https://llvm.org/PR51087: Extraneous enum record in DWARF with type units.
As explained in PR51087 we sometimes get skeleton DIEs for enums in a Dwarf
Compile Unit (CU) that are not referenced from any CU and are already described
by a type unit.
Types for enums are emitted whether used or not, all together before most types
in the CU. Mechanically, the extraneous CU records are generated because the
enum types are generated with a call to CU->getOrCreateTypeDIE. This function
will recursively get-or-create the parent DIE (in the CU) and the type unit for
each. We don't need the CU-side DIEs if the type units are sucesfully
emitted. Fix by only emitting the type units for enums if possible, falling back
to a call to getOrCreateTypeDIE if not. Do the same for retained types.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D115325
This patch updates the following test, which is falling to match ASM lines on AIX for two reasons:
- `.debug_info` is mapped to `.dwinfo`, so the test fails to match `debug_info` before `DW_TAG_label` occurs
- AIX uses inline strings, so `DW_AT_NAME` format is different and does not match `DW_AT_decl_file` in the next line.
Reviewed By: shchenz
Differential Revision: https://reviews.llvm.org/D115695
Summary:
This patch emits the DW_AT_accessibility attribute for
class/struct/union types in the LLVM part.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D115606
Avoid duplicating the string decoding - improve the error messages down
in form parsing (& produce an Expected<const char*> instead of
Optional<const char*> to communicate the extra error details)
Rust allows enums to be scopes, as shown by the previous change. Sadly,
D111770 disallowed enums-as-scopes in the LLVM Verifier, which means
that LLVM HEAD stopped working for Rust compiles. As a result, we back
out the verifier part of D111770 with a modification to the testcase so
we don't break this in the future.
The testcase is now actual IR from rustc at commit 8f8092cc3, which is
the nightly as of 2021-09-28. I would expect rustc 1.57 to produce
similar or identical IR if someone wants to reproduce this IR in the
future with minimal changes. A recipe for reproducing the IR using rustc
is included in the test file.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D115353
DwarfExpression::addUnsignedConstant(const APInt &Value) only supports
wider-than-64-bit values when it is used to emit a top-level DWARF
expression representing the location of a variable. Before this change,
it was possible to call addUnsignedConstant on >64 bit values within a
subexpression when substituting DW_OP_LLVM_arg values.
This can trigger an assertion failure (e.g. PR52584, PR52333) when it
happens in a fragment (DW_OP_LLVM_fragment) expression, as
addUnsignedConstant on >64 bit values splits the constant into separate
DW_OP_pieces, which modifies DwarfExpression::OffsetInBits.
This change papers over the assertion errors by bailing on overly wide
DW_OP_LLVM_arg values. A more comprehensive fix might be to be to split
wide values into pointer-sized fragments.
[0] https://github.com/llvm/llvm-project/blob/e71fa03/llvm/lib/CodeGen/AsmPrinter/DwarfCompileUnit.cpp#L799-L805
Patch by Ricky Zhou!
Differential Revision: https://reviews.llvm.org/D115343
The following tests are failing due to missing DWARF sections: `DwarfAccelNamesSection` and `DwarfAddrSection`. This patch sets these tests as `XFAIL` until the sections can be implemented for AIX.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D114681
This patch removes the white space and trailing bracket to make the checks consistent and verbose direct/indirect string agnostic for AIX compatibility.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D115287
This patch proposes to move emission of global variables, types,
imported entities, etc from DwarfDebug::beginModule() to DwarfDebug::endModule().
Effectively, this changes nothing but the order of debug entities which
will be as follows:
* subprograms (including related context, local variables/labels,
local imported entities; related types can be created as a part of
the emission of local entities of an abstract subprogram);
* global variables (including related context and types);
* retained types and enums;
* non-local-scoped imported entities;
* basic types;
* other types left (as a part of local variables attributes emission).
Note that the order of emitted compile units may also be changed as now we emit
units that contain subprograms first and then all other non-empty units.
The motivation behind this change is the following:
(1) DwarfDebug::beginModule() is run at the very beginning of backend's pipeline,
from this time IR can be significantly changed by target-specific passes.
If it happens for debug metadata of global entities, those changes will not
be reflected in the emitted DWARF.
(2) imported subprogram names should refer to an abstract subprogram if it exists,
but it isn't known in DwarfDebug::beginModule() (it's possible to make some
guesses based on location info, but it's not quite reliable);
(3) aforementioned entities if they are scoped within a bracketed block
(subject of D113741) couldn't be emitted in DwarfDebug::beginModule()
(they need parent emitted first). Another problem is if to try to gather
some information about local entities and defer their emission
(till subprogram's processing or DwarfDebug::endModule()) all the gathered
details might be irrelevant / invalid by the time the entities are being
emitted (because of (1)).
