The parsing of ADD/SUB shifted immediates needs to be done explicitly so
that better diagnostics can be emitted, as a side effect this also
removes some of the hacks in the current method of handling this operand
type.
Additionally remove manual CMP aliasing to ADD/SUB and use InstAlias
instead.
llvm-svn: 208329
Summary:
These instructions were added in MIPS-I, and MIPS-II but were removed in
MIPS-III. Interestingly, GAS continues to accept them when assembling for
MIPS-III.
For the moment, these instructions will follow GAS and accept them for
MIPS-III and newer but this will be tightened up when the invalid-*.s
tests are added.
Depends on D3647
Reviewers: vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3648
llvm-svn: 208311
Summary:
A small number of instructions are rejected with the wrong error message.
These have been placed in a separate test for now. There seems to be some
parsing quirk that triggers when these instructions are disabled.
Depends on D3571
Reviewers: vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3647
llvm-svn: 208305
The old method used by X86TTI to determine partial-unrolling thresholds was
messy (because it worked by testing target features), and also would not
correctly identify the target CPU if certain target features were disabled.
After some discussions on IRC with Chandler et al., it was decided that the
processor scheduling models were the right containers for this information
(because it is often tied to special uop dispatch-buffer sizes).
This does represent a small functionality change:
- For generic x86-64 (which uses the SB model and, thus, will get some
unrolling).
- For AMD cores (because they still currently use the SB scheduling model)
- For Haswell (based on benchmarking by Louis Gerbarg, it was decided to bump
the default threshold to 50; we're working on a test case for this).
Otherwise, nothing has changed for any other targets. The logic, however, has
been moved into BasicTTI, so other targets may now also opt-in to this
functionality simply by setting LoopMicroOpBufferSize in their processor
model definitions.
llvm-svn: 208289
This adds FK_SecRel_2 relocation support to ARM. This enables the building of
object files for armv7-windows-msvc which enables CodeView line tables for
debugging as opposed to armv7-windows-itanium which currently uses DWARF.
llvm-svn: 208273
Summary:
Vectors built with zeros and elements in the same order as another
(source) vector are optimized to be built using a single insertps
instruction.
Also optimize when we move one element in a vector to a different place
in that vector while zeroing out some of the other elements.
Further optimizations are possible, described in TODO comments.
I will be implementing at least some of them in the near future.
Added some tests for different cases where this optimization triggers.
Reviewers: nadav, delena, craig.topper
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D3521
llvm-svn: 208271
The loop stream detector (LSD) on modern Intel cores, which optimizes the
execution of small loops, has limits on the number of taken branches in
addition to uop-count limits (modern AMD cores have similar limits).
Unfortunately, at the IR level, estimating the number of branches that will be
taken is difficult. For one thing, it strongly depends on later passes (block
placement, etc.). The original implementation took a conservative approach and
limited the maximal BB DFS depth of the loop. However, fairly-extensive
benchmarking by several of us has revealed that this is the wrong approach. In
fact, there are zero known cases where the branch limit prevents a detrimental
unrolling (but plenty of cases where it does prevent beneficial unrolling).
While we could improve the current branch counting logic by incorporating
branch probabilities, this further complication seems unjustified without a
motivating regression. Instead, unless and until a regression appears, the
branch counting will be removed.
llvm-svn: 208255
Given a FMA family (e.g., 213, 231), not all the variants (i.e., register or
memory) are commutable.
E.g., for the 213 family (with the syntax src1, src2, src3):
fmaXXX213 A, B, reg3/mem3 == fmaXXX213 B, A, reg3/mem3
Now consider the 231 family:
fmaXXX231 A, B, reg3 == fmaXXX231 A, reg3, B
But
fmaXXX231 A, B, mem3 != fmaXXX231 A, mem3, B
Indeed, mem3 cannot be the second argument of the memory variant of fmaXXX231.
Working on a reduced test case!
