Select G_PHI to PHI and manually constrain the result register. This is
very similar to how COPY is handled, so extract and reuse some of that
code.
llvm-svn: 321797
We used to handle G_CONSTANT with pointer type by forcing the type of
the result register to s32 and then letting TableGen handle it.
Unfortunately, setting the type only works for generic virtual
registers, that haven't yet been constrained to a register class (e.g.
those used only by a COPY later on). If the result register has already
been constrained as a use of a previously selected instruction, then
setting the type will assert.
It would be nice to be able to teach TableGen to select pointer
constants the same as integer constants, but since it's such an edge
case (at the moment the only pointer constant that we're generally
interested in is 0, and that is mostly used for comparisons and selects,
which are also not supported by TableGen) it's probably not worth the
effort right now. Instead, handle pointer constants with some trivial
handwritten code.
llvm-svn: 321793
Pointer constants are pretty rare, since we usually represent them as
integer constants and then cast to pointer. One notable exception is the
null pointer constant, which is represented directly as a G_CONSTANT 0
with pointer type. Mark it as legal and make sure it is selected like
any other integer constant.
llvm-svn: 321354
We get an assertion in RegBankSelect for code along the lines of
my_32_bit_int = my_64_bit_int, which tends to translate into a 64-bit
load, followed by a G_TRUNC, followed by a 32-bit store. This appears in
a couple of places in the test-suite.
At the moment, the legalizer doesn't distinguish between integer and
floating point scalars, so a 64-bit load will be marked as legal for
targets with VFP, and so will the rest of the sequence, leading to a
slightly bizarre G_TRUNC reaching RegBankSelect.
Since the current support for 64-bit integers is rather immature, this
patch works around the issue by explicitly handling this case in
RegBankSelect and InstructionSelect. In the future, we may want to
revisit this decision and make sure 64-bit integer loads are narrowed
before reaching RegBankSelect.
llvm-svn: 321165
This patch splits atomics out of the generic G_LOAD/G_STORE and into their own
G_ATOMIC_LOAD/G_ATOMIC_STORE. This is a pragmatic decision rather than a
necessary one. Atomic load/store has little in implementation in common with
non-atomic load/store. They tend to be handled very differently throughout the
backend. It also has the nice side-effect of slightly improving the common-case
performance at ISel since there's no longer a need for an atomicity check in the
matcher table.
All targets have been updated to remove the atomic load/store check from the
G_LOAD/G_STORE path. AArch64 has also been updated to mark
G_ATOMIC_LOAD/G_ATOMIC_STORE legal.
There is one issue with this patch though which also affects the extending loads
and truncating stores. The rules only match when an appropriate G_ANYEXT is
present in the MIR. For example,
(G_ATOMIC_STORE (G_TRUNC:s16 (G_ANYEXT:s32 (G_ATOMIC_LOAD:s16 X))))
will match but:
(G_ATOMIC_STORE (G_ATOMIC_LOAD:s16 X))
will not. This shouldn't be a problem at the moment, but as we get better at
eliminating extends/truncates we'll likely start failing to match in some
cases. The current plan is to fix this in a patch that changes the
representation of extending-load/truncating-store to allow the MMO to describe
a different type to the operation.
llvm-svn: 319691
When lowering a G_BRCOND, we generate a TSTri of the condition against
1, which sets the flags, and then a Bcc which branches based on the
value of the flags.
Unfortunately, we were using the wrong condition code to check whether
we need to branch (EQ instead of NE), which caused all our branches to
do the opposite of what they were intended to do. This patch fixes the
issue by using the correct condition code.
llvm-svn: 319313
Summary:
This patch adds a LLVM_ENABLE_GISEL_COV which, like LLVM_ENABLE_DAGISEL_COV,
causes TableGen to instrument the generated table to collect rule coverage
information. However, LLVM_ENABLE_GISEL_COV goes a bit further than
LLVM_ENABLE_DAGISEL_COV. The information is written to files
(${CMAKE_BINARY_DIR}/gisel-coverage-* by default). These files can then be
concatenated into ${LLVM_GISEL_COV_PREFIX}-all after which TableGen will
read this information and use it to emit warnings about untested rules.
This technique could also be used by SelectionDAG and can be further
extended to detect hot rules and give them priority over colder rules.
Usage:
* Enable LLVM_ENABLE_GISEL_COV in CMake
* Build the compiler and run some tests
* cat gisel-coverage-[0-9]* > gisel-coverage-all
* Delete lib/Target/*/*GenGlobalISel.inc*
* Build the compiler
Known issues:
* ${LLVM_GISEL_COV_PREFIX}-all must be generated as a manual
step due to a lack of a portable 'cat' command. It should be the
concatenation of all ${LLVM_GISEL_COV_PREFIX}-[0-9]* files.