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D114705
This patch proposes to move emission of global variables, types,
imported entities, etc from DwarfDebug::beginModule() to DwarfDebug::endModule().
Effectively, this changes nothing but the order of debug entities which
will be as follows:
* subprograms (including related context, local variables/labels,
local imported entities; related types can be created as a part of
the emission of local entities of an abstract subprogram);
* global variables (including related context and types);
* retained types and enums;
* non-local-scoped imported entities;
* basic types;
* other types left (as a part of local variables attributes emission).
Note that the order of emitted compile units may also be changed as now we emit
units that contain subprograms first and then all other non-empty units.
The motivation behind this change is the following:
(1) DwarfDebug::beginModule() is run at the very beginning of backend's pipeline,
from this time IR can be significantly changed by target-specific passes.
If it happens for debug metadata of global entities, those changes will not
be reflected in the emitted DWARF.
(2) imported subprogram names should refer to an abstract subprogram if it exists,
but it isn't known in DwarfDebug::beginModule() (it's possible to make some
guesses based on location info, but it's not quite reliable);
(3) aforementioned entities if they are scoped within a bracketed block
(subject of D113741) couldn't be emitted in DwarfDebug::beginModule()
(they need parent emitted first). Another problem is if to try to gather
some information about local entities and defer their emission
(till subprogram's processing or DwarfDebug::endModule()) all the gathered
details might be irrelevant / invalid by the time the entities are being
emitted (because of (1)).
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D114705
Over in D114631 and [0] there's a plan for turning instruction referencing
on by default for x86. This patch adds / removes all the relevant bits of
code, with the aim that the final patch is extremely small, for an easy
revert. It should just be a condition in CommandFlags.cpp and removing the
XFail on instr-ref-flag.ll.
[0] https://lists.llvm.org/pipermail/llvm-dev/2021-November/153653.html
If we have a DYN_ALLOCA_* instruction, it will eventually be expanded to a
stack probe and subtract-from-SP. Add debug-info instrumentation to
X86FrameLowering::emitStackProbe so that it can redirect debug-info for the
DYN_ALLOCA to the lowered stack probe. In practice, this means putting an
instruction number label either the call instruction to _chkstk for win32,
or more commonly on the subtract from SP instruction. The two tests added
cover both of these cases.
Differential Revision: https://reviews.llvm.org/D114452
InstrRefBasedLDV used to crash on the added test -- the exit block is not
in scope for the variable being propagated, but is still considered because
it contains an assignment. The failure-mode was vlocJoin ignoring
assign-only blocks and not updating DIExpressions, but pickVPHILoc would
still find a variable location for it. That led to DBG_VALUEs created with
the wrong fragment information.
Fix this by removing a filter inherited from VarLocBasedLDV: vlocJoin will
now consider assign-only blocks and will update their expressions.
Differential Revision: https://reviews.llvm.org/D114727
Two "totally definitely the last ones" instruction referencing test
updates:
* fp-stack.ll: this test targets i686, and so it won't be getting
instruction referencing, or at least not right now,
* X86/live-debug-values.ll: instruction referencing will produce entry
values in this test, add check lines to account for this. It's not clear
what the test is supposed to be testing anyway, but the entry values
appear to be correct.
Differential Revision: https://reviews.llvm.org/D114626
If we have a variable where its fragments are split into overlapping
segments:
DBG_VALUE $ax, $noreg, !123, !DIExpression(DW_OP_LLVM_fragment_0, 16)
...
DBG_VALUE $eax, $noreg, !123, !DIExpression(DW_OP_LLVM_fragment_0, 32)
we should only propagate the most recently assigned fragment out of a
block. LiveDebugValues only deals with live-in variable locations, as
overlaps within blocks is DbgEntityHistoryCalculators domain.
InstrRefBasedLDV has kept the accumulateFragmentMap method from
VarLocBasedLDV, we just need it to recognise DBG_INSTR_REFs. Once it's
produced a mapping of variable / fragments to the overlapped variable /
fragments, VLocTracker uses it to identify when a debug instruction needs
to terminate the other parts it overlaps with. The test is updated for
some standard "InstrRef picks different registers" variation, and the
order of some unrelated DBG_VALUEs changes.
Differential Revision: https://reviews.llvm.org/D114603
These are some final test changes for using instruction referencing on X86:
* Most of these tests just have the flag switched so that they run with
instr-ref, and just work: these tests were fixed by earlier patches.
* There are some spurious differences in textual outputs,
* A few have different temporary labels in the output because more
MCSymbols are printed to the output.
Differential Revision: https://reviews.llvm.org/D114588
Usually dbg.declares get translated into either entries in an MF
side-table, or a DBG_VALUE on entry to the function with IsIndirect set
(including in instruction referencing mode). Much rarer is a dbg.declare
attached to a non-argument value, such as in the test added in this patch
where there's a variable-length-array. Such dbg.declares become SDDbgValue
nodes with InIndirect=true.
