Summary: As per title. Also add a facility method to get the name of a basic block from the C API.
Reviewers: bogner, chandlerc, echristo, dblaikie, joker.eph, Wallbraker
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D16912
llvm-svn: 260309
Summary: This diff increase the tested surface of the C API.
Reviewers: bogner, chandlerc, echristo, dblaikie, joker.eph, Wallbraker
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D16910
llvm-svn: 259863
Summary:
This basically add an echo test case in C. The support is limited right now, but full support would just be too much to review at once.
The echo test case simply get a module as input and try to output the same exact module. This allow to check the both reading and writing API are working as expected.
I want to improve this test over time to support more and more of the API, in order to improve coverage (coverage is quite poor right now).
Test Plan: Run the test.
Reviewers: chandlerc, bogner
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10725
llvm-svn: 259844
This deprecates:
* LLVMParseBitcode
* LLVMParseBitcodeInContext
* LLVMGetBitcodeModuleInContext
* LLVMGetBitcodeModule
They are replaced with the functions with a 2 suffix which do not record
a diagnostic.
llvm-svn: 256065
Summary:
This patch introduces two new function attributes
InaccessibleMemOnly: This attribute indicates that the function may only access memory that is not accessible by the program/IR being compiled. This is a weaker form of ReadNone.
inaccessibleMemOrArgMemOnly: This attribute indicates that the function may only access memory that is either not accessible by the program/IR being compiled, or is pointed to by its pointer arguments. This is a weaker form of ArgMemOnly
Test cases have been updated. This revision uses this (d001932f3a) as reference.
Reviewers: jmolloy, hfinkel
Subscribers: reames, joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D15499
llvm-svn: 255778
This attribute allows the compiler to assume that the function never recurses into itself, either directly or indirectly (transitively). This can be used among other things to demote global variables to locals.
llvm-svn: 252282
CMake.
The Go bindings tests in an unoptimized build take over 30 seconds for
me, making it the slowest test in 'check-llvm' by a factor of two.
I've only rigged this up fully to the CMake build. If someone is
interested in rigging it up to the autoconf build, they're welcome to do
so.
llvm-svn: 247243
This -warn-error flag invariably gets into release tarballs
and breaks builds on distributions that run tests as a part
of release process. The OCaml binding tests are especially
critical, since they often expose lingering toolchain bugs,
and so it is replaced with -w +A (equivalent to -Wall).
llvm-svn: 242550
Dissasembly tests depends on target. The problem is that it disable
all tests if all targets are not compiled. This moves things around in
order to get target specific code in a target specific folder.
Patch by Amaury Sechet. Thanks!
llvm-svn: 240380
Finish off PR23080 by renaming the debug info IR constructs from `MD*`
to `DI*`. The last of the `DIDescriptor` classes were deleted in
r235356, and the last of the related typedefs removed in r235413, so
this has all baked for about a week.
Note: If you have out-of-tree code (like a frontend), I recommend that
you get everything compiling and tests passing with the *previous*
commit before updating to this one. It'll be easier to keep track of
what code is using the `DIDescriptor` hierarchy and what you've already
updated, and I think you're extremely unlikely to insert bugs. YMMV of
course.
Back to *this* commit: I did this using the rename-md-di-nodes.sh
upgrade script I've attached to PR23080 (both code and testcases) and
filtered through clang-format-diff.py. I edited the tests for
test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns
were off-by-three. It should work on your out-of-tree testcases (and
code, if you've followed the advice in the previous paragraph).
Some of the tests are in badly named files now (e.g.,
test/Assembler/invalid-mdcompositetype-missing-tag.ll should be
'dicompositetype'); I'll come back and move the files in a follow-up
commit.
llvm-svn: 236120
Move the specialized metadata nodes for the new debug info hierarchy
into place, finishing off PR22464. I've done bootstraps (and all that)
and I'm confident this commit is NFC as far as DWARF output is
concerned. Let me know if I'm wrong :).
The code changes are fairly mechanical:
- Bumped the "Debug Info Version".
