This goes through all the calls to `Report(...)` to make sure that each
one would have a newline at the end of the message for readability.
llvm-svn: 287736
/proc/self/maps can't be read atomically, this leads to episodic
crashes in libignore as it thinks that a module is loaded twice.
See the new test for an example.
dl_iterate_phdr does not have this problem.
Switch libignore to dl_iterate_phdr.
llvm-svn: 287632
The ODR detection in initialization-bug.cc now works on Darwin (due to the recently enabled "live globals" on-by-default), but only if the deployment target is 10.11 or higher. Let's adjust the testcases.
Differential Revision: https://reviews.llvm.org/D26927
llvm-svn: 287581
Summary:
Turns out that in the case of -fsanitize=null and a virtual call,
the type check was generated *after* reading from vtable, which
causes a non-interpretable segfault. The check has been moved up
in https://reviews.llvm.org/D26559 and this CL adds a test for this case.
Reviewers: pcc
Subscribers: cfe-commits, kubabrecka
Differential Revision: https://reviews.llvm.org/D26560
llvm-svn: 287578
When building with clang/LLVM in MSVC mode, the msvcrt libraries contain
these functions.
When building in a mingw environment, we need to provide them somehow,
e.g. via compiler-rt.
The aeabi divmod functions work in the same way as the corresponding
__rt_*div* functions for windows, but their parameters are swapped.
The functions for converting float to integer and vice versa are the
same as their aeabi equivalents, only with different function names.
Differential Revision: https://reviews.llvm.org/D26183
llvm-svn: 287465
We're seeying these errors with GCC and Clang on different systems, while
some other identical OSs on different boards fail. Like many other ASAN
tests, there seem to be no easy way to investigate this other than someone
familiar with the sanitizer code and the ARM libraries.
At least, for now, we'll silence the bots. I'll create a bugzilla entry.
llvm-svn: 287464
Summary: The new name better corresponds to its logic.
Reviewers: kcc
Subscribers: kubabrecka
Differential Revision: https://reviews.llvm.org/D26821
llvm-svn: 287377
When the C unwinding personality was corrected to match the ARM EHABI
specification, the unwind header in clang was updated with necessary
declarations. However, when building with an older compiler, we would not have
the necessary declarations. This would result in a build failure. Provide a
supplementary header to ensure that the necessary declarations are present for
the build of the C unwinding personality.
Note that this is NOT an ABI break. It merely is a compile time failure due to
the constants not being present. The constants here are reproduced
equivalently. This header should permit building with clang[<3.9] as well as
gcc.
Addresses PR31035!
llvm-svn: 287359
Summary:
The expectation is that new instrumented code will add global variable
metadata to the .ASAN$GL section, and we will use this new code to
iterate over it.
This technique seems to break when using incremental linking, which
seems to align every global to a 256 byte boundary. Presumably this is
so that it can incrementally cope with global changing size. Clang
already passes -incremental:no as a linker flag when you invoke it to do
the link step.
The two tests added for this feature will fail until the LLVM
instrumentation change in D26770 lands, so they are marked XFAIL for
now.
Reviewers: pcc, kcc, mehdi_amini, kubabrecka
Subscribers: llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D26771
llvm-svn: 287246
Use the __SSE2__ to determine whether SSE2 is enabled in the ASAN tests
rather than relying on either of the __i686__ and __x86_64__. The former
is only set with explicit -march=i686, and therefore misses most of
the x86 CPUs that support SSE2. __SSE2__ is in turn defined if
the current settings (-march, -msse2) indicate that SSE2 is supported
which should be more reliable.
Differential Revision: https://reviews.llvm.org/D26763
llvm-svn: 287245
Include xray_defs.h in xray_arm.cc (seems to be the only one that doesn't
include it).
Buildbot errors:
[...]/compiler-rt/lib/xray/xray_arm.cc:31:58: error: expected initializer before 'XRAY_NEVER_INSTRUMENT'
inline static uint32_t getMovwMask(const uint32_t Value) XRAY_NEVER_INSTRUMENT {
llvm-svn: 287089
Summary:
Adds a CMake check for whether the compiler used to build the XRay
library supports XRay-instrumentation. If the compiler we're using does
support the `-fxray-instrument` flag (i.e. recently-built Clang), we
define the XRAY_NEVER_INSTRUMENT macro that then makes sure that the
XRay runtime functions never get XRay-instrumented.
This prevents potential weirdness involved with building the XRay
library with a Clang that supports XRay-instrumentation, and is
attempting to XRay-instrument the build of compiler-rt.
Reviewers: majnemer, rSerge, echristo
Subscribers: mehdi_amini, llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D26597
llvm-svn: 287068
Users often have their own unhandled exception filters installed. ASan
already goes to great lengths to install its own filter, but our core
wars with Chrome crashpad have escalated to the point that its time to
declare a truce. By exposing this hook, they can call us directly when
they want ASan crash reporting without worrying about who initializes
when.
llvm-svn: 287040
On Darwin, we're running the TSan unit tests without interceptors. To make sure TSan observes all the pthread events (thread creating, thread join, condvar signal, etc.) in tsan_posix.cc, we should call the pthread interceptors directly, as we already do in tsan_test_util_posix.cc. This fixes some flaky failures on Darwin bots.
Differential Revision: https://reviews.llvm.org/D26639
llvm-svn: 287026
Summary:
In a 32-bit address space, PC-relative jump targets are wrapped, so a
direct branch at 0x90000001 can reach address 0x10000000 with a
displacement of 0x7FFFFFFFF. This can happen in applications, such as
Chrome, that are linked with /LARGEADDRESSAWARE.
Reviewers: etienneb
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D26650
llvm-svn: 286997
This adds support for TSan C++ exception handling, where we need to add extra calls to __tsan_func_exit when a function is exitted via exception mechanisms. Otherwise the shadow stack gets corrupted (leaked). This patch moves and enhances the existing implementation of EscapeEnumerator that finds all possible function exit points, and adds extra EH cleanup blocks where needed.