* There's no mechanism to discard coverage information when the ruleset
changes
Depends on D39742
Reviewers: ab, qcolombet, t.p.northover, aditya_nandakumar, rovka
Reviewed By: rovka
Subscribers: vsk, arsenm, nhaehnle, mgorny, kristof.beyls, javed.absar, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D39747
llvm-svn: 318356
Get rid of the handwritten instruction selector code for handling
G_CONSTANT. This code wasn't checking all the preconditions correctly
anyway, so it's better to leave it to TableGen, which can handle at
least some cases correctly (e.g. MOVi, MOVi16, folding into binary
operations). Also add tests to cover those cases.
llvm-svn: 318146
Summary:
This fixes PR35221.
Use pseudo-instructions to let MachineCSE hoist global address computation.
Subscribers: aemerson, javed.absar, kristof.beyls, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D39871
llvm-svn: 318081
Unfortunately TableGen doesn't handle this yet:
Unable to deduce gMIR opcode to handle Src (which is a leaf).
Just add some temporary hand-written code to generate the proper MOVsr.
llvm-svn: 315071
Use the STI member of ARMInstructionSelector instead of
TII.getSubtarget() and also make use of STI's methods instead of
checking the object format manually.
llvm-svn: 312522
In RWPI code, globals that are not read-only are accessed relative to
the SB register (R9). This is achieved by explicitly generating an ADD
instruction between SB and an offset that we either load from a constant
pool or movw + movt into a register.
llvm-svn: 312521
In the ROPI relocation model, read-only variables are accessed relative
to the PC. We use the (MOV|LDRLIT)_ga_pcrel pseudoinstructions for this.
llvm-svn: 312323
Support the selection of G_GLOBAL_VALUE in the PIC relocation model. For
simplicity we use the same pseudoinstructions for both Darwin and ELF:
(MOV|LDRLIT)_ga_pcrel(_ldr).
This is new for ELF, so it requires a small update to the ARM pseudo
expansion pass to make sure it adds the correct constant pool modifier
and add-current-address in the case of ELF.
Differential Revision: https://reviews.llvm.org/D36507
llvm-svn: 311992
With this change, the GlobalISel library gets always built. In
particular, this is not possible to opt GlobalISel out of the build
using the LLVM_BUILD_GLOBAL_ISEL variable any more.
llvm-svn: 309990
Add support in the instruction selector for G_GLOBAL_VALUE for ELF and
MachO for the static relocation model. We don't handle Windows yet
because that's Thumb-only, and we don't handle Thumb in general at the
moment.
Support for PIC, ROPI, RWPI and TLS will be added in subsequent commits.
Differential Revision: https://reviews.llvm.org/D35883
llvm-svn: 309927
Summary:
Now that we have control flow in place, fuse the per-rule tables into a
single table. This is a compile-time saving at this point. However, this will
also enable the optimization of a table so that similar instructions can be
tested together, reducing the time spent on the matching the code.
This is NFC in terms of externally visible behaviour but some internals have
changed slightly. State.MIs is no longer reset between each rule that is
attempted because it's not necessary to do so. As a consequence of this the
restriction on the order that instructions are added to State.MIs has been
relaxed to only affect recorded instructions that require new elements to be
added to the vector. GIM_RecordInsn can now write to any element from 1 to
State.MIs.size() instead of just State.MIs.size().
The compile-time regressions from the last commit were caused by the ARM target
including a non-const variable (zero_reg) in the table and therefore generating
an initializer for it. That variable is now const.
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D35681
llvm-svn: 309264
Insert a TSTri to set the flags and a Bcc to branch based on their
values. This is a bit inefficient in the (common) cases where the
condition for the branch comes from a compare right before the branch,
since we set the flags both as part of the compare lowering and as part
of the branch lowering. We're going to live with that until we settle on
a principled way to handle this kind of situation, which occurs with
other patterns as well (combines might be the way forward here).
llvm-svn: 308009
Refactor CmpHelper into something simpler. It was overkill to use
templates for this - instead, use a simple CmpConstants structure to
hold the opcodes and other constants that are different when selecting
int / float / double comparisons. Also, extract some of the helpers that
were in CmpHelper into ARMInstructionSelector and make use of some of
them when selecting other things than just compares.
llvm-svn: 307766
We lower to a sequence consisting of:
- MOVi 0 into a register
- VCMPS to do the actual comparison and set the VFP flags
- FMSTAT to move the flags out of the VFP unit
- MOVCCi to either use the "zero register" that we have previously set
with the MOVi, or move 1 into the result register, based on the values
of the flags
As was the case with soft-float, for some predicates (one, ueq) we
actually need two comparisons instead of just one. When that happens, we
generate two VCMPS-FMSTAT-MOVCCi sequences and chain them by means of
using the result of the first MOVCCi as the "zero register" for the
second one. This is a bit overkill, since one comparison followed by
two non-flag-setting conditional moves should be enough. In any case,
the backend manages to CSE one of the comparisons away so it doesn't
matter much.
Note that unlike SelectionDAG and FastISel, we always use VCMPS, and not
VCMPES. This makes the code a lot simpler, and it also seems correct
since the LLVM Lang Ref defines simple true/false returns if the
operands are QNaN's. For SNaN's, even VCMPS throws an Invalid Operand
exception, so they won't be slipping through unnoticed.
