Adding NonNull as attributes to returned pointers has the unfortunate side
effect of disabling tail calls. This patch ignores the NonNull attribute when
we decide whether to tail merge, in the same way that we ignore the NoAlias
attribute, as it has no affect on the call sequence.
Differential Revision: https://reviews.llvm.org/D52238
llvm-svn: 343091
CodeGenPrepare has a transform that sinks {lshr, trunc} pairs to make it
easier for the backend to emit fancy extract-bits instructions (e.g UBFX).
Teach it to preserve debug locations and salvage debug values.
llvm-svn: 342319
The output of splitLargeGEPOffsets does not appear to be deterministic because
of the way that we iterate over a DenseMap. I've changed it to a MapVector for
consistent output.
The test here isn't particularly great, only showing a consmetic difference in
output. The original reproducer is much larger but show a diffierence in
instruction ordering, leading to different codegen.
Differential Revision: https://reviews.llvm.org/D51851
llvm-svn: 342043
This causes crashes due to the interleaved dbg.value intrinsics being
left at the end of basic blocks, causing the actual terminators (br,
etc) to be not where they should be (not at the end of the block),
leading to later crashes.
Further discussion on the original commit thread.
This reverts commit r340368.
llvm-svn: 340794
CodeGenPrepare has a strategy for moving dbg.values so that a value's
definition always dominates its debug users. This cleanup was happening
too early (before certain CGP transforms were run), resulting in some
dbg.value use-before-def errors.
Perform this cleanup as late as possible to avoid use-before-def.
llvm-svn: 340370
In optimizeSelectInst, when scanning for candidate selects to rewrite
into branches, scan past debug intrinsics. This makes the debug-enabled
and non-debug paths through optimizeSelectInst more congruent.
NFC because every select is eventually visited either way.
llvm-svn: 340368
This patch fixes PR38125.
Instruction extension types are recorded in PromotedInsts, it can be used later in function canGetThrough. If an instruction has two users with different extension types, it will be inserted into PromotedInsts two times in function promoteOperandForOther. The second one overwrites the first one, and the final extension type is wrong, later causes problem in canGetThrough.
This patch changes the simple bool extension type to 2-bit enum type, add a BothExtension type in addition to zero/sign extension. When an user sees BothExtension for an instruction, it actually knows nothing about how that instruction is extended.
Differential Revision: https://reviews.llvm.org/D49512
llvm-svn: 339822
This fixes an inconsistency in code generation when compiling with or
without debug information (-g). When debug information is available in
an empty block, the original test would fail, resulting in possibly
different code.
Patch by: Jeroen Dobbelaere
Differential revision: https://reviews.llvm.org/D49467
llvm-svn: 339129
It's a bit neater to write T.isIntOrPtrTy() over `T.isIntegerTy() ||
T.isPointerTy()`.
I used Python's re.sub with this regex to update users:
r'([\w.\->()]+)isIntegerTy\(\)\s*\|\|\s*\1isPointerTy\(\)'
llvm-svn: 336462
Summary:
Replace use of a SmallPtrSet with a SmallSetVector to make the worklist
iteration order deterministic. This is done as the order the blocks are
removed may affect whether or not PHI nodes in successor blocks are
removed.
For example, consider the following case where %bb1 and %bb2 are
removed:
bb1:
br i1 undef, label %bb3, label %bb4
bb2:
br i1 undef, label %bb4, label %bb3
bb3:
pv1 = phi type [ undef, %bb1 ], [ undef, %bb2], [ v0, %other ]
br label %bb4
bb4:
pv2 = phi type [ undef, %bb1 ], [ undef, %bb2 ],
[ pv1, %bb3 ], [ v0, %other ]
If %bb2 is removed before %bb1, the incoming values from %bb1 and %bb2
to pv1 will be removed before %bb1 is removed as a predecessor to %bb4.