Differential Revision: https://reviews.llvm.org/D26177
llvm-svn: 286894
It's not a good idea to build the sanitizers with e.g. -DCMAKE_OSX_DEPLOYMENT_TARGET=10.12, because some deprecated functions that we intercept will cause build errors. Let's limit the allowed deployment targets to 10.9 (which is the default anyway), and warn when it's set above.
Differential Revision: https://reviews.llvm.org/D26557
llvm-svn: 286859
Summary:
ASan needs to initialize before ucrtbase.dll so that it can intercept
all of its heap allocations. New versions of dbghelp.dll depend on
ucrtbase.dll, which means both of those DLLs will initialize before the
dynamic ASan runtime. By lazily loading dbghelp.dll with LoadLibrary, we
avoid the issue.
Eventually, I would like to remove our dbghelp.dll dependency in favor
of always using llvm-symbolizer.exe, but this seems like an acceptable
interim solution.
Fixes PR30903
Reviewers: etienneb
Subscribers: kubabrecka, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D26473
llvm-svn: 286848
This patch replaces fprintf with print_address function in LSAN
tests. This is necessary because of different printing of pointers
in fprintf and sanitizer's print function.
Differential Revision: https://reviews.llvm.org/D26084.
llvm-svn: 286816
Summary:
In non-strict mode we will check memory access for both strings from beginning
to either:
1. 0-char
2. size
3. different chars
In strict mode we will check from beginning to either:
1. 0-char
2. size
Previously in strict mode we always checked up to the 0-char.
Reviewers: kcc, eugenis
Subscribers: llvm-commits, kubabrecka
Differential Revision: https://reviews.llvm.org/D26574
llvm-svn: 286708
Summary: Unit tests for the new clang flags.
Reviewers: eugenis, dvyukov
Subscribers: kubabrecka, llvm-commits
Patch by Alex Shlyapnikov.
Differential Revision: https://reviews.llvm.org/D26462
llvm-svn: 286670
This patch is needed to implement the function attribute that disable TSan checking at run time.
Differential Revision: https://reviews.llvm.org/D25859
llvm-svn: 286658
Changed the kernel sigaction structure in test syscalls_sigaction.cc for MIPS according to the structure defined in kernel.
Reviewed by eugenis.
Differential: https://reviews.llvm.org/D25814
llvm-svn: 286583
Now that we use TerminateProcess, the debugger doesn't stop on program
exit. Add this breakpoint so that the debugger stops after asan reports
an error and is prepared to exit the program.
llvm-svn: 286501
ExitProcess still runs some code which can lead to ASan interceptors
running after CHECK failure. This can lead to deadlock if it CHECK fails
again. Avoid that mess by really exiting immediately.
llvm-svn: 286395
I'm not sure why is it there, but it is breaking tests on Android N
because of unexpected linker output about an empty LD_LIBRARY_PATH
entry.
llvm-svn: 286321
Summary:
User applications may register hooks in the .CRT$XL* callback list,
which is called very early by the loader. This is very common in
Chromium:
https://cs.chromium.org/search/?q=CRT.XL&sq=package:chromium&type=cs
This has flown under the radar for a long time because the loader
appears to catch exceptions originating from these callbacks. It's a
real problem when you're debugging an asan application, though, since it
makes the program crash early.
The solution is to add our own callback to this list, and sort it very
early in the list like we do elsewhere. Also add a test with such an
instrumented callback, and test that it gets called with asan.
Reviewers: etienneb
Subscribers: llvm-commits, kubabrecka
Differential Revision: https://reviews.llvm.org/D26404
llvm-svn: 286290
Atomic stores terminate release sequences on the atomic variable,
and must use ReleaseStore primitive instead of Release.
This was broken in r192355 during a refactoring.
Restore correct behavior and add a test.
llvm-svn: 286211
asan_device_setup script is using LD_PRELOAD to inject the ASan
runtime library into the Zygote process. This breaks when the Zygote
or any of its descendants spawn a process with different bitness due
to the fact that the ASan-RT library name includes the target
architecture.
The fix is to preload the library through a symlink which has the
same name in lib and lib64.
llvm-svn: 286188
Although rare, atomic accesses to floating-point types seem to be valid, i.e. `%a = load atomic float ...`. The TSan instrumentation pass however tries to emit inttoptr, which is incorrect, we should use a bitcast here. Anyway, IRBuilder already has a convenient helper function for this.
Differential Revision: https://reviews.llvm.org/D26266
llvm-svn: 286136
Only tests using %clang_cl_asan were using the dynamic CRT before this.
The unit tests and lit tests using %clangxx_asan were using the static
CRT. Many cross-platform tests fail with the dynamic CRT, so I had to
add win32-(static|dynamic)-asan lit features.
Also deletes some redundant tests in TestCases/Windows that started
failing with this switch.
llvm-svn: 285821
Summary:
We define a new trampoline that's a hybrid between the exit and entry
trampolines with the following properties:
- Saves all of the callee-saved registers according to the x86_64
calling conventions.
- Indicate to the log handler function being called that this is a
function exit event.
This fixes a bug that is a result of not saving enough of the register
states, and that the log handler is clobbering registers that would be
used by the function being tail-exited into manifesting as runtime
errors.
Reviewers: rSerge, echristo, majnemer
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D26020
llvm-svn: 285787
Apparently, the std_shared_ptr.cc testcase works fine on Darwin, even without the instrumented libcxx. Let's enable it.
Differential Revision: https://reviews.llvm.org/D26162
llvm-svn: 285634
TSan’s memory usage profiling currently doesn’t work on Darwin. This patch implements measuring the amount of resident and dirty memory for each memory region. I also removed the GetShadowMemoryConsumption function, which seems to be unused.
Differential Revision: https://reviews.llvm.org/D25973
llvm-svn: 285630
On Darwin, simple C null-terminated constant strings normally end up in the __TEXT,__cstring section of the resulting Mach-O binary. When instrumented with ASan, these strings are transformed in a way that they cannot be in __cstring (the linker unifies the content of this section and strips extra NUL bytes, which would break instrumentation), and are put into a generic __const section. This breaks some of the tools that we have: Some tools need to scan all C null-terminated strings in Mach-O binaries, and scanning all the contents of __const has a large performance penalty. This patch instead introduces a special section, __asan_cstring which will now hold the instrumented null-terminated strings.
