requires ! feature
The purpose of this is to allow (for instance) the module map for /usr/include
to exclude <tgmath.h> and <complex.h> when building in C++ (these headers are
instead provided by the C++ standard library in this case, and the glibc C
<tgmath.h> header would otherwise try to include <complex.h>, resulting in a
module cycle).
llvm-svn: 193549
This allows using virtual file mappings on the original SourceManager to
map in virtual module.map files. Without this patch, the ModuleMap
search will find a module.map file (as the FileEntry exists in the
FileManager), but will be unable to get the content from the
SourceManager (as ModuleMap previously created its own SourceManager).
Two problems needed to be fixed which this patch exposed:
1. Storing the inferred module map
When writing out a module, the ASTWriter stores the names of the files
in the main source manager; when loading the AST again, the ASTReader
errs out if such a file is found missing, unless it is overridden.
Previously CompilerInstance's compileModule method would store the
inferred module map to a temporary file; the problem with this approach
is that now that the module map is handled by the main source manager,
the ASTWriter stores the name of the temporary module map as source to
the compilation; later, when the module is loaded, the temporary file
has already been deleted, which leads to a compilation error. This patch
changes the inferred module map to instead inject a virtual file into
the source manager. This both saves some disk IO, and works with how the
ASTWriter/ASTReader handle overridden source files.
2. Changing test input in test/Modules/Inputs/*
Now that the module map file is handled by the main source manager, the
VerifyDiagnosticConsumer will not ignore diagnostics created while
parsing the module map file. The module test test/Modules/renamed.m uses
-I test/Modules/Inputs and triggers recursive loading of all module maps
in test/Modules/Inputs, some of which had conflicting names, thus
leading errors while parsing the module maps. Those diagnostics already
occur on trunk, but before this patch they would not break the test, as
they were ignored by the VerifyDiagnosticConsumer. This patch thus
changes the module maps that have been recently introduced which broke
the invariant of compatible modules maps in test/Modules/Inputs.
llvm-svn: 193314
Let the module building code handle the case of overwriting an existing file
itself, so the existing locking infrastructure works correctly.
<rdar://problem/14403381>
llvm-svn: 190833
- Open files before calling stat on them.
- Go through FileManager for getting the buffer of named pipes. It has the
necessary plumbing to deal with "volatile" files.
- Print the cause when stdin reading fails. The only case I can imagine where
this happens is when stdin is wired to a device file, so no test case.
llvm-svn: 188178
This option prints information about #included files to stderr. Clang could
already do it, this patch just teaches the existing code about the /showIncludes
style and adds the flag.
Differential Revision: http://llvm-reviews.chandlerc.com/D1333
llvm-svn: 188037
* Use a single stat to find out if the file exists and if it is a regular file.
* Use early returns when possible.
* Add comments explaining why we have each check.
llvm-svn: 185091
Previously, we would clone the current diagnostic consumer to produce
a new diagnostic consumer to use when building a module. The problem
here is that we end up losing diagnostics for important diagnostic
consumers, such as serialized diagnostics (where we'd end up with two
diagnostic consumers writing the same output file). With forwarding,
the diagnostics from all of the different modules being built get
forwarded to the one serialized-diagnostic consumer and are emitted in
a sane way.
Fixes <rdar://problem/13663996>.
llvm-svn: 181067
Syntactically means the function macro parameter names do not need to use the same
identifiers in order for the definitions to be considered identical.
Syntactic equivalence is a microsoft extension for macro redefinitions and we'll also
use this kind of comparison to check for ambiguous macros coming from modules.
rdar://13562254
llvm-svn: 178671
For each macro directive (define, undefine, visibility) have a separate object that gets chained
to the macro directive history. This has several benefits:
-No need to mutate a MacroDirective when there is a undefine/visibility directive. Stuff like
PPMutationListener become unnecessary.
-No need to keep extra source locations for the undef/visibility locations for the define directive object
(which is the majority of the directives)
-Much easier to hide/unhide a section in the macro directive history.
-Easier to track the effects of the directives across different submodules.
llvm-svn: 178037
Configuration macros are macros that are intended to alter how a
module works, such that we need to build different module variants
for different values of these macros. A module can declare its
configuration macros, in which case we will complain if the definition
of a configation macro on the command line (or lack thereof) differs
from the current preprocessor state at the point where the module is
imported. This should eliminate some surprises when enabling modules,
because "#define CONFIG_MACRO ..." followed by "#include
<module/header.h>" would silently ignore the CONFIG_MACRO setting. At
least it will no longer be silent about it.
