* Assume that clang passes non-zero alignment value to DIBuilder
only in case when it was forced by C++11 'alignas', C11 '_Alignas'
or compiler attribute '__attribute__((aligned (N)))'.
* Emit DW_AT_alignment if alignment is specified for type/object.
Differential Revision: https://reviews.llvm.org/D24425
llvm-svn: 285189
* Assume that clang passes non-zero alignment value to DIBuilder
only in case when it was forced by C++11 'alignas', C11 '_Alignas'
or compiler attribute '__attribute__((aligned (N)))'.
* Emit DW_AT_alignment if alignment is specified for type/object.
Differential Revision: https://reviews.llvm.org/D24425
llvm-svn: 285181
This patch updates some of the existing Error examples, expands on the
documentation for handleErrors, and includes new sections that cover
a number of helpful utilities and common error usage idioms.
llvm-svn: 285122
Summary:
The RFC proposal sent to increase the minimum required GCC version
to 4.8 received a lot of support. See the following thread:
http://lists.llvm.org/pipermail/llvm-dev/2016-October/105955.html,
This patch implements that by updating the docs. I believe the
references to libstdc++ 4.7 issues can be removed as well, please
let me know if that is not the case or if they should be updated
a different way.
Reviewers: rengolin
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25683
llvm-svn: 284497
Uses of this have all been updated to use LLVM_NODISCARD, which
matches the C++17 [[nodiscard]] semantics rather than those of GCC's
__attribute__((warn_unused_result)).
llvm-svn: 284367
Summary:
* Describe new (3.3) parameter attribute group encoding, leaving old encoding there with a note about legacy
* Bring TYPE_BLOCK docs up to date
* Remove docs about obsolete (pre 3.0) TYPE_SYMTAB_BLOCK, TST_CODE_ENTRY
* Fix a couple of incorrect comments and remove one unused enum definition along the way
This addresses https://llvm.org/bugs/show_bug.cgi?id=28941.
Patch by: Ismail Badawi <ibadawi@cisco.com>
Differential Revision: https://reviews.llvm.org/D25623
llvm-svn: 284246
Added relocation names:
- R_AMDGPU_GOTPCREL32_LO
- R_AMDGPU_GOTPCREL32_HI
- R_AMDGPU_REL32_LO
- R_AMDGPU_REL32_HI
AMDGPU isa only supports 32-bit immediates. In order to access 64-bit address we need to generate 32-bit lo/hi relocations, and do the right math (separate patch). Currently we only generate one 32 bit relocation for lower bits for each access, losing higher bits. Hence we need relocations listed above.
Differential Revision: https://reviews.llvm.org/D25546
llvm-svn: 284191
This document describes the proposal to move to GitHub, and
compare the two proposals through various workflow examples,
presenting the current set of commands following by the ones
involved in each of the two proposals.
It is intended to supersede the previous "submodule proposal"
document entirely, and drive the discussion at the BoF during
the next Dev Meeting.
Differential Revision: https://reviews.llvm.org/D24167
llvm-svn: 284077
Summary: We need a new LLVM intrinsic to implement MS _AddressOfReturnAddress builtin on 64-bit Windows.
Reviewers: majnemer, rnk
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25293
llvm-svn: 284061
The core of the change is supposed to be NFC, however it also fixes
what I believe was an undefined behavior when calling:
va_start(ValueArgs, Desc);
with Desc being a StringRef.
Differential Revision: https://reviews.llvm.org/D25342
llvm-svn: 283671
Summary:
The acronym PR could be ambiguous to some users, especially those who
are used to interpreting it as GitHub's "pull request".
Reviewers: ddunbar, jordan_rose, void, beanz
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25331
llvm-svn: 283465
Support overriding the Doxygen & OCamldoc install directories,
and provide a more FHS-compliant defaults for both of them. This extends
r282240 that added this override for Sphinx-built documentation.
LLVM_INSTALL_DOXYGEN_HTML_DIR and LLVM_INSTALL_OCAMLDOC_HTML_DIR are
added, to control the location where Doxygen-generated and
OCamldoc-generated HTML docs are installed appropriately. They both
specify CMake-style install paths, and therefore can either by relative
to the install prefix or absolute.
The new defaults are subdirectories of share/doc/llvm, and replace
the previous directories of 'docs/html' and 'docs/ocaml/html' that
resulted in creating invalid '/usr/docs' that furthermore lacked proper
namespacing for the LLVM package. The new defaults are consistent with
the ones used for Sphinx HTML documentation, differing only in the last
component. Since the 'html' subdirectory is already used for Sphinx
docs, the 'doxygen-html' and 'ocaml-html' directories are used instead.
Differential Revision: https://reviews.llvm.org/D24935
llvm-svn: 282536
This patch updates WritingAnLLVMPass.rst to make it in line with current state of things.