Differential Revision: https://reviews.llvm.org/D25026
llvm-svn: 285620
GCD (libdispatch) has a concept of “target queues”: Each queue has either an implicit or explicit target queue, where the task is handed over to when it’s time to execute it. For example, a concurrent queue can have a serial target queue (effectively making the first queue serial), or multiple queues can have the same serial target queue (which means tasks in all the queues are mutually excluded). Thus we need to acquire-release semantics on the full “chain” of target queues.
This patch changes the way we Acquire() and Release() when executing tasks in queues. Now we’ll walk the chain of target queues and synchronize on each queue that is serial (or when dealing with a barrier block). This should avoid false positives when using dispatch_set_target_queue().
Differential Revision: https://reviews.llvm.org/D25835
llvm-svn: 285613
Otherwise __asan_dynamic_memory_address will be zero during static
initialization and instrumented code will crash immediately.
Fixes PR30810
Patch by David Major
llvm-svn: 285600
ASan dead-strip support relies on a linker option that only exists
in 10.11 and later, so the LLVM instrumentation checks for the deployment
target. This test does not pass when clang is built to choose lower
deployment target by default but runs on newer host.
(Note, the REQUIRES: osx-ld64-live_support clause only checks the host
and not the target OS.)
Differential Revision: https://reviews.llvm.org/D26107
llvm-svn: 285482
The CMake build system had missed this macro as part of the build of the
builtins. This would result in the builtins exporting symbols which are
implemented in assembly with global visibility. Ensure that the assembly
optimized routines are given the same visibility as the C routines.
llvm-svn: 285477
There is a corner case reported in Go issue tracker:
https://github.com/golang/go/issues/17065
On darwin data/bss segments may not be aligned to page bounary
and mmap seems to be behaving differently than on linux
(shrinks instead of enlarge unaligned regions).
Explicitly round shadow to page bounary before mapping
to avoid any such problems.
llvm-svn: 285454
Go maps shadow memory lazily, so we don't have the huge multi-TB mapping.
Virtual memory consumption is proportional to normal memory usage.
Also in Go core dumps are enabled explicitly with GOTRACEBACK=crash,
if user explicitly requests a core that must be on purpose.
So don't disable core dumps by default.
llvm-svn: 285451
Currently we either define SANITIZER_GO for Go or don't define it at all for C++.
This works fine with preprocessor (ifdef/ifndef/defined), but does not work
for C++ if statements (e.g. if (SANITIZER_GO) {...}). Also this is different
from majority of SANITIZER_FOO macros which are always defined to either 0 or 1.
Always define SANITIZER_GO to either 0 or 1.
This allows to use SANITIZER_GO in expressions and in flag default values.
Also remove kGoMode and kCppMode, which were meant to be used in expressions,
but they are not defined in sanitizer_common code, so SANITIZER_GO become prevalent.
Also convert some preprocessor checks to C++ if's or ternary expressions.
Majority of this change is done mechanically with:
sed "s#ifdef SANITIZER_GO#if SANITIZER_GO#g"
sed "s#ifndef SANITIZER_GO#if \!SANITIZER_GO#g"
sed "s#defined(SANITIZER_GO)#SANITIZER_GO#g"
llvm-svn: 285443
Currently windows fails on startup with:
CHECK failed: gotsan.cc:3077 "(((m - prev_m) / kMetaShadowSize)) == (((p - prev) / kMetaShadowCell))" (0x3ffffffeffffff7e, 0x6ffffff7e)
Make MemToMeta do the same MemToShadow does on windows: add offset instead of or'ing it.
llvm-svn: 285420
There is possible deadlock in dynamic ASan runtime when we dlopen() shared lib
which creates a thread at the global initialization stage. The scenario:
1) dlopen grabs a GI_pthread_mutex_lock in main thread.
2) main thread calls pthread_create, ASan intercepts it, calls real pthread_create
and waits for the second thread to be "fully initialized".
3) Newly created thread tries to access a thread local disable_counter in LSan
(to complete its "full initialization") and hangs in tls_get_addr_tail, because
it also tries to acquire GI_pthread_mutex_lock.
The issue is reproducible on relative recent Glibc versions e.g. 2.23.
Differential Revision: https://reviews.llvm.org/D26028
llvm-svn: 285385
Looks like we are missing these flags only in tsan and sanitizer-common.
This results in linker warnings in some settings as it can cause the Unit
tests to be built with a different SDK version than that was used to build
the runtime. For example, we are not setting the minimal deployment target
on the tests but are setting the minimal deployment target for the sanitizer
library, which leads to the following warning on some bots: ld: warning:
object file (sanitizer_posix_test.cc.i386.o) was built for newer OSX version
(10.12) than being linked (10.11).
Differential Revision: https://reviews.llvm.org/D25860https://reviews.llvm.org/D25352
llvm-svn: 285255
Summary:
In order to support 32-bit platforms, we have to make some adjustments in
multiple locations, one of them being the Scudo chunk header. For it to fit on
64 bits (as a reminder, on x64 it's 128 bits), I had to crunch the space taken
by some of the fields. In order to keep the offset field small, the secondary
allocator was changed to accomodate aligned allocations for larger alignments,
hence making the offset constant for chunks serviced by it.
The resulting header candidate has been added, and further modifications to
allow 32-bit support will follow.
Another notable change is the addition of MaybeStartBackgroudThread() to allow
release of the memory to the OS.
Reviewers: kcc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25688
llvm-svn: 285209
The test contains a switch statement in which two of the cases are
tail-merged, with the call to __ubsan_handle_dynamic_type_cache_miss_abort
in the common tail. When tail-merging occurs, the debug location of the
tail is randomly taken from one of the merge inputs. Luckily for the test,
the expected line number in the check is the one which is chosen by the
tail-merge. However, if the switch cases are re-ordered the test will
fail.