The pv1 node will thus be optimized out (to v0) at the time %bb1 is
removed as a predecessor to %bb4, leaving the blocks as following when
the incoming value from %bb1 has been removed:
bb3: ; pv1 optimized out, incoming value to pv2 is v0
br label %bb4
bb4:
pv2 = phi type [ v0, %bb3 ], [ v0, %other ]
The pv2 PHI node will be optimized away by removePredecessor() as all
incoming values are identical.
In case %bb2 is removed after %bb1, pv1 will not be optimized out at the
time %bb2 is removed as a predecessor to %bb4, leaving the blocks as
following when the incoming value from %bb2 to pv2 has been removed:
bb3:
pv1 = phi type [ undef, %bb2 ], [ v0, %other ]
br label %bb4
bb4:
pv2 = phi type [ pv1, %bb3 ], [ v0, %other ]
The pv2 PHI node will thus not be removed in this case, ultimately
leading to the following output
bb3: ; pv1 optimized out, incoming value to pv2 is v0
br label %bb4
bb4:
pv2 = phi type [ v0, %bb3 ], [ v0, %other ]
I have not looked into changing DeleteDeadBlock() so that the redundant
PHI nodes are removed.
I have not added a test case, as I was not able to create a particularly
small and (not messy) reproducer. This is likely due to SmallPtrSet
behaving deterministically when in small mode.
Reviewers: void, dexonsmith, spatel, skatkov, fhahn, bkramer, nhaehnle
Reviewed By: fhahn
Subscribers: mgrang, llvm-commits
Differential Revision: https://reviews.llvm.org/D48369
llvm-svn: 336109
Summary:
This patch introduce new intrinsic -
strip.invariant.group that was described in the
RFC: Devirtualization v2
Reviewers: rsmith, hfinkel, nlopes, sanjoy, amharc, kuhar
Subscribers: arsenm, nhaehnle, JDevlieghere, hiraditya, xbolva00, llvm-commits
Differential Revision: https://reviews.llvm.org/D47103
Co-authored-by: Krzysztof Pszeniczny <krzysztof.pszeniczny@gmail.com>
llvm-svn: 336073
Summary:
Two utils methods have essentially the same functionality. This is an attempt to merge them into one.
1. lib/Transforms/Utils/Local.cpp : MergeBasicBlockIntoOnlyPred
2. lib/Transforms/Utils/BasicBlockUtils.cpp : MergeBlockIntoPredecessor
Prior to the patch:
1. MergeBasicBlockIntoOnlyPred
Updates either DomTree or DeferredDominance
Moves all instructions from Pred to BB, deletes Pred
Asserts BB has single predecessor
If address was taken, replace the block address with constant 1 (?)
2. MergeBlockIntoPredecessor
Updates DomTree, LoopInfo and MemoryDependenceResults
Moves all instruction from BB to Pred, deletes BB
Returns if doesn't have a single predecessor
Returns if BB's address was taken
After the patch:
Method 2. MergeBlockIntoPredecessor is attempting to become the new default:
Updates DomTree or DeferredDominance, and LoopInfo and MemoryDependenceResults
Moves all instruction from BB to Pred, deletes BB
Returns if doesn't have a single predecessor
Returns if BB's address was taken
Uses of MergeBasicBlockIntoOnlyPred that need to be replaced:
1. lib/Transforms/Scalar/LoopSimplifyCFG.cpp
Updated in this patch. No challenges.
2. lib/CodeGen/CodeGenPrepare.cpp
Updated in this patch.
i. eliminateFallThrough is straightforward, but I added using a temporary array to avoid the iterator invalidation.
ii. eliminateMostlyEmptyBlock(s) methods also now use a temporary array for blocks
Some interesting aspects:
- Since Pred is not deleted (BB is), the entry block does not need updating.
- The entry block was being updated with the deleted block in eliminateMostlyEmptyBlock. Added assert to make obvious that BB=SinglePred.
- isMergingEmptyBlockProfitable assumes BB is the one to be deleted.
