This is a patch to support D66328, which was reverted until this lands.
Enable a compiler-rt test that used to fail previously with D66328.
Differential Revision: https://reviews.llvm.org/D67283
Summary:
`SCUDO_DEBUG` was not enabled for unit tests, meaning the `DCHECK`s
were never tripped. While turning this on, I discovered that a few
of those not-exercised checks were actually wrong. This CL addresses
those incorrect checks.
Not that to work in tests `CHECK_IMPL` has to explicitely use the
`scudo` namespace. Also changes a C cast to a C++ cast.
Reviewers: hctim, pcc, cferris, eugenis, vitalybuka
Subscribers: mgorny, #sanitizers, llvm-commits
Tags: #sanitizers, #llvm
Differential Revision: https://reviews.llvm.org/D70276
Summary:
Previously it wasn't obvious what the default value of various sanitizer
options were. A very close approximation of the "default values" for the
options are the current value of the options at the time of printing the
help output.
In the case that no other options are provided then the current values
are the default values (apart from `help`).
```
ASAN_OPTIONS=help=1 ./program
```
This patch causes the current option values to be printed when the
`help` output is enabled. The original intention for this patch was to append
`(Default: <value>)` to an option's help text. However because this
is technically wrong (and misleading) I've opted to append
`(Current Value: <value>)` instead.
When trying to implement a way of displaying the default value of the
options I tried another solution where the default value used in `*.inc` files
were used to create compile time strings that where used when printing
the help output. This solution was not satisfactory for several reasons:
* Stringifying the default values with the preprocessor did not work very
well in several cases. Some options contain boolean operators which no
amount of macro expansion can get rid of.
* It was much more invasive than this patch. Every sanitizer had to be changed.
* The settings of `__<sanitizer>_default_options()` are ignored.
For those reasons I opted for the solution in this patch.
rdar://problem/42567204
Reviewers: kubamracek, yln, kcc, dvyukov, vitalybuka, cryptoad, eugenis, samsonov
Subscribers: #sanitizers, llvm-commits
Tags: #sanitizers, #llvm
Differential Revision: https://reviews.llvm.org/D69546
Split out the logic to get the size of a merged profile and to do a
compatibility check. This can be shared with both the continuous+merging
mode implementation, as well as the runtime-allocated counters
implementation planned for Fuchsia.
Lifted out of D69586.
Differential Revision: https://reviews.llvm.org/D70135
A few years back a similar change was made for getenv since neither function is supported on the PS4 platform.
Recently, commit d889d1e added a call to setenv in compiler-rt which was causing linking errors because the symbol was not found. This fixes that issue by putting in a shim similar to how we previously dealt with the lack of getenv.
Differential Revision: https://reviews.llvm.org/D70033
Summary:
This patch fixes two problems with the crtbegin.c as written:
1. In do_init, register_frame_info is not guarded by a #define, but in
do_fini, deregister_frame_info is guarded by #ifndef
CRT_HAS_INITFINI_ARRAY. Thus when CRT_HAS_INITFINI_ARRAY is not
defined, frames are registered but then never deregistered.
The frame registry mechanism builds a linked-list from the .so's
static variable do_init.object, and when the .so is unloaded, this
memory becomes invalid and should be deregistered.
Further, libgcc's crtbegin treats the frame registry as independent
from the initfini array mechanism.
This patch fixes this by adding a new #define,
"EH_USE_FRAME_INFO_REGISTRY", which is set by the cmake option
COMPILER_RT_CRT_USE_EH_FRAME_REGISTRY Currently, do_init calls
register_frame_info, and then calls the binary's constructors. This
allows constructors to safely use libunwind. However, do_fini calls
deregister_frame_info and then calls the binary's destructors. This
prevents destructors from safely using libunwind.
This patch also switches that ordering, so that destructors can safely
use libunwind. As it happens, this is a fairly common scenario for
thread sanitizer.
Summary: Bionic was modified to have all function names consistent. Modify the code and get rid of the special case for bionic since it's no longer needed.