This patch disables tail-merge, making the test resilient to changes
in tail-merge, and unblocking review D25742. It does not change the
semantics of the test.
llvm-svn: 285208
clear_cache is using R7 for the SVC call and that's the frame pointer in
GCC, which is only disabled on -O2/3, so Release builds finish, Debug don't.
Fixes PR30797.
llvm-svn: 285204
Summary: Newer versions of clang complain that __asan_schedule_unregister_globals is unused. Moving it outside the anonymous namespace gets rid of that warning.
Reviewers: rnk, timurrrr
Subscribers: kubabrecka, dberris
Differential Revision: https://reviews.llvm.org/D25921
llvm-svn: 285010
Darwin's implementation of strstr seems to trigger slightly different failure
modes from Linux since it calls strncmp. All messages seem about equally useful
and correct, so I relaxed the tests so Darwin can pass.
llvm-svn: 285004
This patch replaces fprintf with print_address function
in LSAN tests. This is necessary because of different
printing of pointers in fprintf and sanitizer's print
function. Differential Revision: https://reviews.llvm.org/D25270.
llvm-svn: 284722
This makes __llvm_profile_set_filename() work across dylib boundaries on
Darwin.
This functionality was originally meant to work on all platforms, but
was moved to a Linux-only directory with r272404. The root cause of the
test failure on Darwin was that lprofCurFilename was not marked weak.
Each dylib maintained its own copy of the variable due to the two-level
namespace.
Tested with check-profile (on Darwin). I don't expect this to regress
other platforms.
Differential Revision: https://reviews.llvm.org/D25707
llvm-svn: 284440
Summary:
This change depends on D23986 which adds tail call-specific sleds. For
now we treat them first as normal exits, and in the future leave room
for implementing this as a different kind of log entry.
The reason for deferring the change is so that we can keep the naive
logging implementation more accurate without additional complexity for
reading the log. The accuracy is gained in effectively interpreting call
stacks like:
A()
B()
C()
Which when tail-call merged will end up not having any exit entries for
A() nor B(), but effectively in turn can be reasoned about as:
A()
B()
C()
Although we lose the fact that A() had called B() then had called C()
with the naive approach, a later iteration that adds the explicit tail
call entries would be a change in the log format and thus necessitate a
version change for the header. We can do this later to have a chance at
releasing some tools (in D21987) that are able to handle the naive log
format, then support higher version numbers of the log format too.
Reviewers: echristo, kcc, rSerge, majnemer
Subscribers: mehdi_amini, llvm-commits, dberris
Differential Revision: https://reviews.llvm.org/D23988
llvm-svn: 284178
Summary:
LeakSanitizer does not work with ptrace but currently it
will print warnings (only under verbosity=1) and then proceed
to print tons of false reports.
This patch makes lsan fail hard under ptrace with a verbose message.
https://github.com/google/sanitizers/issues/728
Reviewers: eugenis, vitalybuka, aizatsky
Subscribers: kubabrecka, llvm-commits
Differential Revision: https://reviews.llvm.org/D25538
llvm-svn: 284171
Some of our existing tests hang on the new Windows bot with this stack:
770, clang_rt.asan_dynamic-i386.dll!__asan::AsanTSDGet+0x3e
771, clang_rt.asan_dynamic-i386.dll!__asan::GetCurrentThread+0x9
772, clang_rt.asan_dynamic-i386.dll!__asan_handle_no_return+0xe
773, clang_rt.asan_dynamic-i386.dll!__asan_wrap__except_handler4_common+0x12
774, ntdll.dll!wcstombs+0xb0 (No unwind info)
775, ntdll.dll!ZwWow64CallFunction64+0x2001 (No unwind info)
776, ntdll.dll!ZwWow64CallFunction64+0x1fd3 (No unwind info)
777, ntdll.dll!KiUserExceptionDispatcher+0xf (No unwind info)
778, clang_rt.asan_dynamic-i386.dll!destroy_fls+0x13
779, ntdll.dll!RtlLockHeap+0xea (No unwind info)
780, ntdll.dll!LdrShutdownProcess+0x7f (No unwind info)
781, ntdll.dll!RtlExitUserProcess+0x81 (No unwind info)
782, kernel32.dll!ExitProcess+0x13 (No unwind info)
783, clang_rt.asan_dynamic-i386.dll!__sanitizer::internal__exit+0xc
784, clang_rt.asan_dynamic-i386.dll!__sanitizer::Die+0x3d
785, clang_rt.asan_dynamic-i386.dll!__asan::AsanInitInternal+0x50b
786, clang_rt.asan_dynamic-i386.dll!__asan::Allocator::Allocate+0x1c
787, clang_rt.asan_dynamic-i386.dll!__asan::Allocator::Calloc+0x43
We hang because AsanDie tries to defend against multi-threaded death by
infinite looping if someone is already exiting. We might want to
reconsider that, but one easy way to avoid getting here is not to let
our noreturn interceptors call back into fragile parts of ASan.
llvm-svn: 284067
Sanitizers are intentionally not including system headers and often declare slightly different function prototypes, which is incompatible with -fmodules and -fcxx-modules. Let’s simply exclude compiler-rt from using -fmodules.
Differential Revision: https://reviews.llvm.org/D25230
llvm-svn: 283658
Used uptr for __sanitizer_kernel_sigset_t.sig to avoid byte order issues on big endian systems
Reviewd by bruening.
Differential: D24332
llvm-svn: 283438
The VM layout is not stable between iOS version releases, so switch to dynamic shadow offset.
Differential Revision: https://reviews.llvm.org/D25218
llvm-svn: 283375
Reapply 282061.
One of the tests relying on sem_t's layout gets the wrong value for versions of
glibc newer than 2.21 on platforms that don't have 64-bit atomics (e.g. ARM).
This commit fixes the test to work with:
* versions of glibc >= 2.21 on platforms with 64-bit atomics: unchanged
* versions of glibc >= 2.21 on platforms without 64-bit atomics: the semaphore
value is shifted by SEM_VALUE_SHIFT (which is set to 1 in glibc's internal
headers)
* versions of glibc < 2.21: unchanged
The logic is complicated a bit by the fact that the sanitizers always pick the
oldest version of the symbol available in glibc, which creates discrepancies
between old platforms which contain several versions od the sem_init symbol, and
newer platforms which contain only one.