- eliminateMostlyEmptyBlock(BB) does not delete BB on one path, it deletes its unique predecessor instead.
- adding some test owner as subscribers for the interesting tests modified:
test/CodeGen/X86/avx-cmp.ll
test/CodeGen/AMDGPU/nested-loop-conditions.ll
test/CodeGen/AMDGPU/si-annotate-cf.ll
test/CodeGen/X86/hoist-spill.ll
test/CodeGen/X86/2006-11-17-IllegalMove.ll
3. lib/Transforms/Scalar/JumpThreading.cpp
Not covered in this patch. It is the only use case using the DeferredDominance.
I would defer to Brian Rzycki to make this replacement.
Reviewers: chandlerc, spatel, davide, brzycki, bkramer, javed.absar
Subscribers: qcolombet, sanjoy, nemanjai, nhaehnle, jlebar, tpr, kbarton, RKSimon, wmi, arsenm, llvm-commits
Differential Revision: https://reviews.llvm.org/D48202
llvm-svn: 335183
CodeGenPrepare pass move extension instructions close to load instructions in different BB, so they can be combined later. But the extension instructions can't move through logical and shift instructions in current implementation. This patch enables this enhancement, so we can eliminate more extension instructions.
Differential Revision: https://reviews.llvm.org/D45537
This is re-commit of r331783, which was reverted by r333305. The performance regression was caused by some unlucky alignment, not a code generation problem.
llvm-svn: 334049
Review feedback from r328165. Split out just the one function from the
file that's used by Analysis. (As chandlerc pointed out, the original
change only moved the header and not the implementation anyway - which
was fine for the one function that was used (since it's a
template/inlined in the header) but not in general)
llvm-svn: 333954
When a GEP with all zero indices is converted to bitcast, its DI wasn't
copied over to the newly created instruction. This patch fixes that bug.
Patch by Kareem Ergawy!
Differential Revision: https://reviews.llvm.org/D47347
llvm-svn: 333235
When a bitcast is being sunk in -codegenprepare pass, its DI wasn't
copied over to the newly created instruction. This patch fixes that
bug.
Patch by Kareem Ergawy!
Differential Revision: https://reviews.llvm.org/D47282
llvm-svn: 333133
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
- Manual change to APInt
- Manually chage DOCS as regex doesn't match it.
In the transition period the DEBUG() macro is still present and aliased
to the LLVM_DEBUG() one.
Differential Revision: https://reviews.llvm.org/D43624
llvm-svn: 332240
This commit adds a wrapper for std::distance() which works with ranges.
As it would be a common case to write `distance(predecessors(BB))`, this
also introduces `pred_size()` and `succ_size()` helpers to make that
easier to write.
Differential Revision: https://reviews.llvm.org/D46668
llvm-svn: 332057
Accessing the members of a large data structures needs a lot of GEPs which
usually have large offsets due to the size of the underlying data structure. If
the offsets are too large to fit into the r+i addressing mode, these GEPs cannot
be sunk to their users' blocks and many extra registers are needed then to carry
the values of these GEPs.
This patch tries to split a large data struct starting from %base like the
following.
Before:
BB0:
%base =
BB1:
%gep0 = gep %base, off0
%gep1 = gep %base, off1
%gep2 = gep %base, off2
BB2:
%load1 = load %gep0
%load2 = load %gep1
%load3 = load %gep2
After:
BB0:
%base =
%new_base = gep %base, off0
BB1:
%new_gep0 = %new_base
%new_gep1 = gep %new_base, off1 - off0
%new_gep2 = gep %new_base, off2 - off0
BB2:
%load1 = load i32, i32* %new_gep0
%load2 = load i32, i32* %new_gep1
%load3 = load i32, i32* %new_gep2
In the above example, the struct is split into two parts. The first part still
starts from %base and the second part starts from %new_base. After the
splitting, %new_gep1 and %new_gep2 have smaller offsets and then can be sunk to
BB2 and folded into their users.