<rdar://problem/16800495>
llvm-svn: 208252
default architecture for reasonable modern x86 processors, actually be
modern. This processor model should essentially be "tuned" for modern
x86 chips as much as possible without undue penalties on any specific
architecture. Previously we weren't even using the nice scheduling
models. There are a few other tweaks needed here, but this change at
least I have benchmarked across a decent swatch of chips (intel's
clovertown, westmere, and sandybridge; amd's istanbul) and seen no
significant regressions.
If anyone has suggested ways to test this, just let me know. Somewhat
alarmingly, no existing tests failed.
llvm-svn: 208230
this patch disables the dead register elimination pass and the load/store pair
optimization pass at -O0. The ILP optimizations don't require the optimization
level to be checked because the call to addILPOpts is predicated with the
necessary check. The AdvSIMDScalar pass is disabled by default at all
optimization levels. This patch leaves that pass disabled by default.
Also, move command-line options into ARM64TargetMachine.cpp and add a few
additional flags to aid in debugging. This fixes an issue with the
-debug-pass=Structure flag where passes were printed, but not actually run
(i.e., AdvSIMDScalar pass).
llvm-svn: 208223
Summary:
These processors will only be available for the integrated assembler at
first (CodeGen will emit a fatal error saying they are not implemented).
The intention is to work through the existing instructions and correctly
annotate the ISA they were added in so that we have a sufficiently good
base to start MIPS64r6 development. MIPS64r6 removes/re-encodes certain
instructions and I believe it is best to define ISA's using set-union's
as far as possible rather than using set-subtraction.
Reviewers: vmedic
Subscribers: emaste, llvm-commits
Differential Revision: http://reviews.llvm.org/D3569
llvm-svn: 208221
When performing a scalar comparison that feeds into a vector select,
it's actually better to do the comparison on the vector side: the
scalar route would be "CMP -> CSEL -> DUP", the vector is "CM -> DUP"
since the vector comparisons are all mask based.
llvm-svn: 208210
Summary:
One small functional change. The recently added PAUSE instruction now has
the HasStdEnc predicate which was accidentally removed by a Requires<>.
Depends on D3640
Reviewers: vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3641
llvm-svn: 208209
Summary:
Move IsGP64bit into GPRPredicates, and IsFP64bit/NotFP64bit into FGRPredicates
No functional change (confirmed by diffing tablegen-erated files).
Depends on D3639
Reviewers: vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3640
llvm-svn: 208201
The AAPCS states that values passed in registers must have a value as though
they had been loaded with "LDR". LDR is equivalent to "LD1.64 vX.1D" - that is,
loading scalars to vector registers and loading 1-element vectors is equivalent.
The logic implemented here is to ensure that at all call boundaries and during
formal argument lowering all vectors are treated as their bitwidth-based floating
point scalar counterpart, which is always one of f64 or f128 (v2i32 -> f64,
v4i32 -> f128 etc). A BITCAST is inserted so that the appropriate REV will be
generated during code generation.
llvm-svn: 208198
Summary:
This makes it easier to prove a more complicated change in the next commit
is non-functional.
Reviewers: vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3639
llvm-svn: 208197
Because we've canonicalised on using LD1/ST1, every time we do a bitcast
between vector types we must do an equivalent lane reversal.
Consider a simple memory load followed by a bitconvert then a store.
v0 = load v2i32
v1 = BITCAST v2i32 v0 to v4i16
store v4i16 v2
In big endian mode every memory access has an implicit byte swap. LDR and
STR do a 64-bit byte swap, whereas LD1/ST1 do a byte swap per lane - that
is, they treat the vector as a sequence of elements to be byte-swapped.
The two pairs of instructions are fundamentally incompatible. We've decided
to use LD1/ST1 only to simplify compiler implementation.