See the glibc 2.23 sources:
* sysdeps/nptl/internaltypes.h (struct new_sem for glibc >= 2.21 and
struct old_sem for glibc < 2.21)
* nptl/sem_getvalue.c
This was uncovered on one of the new buildbots that we are trying to move to
production.
Differential Revision: https://reviews.llvm.org/D24766
llvm-svn: 283299
The VM layout is not stable between iOS version releases, so switch to dynamic shadow offset.
Differential Revision: https://reviews.llvm.org/D25218
llvm-svn: 283240
Summary:
Handles early allocation from dlsym by allocating memory from a local
static buffer.
Reviewers: bruening
Subscribers: kubabrecka
Differential Revision: https://reviews.llvm.org/D25193
llvm-svn: 283139
Summary:
s/CHECK_LT/CHECK_LE/ in the secondary allocator, as under certain circumstances
Ptr + Size can be equal to MapEnd. This edge case was not found by the current
tests, so those were extended to be able to catch that.
Reviewers: kcc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25101
llvm-svn: 282913
Summary:
The check-asan-dynamic tests were broken on win10 because the interception
library was not able to hook on some functions.
credits: thanks sebastian marchand to help debugging this on win10.
Reviewers: rnk
Subscribers: chrisha, llvm-commits, dberris
Differential Revision: https://reviews.llvm.org/D25120
llvm-svn: 282904
Summary:
This patch is adding support for dynamic shadow allocation.
This is a merge and re-commit of the following patches.
```
[compiler-rt] Fix Asan build on Android
https://reviews.llvm.org/D24768
[compiler-rt] Add support for the dynamic shadow allocation
https://reviews.llvm.org/D23363
```
This patch needed to re-land at the same time:
```
[asan] Support dynamic shadow address instrumentation
https://reviews.llvm.org/D23354
```
Reviewers: rnk, zaks.anna
Subscribers: tberghammer, danalbert, kubabrecka, dberris, chrisha, llvm-commits
Differential Revision: https://reviews.llvm.org/D25104
llvm-svn: 282882
Summary:
This test is broken on wndows 64-bit.
The interception library is not able to hook on the memchr functions.
Snippet of the function that is not hookable:
```
--- No source file -------------------------------------------------------------
000007FEFA1A18CD CC int 3
000007FEFA1A18CE CC int 3
000007FEFA1A18CF CC int 3
--- f:\dd\vctools\crt\vcruntime\src\string\amd64_arm_arm64\memchr.c ------------
while ( cnt && (*(unsigned char *)buf != (unsigned char)chr) ) {
000007FEFA1A18D0 4D 85 C0 test r8,r8
000007FEFA1A18D3 74 0D je memchr+12h (07FEFA1A18E2h)
000007FEFA1A18D5 38 11 cmp byte ptr [rcx],dl
000007FEFA1A18D7 74 09 je memchr+12h (07FEFA1A18E2h)
buf = (unsigned char *)buf + 1;
000007FEFA1A18D9 48 FF C1 inc rcx
cnt--;
000007FEFA1A18DC 49 83 E8 01 sub r8,1
000007FEFA1A18E0 75 F3 jne memchr+5h (07FEFA1A18D5h)
}
```
Reviewers: rnk
Subscribers: kubabrecka, dberris, llvm-commits, chrisha
Differential Revision: https://reviews.llvm.org/D25037
llvm-svn: 282860
Summary:
On windows, the memcpy and memmove function can be the same.
This is correcly detected when hooking, but it's not possible
to report the right function name when doing symbolisation.
The same fix was applied for the static asan unittest.
We forgot to apply the fix for the dynamic asan tests.
```
lvm\projects\compiler-rt\test\asan/TestCases/Windows/.svn/text-base/intercept_memcpy.cc.svn-base:// CHECK-NEXT: __asan_{{.*}}mem{{.*}}
```
This patch is fixing this test (win64):
```
ddressSanitizer-x86_64-windows-dynamic :: TestCases/Windows/dll_intercept_memcpy_indirect.cc
```
Reviewers: rnk, vitalybuka
Subscribers: llvm-commits, kubabrecka, chrisha, dberris
Differential Revision: https://reviews.llvm.org/D25038
llvm-svn: 282859
Summary:
The MSVC compiler is generating multiple instance of the exception handler
when compiling on win64 with /MD.
see: https://msdn.microsoft.com/en-us/library/2kzt1wy3.aspx
Two tests were failing when running:
```
ninja check-asan-dynamic.
```
The tests were failing because only the first occurence of the function was patched.
The function `__C_specific_handler` is defined in `ntdll` and `vcruntime140`.
After this patch, there is still two remaining tests failing.
```
********************
Testing: 0 .. 10.. 20.. 30.. 40.. 50.. 60.. 70.. 80.. 90..
Testing Time: 87.81s
********************
Failing Tests (2):
AddressSanitizer-x86_64-windows-dynamic :: TestCases/Windows/dll_intercept_memchr.cc
AddressSanitizer-x86_64-windows-dynamic :: TestCases/Windows/dll_intercept_memcpy_indirect.cc
Expected Passes : 342
Passes With Retry : 2
Expected Failures : 16
Unsupported Tests : 152
Unexpected Failures: 2
```
Reviewers: rnk, vitalybuka
Subscribers: vitalybuka, llvm-commits, chrisha, dberris
Differential Revision: https://reviews.llvm.org/D24983
llvm-svn: 282614
This patch extends __sanitizer_finish_switch_fiber method to optionally return previous stack base and size.
This solves the problem of coroutines/fibers library not knowing the original stack context from which the library is used. It's incorrect to assume that such context is always the default stack of current thread (e.g. one such library may be used from a fiber/coroutine created by another library). Bulding a separate stack tracking mechanism would not only duplicate AsanThread, but also require each coroutines/fibers library to integrate with it.
