Split-dwarf uses a different header format to specify the address range
for the elements of the location lists.
Differential revision: http://reviews.llvm.org/D12880
llvm-svn: 247789
Summary: SymbolFileDWARF now creates VarDecl and BlockDecl and adds them to the Decl tree. Then, in ClangExpressionDeclMap it uses the Decl tree to search for a variable. This fixes lots of variable scoping problems.
Reviewers: sivachandra, chaoren, spyffe, clayborg
Subscribers: tberghammer, jingham, lldb-commits
Differential Revision: http://reviews.llvm.org/D12658
llvm-svn: 247746
"gcc" register numbers are now correctly referred to as "ehframe"
register numbers. In almost all cases, ehframe and dwarf register
numbers are identical (the one exception is i386 darwin where ehframe
regnums were incorrect).
The old "gdb" register numbers, which I incorrectly thought were
stabs register numbers, are now referred to as "Process Plugin"
register numbers. This is the register numbering scheme that the
remote process controller stub (lldb-server, gdbserver, core file
support, kdp server, remote jtag devices, etc) uses to refer to the
registers. The process plugin register numbers may not be contiguous
- there are remote jtag devices that have gaps in their register
numbering schemes.
I removed all of the enums for "gdb" register numbers that we had
in lldb - these were meaningless - and I put LLDB_INVALID_REGNUM
in all of the register tables for the Process Plugin regnum slot.
This change is almost entirely mechnical; the one actual change in
here is to ProcessGDBRemote.cpp's ParseRegisters() which parses the
qXfer:features:read:target.xml response. As it parses register
definitions from the xml, it will assign sequential numbers as the
eRegisterKindLLDB numbers (the lldb register numberings must be
sequential, without any gaps) and if the xml file specifies register
numbers, those will be used as the eRegisterKindProcessPlugin
register numbers (and those may have gaps). A J-Link jtag device's
target.xml does contain a gap in register numbers, and it only
specifies the register numbers for the registers after that gap.
The device supports many different ARM boards and probably selects
different part of its register file as appropriate.
http://reviews.llvm.org/D12791
<rdar://problem/22623262>
llvm-svn: 247741
Before we had:
ClangFunction
ClangUtilityFunction
ClangUserExpression
and code all over in lldb that explicitly made Clang-based expressions. This patch adds an Expression
base class, and three pure virtual implementations for the Expression kinds:
FunctionCaller
UtilityFunction
UserExpression
You can request one of these expression types from the Target using the Get<ExpressionType>ForLanguage.
The Target will then consult all the registered TypeSystem plugins, and if the type system that matches
the language can make an expression of that kind, it will do so and return it.
Because all of the real expression types need to communicate with their ExpressionParser in a uniform way,
I also added a ExpressionTypeSystemHelper class that expressions generically can vend, and a ClangExpressionHelper
that encapsulates the operations that the ClangExpressionParser needs to perform on the ClangExpression types.
Then each of the Clang* expression kinds constructs the appropriate helper to do what it needs.
The patch also fixes a wart in the UtilityFunction that to use it you had to create a parallel FunctionCaller
to actually call the function made by the UtilityFunction. Now the UtilityFunction can be asked to vend a
FunctionCaller that will run its function. This cleaned up a lot of boiler plate code using UtilityFunctions.
Note, in this patch all the expression types explicitly depend on the LLVM JIT and IR, and all the common
JIT running code is in the FunctionCaller etc base classes. At some point we could also abstract that dependency
but I don't see us adding another back end in the near term, so I'll leave that exercise till it is actually necessary.
llvm-svn: 247720
Summary:
This was int64_t, but all usages of it came from code that was passing
in unsigned values. The usages of the array size, except for one, were
also treating it as an unsigned value. The usage that treated it as
signed was to try to figure out if it was a complete type or not, but
the callers creating the array didn't seem to be aware of using -1 as
an indicator for an incomplete array.
Reviewers: ribrdb, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12872
llvm-svn: 247662
I was experimenting with it briefly, and then settled on Target::GetTypeSystem + TypeSystem::GetBasicType, so this API is not necessary to have
Thanks to Ryan Brown for bringing it to my attention
llvm-svn: 247195
* Create new dwo symbol file class
* Add handling for .dwo sections
* Change indexes in SymbolFileDWARF to store compile unit offset next to
DIE offset
* Propagate queries from dwarf compile unit to the dwo compile unit
where applicable
Differential revision: http://reviews.llvm.org/D12291
llvm-svn: 247132
This used to be hardcoded in the FormatManager, but in a pluginized world that is not the right way to go
So, move this step to the Language plugin such that appropriate language plugins for a type get a say about adding candidates to the formatters lookup tables
llvm-svn: 247112
As part of our overall switch from hand-rolling RTTI to using LLVM-compatible
methods, I've done the same for ExpressionVariable. The main documentation for
how to do this is in TypeSystem.h, so I've simply referred to that.
llvm-svn: 247085
This will keep our code cleaner and it removes the need for intrusive additions to TypeSystem like:
class TypeSystem
{
virtual ClangASTContext *
AsClangASTContext() = 0;
}
As you can now just use the llvm::dyn_cast and other casts.
llvm-svn: 247041
It is required because of the following edge case on arm:
bx <addr> Non-tail call in a no return function
[data-pool] Marked with $d mapping symbol
The return address of the function call will point to the data pool but
we have to treat it as code so the StackFrame can calculate the symbols
correctly.
Differential revision: http://reviews.llvm.org/D12556
llvm-svn: 246958
stores information about a variable that different parts of LLDB use, from the
compiler-specific portion that only the expression parser cares about.
http://reviews.llvm.org/D12602
llvm-svn: 246871
Summary:
GetOptInc provides getopt(), getopt_long() and getopt_long_only().
Windows (for defined(_MSC_VER)) doesn't ship with all of the getopt(3) family members and needs all of them. NetBSD requires only getopt_long_only(3).
While there fix the code for clang diagnostics.
Author: Kamil Rytarowski
Reviewers: joerg
Subscribers: labath, zturner, lldb-commits
Differential Revision: http://reviews.llvm.org/D12582
llvm-svn: 246843
* Use the frame's context (instead of just the target's) when evaluating,
so that the language of the frame's CU can be used to select the
compiler and/or compiler options to use when parsing the expression.
This allows for modules built with mixed languages to be parsed in
the context of their frame.
* Add all C and C++ language variants when determining the language options
to set.
* Enable C++ language options when language is C or ObjC as a workaround since
the expression parser uses features of C++ to capture values.