As it happens, we weren't correctly emitting DBG_INSTR_REFs with the
additional indirection. This patch adds the extra indirection, encoded as
adding an additional DW_OP_deref to the expression.
Differential Revision: https://reviews.llvm.org/D114440
InstrRefBasedLDV observes when variable locations are clobbered, scans what
values are available in the machine, and re-issues a DBG_VALUE for the
variable if it can find another location. Unfortunately, I hadn't joined up
the Indirectness flag, so if it did this to an Indirect Value, the
indirectness would be dropped.
Fix this, and add a test that if we clobber a variable value (on the stack
in this case), then the recovered variable location keeps the Indirect
flag.
Differential Revision: https://reviews.llvm.org/D114378
This patch contains a bunch of replacements of:
DBG_VALUE $somereg
with,
SOMEINST debug-instr-number1
DBG_INSTR_REF 1, 0, ...
It's mostly SelectionDAG tests that are making sure that the variable
location assignment is placed in the correct position in the instructions.
To avoid a loss in test coverage of SelectionDAG, which is used by a lot
of different backends, all these tests now have two modes and sets of RUN
lines, one for DBG_VALUE mode, the other for instruction referencing.
Differential Revision: https://reviews.llvm.org/D114258
This test uses split-dwarf feature, which is not currently supported on AIX. Set this test to `UNSUPPORTED` on AIX for now.
Reviewed By: shchenz
Differential Revision: https://reviews.llvm.org/D114567
In some scenarios, usually involving NRVO, we can issue indirect DBG_VALUEs
after SelectionDAG, even in instruction referencing mode (if the variable
is an argument). If the corresponding argument value is spilt to the stack,
then we have:
* Indirection from it being on the stack,
* Indirection from it being a dbg.declare or a dbg.addr.
However InstrRefBasedLDV only emits one level of indirection. This patch
adds the second, by adding an extra DW_OP_deref if necessary. The two
tests modified fail otherwise -- they feature some NRVO, and require two
levels of indirection to be correct.
Differential Revision: https://reviews.llvm.org/D114364
[NFC] As part of using inclusive language within the llvm project, this patch
replaces master with main in `dbg-call-site-spilled-arg.mir`.
Reviewed By: ZarkoCA
Differential Revision: https://reviews.llvm.org/D114097
DBG_INSTR_REF's and DBG_VALUE's can end up in blocks that aren't in the
lexical scope of their variable. It's arguable as to what we should do
about this, however VarLocBasedLDV permits such variable locations to be
propagated, so let's allow it in InstrRefBasedLDV.
It's necessary for the modified test to work.
Differential Revision: https://reviews.llvm.org/D114578
Introduced/discussed in https://reviews.llvm.org/D38719
The header validation logic was also explicitly building the DWARFUnits
to validate. But then other calls, like "Units.getUnitForOffset" creates
the DWARFUnits again in the DWARFContext proper - so, let's avoid
creating the DWARFUnits twice by walking the DWARFContext's units rather
than building a new list explicitly.
This does reduce some verifier power - it means that any unit with a
header parsing failure won't get further validation, whereas the
verifier-created units were getting some further validation despite
invalid headers. I don't think this is a great loss/seems "right" in
some ways to me that if the header's invalid we should stop there.
Exposing the raw DWARFUnitVectors from DWARFContext feels a bit
sub-optimal, but gave simple access to the getUnitForOffset to keep the
rest of the code fairly similar.
Almost all of the time, call instructions don't actually lead to SP being
different after they return. An exception is win32's _chkstk, which which
implements stack probes. We need to recognise that as modifying SP, so
that copies of the value are tracked as distinct vla pointers.
This patch adds a target frame-lowering hook to see whether stack probe
functions will modify the stack pointer, store that in an internal flag,
and if it's true then scan CALL instructions to see whether they're a
stack probe. If they are, recognise them as defining a new stack-pointer
value.
The added test exercises this behaviour: two calls to _chkstk should be
considered as producing two different values.
Differential Revision: https://reviews.llvm.org/D114443
Avoid un-necessarily recreating DBG_VALUEs on call instructions.
In LiveDebugvalues we choose to ignore any clobbers of SP by call
instructions, as they're irrelevant to our model of the machine. We
currently do so for tracking register values (MTracker); do the same for
tracking variable locations (TTracker).
Test modified to endure that a duplicate DBG_VALUE is not created after the
call in struction in this test.
Differential Revision: https://reviews.llvm.org/D114365
Enabling instruction referencing causes a few variable locations to switch
order -- i.e., they switch position in the output DWARF, or sometimes the
order of DBG_VALUEs. Update a few tests to reflect this.
