Differential Revision: https://reviews.llvm.org/D36788
M lib/Target/X86/Disassembler/X86DisassemblerDecoder.cpp
M lib/Target/X86/Disassembler/X86DisassemblerDecoder.h
A test/MC/Disassembler/X86/prefixes-i386.s
A test/MC/Disassembler/X86/prefixes-x86_64.s
M test/MC/Disassembler/X86/prefixes.txt
llvm-svn: 311882
Armv8.3-A adds instructions that convert a double-precision floating
point number to a signed 32-bit integer with round towards zero,
designed for improving Javascript performance.
Differential Revision: https://reviews.llvm.org/D36785
llvm-svn: 311448
This adjusts the tests to hopfully pacify the llvm-clang-x86_64-expensive-checks-win
buildbot.
Unlike many other instructions, these instructions have aliases which
take coprocessor registers, gpr register, accumulator (and dsp accumulator)
registers, floating point registers, floating point control registers and
coprocessor 2 data and control operands.
For the moment, these aliases are treated as pseudo instructions which are
expanded into the underlying instruction. As a result, disassembling these
instructions shows the underlying instruction and not the alias.
Reviewers: slthakur, atanasyan
Differential Revision: https://reviews.llvm.org/D35253
llvm-svn: 310834
Add assembler and disassembler support for the ARMv8.3-A pointer
authentication instructions.
Differential Revision: https://reviews.llvm.org/D36517
llvm-svn: 310709
Added assembler and disassembler support for the new Release
Consistent processor consistent instructions, introduced with ARM
v8.3-A for AArch64.
Differential Revision: https://reviews.llvm.org/D36522
llvm-svn: 310575
This reverts r310243. Only MVFR2 is actually restricted to v8 and it'll be a
little while before we can get a proper fix together. Better that we allow
incorrect code than reject correct in the meantime.
llvm-svn: 310384
This patch addresses two issues with assembly and disassembly for VMRS/VMSR:
1.currently VMRS/VMSR instructions accessing fpsid, mvfr{0-2} and fpexc, are
accepted for non ARMv8-A targets.
2. all VMRS/VMSR instructions accept writing/reading to PC and SP, when only
ARMv7-A and ARMv8-A should be allowed to write/read to SP and none to PC.
This patch addresses those issues and adds tests for these cases.
Differential Revision: https://reviews.llvm.org/D36306
llvm-svn: 310243
This adds support for the new 128-bit vector float instructions of z14.
Note that these instructions actually only operate on the f128 type,
since only each 128-bit vector register can hold only one 128-bit
float value. However, this is still preferable to the legacy 128-bit
float instructions, since those operate on pairs of floating-point
registers (so we can hold at most 8 values in registers), while the
new instructions use single vector registers (so we hold up to 32
value in registers).
Adding support includes:
- Enabling the instructions for the assembler/disassembler.
- CodeGen for the instructions. This includes allocating the f128
type now to the VR128BitRegClass instead of FP128BitRegClass.
- Scheduler description support for the instructions.
Note that for a small number of operations, we have no new vector
instructions (like integer <-> 128-bit float conversions), and so
we use the legacy instruction and then reformat the operand
(i.e. copy between a pair of floating-point registers and a
vector register).
llvm-svn: 308196
This adds support for the new 32-bit vector float instructions of z14.
This includes:
- Enabling the instructions for the assembler/disassembler.
- CodeGen for the instructions, including new LLVM intrinsics.
- Scheduler description support for the instructions.
- Update to the vector cost function calculations.
In general, CodeGen support for the new v4f32 instructions closely
matches support for the existing v2f64 instructions.
llvm-svn: 308195
This patch series adds support for the IBM z14 processor. This part includes:
- Basic support for the new processor and its features.
- Support for new instructions (except vector 32-bit float and 128-bit float).
- CodeGen for new instructions, including new LLVM intrinsics.
- Scheduler description for the new processor.
- Detection of z14 as host processor.
Support for the new 32-bit vector float and 128-bit vector float
instructions is provided by separate patches.
llvm-svn: 308194
Unlike many other instructions, these instructions have aliases which
take coprocessor registers, gpr register, accumulator (and dsp accumulator)
registers, floating point registers, floating point control registers and
coprocessor 2 data and control operands.
