This patch makes LSR generate better code for SystemZ in the cases of memory
intrinsics, Load->Store pairs or comparison of immediate with memory.
In order to achieve this, the following common code changes were made:
* New TTI hook: LSRWithInstrQueries(), which defaults to false. Controls if
LSR should do instruction-based addressing evaluations by calling
isLegalAddressingMode() with the Instruction pointers.
* In LoopStrengthReduce: handle address operands of memset, memmove and memcpy
as address uses, and call isFoldableMemAccessOffset() for any LSRUse::Address,
not just loads or stores.
SystemZ changes:
* isLSRCostLess() implemented with Insns first, and without ImmCost.
* New function supportedAddressingMode() that is a helper for TTI methods
looking at Instructions passed via pointers.
Review: Ulrich Weigand, Quentin Colombet
https://reviews.llvm.org/D35262https://reviews.llvm.org/D35049
llvm-svn: 308729
This patch adds handling of the `long_call`, `far`, and `near`
attributes passed by front-end. The patch depends on D35479.
Differential revision: https://reviews.llvm.org/D35480.
llvm-svn: 308606
Introduced FSELECT node necesary when lowering ISD::SELECT
which has i32, f64, f64 as its operands.
SEL_D instruction required that its output and first operand
of a SELECT node, which it used, have matching types.
MTC1_D64 node introduced to aid FSELECT lowering.
This fixes machine verifier errors on following tests:
CodeGen/Mips/llvm-ir/select-dbl.ll
CodeGen/Mips/llvm-ir/select-flt.ll
CodeGen/Mips/select.ll
Differential Revision: https://reviews.llvm.org/D35408
llvm-svn: 308595
If the `long-calls` feature flags is enabled, disable use of the `jal`
instruction. Instead of that call a function by by first loading its
address into a register, and then using the contents of that register.
Differential revision: https://reviews.llvm.org/D35168
llvm-svn: 308087
For multiprecision arithmetic on MIPS, rather than using ISD::ADDE / ISD::ADDC,
get SelectionDAG to break down the operation into ISD::ADDs and ISD::SETCCs.
For MIPS, only the DSP ASE has a carry flag, so in the general case it is not
useful to directly support ISD::{ADDE, ADDC, SUBE, SUBC} nodes.
Also improve the generation code in such cases for targets with
TargetLoweringBase::ZeroOrOneBooleanContent by directly using the result of the
comparison node rather than using it in selects. Similarly for ISD::SUBE /
ISD::SUBC.
Address optimization breakage by moving the generation of MIPS specific integer
multiply-accumulate nodes to before legalization.
This revolves PR32713 and PR33424.
Thanks to Simonas Kazlauskas and Pirama Arumuga Nainar for reporting the issue!
Reviewers: slthakur
Differential Revision: https://reviews.llvm.org/D33494
The previous version of this patch was too aggressive in producing fused
integer multiple-addition instructions.
llvm-svn: 307906
This patch adds one more condition in selection DINS/INS
instruction, which fixes MultiSource/Applications/JM/ldecod/
for mips32r2 (and mips64r2 n32 abi).
Differential Revision: https://reviews.llvm.org/D33725
llvm-svn: 305888
For multiprecision arithmetic on MIPS, rather than using ISD::ADDE / ISD::ADDC,
get SelectionDAG to break down the operation into ISD::ADDs and ISD::SETCCs.
For MIPS, only the DSP ASE has a carry flag, so in the general case it is not
useful to directly support ISD::{ADDE, ADDC, SUBE, SUBC} nodes.
Also improve the generation code in such cases for targets with
TargetLoweringBase::ZeroOrOneBooleanContent by directly using the result of the
comparison node rather than using it in selects. Similarly for ISD::SUBE /
ISD::SUBC.
Address optimization breakage by moving the generation of MIPS specific integer
multiply-accumulate nodes to before legalization.
This revolves PR32713 and PR33424.
Thanks to Simonas Kazlauskas and Pirama Arumuga Nainar for reporting the issue!
Reviewers: slthakur
Differential Revision: https://reviews.llvm.org/D33494
llvm-svn: 305389
By target hookifying getRegisterType, getNumRegisters, getVectorBreakdown,
backends can request that LLVM to scalarize vector types for calls
and returns.
