If we are only truncating bits from the extend we should be able to just use a smaller extend.
If we are truncating more than the extend we should be able to just use a fptrunc since the presense of the fpextend shouldn't affect rounding.
Differential Revision: https://reviews.llvm.org/D43970
llvm-svn: 326595
NFC intended, syndicate common code to a parametric base class. Part of the original problem is that InvokeInst is a TerminatorInst, unlike CallInst. the problem is solved by introducing a parametrized class paramtertized by its base.
Differential Revision: https://reviews.llvm.org/D40727
llvm-svn: 325778
The failures happened because of assert which was overconfident about
SCEV's proving capabilities and is generally not valid.
Differential Revision: https://reviews.llvm.org/D42835
llvm-svn: 324473
Sometimes `isLoopEntryGuardedByCond` cannot prove predicate `a > b` directly.
But it is a common situation when `a >= b` is known from ranges and `a != b` is
known from a dominating condition. Thia patch teaches SCEV to sum these facts
together and prove strict comparison via non-strict one.
Differential Revision: https://reviews.llvm.org/D42835
llvm-svn: 324453
Summary:
It's unclear if this is the only thing we can do but at least this is consistent with the check
of address space agreement in `isBitCastable`.
The code is used at least in both instcombine and jumpthreading though
I could only find a way to trigger the invalid cast in instcombine.
Reviewers: loladiro, sanjoy, majnemer
Reviewed By: sanjoy
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34335
llvm-svn: 316302
Summary:
FastISel::hasTrivialKill() was the only user of the "IntPtrTy" version of
Cast::isNoopCast(). According to review comments in D37894 we could instead
use the "DataLayout" version of the method, and thus get rid of the
"IntPtrTy" versions of isNoopCast() completely.
With the above done, the remaining isNoopCast() could then be simplified
a bit more.
Reviewers: arsenm
Reviewed By: arsenm
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D38497
llvm-svn: 314969
Summary:
When checking if a constant expression is a noop cast we fetched the
IntPtrType by doing DL->getIntPtrType(V->getType())). However, there can
be cases where V doesn't return a pointer, and then getIntPtrType()
triggers an assertion.
Now we pass DataLayout to isNoopCast so the method itself can determine
what the IntPtrType is.
Reviewers: arsenm
Reviewed By: arsenm
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D37894
llvm-svn: 314763
OpenCL 2.0 introduces the notion of memory scopes in atomic operations to
global and local memory. These scopes restrict how synchronization is
achieved, which can result in improved performance.
This change extends existing notion of synchronization scopes in LLVM to
support arbitrary scopes expressed as target-specific strings, in addition to
the already defined scopes (single thread, system).
The LLVM IR and MIR syntax for expressing synchronization scopes has changed
to use *syncscope("<scope>")*, where <scope> can be "singlethread" (this
replaces *singlethread* keyword), or a target-specific name. As before, if
the scope is not specified, it defaults to CrossThread/System scope.
Implementation details:
- Mapping from synchronization scope name/string to synchronization scope id
is stored in LLVM context;
- CrossThread/System and SingleThread scopes are pre-defined to efficiently
check for known scopes without comparing strings;
- Synchronization scope names are stored in SYNC_SCOPE_NAMES_BLOCK in
the bitcode.
Differential Revision: https://reviews.llvm.org/D21723
llvm-svn: 307722
This method doesn't do any initializing. It just contains asserts. So renaming to AssertOK makes it consistent with similar instructions in other Instruction classes.
llvm-svn: 306277
These used to be virtual methods that would enable doing the right thing with only a TerminatorInst pointer. I believe they were also acting as vtable anchors in my cases. I think the fact that they had a separate name ending in V was to allow a version without V to be called without a virtual call in a pre-C++11 final keyword world.
Where possible the base methods in TerminatorInst dispatch directly to the public methods in the classes that have the same signature. For some classes this wasn't possible so I've left private method versions that match the name and signature of the version in TerminatorInst. All versions have been moved into the class definitions since we no longer need vtable anchors here.