For the moment, these aliases are treated as pseudo instructions which are
expanded into the underlying instruction. As a result, disassembling these
instructions shows the underlying instruction and not the alias.
Reviewers: slthakur, atanasyan
Differential Revision: https://reviews.llvm.org/D35253
The last version of this patch broke one of the expensive checks buildbots,
this version changes the failing test/MC/Mips/mt/invalid.s and other invalid
tests to write the errors to a file and run FileCheck on that, rather than
relying on the 'not llvm-mc ... <%s 2>&1 | Filecheck %s' idiom.
Hopefully this will sarisfy the buildbot.
llvm-svn: 308023
Unlike many other instructions, these instructions have aliases which
take coprocessor registers, gpr register, accumulator (and dsp accumulator)
registers, floating point registers, floating point control registers and
coprocessor 2 data and control operands.
For the moment, these aliases are treated as pseudo instructions which are
expanded into the underlying instruction. As a result, disassembling these
instructions shows the underlying instruction and not the alias.
Reviewers: slthakur, atanasyan
Differential Revision: https://reviews.llvm.org/D35253
llvm-svn: 307836
This adds all remaining instructions that were still missing, mostly
privileged and semi-privileged system-level instructions. These are
provided for use with the assembler and disassembler only.
This brings the LLVM assembler / disassembler to parity with the
GNU binutils tools.
llvm-svn: 306876
There are a few instructions provided by the high-word facility (z196)
that we cannot easily exploit for code generation. This patch at least
adds those missing instructions for the assembler and disassembler.
This means that now all nonprivileged instructions up to z13 are
supported by the LLVM assembler / disassembler.
llvm-svn: 306821
After fixing (r306173) a failing test in the lld test suite (r306173),
reland r306095.
Original commit message:
[mips] Fix register positions in the aui/daui instructions
Swapped the position of the rt and rs register in the aui/daui
instructions for mips32r6 and mips64r6. With this change, the format of
the generated instructions complies with specifications and GCC.
Patch by Milos Stojanovic.
llvm-svn: 306174
ELF/mips-plt-r6.s in lld-test is failing. Reverting the change.
Original commit message:
[mips] Fix register positions in the aui/daui instructions
Swapped the position of the rt and rs register in the aut/daui
instructions for mips32r6 and mips64r6. With this change, the format of
the generated instructions complies with specifications and GCC.
Patch by Milos Stojanovic.
llvm-svn: 306099
Swapped the position of the rt and rs register in the aut/daui instructions
for mips32r6 and mips64r6. With this change, the format of the generated
instructions complies with specifications and GCC.
Patch by Milos Stojanovic.
Differential Revision: https://reviews.llvm.org/D33988
llvm-svn: 306095
Intrinsic already existed for llvm.SI.tbuffer.store
Needed tbuffer.load and also re-implementing the intrinsic as llvm.amdgcn.tbuffer.*
Added CodeGen tests for the 2 new variants added.
Left the original llvm.SI.tbuffer.store implementation to avoid issues with existing code
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, tony-tye, tpr
Differential Revision: https://reviews.llvm.org/D30687
llvm-svn: 306031
A new Gfx9 dasm test added with approx 29000 cases.
Existing tests extended by (approx.):
* Gfx7 asm: 5000 test cases
* Gfx8 asm: 5000 test cases
* Gfx9 asm: 14400 test cases
* Gfx8 dasm: 5200 test cases
llvm-svn: 305702
Note that if we need the result of both the divide and the modulo then we
compute the modulo based on the result of the divide and not using the new
hardware instruction.
Commit on behalf of STEFAN PINTILIE.
Differential Revision: https://reviews.llvm.org/D33940
llvm-svn: 305210
Changed immediate type for repl.ph from uimm10 to simm10 as per the specs.
Repl.qb still accepts uimm8. Both instructions now mimic the behaviour of
GNU as.
Patch by Stefan Maksimovic.
Differential Revision: https://reviews.llvm.org/D33594
llvm-svn: 304918
This adds assembler / disassembler support for the decimal
floating-point instructions. Since LLVM does not yet have
support for decimal float types, these cannot be used for
codegen at this point.
llvm-svn: 304203
This adds assembler / disassembler support for the hexadecimal
floating-point instructions. Since the Linux ABI does not use
any hex float data types, these are not useful for codegen.
llvm-svn: 304202
AVX512_VPOPCNTDQ is a new feature set that was published by Intel.