The MIPS vector ABI requires that vector arguments and returns are passed in
integer registers. With SelectionDAG's new hooks, the MIPS backend can now
handle LLVM-IR with vector types in calls and returns. E.g.
'call @foo(<4 x i32> %4)'.
Previously these cases would be scalarized for the MIPS O32/N32/N64 ABI for
calls and returns if vector types were not legal. If vector types were legal,
a single 128bit vector argument would be assigned to a single 32 bit / 64 bit
integer register.
By teaching the MIPS backend to inspect the original types, it can now
implement the MIPS vector ABI which requires a particular method of
scalarizing vectors.
Previously, the MIPS backend relied on clang to scalarize types such as "call
@foo(<4 x float> %a) into "call @foo(i32 inreg %1, i32 inreg %2, i32 inreg %3,
i32 inreg %4)".
This patch enables the MIPS backend to take either form for vector types.
The previous version of this patch had a "conditional move or jump depends on
uninitialized value".
Reviewers: zoran.jovanovic, jaydeep, vkalintiris, slthakur
Differential Revision: https://reviews.llvm.org/D27845
llvm-svn: 305083
The clang compiler by default uses FastISel when invoked with -O0, which
is also the default. In that case, passing of -mxgot does not get honored,
i.e. the code path that is to deal with large got is not taken.
Clang produces same output regardless of -mxgot being present or not.
This change checks whether -mxgot is passed as an option, and turns off
FastISel if it is.
Patch by Stefan Maksimovic.
Differential Revision: https://reviews.llvm.org/D33593
llvm-svn: 304906
I did this a long time ago with a janky python script, but now
clang-format has built-in support for this. I fed clang-format every
line with a #include and let it re-sort things according to the precise
LLVM rules for include ordering baked into clang-format these days.
I've reverted a number of files where the results of sorting includes
isn't healthy. Either places where we have legacy code relying on
particular include ordering (where possible, I'll fix these separately)
or where we have particular formatting around #include lines that
I didn't want to disturb in this patch.
This patch is *entirely* mechanical. If you get merge conflicts or
anything, just ignore the changes in this patch and run clang-format
over your #include lines in the files.
Sorry for any noise here, but it is important to keep these things
stable. I was seeing an increasing number of patches with irrelevant
re-ordering of #include lines because clang-format was used. This patch
at least isolates that churn, makes it easy to skip when resolving
conflicts, and gets us to a clean baseline (again).
llvm-svn: 304787
Summary:
Currently FPOWI defaults to Legal and LegalizeDAG.cpp turns Legal into Expand for this opcode because Legal is a "lie".
This patch changes the default for this opcode to Expand and removes the hack from LegalizeDAG.cpp. It also removes all the code in the targets that set this opcode to Expand themselves since they can just rely on the default.
Reviewers: spatel, RKSimon, efriedma
Reviewed By: RKSimon
Subscribers: jfb, dschuff, sbc100, jgravelle-google, nemanjai, javed.absar, andrew.w.kaylor, llvm-commits
Differential Revision: https://reviews.llvm.org/D33530
llvm-svn: 304215
Using arguments with attribute inalloca creates problems for verification
of machine representation. This attribute instructs the backend that the
argument is prepared in stack prior to CALLSEQ_START..CALLSEQ_END
sequence (see http://llvm.org/docs/InAlloca.htm for details). Frame size
stored in CALLSEQ_START in this case does not count the size of this
argument. However CALLSEQ_END still keeps total frame size, as caller can
be responsible for cleanup of entire frame. So CALLSEQ_START and
CALLSEQ_END keep different frame size and the difference is treated by
MachineVerifier as stack error. Currently there is no way to distinguish
this case from actual errors.
This patch adds additional argument to CALLSEQ_START and its
target-specific counterparts to keep size of stack that is set up prior to
the call frame sequence. This argument allows MachineVerifier to calculate
actual frame size associated with frame setup instruction and correctly
process the case of inalloca arguments.
The changes made by the patch are:
- Frame setup instructions get the second mandatory argument. It
affects all targets that use frame pseudo instructions and touched many
files although the changes are uniform.
