When a '>>' token is split into two '>' tokens (in C++11 onwards), or (as an
extension) when we do the same for other tokens starting with a '>', we can't
just use a location pointing to the first '>' as the location of the split
token, because that would result in our miscomputing the length and spelling
for the token. As a consequence, for example, a refactoring replacing 'A<X>'
with something else would sometimes replace one character too many, and
similarly diagnostics highlighting a template-id source range would highlight
one character too many.
Fix this by creating an expansion range covering the first character of the
'>>' token, whose spelling is '>'. For this to work, we generalize the
expansion range of a macro FileID to be either a token range (the common case)
or a character range (used in this new case).
llvm-svn: 331155
Found via codespell -q 3 -I ../clang-whitelist.txt
Where whitelist consists of:
archtype
cas
classs
checkk
compres
definit
frome
iff
inteval
ith
lod
methode
nd
optin
ot
pres
statics
te
thru
Patch by luzpaz! (This is a subset of D44188 that applies cleanly with a few
files that have dubious fixes reverted.)
Differential revision: https://reviews.llvm.org/D44188
llvm-svn: 329399
'adjustRemovals' is used to avoid situation when removing a range inadvertently causes 2 separate identifiers to get joined into one.
But it is not useful when the edits are character precise, as is the case with the remap files.
llvm-svn: 301602
Aleksey Shlypanikov pointed out my mistake in migrating an explicit
unique_ptr to auto - I was expecting the function returned a unique_ptr,
but instead it returned a raw pointer - introducing a leak.
Thanks Aleksey!
This reapplies r291184, reverted in r291249.
llvm-svn: 291270
Add "enum ObjCPropertyQueryKind" to a few APIs that used to only take the name
of the property: ObjCPropertyDecl::findPropertyDecl,
ObjCContainerDecl::FindPropertyDeclaration,
ObjCInterfaceDecl::FindPropertyVisibleInPrimaryClass,
ObjCImplDecl::FindPropertyImplDecl, and Sema::ActOnPropertyImplDecl.
ObjCPropertyQueryKind currently has 3 values:
OBJC_PR_query_unknown, OBJC_PR_query_instance, OBJC_PR_query_class
This extra parameter specifies that we are looking for an instance property with
the given name, or a class property with the given name, or any property with
the given name (if both exist, the instance property will be returned).
rdar://23891898
llvm-svn: 259070
Summary:
This patch is provided in preparation for removing autoconf on 1/26. The proposal to remove autoconf on 1/26 was discussed on the llvm-dev thread here: http://lists.llvm.org/pipermail/llvm-dev/2016-January/093875.html
"This is the way [autoconf] ends
Not with a bang but a whimper."
-T.S. Eliot
Reviewers: chandlerc, grosbach, bob.wilson, echristo
Subscribers: klimek, cfe-commits
Differential Revision: http://reviews.llvm.org/D16472
llvm-svn: 258862
All current properties are instance properties.
This is the second patch in a series of patches to support class properties
in addition to instance properties in objective-c.
rdar://23891898
llvm-svn: 258824
A 'readonly' Objective-C property declared in the primary class can
effectively be shadowed by a 'readwrite' property declared within an
extension of that class, so long as the types and attributes of the
two property declarations are compatible.
Previously, this functionality was implemented by back-patching the
original 'readonly' property to make it 'readwrite', destroying source
information and causing some hideously redundant, incorrect
code. Simplify the implementation to express how this should actually
be modeled: as a separate property declaration in the extension that
shadows (via the name lookup rules) the declaration in the primary
class. While here, correct some broken Fix-Its, eliminate a pile of
redundant code, clean up the ARC migrator's handling of properties
declared in extensions, and fix debug info's naming of methods that
come from categories.
A wonderous side effect of doing this write is that it eliminates the
"AddedObjCPropertyInClassExtension" method from the AST mutation
listener, which in turn eliminates the last place where we rewrite
entire declarations in a chained PCH file or a module file. This
change (which fixes rdar://problem/18475765) will allow us to
eliminate the rewritten-decls logic from the serialization library,
and fixes a crash (rdar://problem/23247794) illustrated by the
test/PCH/chain-categories.m example.
llvm-svn: 251874
This sets the mostly expected Darwin default ABI options for these two
platforms. Active changes from these defaults for watchOS are in a later patch.
llvm-svn: 251708
Previously, __weak was silently accepted and ignored in MRC mode.