The patch represents the LLVM side of the addition of two new intrinsic based instructions (vpopcntd and vpopcntq).
Differential Revision: https://reviews.llvm.org/D33169
llvm-svn: 303858
According to Power ISA V3.0 document, the first source operand of mtvsrdd is constant 0 if r0 is specified. So the corresponding register constraint should be g8rc_nox0.
This bug caused wrong output generated by 401.bzip2 when -mcpu=power9 and fdo are specified.
Differential Revision: https://reviews.llvm.org/D32880
llvm-svn: 302834
We don't use it and it was removed in gfx9, and the encoding
bit repurposed.
Additionally actually using it requires changing the output register
class, which wasn't done anyway.
llvm-svn: 302814
This adds a few missing instructions for the assembler and
disassembler. Those should be the last missing general-
purpose (Chapter 7) instructions for the z10 ISA.
llvm-svn: 302667
This adds the remaining general arithmetic instructions
for assembler / disassembler use. Most of these are not
useful for codegen; a few might be, and those are listed
in the README.txt for future improvements.
llvm-svn: 302665
The assembler and disassmebler test cases started out formatted and
sorted in a particular way, but this got lost over time as patches
were added. Reformat them again. NFC.
llvm-svn: 302642
That's only a required extension as of v8.1a.
Remove it from the "generic" CPU as well: it should only support the
base ISA (and binutils agrees).
Also unify the MC tests into crc.s and arm64-crc32.s
llvm-svn: 302077
This patch adds support for the the LightWeight Profiling (LWP) instructions which are available on all AMD Bulldozer class CPUs (bdver1 to bdver4).
Reapplied - this time without changing line endings of existing files.
Differential Revision: https://reviews.llvm.org/D32769
llvm-svn: 302041
This patch adds support for the the LightWeight Profiling (LWP) instructions which are available on all AMD Bulldozer class CPUs (bdver1 to bdver4).
Differential Revision: https://reviews.llvm.org/D32769
llvm-svn: 302028
The unused dummy src2_modifiers is missing, so it crashes
when trying to print it.
I tried to fully remove src2_modifiers, but there are some
irritations in the places where it is converted to mad since
it starts to require modifying use lists while iterating over
them.
llvm-svn: 299861
- corrected DS_GWS_* opcodes (see VI_Shader_Programming#16.pdf for detailed description)
- address operand is not used
- several opcodes have data operand
- all opcodes have offset modifier
- DS_AND_SRC2_B32: corrected typo in mnemo
- DS_WRAP_RTN_F32 replaced with DS_WRAP_RTN_B32
- added CI/VI opcodes:
- DS_CONDXCHG32_RTN_B64
- DS_GWS_SEMA_RELEASE_ALL
- added VI opcodes:
- DS_CONSUME
- DS_APPEND
- DS_ORDERED_COUNT
Differential Revision: https://reviews.llvm.org/D31707
llvm-svn: 299767
mfvrd and mffprd are both alias to mfvrsd.
This patch enables correct parsing of the aliases, but we still emit a mfvrsd.
Committing on behalf of brunoalr (Bruno Rosa).
Differential Revision: https://reviews.llvm.org/D29177
llvm-svn: 297849
This patch does the following.
1. Adds an Intrinsic int_x86_clzero which works with __builtin_ia32_clzero
2. Identifies clzero feature using cpuid info. (Function:8000_0008, Checks if EBX[0]=1)
3. Adds the clzero feature under znver1 architecture.
4. The custom inserter is added in Lowering.
5. A testcase is added to check the intrinsic.
6. The clzero instruction is added to assembler test.
Patch by Ganesh Gopalasubramanian with a couple formatting tweaks, a disassembler test, and using update_llc_test.py from me.
Differential revision: https://reviews.llvm.org/D29385
llvm-svn: 294558
This patch checks the number of operands in the resulting
instruction instead of just the alias, then skips over
tied operands when generating the printing method.