Reviewers: cryptoad
Reviewed By: cryptoad
Subscribers: srhines, llvm-commits, #sanitizers
Tags: #sanitizers, #llvm
Differential Revision: https://reviews.llvm.org/D70031
__fixunstfti converts a long double (IBM double-double) to an unsigned 128 bit
integer. This patch enables it to handle a previously unhandled case in which
a negative low double may impact the result of the conversion.
Collaborated with @masoud.ataei and @renenkel.
Patch By: Baptiste Saleil
Differential Revision: https://reviews.llvm.org/D69193
Fallout from:
[clang] Report sanitizer blacklist as a dependency in cc1
Default blacklists are now passed via -fsanitize-system-blacklist from driver to cc1.
https://bugs.llvm.org/show_bug.cgi?id=43722
GWP-ASan didn't include SANITIZER_COMMON_CFLAGS, and thus would produce
LLVM bitcode files, when compiler-rt is generally built without LTO.
This allows crtbegin and crtend to be built, allowing RISC-V
to no longer rely on implementations from libgcc.
Differential revision: https://reviews.llvm.org/D68393
D69405 causes failure if running LIT when the compiler was built without lld.
Patch by Anh Tuyen Tran (anhtuyen)
Differential Revision: https://reviews.llvm.org/D69685
This was an experiment made possible by a non-standard feature of the
Android dynamic loader.
It required introducing a flag to tell the compiler which ABI was being
targeted.
This flag is no longer needed, since the generated code now works for
both ABI's.
We leave that flag untouched for backwards compatibility. This also
means that if we need to distinguish between targeted ABI's again
we can do that without disturbing any existing workflows.
We leave a comment in the source code and mention in the help text to
explain this for any confused person reading the code in the future.
Patch by Matthew Malcomson
Differential Revision: https://reviews.llvm.org/D69574
This commit added use of a Windows API in InstrProfilingPort.h.
When _MSC_VER is defined (for MSVC), windows.h is already included
earlier in the same header (for atomics), but MinGW, the gcc
atomics builtins are used instead. Therefore explicitly include
windows.h here, where the API is used.
Use the printf macros from inttypes.h to sidestep -Wformat issues:
/var/lib/buildbot/sanitizer-buildbot6/sanitizer-x86_64-linux-android/build/llvm-project/compiler-rt/lib/profile/InstrProfilingFile.c:425:14: error: format specifies type 'long long' but the argument has type 'off_t' (aka 'long') [-Werror,-Wformat]
CurrentFileOffset, PageSize);
^~~~~~~~~~~~~~~~~
/var/lib/buildbot/sanitizer-buildbot6/sanitizer-x86_64-linux-android/build/llvm-project/compiler-rt/lib/profile/InstrProfilingPort.h:114:50: note: expanded from macro 'PROF_ERR'
fprintf(stderr, "LLVM Profile Error: " Format, __VA_ARGS__);
~~~~~~ ^~~~~~~~~~~
/var/lib/buildbot/sanitizer-buildbot6/sanitizer-x86_64-linux-android/build/llvm-project/compiler-rt/lib/profile/InstrProfilingFile.c:461:41: error: format specifies type 'unsigned long long' but the argument has type 'uint64_t' (aka 'unsigned long') [-Werror,-Wformat]
strerror(errno), CountersBegin, PageAlignedCountersLength, Fileno,
^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/buildbot/sanitizer-buildbot6/sanitizer-x86_64-linux-android/build/llvm-project/compiler-rt/lib/profile/InstrProfilingPort.h:114:50: note: expanded from macro 'PROF_ERR'
fprintf(stderr, "LLVM Profile Error: " Format, __VA_ARGS__);
~~~~~~ ^~~~~~~~~~~
/var/lib/buildbot/sanitizer-buildbot6/sanitizer-x86_64-linux-android/build/llvm-project/compiler-rt/lib/profile/InstrProfilingFile.c:462:9: error: format specifies type 'unsigned long long' but the argument has type 'uint64_t' (aka 'unsigned long') [-Werror,-Wformat]
FileOffsetToCounters);
^~~~~~~~~~~~~~~~~~~~
/var/lib/buildbot/sanitizer-buildbot6/sanitizer-x86_64-linux-android/build/llvm-project/compiler-rt/lib/profile/InstrProfilingPort.h:114:50: note: expanded from macro 'PROF_ERR'