Differential Revision: https://reviews.llvm.org/D114261
This patch updates location lists in various x86 tests to reflect what
instruction referencing produces. There are two flavours of change:
* Not following a register copy immediately, because instruction
referencing can make some slightly smarter decisions,
* Extended ranges, due to having additional information.
The register changes aren't that interesting, it's just a choice between
equally legitimate registers that instr-ref does differently. The extended
ranges are largely due to following stack restores better.
Differential Revision: https://reviews.llvm.org/D114362
In these test updates for instruction referencing, I've added specific
instr-ref RUN lines, and kep thte DBG_VALUE-based variable location check
lines too. This is because argument handling is really fiddly, and I figure
it's worth duplicating the testing to ensure it's definitely correct.
There's also dbg-value-superreg-copy2.mir, a dtest for where varaible
locations go when virtual registers are coalesced together. I don't think
there's an instruction referencing specific test for this, so have
duplicated that to for instruction referencing.
Differential Revision: https://reviews.llvm.org/D114262
It appears that we can emit all the instructions for a function, including
debug instructions, and then optimise some of the values out late.
Specifically, in the attached test case, an argument gets optimised out
after DBG_VALUE / DBG_INSTR_REFs are created. This confuses
MachineFunction::finalizeDebugInstrRefs, which expects to be able to find a
defining instruction, and crashes instead.
Fix this by identifying when there's no defining instruction, and
translating that instead into a DBG_VALUE $noreg.
Differential Revision: https://reviews.llvm.org/D114476
There are various tests that need to be adjusted to test the right
thing with instruction referencing -- usually because the internal
representation of variables is different, sometimes that location lists
change. This patch makes a bunch of tests explicitly not use
instruction referencing, so that a check-llvm test with instruction
referencing on for x86_64 doesn't fail. I'll then convert the tests
to have instr-ref CHECK lines, and similar.
Differential Revision: https://reviews.llvm.org/D113194
This test explicitly checks for .file directives, which is not currently supported on AIX. This patch sets this test to XFAIL on AIX for now.
Reviewed By: shchenz
Differential Revision: https://reviews.llvm.org/D113640
It appears REQUIRES are needed for tests added in D108261.
This was not caught in the pre-merge tests but in the post-commit tests.
he fix is to move the tests into the target sub-directories.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D113870
In a LTO build, the `end_sequence` in debug_line table for each compile unit (CU) points the end of text section which merged all CUs. The `end_sequence` needs to point to the end of each CU's range. This bug often causes invalid `debug_line` table in the final `.dSYM` binary for MachO after running `dsymutil` which tries to compensate an out-of-range address of `end_sequence`.
The fix is to sync the line table termination with the range operations that are already maintained in DwarfDebug. When CU or section changes, or nodebug functions appear or module is finished, the prior pending line table is terminated using the last range label. In the MC path where no range is tracked, the old logic is conservatively used to end the line table using the section end symbol.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D108261
This patch rewrites checks in a few debug info tests to avoid using
'CHECK-NOT: {{DW_TAG|NULL}}'. It proposes `--impicit-check-not=DW_TAG`
instead, as it makes the checks clearer, and easier to analyze and update.
Differential Revision: https://reviews.llvm.org/D113652
This is one of those wonderful "in theory X doesn't matter, but in practice is does" changes. In this particular case, we shift the IVs inserted by the runtime unroller to clamp iteration count of the loops* from decrementing to incrementing.
Why does this matter? A couple of reasons:
* SCEV doesn't have a native subtract node. Instead, all subtracts (A - B) are represented as A + -1 * B and drops any flags invalidated by such. As a result, SCEV is slightly less good at reasoning about edge cases involving decrementing addrecs than incrementing ones. (You can see this in the inferred flags in some of the test cases.)
* Other parts of the optimizer produce incrementing IVs, and they're common in idiomatic source language. We do have support for reversing IVs, but in general if we produce one of each, the pair will persist surprisingly far through the optimizer before being coalesced. (You can see this looking at nearby phis in the test cases.)
Note that if the hardware prefers decrementing (i.e. zero tested) loops, LSR should convert back immediately before codegen.
* Mostly irrelevant detail: The main loop of the prolog case is handled independently and will simple use the original IV with a changed start value. We could in theory use this scheme for all iteration clamping, but that's a larger and more invasive change.
The unrolling code was previously inserting new cloned blocks at the end of the function. The result of this with typical loop structures is that the new iterations are placed far from the initial iteration.
With unrolling, the general assumption is that the a) the loop is reasonable hot, and b) the first Count-1 copies of the loop are rarely (if ever) loop exiting. As such, placing Count-1 copies out of line is a fairly poor code placement choice. We'd much rather fall through into the hot (non-exiting) path. For code with branch profiles, later layout would fix this, but this may have a positive impact on non-PGO compiled code.