This allows us to generate the preferred assembly syntax
for the AArch64 'ins' instruction, which should always be
displayed as 'mov' according to the ARMARM.
Several unit tests have changed as a result, but only to
reflect the preferred disassembly.
Some other InstAlias patterns (movk/bic/orr) needed a
slight adjustment to stop them becoming the default
and breaking other unit tests.
Patch by Graham Hunter.
Differential Revision: https://reviews.llvm.org/D29219
llvm-svn: 294437
Summary:
Adds the following instructions:
* mfpmr
* mtpmr
* icblc
* icblq
* icbtls
Fix the scheduling for mtspr on e5500, which uses CFX0, instead of
SFX0/SFX1 as on e500mc.
Addresses PR 31538.
Differential Revision: https://reviews.llvm.org/D29002
llvm-svn: 293417
Summary: Small change to get the FREEP instruction to decode properly.
Reviewers: craig.topper
Reviewed By: craig.topper
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29193
llvm-svn: 293314
Reason: broke ASAN bots with a global buffer overflow.
http://lab.llvm.org:8011/builders/sanitizer-x86_64-linux-fast/builds/2291
Each test contains 20-30K test cases but takes only several (from 4 to 10)
seconds to complete on average machine. The tests cover the majority of
AMDGPU Gfx7/Gfx8 instructions, including many dark corners, and intended
to quickly find out if something is broken.
llvm-svn: 292974
Each test contains 20-30K test cases but takes only several (from 4 to 10)
seconds to complete on average machine. The tests cover the majority of
AMDGPU Gfx7/Gfx8 instructions, including many dark corners, and intended
to quickly find out if something is broken.
llvm-svn: 292922
Permit explicit $fcc<X> operand in c.cond.fmt instruction.
Add c.cond.fmt to the MIPS to microMIPS instruction mapping table.
Check that $fcc1 - $fcc7 are unusable for MIPS-I to MIPS-III for
c.cond.fmt, bc1t, bc1f.
Reviewers: seanbruno, zoran.jovanovic, vkalintiris
Differential Revision: https://reviews.llvm.org/D24510
llvm-svn: 292117
Summary: Real instruction should copy constraints from real instruction. This allows auto-generated disassembler to correctly process tied operands.
Reviewers: nhaustov, vpykhtin, tstellarAMD
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, tony-tye
Differential Revision: https://reviews.llvm.org/D27847
llvm-svn: 290336
Since 32-bit instructions with 32-bit input immediate behavior
are used to materialize 16-bit constants in 32-bit registers
for 16-bit instructions, determining the legality based
on the size is incorrect. Change operands to have the size
specified in the type.
Also adds a workaround for a disassembler bug that
produces an immediate MCOperand for an operand that
is supposed to be OPERAND_REGISTER.
The assembler appears to accept out of bounds immediates and
truncates them, but this seems to be an issue for 32-bit
already.
llvm-svn: 289306
Add assembler support for all atomic instructions that weren't already
supported. Some of those could be used to implement codegen for 128-bit
atomic operations, but this isn't done here yet.
llvm-svn: 288526
Add assembler support for instructions manipulating the FPC.
Also add codegen support via the GCC compatibility builtins:
__builtin_s390_sfpc
__builtin_s390_efpc
llvm-svn: 288525
This adds assembler support for the instructions provided by the
execution-hint facility (NIAI and BP(R)P). This required adding
support for the new relocation types for 12-bit and 24-bit PC-
relative offsets used by the BP(R)P instructions.
llvm-svn: 288031
This patch adds assembler support for the remaining branch instructions:
the non-relative branch on count variants, and all variants of branch
on index.
The only one of those that can be readily exploited for code generation
is BRCTH (branch on count using a high 32-bit register as count). Do
use it, however, it is necessary to also introduce a hew CHIMux pseudo
to allow comparisons of a 32-bit value agains a short immediate to go
into a high register as well (implemented via CHI/CIH).
This causes a bit of codegen changes overall, but those have proven to
be neutral (or even beneficial) in performance measurements.
llvm-svn: 288029
This patch moves formation of LOC-type instructions from (late)
IfConversion to the early if-conversion pass, and in some cases
additionally creates them directly from select instructions
during DAG instruction selection.