- `DIBuilder` now creates the appropriate subclass of `MDNode`.
- Subclasses of DIDescriptor now expect to hold their "MD"
counterparts (e.g., `DIBasicType` expects `MDBasicType`).
- Deleted a ton of dead code in `AsmWriter.cpp` and `DebugInfo.cpp`
for printing comments.
- Big update to LangRef to describe the nodes in the new hierarchy.
Feel free to make it better.
Testcase changes are enormous. There's an accompanying clang commit on
its way.
If you have out-of-tree debug info testcases, I just broke your build.
- `upgrade-specialized-nodes.sh` is attached to PR22564. I used it to
update all the IR testcases.
- Unfortunately I failed to find way to script the updates to CHECK
lines, so I updated all of these by hand. This was fairly painful,
since the old CHECKs are difficult to reason about. That's one of
the benefits of the new hierarchy.
This work isn't quite finished, BTW. The `DIDescriptor` subclasses are
almost empty wrappers, but not quite: they still have loose casting
checks (see the `RETURN_FROM_RAW()` macro). Once they're completely
gutted, I'll rename the "MD" classes to "DI" and kill the wrappers. I
also expect to make a few schema changes now that it's easier to reason
about everything.
llvm-svn: 231082
Summary:
MetadataAsValue uses a canonical format that strips the MDNode if it
contains only a single constant value. This triggers an assertion when
trying to cast the value to a MDNode.
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D7165
llvm-svn: 227319
This commit moves `MDLocation`, finishing off PR21433. There's an
accompanying clang commit for frontend testcases. I'll attach the
testcase upgrade script I used to PR21433 to help out-of-tree
frontends/backends.
This changes the schema for `DebugLoc` and `DILocation` from:
!{i32 3, i32 7, !7, !8}
to:
!MDLocation(line: 3, column: 7, scope: !7, inlinedAt: !8)
Note that empty fields (line/column: 0 and inlinedAt: null) don't get
printed by the assembly writer.
llvm-svn: 226048
Patch by Ramkumar Ramachandra <artagnon@gmail.com>.
Also remove Llvm_executionengine.get_pointer_to_global, as it
is actually deprecated and didn't appear in a stable release.
llvm-svn: 224801
Now that `Metadata` is typeless, reflect that in the assembly. These
are the matching assembly changes for the metadata/value split in
r223802.
- Only use the `metadata` type when referencing metadata from a call
intrinsic -- i.e., only when it's used as a `Value`.
- Stop pretending that `ValueAsMetadata` is wrapped in an `MDNode`
when referencing it from call intrinsics.
So, assembly like this:
define @foo(i32 %v) {
call void @llvm.foo(metadata !{i32 %v}, metadata !0)
call void @llvm.foo(metadata !{i32 7}, metadata !0)
call void @llvm.foo(metadata !1, metadata !0)
call void @llvm.foo(metadata !3, metadata !0)
call void @llvm.foo(metadata !{metadata !3}, metadata !0)
ret void, !bar !2
}
!0 = metadata !{metadata !2}
!1 = metadata !{i32* @global}
!2 = metadata !{metadata !3}
!3 = metadata !{}
turns into this:
define @foo(i32 %v) {
call void @llvm.foo(metadata i32 %v, metadata !0)
call void @llvm.foo(metadata i32 7, metadata !0)
call void @llvm.foo(metadata i32* @global, metadata !0)
call void @llvm.foo(metadata !3, metadata !0)
call void @llvm.foo(metadata !{!3}, metadata !0)
ret void, !bar !2
}
!0 = !{!2}
!1 = !{i32* @global}
!2 = !{!3}
!3 = !{}
I wrote an upgrade script that handled almost all of the tests in llvm
and many of the tests in cfe (even handling many `CHECK` lines). I've
attached it (or will attach it in a moment if you're speedy) to PR21532
to help everyone update their out-of-tree testcases.
This is part of PR21532.
llvm-svn: 224257
ocamlc and ocamlopt expose a distinct set of buildsystem bugs, e.g.
only ocamlc would detect -custom or -dllib-related bugs, and as all
buildbots will have ocamlopt, these bugs will stay hidden.