That makes this a potentially source-breaking change that we have to
roll out cautiously. Accordingly, for the time being, actual support
for __weak references in MRC is experimental, and the compiler will
reject attempts to actually form such references. The intent is to
eventually enable the feature by default in all non-GC modes.
(It is, of course, incompatible with ObjC GC's interpretation of
__weak.)
If you like, you can enable this feature with
-Xclang -fobjc-weak
but like any -Xclang option, this option may be removed at any point,
e.g. if/when it is eventually enabled by default.
This patch also enables the use of the ARC __unsafe_unretained qualifier
in MRC. Unlike __weak, this is being enabled immediately. Since
variables are essentially __unsafe_unretained by default in MRC,
the only practical uses are (1) communication and (2) changing the
default behavior of by-value block capture.
As an implementation matter, this means that the ObjC ownership
qualifiers may appear in any ObjC language mode, and so this patch
removes a number of checks for getLangOpts().ObjCAutoRefCount
that were guarding the processing of these qualifiers. I don't
expect this to be a significant drain on performance; it may even
be faster to just check for these qualifiers directly on a type
(since it's probably in a register anyway) than to do N dependent
loads to grab the LangOptions.
rdar://9674298
llvm-svn: 251041
Summary: It breaks the build for the ASTMatchers
Subscribers: klimek, cfe-commits
Differential Revision: http://reviews.llvm.org/D13893
llvm-svn: 250827
After r244870 flush() will only compare two null pointers and return,
doing nothing but wasting run time. The call is not required any more
as the stream and its SmallString are always in sync.
Thanks to David Blaikie for reviewing.
llvm-svn: 244928
In llvm commit r243581, a reverse range adapter was added which allows
us to change code such as
for (auto I = Fields.rbegin(), E = Fields.rend(); I != E; ++I) {
in to
for (const FieldDecl *I : llvm::reverse(Fields))
This commit changes a few of the places in clang which are eligible to use
this new adapter.
llvm-svn: 243663
StmtRange was just a convenient wrapper for two StmtIterators before
we had real range support. This removes some of the implicit conversions
StmtRange had leading to slightly more verbose code but also should make
more obvious what's going on. No functional change intended.
llvm-svn: 242615
- introduces a new cc1 option -fmodule-format=[raw,obj]
with 'raw' being the default
- supports arbitrary module container formats that libclang is agnostic to
- adds the format to the module hash to avoid collisions
- splits the old PCHContainerOperations into PCHContainerWriter and
a PCHContainerReader.
Thanks to Richard Smith for reviewing this patch!
llvm-svn: 242499
The patch is generated using this command:
$ tools/extra/clang-tidy/tool/run-clang-tidy.py -fix \
-checks=-*,llvm-namespace-comment -header-filter='llvm/.*|clang/.*' \
work/llvm/tools/clang
To reduce churn, not touching namespaces spanning less than 10 lines.
llvm-svn: 240270
A PCHContainerOperations abstract interface provides operations for
creating and unwrapping containers for serialized ASTs (precompiled
headers and clang modules). The default implementation is
RawPCHContainerOperations, which uses a flat file for the output.
The main application for this interface will be an
ObjectFilePCHContainerOperations implementation that uses LLVM to
wrap the module in an ELF/Mach-O/COFF container to store debug info
alongside the AST.
rdar://problem/20091852
llvm-svn: 240225
If the type isn't trivially moveable emplace can skip a potentially
expensive move. It also saves a couple of characters.
Call sites were found with the ASTMatcher + some semi-automated cleanup.
memberCallExpr(
argumentCountIs(1), callee(methodDecl(hasName("push_back"))),
on(hasType(recordDecl(has(namedDecl(hasName("emplace_back")))))),
hasArgument(0, bindTemporaryExpr(
hasType(recordDecl(hasNonTrivialDestructor())),
has(constructExpr()))),
unless(isInTemplateInstantiation()))
No functional change intended.
llvm-svn: 238601
Modules builds fundamentally have a non-linear macro history. In the interest
of better source fidelity, represent the macro definition information
faithfully: we have a linear macro directive history within each module, and at
any point we have a unique "latest" local macro directive and a collection of
visible imported directives. This also removes the attendent complexity of
attempting to create a correct MacroDirective history (which we got wrong
in the general case).
No functionality change intended.
llvm-svn: 236176
Richard Smith