The algorithm to split data structure is simple and very similar to the work of
merging SExts. First, it collects GEPs that have large offsets when iterating
the blocks. Second, it splits the underlying data structures and updates the
collected GEPs to use smaller offsets.
Differential Revision: https://reviews.llvm.org/D42759
llvm-svn: 332015
CodeGenPrepare pass move extension instructions close to load instructions in different BB, so they can be combined later. But the extension instructions can't move through logical and shift instructions in current implementation. This patch enables this enhancement, so we can eliminate more extension instructions.
Differential Revision: https://reviews.llvm.org/D45537
llvm-svn: 331783
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
llvm-svn: 331272
See r331124 for how I made a list of files missing the include.
I then ran this Python script:
for f in open('filelist.txt'):
f = f.strip()
fl = open(f).readlines()
found = False
for i in xrange(len(fl)):
p = '#include "llvm/'
if not fl[i].startswith(p):
continue
if fl[i][len(p):] > 'Config':
fl.insert(i, '#include "llvm/Config/llvm-config.h"\n')
found = True
break
if not found:
print 'not found', f
else:
open(f, 'w').write(''.join(fl))
and then looked through everything with `svn diff | diffstat -l | xargs -n 1000 gvim -p`
and tried to fix include ordering and whatnot.
No intended behavior change.
llvm-svn: 331184
Currently EVT is in the IR layer only because of Function.cpp needing a very small piece of the functionality of EVT::getEVTString(). The rest of EVT is used in codegen making CodeGen a better place for it.
The previous code converted a Type* to EVT and then called getEVTString. This was only expected to handle the primitive types from Type*. Since there only a few primitive types, we can just print them as strings directly.
Differential Revision: https://reviews.llvm.org/D45017
llvm-svn: 328806
This is used by llvm tblgen as well as by LLVM Targets, so the only
common place is Support for now. (maybe we need another target for these
sorts of things - but for now I'm at least making them correct & we can
make them better if/when people have strong feelings)
llvm-svn: 328395
Remove #include of Transforms/Scalar.h from Transform/Utils to fix layering.
Transforms depends on Transforms/Utils, not the other way around. So
remove the header and the "createStripGCRelocatesPass" function
declaration (& definition) that is unused and motivated this dependency.
Move Transforms/Utils/Local.h into Analysis because it's used by
Analysis/MemoryBuiltins.cpp.
llvm-svn: 328165
Summary:
Made PHI node simplifiations more robust in several ways:
- Minor refactoring to let the SimplificationTracker own the
sets with new PHI/Select nodes that are introduced. This is
maybe not mapping to the original intention with the
SimplificationTracker, but IMHO it encapsulates the logic behind
those sets a little bit better.
- MatchPhiNode can sometimes populate the Matched set with
several entries, where it maps one PHI node to different candidates
for replacement. The Matched set is changed into a SmallSetVector
to make sure we get a deterministic iteration when doing
the replacements.
- As described above we may get several different replacements
for a single PHI node. The loop in MatchPhiSet that is doing
the replacements could end up calling eraseFromParent several
times for the same PHI node, resulting in segmentation faults.
This problem was supposed to be fixed in rL327250, but due to
the non-determinism(?) it only appeared to be fixed (I still
got crashes sometime when turning on/off -print-after-all etc
to get different iteration order in the DenseSets).
With this patch we follow the deterministic ordering in the
Matched set when replacing the PHI nodes. If we find a new
replacement for an already replaced PHI node we replace the
new replacement by the old replacement instead. This is quite
similar to what happened in the rl327250 patch, but here we
also recursively verify that the old replacement hasn't been
replaced already.
- It was really hard to track down the fault described above
(segementation fault due to doing eraseFromParent multiple
times for the same instruction). The fault was intermittent and
small changes in the code, or simply turning on -print-after-all
etc could make the problem go away. This was basically due to
the iteration over PhiNodesToMatch in MatchPhiSet no being
deterministic. Therefore I've changed the data structure for
the SimplificationTracker::AllPhiNodes into an SmallSetVector.