* Enable ObjC language options when language is C++ as a workaround for ObjC
requirements.
* Disable C++11 language options when language is C++03.
* Add test TestMixedLanguages.py to check that the language being used
for evaluation is that of the frame.
* Fix test TestExprOptions.py to check for C++11 instead of C++ since C++ has
to be enabled for C, and remove redundant expr --language test for ObjC.
* Fix TestPersistentPtrUpdate.py to not require C++11 in C.
Reviewed by: clayborg, spyffe, jingham
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11102
llvm-svn: 246829
This is still something I need to fix, but at least it's not so ugly, and it's
consistent with the other code that does that so we will catch it when we purge
all such code.
llvm-svn: 246738
Clang-specific part, create the ExpressionVariable source/header file and
move ClangExpressionVariable into the Clang expression parser plugin.
It is expected that there are some ugly #include paths... these will be resolved
by either (1) making that code use generic expression variables (once they're
separated appropriately) or (2) moving that code into a plug-in, often
the expression parser plug-in.
llvm-svn: 246737
If a command argument contains a space then it have to be escaped with
backslash signs so the argument parsing logic can parse it properly.
This CL fixes the tab completion code for the arguments to create
complitions with correctly escaped strings.
Differential revision: http://reviews.llvm.org/D12531
llvm-svn: 246639
These are useful helpers over the low-level API of the FormattersContainer, and since we're actually going to start moving formatters into plugins, it makes sense to simplify things
llvm-svn: 246612
Historically, data formatters all exist in a global repository (the category map)
On top of that, some formatters can be "hardcoded" when the conditions under which they apply are not expressible as a typename (or typename regex)
This change paves the way to move formatters into per-language buckets such that the C++ plugin is responsible for ownership of the C++ formatters, and so on
The advantages of this are:
a) language formatters only get created when they might apply
b) formatters for a language are clearly owned by the matching language plugin
The current model is one of static instantiation, that is a language knows the full set of formatters it vends and that is only asked-for once, and then handed off to the FormatManager
In a future revision it might be interesting to add similar ability to the language runtimes, and monitor for certain shared library events to add even more library-specific formatters
No formatters are moved as part of this change, so practically speaking this is NFC
llvm-svn: 246568
Historically, data formatters all exist in a global repository (the category map)
On top of that, some formatters can be "hardcoded" when the conditions under which they apply are not expressible as a typename (or typename regex)
This change paves the way to move formatters into per-language buckets such that the C++ plugin is responsible for ownership of the C++ formatters, and so on
The advantages of this are:
a) language formatters only get created when they might apply
b) formatters for a language are clearly owned by the matching language plugin
The current model is one of static instantiation, that is a language knows the full set of formatters it vends and that is only asked-for once, and then handed off to the FormatManager
In a future revision it might be interesting to add similar ability to the language runtimes, and monitor for certain shared library events to add even more library-specific formatters
No formatters are moved as part of this change, so practically speaking this is NFC
llvm-svn: 246515
class DWARFASTParser
{
public:
virtual ~DWARFASTParser() {}
virtual lldb::TypeSP
ParseTypeFromDWARF (const lldb_private::SymbolContext& sc,
const DWARFDIE &die,
lldb_private::Log *log,
bool *type_is_new_ptr) = 0;
virtual lldb_private::Function *
ParseFunctionFromDWARF (const lldb_private::SymbolContext& sc,
const DWARFDIE &die) = 0;
virtual bool
CompleteTypeFromDWARF (const DWARFDIE &die,
lldb_private::Type *type,
lldb_private::CompilerType &clang_type) = 0;
virtual lldb_private::CompilerDeclContext
GetDeclContextForUIDFromDWARF (const DWARFDIE &die) = 0;
virtual lldb_private::CompilerDeclContext
GetDeclContextContainingUIDFromDWARF (const DWARFDIE &die) = 0;
};
We have one subclass named DWARFASTParserClang that implements all of the clang specific AST type parsing. This keeps all DWARF parsing in the DWARF plug-in. Moved all of the DWARF parsing code that was in ClangASTContext over into DWARFASTParserClang.
lldb_private::TypeSystem classes no longer have any DWARF parsing functions in them, but they can hand out a DWARFASTParser:
virtual DWARFASTParser *
GetDWARFParser ()
{
return nullptr;
}
This keeps things clean and makes for easy merging when we have different AST's for different languages.
llvm-svn: 246242
The Language plugin is menat to answer language-specific questions that are not bound to the existence of a process. Those are still the domain of the LanguageRuntime plugin
The Language plugin will, instead, answer questions such as providing language-specific data formatters or expression evaluation
At the moment, the interface is hollowed out, and empty do-nothing plugins have been setup for ObjC, C++ and ObjC++
llvm-svn: 246212
This will do things like,
given mylibrary,
return
libmylibrary.dylib on OSX
mylibrary.dll on Windows
and so on for other platforms
It is currently implemented for Windows, Darwin, and Linux. Other platforms should fill in accordingly
llvm-svn: 246131
Added a new class called DWARFDIE that contains a DWARFCompileUnit and DWARFDebugInfoEntry so that these items always stay together.
There were many places where we just handed out DWARFDebugInfoEntry pointers and then use them with a compile unit that may or may not be the correct one. Clients outside of DWARFCompileUnit and DWARFDebugInfoEntry should all be dealing with DWARFDIE instances instead of playing with DWARFCompileUnit/DWARFDebugInfoEntry pairs manually.
This paves to the way for some modifications that are coming for DWO.
llvm-svn: 246100
SUMMARY:
This patch implements Target::GetBreakableLoadAddress() method that takes an address
and checks for any reason there is a better address than this to put a breakpoint on.
If there is then return that address.
MIPS uses this method to avoid breakpoint in delay slot.
Reviewers: clayborg, jingham
Subscribers: jingham, mohit.bhakkad, sagar, jaydeep, nitesh.jain, lldb-commits
Differential Revision: http://http://reviews.llvm.org/D12184
llvm-svn: 246015
These are 2 new value currently in experimental status used when split
debug info is enabled.