Configuration macros are eventually intended to help reduce the number
of module variants that need to be built. When the list of
configuration macros for a module is exhaustive, we only need to
consider the settings for those macros when building/finding the
module, which can help isolate modules for various project-specific -D
flags that should never affect how modules are build (but currently do).
llvm-svn: 177466
The global module index was querying the file manager for each of the
module files it knows about at load time, to prune out any out-of-date
information. The file manager would then cache the results of the
stat() falls used to find that module file.
Later, the same translation unit could end up trying to import one of the
module files that had previously been ignored by the module cache, but
after some other Clang instance rebuilt the module file to bring it
up-to-date. The stale stat() results in the file manager would
trigger a second rebuild of the already-up-to-date module, causing
failures down the line.
The global module index now lazily resolves its module file references
to actual AST reader module files only after the module file has been
loaded, eliminating the stat-caching race. Moreover, the AST reader
can communicate to its caller that a module file is missing (rather
than simply being out-of-date), allowing us to simplify the
module-loading logic and allowing the compiler to recover if a
dependent module file ends up getting deleted.
llvm-svn: 177367
The use of this flag enables a modules optimization where a given set
of macros can be labeled as "ignored" by the modules
system. Definitions of those macros will be completely ignored when
building the module hash and will be stripped when actually building
modules. The overall effect is that this flag can be used to
drastically reduce the number of
Eventually, we'll want modules to tell us what set of macros they
respond to (the "configuration macros"), and anything not in that set
will be excluded. However, that requires a lot of per-module
information that must be accurate, whereas this option can be used
more readily.
Fixes the rest of <rdar://problem/13165109>.
llvm-svn: 174560
This can happen when one abuses precompiled headers by passing more -D
options when using a precompiled hedaer than when it was built. This
is intentionally permitted by precompiled headers (and is exploited by
some build environments), but causes problems for modules.
First part of <rdar://problem/13165109>, detecting when something when
horribly wrong.
llvm-svn: 174554
People use the C preprocessor for things other than C files. Some of them
have Unicode characters. We shouldn't warn about Unicode characters
appearing outside of identifiers in this case.
There's not currently a way for the preprocessor to tell if it's in -E mode,
so I added a new flag, derived from the PreprocessorOutputOptions. This is
only used by the Unicode warnings for now, but could conceivably be used by
other warnings or even behavioral differences later.
<rdar://problem/13107323>
llvm-svn: 173881
AST reader.
The global module index tracks all of the identifiers known to a set
of module files. Lookup of those identifiers looks first in the global
module index, which returns the set of module files in which that
identifier can be found. The AST reader only needs to look into those
module files and any module files not known to the global index (e.g.,
because they were (re)built after the global index), reducing the
number of on-disk hash tables to visit. For an example source I'm
looking at, we go from 237844 total identifier lookups into on-disk
hash tables down to 126817.
Unfortunately, this does not translate into a performance advantage.
At best, it's a wash once the global module index has been built, but
that's ignore the cost of building the global module index (which
is itself fairly large). Profiles show that the global module index
code is far less efficient than it should be; optimizing it might give
enough of an advantage to justify its continued inclusion.
llvm-svn: 173405
The global module index is a "global" index for all of the module
files within a particular subdirectory in the module cache, which
keeps track of all of the "interesting" identifiers and selectors
known in each of the module files. One can perform a fast lookup in
the index to determine which module files will have more information
about entities with a particular name/selector. This information can
help eliminate redundant lookups into module files (a serious
performance problem) and help with creating auto-import/auto-include
Fix-Its.
The global module index is created or updated at the end of a
translation unit that has triggered a (re)build of a module by
scraping all of the .pcm files out of the module cache subdirectory,
so it catches everything. As with module rebuilds, we use the file
system's atomicity to synchronize.
llvm-svn: 173301
Also, it was the only reason that `argc` and `argv` were being passed
into createDiagnostics, so remove those parameters and clean up callers.
llvm-svn: 172945
This looks like it was copied from SetUpBuildDumpLog, which dumps to the
file `DiagOpts->DumpBuildInformation`. There is another member
`DiagOpts->DiagnosticLogFile` which appears to be unused. The fact that
this feature doesn't even print to the output file specified on the
command line makes me think that it should be ripped out.
llvm-svn: 172944
which a particular declaration resides. Use this information to
customize the "definition of 'blah' must be imported from another
module" diagnostic with the module the user actually has to
import. Additionally, recover by importing that module, so we don't
complain about other names in that module.
Still TODO: coming up with decent Fix-Its for these cases, and expand
this recovery approach for other name lookup failures.
llvm-svn: 172290
uncovered.
This required manually correcting all of the incorrect main-module
headers I could find, and running the new llvm/utils/sort_includes.py
script over the files.
I also manually added quite a few missing headers that were uncovered by
shuffling the order or moving headers up to be main-module-headers.
llvm-svn: 169237
Richard Smith