Author: Andrii Grynenko (andriigrynenko)
Reviewed in: https://reviews.llvm.org/D24628
llvm-svn: 282582
This is a follow up to r282152.
A more extensive testing on real apps revealed a subtle bug in r282152.
The revision made shadow mapping non-linear even within a single
user region. But there are lots of code in runtime that processes
memory ranges and assumes that mapping is linear. For example,
region memory access handling simply increments shadow address
to advance to the next shadow cell group. Similarly, DontNeedShadowFor,
java memory mover, search of heap memory block header, etc
make similar assumptions.
To trigger the bug user range would need to cross 0x008000000000 boundary.
This was observed for a module data section.
Make shadow mapping linear within a single user range again.
Add a startup CHECK for linearity.
llvm-svn: 282405
Don't xor user address with kAppMemXor in meta mapping.
The only purpose of kAppMemXor is to raise shadow for ~0 user addresses,
so that they don't map to ~0 (which would cause overlap between
user memory and shadow).
For meta mapping we explicitly add kMetaShadowBeg offset,
so we don't need to additionally raise meta shadow.
llvm-svn: 282403
It's wrong to pass to MsanReallocate a pointer that MSan allocator doesn't own.
Use nullptr instead of ptr to prevent possible (still unlikely) failure.
llvm-svn: 282390
This reverts commit r282294. It breaks a Linux bot:
http://lab.llvm.org:8011/builders/clang-cmake-aarch64-42vma/builds/12180
It looks like the test checks that __llvm_profile_set_filename() alters the raw
profile filename in both the dylib and the main program. Now that
lprofCurFilename is hidden, this can't work, and we get two profiles (one for
the call to "main" and one for "func").
Back this change out so that we don't affect external users.
llvm-svn: 282304
Profile-aarch64 :: Linux/comdat_rename.test
Profile-aarch64 :: Linux/extern_template.test
Profile-aarch64 :: Linux/instrprof-comdat.test
Profile-aarch64 :: Linux/instrprof-cs.c
The issue is that the created (aarch64) binaries were attempting to run natively
instead of running through %run, which guarantees running in the proper
environment if the compilation was configured correctly.
llvm-svn: 282264
Summary:
The 'asan_preload_test-1.cc' is not working with the i686 architecture.
To repro the error, run on a linux 64-bit:
```
ninja check-asan-dynamic
```
The following error occurs:
```
--
Exit Code: 1
Command Output (stderr):
--
/home/llvm/llvm/projects/compiler-rt/test/asan/TestCases/Linux/asan_preload_test-1.cc:18:12: error: expected string not found in input
// CHECK: AddressSanitizer: heap-buffer-overflow
^
<stdin>:1:1: note: scanning from here
ERROR: ld.so: object 'libclang_rt.asan-i686.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
^
<stdin>:2:10: note: possible intended match here
==25982==AddressSanitizer CHECK failed: /home/llvm/llvm/projects/compiler-rt/lib/asan/asan_interceptors.cc:736 "((__interception::real_memcpy)) != (0)" (0x0, 0x0)
```
The unittest is running (where %shared_libasan is replaced by libclang_rt.asan-i686.so):
```
// RUN: env LD_PRELOAD=%shared_libasan not %run %t 2>&1 | FileCheck %s
```
But the executable also has a dependancy on libclang_rt.asan-i386.so (added by the clang driver):
```
linux-gate.so.1 => (0xf77cc000)
libclang_rt.asan-i386.so => not found
libstdc++.so.6 => /usr/lib/i386-linux-gnu/libstdc++.so.6 (0xf76ba000)
libm.so.6 => /lib/i386-linux-gnu/libm.so.6 (0xf7673000)
libgcc_s.so.1 => /lib/i386-linux-gnu/libgcc_s.so.1 (0xf7656000)
libc.so.6 => /lib/i386-linux-gnu/libc.so.6 (0xf74a7000)
```
By looking to the clang driver (tools.cpp) we can see that every x86 architecture are mapped to 'i386'.
```
StringRef MyArch;
switch (getToolChain().getArch()) {
case llvm::Triple::arm:
MyArch = "arm";
break;
case llvm::Triple::x86:
MyArch = "i386";
break;
case llvm::Triple::x86_64:
MyArch = "amd64";
break;
default:
llvm_unreachable("Unsupported architecture");
}
```
This patch is implementing the same mapping but in the compiler-rt unittest.
Reviewers: rnk, vitalybuka
Subscribers: aemerson, kubabrecka, dberris, llvm-commits, chrisha
Differential Revision: https://reviews.llvm.org/D24838
llvm-svn: 282263
On Darwin, -lm, -pthread and others are implied. -pthread currently produces a warning (compiler option unused).
Differential Revision: https://reviews.llvm.org/D24698
llvm-svn: 282260
Summary:
Window compiler is stricter for attributes location. This patch fixes a compilation error.
```
D:\src\llvm\llvm\projects\compiler-rt\lib\lsan\lsan_thread.cc(39): error C2144: syntax error: 'int' should be preceded by ';'
```
Reviewers: rnk, majnemer
Subscribers: majnemer, llvm-commits, chrisha, dberris
Differential Revision: https://reviews.llvm.org/D24810
llvm-svn: 282254
In ShadowToMem we call MemToShadow potentially for incorrect addresses.
So DCHECK(IsAppMem(p)) can fire in debug mode.
Fix this by swapping range and MemToShadow checks.
llvm-svn: 282157
4.1+ Linux kernels map pie binaries at 0x55:
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=d1fd836dcf00d2028c700c7e44d2c23404062c90
Currently tsan does not support app memory at 0x55 (https://github.com/google/sanitizers/issues/503).
Older kernels also map pie binaries at 0x55 when ASLR is disables (most notably under gdb).
This change extends tsan mapping for linux/x86_64 to cover 0x554-0x568 app range and fixes both 4.1+ kernels and gdb.
