Loop peeling also has an impact on the induction variables, so we should
benefit from induction variable simplification after peeling too.
Reviewers: sanjoy, bogner, mzolotukhin, efriedma
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D43878
llvm-svn: 328301
Transforms/Scalar/SCCP.cpp implemented both the Scalar and IPO SCCP, but
this meant Transforms/Scalar including Transfroms/IPO headers, creating
a circular dependency. (IPO depends on Scalar already) - so move the IPO
SCCP shims out into IPO and the basic library implementation accessible
from Scalar/SCCP.h to be used from the IPO/SCCP.cpp implementation.
llvm-svn: 328250
Summary:
When building with libFuzzer, converting control flow to selects or
obscuring the original operands of CMPs reduces the effectiveness of
libFuzzer's heuristics.
This patch provides an attribute to disable or modify certain optimizations
for optimal fuzzing signal.
Provides a less aggressive alternative to https://reviews.llvm.org/D44057.
Reviewers: vitalybuka, davide, arsenm, hfinkel
Reviewed By: vitalybuka
Subscribers: junbuml, mehdi_amini, wdng, javed.absar, hiraditya, llvm-commits, kcc
Differential Revision: https://reviews.llvm.org/D44232
llvm-svn: 328214
Summary:
LoopPredication is not profitable when the loop is known to always exit
through some block other than the latch block.
A coarse grained latch check can cause loop predication to predicate the
loop, and unconditionally deoptimize.
However, without predicating the loop, the guard may never fail within the
loop during the dynamic execution because the non-latch loop termination
condition exits the loop before the latch condition causes the loop to
exit.
We teach LP about this using BranchProfileInfo pass.
Reviewers: apilipenko, skatkov, mkazantsev, reames
Reviewed by: skatkov
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D44667
llvm-svn: 328210
The dominator tree analysis can be preserved easily.
Some other kinds of analysis can probably be preserved
too.
Reviewers: junbuml, dberlin
Reviewed By: dberlin
Differential Revision: https://reviews.llvm.org/D43173
llvm-svn: 328206
DuplicateInstructionsInSplitBetween can preserve the DT by passing
through DT to SplitEdge.
Reviewers: sanjoy, junbuml, anna, kuhar
Reviewed By: kuhar
Differential Revision: https://reviews.llvm.org/D44629
llvm-svn: 328189
Remove #include of Transforms/Scalar.h from Transform/Utils to fix layering.
Transforms depends on Transforms/Utils, not the other way around. So
remove the header and the "createStripGCRelocatesPass" function
declaration (& definition) that is unused and motivated this dependency.
Move Transforms/Utils/Local.h into Analysis because it's used by
Analysis/MemoryBuiltins.cpp.
llvm-svn: 328165
Summary:
This change is part of step five in the series of changes to remove alignment argument from
memcpy/memmove/memset in favour of alignment attributes. In particular, this changes the
MemCpyOpt pass to cease using:
1) The old getAlignment() API of MemoryIntrinsic in favour of getting source & dest specific
alignments through the new API.
2) The old IRBuilder CreateMemCpy/CreateMemMove single-alignment APIs in favour of the new
API that allows setting source and destination alignments independently.
We also add a few tests to fill gaps in the testing of this pass.
Steps:
Step 1) Remove alignment parameter and create alignment parameter attributes for
memcpy/memmove/memset. ( rL322965, rC322964, rL322963 )
Step 2) Expand the IRBuilder API to allow creation of memcpy/memmove with differing
source and dest alignments. ( rL323597 )
Step 3) Update Clang to use the new IRBuilder API. ( rC323617 )
Step 4) Update Polly to use the new IRBuilder API. ( rL323618 )
Step 5) Update LLVM passes that create memcpy/memmove calls to use the new IRBuilder API,
and those that use use MemIntrinsicInst::[get|set]Alignment() to use [get|set]DestAlignment()
and [get|set]SourceAlignment() instead. ( rL323886, rL323891, rL324148, rL324273, rL324278,
rL324384, rL324395, rL324402, rL324626, rL324642, rL324653, rL324654, rL324773, rL324774,
rL324781, rL324784, rL324955, rL324960, rL325816, rL327398, rL327421 )
Step 6) Remove the single-alignment IRBuilder API for memcpy/memmove, and the
MemIntrinsicInst::[get|set]Alignment() methods.
Reference
http://lists.llvm.org/pipermail/llvm-dev/2015-August/089384.htmlhttp://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151109/312083.html
llvm-svn: 328097
Summary:
If the operands of a udiv/urem can be proved to fit within a smaller
power-of-two-sized type, reduce the width of the udiv/urem.
