This patch allows $AT to be used as a register name in assembly files.
Currently only $at is recognized as a valid register name.
Patch by Stanislav Ocovaj.
Differential Revision: https://reviews.llvm.org/D34348
llvm-svn: 306007
Rather than creating a separate ".rdata" section distinct from the
customary ".rodata" in ELF, ".rdata" switches to the ".rodata" section.
This patch relands r305949 and r305950 with the correct commit message
and addresses nit raised during review.
Patch By: John Baldwin!
Differential Revision: https://reviews.llvm.org/D34452
llvm-svn: 305995
This patch adds one more condition in selection DINS/INS
instruction, which fixes MultiSource/Applications/JM/ldecod/
for mips32r2 (and mips64r2 n32 abi).
Differential Revision: https://reviews.llvm.org/D33725
llvm-svn: 305888
This reverts commit r305455. This commit was reported as breaking one of
the sanitizer buildbots. Reverting until lab.llvm.org comes back online.
llvm-svn: 305557
Author: milena.vujosevic.janicic
Reviewers: sdardis
The patch extends size reduction pass for MicroMIPS.
The following instructions are examined and transformed, if possible:
ADDIU instruction is transformed into 16-bit instruction ADDIUSP
ADDIU instruction is transformed into 16-bit instruction ADDIUR1SP
Differential Revision: https://reviews.llvm.org/D33887
llvm-svn: 305455
For multiprecision arithmetic on MIPS, rather than using ISD::ADDE / ISD::ADDC,
get SelectionDAG to break down the operation into ISD::ADDs and ISD::SETCCs.
For MIPS, only the DSP ASE has a carry flag, so in the general case it is not
useful to directly support ISD::{ADDE, ADDC, SUBE, SUBC} nodes.
Also improve the generation code in such cases for targets with
TargetLoweringBase::ZeroOrOneBooleanContent by directly using the result of the
comparison node rather than using it in selects. Similarly for ISD::SUBE /
ISD::SUBC.
Address optimization breakage by moving the generation of MIPS specific integer
multiply-accumulate nodes to before legalization.
This revolves PR32713 and PR33424.
Thanks to Simonas Kazlauskas and Pirama Arumuga Nainar for reporting the issue!
Reviewers: slthakur
Differential Revision: https://reviews.llvm.org/D33494
llvm-svn: 305389
This patch fixes two systemic machine verifier errors in the long
branch pass. The first is the incorrect basic block successors
and the second was the incorrect construction of several jump
instructions.
This partially resolves PR27458 and the associated PR32146.
Reviewers: slthakur
Differential Revision: https://reviews.llvm.org/D33378
llvm-svn: 305382
While simplifying branches in the MachineInstr representation, the
routine BuildCondBr must preserve flags on register MachineOperands. In
particular, it must preserve the <undef> flag.
This fixes a bug that is unlikely to occur in any real scenario, but
which bugpoint is likely to introduce.
Patch By Nick Johnson!
Reviewers: ahatanak, sdardis
Differential Revision: https://reviews.llvm.org/D34041
llvm-svn: 305290
By target hookifying getRegisterType, getNumRegisters, getVectorBreakdown,
backends can request that LLVM to scalarize vector types for calls
and returns.
The MIPS vector ABI requires that vector arguments and returns are passed in
integer registers. With SelectionDAG's new hooks, the MIPS backend can now
handle LLVM-IR with vector types in calls and returns. E.g.
'call @foo(<4 x i32> %4)'.
Previously these cases would be scalarized for the MIPS O32/N32/N64 ABI for
calls and returns if vector types were not legal. If vector types were legal,
a single 128bit vector argument would be assigned to a single 32 bit / 64 bit
integer register.
By teaching the MIPS backend to inspect the original types, it can now
implement the MIPS vector ABI which requires a particular method of
scalarizing vectors.
Previously, the MIPS backend relied on clang to scalarize types such as "call
@foo(<4 x float> %a) into "call @foo(i32 inreg %1, i32 inreg %2, i32 inreg %3,
i32 inreg %4)".
This patch enables the MIPS backend to take either form for vector types.
The previous version of this patch had a "conditional move or jump depends on
uninitialized value".
Reviewers: zoran.jovanovic, jaydeep, vkalintiris, slthakur
Differential Revision: https://reviews.llvm.org/D27845
llvm-svn: 305083
Changed immediate type for repl.ph from uimm10 to simm10 as per the specs.
Repl.qb still accepts uimm8. Both instructions now mimic the behaviour of
GNU as.