fprintf(stderr, "LLVM Profile Error: " Format, __VA_ARGS__);
VLAs in C appear to not work on Windows, so use COMPILER_RT_ALLOCA:
C:\b\slave\sanitizer-windows\llvm-project\compiler-rt\lib\profile\InstrProfilingWriter.c(264): error C2057: expected constant expression
C:\b\slave\sanitizer-windows\llvm-project\compiler-rt\lib\profile\InstrProfilingWriter.c(264): error C2466: cannot allocate an array of constant size 0
C:\b\slave\sanitizer-windows\llvm-project\compiler-rt\lib\profile\InstrProfilingWriter.c(264): error C2133: 'Zeroes': unknown size
Add support for continuously syncing profile counter updates to a file.
The motivation for this is that programs do not always exit cleanly. On
iOS, for example, programs are usually killed via a signal from the OS.
Running atexit() handlers after catching a signal is unreliable, so some
method for progressively writing out profile data is necessary.
The approach taken here is to mmap() the `__llvm_prf_cnts` section onto
a raw profile. To do this, the linker must page-align the counter and
data sections, and the runtime must ensure that counters are mapped to a
page-aligned offset within a raw profile.
Continuous mode is (for the moment) incompatible with the online merging
mode. This limitation is lifted in https://reviews.llvm.org/D69586.
Continuous mode is also (for the moment) incompatible with value
profiling, as I'm not sure whether there is interest in this and the
implementation may be tricky.
As I have not been able to test extensively on non-Darwin platforms,
only Darwin support is included for the moment. However, continuous mode
may "just work" without modification on Linux and some UNIX-likes. AIUI
the default value for the GNU linker's `--section-alignment` flag is set
to the page size on many systems. This appears to be true for LLD as
well, as its `no_nmagic` option is on by default. Continuous mode will
not "just work" on Fuchsia or Windows, as it's not possible to mmap() a
section on these platforms. There is a proposal to add a layer of
indirection to the profile instrumentation to support these platforms.
rdar://54210980
Differential Revision: https://reviews.llvm.org/D68351
Summary:
cferris@ found an issue due to the new Secondary free list behavior
and unfortunately it's completely my fault. The issue is twofold:
- I lost track of the (major) fact that the Combined assumes that
all chunks returned by the Secondary are zero'd out apprioriately
when dealing with `ZeroContents`. With the introduction of the
freelist, it's no longer the case as there can be a small portion
of memory between the header and the next page boundary that is
left untouched (the rest is zero'd via release). So the next time
that block is returned, it's not fully zero'd out.
- There was no test that would exercise that behavior :(
There are several ways to fix this, the one I chose makes the most
sense to me: we pass `ZeroContents` to the Secondary's `allocate`
and it zero's out the block if requested and it's coming from the
freelist. The prevents an extraneous `memset` in case the block
comes from `map`. Another possbility could have been to `memset`
in `deallocate`, but it's probably overzealous as all secondary
blocks don't need to be zero'd out.
Add a test that would have found the issue prior to fix.
Reviewers: morehouse, hctim, cferris, pcc, eugenis, vitalybuka
Subscribers: #sanitizers, llvm-commits
Tags: #sanitizers, #llvm
Differential Revision: https://reviews.llvm.org/D69675
Summary:
xcodebuild does not work unless XCode is installed whereas xcrun also work
when only the Command Line Tools are installed. Unlike the check for the
version (D69610), this did not cause an erro for me since the fallback to
/usr/include for the OSX sysroot worked.