Backed out for causing performance regressions. Re-landing
because we've determined that these regressions were noise.
Original Differential Revision: https://reviews.llvm.org/D44102
llvm-svn: 328096
The inline assembly generated for the ARC autorelease elision marker
must have a funclet token if it's emitted inside a funclet, otherwise
the inline assembly (and all subsequent code in the funclet) will be
marked unreachable by WinEHPrepare.
Note that this only applies for the non-O0 case, since at O0, clang
emits the autorelease elision marker itself rather than deferring to the
backend. The fix for clang is handled in a separate change.
Differential Revision: https://reviews.llvm.org/D44641
llvm-svn: 328042
Summary: Fix a bug in entry block shuffled to middle of the chain.
Reviewers: davide, courbet
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D44642
llvm-svn: 327971
Summary:
It turned out to be error-prone to expect the callers to handle that - better to
leave the decision to this routine and make the required data to be explicitly
passed to the function.
This handles the case that was missed in the r322473 and fixes the assert
mentioned in PR36524.
Reviewers: dorit, mssimpso, Ayal, dcaballe
Reviewed By: dcaballe
Subscribers: Ka-Ka, hiraditya, dneilson, hsaito, llvm-commits
Differential Revision: https://reviews.llvm.org/D43812
llvm-svn: 327960
This is complicated by -0.0 and nan. This is based on the DAG patterns
as shown in D44091. I'm hoping that we can just remove those DAG folds
and always rely on IR canonicalization to handle the matching to fabs.
We would still need to delete the broken code from DAGCombiner to fix
PR36600:
https://bugs.llvm.org/show_bug.cgi?id=36600
Differential Revision: https://reviews.llvm.org/D44550
llvm-svn: 327858
Despite their names, RegSaveAreaPtrPtr and OverflowArgAreaPtrPtr
used to be i8* instead of i8**.
This is important, because these pointers are dereferenced twice
(first in CreateLoad(), then in getShadowOriginPtr()), but for some
reason MSan allowed this - most certainly because it was possible
to optimize getShadowOriginPtr() away at compile time.
Differential revision: https://reviews.llvm.org/D44520
llvm-svn: 327830
For MSan instrumentation with MS.ParamTLS and MS.ParamOriginTLS being
TLS variables, the CreateAdd() with ArgOffset==0 is a no-op, because
the compiler is able to fold the addition of 0.
But for KMSAN, which receives ParamTLS and ParamOriginTLS from a call
to the runtime library, this introduces a stray instruction which
complicates reading/testing the IR.
Differential revision: https://reviews.llvm.org/D44514
llvm-svn: 327829
This is a step towards the upcoming KMSAN implementation patch.
KMSAN is going to use a different warning function,
__msan_warning_32(uptr origin), so we'd better create the warning
calls in one place.
Differential Revision: https://reviews.llvm.org/D44513
llvm-svn: 327828
LICM deletes trivially dead instructions which it won't attempt to sink.
Attempt to salvage debug values which reference these instructions.
llvm-svn: 327800
X86 Supports Indirect Branch Tracking (IBT) as part of Control-Flow Enforcement Technology (CET).
IBT instruments ENDBR instructions used to specify valid targets of indirect call / jmp.
The `nocf_check` attribute has two roles in the context of X86 IBT technology:
1. Appertains to a function - do not add ENDBR instruction at the beginning of the function.
2. Appertains to a function pointer - do not track the target function of this pointer by adding nocf_check prefix to the indirect-call instruction.
This patch implements `nocf_check` context for Indirect Branch Tracking.
It also auto generates `nocf_check` prefixes before indirect branchs to jump tables that are guarded by range checks.
Differential Revision: https://reviews.llvm.org/D41879
llvm-svn: 327767
This builds on the work from https://reviews.llvm.org/D44287. It turned out supporting fcmp was much easier than I realized, so let's do that now.
As an aside, our -O3 handling of a floating point IVs leaves a lot to be desired. We do convert the float IV to an integer IV, but do so late enough that many other optimizations are missed (e.g. we don't vectorize).
Differential Revision: https://reviews.llvm.org/D44542
llvm-svn: 327722
JumpThreading iterates over F until the IR quiesces. Transforming
unreachable BBs increases compile time and it is also possible to
never stabilize causing JumpThreading to hang. An older attempt at
fixing this problem was D3991 where removeUnreachableBlocks(F)
was called before JumpThreading began. This has a few drawbacks:
* expensive - the routine attempts to fix up the IR to identify
additional BBs that can be removed along with unreachable BBs.
* aggressive - does not identify and preserve the shape of the IR.