Implementation-wise, this introduces a template so we can share the same
code that we use for handling integer comparisons, since the only
differences are in the details (exact opcodes to be used etc). Hopefully
this will be easy to extend to s64 G_FCMP.
llvm-svn: 307365
Summary:
Replace the matcher if-statements for each rule with a state-machine. This
significantly reduces compile time, memory allocations, and cumulative memory
allocation when compiling AArch64InstructionSelector.cpp.o after r303259 is
recommitted.
The following patches will expand on this further to fully fix the regressions.
Reviewers: rovka, ab, t.p.northover, qcolombet, aditya_nandakumar
Reviewed By: ab
Subscribers: vitalybuka, aemerson, javed.absar, igorb, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D33758
llvm-svn: 307079
* Mark as legal for (s32, i1, s32, s32)
* Map everything into GPRs
* Select to two instructions: a CMP of the condition against 0, to set
the flags, and a MOVCCr to select between the two inputs based on the
flags that we've just set
llvm-svn: 306382
Add support throughout the pipeline:
- mark as legal for s32 and pointers
- map to GPRs
- lower to a sequence of instructions, which moves 0 or 1 into the
result register based on the flags set by a CMPrr
We have copied from FastISel a helper function which maps CmpInst
predicates into ARMCC codes. Ideally, we should be able to move it
somewhere that both FastISel and GlobalISel can use.
llvm-svn: 305672
According to the commit message from r296921, G_MERGE_VALUES and
G_INSERT are to be preferred over G_SEQUENCE. Therefore, stop generating
G_SEQUENCE in the ARM backend and remove the code dealing with it.
This boils down to the code breaking up double values for the soft float
calling convention. Use G_MERGE_VALUES + G_UNMERGE_VALUES instead of
G_SEQUENCE + G_EXTRACT for it. This maps very nicely to VMOVDRR +
VMOVRRD and simplifies the code in the instruction selector.
There's one occurence of G_SEQUENCE left in arm-irtranslator.ll, but
that is part of the target-independent code for translating constant
structs. Therefore, it is beyond the scope of this commit.
llvm-svn: 304902
It only failed on llvm-clang-x86_64-expensive-checks-win, probably
because the TableGen stuff hasn't been regenerated.
Requires a clean build.
llvm-svn: 303252
G_ANYEXT can be introduced by the legalizer when widening scalars. Add
support for it in the register bank info (same mapping as everything
else) and in the instruction selector.
When selecting it, we treat it as a COPY, just like G_TRUNC. On this
occasion we get rid of some assertions in selectCopy so we can reuse it.
This shouldn't be a problem at the moment since we're not supporting any
complicated cases (e.g. FPR, different register banks). We might want to
separate the paths when we do.
llvm-svn: 302778
Emit and use the TableGen instruction selector for ARM. At the moment,
this allows us to remove the hand-written code for selecting G_SDIV and
G_UDIV.
Future commits will focus on increasing the code coverage for it and
removing more dead code from the current instruction selector.
llvm-svn: 301905
Declare the ARMInstructionSelector in an anonymous namespace, to make it
more in line with the other targets which were migrated to this in
r299637 in order to avoid TableGen'erated headers being included in
non-GlobalISel builds.
llvm-svn: 301632
Add support for both targets with hardware division and without. For
hardware division we have to add support throughout the pipeline
(legalizer, reg bank select, instruction select). For targets without
hardware division, we only need to mark it as a libcall.
llvm-svn: 301164
When selecting a G_CONSTANT to a MOVi, we need the value to be an Imm
operand. We used to just leave the G_CONSTANT operand unchanged, which
works in some cases (such as the GEP offsets that we create when
referring to stack slots). However, in many other places the G_CONSTANTs
are created with CImm operands. This patch makes sure to handle those as
well, and to error out gracefully if in the end we don't end up with an
Imm operand.
Thanks to Oliver Stannard for reporting this issue.
llvm-svn: 301162
Select them as copies. We only select if both the source and the
destination are on the same register bank, so this shouldn't cause any
trouble.
llvm-svn: 300971
Support G_MUL, very similar to G_ADD and G_SUB. The only difference is
in the instruction selector, where we have to select either MUL or MULv5
depending on the target.
llvm-svn: 300665
A bit more painful than G_INSERT because it was more widely used, but this
should simplify the handling of extract operations in most locations.
llvm-svn: 297100
There used to be a check in the IRTranslator that prevented us from having to
deal with atomic loads/stores. That check has been removed in r294993 and the
AArch64 backend was updated accordingly. This commit does the same thing for the
ARM backend.
In general, in the ARM backend we introduce fences during the atomic expand
pass, so we don't have to worry about atomics, *except* for the 32-bit ARMv8
target, which handles atomics more like AArch64. Since we don't want to worry
about that yet, just bail out of instruction selection if we find any atomic
loads.
llvm-svn: 295662
Since they're only used for passing around double precision floating point
values into the general purpose registers, we'll lower them to VMOVDRR and
VMOVRRD.
llvm-svn: 295310
Diana Picus