To make early if-conversion work, the patch implements the
canInsertSelect / insertSelect callbacks. It also implements
the commuteInstructionImpl and FoldImmediate callbacks to
enable generation of the full range of LOC instructions.
Finally, the patch adds support for all instructions of the
load-store-on-condition-2 facility, which allows using LOC
instructions also for high registers.
Due to the use of the GRX32 register class to enable high registers,
we now also have to handle the cases where there are still no single
hardware instructions (conditional move from a low register to a high
register or vice versa). These are converted back to a branch sequence
after register allocation. Since the expandRAPseudos callback is not
allowed to create new basic blocks, this requires a simple new pass,
modelled after the ARM/AArch64 ExpandPseudos pass.
Overall, this patch causes significantly more LOC-type instructions
to be used, and results in a measurable performance improvement.
llvm-svn: 288028
This adds support for the compare logical and trap (memory)
instructions that were added as part of the miscellaneous
instruction extensions feature with zEC12.
llvm-svn: 286587
This adds support for the LZRF/LZRG/LLZRGF instructions that were
added on z13, and uses them for code generation were appropriate.
SystemZDAGToDAGISel::tryRISBGZero is updated again to prefer LLZRGF
over RISBG where both would be possible.
llvm-svn: 286586
This adds support for the 31-to-64-bit zero extension instructions
LLGT and LLGTR and uses them for code generation where appropriate.
Since this operation can also be performed via RISBG, we have to
update SystemZDAGToDAGISel::tryRISBGZero so that we prefer LLGT
over RISBG in case both are possible. The patch includes some
simplification to the tryRISBGZero code; this is not intended
to cause any (further) functional change in codegen.
llvm-svn: 286585
This completes assembler / disassembler support for all BFP
instructions provided by the floating-point extensions facility.
The instructions added here are not currently used for codegen.
llvm-svn: 286285
Add several instructions that operate on the program mask
or the addressing mode. These are not really needed for
code generation under Linux, but are provided for completeness
for the assembler/disassembler.
llvm-svn: 286284
Add the 16 access registers as LLVM registers. This allows removing
a lot of special cases in the assembler and disassembler where we
were handling access registers; this can all just use the generic
register code now.
Also add a bunch of instructions to operate on access registers,
for assembler/disassembler use only. No change in code generation
intended.
llvm-svn: 286283
Rework patterns for branches, call & return instructions,
compare-and-branch, compare-and-trap, and conditional move
instructions.
In particular, simplify creation of patterns for the extended
opcodes of instructions that take a CC mask.
Also, use semantical instruction classes for all the instructions
instead of open-coding them in SystemZInstrInfo.td.
Adds a couple of the basic branch instructions (that are unused
for codegen) for the assembler/disassembler.
llvm-svn: 286263
Fixes Bug 30808.
Note that passing subtarget information to predicates seems too complicated, so gfx8-specific def smrd_offset_20 introduced.
Old gfx6/7-specific def renamed to smrd_offset_8 for clarity.
Lit tests updated.
Differential Revision: https://reviews.llvm.org/D26085
llvm-svn: 285590
LLVM currently treats the first operand of MVCK as if it were a
regular base+index+displacement address. However, it is in fact
a base+displacement combined with a length register field.
While the two might look syntactically similar, there are two
semantic differences:
- %r0 is a valid length register, even though it cannot be used
as an index register.
- In an expression with just a single register like 0(%rX), the
register is treated as base with normal addresses, while it is
treated as the length register (with an empty base) for MVCK.
Fixed by adding a new operand parser class BDRAddr and reworking
the assembler parser to distinguish between address + length
register operands and regular addresses.
llvm-svn: 285574
Most z13 vector instructions have a base form where the data type of
the operation (whether to consider the vector to be 16 bytes, 8
halfwords, 4 words, or 2 doublewords) is encoded into a mask field,
and then a set of extended mnemonics where the mask field is not
present but the data type is encoded into the mnemonic name.
Currently, LLVM only supports the type-specific forms (since those
are really the ones needed for code generation), but not the base
type-generic forms.
To complete the assembler support and make it fully compatible with
the GNU assembler, this commit adds assembler aliases for all the
base forms of the various vector instructions.