- Access to frame properties are implemented using special instructions
rather than calls getOperand(N).getImm(). For X86 and ARM such
replacement was made previously.
- Changes that reflect appearance of additional argument of frame setup
instruction. These involve proper instruction initialization and
methods that access instruction arguments.
- MachineVerifier retrieves frame size using method, which reports sum of
frame parts initialized inside frame instruction pair and outside it.
The patch implements approach proposed by Quentin Colombet in
https://bugs.llvm.org/show_bug.cgi?id=27481#c1.
It fixes 9 tests failed with machine verifier enabled and listed
in PR27481.
Differential Revision: https://reviews.llvm.org/D32394
llvm-svn: 302527
r299766 contained a "conditional move or jump depends on uninitialized value"
fault, identified by valgrind. This occurred as MipsFastISel::finishCall(..)
used CCState over MipsCCState. The latter is required for the TableGen'd calling
convention logic due to reliance on pre-analyzing type information to lower call
results/returns of vectors correctly.
This change modifies the MipsCC AnalyzeCallResult to be useful with both the
SelectionDAG and FastISel lowering logic.
Reviewers: slthakur
Differential Revision: https://reviews.llvm.org/D32004
llvm-svn: 301392
This reverts commit r299766. This change appears to have broken the MIPS
buildbots. Reverting while I investigate.
Revert "[mips] Remove usage of debug only variable (NFC)"
This reverts commit r299769. Follow up commit.
llvm-svn: 299788
By target hookifying getRegisterType, getNumRegisters, getVectorBreakdown,
backends can request that LLVM to scalarize vector types for calls
and returns.
The MIPS vector ABI requires that vector arguments and returns are passed in
integer registers. With SelectionDAG's new hooks, the MIPS backend can now
handle LLVM-IR with vector types in calls and returns. E.g.
'call @foo(<4 x i32> %4)'.
Previously these cases would be scalarized for the MIPS O32/N32/N64 ABI for
calls and returns if vector types were not legal. If vector types were legal,
a single 128bit vector argument would be assigned to a single 32 bit / 64 bit
integer register.
By teaching the MIPS backend to inspect the original types, it can now
implement the MIPS vector ABI which requires a particular method of
scalarizing vectors.
Previously, the MIPS backend relied on clang to scalarize types such as "call
@foo(<4 x float> %a) into "call @foo(i32 inreg %1, i32 inreg %2, i32 inreg %3,
i32 inreg %4)".
This patch enables the MIPS backend to take either form for vector types.
Reviewers: zoran.jovanovic, jaydeep, vkalintiris, slthakur
Differential Revision: https://reviews.llvm.org/D27845
llvm-svn: 299766
This patch adds support for recognizing more patterns to match to DEXT and
CINS instructions.
It finds cases where multiple instructions could be replaced with a single
DEXT or CINS instruction.
For example, for the following:
define i64 @dext_and32(i64 zeroext %a) {
entry:
%and = and i64 %a, 4294967295
ret i64 %and
}
instead of generating:
0000000000000088 <dext_and32>:
88: 64010001 daddiu at,zero,1
8c: 0001083c dsll32 at,at,0x0
90: 6421ffff daddiu at,at,-1
94: 03e00008 jr ra
98: 00811024 and v0,a0,at
9c: 00000000 nop
the following gets generated:
0000000000000068 <dext_and32>:
68: 03e00008 jr ra
6c: 7c82f803 dext v0,a0,0x0,0x20
Cases that are covered:
DEXT:
1. and $src, mask where mask > 0xffff
2. zext $src zero extend from i32 to i64
CINS:
1. and (shl $src, pos), mask
2. shl (and $src, mask), pos
3. zext (shl $src, pos) zero extend from i32 to i64
Patch by Violeta Vukobrat.
Differential Revision: https://reviews.llvm.org/D30464
llvm-svn: 297832
The fix introduces segfaults and clobbers the value to be stored when
the atomic sequence loops.
Revert "[Target/MIPS] Kill dead code, no functional change intended."
This reverts commit r296153.
Revert "Recommit "[mips] Fix atomic compare and swap at O0.""
This reverts commit r296134.
llvm-svn: 297380
This time with the missing files.