Patch by Stefan Maksimovic.
Differential Revision: https://reviews.llvm.org/D33594
llvm-svn: 304918
The clang compiler by default uses FastISel when invoked with -O0, which
is also the default. In that case, passing of -mxgot does not get honored,
i.e. the code path that is to deal with large got is not taken.
Clang produces same output regardless of -mxgot being present or not.
This change checks whether -mxgot is passed as an option, and turns off
FastISel if it is.
Patch by Stefan Maksimovic.
Differential Revision: https://reviews.llvm.org/D33593
llvm-svn: 304906
This creates a new library called BinaryFormat that has all of
the headers from llvm/Support containing structure and layout
definitions for various types of binary formats like dwarf, coff,
elf, etc as well as the code for identifying a file from its
magic.
Differential Revision: https://reviews.llvm.org/D33843
llvm-svn: 304864
Addition of a feature and a predicate used to control generation of madd.fmt
and similar instructions.
Patch by Stefan Maksimovic.
Differential Revision: https://reviews.llvm.org/D33400
llvm-svn: 304801
I did this a long time ago with a janky python script, but now
clang-format has built-in support for this. I fed clang-format every
line with a #include and let it re-sort things according to the precise
LLVM rules for include ordering baked into clang-format these days.
I've reverted a number of files where the results of sorting includes
isn't healthy. Either places where we have legacy code relying on
particular include ordering (where possible, I'll fix these separately)
or where we have particular formatting around #include lines that
I didn't want to disturb in this patch.
This patch is *entirely* mechanical. If you get merge conflicts or
anything, just ignore the changes in this patch and run clang-format
over your #include lines in the files.
Sorry for any noise here, but it is important to keep these things
stable. I was seeing an increasing number of patches with irrelevant
re-ordering of #include lines because clang-format was used. This patch
at least isolates that churn, makes it easy to skip when resolving
conflicts, and gets us to a clean baseline (again).
llvm-svn: 304787
Author: milena.vujosevic.janicic
Reviewers: sdardis
The patch extends size reduction pass for MicroMIPS.
The following instructions are examined and transformed, if possible:
LBU instruction is transformed into 16-bit instruction LBU16
LHU instruction is transformed into 16-bit instruction LHU16
SB instruction is transformed into 16-bit instruction SB16
SH instruction is transformed into 16-bit instruction SH16
Differential Revision: https://reviews.llvm.org/D33091
llvm-svn: 304550
This adds a callback to the LLVMTargetMachine that lets target indicate
that they do not pass the machine verifier checks in all cases yet.
This is intended to be a temporary measure while the targets are fixed
allowing us to enable the machine verifier by default with
EXPENSIVE_CHECKS enabled!
Differential Revision: https://reviews.llvm.org/D33696
llvm-svn: 304320
TargetPassConfig is not useful for targets that do not use the CodeGen
library, so we may just as well store a pointer to an
LLVMTargetMachine instead of just to a TargetMachine.
While at it, also change the constructor to take a reference instead of a
pointer as the TM must not be nullptr.
llvm-svn: 304247
Summary:
Currently FPOWI defaults to Legal and LegalizeDAG.cpp turns Legal into Expand for this opcode because Legal is a "lie".
This patch changes the default for this opcode to Expand and removes the hack from LegalizeDAG.cpp. It also removes all the code in the targets that set this opcode to Expand themselves since they can just rely on the default.
Reviewers: spatel, RKSimon, efriedma
Reviewed By: RKSimon
Subscribers: jfb, dschuff, sbc100, jgravelle-google, nemanjai, javed.absar, andrew.w.kaylor, llvm-commits
Differential Revision: https://reviews.llvm.org/D33530
llvm-svn: 304215
This patch adds handling of the `micromips` and `nomicromips` attributes
passed by front-end. The patch depends on D33363.
Differential revision: https://reviews.llvm.org/D33364
llvm-svn: 303545
This provides a new way to access the TargetMachine through
TargetPassConfig, as a dependency.
The patterns replaced here are:
* Passes handling a null TargetMachine call
`getAnalysisIfAvailable<TargetPassConfig>`.
* Passes not handling a null TargetMachine
`addRequired<TargetPassConfig>` and call
`getAnalysis<TargetPassConfig>`.
* MachineFunctionPasses now use MF.getTarget().
* Remove all the TargetMachine constructors.
* Remove INITIALIZE_TM_PASS.
This fixes a crash when running `llc -start-before prologepilog`.