Differential Revision: https://reviews.llvm.org/D34011
llvm-svn: 305028
I did this a long time ago with a janky python script, but now
clang-format has built-in support for this. I fed clang-format every
line with a #include and let it re-sort things according to the precise
LLVM rules for include ordering baked into clang-format these days.
I've reverted a number of files where the results of sorting includes
isn't healthy. Either places where we have legacy code relying on
particular include ordering (where possible, I'll fix these separately)
or where we have particular formatting around #include lines that
I didn't want to disturb in this patch.
This patch is *entirely* mechanical. If you get merge conflicts or
anything, just ignore the changes in this patch and run clang-format
over your #include lines in the files.
Sorry for any noise here, but it is important to keep these things
stable. I was seeing an increasing number of patches with irrelevant
re-ordering of #include lines because clang-format was used. This patch
at least isolates that churn, makes it easy to skip when resolving
conflicts, and gets us to a clean baseline (again).
llvm-svn: 304787
Summary:
Fairly straightforward patch to fill in some of the holes in the
attributes API with respect to accessing parameter/argument attributes.
The patch aims to step further towards encapsulating the
idx+FirstArgIndex pattern to access these attributes to within the
AttributeList.
Patch by Daniel Neilson!
Reviewers: rnk, chandlerc, pete, javed.absar, reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33355
llvm-svn: 304329
Summary:
Before this change, AttributeLists stored a pair of index and
AttributeSet. This is memory efficient if most arguments do not have
attributes. However, it requires doing a search over the pairs to test
an argument or function attribute. Profiling shows that this loop was
0.76% of the time in 'opt -O2' of sqlite3.c, because LLVM constantly
tests values for nullability.
This was worth about 2.5% of mid-level optimization cycles on the
sqlite3 amalgamation. Here are the full perf results:
https://reviews.llvm.org/P7995
Here are just the before and after cycle counts:
```
$ perf stat -r 5 ./opt_before -O2 sqlite3.bc -o /dev/null
13,274,181,184 cycles # 3.047 GHz ( +- 0.28% )
$ perf stat -r 5 ./opt_after -O2 sqlite3.bc -o /dev/null
12,906,927,263 cycles # 3.043 GHz ( +- 0.51% )
```
This patch *does not* change the indices used to query attributes, as
requested by reviewers. Tracking whether an index is usable for array
indexing is a huge pain that affects many of the internal APIs, so it
would be good to come back later and do a cleanup to remove this
internal adjustment.
Reviewers: pete, chandlerc
Subscribers: javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D32819
llvm-svn: 303654
Summary:
Implements PR889
Removing the virtual table pointer from Value saves 1% of RSS when doing
LTO of llc on Linux. The impact on time was positive, but too noisy to
conclusively say that performance improved. Here is a link to the
spreadsheet with the original data:
https://docs.google.com/spreadsheets/d/1F4FHir0qYnV0MEp2sYYp_BuvnJgWlWPhWOwZ6LbW7W4/edit?usp=sharing
This change makes it invalid to directly delete a Value, User, or
Instruction pointer. Instead, such code can be rewritten to a null check
and a call Value::deleteValue(). Value objects tend to have their
lifetimes managed through iplist, so for the most part, this isn't a big
deal. However, there are some places where LLVM deletes values, and
those places had to be migrated to deleteValue. I have also created
llvm::unique_value, which has a custom deleter, so it can be used in
place of std::unique_ptr<Value>.
I had to add the "DerivedUser" Deleter escape hatch for MemorySSA, which
derives from User outside of lib/IR. Code in IR cannot include MemorySSA
headers or call the MemoryAccess object destructors without introducing
a circular dependency, so we need some level of indirection.
Unfortunately, no class derived from User may have any virtual methods,
because adding a virtual method would break User::getHungOffOperands(),
which assumes that it can find the use list immediately prior to the
User object. I've added a static_assert to the appropriate OperandTraits
templates to help people avoid this trap.
