This change introduces optional marking of the column within a source
line where a thread is stopped. This marking will show up when the
source code for a thread stop is displayed, when the debug info
knows the column information, and if the optional column marking is
enabled.
There are two separate methods for handling the marking of the stop
column:
* via ANSI terminal codes, which are added inline to the source line
display. The default ANSI mark-up is to underline the column.
* via a pure text-based caret that is added in the appropriate column
in a newly-inserted blank line underneath the source line in
question.
There are some new options that control how this all works.
* settings set stop-show-column
This takes one of 4 values:
* ansi-or-caret: use the ANSI terminal code mechanism if LLDB
is running with color enabled; if not, use the caret-based,
pure text method (see the "caret" mode below).
* ansi: only use the ANSI terminal code mechanism to highlight
the stop line. If LLDB is running with color disabled, no
stop column marking will occur.
* caret: only use the pure text caret method, which introduces
a newly-inserted line underneath the current line, where
the only character in the new line is a caret that highlights
the stop column in question.
* none: no stop column marking will be attempted.
* settings set stop-show-column-ansi-prefix
This is a text format that indicates the ANSI formatting
code to insert into the stream immediately preceding the
column where the stop column character will be marked up.
It defaults to ${ansi.underline}; however, it can contain
any valid LLDB format codes, e.g.
${ansi.fg.red}${ansi.bold}${ansi.underline}
* settings set stop-show-column-ansi-suffix
This is the text format that specifies the ANSI terminal
codes to end the markup that was started with the prefix
described above. It defaults to: ${ansi.normal}. This
should be sufficient for the common cases.
Significant leg-work was done by Adrian Prantl. (Thanks, Adrian!)
differential review: https://reviews.llvm.org/D20835
reviewers: clayborg, jingham
llvm-svn: 282105
load commands. Added a missing check and made the check for more than
one like other other “more than one” checks. And of course added test cases.
llvm-svn: 282104
Currently, we give up on loop interchange if we encounter a flow dependency
anywhere in the loop list. Worse yet, we don't even track output dependencies.
This patch updates the dependency matrix computation to track flow and output
dependencies in the same way we track anti dependencies.
This improves an internal workload by 2.2x.
Note the loop interchange pass is off by default and it can be enabled with
'-mllvm -enable-loopinterchange'
Differential Revision: https://reviews.llvm.org/D24564
llvm-svn: 282101
With the new LTO API in r278338, we stopped emitting the individual
index files and imports files for some modules in the distributed backend
case (thinlto-index-only plugin option).
Specifically, this is when the linker decides not to include a module in the
link, because it was in an archive library and did not have a strong
reference to it. Not creating the expected output files makes the
distributed build system implementation more difficult, in terms of
checking for the expected outputs of the thin link, and scheduling the
backend jobs. To address this, the gold-plugin will write dummy empty
.thinlto.bc and .imports files for modules not included in the link
(which LTO never sees).
Augmented a gold v1.12+ test, since that version of gold has the handling
for notifying on modules not being included in the link.
llvm-svn: 282100
The actual logic is to keep the output section if the output section
would have been ro/rw.
This is both simpler and more practical, as the intention is linker
scripts is to always keep of of a pair of ONLY_IF_RO/ONLY_IF_RW.
llvm-svn: 282099
r282079 converted the regular expression interface to accept
and return StringRefs instead of char pointers. In one case
a null pointer check was converted to an empty string check,
but this was an incorrect conversion because an empty string
is a valid regular expression. Removing this check should
fix the test failures.
llvm-svn: 282090
Summary: Add some user facing documentation on ThinLTO and how to use it.
Reviewers: mehdi_amini
Subscribers: mehdi_amini, cfe-commits
Differential Revision: https://reviews.llvm.org/D24806
llvm-svn: 282089
If we identify an instruction as uniform after vectorization, we know that we
should only use the value corresponding to the first vector lane of each unroll
iteration. However, when scalarizing such instructions, we still produce values
for the other vector lanes. This patch prevents us from generating the unused
scalars.