PEI needs StackProtector, which gets constructed without a TargetMachine
by the pass manager. The StackProtector pass doesn't handle the case
where there is no TargetMachine, so it segfaults.
Related to PR30324.
Differential Revision: https://reviews.llvm.org/D33222
llvm-svn: 303360
Using arguments with attribute inalloca creates problems for verification
of machine representation. This attribute instructs the backend that the
argument is prepared in stack prior to CALLSEQ_START..CALLSEQ_END
sequence (see http://llvm.org/docs/InAlloca.htm for details). Frame size
stored in CALLSEQ_START in this case does not count the size of this
argument. However CALLSEQ_END still keeps total frame size, as caller can
be responsible for cleanup of entire frame. So CALLSEQ_START and
CALLSEQ_END keep different frame size and the difference is treated by
MachineVerifier as stack error. Currently there is no way to distinguish
this case from actual errors.
This patch adds additional argument to CALLSEQ_START and its
target-specific counterparts to keep size of stack that is set up prior to
the call frame sequence. This argument allows MachineVerifier to calculate
actual frame size associated with frame setup instruction and correctly
process the case of inalloca arguments.
The changes made by the patch are:
- Frame setup instructions get the second mandatory argument. It
affects all targets that use frame pseudo instructions and touched many
files although the changes are uniform.
- Access to frame properties are implemented using special instructions
rather than calls getOperand(N).getImm(). For X86 and ARM such
replacement was made previously.
- Changes that reflect appearance of additional argument of frame setup
instruction. These involve proper instruction initialization and
methods that access instruction arguments.
- MachineVerifier retrieves frame size using method, which reports sum of
frame parts initialized inside frame instruction pair and outside it.
The patch implements approach proposed by Quentin Colombet in
https://bugs.llvm.org/show_bug.cgi?id=27481#c1.
It fixes 9 tests failed with machine verifier enabled and listed
in PR27481.
Differential Revision: https://reviews.llvm.org/D32394
llvm-svn: 302527
Follow up rL290858 by removing the MIPS specific version of XRayTable
emission in favour of the basic version.
This resolves a buildbot failure where the ELF sections were malformed
causing the linker to reject the object files with xray related sections.
Reviewers: dberris, slthakur
Differential Revision: https://reviews.llvm.org/D32808
llvm-svn: 302138
In case of microMIPS mode %gottprel operator should emit microMIPS
relocation R_MICROMIPS_TLS_GOTTPREL, not R_MIPS_TLS_GOTTPREL.
Differential Revision: http://reviews.llvm.org/D32617
llvm-svn: 301763
This broke the Clang build. (Clang-side patch missing?)
Original commit message:
> [IR] Make add/remove Attributes use AttrBuilder instead of
> AttributeList
>
> This change cleans up call sites and avoids creating temporary
> AttributeList objects.
>
> NFC
llvm-svn: 301712
This eliminates many extra 'Idx' induction variables in loops over
arguments in CodeGen/ and Target/. It also reduces the number of places
where we assume that ReturnIndex is 0 and that we should add one to
argument numbers to get the corresponding attribute list index.
NFC
llvm-svn: 301666
Author: milena.vujosevic.janicic
Reviewers: sdardis
The code implements size reduction pass for MicroMIPS.
Load and store instructions are examined and transformed, if possible.
lw32 instruction is transformed into 16-bit instruction lwsp
sw32 instruction is transformed into 16-bit instruction swsp
Arithmetic instrcutions are examined and transformed, if possible.
addu32 instruction is transformed into 16-bit instruction addu16
subu32 instruction is transformed into 16-bit instruction subu16
Differential Revision: https://reviews.llvm.org/D15144
llvm-svn: 301540
Removed micro mips register classes for gp initialization because gp initialization uses pure mips64 instruction. Even when compiling for micro mips, gp initialization can be done with pure mips64 instructions.
Reviewed by Simon Dardis
Differential: D32286
llvm-svn: 301394
r299766 contained a "conditional move or jump depends on uninitialized value"
fault, identified by valgrind. This occurred as MipsFastISel::finishCall(..)
used CCState over MipsCCState. The latter is required for the TableGen'd calling
convention logic due to reliance on pre-analyzing type information to lower call
results/returns of vectors correctly.
This change modifies the MipsCC AnalyzeCallResult to be useful with both the
SelectionDAG and FastISel lowering logic.
Reviewers: slthakur
Differential Revision: https://reviews.llvm.org/D32004
llvm-svn: 301392
Petar Jovanovic