Differential revision: http://reviews.llvm.org/D12238
llvm-svn: 245931
Create a new "lldb_private::CompilerDeclContext" class that will replace all direct uses of "clang::DeclContext" when used in compiler agnostic code, yet still allow for conversion to clang::DeclContext subclasses by clang specific code. This completes the abstraction of type parsing by removing all "clang::" references from the SymbolFileDWARF. The new "lldb_private::CompilerDeclContext" class abstracts decl contexts found in compiler type systems so they can be used in internal API calls. The TypeSystem is required to support CompilerDeclContexts with new pure virtual functions that start with "DeclContext" in the member function names. Converted all code that used lldb_private::ClangNamespaceDecl over to use the new CompilerDeclContext class and removed the ClangNamespaceDecl.cpp and ClangNamespaceDecl.h files.
Removed direct use of clang APIs from SBType and now use the abstract type systems to correctly explore types.
Bulk renames for things that used to return a ClangASTType which is now CompilerType:
"Type::GetClangFullType()" to "Type::GetFullCompilerType()"
"Type::GetClangLayoutType()" to "Type::GetLayoutCompilerType()"
"Type::GetClangForwardType()" to "Type::GetForwardCompilerType()"
"Value::GetClangType()" to "Value::GetCompilerType()"
"Value::SetClangType (const CompilerType &)" to "Value::SetCompilerType (const CompilerType &)"
"ValueObject::GetClangType ()" to "ValueObject::GetCompilerType()"
many more renames that are similar.
llvm-svn: 245905
The POSIX linker generally reports the load bias for the loaded
libraries but in some case it is useful to handle a library based on
absolute load address. Example usecases:
* Windows linker uses absolute addresses
* Library list came from different source (e.g. /proc/<pid>/maps)
Differential revision: http://reviews.llvm.org/D12233
llvm-svn: 245834
Summary:
dllexport doesn't work if linking against a static library with its own
copy of snprintf.
Reviewers: zturner
Subscribers: zturner, lldb-commits
Differential Revision: http://reviews.llvm.org/D12206
llvm-svn: 245610
Eliminated ENABLE_128_BIT_SUPPORT and union ValueData from Scalar.cpp and use llvm::APInt and llvm::APFloat for all integer and floating point types. Also used Scalar in RegisterValue.cpp
Reviewers: tberghammer, ovyalov, clayborg, labath
Subscribers: lldb-commits, nitesh.jain, jaydeep
Differential: http://reviews.llvm.org/D12100
llvm-svn: 245547
Eliminated ENABLE_128_BIT_SUPPORT and union ValueData from Scalar.cpp and use llvm::APInt and llvm::APFloat for all integer and floating point types. Also used Scalar in RegisterValue.cpp
Reviewers: jaydeep, clayborg, jasonmolenda, ovyalov, emaste
Subscribers: tberghammer, ovyalov, emaste, mohit.bhakkad, nitesh.jain, bhushan
Differential: http://reviews.llvm.org/D10919
llvm-svn: 245216
for eh_frame and stabs register numberings. This is not
complete but it's a step in the right direction. It's almost
entirely mechanical.
lldb informally uses "gcc register numbering" to mean eh_frame.
Why? Probably because there's a notorious bug with gcc on i386
darwin where the register numbers in eh_frame were incorrect.
In all other cases, eh_frame register numbering is identical to
dwarf.
lldb informally uses "gdb register numbering" to mean stabs.
There are no official definitions of stabs register numbers
for different architectures, so the implementations of gdb
and gcc are the de facto reference source.
There were some incorrect uses of these register number types
in lldb already. I fixed the ones that I saw as I made
this change.
This commit changes all references to "gcc" and "gdb" register
numbers in lldb to "eh_frame" and "stabs" to make it clear
what is actually being represented.
lldb cannot parse the stabs debug format, and given that no
one is using stabs any more, it is unlikely that it ever will.
A more comprehensive cleanup would remove the stabs register
numbers altogether - it's unnecessary cruft / complication to
all of our register structures.
In ProcessGDBRemote, when we get register definitions from
the gdb-remote stub, we expect to see "gcc:" (qRegisterInfo)
or "gcc_regnum" (qXfer:features:read: packet to get xml payload).
This patch changes ProcessGDBRemote to also accept "ehframe:"
and "ehframe_regnum" from these remotes.
I did not change GDBRemoteCommunicationServerLLGS or debugserver
to send these new packets. I don't know what kind of interoperability
constraints we might be working under. At some point in the future
we should transition to using the more descriptive names.
Throughout lldb we're still using enum names like "gcc_r0" and "gdb_r0",
for eh_frame and stabs register numberings. These should be cleaned
up eventually too.
The sources link cleanly on macosx native with xcode build. I
don't think we'll see problems on other platforms but please let
me know if I broke anyone.
llvm-svn: 245141
Another step towards isolating all language/AST specific code into the files to further abstract specific implementations of parsing types for a given language.
llvm-svn: 245090
SUMMARY:
Last 3bits of the watchpoint address are masked by the kernel. For example, n is
at 0x120010d00 and m is 0x120010d04. When a watchpoint is set at m, then watch
exception is generated even when n is read/written. To handle this case, instruction
at PC is emulated to find the base address of the load/store instruction. This address
is then appended to the description of the stop-info packet. Client then reads this
information to check whether the user has set a watchpoint on this address.
Reviewers: jingham, clayborg
Subscribers: nitesh.jain, mohit.bhakkad, sagar, bhushan and lldb-commits
Differential Revision: http://reviews.llvm.org/D11672
llvm-svn: 244864
On android .oat files (compiled java code) don't have symbol
information but on SDK 23+ it can be generated by the oatdump tool
(based on the dex information).
This CL adds logic to download this information and store it in the
module cache.
Differential revision: http://reviews.llvm.org/D11936
llvm-svn: 244738
This is more preparation for multiple different kinds of types from different compilers (clang, Pascal, Go, RenderScript, Swift, etc).
llvm-svn: 244689
This is the work done by Ryan Brown from http://reviews.llvm.org/D8712 that makes a TypeSystem class and abstracts types to be able to use a type system.
All tests pass on MacOSX and passed on linux the last time this was submitted.
llvm-svn: 244679
contained within Process so that we won't be duplicating the warning
message if other parts of the code want to issue the message. Change
Process::PrintWarning to be a protected method - the public method
will be the PrintWarningOptimization et al. Also, Have
Thread::FunctionOptimizationWarning shortcut out if the warnings
have been disabled so that we don't (potentially) compute parts of
the SymbolContext unnecessarily.
llvm-svn: 244436
This change :
- Fixes offsets of all register sets for Mips.
- Adds MSA register set and FRE=1 mode support for FP register set.
- Separates lldb register numbers and register infos of freebsd/mips64 from linux/mips64.
- Re-orders the register numbers of all kinds for mips to be consistent with freebsd order of register numbers.
