Because mod is always exact, this function should have never taken a rounding mode argument. The actual implementation still has issues, which I'll look at resolving in a subsequent patch.
llvm-svn: 248195
before any relocations have been applied, and again after all relocations have
been applied.
Previously each section was dumped before and after relocations targetting it
were applied, but this only shows the impact of relocations that point to other
symbols in the same section.
llvm-svn: 247335
Except the changes that defined virtual destructors as =default, because that
ran into problems with GCC 4.7 and overriding methods that weren't noexcept.
llvm-svn: 247298
This patch adds a test for MIPS64R6 relocations, it corrects check
expressions for R_MIPS_26 and R_MIPS_PC16 relocations in MIPS64R2 test, and
it adds run for big endian in MIPS64R2 test.
Patch by Vladimir Radosavljevic.
Differential Revision: http://reviews.llvm.org/D11217
llvm-svn: 246311
Code-section alignment should be at least as high as the minimum
stub alignment. If the section alignment is lower it can cause
padding to be emitted resulting in alignment errors if the section
is mapped to a higher alignment on the target.
E.g. If a text section with a 4-byte alignment gets 4-bytes of
padding to guarantee 8-byte alignment for stubs but is re-mapped to
an 8-byte alignment on the target, the 4-bytes of padding will push
the stubs to 4-byte alignment causing a crash.
No test case: There is currently no way to control host section
alignment in llvm-rtdyld. This could be made testable by adding
a custom memory manager. I'll look at that in a follow-up patch.
llvm-svn: 245031
After r244870 flush() will only compare two null pointers and return,
doing nothing but wasting run time. The call is not required any more
as the stream and its SmallString are always in sync.
Thanks to David Blaikie for reviewing.
llvm-svn: 244928
Previously, for O32 ABI we did not calculate correct addend for R_MIPS_HI16
and R_MIPS_PCHI16 relocations. This patch fixes that.
Patch by Vladimir Radosavljevic.
Differential Revision: http://reviews.llvm.org/D11186
llvm-svn: 244897
LoadedObjectInfo was depending on the implicit copy ctor in the presence
of a user-declared dtor. Default (and protect) it in the base class and
make the devired classes final to avoid any risk of a public API that
would enable slicing.
llvm-svn: 244112
Various value handles needed to be copy constructible and copy
assignable (mostly for their use in DenseMap). But to avoid an API that
might allow accidental slicing, make these members protected in the base
class and make derived classes final (the special members become
implicitly public there - but disallowing further derived classes that
might be sliced to the intermediate type).
Might be worth having a warning a bit like -Wnon-virtual-dtor that
catches public move/copy assign/ctors in classes with virtual functions.
(suppressable in the same way - by making them protected in the base,
and making the derived classes final) Could be fancier and only diagnose
them when they're actually called, potentially.
Also allow a few default implementations where custom implementations
(especially with non-standard return types) were implemented.
llvm-svn: 243909
There is an ODR conflict between lib/ExecutionEngine/ExecutionEngineBindings.cpp
and lib/Target/TargetMachineC.cpp. The inline definitions should simply
be marked static (thanks dblaikie for the hint).
llvm-svn: 243298
Summary:
Replace getDataLayout() with a createDataLayout() method to make
explicit that it is intended to create a DataLayout only and not
accessing it for other purpose.
This change is the last of a series of commits dedicated to have a
single DataLayout during compilation by using always the one owned
by the module.
Reviewers: echristo
Subscribers: jholewinski, llvm-commits, rafael, yaron.keren
Differential Revision: http://reviews.llvm.org/D11103
(cherry picked from commit 5609fc56bca971e5a7efeaa6ca4676638eaec5ea)
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 243114
This reverts commit 0f720d984f419c747709462f7476dff962c0bc41.
It breaks clang too badly, I need to prepare a proper patch for clang
first.
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 243089
Summary:
Replace getDataLayout() with a createDataLayout() method to make
explicit that it is intended to create a DataLayout only and not
accessing it for other purpose.
This change is the last of a series of commits dedicated to have a
single DataLayout during compilation by using always the one owned
by the module.
Reviewers: echristo
Subscribers: jholewinski, llvm-commits, rafael, yaron.keren
Differential Revision: http://reviews.llvm.org/D11103
(cherry picked from commit 5609fc56bca971e5a7efeaa6ca4676638eaec5ea)
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 243083
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
The ExecutionEngine will act as an exception and will be unsafe to
be reused across context. We don't enforce this rule but undefined
behavior can occurs if the user tries to do it.
Reviewers: lhames
Subscribers: echristo, llvm-commits, rafael, yaron.keren
Differential Revision: http://reviews.llvm.org/D11110
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 242414
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
The ExecutionEngine will act as an exception and will be unsafe to
be reused across context. We don't enforce this rule but undefined
behavior can occurs if the user tries to do it.
Reviewers: lhames
Subscribers: echristo, llvm-commits, rafael, yaron.keren
Differential Revision: http://reviews.llvm.org/D11110
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 242387
Originally added in r139314.
Back then it didn't actually get the address, it got whatever value the
relocation used: address or offset.
The values in different object formats are:
* MachO: Always an offset.
* COFF: Always an address, but when talking about the virtual address of
sections it says: "for simplicity, compilers should set this to zero".
* ELF: An offset for .o files and and address for .so files. In the case of the
.so, the relocation in not linked to any section (sh_info is 0). We can't
really compute an offset.
Some API mappings would be:
* Use getAddress for everything. It would be quite cumbersome. To compute the
address elf has to follow sh_info, which can be corrupted and therefore the
method has to return an ErrorOr. The address of the section is also the same
for every relocation in a section, so we shouldn't have to check the error
and fetch the value for every relocation.
* Use a getValue and make it up to the user to know what it is getting.
* Use a getOffset and:
* Assert for dynamic ELF objects. That is a very peculiar case and it is
probably fair to ask any tool that wants to support it to use ELF.h. The
only tool we have that reads those (llvm-readobj) already does that. The
only other use case I can think of is a dynamic linker.
* Check that COFF .obj files have sections with zero virtual address spaces. If
it turns out that some assembler/compiler produces these, we can change
COFFObjectFile::getRelocationOffset to subtract it. Given COFF format,
this can be done without the need for ErrorOr.
The getRelocationAddress method was never implemented for COFF. It also
had exactly one use in a very peculiar case: a shortcut for adding the
section value to a pcrel reloc on MachO.
Given that, I don't expect that there is any use out there of the C API. If
that is not the case, let me know and I will add it back with the implementation
inlined and do a proper deprecation.
llvm-svn: 241450
Add support for resolving MIPS32r6 relocations in MCJIT.
Patch by Vladimir Radosavljevic.
Differential Revision: http://reviews.llvm.org/D10687
llvm-svn: 241442
Requested by Eugene Rozenfeld of the LLILC team, this feature allows JIT
clients to skip relocations for selected external symbols by returning ~0ULL
from their symbol resolver. If this value is returned for a given symbol,
RuntimeDyld will skip all relocations for that symbol. The client will be
responsible for applying the skipped relocations manually before the code
is executed.
llvm-svn: 241383
This function can really fail since the string table offset can be out of
bounds.
Using ErrorOr makes sure the error is checked.
Hopefully a lot of the boilerplate code in tools/* can go away once we have
a diagnostic manager in Object.
llvm-svn: 241297
Realistically, this will be returning ErrorOr for some time as refactoring the
user code to check once per section will take some time.
Given that, use it for checking if a relocation has addend or not.
While at it, add ELFRelocationRef to simplify the users.
llvm-svn: 241028
Stephen Canon