This change should add no more than 30 seconds of testing time.
llvm-svn: 221137
Since JIT->MCJIT migration, most of the ExecutionEngine interface
became deprecated and/or broken. This especially affected the OCaml
bindings, as runFunction is no longer available, and unlike in C,
it is not possible to coerce a pointer to a function and call it
in OCaml.
In practice, LLVM 3.5 shipped completely unusable
Llvm_executionengine.
The GenericValue interface and runFunction were essentially
a poor man's FFI. As such, this interface was removed and instead
a dependency on ctypes >=0.3 added, which handled platform-specific
aspects of accessing data and calling functions.
The new interface does not expose JIT (which is a shim around MCJIT),
as well as the interpreter (which can't handle a lot of valid IR).
Llvm_executionengine.add_global_mapping is currently unusable
due to PR20656.
llvm-svn: 220957
Prior to this commit, the Llvm_target tests (ab)used
the Llvm_executionengine as a mechanism to initialize at least some
target. This needlessly restricted tests to builds which can emit
code for their host architecture.
llvm-svn: 220901
This commit updates the OCaml bindings and tests to use ocamlfind.
The bindings are migrated in order to use ctypes, which are now
required for MCJIT-backed Llvm_executionengine.
The tests are migrated in order to use OUnit and to verify that
the distributed META.llvm allows to build working executables.
Every OCaml toolchain invocation is now chained through ocamlfind,
which (in theory) allows to cross-compile the OCaml bindings.
The configure script now checks for ctypes (>= 0.2.3) and
OUnit (>= 2). The code depending on these libraries will be added
later. The configure script does not check the package versions
in order to keep changes less invasive.
Additionally, OCaml bindings will now be automatically enabled
if ocamlfind is detected on the system, rather than ocamlc, as it
was before.
llvm-svn: 220899
Previously, tests hardcoded ocamlopt and cmxa, which broke builds on
machines without ocamlopt. Instead, they now fall back to ocamlc.
As a side effect this fixes PR14727, which was caused by a crude hack
that replaced gcc with g++ everywhere in the ocamlopt native compiler
path and passes it back using -cc. Now the tests use the same
technique as META, i.e. -cclib -lstdc++. It might be more fragile
than using g++ explicitly, but it will break when the installed
package will also break, which is good.
llvm-svn: 220828
First, return true on success, as it is the OCaml convention.
Second, also initialize the native assembly printer, which is,
despite the name, required for MCJIT operation.
Since this function did not initialize the assembly printer earlier
and no function to initialize native assembly printer was available
elsewhere, it is safe to break its interface: it means that it
simply could not be used successfully before.
llvm-svn: 220620
This tool lets us build LLVM components within the tree by setting up a
$GOPATH that resembles a tree fetched in the normal way with "go get".
It is intended that components such as the Go frontend will be built in-tree
using this tool.
Differential Revision: http://reviews.llvm.org/D5902
llvm-svn: 220462
the CGO build environment. This lets things like -rpath propagate down
to the C++ code that is built along side the Go bindings when testing
them.
Patch by Peter Collingbourne, and verified that it works by me.
llvm-svn: 220252
This code is based on the existing LLVM Go bindings project hosted at:
https://github.com/go-llvm/llvm
Note that all contributors to the gollvm project have agreed to relicense
their changes under the LLVM license and submit them to the LLVM project.
Differential Revision: http://reviews.llvm.org/D5684
llvm-svn: 219976
This reverts commit r218918, effectively reapplying r218914 after fixing
an Ocaml bindings test and an Asan crash. The root cause of the latter
was a tightened-up check in `DILexicalBlock::Verify()`, so I'll file a
PR to investigate who requires the loose check (and why).
Original commit message follows.
--
This patch addresses the first stage of PR17891 by folding constant
arguments together into a single MDString. Integers are stringified and
a `\0` character is used as a separator.
Part of PR17891.