Reviewers: chandlerc, mehdi_amini, pete, dberlin, george.burgess.iv
Reviewed By: chandlerc
Subscribers: krytarowski, eraman, george.burgess.iv, mzolotukhin, Prazek, nlewycky, hans, inglorion, pcc, tejohnson, dberlin, llvm-commits
Differential Revision: https://reviews.llvm.org/D31261
llvm-svn: 303362
Use variadic templates instead of relying on <cstdarg> + sentinel.
This enforces better type checking and makes code more readable.
Differential Revision: https://reviews.llvm.org/D32541
llvm-svn: 302571
Summary:
Do three things to help with that:
- Add AttributeList::FirstArgIndex, which is an enumerator currently set
to 1. It allows us to change the indexing scheme with fewer changes.
- Add addParamAttr/removeParamAttr. This just shortens addAttribute call
sites that would otherwise need to spell out FirstArgIndex.
- Remove some attribute-specific getters and setters from Function that
take attribute list indices. Most of these were only used from
BuildLibCalls, and doesNotAlias was only used to test or set if the
return value is malloc-like.
I'm happy to split the patch, but I think they are probably easier to
review when taken together.
This patch should be NFC, but it sets the stage to change the indexing
scheme to this, which is more convenient when indexing into an array:
0: func attrs
1: retattrs
2...: arg attrs
Reviewers: chandlerc, pete, javed.absar
Subscribers: david2050, llvm-commits
Differential Revision: https://reviews.llvm.org/D32811
llvm-svn: 302060
This eliminates many extra 'Idx' induction variables in loops over
arguments in CodeGen/ and Target/. It also reduces the number of places
where we assume that ReturnIndex is 0 and that we should add one to
argument numbers to get the corresponding attribute list index.
NFC
llvm-svn: 301666
This avoids the confusing 'CS.paramHasAttr(ArgNo + 1, Foo)' pattern.
Previously we were testing return value attributes with index 0, so I
introduced hasReturnAttr() for that use case.
llvm-svn: 300367
and to expose a handle to represent the actual case rather than having
the iterator return a reference to itself.
All of this allows the iterator to be used with common STL facilities,
standard algorithms, etc.
Doing this exposed some missing facilities in the iterator facade that
I've fixed and required some work to the actual iterator to fully
support the necessary API.
Differential Revision: https://reviews.llvm.org/D31548
llvm-svn: 300032
From a user prospective, it forces the use of an annoying nullptr to mark the end of the vararg, and there's not type checking on the arguments.
The variadic template is an obvious solution to both issues.
Differential Revision: https://reviews.llvm.org/D31070
llvm-svn: 299949
Module::getOrInsertFunction is using C-style vararg instead of
variadic templates.
From a user prospective, it forces the use of an annoying nullptr
to mark the end of the vararg, and there's not type checking on the
arguments. The variadic template is an obvious solution to both
issues.
llvm-svn: 299925
LLVM makes several assumptions about address space 0. However,
alloca is presently constrained to always return this address space.
There's no real way to avoid using alloca, so without this
there is no way to opt out of these assumptions.
The problematic assumptions include:
- That the pointer size used for the stack is the same size as
the code size pointer, which is also the maximum sized pointer.
- That 0 is an invalid, non-dereferencable pointer value.
These are problems for AMDGPU because alloca is used to
implement the private address space, which uses a 32-bit
index as the pointer value. Other pointers are 64-bit
and behave more like LLVM's notion of generic address
space. By changing the address space used for allocas,
we can change our generic pointer type to be LLVM's generic
pointer type which does have similar properties.
llvm-svn: 299888
Module::getOrInsertFunction is using C-style vararg instead of
variadic templates.
From a user prospective, it forces the use of an annoying nullptr
to mark the end of the vararg, and there's not type checking on the
arguments. The variadic template is an obvious solution to both
issues.
Patch by: Serge Guelton <serge.guelton@telecom-bretagne.eu>
Differential Revision: https://reviews.llvm.org/D31070
llvm-svn: 299699
This moves it to the iterator facade utilities giving it full random
access semantics, etc. It can also now be used with standard algorithms
like std::all_of and std::any_of and range adaptors like llvm::reverse.