LD1/ST1 perform the equivalent of a sequence of LDR/STR + REV. This makes
the original code sequence: v0 = load v2i32
v1 = REV v2i32 (implicit)
v2 = BITCAST v2i32 v1 to v4i16
v3 = REV v4i16 v2 (implicit)
store v4i16 v3
But this is now broken - the value stored is different to the value loaded
due to lane reordering. To fix this, on every BITCAST we must perform two
other REVs:
v0 = load v2i32
v1 = REV v2i32 (implicit)
v2 = REV v2i32
v3 = BITCAST v2i32 v2 to v4i16
v4 = REV v4i16
v5 = REV v4i16 v4 (implicit)
store v4i16 v5
This means an extra two instructions, but actually in most cases the two REV
instructions can be combined into one. For example:
(REV64_2s (REV64_4h X)) === (REV32_4h X)
There is also no 128-bit REV instruction. This must be synthesized with an
EXT instruction.
Most bitconverts require some sort of conversion. The only exceptions are:
a) Identity conversions - vNfX <-> vNiX
b) Single-lane-to-scalar - v1fX <-> fX or v1iX <-> iX
Even though there are hundreds of changed lines, I have a fairly high confidence
that they are somewhat correct. The changes to add two REV instructions per
bitcast were pretty mechanical, and once I'd done that I threw the resulting
.td at a script I wrote which combined the two REVs together (and added
an EXT instruction, for f128) based on an instruction description I gave it.
This was much less prone to error than doing it all manually, plus my brain
would not just have melted but would have vapourised.
llvm-svn: 208194
This completes the port of r204814 (cpirker "AArch64_BE function argument
passing for ARM ABI") from AArch64 to ARM64, and fixes a bunch of issues
found during later development along the way. The biggest of these was
that the alignment fixup logic wasn't replicated into all the places it
should have been.
llvm-svn: 208192
Summary:
The overall idea is to chop the Predicates list into subsets that are
usually overridden independently. This allows subclasses to partially
override the predicates of their superclasses without having to re-add all
the existing predicates.
This patch starts the process by moving HasStdEnc into a new
EncodingPredicates list and almost everything else into
AdditionalPredicates.
It has revealed a couple likely bugs where 'let Predicates' has removed
the HasStdEnc predicate.
No functional change (confirmed by diffing tablegen-erated files).
Depends on D3549, D3506
Reviewers: vmedic
Differential Revision: http://reviews.llvm.org/D3550
llvm-svn: 208184
Summary:
This will make it easier to prove that a more complicated change in the
following commit is non-functional.
No functional change.
Depends on D3506
Reviewers: vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3549
llvm-svn: 208179
Mark up additional instructions which are part of the function prologue as
MachineFrameSetup. These instructions are part of the function prologue,
emitted by the PEI pass to setup the stack for use in the activating frame.
llvm-svn: 208153
The ARM::BLX instruction is an ARM mode instruction. The Windows on ARM target
is limited to Thumb instructions. Correctly use the thumb mode tBLXr
instruction. This would manifest as an errant write into the object file as the
instruction is 4-bytes in length rather than 2. The result would be a corrupted
object file that would eventually result in an executable that would crash at
runtime.
llvm-svn: 208152
remove it from the list of unspilled registers. Otherwise the following
attempt to keep the stack aligned by picking an extra GPR register to
spill will not work as it picks up r11.
llvm-svn: 208129
Before this patch, the backend always emitted a store+load sequence to
bitconvert from f64 to i64 the input operand of a ISD::BITCAST dag node that
performed a bitconvert from type MVT::f64 to type MVT::v2i32. The resulting
i64 node was then used to build a v2i32 vector.
With this patch, the backend now produces a cheaper SCALAR_TO_VECTOR from
MVT::f64 to MVT::v2f64. That SCALAR_TO_VECTOR is then followed by a "free"
bitcast to type MVT::v4i32. The elements of the resulting
v4i32 are then extracted to build a v2i32 vector (which is illegal and
therefore promoted to MVT::v2i64).