Differential Revision: https://reviews.llvm.org/D24275
llvm-svn: 282087
Summary:
The dynamic shadow code is not detected correctly on Android.
The android shadow seems to start at address zero.
The bug is introduced here:
https://reviews.llvm.org/D23363
Started here: https://build.chromium.org/p/chromium.fyi/builders/ClangToTAndroidASan/builds/4029
Likely due to an asan runtime change, filed https://llvm.org/bugs/show_bug.cgi?id=30462
From asan_mapping.h:
```
#if SANITIZER_WORDSIZE == 32
# if SANITIZER_ANDROID
# define SHADOW_OFFSET (0) <<---- HERE
# elif defined(__mips__)
```
Shadow address on android is 0.
From asan_rtl.c:
```
if (shadow_start == 0) {
[...]
shadow_start = FindAvailableMemoryRange(space_size, alignment, granularity);
}
```
We assumed that 0 is dynamic address.
On windows, the address was determined with:
```
# elif SANITIZER_WINDOWS64
# define SHADOW_OFFSET __asan_shadow_memory_dynamic_address
# else
```
and __asan_shadow_memory_dynamic_address is initially zero.
Reviewers: rnk, eugenis, vitalybuka
Subscribers: kcc, tberghammer, danalbert, kubabrecka, dberris, llvm-commits, chrisha
Differential Revision: https://reviews.llvm.org/D24768
llvm-svn: 282085
Summary: Now that we have more precise debug info, we should change back to use maximum to get basic block weight.
Reviewers: dnovillo
Subscribers: andreadb, llvm-commits
Differential Revision: https://reviews.llvm.org/D24788
llvm-svn: 282084
The return types on the AVX512 __builtin_ia32_gather3XivXdi builtins are incorrect. The return type should match the type of the pass through vector.
Differential Revision: https://reviews.llvm.org/D24785
-This line, and those below, will be ignored--
M include/clang/Basic/BuiltinsX86.def
llvm-svn: 282082
This updates getters and setters to use StringRef instead of
const char *. I tested the build on Linux, Windows, and OSX
and saw no build or test failures. I cannot test any BSD
or Android variants, however I expect the required changes
to be minimal or non-existant.
llvm-svn: 282079
This is PR30442.
Previously we were failed to parce complex expressions like:
foo : { *(SORT_BY_NAME(bar) zed) }
Main idea of patch that globs and excludes can be wrapped in a SORT.
There is a difference in semanics of ld/gold:
ld likes:
*(SORT(EXCLUDE_FILE (*file1.o) .foo.1))
gold likes:
*(EXCLUDE_FILE (*file1.o) SORT(.foo.1))
Patch implements ld grammar, complex expressions like
next is not a problem anymore:
.abc : { *(SORT(.foo.* EXCLUDE_FILE (*file1.o) .bar.*) .bar.*) }
Differential revision: https://reviews.llvm.org/D24758
llvm-svn: 282078
This patch refactors the way the XState type is checked and, in order to
simplify the code, it removes the usage of the 'cpuid' instruction: just checking
if the ptrace calls done throuhg ReadFPR is enough to verify both if there is
HW support and if there is kernel support. Also the XCR0 bits are enough to check if
there is both HW and kernel support for AVX and MPX.
Differential Revision: https://reviews.llvm.org/D24764
llvm-svn: 282072
Summary:
This patch introduces a new tool which moves a specific class definition
from files (.h, .cc) to new files (.h, .cc), which mostly acts like
"Extract class defintion". In the long term, this tool should be
merged in to clang-refactoring as a subtool.
clang-move not only moves class definition, but also moves all the
forward declarations, functions defined in anonymous namespace and #include
headers to new files, to make sure the new files are compliable as much
as possible.