This gives a deterministic behavior.
Reviewers: skatkov, john.brawn
Reviewed By: skatkov
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D44571
llvm-svn: 327961
splitMergedValStore will split a store into two if target prefers this, or if
-force-split-store is passed.
This patch adds the missing handling for endianness in this function along
with a test case.
Review: Eli Friedman
https://reviews.llvm.org/D44396
llvm-svn: 327375
When we replace the Phi we created with matched ones it is possible that
there are two identical phi nodes in IR. And matcher is smart enough to find that
new created phi matches both of them. So we try to replace our phi node with
matched ones twice and what is bad we delete our phi node twice causing a crash.
As soon as we found that we have two identical Phi nodes it makes sense to do
a clean-up and replace one phi node by other one.
The patch implements it.
Reviewers: john.brawn, reames
Reviewed By: john.brawn
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D43758
llvm-svn: 327250
Making a width of GEP Index, which is used for address calculation, to be one of the pointer properties in the Data Layout.
p[address space]:size:memory_size:alignment:pref_alignment:index_size_in_bits.
The index size parameter is optional, if not specified, it is equal to the pointer size.
Till now, the InstCombiner normalized GEPs and extended the Index operand to the pointer width.
It works fine if you can convert pointer to integer for address calculation and all registered targets do this.
But some ISAs have very restricted instruction set for the pointer calculation. During discussions were desided to retrieve information for GEP index from the Data Layout.
http://lists.llvm.org/pipermail/llvm-dev/2018-January/120416.html
I added an interface to the Data Layout and I changed the InstCombiner and some other passes to take the Index width into account.
This change does not affect any in-tree target. I added tests to cover data layouts with explicitly specified index size.
Differential Revision: https://reviews.llvm.org/D42123
llvm-svn: 325102
Summary:
This change is part of step five in the series of changes to remove alignment argument from
memcpy/memmove/memset in favour of alignment attributes. In particular, this changes the
CodeGenPrepare pass to be more aggressive in improving the source and destination alignments
of memcpy/memmove/memset by exploiting our new ability to record independent alignments
for each argument.
Steps:
Step 1) Remove alignment parameter and create alignment parameter attributes for
memcpy/memmove/memset. ( rL322965, rC322964, rL322963 )
Step 2) Expand the IRBuilder API to allow creation of memcpy/memmove with differing
source and dest alignments. ( rL323597 )
Step 3) Update Clang to use the new IRBuilder API. ( rC323617 )
Step 4) Update Polly to use the new IRBuilder API. ( rL323618 )
Step 5) Update LLVM passes that create memcpy/memmove calls to use the new IRBuilder API,
and those that use use MemIntrinsicInst::[get|set]Alignment() to use [get|set]DestAlignment()
and [get|set]SourceAlignment() instead. ( rL323886 )
Step 6) Remove the single-alignment IRBuilder API for memcpy/memmove, and the
MemIntrinsicInst::[get|set]Alignment() methods.
Reference
http://lists.llvm.org/pipermail/llvm-dev/2015-August/089384.htmlhttp://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151109/312083.html
llvm-svn: 323891
If in complex addressing mode the difference is in GV then
base reg should not be installed because we plan to use
base reg as a merge point of different GVs.
This is a fix for PR35980.
Reviewers: reames, john.brawn, santosh
Reviewed By: john.brawn
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42230
llvm-svn: 323192
Summary:
In preparation for https://reviews.llvm.org/D41675 this NFC changes this
prototype of MemIntrinsicInst::setAlignment() to accept an unsigned instead
of a Constant.
llvm-svn: 322403
If the offset is differ in two addressing mode we can continue only if
ScaleReg is not set due to we will use it as merge of different offsets.
It should fix PR35799 and PR35805.
Reviewers: john.brawn, reames
Reviewed By: reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41227
llvm-svn: 322056