This is in general cheaper than emitting a stack store+load sequence
to bitconvert the operand from type f64 to type i64.
llvm-svn: 208107
This patch implements the infrastructure to use named register constructs in
programs that need access to specific registers (bare metal, kernels, etc).
So far, only the stack pointer is supported as a technology preview, but as it
is, the intrinsic can already support all non-allocatable registers from any
architecture.
llvm-svn: 208104
The Win64 docs are very clear that anything larger than 8 bytes is
passed by reference, and GCC MinGW64 honors that for __modti3 and
friends.
Patch by Jameson Nash!
llvm-svn: 208029
Summary:
Also ran clang-format on the function. The code added is the last else
if block.
Reviewers: nadav, craig.topper
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D3518
llvm-svn: 207992
Windows on ARM does not conform to AEABI. However, memset would be emitted
using the AEABI signature, resulting in inverted parameters. Handle this
special case appropriately.
llvm-svn: 207943
Add handling for FK_SecRel_4 (4-byte section relative relocations). These are
used by the generation of DWARF debug information (the abbrevations use section
relative relocations). This will also be used in generation of CodeView line
tables.
llvm-svn: 207941
Both MinGW and cygwin (i686) construct export directives without the global
leader prefix. This is mostly due to the fact that they use GNU ld which does
not correctly handle the export directive. This apparently has been been broken
for a while. However, this was recently reported as being broken by
mingwandroid and diorcety of the msys2 project.
Remove the global leader prefix if targeting MinGW or cygwin, otherwise, retain
the global leader prefix. Add an explicit test for cygwin's behaviour of export
directives.
llvm-svn: 207926
Create a helper function to generate the export directive. This was previously
duplicated inline to handle export directives for variables and functions. This
also enables the use of range-based iterators for the generation of the
directive rather than the traditional loops. NFC.
llvm-svn: 207925
The fix itself is fairly simple: move getAccessVariant to MCValue so that we
replace the old weak expression evaluation with the far more general
EvaluateAsRelocatable.
This then requires that EvaluateAsRelocatable stop when it finds a non
trivial reference kind. And that in turn requires the ELF writer to look
harder for weak references.
Last but not least, this found a case where we were being bug by bug
compatible with gas and accepting an invalid input. I reported pr19647
to track it.
llvm-svn: 207920
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Signed-off-by: Samuel Li <samuel.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
llvm-svn: 207846
The register spiller assumes that only one new instruction is created
when spilling and restoring registers, so we need to emit pseudo
instructions for vector register spills and lower them after
register allocation.
v2:
- Fix calculation of lane index
- Extend VGPR liveness to end of program.
v3:
- Use SIMM16 field of S_NOP to specify multiple NOPs.
https://bugs.freedesktop.org/show_bug.cgi?id=75005
llvm-svn: 207843
Previously, LLVM had no knowledge that these instructions actually
modified their address register: fine if they never end up in CodeGen,
but when I'd rather like to write some patterns for them it becomes a
disaster.
The change is mostly straightforward, I think the most significant
design decision was to *always* put the address write-back first. This
allows loads and stores to be accessed more uniformly, for example
permitting the continued sharing of the InstAlias definitions.
I also discovered that the custom Decode logic is no longer needed, so
I removed it.
No tests, because there should be no functionality change.
llvm-svn: 207839
While post-indexed LD1/ST1 instructions do exist for vector loads,
this patch makes use of the more flexible addressing-modes in LDR/STR
instructions.
llvm-svn: 207838
This creates a lot of core infrastructure in which to add, with little
effort, quite a bit more to mips fast-isel
Test Plan: simplestore.ll
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D3527
llvm-svn: 207790
This optimization merges the common part of a group of GEPs, so we can compute
each pointer address by adding a simple offset to the common part.
The optimization is currently only enabled for the NVPTX backend, where it has
a large payoff on some benchmarks.