At a minimum it does not preserve loop hierarchies.
* invasive - altering reachable blocks it may disrupt IR shapes
that could have otherwise been JumpThreaded.
This patch avoids removeUnreachableBlocks(F) and instead tracks
unreachable BBs in a SmallPtrSet using DominatorTree to validate the
initial state of all BBs. We then rely on subsequent passes to identify
and remove these unreachable blocks from F.
Reviewers: dberlin, sebpop, kuhar, dinesh.d
Reviewed by: sebpop, kuhar
Subscribers: hiraditya, uabelho, llvm-commits
Differential Revision: https://reviews.llvm.org/D44177
llvm-svn: 327713
If the loop body contains conditions of the form IndVar < #constant, we
can remove the checks by peeling off #constant iterations.
This improves codegen for PR34364.
Reviewers: mkuper, mkazantsev, efriedma
Reviewed By: mkazantsev
Differential Revision: https://reviews.llvm.org/D43876
llvm-svn: 327671
It is common to have conditional exits within a loop which are known not to be taken on some iterations, but not necessarily all. This patches extends our reasoning around guaranteed to execute (used when establishing whether it's safe to dereference a location from the preheader) to handle the case where an exit is known not to be taken on the first iteration and the instruction of interest *is* known to be taken on the first iteration.
This case comes up in two major ways:
* If we have a range check which we've been unable to eliminate, we frequently know that it doesn't fail on the first iteration.
* Pass ordering. We may have a check which will be eliminated through some sequence of other passes, but depending on the exact pass sequence we might never actually do so or we might miss other optimizations from passes run before the check is finally eliminated.
The initial version (here) is implemented via InstSimplify. At the moment, it catches a few cases, but misses a lot too. I added test cases for missing cases in InstSimplify which I'll follow up on separately. Longer term, we should probably wire SCEV through to here to get much smarter loop aware simplification of the first iteration predicate.
Differential Revision: https://reviews.llvm.org/D44287
llvm-svn: 327664
If we've already established an invariant scope with an earlier generation, we don't want to hide it in the scoped hash table with one with a later generation. I noticed this when working on the invariant-load handling, but it also applies to the invariant.start case as well.
Without this change, my previous patch for invariant-load regresses some cases, so I'm pushing this without waiting for review. This is why you don't make last minute tweaks to patches to catch "obvious cases" after it's already been reviewed. Bad Philip!
llvm-svn: 327655
This is a follow up to https://reviews.llvm.org/D43716 which rewrites the invariant load handling using the new infrastructure. It's slightly more powerful, but only in somewhat minor ways for the moment. It's not clear that DSE of stores to invariant locations is actually interesting since why would your IR have such a construct to start with?
Note: The submitted version is slightly different than the reviewed one. I realized the scope could start for an invariant load which was proven redundant and removed. Added a test case to illustrate that as well.
Differential Revision: https://reviews.llvm.org/D44497
llvm-svn: 327646
When hoisting common code from the "then" and "else" branches of a condition
to before the "if", the HoistThenElseCodeToIf routine will attempt to merge
the debug location associated with the two original copies of the hoisted
instruction.
This is a problem in the special case where the hoisted instruction is a
debug info intrinsic, since for those the debug location is considered
part of the intrinsic and attempting to modify it may resut in invalid
IR. This is the underlying cause of PR36410.
This patch fixes the problem by handling debug info intrinsics specially:
instead of hoisting one copy and merging the two locations, the code now
simply hoists both copies, each with its original location intact. Note
that this is still only done in the case where both original copies are
otherwise (i.e. apart from location metadata) identical.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D44312
llvm-svn: 327622
There are two nontrivial details here:
* Loop structure update interface is quite different with new pass manager,
so the code to add new loops was factored out
* BranchProbabilityInfo is not a loop analysis, so it can not be just getResult'ed from
within the loop pass. It cant even be queried through getCachedResult as LoopCanonicalization
sequence (e.g. LoopSimplify) might invalidate BPI results.
Complete solution for BPI will likely take some time to discuss and figure out,
so for now this was partially solved by making BPI optional in IRCE
(skipping a couple of profitability checks if it is absent).
Most of the IRCE tests got their corresponding new-pass-manager variant enabled.
Only two of them depend on BPI, both marked with TODO, to be turned on when BPI
starts being available for loop passes.