This required to slightly shrink low and high app ranges and move heap. The mapping become even more non-linear, since now we xor lower bits. Now even a continuous app range maps to split, intermixed shadow ranges. This breaks ShadowToMemImpl as it assumes linear mapping at least within a continuous app range (however it turned out to be already broken at least on arm64/42-bit vma as uncovered by r281970). So also change ShadowToMemImpl to hopefully a more robust implementation that does not assume a linear mapping.
llvm-svn: 282152
For mips assember '#' is the start of comment. We get assembler error messages if # is used in the struct names. Therefore using '$' which works for all architectures.
Differential: D24335
Reviewed by: zhaoqin
llvm-svn: 282142
Summary:
Finish work on PR30351 (last one, after D24551, D24552, and D24554 land)
Also replace the old ReportData structure/variable with the current_error_ static
member of the ScopedInErrorReport class.
This has the following side-effects:
- Move ASAN_ON_ERROR(); call to the start of the destructor, instead
of in StartReporting().
- We only generate the error structure after the
ScopedInErrorReport constructor finishes, so we can't call
ASAN_ON_ERROR() during the constructor. I think this makes more
sense, since we end up never running two of the ASAN_ON_ERROR()
callback. This also works the same way as error reporting, since
we end up having a lock around it. Otherwise we could end up
with the ASAN_ON_ERROR() call for error 1, then the
ASAN_ON_ERROR() call for error 2, and then lock the mutex for
reporting error 1.
- The __asan_get_report_* functions will be able to, in the future,
provide information about other errors that aren't a "generic
error". But we might want to rethink that API, since it's too
restricted. Ideally we teach lldb about the current_error_ member of
ScopedInErrorReport.
Reviewers: vitalybuka, kcc, eugenis
Subscribers: kubabrecka, llvm-commits
Differential Revision: https://reviews.llvm.org/D24555
llvm-svn: 282107
Summary:
The dynamic shadow code is not detected correctly on Android.
The android shadow seems to start at address zero.
The bug is introduced here:
https://reviews.llvm.org/D23363
Started here: https://build.chromium.org/p/chromium.fyi/builders/ClangToTAndroidASan/builds/4029
Likely due to an asan runtime change, filed https://llvm.org/bugs/show_bug.cgi?id=30462
From asan_mapping.h:
```
#if SANITIZER_WORDSIZE == 32
# if SANITIZER_ANDROID
# define SHADOW_OFFSET (0) <<---- HERE
# elif defined(__mips__)
```
Shadow address on android is 0.
From asan_rtl.c:
```
if (shadow_start == 0) {
[...]
shadow_start = FindAvailableMemoryRange(space_size, alignment, granularity);
}
```
We assumed that 0 is dynamic address.
On windows, the address was determined with:
```
# elif SANITIZER_WINDOWS64
# define SHADOW_OFFSET __asan_shadow_memory_dynamic_address
# else
```
and __asan_shadow_memory_dynamic_address is initially zero.
Reviewers: rnk, eugenis, vitalybuka
Subscribers: kcc, tberghammer, danalbert, kubabrecka, dberris, llvm-commits, chrisha
Differential Revision: https://reviews.llvm.org/D24768
llvm-svn: 282085
One of the tests relying on sem_t's layout gets the wrong value for versions of
glibc newer than 2.21 on platforms that don't have 64-bit atomics (e.g. ARM).
This commit fixes the test to work with:
* versions of glibc >= 2.21 on platforms with 64-bit atomics: unchanged
* versions of glibc >= 2.21 on platforms without 64-bit atomics: the semaphore
value is shifted by SEM_VALUE_SHIFT (which is set to 1 in glibc's internal
headers)
* versions of glibc < 2.21: unchanged
See the glibc 2.23 sources:
* sysdeps/nptl/internaltypes.h (struct new_sem for glibc >= 2.21 and
struct old_sem for glibc < 2.21)
* nptl/sem_getvalue.c
This was uncovered on one of the new buildbots that we are trying to move to
production.
Differential Revision: https://reviews.llvm.org/D24766
llvm-svn: 282061
This was changed in rL276151 and causes problems if the C++ compiler does not
support the same arches as the C compiler.
For the builtins, only the C compiler is tested in try_compile_only.
Additionally, -fno-exceptions is passed in (if available) to work around
the case where no libunwind is available.
Differential Revision: https://reviews.llvm.org/D23654
llvm-svn: 282054
Summary:
GetActuallyAllocatedSize() was not accounting for the last page of the mapping
being a guard page, and was returning the wrong number of actually allocated
bytes, which in turn would mess up with the realloc logic. Current tests didn't
find this as the size exercised was only serviced by the Primary.
Correct the issue by subtracting PageSize, and update the realloc test to
exercise paths in both the Primary and the Secondary.
Reviewers: kcc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D24787
llvm-svn: 282030
Summary:
Much of the non-Darwin build system assumes that COMPILER_RT_DEFAULT_TARGET_TRIPLE is the default target triple for the compiler being used. With clang as your compiler this isn't necessarily true.
To ensure that the rest of the build system behaves as expected this patch adds "--target=${COMPILER_RT_DEFAULT_TARGET_TRIPLE}" to the compiler flags for C, CXX and ASM sources.
Reviewers: compnerd, rengolin, fjricci
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D24156
llvm-svn: 282024
Summary:
The Sanitizer Secondary Allocator was not entirely ideal was Scudo for several
reasons: decent amount of unneeded code, redundant checks already performed by
the front end, unneeded data structures, difficulty to properly protect the
secondary chunks header.
Given that the second allocator is pretty straight forward, Scudo will use its
own, trimming all the unneeded code off of the Sanitizer one. A significant
difference in terms of security is that now each secondary chunk is preceded
and followed by a guard page, thus mitigating overflows into and from the
chunk.
A test was added as well to illustrate the overflow & underflow situations
into the guard pages.
Reviewers: kcc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D24737
llvm-svn: 281938
Summary:
This patch is adding the needed code to compiler-rt to support
dynamic shadow.
This is to support this patch:
https://reviews.llvm.org/D23354
It's adding support for using a shadow placed at a dynamic address determined
at runtime.
The dynamic shadow is required to work on windows 64-bits.