Also make the semantics of iterating match what every other iterator
uses and forbid decrementing past the begin iterator. This was used as
a hacky way to work around iterator invalidation. However, every
instance trying to do this failed to actually avoid touching invalid
iterators despite the clear documentation that the removed and all
subsequent iterators become invalid including the end iterator. So I've
added a return of the next iterator to removeCase and rewritten the
loops that were doing this to correctly follow the iterator pattern of
either incremneting or removing and assigning fresh values to the
iterator and the end.
In one case we were trying to go backwards to make this cleaner but it
doesn't actually work. I've made that code match the code we use
everywhere else to remove cases as we iterate. This changes the order of
cases in one test output and I moved that test to CHECK-DAG so it
wouldn't care -- the order isn't semantically meaningful anyways.
llvm-svn: 298791
Summary:
This class is a list of AttributeSetNodes corresponding the function
prototype of a call or function declaration. This class used to be
called ParamAttrListPtr, then AttrListPtr, then AttributeSet. It is
typically accessed by parameter and return value index, so
"AttributeList" seems like a more intuitive name.
Rename AttributeSetImpl to AttributeListImpl to follow suit.
It's useful to rename this class so that we can rename AttributeSetNode
to AttributeSet later. AttributeSet is the set of attributes that apply
to a single function, argument, or return value.
Reviewers: sanjoy, javed.absar, chandlerc, pete
Reviewed By: pete
Subscribers: pete, jholewinski, arsenm, dschuff, mehdi_amini, jfb, nhaehnle, sbc100, void, llvm-commits
Differential Revision: https://reviews.llvm.org/D31102
llvm-svn: 298393
Summary:
While woring on mapping attributes in the C API, it clearly appeared that the recent changes in the API on the C++ side left Function and Call/Invoke with an attribute API that grew in an ad hoc manner. This makes it difficult to work with it, because one doesn't know which overloads exists and which do not.
Make sure that getter/setter function exists for both enum and string version. Remove inconsistent getter/setter, unless they have many callsites.
This should make it easier to work with attributes in the future.
This doesn't change how attribute works.
Reviewers: bkramer, whitequark, mehdi_amini, void
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D21514
llvm-svn: 281019
In order to make the optimizer smarter about using the 'returned' argument
attribute (generally, but motivated by my llvm.noalias intrinsic work), add a
utility function to Call/InvokeInst, and CallSite, to make it easy to get the
returned call argument (when one exists).
P.S. There is already an unfortunate amount of code duplication between
CallInst and InvokeInst, and this adds to it. We should probably clean that up
separately.
Differential Revision: http://reviews.llvm.org/D22204
llvm-svn: 275031
Summary: As per title. This completes the C API Attribute support.
Reviewers: Wallbraker, whitequark, echristo, rafael, jyknight
Subscribers: mehdi_amini
Differential Revision: http://reviews.llvm.org/D21365
llvm-svn: 272811
We neglected to transfer operand bundles for some transforms. These
were found via inspection, I'll try to come up with some test cases.
llvm-svn: 268011
This is part of solving PR27344:
https://llvm.org/bugs/show_bug.cgi?id=27344
CGP should undo the SimplifyCFG transform for the same reason that earlier patches have used this
same mechanism: it's possible that passes between SimplifyCFG and CGP may be able to optimize the
IR further with a select in place.
For the TLI hook default, >99% taken or not taken is chosen as the default threshold for a highly
predictable branch. Even the most limited HW branch predictors will be correct on this branch almost
all the time, so even a massive mispredict penalty perf loss would be overcome by the win from all
the times the branch was predicted correctly.
As a follow-up, we could make the default target hook less conservative by using the SchedMachineModel's
MispredictPenalty. Or we could just let targets override the default by implementing the hook with that
and other target-specific options. Note that trying to statically determine mispredict rates for
close-to-balanced profile weight data is generally impossible if the HW is sufficiently advanced. Ie,
50/50 taken/not-taken might still be 100% predictable.
Finally, note that this patch as-is will not solve PR27344 because the current __builtin_unpredictable()
branch weight default values are 4 and 64. A proposal to change that is in D19435.
Differential Revision: http://reviews.llvm.org/D19488
llvm-svn: 267572
Craig Topper