Review: http://reviews.llvm.org/D3462
Patch by Jingyue Wu.
llvm-svn: 207783
We currently force symbols to be globals in .thumb_set. The intent
seems to be that given
.thumb_set foo, bar
we emit an undefined symbol to bar if it is never defined. The side
effect is that we mark bar as global, even if it is defined, which gas
does not.
Producing an undefined reference to bar is a general difference from MC and gas.
For example, given
a = b
gas will produce an undefined reference to b, MC will not. I would be surprised
if any code depends on this, but it it does, we should fix the general
difference, not special case .thumb_set.
llvm-svn: 207757
The canonical form of the BFM instruction is always one of the more explicit
extract or insert operations, which makes reading output much easier.
llvm-svn: 207752
Summary:
There are two functional changes:
1) The directive is not expanded for the ASM->ASM code path.
2) If PIC is not set, there's no expansion for the ASM->OBJ code path (same behaviour as GAS).
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D3482
llvm-svn: 207741
This fixes the memory leak introduced with the initial addition of support for
WoA stack probing. Now that the pseudo-instruction expansion can handle an
external symbol, use that to generate the load which simplifies the logic as
well as avoids the memory leak.
llvm-svn: 207737
This enhances the expansion of the mov32imm pseudo-instruction to support an
external symbol reference. This is motivated by a simplification of the stack
probe emission for Windows on ARM (and fixing a leak).
llvm-svn: 207736
For pattern like ((x >> C1) & Mask) << C2, DAG combiner may convert it
into (x >> (C1-C2)) & (Mask << C2), which makes pattern matching of ubfx
more difficult.
For example:
Given
%shr = lshr i64 %x, 4
%and = and i64 %shr, 15
%arrayidx = getelementptr inbounds [8 x [64 x i64]]* @arr, i64 0, %i64 2, i64 %and
%0 = load i64* %arrayidx
With current shift folding, it takes 3 instrs to compute base address:
lsr x8, x0, #1
and x8, x8, #0x78
add x8, x9, x8
If using ubfx, it only needs 2 instrs:
ubfx x8, x0, #4, #4
add x8, x9, x8, lsl #3
This fixes bug 19589
llvm-svn: 207702
There is no need to check if we want to hoist the immediate value of an
shift instruction. Simply return TCC_Free right away.
This change is like r206101, but for X86.
rdar://problem/16190769
llvm-svn: 207692
Summary: negu $reg is equivalent to negu $reg, $reg.
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D3510
llvm-svn: 207673
Summary:
The pattern sltu $r1, $r2, $imm is found in handwritten assembly which
is just a shorthand version of sltui $r1, $r2, $imm.
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D3508
llvm-svn: 207671
It's been decided that in the future, the floating-point immediate in
instructions like "fcmeq v0.2s, v1.2s, #0.0" will be canonically "0.0", which
has been implemented on AArch64 already but not ARM64.
This fixes that issue.
llvm-svn: 207666
Summary:
The pattern dsll/dsrl $rd, $rt, $rs is found in handwritten assembly which
is just a shorthand version of dsllv/dsrlv $rd, $rt, $rs.
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D3486
llvm-svn: 207664
Summary:
The pattern sll/srl $rd, $rt, $rs is found in handwritten assembly which
is just a shorthand version of sllv/srlv $rd, $rt, $rs.
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D3483
llvm-svn: 207657
target cannot be determined accurately. This is the case for NaCl where the
sandboxing instructions are added in MC layer, after the MipsLongBranch pass.
It is also the case when the code has inline assembly. Instead of calculating
offset in the MipsLongBranch pass, use %hi(sym1 - sym2) and %lo(sym1 - sym2)
expressions that are resolved during the fixup.
This patch also deletes microMIPS test file test/CodeGen/Mips/micromips-long-branch.ll
and implements microMIPS CHECKs in a much simpler way in a file
test/CodeGen/Mips/longbranch.ll, together with MIPS32 and MIPS64.
llvm-svn: 207656
Only emit calls to compiler-rt asm routines on platforms where they are
present (currently limited to linux i386/x86_64).