Similar to PR/25526, fast-regalloc introduces spills at the end of basic
blocks. When this occurs in between an ll and sc, the store can cause the
atomic sequence to fail.
This patch fixes the issue by introducing more pseudos to represent atomic
operations and moving their lowering to after the expansion of postRA
pseudos.
This resolves PR/32020.
Thanks to James Cowgill for reporting the issue!
Reviewers: slthakur
Differential Revision: https://reviews.llvm.org/D30257
llvm-svn: 296134
Similar to PR/25526, fast-regalloc introduces spills at the end of basic
blocks. When this occurs in between an ll and sc, the store can cause the
atomic sequence to fail.
This patch fixes the issue by introducing more pseudos to represent atomic
operations and moving their lowering to after the expansion of postRA
pseudos.
This resolves PR/32020.
Thanks to James Cowgill for reporting the issue!
Reviewers: slthakur
Differential Revision: https://reviews.llvm.org/D30257
llvm-svn: 296132
This patch makes one change to GOT handling and two changes to N64's
relocation model handling. Furthermore, the jumptable encodings have
been corrected for static N64.
Big GOT handling is now done via a new SDNode MipsGotHi - this node is
unconditionally lowered to an lui instruction.
The first change to N64's relocation handling is the lifting of the
restriction that N64 always uses PIC. Now it is possible to target static
environments.
The second change adds support for 64 bit symbols and enables them by
default. Previously N64 had patterns for sym32 mode only. In this mode all
symbols are assumed to have 32 bit addresses. sym32 mode support
is selectable with attribute 'sym32'. A follow on patch for clang will
add the necessary frontend parameter.
This partially resolves PR/23485.
Thanks to Brooks Davis for reporting the issue!
This version corrects a "Conditional jump or move depends on uninitialised
value(s)" error detected by valgrind present in the original commit.
Reviewers: dsanders, seanbruno, zoran.jovanovic, vkalintiris
Differential Revision: https://reviews.llvm.org/D23652
llvm-svn: 293279
This patch makes one change to GOT handling and two changes to N64's
relocation model handling. Furthermore, the jumptable encodings have
been corrected for static N64.
Big GOT handling is now done via a new SDNode MipsGotHi - this node is
unconditionally lowered to an lui instruction.
The first change to N64's relocation handling is the lifting of the
restriction that N64 always uses PIC. Now it is possible to target static
environments.
The second change adds support for 64 bit symbols and enables them by
default. Previously N64 had patterns for sym32 mode only. In this mode all
symbols are assumed to have 32 bit addresses. sym32 mode support
is selectable with attribute 'sym32'. A follow on patch for clang will
add the necessary frontend parameter.
This partially resolves PR/23485.
Thanks to Brooks Davis for reporting the issue!
Reviewers: dsanders, seanbruno, zoran.jovanovic, vkalintiris
Differential Revision: https://reviews.llvm.org/D23652
llvm-svn: 293164
The tail call optimization was being used without proper consideration of
ABI requirements for saving and restoring the GP. This patch restricts tail
call optimization to functions within the same translation unit.
Reviewers: vkalintiris
Differential Revision: https://reviews.llvm.org/D24763
llvm-svn: 287505
For 64bit ABIs it is common practice to use relative Jump Tables with
potentially different relocation bases. As the logic for the jump table
itself doesn't depend on the relocation base, make it easier for targets
to use the generic logic. Start by dropping the now redundant MIPS logic.
Differential Revision: https://reviews.llvm.org/D26578
llvm-svn: 286951
These functions are about classifying a global which will actually be
emitted, so it does not make sense for them to take a GlobalValue which may
for example be an alias.
Change the Mach-O object writer and the Hexagon, Lanai and MIPS backends to
look through aliases before using TargetLoweringObjectFile interfaces. These
are functional changes but all appear to be bug fixes.
Differential Revision: https://reviews.llvm.org/D25917
llvm-svn: 285006
Summary:
Instead of instantiating the MipsFastISel class and checking if the
target is supported in the overriden methods, we should perform that
check before creating the class. This allows us to enable FastISel *only*
for targets that truly support it, ie. MIPS32 to MIPS32R5.
