debugserver had been using an instruction that would work
for armv7 or aarch64 processes, but we don't have armv7 code
running on arm64 devices any more so this is unnecessary.
<rdar://problem/56133118>
llvm-svn: 374264
Summary:
We mark debugserver_vers.c as a generated file in CMake. This means that when we run `ninja clean` we end up deleting that file,
but any following `ninja` invocation will fail due to the file missing. The file can't be generated as `ninja` doesn't know it has to
rerun CMake to create the file. Turns out that marking the output of configure_file as generated is wrong as explained in this bug report:
https://gitlab.kitware.com/cmake/cmake/issues/18032
This patch just removes that property. The only side effect of this seems to be that this file maybe shows up in your IDE when
opening our CMake project, but that seems like a small sacrifice.
This patch can be quickly tested by running `ninja clean ; ninja lldbDebugserverCommon`. Before this patch the build will fail
due to debugserver_vers.c missing.
Reviewers: JDevlieghere, labath
Reviewed By: labath
Subscribers: mgorny, abidh, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D68376
llvm-svn: 373723
When not running under a TTY the output is buffered and not flushed
before debugserver exits which makes it impossible to parse the version
string. This adds a -V/--version command that just prints the version to
stdout and exits with an exit code zero.
Differential revision: https://reviews.llvm.org/D68156
llvm-svn: 373127
r366433 broke support for the system debugserver. Although the change
was well-intended, it (presumably) unintentionally removed the logic to
copy over the debugserver. As a result, even with
LLDB_USE_SYSTEM_DEBUGSERVER enabled, we ended up building, signing and
using the just-built debugserver.
This patch partially recovers the old behavior: when
LLDB_USE_SYSTEM_DEBUGSERVER is set we don't build debugserver and just
copy over the system one.
Differential revision: https://reviews.llvm.org/D67991
llvm-svn: 372786
plugin.
Unfortunately the test is currently XFAILed because of missing changes
to the clang driver.
Differential Revision: https://reviews.llvm.org/D67124
llvm-svn: 370931
The flakiness on our local machines seems to come for a race in the kernel
between task_suspend and the creation of the Mach exceptions for the threads
that hit breakpoints. The debugserver code is written with the assumption
that the kernel will be able to provide us with all the exceptions for a
given task once task_suspend returns. On machines with higher core counts,
this seems not to be the case. The first batch of exceptions we get after
task_suspend does not contain exceptions for all the threads that have hit
a breakpoint, thus they get misreprorted in the first stop packet.
Adding a 1ms timeout to the call that retrieves the batch of exceptions
seems to workaround the issue reliably on our machines, and it shoulnd't
impact standard debugging scenarios too much (a stop will incur an additional
1ms delay). We'll be talking to the kernel team to figure out the right
contract for those APIs.
This patch also reverts part of Jonas' previous workaround for the
issue (r370785).
llvm-svn: 370916
Instead of using a magic return error code from debugserver to
indicate that an attach failed because of SIP being enabled in
RNBRemote::HandlePacket_v, use the extended error reporting that
Pavel added to lldb/lldb-server in https://reviews.llvm.org/D45573
<rdar://problem/39398385>
llvm-svn: 369990
Summary:
The former seems like it's not working on some platforms.
All the other uses use `llvm::`, so, let's change for consistency.
Reviewers: jasonmolenda, friss
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D66566
llvm-svn: 369618
This patch removes the two variant of StringExtractor::GetStringRef that
return (non-)const references to std::string. The non-const one was
being abused to reinitialize the StringExtractor and its uses are
replaced by calls to the copy asignment operator. The const variant was
refactored to return an actual llvm::StringRef.
llvm-svn: 369493
The implementation of this function was obviously incorrect, as the
result variable was never used. This led me to check if it was actually
used anywhere, which came back negative.
llvm-svn: 369492
Summary:
Explicitly code-sign the LLDB.framework copy of debugserver in the build-tree. This is necessary, because the Xcode-specific logic in `llvm_codesign` [1] has the side-effect that Xcode code-signs after post-build steps (here: after copying debugserver over into the framework). The special case for Xcode was necessary to avoid double-signing errors in the past (see D55116 and D55816).