Reviewers: yln, delcypher
Reviewed By: yln
Subscribers: dberris, mgorny, #sanitizers, llvm-commits
Tags: #sanitizers, #llvm
Differential Revision: https://reviews.llvm.org/D69659
Summary:
Starting with 8a5bfbe6db (D68292) this file
unconditionally uses xcodebuild to get the SDK version. On my system this
always fails with
`xcode-select: error: tool 'xcodebuild' requires Xcode, but active developer directory '/Library/Developer/CommandLineTools' is a command line tools instance`
Reviewers: delcypher, yln
Reviewed By: delcypher, yln
Subscribers: dberris, mgorny, #sanitizers, llvm-commits
Tags: #sanitizers, #llvm
Differential Revision: https://reviews.llvm.org/D69610
Summary:
Sometimes an allocation stack trace is not very informative. Provide a
way to replace it with a stack trace of the user's choice.
Reviewers: pcc, kcc
Subscribers: #sanitizers, llvm-commits
Tags: #sanitizers, #llvm
Differential Revision: https://reviews.llvm.org/D69208
Summary:
Previously the CMake code looked for filepaths of the form
`<arch>/<filename>` as an indication that `<arch>/<filename>` provided a
specialization of a top-level file `<filename>`. For powerpc there was a
bug because the powerpc specialized implementations lived in `ppc/` but
the architectures were `powerpc64` and `powerpc64le` which meant that
CMake was looking for files at `powerpc64/<filename>` and
`powerpc64le/<filename>`.
The result of this is that for powerpc the builtins library contained a
duplicate symbol for `divtc3` because it had the generic implementation
and the specialized version in the built static library.
Although we could just add similar code to what there is for arm (i.e.
compute `${_arch}`) to fix this, this is extremely error prone (until
r375150 no error was raised). Instead this patch takes a different
approach that removes looking for the architecture name entirely.
Instead this patch uses the convention that a source file in a
sub-directory might be a specialization of a generic implementation and
if a source file of the same name (ignoring extension) exists at the
top-level then it is the corresponding generic implementation. This
approach is much simpler because it doesn't require keeping track of
different architecture names.
This convention already existed in repository but previously it was
implicit. This change makes it explicit.
This patch is motivated by wanting to revert r375162 which worked around
the powerpc bug found when r375150 landed.
Once it lands we should revert r375162.
Reviewers: phosek, beanz, compnerd, shiva0217, amyk, rupprecht, kongyi, mstorsjo, t.p.northover, weimingz, jroelofs, joerg, sidneym
Subscribers: nemanjai, mgorny, kristof.beyls, jsji, shchenz, steven.zhang, #sanitizers, llvm-commits
Tags: #llvm, #sanitizers
Differential Revision: https://reviews.llvm.org/D69189
Summary:
The flag allows the user to specify a maximum allocation size that the
sanitizers will honor. Any larger allocations will return nullptr or
crash depending on allocator_may_return_null.
Reviewers: kcc, eugenis
Reviewed By: kcc, eugenis
Subscribers: #sanitizers, llvm-commits
Tags: #sanitizers, #llvm
Differential Revision: https://reviews.llvm.org/D69576
Summary:
The secondary allocator is slow, because we map and unmap each block
on allocation and deallocation.
While I really like the security benefits of such a behavior, this
yields very disappointing performance numbers on Android for larger
allocation benchmarks.
So this change adds a free list to the secondary, that will hold
recently deallocated chunks, and (currently) release the extraneous
memory. This allows to save on some memory mapping operations on
allocation and deallocation. I do not think that this lowers the
security of the secondary, but can increase the memory footprint a
little bit (RSS & VA).
The maximum number of blocks the free list can hold is templatable,
`0U` meaning that we fallback to the old behavior. The higher that
number, the higher the extra memory footprint.
I added default configurations for all our platforms, but they are
likely to change in the near future based on needs and feedback.