However, the real motivation for this change isn't performance. Its readability and human understanding. Having to jump around long distances in an IR file to trace an unrolled loop structure is error prone and tedious.
To be more consistent with other pass struct names.
There are still more passes that don't end with "Pass", but these are the important ones.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D112935
This fixes an assertion failure with -early-live-intervals when trying
to update the live intervals for a debug instruction, which don't even
have slot indexes.
Differential Revision: https://reviews.llvm.org/D113116
[NFC] As part of using inclusive language within the llvm project, this patch
replaces master with main in file/directory paths in llvm LIT tests.
Reviewed By: bjope
Differential Revision: https://reviews.llvm.org/D113190
Be more consistent in the naming convention for the various RET instructions to specify in terms of bitwidth.
Helps prevent future scheduler model mismatches like those that were only addressed in D44687.
Differential Revision: https://reviews.llvm.org/D113302
Matching a recent clang change I've made, now 'int[3]' is formatted
without the space between the type and array bound. This commit updates
libDebugInfoDWARF/llvm-dwarfdump to match that formatting.
This is to revert commit f95bd18b5f (Revert "[Attr] support
btf_type_tag attribute") plus a bug fix.
Previous change failed to handle cases like below:
$ cat reduced.c
void a(*);
void a() {}
$ clang -c reduced.c -O2 -g
In such cases, during clang IR generation, for function a(),
CGCodeGen has numParams = 1 for FunctionType. But for
FunctionTypeLoc we have FuncTypeLoc.NumParams = 0. By using
FunctionType.numParams as the bound to access FuncTypeLoc
params, a random crash is triggered. The bug fix is to
check against FuncTypeLoc.NumParams before accessing
FuncTypeLoc.getParam(Idx).
Differential Revision: https://reviews.llvm.org/D111199
This reverts commits 737e4216c5 and
ce7ac9e66a.
After those commits, the compiler can crash with a reduced
testcase like this:
$ cat reduced.c
void a(*);
void a() {}
$ clang -c reduced.c -O2 -g
Commit 737e4216c5 ("[Attr] support btf_type_tag attribute")
added btf_type_tag support in llvm. Buildbot reported a
failure with attr-btf_type_tag.ll.
; CHECK-NEXT: DW_AT_type (0x[[T1:[0-9]+]] "int ***")
<stdin>:15:2: note: possible intended match here
DW_AT_type (0x0000002f "int ***")
The pattern [0-9]+ is not enough to match 0000002f, we
need [0-9a-f]+. This patch fixed the issue.
Specifically in DWARFv5 the unit for the line table entry was correct
but the context was incorrect - leading to looking up .debug_line_str in
the dwp instead of the executable.
(perhaps we could/should remove the context pointer entirely, and rely
on the one in the unit... I might try that as a separate follow-up
commit)
This patch added clang codegen and llvm support
for btf_type_tag support. Currently, btf_type_tag
attribute info is preserved in DebugInfo IR only for
pointer types associated with typedef, global variable
and function declaration. Eventually, such information
is emitted to dwarf.
The following is an example:
$ cat test.c
#define __tag __attribute__((btf_type_tag("tag")))
int __tag *g;
$ clang -O2 -g -c test.c
$ llvm-dwarfdump --debug-info test.o
...
0x0000001e: DW_TAG_variable
DW_AT_name ("g")
DW_AT_type (0x00000033 "int *")
DW_AT_external (true)
DW_AT_decl_file ("/home/yhs/test.c")
DW_AT_decl_line (2)
DW_AT_location (DW_OP_addr 0x0)
0x00000033: DW_TAG_pointer_type
DW_AT_type (0x00000042 "int")
0x00000038: DW_TAG_LLVM_annotation
DW_AT_name ("btf_type_tag")
DW_AT_const_value ("tag")
0x00000041: NULL
0x00000042: DW_TAG_base_type
DW_AT_name ("int")
DW_AT_encoding (DW_ATE_signed)
DW_AT_byte_size (0x04)
0x00000049: NULL
Basically, a DW_TAG_LLVM_annotation tag will be inserted
under DW_TAG_pointer_type tag if that pointer has a btf_type_tag
associated with it.
Differential Revision: https://reviews.llvm.org/D111199
This patch removes the verbose option from tests that do not need it and simplifies the checks. For tests that do have the verbose option, the checks were standardized to be more readable and consistent.
Reviewed By: shchenz, dblaikie
Differential Revision: https://reviews.llvm.org/D112636
Functions in different sections (common in object files - inline
functions, -ffunction-sections, etc) can't overlap, so factor in the
section when diagnosing overlapping address ranges.