- Eliminates ENABLE_128_BIT_SUPPORT and union ValueData from Scalar.cpp and uses llvm::APInt and llvm::APFloat for all integer and floating point types.
Reviewers : emaste, jaydeep, clayborg
Subscribers : emaste, mohit.bhakkad, nitesh.jain, bhushan
Differential : http://reviews.llvm.org/D10919
llvm-svn: 244308
The first part was in r243508 -- the extent of the UI changes in that
patchset was to add "[opt]" to the frame-format when a stack frame was
built with optimized code.
In this change, when a stack frame built with optimization is selected,
a message will be printed to the async output channel --
opt1.c was compiled with optimization - stepping may behave oddly; variables may not be available.
The warning will be only be printed once per source file in a debug session.
These warnings may be disabled by
settings set target.process.optimization-warnings false
Internally, a new Process::PrintWarning() method has been added for
warnings that we want to print only once to the user. It takes a type
of warning (currently only eWarningsOptimization) and an object
pointer (CompileUnit*) - the warning will only be printed once for a
given object pointer value.
This is a bit of a prototype of this change - I think we will be
tweaking it more in the future. But I wanted to land this and see
how it goes. Advanced users will find these warnings unnecessary
noise and will quickly disable them - but anyone who maintains a
debugger knows that debugging optimized code, without realizing it,
is a constant source of confusion and frustation for more typical
debugger users.
I imagine there will be more of these "warn once per whatever" style
warnings that we will want to add in the future and we'll need to
come up with a better way for enabling/disabling them. But I'm not
srue what form that warning settings should take and I didn't want
to code up something that we regret later, so for now I just added
another process setting for this one warning.
<rdar://problem/19281172>
llvm-svn: 244190
Previously embedded interpreters were handled as ad-hoc source
files compiled into source/Interpreter. This made it hard to
disable a specific interpreter, or to add support for other
interpreters and allow the developer to choose which interpreter(s)
were enabled for a particular build.
This patch converts script interpreters over to a plugin-based system.
Script interpreters now live in source/Plugins/ScriptInterpreter, and
the canonical LLDB interpreter, ScriptInterpreterPython, is moved there
as well.
Any new code interfacing with the Python C API must live in this location
from here on out. Additionally, generic code should never need to
reference or make assumptions about the presence of a specific interpreter
going forward.
Differential Revision: http://reviews.llvm.org/D11431
Reviewed By: Greg Clayton
llvm-svn: 243681
The following functions were the only functions that updates the source file:
SourceManager::File::DisplaySourceLines()
SourceManager::File::FindLinesMatchingRegex()
But there we API calls that were using the SourceManager::File and asking it questions, like "is line 12 valid" and that might respond incorrectly if the source file had been updated.
<rdar://problem/21269402>
llvm-svn: 243551
owners list, so the StopInfo machinery can get the list of owners without
some other thread being able to mess up the list by deleting/disabline one of its
locations in the process of doing so.
<rdar://problem/18685197>
llvm-svn: 243541
debugging optimized code. Adds new methods on Function/SBFunction
to query whether a given function is optimized. Adds a new
function.is-optimized format entity and changes the default
frame-format to append "[opt]" if the function was built with
optimization.
The only indication that a binary was built with optimization
that we have right now is the presence of the DW_AT_APPLE_optimized
attribute (DW_FORM_flag value 1) in the DW_TAG_compile_unit.
The absence of this flag may mean that the compile_unit was not
compiled with optimization, or it may mean that the producer
does not generate this attribute.
Currently this only works for dSYM debugging. When we create
the CompileUnit with dwarf-in-.o-file debugging we don't have
the attribute value yet so it's not set. I need to find the
flag value when we do start to read the .o file DWARF and
set the CompileUnit's status at that point - but haven't
done it yet.
I'm also going to add a mechanism for issuing warnings to users
such that they're only issued once in a debug session and
there is away for users to suppress these warnings altogether
via .lldbinit file settings. But I want to get this changeset
committed now that it's at a useful state.
<rdar://problem/19281172>
llvm-svn: 243508
Summary:
For certain data structures, when the synthetic child provider returns
zero children, a summary like "Empty instance of <typename>" could be
more appropriate than something like "size=0 {}". This new option helps
hide the trailing "{}".
This is also exposed with a -h option for the command "type summary add".
Reviewers: granata.enrico
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11473
llvm-svn: 243166
This commit introduced an infinite recursion in
ValueObjectChild::CanUpdateWithInvalidExecutionContext (because FollowParentChain also considers
the current object), which broke nearly all the tests. Ignoring the current object removes the
recursion, but two tests still time out (TestDataFormatterLibcxxList.py and
TestValueObjectRecursion.py) for some reason. Reverting for now.
llvm-svn: 243102
The issue is that a child can't really ask the root object, since this decision could actually hinge on whether a dynamic and/or synthetic value is present
To do this, make values vote lazily for whether they are willing to allow this, so that we can navigate up the chain without recursively invoking ourselves
Tentative fix for rdar://21949558
llvm-svn: 243077
Summary:
This replaces (void)x; usages where they x was subsequently
involved in an assertion with this macro to make the
intent more clear.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11451
llvm-svn: 243074
but that wasn't added to the list of reasons they don't explain. That
would mean we keep stepping after hitting the AsanDie breakpoint rather
than stopping when the Asan event occurred.
<rdar://problem/21925479>
llvm-svn: 243035
Summary:
This enables us to avoid casts to "void *" in some cases and avoids a couple of "casts off const
qualifiers" warnings.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11388
llvm-svn: 242874
Target and breakpoints options were added:
breakpoint set --language lang --name func
settings set target.language pascal
These specify the Language to use when interpreting the breakpoint's
expression (note: currently only implemented for breakpoints on
identifiers). If the breakpoint language is not set, the target.language
setting is used.
This support is required by Pascal, for example, to set breakpoint at 'ns.foo'
for function 'foo' in namespace 'ns'.
Tests on the language were also added to Module::PrepareForFunctionNameLookup
for efficiency.
Reviewed by: clayborg
Subscribers: jingham, lldb-commits
Differential Revision: http://reviews.llvm.org/D11119
llvm-svn: 242844
Summary:
This commit integrates MainLoop into NativeProcessLinux. By registering a SIGCHLD handler with
the llgs main loop, we can get rid of the special monitor thread in NPL, which saves as a lot of
thread ping-pong when responding to client requests (e.g. qThreadInfo processing time has been
reduced by about 40%). It also makes the code simpler, IMHO.