Reviewers: sdardis
Subscribers: ehostunreach, llvm-commits
Differential Revision: https://reviews.llvm.org/D24824
llvm-svn: 284475
The postRA scheduler performs alias analysis to determine if stores and loads
can moved past each other. When a function has more arguments than argument
registers for the calling convention used, excess arguments are spilled onto the
stack. LLVM by default assumes that argument slots are immutable, unless the
function contains a tail call. Without the knowledge of that a function contains
a tail call site, stores and loads to fixed stack slots may be re-ordered
causing the out-going arguments to clobber the incoming arguments before the
incoming arguments are supposed to be dead.
Reviewers: vkalintiris
Differential Review: https://reviews.llvm.org/D24077
llvm-svn: 282063
As part of this effort, remove MipsFCmp nodes and use tablegen
patterns rather than custom lowering through C++.
Unexpectedly, this improves codesize for microMIPS as previous floating
point setcc expansions would materialize 0 and 1 into GPRs before using
the relevant mov[tf].[sd] instruction. Now $zero is used directly.
Reviewers: dsanders, vkalintiris, zoran.jovanovic
Differential Review: https://reviews.llvm.org/D23118
llvm-svn: 281022
Summary:
The o32 ABI doesn't not support the TImode helpers. For the time being,
disable just the shift libcalls as they break recursive builds on MIPS.
Reviewers: sdardis
Subscribers: llvm-commits, sdardis
Differential Revision: https://reviews.llvm.org/D24259
llvm-svn: 280798
LLVM has an @llvm.eh.dwarf.cfa intrinsic, used to lower the GCC-compatible
__builtin_dwarf_cfa() builtin. As pointed out in PR26761, this is currently
broken on PowerPC (and likely on ARM as well). Currently, @llvm.eh.dwarf.cfa is
lowered using:
ADD(FRAMEADDR, FRAME_TO_ARGS_OFFSET)
where FRAME_TO_ARGS_OFFSET defaults to the constant zero. On x86,
FRAME_TO_ARGS_OFFSET is lowered to 2*SlotSize. This setup, however, does not
work for PowerPC. Because of the way that the stack layout works, the canonical
frame address is not exactly (FRAMEADDR + FRAME_TO_ARGS_OFFSET) on PowerPC
(there is a lower save-area offset as well), so it is not just a matter of
implementing FRAME_TO_ARGS_OFFSET for PowerPC (unless we redefine its
semantics -- We can do that, since it is currently used only for
@llvm.eh.dwarf.cfa lowering, but the better to directly lower the CFA construct
itself (since it can be easily represented as a fixed-offset FrameIndex)). Mips
currently does this, but by using a custom lowering for ADD that specifically
recognizes the (FRAMEADDR, FRAME_TO_ARGS_OFFSET) pattern.
This change introduces a ISD::EH_DWARF_CFA node, which by default expands using
the existing logic, but can be directly lowered by the target. Mips is updated
to use this method (which simplifies its implementation, and I suspect makes it
more robust), and updates PowerPC to do the same.
Fixes PR26761.
Differential Revision: https://reviews.llvm.org/D24038
llvm-svn: 280350
This is a mechanical change of comments in switches like fallthrough,
fall-through, or fall-thru to use the LLVM_FALLTHROUGH macro instead.
llvm-svn: 278902
Summary:
Instead, we take a single flags arg (a bitset).
Also add a default 0 alignment, and change the order of arguments so the
alignment comes before the flags.
This greatly simplifies many callsites, and fixes a bug in
AMDGPUISelLowering, wherein the order of the args to getLoad was
inverted. It also greatly simplifies the process of adding another flag
to getLoad.
Reviewers: chandlerc, tstellarAMD
Subscribers: jholewinski, arsenm, jyknight, dsanders, nemanjai, llvm-commits
Differential Revision: http://reviews.llvm.org/D22249
llvm-svn: 275592
This is a mechanical change to make TargetLowering API take MachineInstr&
(instead of MachineInstr*), since the argument is expected to be a valid
MachineInstr. In one case, changed a parameter from MachineInstr* to
MachineBasicBlock::iterator, since it was used as an insertion point.
As a side effect, this removes a bunch of MachineInstr* to
MachineBasicBlock::iterator implicit conversions, a necessary step
toward fixing PR26753.
llvm-svn: 274287
Eugene Zelenko