This removes a major false-positive when running llvm-dwarfdump on
unlinked code.
The modified tests were failing on AIX because DWARF on AIX uses inline strings by default, but the tests check for `DW_FORM_strp`.
This patch removes `DW_FORM_strp` so both forms will pass the check.
Reviewed By: shchenz, dblaikie
Differential Revision: https://reviews.llvm.org/D112286
AIX and z/OS lack Objective-C support, so mark these tests as unsupported for AIX and z/OS.
This patch follows the same reasoning as D109060.
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D112390
During register allocation, some instructions can have stack spills fused
into them. It means that when vregs are allocated on the stack we can
convert:
SETCCr %0
DBG_VALUE %0
to
SETCCm %stack.0
DBG_VALUE %stack.0
Unfortunately instruction referencing finds this harder: a store to the
stack doesn't have a specific operand number, therefore we don't substitute
the old operand for a new operand, and the location is dropped. This patch
implements a solution: just recognise the memory operand attached to an
instruction with a Special Number (TM), and record a substitution between
the old value and the new one.
This patch adds substitution code to InlineSpiller to record such fused
spills, and tracking in InstrRefBasedLDV to recognise such values, and
produce the value numbers for them. Everything to do with the movement of
stack-defined values is already handled in InstrRefBasedLDV.
Differential Revision: https://reviews.llvm.org/D111317
Sometimes we generate code that writes to a subregister, then spills /
restores a super-register to the stack, for example:
$eax = MOV32ri 0
MOV64mr $rsp, 1, $noreg, 16, $noreg, $rax
$rcx = MOV64rm $rsp, 1, $noreg, 8, $noreg
This patch takes a different approach: it adds another index to
MLocTracker that identifies a size/offset within a stack slot. A location
on the stack is then a pari of {FrameIndex, SlotNum}. Spilling and
restoring now involves pairing up the src/dest register numbers, and the
dest/src stack position to be transferred to/from. Location coverage
improves as a result, compile-time performance decreases, alas.
One limitation is that if a PHI occurs inside a stack slot:
DBG_PHI %stack.0, 1
We don't know how large the resulting value is, and so might have
difficulty picking which value to use. DBG_PHI might need to be augmented
in the future with such a size.
Unit tests added ensure that spills and restores correctly transfer to
positions in the Location => Value map, and that different register classes
written to the stack will correctly clobber all other positions in the
stack slot.
Differential Revision: https://reviews.llvm.org/D112133
Some dwarf loaders in LLVM are hard-coded to only accept 4-byte and 8-byte address sizes. This patch generalizes acceptance into `DWARFContext::isAddressSizeSupported` and provides a common way to generate rejection errors.
The MSP430 target has been given new tests to cover dwarf loading cases that previously failed due to 2-byte addresses.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D111953
When compiling for the RWPI relocation model the debug information is wrong:
* the debug location is described as { DW_OP_addr Var }
instead of { DW_OP_constNu Var DW_OP_bregX 0 DW_OP_plus }
* the relocation type is R_ARM_ABS32 instead of R_ARM_SBREL32
Differential Revision: https://reviews.llvm.org/D111404
Fixes an issue where GEP salvaging did not properly account for GEP
instructions which stepped over array elements of width 0 (effectively a
no-op). This unnecessarily produced long expressions by appending
`... + (x * 0)` and potentially extended the number of SSA values used
in the dbg.value. This also erroneously triggered an assert in the
salvage function that the element width would be strictly positive.
These issues are resolved by simply ignoring these useless operands.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D111809
With D110105, the isDebug flag for register uses is now a proxy for whether
the instruction is a debug instruction; that causes DBG_PHIs to have their
operands updated by calls to updateDbgUsersToReg, which is the correct
behaviour. However: that function only expects to receive DBG_VALUE
instructions and asserts such.
This patch splits the updating-action into a lambda, and applies it to the
appropriate operands for each kind of debug instruction. Tested with an
ARM test that stimulates this function: I've added some DBG_PHI
instructions that should be updated in the same way as DBG_VALUEs.
Differential Revision: https://reviews.llvm.org/D108641
Add support for demangling Rust v0 symbols to LLVM symbolizer by reusing
nonMicrosoftDemangle which supports both Itanium and Rust mangling.
Reviewed By: dblaikie, jhenderson
Part of https://reviews.llvm.org/D110664
After D80369, the retainedTypes in CU's should not have any subprograms
so we should not handle that case when emitting debug info.
Differential Revision: https://reviews.llvm.org/D111593
Fixes: https://bugs.llvm.org/show_bug.cgi?id=51841
This patch places an arbitrary limit on the size of DIExpressions that
we will produce via salvaging, for performance reasons. This helps to
fix a performance issue observed in the bug above, in which debug values
would be salvaged hundreds of times, producing expressions with over
1000 elements and causing the compiler to hang. Limiting the size of
debug values that we will produce to 128 largely fixes this issue.