Reviewers: ovyalov, clayborg, tberghammer, chaoren
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11150
This is a resubmission of r242305 after it was reverted due to bad interactions with the stdio
thread.
llvm-svn: 242783
I have observed an increased flakyness in the buildbots. I suspect something was relying on the
fact that Pipe::Write had an implicit timeout of 1s, which this commit has removed. Reverting
while I investigate.
llvm-svn: 242767
Summary:
This commit adds a WriteWithTimeout method to time Pipe class, analogous to the existing
ReadWithTimeout(). It also changes the meaning of passing zero as a timeout value. Previously,
zero was used as an infinite timeout value. Now, the meaning of zero timeout to return the data
avaiable without sleeping (basically, a non-blocking operation). This makes the behaviour of Pipe
consistent with the Communication/Connection classes. For blocking operatios with infinite
timeout, I introduce a special constant for this purpose.
Reviewers: ovyalov, zturner
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11358
llvm-svn: 242764
Changed the "jthreads" key/value in the stop reply packets to be "jstopinfo". This JSON only contains threads with valid stop reasons and allows us not to have to ask about other threads via qThreadStopInfo when we are stepping. The "jstopinfo" only gets sent if there are more than one thread since the stop reply packet contains all the info needed for a single thread.
Added a Process::WillPublicStop() in case process subclasses want to do any extra gathering for public stops. For ProcessGDBRemote, we end up sending a jThreadsInfo packet to gather all expedited registers, expedited memory and MacOSX queue information. We only do this for public stops to minimize the packets we send when we have multiple private stops. Multiple private stops happen when a source level single step, step into or step out run the process multiple times while implementing the stepping, and none of these private stops make it out to the UI via notifications because they are private stops.
llvm-svn: 242593
Don't chane the CFI information when a conditional instruction
is emulated (eg.: popeq {r0, pc}) because the CFI for the next
instruction should be the same as the CFI for the current instruction.
Differential revision: http://reviews.llvm.org/D11258
llvm-svn: 242519
Upon connection termination the waitable handle of an IOObject gets reset to an invalid handle.
This caused a problem since we used the object->GetWaitableHandle as a key to the set of
registered events. The fix is to use something more immutable as a key: we make a copy of the
original waitable handle, instead of holding onto the IOObject.
llvm-svn: 242515
SUMMARY:
The patch detects MIPS application specific extensions (ASE) like micromips by reading
ELF header.e_flags and SHT_MIPS_ABIFLAGS section. MIPS triple does not contain ASE
information like micromips, mips16, DSP, MSA etc. These can be read from header.e_flags
or SHT_MIPS_ABIFLAGS section.
Reviewers: clayborg
Subscribers: mohit.bhakkad, sagar, lldb-commits
Differential Revision: http://reviews.llvm.org/D11133
llvm-svn: 242381
Summary:
Other changes around the main change include:
1. Add a method Cast to ValueObjectConstResult, ValueObjectConstResultImpl
and ValueObjectConstResultChild.
2. Add an argument |live_address| of type lldb::addr_t to the constructor
of ValueObjectConstResultChild. This is passed on to the backing
ValueObjectConstResultImpl object constructor so that the address of the
child value can be calculated properly.
Reviewers: granata.enrico, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11203
llvm-svn: 242374
Summary:
This commit integrates MainLoop into NativeProcessLinux. By registering a SIGCHLD handler with
the llgs main loop, we can get rid of the special monitor thread in NPL, which saves as a lot of
thread ping-pong when responding to client requests (e.g. qThreadInfo processing time has been
reduced by about 40%). It also makes the code simpler, IMHO.
Reviewers: ovyalov, clayborg, tberghammer, chaoren
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11150
llvm-svn: 242305
For Hexagon we want to be able to call functions during debugging, however currently lldb only supports this when there is JIT support.
Although emulation using IR interpretation is an alternative, it is currently limited in that it can't make function calls.
In this patch we have extended the IR interpreter so that it can execute a function call on the target using register manipulation.
To do this we need to handle the Call IR instruction, passing arguments to a new thread plan and collecting any return values to pass back into the IR interpreter.
The new thread plan is needed to call an alternative ABI interface of "ABI::PerpareTrivialCall()", allowing more detailed information about arguments and return values.
Reviewers: jingham, spyffe
Subscribers: emaste, lldb-commits, ted, ADodds, deepak2427
Differential Revision: http://reviews.llvm.org/D9404
llvm-svn: 242137
Existing commands supplying this type of help content have been reworked to take advantage of the changes. In addition to formatting changes, content was changes for accuracy and clarity purposes.
<rdar://problem/21269977>
llvm-svn: 242122
Summary:
- Consolidate Unix signals selection in UnixSignals.
- Make Unix signals available from platform.
- Add jSignalsInfo packet to retrieve Unix signals from remote platform.
- Get a copy of the platform signal for each remote process.
- Update SB API for signals.
- Update signal utility in test suite.
Reviewers: ovyalov, clayborg
Subscribers: chaoren, jingham, labath, emaste, tberghammer, lldb-commits
Differential Revision: http://reviews.llvm.org/D11094
llvm-svn: 242101
Summary:
This is the first part of our effort to make llgs single threaded. Currently, llgs consists of
about three threads and the synchronisation between them is a major source of latency when
debugging linux and android applications.
In order to be able to go single threaded, we must have the ability to listen for events from
multiple sources (primarily, client commands coming over the network and debug events from the
inferior) and perform necessary actions. For this reason I introduce the concept of a MainLoop.
A main loop has the ability to register callback's which will be invoked upon receipt of certain
events. MainLoopPosix has the ability to listen for file descriptors and signals.
For the moment, I have merely made the GDBRemoteCommunicationServerLLGS class use MainLoop
instead of waiting on the network socket directly, but the other threads still remain. In the
followup patches I indend to migrate NativeProcessLinux to this class and remove the remaining
threads.
Reviewers: ovyalov, clayborg, amccarth, zturner, emaste
Subscribers: tberghammer, lldb-commits
Differential Revision: http://reviews.llvm.org/D11066
llvm-svn: 242018
jGetLoadedDynamicLibrariesInfos. This packet is similar to
qXfer:libraries:read except that lldb supplies the number of solibs
that should be reported about, and the start address for the list
of them. At the initial process launch we'll read the full list
of solibs linked by the process -- at this point we could be using
qXfer:libraries:read -- but on subsequence solib-loaded notifications,
we'll be fetching a smaller number of solibs, often only one or two.