Patch by Yuri Gorshenin.
llvm-svn: 207651
The canonical syntax for shifts by a variable amount does not end with 'v', but
that syntax should be supported as an alias (presumably for legacy reasons).
llvm-svn: 207649
AArch64 does not have a CPSR register in the same way that AArch32 does. Most
of its compiler-relevant roles have been taken over by the more specific NZCV
register (representing just the flags set by normal instructions).
Its system control functions still remain, but are now under the
pseudo-register referred to as "PSTATE". They're accessed via various MRS & MSR
instructions described in the reference manual.
llvm-svn: 207645
On instructions using the NZCV register, a couple of conditions have dual
representations: HS/CS and LO/CC (meaning unsigned-higher-or-same/carry-set and
unsigned-lower/carry-clear). The first of these is more descriptive in most
circumstances, so we should print it.
llvm-svn: 207644
Summary:
This isn't supported directly so we rotate the vector by the desired number of
elements, insert to element zero, then rotate back.
The i64 case generates rather poor code on MIPS32. There is an obvious
optimisation to be made in future (do both insert.w's inside a shared
rotate/unrotate sequence) but for now it's sufficient to select valid code
instead of aborting.
Depends on D3536
Reviewers: matheusalmeida
Reviewed By: matheusalmeida
Differential Revision: http://reviews.llvm.org/D3537
llvm-svn: 207640
Summary:
This directive is used for setting up $gp in the beginning of a function.
It expands to three instructions if PIC is enabled:
lui $gp, %hi(_gp_disp)
addui $gp, $gp, %lo(_gp_disp)
addu $gp, $gp, $reg
_gp_disp is a special symbol that the linker sets to the distance between
the lui instruction and the context pointer (_gp).
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D3480
llvm-svn: 207637
Since these are mostly used in "lsl #16", "lsl #32", "lsl #48" combinations to
piece together an immediate in 16-bit chunks, hex is probably the most
appropriate format.
llvm-svn: 207635
This is mostly aimed at the NEON logical operations and MOVI/MVNI (since they
accept weird shifts which are more naturally understandable in hex notation).
Also changes BRK/HINT etc, which is probably a neutral change, but easier than
the alternative.
llvm-svn: 207634
Since these instructions only accept a 12-bit immediate, possibly shifted left
by 12, the canonical syntax used by the architecture reference manual is "#N {,
lsl #12 }". We should accept an immediate that has already been shifted, (e.g.
Also, print a comment giving the full addend since it can be helpful.
llvm-svn: 207633
This introduces the stack lowering emission of the stack probe function for
Windows on ARM. The stack on Windows on ARM is a dynamically paged stack where
any page allocation which crosses a page boundary of the following guard page
will cause a page fault. This page fault must be handled by the kernel to
ensure that the page is faulted in. If this does not occur and a write access
any memory beyond that, the page fault will go unserviced, resulting in an
abnormal program termination.
The watermark for the stack probe appears to be at 4080 bytes (for
accommodating the stack guard canaries and stack alignment) when SSP is
enabled. Otherwise, the stack probe is emitted on the page size boundary of
4096 bytes.
llvm-svn: 207615
Emit the COFF header when printing out the function. This is important as the
header contains two important pieces of information: the storage class for the
symbol and the symbol type information. This bit of information is required for
the linker to correctly identify the type of symbol that it is dealing with.
llvm-svn: 207613
When building with -Werror=covered-switch-default (as on the buildbots), the
build would fail since all cases are covered by the switch. Move the
llvm_unreachable to the end of the function as an annotation.
llvm-svn: 207609
IMAGE_REL_ARM_MOV32T relocations require that the movw/movt pair-wise
relocation is not split up and reordered. When expanding the mov32imm
pseudo-instruction, create a bundle if the machine operand is referencing an
address. This helps ensure that the relocatable address load is not reordered
by subsequent passes.