Note: I've attached my testcases upgrade scripts to the PR. If I've
just broken your out-of-tree testcases, they might help.
llvm-svn: 219010
This patch addresses the first stage of PR17891 by folding constant
arguments together into a single MDString. Integers are stringified and
a `\0` character is used as a separator.
Part of PR17891.
Note: I've attached my testcases upgrade scripts to the PR. If I've
just broken your out-of-tree testcases, they might help.
llvm-svn: 218914
Summary:
Until r216870 LLVMCreateObjectFile returned nullptr in case of an error,
so callers could check if the call was successful. Now, it always
returns an OwningBinary wrapped as an LLVMObjectFileRef, so callers
can't check if the call was successul.
This results in a segfault running e.g.
llvm-c-test --object-list-sections < /dev/null
So the old behaviour should be restored.
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5143
llvm-svn: 217279
While the test would work with any compiled in target with object
emission support, it's nontrivial to formulate this condition in
lit, so a conservative restriction is used instead.
llvm-svn: 194781
This commit brings the module structure, argument order and
primitive names in Llvm_target in order with the rest of the bindings,
in preparation for adding TargetMachine API.
llvm-svn: 194773
Llvm_target.intptr_type used to implicitly use global context. As
none of other functions in OCaml bindings do, it is changed to
accept context explicitly.
llvm-svn: 194381
This provides rudimentary testing of the llvm-c api.
The following commands are implemented:
* --module-dump
Read bytecode from stdin - print ir
* --module-list-functions
Read bytecode from stdin - list summary of functions
* --module-list-globals
Read bytecode from stdin - list summary of globals
* --targets-list
List available targets
* --object-list-sections
Read object file from stdin - list sections
* --object-list-symbols
Read object file from stdin - list symbols (like nm)
* --disassemble
Read lines of triple, hex ascii machine code from stdin - print disassembly
* --calc
Read lines of name, rpn from stdin - print generated module ir
Differential-Revision: http://llvm-reviews.chandlerc.com/D1776
llvm-svn: 193233
- Workaround for ocamlopt producing outputs adjacent to its source inputs, by
having the tests copy the inputs into temporary directories in the output
paths before building.
- Patch by edward-san.
llvm-svn: 189081
- Instead of setting the suffixes in a bunch of places, just set one master
list in the top-level config. We now only modify the suffix list in a few
suites that have one particular unique suffix (.ml, .mc, .yaml, .td, .py).
- Aside from removing the need for a bunch of lit.local.cfg files, this enables
4 tests that were inadvertently being skipped (one in
Transforms/BranchFolding, a .s file each in DebugInfo/AArch64 and
CodeGen/PowerPC, and one in CodeGen/SI which is now failing and has been
XFAILED).
- This commit also fixes a bunch of config files to use config.root instead of
older copy-pasted code.
llvm-svn: 188513
I shaved this yak because I mistakenly thought that this was one of the
last grep tests. Turns out my search was skipping .ll files, for which
there are ~1200 more tests using grep.
llvm-svn: 185819
another mechanical change accomplished though the power of terrible Perl
scripts.
I have manually switched some "s to 's to make escaping simpler.
While I started this to fix tests that aren't run in all configurations,
the massive number of tests is due to a really frustrating fragility of
our testing infrastructure: things like 'grep -v', 'not grep', and
'expected failures' can mask broken tests all too easily.
Essentially, I'm deeply disturbed that I can change the testsuite so
radically without causing any change in results for most platforms. =/
llvm-svn: 159547
* Removed test/lib/llvm.exp - it is no longer needed
* Deleted the dg.exp reading code from test/lit.cfg. There are no dg.exp files
left in the test suite so this code is no longer required. test/lit.cfg is
now much shorter and clearer
* Removed a lot of duplicate code in lit.local.cfg files that need access to
the root configuration, by adding a "root" attribute to the TestingConfig
object. This attribute is dynamically computed to provide the same
information as was previously provided by the custom getRoot functions.
* Documented the config.root attribute in docs/CommandGuide/lit.pod
llvm-svn: 153408
Amaury Sechet