Reviewers: chandlerc, mkazantsev, sanjoy, asbirlea
Reviewed By: mkazantsev
Differential Revision: https://reviews.llvm.org/D43795
llvm-svn: 327619
Summary:
Before this patch call graph is like this in the LoopUnrollPass:
tryToUnrollLoop
ApproximateLoopSize
collectEphemeralValues
/* Use collected ephemeral values */
computeUnrollCount
analyzeLoopUnrollCost
/* Bail out from the analysis if loop contains CallInst */
This patch moves collection of the ephemeral values to the tryToUnrollLoop
function and passes the collected values into both ApproximateLoopsize (as
before) and additionally starts using them in analyzeLoopUnrollCost:
tryToUnrollLoop
collectEphemeralValues
ApproximateLoopSize(EphValues)
/* Use EphValues */
computeUnrollCount(EphValues)
analyzeLoopUnrollCost(EphValues)
/* Ignore ephemeral values - they don't contribute to the final cost */
/* Bail out from the analysis if loop contains CallInst */
Reviewers: mzolotukhin, evstupac, sanjoy
Reviewed By: evstupac
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D43931
llvm-svn: 327617
Summary:
This variable is largely going unused; aside from reporting number of instructions for in DEBUG builds.
The only use of NumInstructions is in debug output to represent the LoopSize. That value can be can be misleading as it also includes metadata instructions (e.g., DBG_VALUE) which have no real impact. If we do choose to keep this around, we probably should guard it by a DEBUG macro, as it's not used in production builds.
Reviewers: majnemer, congh, rengolin
Reviewed By: rengolin
Subscribers: llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D44495
llvm-svn: 327589
If we have an invariant.start with no corresponding invariant.end, then the memory location becomes invariant indefinitely after the invariant.start. As a result, anything dominated by the start is guaranteed to see the value the memory location had when the invariant.start executed.
This patch adds an AvailableInvariants table which tracks the generation a particular memory location became invariant and then uses that information to allow value forwarding that would otherwise be disallowed by potentially aliasing stores. (Reminder: In EarlyCSE everything clobbers everything by default.)
This should be compatible with the MemorySSA variant, but design is generational. We can and should add first class support for invariant.start within MemorySSA at a later time. I took a quick look at doing so, but probably need some input from a MemorySSA expert.
Differential Revision: https://reviews.llvm.org/D43716
llvm-svn: 327577
This is PR36686.
If a user of a library is LTOed with that library we take the
opportunity to set dso_local, but we don't clear dllimport, which
creates an invalid IR.
llvm-svn: 327408
This was supposed to be an NFC refactoring that will eventually allow
eliminating the isFast() predicate, but there's a rare possibility
that we would pessimize the code as shown in the test case because
we failed to check 'hasOneUse()' properly. This version also removes
an inefficiency of the old code; we would look for:
(X * C) * C1 --> X * (C * C1)
...but that pattern is always handled by
SimplifyAssociativeOrCommutative().
llvm-svn: 327404
Summary:
This change is part of step five in the series of changes to remove alignment argument from
memcpy/memmove/memset in favour of alignment attributes. In particular, this changes the
SROA pass to cease using the old getAlignment() & setAlignment() APIs of MemoryIntrinsic in
favour of getting source & dest specific alignments through the new API. This allows us
to enhance visitMemTransferInst to be more aggressive setting the alignment in memcpy
calls that it creates, as well as to only change the alignment of a memcpy/memmove
argument that it replaces.
Steps:
Step 1) Remove alignment parameter and create alignment parameter attributes for
memcpy/memmove/memset. ( rL322965, rC322964, rL322963 )
Step 2) Expand the IRBuilder API to allow creation of memcpy/memmove with differing
source and dest alignments. ( rL323597 )
Step 3) Update Clang to use the new IRBuilder API. ( rC323617 )
Step 4) Update Polly to use the new IRBuilder API. ( rL323618 )
Step 5) Update LLVM passes that create memcpy/memmove calls to use the new IRBuilder API,
and those that use use MemIntrinsicInst::[get|set]Alignment() to use [get|set]DestAlignment()
and [get|set]SourceAlignment() instead. ( rL323886, rL323891, rL324148, rL324273, rL324278,
rL324384, rL324395, rL324402, rL324626, rL324642, rL324653, rL324654, rL324773, rL324774,
rL324781, rL324784, rL324955, rL324960, rL325816 )
Step 6) Remove the single-alignment IRBuilder API for memcpy/memmove, and the
MemIntrinsicInst::[get|set]Alignment() methods.
Reference
http://lists.llvm.org/pipermail/llvm-dev/2015-August/089384.htmlhttp://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151109/312083.html
Reviewers: chandlerc, bollu, efriedma
Reviewed By: efriedma
Subscribers: efriedma, eraman, llvm-commits
Differential Revision: https://reviews.llvm.org/D42974
llvm-svn: 327398
Florian Hahn