[1] https://github.com/llvm/llvm-project/blob/36fb93982f0e/llvm/cmake/modules/AddLLVM.cmake#L1676
Reviewers: jingham, davide, JDevlieghere, teemperor
Reviewed By: JDevlieghere
Subscribers: beanz, mgorny, lldb-commits, #lldb
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D65566
llvm-svn: 368151
Adrian's changes to support Catalyst processes and my
changes to support debugserver running on an arm64_32
device (Apple Watch Series 4, which uses an IPL32 model
on arm64 cpus).
llvm-svn: 368118
Summary:
We can always build debugserver, but we can't always sign it to be useable for testing. `LLDB_USE_SYSTEM_DEBUGSERVER` should only tell whether or not the system debugserver should be used for testing.
The old behavior complicated the logic around debugserver a lot. The new logic sorts out most of it.
Please note that this patch is in early stage and needs some more testing. It should not affect platfroms other than Darwin. It builds on Davide's approach to validate the code-signing identity at configuration time.
What do you think?
Reviewers: xiaobai, JDevlieghere, davide, compnerd, friss, labath, mgorny, jasonmolenda
Reviewed By: JDevlieghere
Subscribers: lldb-commits, #lldb
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D64806
llvm-svn: 366433
Summary:
There's a number of requirements for installing LLDB on macOS that are untypical for LLVM projects: use special install-prefix for LLDB.framework, ship headers and tools as framework resources, patch RPATHs, externalize debug-info to dSYM's and strip binaries with `-ST`. For some of it we could use `llvm_externalize_debuginfo()` in the past and just add special cases. However, this complicates the code for all projects and comes with the major drawback, that it adds all these actions at build-time, i.e. dSYM creation and stripping take a lot of time and don't make sense at build-time.
LLVM's distribution mechanism (https://llvm.org/docs/BuildingADistribution.html) appears to be the natural candidate to install LLDB. Based on D64399 (enable in standalone builds), this patch integrates framework installation with the distribution mechanism and adds custom stripping flags and dSYM creation at install-time. Unlike the abandoned D61952, it leaves build-tree binaries untouched, so there's no side-effects on testing. Potential install-order issues must be handled externally.
Please let me know what you think, while I run a few more tests and add remarks+documentation.
Reviewers: xiaobai, compnerd, JDevlieghere, davide, labath, mgorny
Reviewed By: xiaobai, JDevlieghere
Subscribers: lldb-commits, #lldb
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D64408
llvm-svn: 365617
Summary:
Modify the way LLDB.framework tools are collected. This allows for better fine-tuning of the install behavior downstream. Each target calls `lldb_add_to_framework()` individually. When entering the function, the target exists and we can tweak its very own post-build and install steps. This was not possible with the old `LLDB_FRAMEWORK_TOOLS` approach.
No function change otherwise.
This is a reduced follow-up from the proposal in D61952.
Reviewers: xiaobai, compnerd, JDevlieghere
Reviewed By: JDevlieghere
Subscribers: clayborg, friss, ki.stfu, mgorny, lldb-commits, labath, #lldb
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D62472
llvm-svn: 361946
In an effort to help new LLDB developers, we added checks and messaging around
the selection of your codesigning identity on macOS. While helpful, it is not
actually correct. It's perfectly valid to codesign with an identity that is
not named lldb_codesign. Currently this fails the build.
This patch keeps a warning that informs developers how to setup lldb_codesign
and how to pass it to cmake, but it allows the build to proceed with a
different identity.
llvm-svn: 358525
A lot of comments in LLDB are surrounded by an ASCII line to delimit the
begging and end of the comment.
Its use is not really consistent across the code base, sometimes the
lines are longer, sometimes they are shorter and sometimes they are
omitted. Furthermore, it looks kind of weird with the 80 column limit,
where the comment actually extends past the line, but not by much.
Furthermore, when /// is used for Doxygen comments, it looks
particularly odd. And when // is used, it incorrectly gives the
impression that it's actually a Doxygen comment.
I assume these lines were added to improve distinguishing between
comments and code. However, given that todays editors and IDEs do a
great job at highlighting comments, I think it's worth to drop this for
the sake of consistency. The alternative is fixing all the
inconsistencies, which would create a lot more churn.
Differential revision: https://reviews.llvm.org/D60508
llvm-svn: 358135
Summary:
In 2010 (r118866), filtering code was added to debugserver to avoid reporting threads
that were "not ready to be displayed to the user". This code inspects the thread's
state and discards threads marked 'uninterruptible'. Turns out, this state is pretty
common and not only a characterisitic of 'user-readiness'. This filtering was tracked
down as the source of the flakiness of TestQueues and TestConcurrent* with the symptom
of missing threads.