A typical Mac/iOS GUI app may have a couple hundred different
solibs loaded - doing all of the loads via memory reads takes
a couple of megabytes of traffic between lldb and debugserver.
Having debugserver summarize the load addresses of all the solibs
and sending it in JSON requires a couple of hundred kilobytes
of traffic. It's a significant performance improvement when
communicating over a slower channel.
This patch leaves all of the logic for loading the libraries
in DynamicLoaderMacOSXDYLD -- it only call over ot ProcesGDBRemote
to get the JSON result.
If the jGetLoadedDynamicLibrariesInfos packet is not implemented,
the normal technique of using memory read packets to get all of
the details from the target will be used.
<rdar://problem/21007465>
llvm-svn: 241964
Summary:
This commit avoids the Platform instance when spawning or attaching to a process in lldb-server.
Instead, I have the server call a (static) method of NativeProcessProtocol directly. The reason
for this is that I believe that NativeProcessProtocol should be decoupled from the Platform
(after all, it always knows which platform it is running on, unlike the rest of lldb).
Additionally, the kind of platform actions a NativeProcessProtocol instance is likely to differ
greatly from the platform actions of the lldb client, so I think the separation makes sense.
After this, the only dependency NativeProcessLinux has on PlatformLinux is the ResolveExecutable
method, which needs additional refactoring.
This is a resubmit of r241672, after it was reverted due to build failueres on non-linux
platforms.
Reviewers: ovyalov, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D10996
llvm-svn: 241796
platform-specific symbols that are not implemented on OS X.
The build error that caused this is
Undefined symbols for architecture x86_64:
"lldb_private::NativeProcessProtocol::Attach(unsigned long long, lldb_private::NativeProcessProtocol::NativeDelegate&, std::__1::shared_ptr<lldb_private::NativeProcessProtocol>&)", referenced from:
lldb_private::process_gdb_remote::GDBRemoteCommunicationServerLLGS::AttachToProcess(unsigned long long) in liblldb-core.a(GDBRemoteCommunicationServerLLGS.o)
"lldb_private::NativeProcessProtocol::Launch(lldb_private::ProcessLaunchInfo&, lldb_private::NativeProcessProtocol::NativeDelegate&, std::__1::shared_ptr<lldb_private::NativeProcessProtocol>&)", referenced from:
lldb_private::process_gdb_remote::GDBRemoteCommunicationServerLLGS::LaunchProcess() in liblldb-core.a(GDBRemoteCommunicationServerLLGS.o)
ld: symbol(s) not found for architecture x86_64
clang: error: linker command failed with exit code 1 (use -v to see invocation)
llvm-svn: 241688
Summary:
This commit avoids the Platform instance when spawning or attaching to a process in lldb-server.
Instead, I have the server call a (static) method of NativeProcessProtocol directly. The reason
for this is that I believe that NativeProcessProtocol should be decoupled from the Platform
(after all, it always knows which platform it is running on, unlike the rest of lldb).
Additionally, the kind of platform actions a NativeProcessProtocol instance is likely to differ
greatly from the platform actions of the lldb client, so I think the separation makes sense.
After this, the only dependency NativeProcessLinux has on PlatformLinux is the ResolveExecutable
method, which needs additional refactoring.
Reviewers: ovyalov, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D10996
llvm-svn: 241672
The summary is - quite simply - a one-line printout of the vector elements
We still need synthetic children:
a) as a source of the elements to print in the summary
b) for graphical IDEs that display structure regardless of the summary settings
rdar://5429347
llvm-svn: 241531
Change over existing code to use this new parser so StructuredData can use the tokenizer to parse JSON instead of doing it manually.
This allowed us to easily parse JSON into JSON* objects as well as into StructuredData.
llvm-svn: 241522
This API is currently a no-op (in the sense that it has the same behavior as the already existing GetName()), but is meant long-term to provide a best-for-visualization version of the name of a function
It is still not hooked up to the command line 'bt' command, nor to the 'gui' mode, but I do have ideas on how to make that work going forward
rdar://21203242
llvm-svn: 241482
Previously we handled only a few opcode DWARF CFI opcode when we
were parsing the CIE. With this change we use mostly the same code
what we use for parsing the PDE which cover more opcode.
Differential revision: http://reviews.llvm.org/D10866
llvm-svn: 241332
This is because - in theory - the formatter could match on not just the type, but also other properties of a ValueObject, so a per-type caching would not be a good thing
On the other hand, that is not always true - sometimes the matching truly is per-type
So, introduce a non-cacheable attribute on formatters that decides whether a formatter should or should not be cached. That way, the few formatters that don't want themselves cached can do so, but most formatters (including most hard-coded ones) can cache themselves just fine
llvm-svn: 241184
The new names clarify that the members have to do with the execution
context and not the language. For example, m_cplusplus was renamed to
m_in_cplusplus_method.
llvm-svn: 241132
Fixes include:
- use FileSystem::Unlink() instead of a direct call to ::unlink(...) when deleting files when iterating through the current directory
- save directories from current directory in a list and iterate through those _after_ the current directory has been iterated
- Use new FileSpec::ForEachItemInDirectory() instead of manually iterating across directories with opendir()/readdir()/closedir()
We should switch all code over to using FileSpec::ForEachItemInDirectory(...) in the near future and get rid of FileSpec::EnumerateDirectory().
This is a follow up patch to:
http://reviews.llvm.org/D10787
llvm-svn: 240978
Summary:
Some old linux versions do not have process_vm_readv function defined. Even older versions do not
have even the __NR_process_vm_readv syscall number. We use cmake to detect these situations and
fallback appropriately: in the first case, we can issue the syscall manually, while it the latter
case, we need to drop fast memory read support completely.
Test Plan: linux test suite passes
Reviewers: ovyalov, Eugene.Zelenko
Subscribers: tberghammer, lldb-commits
Differential Revision: http://reviews.llvm.org/D10727
llvm-svn: 240927
A few extras were fixed
- Symbol::GetAddress() now returns an Address object, not a reference. There were places where people were accessing the address of a symbol when the symbol's value wasn't an address symbol. On MacOSX, undefined symbols have a value zero and some places where using the symbol's address and getting an absolute address of zero (since an Address object with no section and an m_offset whose value isn't LLDB_INVALID_ADDRESS is considered an absolute address). So fixing this required some changes to make sure people were getting what they expected.
- Since some places want to access the address as a reference, I added a few new functions to symbol:
Address &Symbol::GetAddressRef();
const Address &Symbol::GetAddressRef() const;
Linux test suite passes just fine now.