Specifically:
* Makefile instructions replaced with CMake ones
* Filenames replaced with correct ones
* Example reformatted a bit to make it less confusing and more conforming to LLVM Coding Standards
* opt tool output updated with what it actually prints nowdays
* "gcse" (which doesn't exist anymore) replaced with "gvn" (which still does)
Differential Revision: https://reviews.llvm.org/D24233
llvm-svn: 282482
Summary:
Add links to ISA manuals and ABI.
Add text about assembler syntax.
Add info about instructions operands.
Add instruction examples for each encoding.
Update directives section, add missing .amdgpu_hsa_kernel.
Reviewers: tstellarAMD, SamWot, vpykhtin
Subscribers: kzhuravl, wdng, nhaehnle, yaxunl, tony-tye, artem.tamazov, llvm-commits
Differential Revision: https://reviews.llvm.org/D24724
llvm-svn: 281962
Summary:
It was previously not possible for tools to use solely the stackmap
information emitted to reconstruct the return addresses of callsites in
the map, which is necessary to use the information to walk a stack. This
patch adds per-function callsite counts when emitting the stackmap
section in order to resolve the problem. Note that this slightly alters
the stackmap format, so external tools parsing these maps will need to
be updated.
**Problem Details:**
Records only store their offset from the beginning of the function they
belong to. While these records and the functions are output in program
order, it is not possible to determine where the end of one function's
records are without the callsite count when processing the records to
compute return addresses.
Patch by Kavon Farvardin!
Reviewers: atrick, ributzka, sanjoy
Subscribers: nemanjai
Differential Revision: https://reviews.llvm.org/D23487
llvm-svn: 281532
On Windows, it is often applied to the second parameter, and the x86
backend is prepared to deal with sret appearing on any parameter.
Other backends assume it only appears on parameter zero, but those are
target-specific requirements, and not an IR-level rule.
llvm-svn: 280951
No need to have a long inline code snippet in this doc.
Also move "flags that control numerical code" underneath the "invoking
clang" section, and reformat things a bit.
llvm-svn: 280857
CUDA is an extension to C++ -- there is no such thing as "CUDA C". But
also, the language is much more commonly called "CUDA" than "CUDA C++".
llvm-svn: 280849
auto-brief format for doxygen comments. Most notable is switching to
that in the example doxygen comment. I've also tweaked the wording but
am happy to tweak it further if others have suggestions here.
Mostly doing this to capture something I and others have been writing
consistently and repeatedly in code reviews.
llvm-svn: 280419
This is a partial revert of r280013. Brad King pointed out these variable names are matching CMake conventions, so we should preserve them.
I've also added a direct mapping of the LLVM_*_DIR variables which we need to make projects support building in and out of tree.
llvm-svn: 280380
I've found this out the hard way; LLVM will not normally catch this
error (unless -verify-machineinstrs is passed), and under certain
very specific circumstances (such as register scavenger running
under pressure) this would result in an opaque crash in codegen.
llvm-svn: 280071
With the runtimes build we're trying to use LLVMConfig.cmake as a way of providing LLVM_* variables that are needed to behave as if the project is building in tree. To make this work we need to rename two variables by dropping the "S" from the end. This makes the variables match the in-tree names.
This renames:
LLVM_INCLUDE_DIRS -> LLVM_INCLUDE_DIR
LLVM_LIBRARY_DIRS -> LLVM_LIBRARY_DIR
The versions ending in S are not used in-tree anywhere. This also cleans up LLVM_LIBRARY_DIR being set to the same value with and without the "S".
llvm-svn: 280013
Summary:
[Coroutines] Part 9: Add cleanup subfunction.
This patch completes coroutine heap allocation elision. Now, the heap elision example from docs\Coroutines.rst compiles and produces expected result (see test/Transform/Coroutines/ex3.ll)
Intrinsic Changes:
* coro.free gets a token parameter tying it to coro.id to allow reliably discovering all coro.frees associated with a particular coroutine.
* coro.id gets an extra parameter that points back to a coroutine function. This allows to check whether a coro.id describes the enclosing function or it belongs to a different function that was later inlined.
CoroSplit now creates three subfunctions:
# f$resume - resume logic
# f$destroy - cleanup logic, followed by a deallocation code
# f$cleanup - just the cleanup code
CoroElide pass during devirtualization replaces coro.destroy with either f$destroy or f$cleanup depending whether heap elision is performed or not.
Other fixes, improvements:
* Fixed buglet in Shape::buildFrame that was not creating coro.save properly if coroutine has more than one suspend point.
* Switched to using variable width suspend index field (no longer limited to 32 bit index field can be as little as i1 or as large as i<whatever-size_t-is>)
Reviewers: majnemer
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D23844
llvm-svn: 279971
Primarily, this clarifies wording in a few places, and adds "\ "s to
make the formatting of things like "``Foo`` s" better.
Thanks to Michael Kuperstein for the comments.
llvm-svn: 279007
Making explicit our current policy to accept new targets as experimental and
later official. Every new target should follow these rules to be added,
and kept relevant in the upstream tree.
llvm-svn: 278971
The statement on using #if 0 ... #endif is not very clear (for people like me
:-)). This patch clarifies it a bit to avoid confusion.