Reviewers: hctim, morehouse, cferris, pcc, eugenis, vitalybuka
Subscribers: mgorny, #sanitizers, llvm-commits
Tags: #sanitizers, #llvm
Differential Revision: https://reviews.llvm.org/D69570
Summary:
The hwasan interceptor ABI doesn't have interceptors for longjmp and setjmp.
This patch introduces them.
We require the size of the jmp_buf on the platform to be at least as large as
the jmp_buf in our implementation. To enforce this we compile
hwasan_type_test.cpp that ensures a compile time failure if this is not true.
Tested on both GCC and clang using an AArch64 virtual machine.
Reviewers: eugenis, kcc, pcc, Sanatizers
Reviewed By: eugenis, Sanatizers
Tags: #sanatizers, #llvm
Differential Revision: https://reviews.llvm.org/D69045
Patch By: Matthew Malcomson <matthew.malcomson@arm.com>
Summary:
When the ABI namespace isn't a reserved identifier, we were issuing a
warning, but this should have been an error since the beginning. This
commit enforces that the ABI namespace is a reserved identifier, and
changes the ABI namespace used by LibFuzzer.
Reviewers: phosek, EricWF
Subscribers: mgorny, christof, jkorous, dexonsmith, #sanitizers, libcxx-commits, llvm-commits
Tags: #sanitizers, #libc, #llvm
Differential Revision: https://reviews.llvm.org/D69408
Summary:
Apparently during the review of D69265, and my flailing around with
git, a somewhat important line disappeared.
On top of that, there was no test exercising that code path, and
while writing the follow up patch I intended to write, some `CHECK`s
were failing.
Re-add the missing line, and add a test that fails without said line.
Reviewers: hctim, morehouse, pcc, cferris
Reviewed By: hctim
Subscribers: #sanitizers, llvm-commits
Tags: #sanitizers, #llvm
Differential Revision: https://reviews.llvm.org/D69529
Do not add an lld dependency when this target does not exist. In this
case the system installation of lld is used (or whatever is detected
with -fuse-ld=lld by default).
Summary:
This is a clean patch using the last diff of D69265, but using git
instead of svn, since svn went ro and arc was making my life harded
than it needed to be.
I was going to introduce a couple more lists and realized that our
lists are currently a bit all over the place. While we have a singly
linked list type relatively well defined, we are using doubly linked
lists defined on the fly for the stats and for the secondary blocks.
This CL adds a doubly linked list object, reorganizing the singly list
one to extract as much of the common code as possible. We use this
new type in the stats and the secondary. We also reorganize the list
tests to benefit from this consolidation.
There are a few side effect changes such as using for iterator loops
that are, in my opinion, cleaner in a couple of places.
Reviewers: hctim, morehouse, pcc, cferris
Reviewed By: hctim
Subscribers: jfb, #sanitizers, llvm-commits
Tags: #sanitizers, #llvm
Differential Revision: https://reviews.llvm.org/D69516
Use new control bits CTR_EL0.DIC and CTR_EL0.IDC to discover the d-cache
cleaning and i-cache invalidation requirements for instruction-to-data
coherence. This matches the behavior in the latest libgcc.
Author: Shaokun Zhang <zhangshaokun@hisilicon.com>
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D69247
In cmake, if TEST_COMPILE_ONLY is set
compiler-rt/cmake/Modules/CompilerRTDarwinUtils.cmake invokes try_compile_only()
but try_compile_only() is defined in BuiltinTests.cmake and is not included in
CompilerRTDarwinUtils.cmake. This patch simply includes it BuiltinTests.
Differential Revision: https://reviews.llvm.org/D69410
Summary:
Right now all hwasan tests on Android are silently disabled because they
require "has_lld" and standalone compiler-rt can not (and AFAIK was
never able to) set it.
Reviewers: pcc
Subscribers: dberris, mgorny, #sanitizers, llvm-commits
Tags: #sanitizers, #llvm
Differential Revision: https://reviews.llvm.org/D69405
Alexandre Ganea