Reviewed By: dblaikie, jmorse
Differential Revision: https://reviews.llvm.org/D110332
This patch is very similar to D110173 / a3936a6c19, but for variable
values rather than machine values. This is for the second instr-ref
problem, calculating the correct variable value on entry to each block.
The previous lattice based implementation was broken; we now use LLVMs
existing PHI placement utilities to work out where values need to merge,
then eliminate un-necessary ones through value propagation.
Most of the deletions here happen in vlocJoin: it was trying to pick a
location for PHIs to happen in, badly, leading to an infinite loop in the
MIR test added, where it would repeatedly switch between register
locations. The new approach is simpler: either PHIs can be eliminated, or
they can't, and the location of the value is a different problem.
Various bits and pieces move to the header so that they can be tested in
the unit tests. The DbgValue class grows a "VPHI" kind to represent
variable value PHIS that haven't been eliminated yet.
Differential Revision: https://reviews.llvm.org/D110630
Noticed in code review
4318028cd2 (commitcomment-57738034)
But the issue had already been fixed in
943b304848 due to a code checking tool
(PVS studio) identification, but that lacked test coverage.
Refactor this test a little bit too by using more CHECK-SAME to help the
checks fail sooner (rather than, if the addrx or sizes are wrong, having
that check bind to a much later output line - and then fail due to the
implicit-check-nots, which don't provide a lot of information about
where the intended check was likely to land) & more informatively.
Also modify the test to be more robust (current IR generation doesn't
include call sites for callees that are only declared but not defined -
so the test case couldn't be regenerated - add a function definition (&
optnone attribute) so it doesn't depend on call sites for
declared-but-not-defined functions)
Per discussion in https://reviews.llvm.org/D111199,
the existing btf_tag attribute will be renamed to
btf_decl_tag. This patch mostly updated the Bitcode and
DebugInfo test cases with new attribute name.
Differential Revision: https://reviews.llvm.org/D111591
The following tests are failing due to missing DWARF sections. This patch sets these tests as XFAIL/DISABLED on AIX until a more permanent solution is implemented.
Reviewed By: shchenz
Differential Revision: https://reviews.llvm.org/D111336
The following tests explicitly check for .loc and .file directives, which is not currently supported. Disable these tests on AIX for now.
Reviewed By: shchenz
Differential Revision: https://reviews.llvm.org/D111346
This change fixes a bug where the compiler generates a prologue_end
for line 0 locs. That is because line 0 is not associated with any
source location, so there should not be a prolgoue_end at a location
that doesn't correspond to a source location.
There were some LLVM tests that were explicitly checking for line 0
prologue_end's as well since I believe that to be incorrect, I had to
change those tests as well.
Patch by Shubham Rastogi!
Differential Revision: https://reviews.llvm.org/D110740
This reverts c7f16ab3e3 / r109694 - which
suggested this was done to improve consistency with the gdb test suite.
Possible that at the time GCC did not canonicalize integer types, and so
matching types was important for cross-compiler validity, or that it was
only a case of over-constrained test cases that printed out/tested the
exact names of integer types.
In any case neither issue seems to exist today based on my limited
testing - both gdb and lldb canonicalize integer types (in a way that
happens to match Clang's preferred naming, incidentally) and so never
print the original text name produced in the DWARF by GCC or Clang.
This canonicalization appears to be in `integer_types_same_name_p` for
GDB and in `TypeSystemClang::GetBasicTypeEnumeration` for lldb.
(I tested this with one translation unit defining 3 variables - `long`,
`long (*)()`, and `int (*)()`, and another translation unit that had
main, and a function that took `long (*)()` as a parameter - then
compiled them with mismatched compilers (either GCC+Clang, or
Clang+(Clang with this patch applied)) and no matter the combination,
despite the debug info for one CU naming the type "long int" and the
other naming it "long", both debuggers printed out the name as "long"
and were able to correctly perform overload resolution and pass the
`long int (*)()` variable to the `long (*)()` function parameter)
Did find one hiccup, identified by the lldb test suite - that CodeView
was relying on these names to map them to builtin types in that format.
So added some handling for that in LLVM. (these could be split out into
separate patches, but seems small enough to not warrant it - will do
that if there ends up needing any reverti/revisiting)
Differential Revision: https://reviews.llvm.org/D110455
An important part of the instruction referencing solution is that we
identify all the registers that values move between before we then compute
an SSA-like function from the machine code, and from the variable
intrinsics. DBG_PHIs weren't causing all the subregisters of their operands
to be tracked; this patch forces that to happen.