<rdar://problem/21494354>
llvm-svn: 240702
The language can not be definitively determined from the mangling, so
this new name helps clarify that fact. This addresses the concerns raised
in http://reviews.llvm.org/rL226962.
Reviewed by: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D10723
llvm-svn: 240662
* Add and fix the emulation of several instruction.
* Disable frame pointer usage on Android.
* Specify return address register for the unwind plan instead of explict
tracking the value of RA.
* Replace prologue detection heuristics (unreliable in several cases)
with a logic to follow the branch instructions and restore the CFI
value based on them. The target address for a branch should have the
same CFI as the source address (if they are in the same function).
* Handle symbols in ELF files where the symbol size is not specified
with calcualting their size based on the next symbol (already done
in MachO files).
* Fix architecture in FuncUnwinders with filling up the inforamtion
missing from the object file with the architecture of the target.
* Add code to read register wehn the value is set to "IsSame" as it
meanse the value of a register in the parent frame is the same as the
value in the current frame.
Differential revision: http://reviews.llvm.org/D10447
llvm-svn: 240533
A "qSymbol::" is sent when shared libraries have been loaded by hooking into the Process::ModulesDidLoad() function from within ProcessGDBRemote. This function was made virtual so that the ProcessGDBRemote version is called, which then first calls the Process::ModulesDidLoad(), and then it queries for any symbol lookups that the remote GDB server might want to do.
This allows debugserver to request the "dispatch_queue_offsets" symbol so that it can read the queue name, queue kind and queue serial number and include this data as part of the stop reply packet. Previously each thread would have to do 3 memory reads in order to read the queue name.
This is part of reducing the number of packets that are sent between LLDB and the remote GDB server.
<rdar://problem/21494354>
llvm-svn: 240466
a hand-called function from the private state thread. The problem
was that on the way out of the private state thread, we try to drop
the run lock. That is appropriate for the main private state thread,
but not the secondary private state thread. Only the thread that
spawned them can know whether this is an appropriate thing to do or
not.
<rdar://problem/21375352>
llvm-svn: 240461
Enable ${language} to be specified in the frame-format string to see
the current frame's compile unit language in "frame info".
Test Plan:
debug a C++ program, run to main, and run the lldb commands:
settings set frame-format "frame lang=${language}\n"
frame info
you should see:
frame lang=c++
test case added in:
./dotest.py --executable lldb -f SettingsCommandTestCase.test_set_frame_format
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D10561
llvm-svn: 240440
SUMMARY:
This patch implements
1. Emulation of MIPS32 branch instructions
2. Enable single-stepping for MIPS32 instructions
3. Correction in emulation of MIPS64 branch instructions with delay slot
4. Adjust breakpoint address when breakpoint is hit in a forbidden slot of compact branch instruction
Reviewers: clayborg
Subscribers: mohit.bhakkad, sagar, bhushan, lldb-commits, emaste, nitesh.jain
Differential Revision: http://reviews.llvm.org/D10596
llvm-svn: 240373
We have been working on reducing the packet count that is sent between LLDB and the debugserver on MacOSX and iOS. Our approach to this was to reduce the packets required when debugging multiple threads. We currently make one qThreadStopInfoXXXX call (where XXXX is the thread ID in hex) per thread except the thread that stopped with a stop reply packet. In order to implement multiple thread infos in a single reply, we need to use structured data, which means JSON. The new jThreadsInfo packet will attempt to retrieve all thread infos in a single packet. The data is very similar to the stop reply packets, but packaged in JSON and uses JSON arrays where applicable. The JSON output looks like:
[
{ "tid":1580681,
"metype":6,
"medata":[2,0],
"reason":"exception",
"qaddr":140735118423168,
"registers": {
"0":"8000000000000000",
"1":"0000000000000000",
"2":"20fabf5fff7f0000",
"3":"e8f8bf5fff7f0000",
"4":"0100000000000000",
"5":"d8f8bf5fff7f0000",
"6":"b0f8bf5fff7f0000",
"7":"20f4bf5fff7f0000",
"8":"8000000000000000",
"9":"61a8db78a61500db",
"10":"3200000000000000",
"11":"4602000000000000",
"12":"0000000000000000",
"13":"0000000000000000",
"14":"0000000000000000",
"15":"0000000000000000",
"16":"960b000001000000",
"17":"0202000000000000",
"18":"2b00000000000000",
"19":"0000000000000000",
"20":"0000000000000000"},
"memory":[
{"address":140734799804592,"bytes":"c8f8bf5fff7f0000c9a59e8cff7f0000"},
{"address":140734799804616,"bytes":"00000000000000000100000000000000"}
]
}
]
It contains an array of dicitionaries with all of the key value pairs that are normally in the stop reply packet. Including the expedited registers. Notice that is also contains expedited memory in the "memory" key. Any values in this memory will get included in a new L1 cache in lldb_private::Process where if a memory read request is made and that memory request fits into one of the L1 memory cache blocks, it will use that memory data. If a memory request fails in the L1 cache, it will fall back to the L2 cache which is the same block sized caching we were using before these changes. This allows a process to expedite memory that you are likely to use and it reduces packet count. On MacOSX with debugserver, we expedite the frame pointer backchain for a thread (up to 256 entries) by reading 2 pointers worth of bytes at the frame pointer (for the previous FP and PC), and follow the backchain. Most backtraces on MacOSX and iOS now don't require us to read any memory!
We will try these packets out and if successful, we should port these to lldb-server in the near future.
<rdar://problem/21494354>
llvm-svn: 240354
Summary:
* Fix enum LanguageType values so that they can be used as indexes
into array language_names and g_languages as assumed by
LanguageRuntime::GetNameForLanguageType,
Language::SetLanguageFromCString and Language::AsCString.
* Add DWARFCompileUnit::LanguageTypeFromDWARF to convert from DWARF
DW_LANG_* values to enum LanguageType values.
Reviewed By: clayborg, abidh
Differential Revision: http://reviews.llvm.org/D10484
llvm-svn: 239963
Summary:
Memory reads using the ptrace API need to be executed on a designated thread
and in 4-byte increments. The process_vm_read syscall has no such requirements
and it is about 50 times faster. This patch makes lldb-server use the faster
API if the target kernel supports it. Kernel support for this feature is
determined at runtime. Using process_vm_writev in the same manner is more
complicated since this syscall (unlike ptrace) respects page protection settings
and so it cannot be used to set a breakpoint, since code pages are typically
read-only. However, memory writes are not currently a performance bottleneck as
they happen much more rarely.