We discussed with the kernel team and there should be no need for us to filter the
restult of task_threads(). Everything that is returned from there can be examined.
So I went on and tried to remove the filtering completely. This produces other test
failures, where we were reporting more theads than expected. Always threads that had
been terminated, but weren't removed from the task bookkeeping structures yet. Those
threads always had a PC of 0.
This patch changes the heuristic to make the filtering a little less strict and only
rejects threads that are 'uninteruptible' *and* have a PC of 0. This has proven to be
solid in my testing.
Reviewers: jasonmolenda, clayborg, jingham
Subscribers: jdoerfert, lldb-commits
Differential Revision: https://reviews.llvm.org/D58912
llvm-svn: 355555
unused IsSBProcess method, and have IsFBSProcess
return false if we don't have API that we can use to
make that determination, so we'll try other API
if we can.
llvm-svn: 354289
to a process so we'll always get messages in the console logs.
Also make the "is frontboard process" / "is backboard process"
determination lazy, specifically take it out of the
MachProcess::AttachForDebug codepath when we are attaching to a
process, to simplify attaching.
<rdar://problem/47982516>
<rdar://problem/48060134>
llvm-svn: 354181
The `ap` suffix is a remnant of lldb's former use of auto pointers,
before they got deprecated. Although all their uses were replaced by
unique pointers, some variables still carried the suffix.
In r353795 I removed another auto_ptr remnant, namely redundant calls to
::get for unique_pointers. Jim justly noted that this is a good
opportunity to clean up the variable names as well.
I went over all the changes to ensure my find-and-replace didn't have
any undesired side-effects. I hope I didn't miss any, but if you end up
at this commit doing a git blame on a weirdly named variable, please
know that the change was unintentional.
llvm-svn: 353912
Unlike std::make_unique, which is only available since C++14,
std::make_shared is available since C++11. Not only is std::make_shared
a lot more readable compared to ::reset(new), it also performs a single
heap allocation for the object and control block.
Differential revision: https://reviews.llvm.org/D57990
llvm-svn: 353764
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Summary:
The flags `LLDB_USE_SYSTEM_DEBUGSERVER` and `LLDB_NO_DEBUGSERVER` were
introduced to the debugserver build. If one of these two flags are set, then we
do not build and sign debugserver. However I noticed that we were still building
the lldbDebugserverCommon and lldbDebugserverCommon_NonUI libraries regardless
of whether or not these flags were set. I don't believe we should be building
these libraries unless we are building and signing debugserver.
Reviewers: sgraenitz, davide, JDevlieghere, beanz, vsk, aprantl, labath
Subscribers: mgorny, jfb, lldb-commits
Differential Revision: https://reviews.llvm.org/D56763
llvm-svn: 351496
This has been commented out since rL300111
(commit d742d081f3a1e7412cc609765139ba32d597ac15). Looks like it was
committed as a commented out line, so I'm removing it.
llvm-svn: 351263
Summary:
Add features to LLDB CMake builds that have so far only been available in Xcode. Clean up a few inconveniences and prepare further improvements.
Options:
* `LLDB_FRAMEWORK_BUILD_DIR` determines target directory (in build-tree)
* `LLDB_FRAMEWORK_INSTALL_DIR` **only** determines target directory in install-tree
* `LLVM_EXTERNALIZE_DEBUGINFO` allows externalized debug info (dSYM on Darwin, emitted to `bin`)
* `LLDB_FRAMEWORK_TOOLS` determines which executables will be copied to the framework's Resources (dropped symlinking, removed INCLUDE_IN_SUITE, removed dummy targets)
Other changes:
* clean up `add_lldb_executable()`
* include `LLDBFramework.cmake` from `source/API/CMakeLists.txt`
* use `*.plist.in` files, which are typical for CMake and independent from Xcode
* add clang headers to the framework bundle
Reviewers: xiaobai, JDevlieghere, aprantl, davide, beanz, stella.stamenova, clayborg, labath
Reviewed By: aprantl
Subscribers: friss, mgorny, lldb-commits, #lldb
Differential Revision: https://reviews.llvm.org/D55328
llvm-svn: 350391
Jason Molenda