To move `Foo` from old.[h/cc] to new.[h/cc], use:
```
clang-move -name=Foo -old_header=old.h -old_cc=old.cc -new_header=new.h
-new_cc=new.cc old.cc
```
To move `Foo` from old.h to new.h, use:
```
clang-move -name=Foo -old_header=old.h -new_header=new.h old.cc
```
Reviewers: klimek, djasper, ioeric
Subscribers: mgorny, beanz, Eugene.Zelenko, bkramer, omtcyfz, cfe-commits
Differential Revision: https://reviews.llvm.org/D24243
llvm-svn: 282070
We still don't really have an equivalent of "AssertXExt" in DAG, so we don't
exploit the guarantees on the receiving side yet, but this should produce
conservatively correct code on iOS ABIs.
llvm-svn: 282069
The only implementation that exists immediately looks it up anyway, and the
information is needed to handle various parameter attributes (stored on the
function itself).
llvm-svn: 282068
When final image has several .bss sections, lld fails
because second .bss always has zero VA. This causes
link error "Not enough space for ELF and program headers"
llvm-svn: 282067
The postRA scheduler performs alias analysis to determine if stores and loads
can moved past each other. When a function has more arguments than argument
registers for the calling convention used, excess arguments are spilled onto the
stack. LLVM by default assumes that argument slots are immutable, unless the
function contains a tail call. Without the knowledge of that a function contains
a tail call site, stores and loads to fixed stack slots may be re-ordered
causing the out-going arguments to clobber the incoming arguments before the
incoming arguments are supposed to be dead.
Reviewers: vkalintiris
Differential Review: https://reviews.llvm.org/D24077
llvm-svn: 282063
One of the tests relying on sem_t's layout gets the wrong value for versions of
glibc newer than 2.21 on platforms that don't have 64-bit atomics (e.g. ARM).
This commit fixes the test to work with:
* versions of glibc >= 2.21 on platforms with 64-bit atomics: unchanged
* versions of glibc >= 2.21 on platforms without 64-bit atomics: the semaphore
value is shifted by SEM_VALUE_SHIFT (which is set to 1 in glibc's internal
headers)
* versions of glibc < 2.21: unchanged
See the glibc 2.23 sources:
* sysdeps/nptl/internaltypes.h (struct new_sem for glibc >= 2.21 and
struct old_sem for glibc < 2.21)
* nptl/sem_getvalue.c
This was uncovered on one of the new buildbots that we are trying to move to
production.
Differential Revision: https://reviews.llvm.org/D24766
llvm-svn: 282061
It is not only a bit more straightforward now, but also next 2 issues are solved:
* It just crashed on ".foo : { *(EXCLUDE_FILE (*file1.o)) }" before.
* It accepted multiple EXCLUDE_FILEs in a row.
Differential revision: https://reviews.llvm.org/D24726
llvm-svn: 282060
Summary: AArch64 LLVM assembler emits add instruction without shift bit to calculate the higher 12-bit address of TLS variables in local exec model. This generates wrong code sequence to access TLS variables with thread offset larger than 0x1000.
Reviewers: t.p.northover, peter.smith, rovka
Subscribers: salim.nasser, aemerson, llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D24702
llvm-svn: 282057
Summary: @returns is incorrect code, the standard is @return. However wrapping it can still confuse users.
Reviewers: djasper
Subscribers: klimek, cfe-commits
Differential Revision: https://reviews.llvm.org/D24767
llvm-svn: 282056
It turns out isel is really not robust against having different type profiles for the same opcode. It turns out that if you put an illegal rounding mode(i.e. not CUR_DIRECTION or NO_EXC) on a comiss intrinsic we would generate the FSETCC form with the rounding mode added, but then pattern match to an instruction with ROUND_CUR_DIRECTION.
We can probably get away with just one FSETCCM opcode that always contains the rounding mode and explicitly put ROUND_CUR_DIRECTION in the pattern, but I'll leave that for future work.
With this change the clang tests for the comiss intrinsics that used an incorrect rounding mode of 3 properly fail isel instead of silently doing the wrong thing. Those clang tests will be fixed in a follow up commit and I also plan to add rounding mode checking to clang.
llvm-svn: 282055
Jan Vesely