Differential Revision: https://reviews.llvm.org/D23404
llvm-svn: 278932
Summary:
1. Make coroutine representation more robust against optimization that may duplicate instruction by introducing coro.id intrinsics that returns a token that will get fed into coro.alloc and coro.begin. Due to coro.id returning a token, it won't get duplicated and can be used as reliable indicator of coroutine identify when a particular coroutine call gets inlined.
2. Move last three arguments of coro.begin into coro.id as they will be shared if coro.begin will get duplicated.
3. doc + test + code updated to support the new intrinsic.
Reviewers: mehdi_amini, majnemer
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D23412
llvm-svn: 278481
Summary:
A particular coroutine usage pattern, where a coroutine is created, manipulated and
destroyed by the same calling function, is common for coroutines implementing
RAII idiom and is suitable for allocation elision optimization which avoid
dynamic allocation by storing the coroutine frame as a static `alloca` in its
caller.
coro.free and coro.alloc intrinsics are used to indicate which code needs to be suppressed
when dynamic allocation elision happens:
```
entry:
%elide = call i8* @llvm.coro.alloc()
%need.dyn.alloc = icmp ne i8* %elide, null
br i1 %need.dyn.alloc, label %coro.begin, label %dyn.alloc
dyn.alloc:
%alloc = call i8* @CustomAlloc(i32 4)
br label %coro.begin
coro.begin:
%phi = phi i8* [ %elide, %entry ], [ %alloc, %dyn.alloc ]
%hdl = call i8* @llvm.coro.begin(i8* %phi, i32 0, i8* null,
i8* bitcast ([2 x void (%f.frame*)*]* @f.resumers to i8*))
```
and
```
%mem = call i8* @llvm.coro.free(i8* %hdl)
%need.dyn.free = icmp ne i8* %mem, null
br i1 %need.dyn.free, label %dyn.free, label %if.end
dyn.free:
call void @CustomFree(i8* %mem)
br label %if.end
if.end:
...
```
If heap allocation elision is performed, we replace coro.alloc with a static alloca on the caller frame and coro.free with null constant.
Also, we need to make sure that if there are any tail calls referencing the coroutine frame, we need to remote tail call attribute, since now coroutine frame lives on the stack.
Documentation and overview is here: http://llvm.org/docs/Coroutines.html.
Upstreaming sequence (rough plan)
1.Add documentation. (https://reviews.llvm.org/D22603)
2.Add coroutine intrinsics. (https://reviews.llvm.org/D22659)
3.Add empty coroutine passes. (https://reviews.llvm.org/D22847)
4.Add coroutine devirtualization + tests.
ab) Lower coro.resume and coro.destroy (https://reviews.llvm.org/D22998)
c) Do devirtualization (https://reviews.llvm.org/D23229)
5.Add CGSCC restart trigger + tests. (https://reviews.llvm.org/D23234)
6.Add coroutine heap elision + tests. <= we are here
7.Add the rest of the logic (split into more patches)
Reviewers: mehdi_amini, majnemer
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D23245
llvm-svn: 278242
This reverts commit r278048. Something changed between the last time I
built this--it takes awhile on my ridiculously slow and ancient
computer--and now that broke this.
llvm-svn: 278053
Summary:
Based on two patches by Michael Mueller.
This is a target attribute that causes a function marked with it to be
emitted as "hotpatchable". This particular mechanism was originally
devised by Microsoft for patching their binaries (which they are
constantly updating to stay ahead of crackers, script kiddies, and other
ne'er-do-wells on the Internet), but is now commonly abused by Windows
programs to hook API functions.
This mechanism is target-specific. For x86, a two-byte no-op instruction
is emitted at the function's entry point; the entry point must be
immediately preceded by 64 (32-bit) or 128 (64-bit) bytes of padding.
This padding is where the patch code is written. The two byte no-op is
then overwritten with a short jump into this code. The no-op is usually
a `movl %edi, %edi` instruction; this is used as a magic value
indicating that this is a hotpatchable function.
Reviewers: majnemer, sanjoy, rnk
Subscribers: dberris, llvm-commits
Differential Revision: https://reviews.llvm.org/D19908
llvm-svn: 278048
Summary:
Currently, the Scudo Hardened Allocator only gets its flags via the SCUDO_OPTIONS environment variable.
With this patch, we offer the opportunity for programs to define their own options via __scudo_default_options() which behaves like __asan_default_options() (weak symbol).
A relevant test has been added as well, and the documentation updated accordingly.
I also used this patch as an opportunity to rename a few variables to comply with the LLVM naming scheme, and replaced a use of Report with dieWithMessage for consistency (and to avoid a callback).
Reviewers: llvm-commits, kcc
Differential Revision: https://reviews.llvm.org/D23018
llvm-svn: 277536
Victor Leschuk