The practical implications were that not enough space is allocated for
storing values when analysing the function -- asan will crash on the
attached test case with an unpatched compiler. Non-asan llc's will produce
a DBG_VALUE $noreg, where it should be $dil.
Differential Revision: https://reviews.llvm.org/D109064
This patch makes instruction-referencing accepts an additional scenario
where values can be read from physical registers at the start of blocks. As
far as I was aware, this only happened:
* With arguments in the entry block,
* With constant physical registers,
To which this patch adds a third case:
* With exception-handling landing-pad blocks
In the attached test: the operand of the dbg.value traces back to the
"landingpad" instruction, which becomes some copies from physregs. Right
now, that's deemed unacceptable, and the assertion fires. The fix is to
just accept this scenario; this is a case where the value in question is
defined by a register and a position, not by an instruction that defines
it. Reading it with a DBG_PHI is the correct behaviour, there isn't a
non-copy instruction that we can refer to.
Differential Revision: https://reviews.llvm.org/D109005
This patch emits DW_TAG_namelist and DW_TAG_namelist_item for fortran
namelist variables. DICompositeType is extended to support this fortran
feature.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D108553
New field `elements` is added to '!DIImportedEntity', representing
list of aliased entities.
This is needed to dump optimized debugging information where all names
in a module are imported, but a few names are imported with overriding
aliases.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D109343
When handling register spill for indirect debug value LiveDebugValues pass doesn't add
DW_OP_deref operator which may in some cases cause debugger to return value address, instead
of value while machine register holding that address is spilled.
Differential revision: https://reviews.llvm.org/D109142
This does add some extra superfluous whitespace (eg: "int *") intended
to make the Simplified Template Names work easier - this makes the
DIE-based names match more exactly the clang-generated names, so it's
easier to identify cases that don't generate matching names.
(arguably we could change clang to skip that whitespace or add some
fuzzy matching to accommodate differences in certain whitespace - but
this seemed easier and fairly low-impact)
The file is requiring x86, but using llc without triple.
This will cause problem on non-x86 platforms, as the default triple will
not be x86.
eg: On PowerPC le, it will emit warnings as:
'x86-64' is not a recognized processor for this target (ignoring
processor)
'+cx8' is not a recognized feature for this target (ignoring feature)
'+fxsr' is not a recognized feature for this target (ignoring feature)
'+mmx' is not a recognized feature for this target (ignoring feature)
'+sse' is not a recognized feature for this target (ignoring feature)
..
On some other platform, it may even crash -- if some of the feature are
with same name (eg: soft-float).
Add the triple as this was the intention test target.
A new LLVM specific TAG DW_TAG_LLVM_annotation is added.
The name is suggested by Paul Robinson ([1]).
Currently, this tag is used to output __attribute__((btf_tag("string")))
annotations in dwarf. The following is an example for a global
variable with two btf_tag attributes:
0x0000002a: DW_TAG_variable
DW_AT_name ("g1")
DW_AT_type (0x00000052 "int")
DW_AT_external (true)
DW_AT_decl_file ("/tmp/home/yhs/work/tests/llvm/btf_tag/t.c")
DW_AT_decl_line (8)
DW_AT_location (DW_OP_addr 0x0)
0x0000003f: DW_TAG_LLVM_annotation
DW_AT_name ("btf_tag")
DW_AT_const_value ("tag1")
0x00000048: DW_TAG_LLVM_annotation
DW_AT_name ("btf_tag")
DW_AT_const_value ("tag2")
0x00000051: NULL
In the future, DW_TAG_LLVM_annotation may encode other type
of non-string const value.
[1] https://lists.llvm.org/pipermail/llvm-dev/2021-June/151250.html
Differential Revision: https://reviews.llvm.org/D106621
It looks like this array was missed in 4276d4a8d0
Fixed tests that expected `elements` to be empty or depeneded on the order of the empty DINode.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D107024
If we encounter a new debug value, describing the same parameter,
we should stop tracking the parameter's Entry Value. At that point,
in some cases, the Transfer which uses the parameter's Entry Value,
is already emitted. Thanks to the RemoveRedundantDebugValues pass,
many problems with incorrect instruction order and number of DBG_VALUEs
are fixed. However, we still cannot rely on the rule that each new
debug value is set by the previous non-debug instruction in Machine
Basic Block.
When new parameter debug value triggers removal of Backup Entry Value
for the same parameter, do the cleanup of Transfers emitted from Backup
Entry Values. Get the Transfer Instruction which created the new debug
value and search for debug values already emitted from the to-be-deleted
Backup Entry Value and attached to the Transfer Instruction. If found,
delete the Transfer and remove "primary" Entry Value Var Loc from
OpenRanges.
This patch fixes PR47628.
Patch by Nikola Tesic.
Differential revision: https://reviews.llvm.org/D106856
David Blaikie