Unfortunately, this only partially handles the case as the Constant Island Pass
occurs after the instructions are unbundled and does not properly handle
bundles. That is a more fundamental issue with the pass itself and beyond the
scope of this change.
llvm-svn: 207608
Currently, musttail codegen is relying on sibcall optimization, and
reporting a fatal error if fails. Sibcall optimization fails when stack
arguments need to be modified, which is insufficient for musttail.
The logic for moving arguments in memory safely is already implemented
for GuaranteedTailCallOpt. This change merely arranges for musttail
calls to use it.
No functional change for GuaranteedTailCallOpt.
Reviewers: espindola
Differential Revision: http://reviews.llvm.org/D3493
llvm-svn: 207598
It's already set in AMDGPUISelLowering for all GPUs
Patch By: Jan Vesely
Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
llvm-svn: 207592
SI_IF and SI_ELSE are terminators which also produce a value. For
these instructions ISel always inserts a COPY to move their value
to another basic block. This COPY ends up between SI_(IF|ELSE)
and the S_BRANCH* instruction at the end of the block.
This breaks MachineBasicBlock::getFirstTerminator() and also the
machine verifier which assumes that terminators are grouped together at
the end of blocks.
To solve this we coalesce the copy away right after ISel to make sure
there are no instructions in between terminators at the end of blocks.
llvm-svn: 207591
SALU instructions ignore control flow, so it is not always safe to use
them within branches. This is a partial solution to this problem
until we can come up with something better.
llvm-svn: 207590
This is a squash of several optimization commits:
- calculate DIV_Lo and DIV_Hi separately
- use BFE_U32 if we are operating on 32bit values
- use precomputed constants instead of shifting in UDVIREM
- skip the first 32 iterations of udivrem
v2: Check whether BFE is supported before using it
Patch by: Jan Vesely
Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
llvm-svn: 207589
Initial implementation, rather slow
Patch by: Jan Vesely
Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
llvm-svn: 207588
When legalizing ops, with UDIV/UREM set to expand, they automatically
expand to UDIVREM (if legal or custom).
We need to do this manually for legalize types.
v2:
SI should be set to Expand because the type is legal, and it is
automatically lowered to UDIVREM if UDIVREM is Legal/Custom
R600 should set to UDIV/UREM to Custom because it needs to lower them
during type legalization
Patch by: Jan Vesely
Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
llvm-svn: 207587
Summary:
The InstSE class already initializes Predicates to [HasStdEnc].
No functional change (confirmed by diffing tablegen-erated files before and
after)
Differential Revision: http://reviews.llvm.org/D3548
llvm-svn: 207558
Summary:
The InstSE class already initializes Predicates to [HasStdEnc].
No functional change (confirmed by diffing tablegen-erated files before and
after)
Differential Revision: http://reviews.llvm.org/D3547
llvm-svn: 207551
Summary:
The MipsPat class already initializes Predicates to [HasStdEnc].
No functional change (confirmed by diffing tablegen-erated files before and
after)
Differential Revision: http://reviews.llvm.org/D3546
llvm-svn: 207548
Summary:
This isn't supported directly so we splat the vector element and extract
the most convenient copy.
Reviewers: matheusalmeida
Reviewed By: matheusalmeida
Differential Revision: http://reviews.llvm.org/D3530
llvm-svn: 207524
This patch centralizes the handling of the thumb bit around
MCStreamer::isThumbFunc and makes isThumbFunc handle aliases.
This fixes a corner case, but the main advantage is having just one
way to check if a MCSymbol is thumb or not. This should still be
refactored to be ARM only, but at least now it is just one predicate
that has to be refactored instead of 3 (isThumbFunc,
ELF_Other_ThumbFunc, and SF_ThumbFunc).
llvm-svn: 207522
Daniel Sanders