Reviewers: rnk, kcc, vitalybuka
Subscribers: kubabrecka, dberris, llvm-commits, chrisha
Differential Revision: https://reviews.llvm.org/D23363
llvm-svn: 281909
Currently, when doing a ASanified build of LLVM (with Clang, compiler-rt and libcxx) via -DLLVM_USE_SANITIZER=Address and not using any other options, we already disable building of sanitizer runtimes (because they themselves can’t be sanitized) and also exclude the sanitizer tests. However, the same is not done for the profiling runtime, which will build fine, but then all the tests fail due to linking errors. Let’s disable the profiling runtime as well (when LLVM_USE_SANITIZER is set).
Differential Revision: https://reviews.llvm.org/D24657
llvm-svn: 281815
Summary:
This value is already defaulted to true in asan_internal.h.
Allow the value to be overriden in cases where exceptions are unavailable.
Reviewers: kcc, samsonov, compnerd
Subscribers: kubabrecka, dberris, beanz, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D24633
llvm-svn: 281746
Summary:
I need to redu solution, existing is not good enough.
PR28267
Reviewers: eugenis
Subscribers: llvm-commits, kubabrecka
Differential Revision: https://reviews.llvm.org/D24490
llvm-svn: 281687
The definitions in sanitizer_common may conflict with definitions from system headers because:
The runtime includes the system headers after the project headers (as per LLVM coding guidelines).
lib/sanitizer_common/sanitizer_internal_defs.h pollutes the namespace of everything defined after it, which is all/most of the sanitizer .h and .cc files and the included system headers with: using namespace __sanitizer; // NOLINT
This patch solves the problem by introducing the namespace only within the sanitizer namespaces as proposed by Dmitry.
Differential Revision: https://reviews.llvm.org/D21947
llvm-svn: 281657
These got out of sync and the tests were failing for me locally. We
assume a 47 bit address space in ASan, so we should do the same in the
tests.
llvm-svn: 281622
Don't list __sanitizer_print_memory profile as an INTERFACE_FUNCTION. It
is not exported by ASan; it is exported by user code.
Move the weak definition from asan_win.cc to sanitizer_win.cc to fix the
ubsan tests.
llvm-svn: 281619
Summary:
ASAN on Windows 64-bits should use a dynamic address instead of a fixed one.
The asan-allocator code to support dynamic address is already landed.
This patch is turning on the feature.
Reviewers: rnk
Subscribers: kubabrecka, dberris, llvm-commits, chrisha
Differential Revision: https://reviews.llvm.org/D24575
llvm-svn: 281522
The '-asan-use-private-alias’ option (disabled by default) option is currently only enabled for Linux and ELF, but it also works on Darwin and Mach-O. This option also fixes a known problem with LTO on Darwin (https://github.com/google/sanitizers/issues/647). This patch enables the support for Darwin (but still keeps it off by default) and adds the LTO test case.
Differential Revision: https://reviews.llvm.org/D24292
llvm-svn: 281472
Support overriding LLVM_* variables obtained from llvm-config when doing
stand-alone builds. The override of LLVM_MAIN_SRC_DIR is necessary to
provide LLVM sources when the initial directory used to build LLVM does
no longer exist when compiler-rt is built stand-alone. This is
especially the case when building the projects separately in temporary
directories with unpredictable names.
The code is based on existing CMakeLists.txt from clang. Alike clang, it
extends the override to all queried variables.
Differential Revision: https://reviews.llvm.org/D24005
llvm-svn: 281461
It makes the tests extremely slow due to high latency of the test launcher.
The main reason for -j5 was high memory usage with handle_abort=1, which
is now disabled in the test runner.
llvm-svn: 281409
When running with start_deactivated=1 in ASAN_OPTIONS, heap redzones
are not poisoned until the first instrumented module is loaded. This
can cause false negatives even on memory allocated after activation,
because redzones are normally poisoned only once when a new allocator
region is mapped.
This change attempts to fix it by iterating over all existing
allocator chunks and poisoning their redzones.
llvm-svn: 281364
Summary:
Added a macro to enumerate the (error name, error member name) pairs. This way,
when adding an error, we only need to add the pair to one place (plus add its
implementation, or course).
Reviewers: kcc, samsonov
Subscribers: llvm-commits, kubabrecka
Differential Revision: https://reviews.llvm.org/D23875
llvm-svn: 281237
Summary: As mentioned in D24394, I'm moving tid to ErrorBase, since basically all errors need it.
Also mentioned in the same review are other cleanups like adding const
to BufferedStackTrace and make sure constructor orders are consistent.
Reviewers: vitalybuka, kcc, eugenis
Subscribers: llvm-commits, kubabrecka
Differential Revision: https://reviews.llvm.org/D24455
llvm-svn: 281236
Summary:
This is important information when we want to describe errors, and should be
part of these descriptions. Otherwise, we need to know the access size when
printing/emitting the description.
Reviewers: kcc, eugenis, vitalybuka
Subscribers: llvm-commits, kubabrecka
Differential Revision: https://reviews.llvm.org/D24387
llvm-svn: 281093
Summary:
This is useful for inclusion in the Error* structures, to describe an
arbitrary address.
Remove the old struct since it's used only once. This removes one level of
indirection, and moves all *AddressDescription to be one of the recently
introduced structures.
This merges differential revisions: D24131 and D24132
Reviewers: kcc, eugenis, vitalybuka
Subscribers: kubabrecka, llvm-commits
Differential Revision: https://reviews.llvm.org/D24131
llvm-svn: 281090
The same thing is already done on Mac. handle_abort slows down tests
significantly because it triggers tombstone collection on Android;
also, it changes failed test outcome from "not-crash" to "crash" (as
in "bin/not --crash").
This change adds handle_abort=0 to asan options on android (test
only!), and also tweaks android_run.py to semi-correctly pass the
crash/no-crash status to the caller.
llvm-svn: 281075
Summary: Merges back both scariness_score_test.cc files, since the Linux-specific version shouldn't be needed any more.
Reviewers: kcc, eugenis, vitalybuka
Subscribers: llvm-commits, kubabrecka
Differential Revision: https://reviews.llvm.org/D24347
llvm-svn: 281048
Marcin Koscielnicki