Test Plan: all tests continue to pass
Reviewers: ovyalov, vharron
Subscribers: tberghammer, lldb-commits
Differential Revision: http://reviews.llvm.org/D10488
llvm-svn: 239924
Because vector types use their formats in special ways (i.e. children get generated based on them), this change by itself would cause a regression in printing vector types with some custom formats
Work around that issue by special casing vector types out of this format-passdown mode. I believe there is a more general feature to be designed in this space, but until I see more cases of interest, I am going to leave this as a special case
Fixes rdar://20810062
llvm-svn: 239873
Summary:
`IsRelativeToCurrentWorkingDirectory` was misleading, because relative paths
are sometimes appended to other directories, not just the cwd. Plus, the new
name is shorter. Also added `IsAbsolute` for completeness.
Reviewers: clayborg, ovyalov
Reviewed By: ovyalov
Subscribers: tberghammer, lldb-commits
Differential Revision: http://reviews.llvm.org/D10262
llvm-svn: 239419
Setting the OSType in the ArchSpec triple is needed to correctly setup
up the register context plugin. ArchSpec::SetArchitecture, for Mach-O
only, sets the OSType. For ELF it was left to the ObjectFileELF to fill
in the missing OSType.
This change moves the ObjectFileELF logic into ArchSpec.
A new optional 'os' parameter has been added to SetArchitecture.
For ELF, this value is the from the ELF header.e_ident[EI_OSABI].
The default value is 0 or ELFOSABI_NONE.
The real work of determining the OSType was done by the ObjectFileELF
helper function GetOsFromOSABI. This logic has been moved
SetArchitecture.
GetOsFromOSABI has been commented as being deprectated. It is left in
to support asserts.
For ELF the vendor value returned from SetArchitecture should be
UnknownVendor. An unneeded resetting in ObjectFileELF has been removed
and replaced with an assert.
This fixes a problem reading a core file on FreeBSD/ARM because the spec
triple was arm-unknown-unknown.
Patch by Tom Rix.
Differential Revision: http://reviews.llvm.org/D9292
llvm-svn: 239148
Summary:
Building the doxygen target presented some warnings which are now
addressed by this patch.
Test Plan: Ran doxygen build target and these warnings were no longer present.
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D10181
llvm-svn: 239055
This was of course overridable by using DumpValueObjectOptions, but the default should be saner and the previous behavior made for a few fun investigations....
rdar://problem/21065149
llvm-svn: 238961
Summary:
This should solve the issue of sending denormalized paths over gdb-remote
if we stick to GetPath(false) in GDBRemoteCommunicationClient, and let the
server handle any denormalization.
Reviewers: ovyalov, zturner, vharron, clayborg
Reviewed By: clayborg
Subscribers: tberghammer, emaste, lldb-commits
Differential Revision: http://reviews.llvm.org/D9728
llvm-svn: 238604
Summary:
Previously, we reported inferior receiving SIGSEGV (or SIGILL, SIGFPE, SIGBUS) as an "exception"
to LLDB, presumably to match OSX behaviour. Beside the fact that we were basically lying to the
user, this was also causing problems with inferiors which handle SIGSEGV by themselves, since
LLDB was unable to reinject this signal back into the inferior.
This commit changes LLGS to report SIGSEGV as a signal. This has necessitated some changes in the
test-suite, which had previously used eStopReasonException to locate threads that crashed. Now it
uses platform-specific logic, which in the case of linux searches for eStopReasonSignaled with
signal=SIGSEGV.
I have also added the ability to set the description of StopInfoUnixSignal using the description
field of the gdb-remote packet. The linux stub uses this to display additional information about
the segfault (invalid address, address access protected, etc.).
Test Plan: All tests pass on linux and osx.
Reviewers: ovyalov, clayborg, emaste
Subscribers: emaste, lldb-commits
Differential Revision: http://reviews.llvm.org/D10057
llvm-svn: 238549
it an extern "C" function instead of a C++ function
so that Clang doesn't emit a mangled function reference.
Also removed the hack in ClangExpressionDeclMap that
works around this.
llvm-svn: 238476
Summary:
LLDB on Windows should now be able to demangle Linux/Android symbols.
Also updated CxaDemangle.cpp to be compatible with MSVC.
Depends on D9949, D9954, D10048.
Reviewers: zturner, emaste, clayborg
Reviewed By: clayborg
Subscribers: tberghammer, lldb-commits
Differential Revision: http://reviews.llvm.org/D10040
llvm-svn: 238460
Summary: In preparation for some changes to make this compatible with MSVC.
Reviewers: emaste, zturner, clayborg
Reviewed By: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9949
llvm-svn: 238459
lldb::addr_t SBFrame::GetCFA();
This gets the CFA (call frame address) of the frame so it allows us to take an address that is on the stack and figure out which thread it comes from.
Also modified the heap.py module to be able to find out which variable in a frame's stack frame contains an address. This way when ptr_refs finds a match on the stack, it get then report which variable contains the pointer.
llvm-svn: 238393
expr_options = lldb.SBExpressionOptions()
expr_options.SetPrefix('''
struct Foo {
int a;
int b;
int c;
}
'''
expr_result = frame.EvaluateExpression ("Foo foo = { 1, 2, 3}; foo", expr_options)
This fixed a current issue with ptr_refs, cstr_refs and malloc_info so that they can work. If expressions define their own types and then return expression results that use those types, those types get copied into the target's AST context so they persist and the expression results can be still printed and used in future expressions. Code was added to the expression parser to copy the context in which types are defined if they are used as the expression results. So in the case of types defined by expressions, they get defined in a lldb_expr function and that function and _all_ of its statements get copied. Many types of statements are not supported in this copy (array subscript, lambdas, etc) so this causes expressions to fail as they can't copy the result types. To work around this issue I have added code that allows expressions to specify an expression specific prefix. Then when you evaluate the expression you can pass the "expr_options" and have types that can be correctly copied out into the target. I added this as a way to work around an issue, but I also think it is nice to be allowed to specify an expression prefix that can be reused by many expressions, so this feature is very useful.
<rdar://problem/21130675>
llvm-svn: 238365
This change also get rid of an unused Debugger instance in
GDBRemoteCommunicationServerLLGS and the command interpreter from
lldb-platform what was used only for enabling logging.
Differential revision: http://reviews.llvm.org/D9876
llvm-svn: 238319
Enrico Granata