It also adds two more alias forms that are documented in the PoP:
VFPSO/VFPSODB/WFPSODB -- generic form of VFLCDB etc.
VNOT -- special variant of VNO
llvm-svn: 284586
The vfee[bhf], vfene[bhf], and vistr[bhf] assembler mnemonics are
documented in the Principles of Operation to have an optional last
operand to encode arbitrary values in a mask field.
This commit adds support for those optional operands, and cleans up
the patterns to generate vector string instruction as bit. No change
to code generation intended.
llvm-svn: 284585
For compatiblity with binutils, define these instructions to take
two registers with a 16bit unsigned immediate. Both of the registers
have to be same for dahi and dati.
Reviewers: dsanders, zoran.jovanovic
Differential Review: https://reviews.llvm.org/D21473
llvm-svn: 284218
These instructions were only defined for microMIPSR6 previously. Add
definitions for MIPSR6, correct definitions for microMIPSR6, flag these
instructions as having unmodelled side effects (they disable/enable
virtual processors) and add missing disassember tests for microMIPSR6.
Reviewers: vkalintiris
Differential Review: https://reviews.llvm.org/D24291
llvm-svn: 284115
Add rsqrt.[ds], recip.[ds] for MIPS. Correct the microMIPS definitions for
architecture support and register usage.
Reviewers: vkalintiris, zoran.jovanoic
Differential Review: https://reviews.llvm.org/D24499
llvm-svn: 283334
Add rsqrt.[ds], recip.[ds] for MIPS. Correct the microMIPS definitions for
architecture support and register usage.
Reviewers: vkalintiris, zoran.jovanoic
Differential Review: https://reviews.llvm.org/D24499
llvm-svn: 282485
For compatiblity with binutils, define these instructions to take
two registers with a 16bit unsigned immediate. Both of the registers
have to be same for dahi and dati.
Reviewers: vkalintiris, dsanders, zoran.jovanovic
Differential Review: https://reviews.llvm.org/D21473
llvm-svn: 281724
dcbf has an optional hint-like field, add support for the extended form and the
associated mnemonics (dcbfl and dcbflp).
Partially fixes PR24796.
llvm-svn: 280559
Summary:
Add instruction formats E, RSI, SSd, SSE, and SSF.
Added BRXH, BRXLE, PR, MVCK, STRAG, and ECTG instructions to test out
those formats.
Reviewers: uweigand
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D23179
llvm-svn: 277822
Summary:
This is one possible solution to the problem of ignoring constraints that Simon
raised in D21473 but it's a bit of a hack.
The integrated assembler currently ignores violations of the tied register
constraints when the operands involved in a tie are both present in the AsmText.
For example, 'dati $rs, $rt, $imm' with the '$rs = $rt' will silently replace
$rt with $rs. So 'dati $2, $3, 1' is processed as if the user provided
'dati $2, $2, 1' without any diagnostic being emitted.
This is difficult to solve properly because there are multiple parts of the
matcher that are silently forcing these constraints to be met. Tied operands are
rendered to instructions by cloning previously rendered operands but this is
unnecessary because the matcher was already instructed to render the operand it
would have cloned. This is also unnecessary because earlier code has already
replaced the MCParsedOperand with the one it was tied to (so the parsed input
is matched as if it were 'dati <RegIdx 2>, <RegIdx 2>, <Imm 1>'). As a result,
it looks like fixing this properly amounts to a rewrite of the tied operand
handling which affects all targets.
This patch however, merely inserts a checking hook just before the
substitution of MCParsedOperands and the Mips target overrides it. It's not
possible to accurately check the registers are the same this early (because
numeric registers haven't been bound to a register class yet) so it cheats a
bit and checks that the tokens that produced the operand are lexically
identical. This works because tied registers need to have the same register
class but it does have a flaw. It will reject 'dati $4, $a0, 1' for violating
the constraint even though $a0 ends up as the same register as $4.
Reviewers: sdardis
Subscribers: dsanders, llvm-commits, sdardis
Differential Revision: https://reviews.llvm.org/D21994
llvm-svn: 276867
The saturation instructions appeared in v6T2, with DSP extensions, but they
were being accepted / generated on any, with the new introduction of the
saturation detection in the back-end. This commit restricts the usage to
DSP-enable only cores.
Fixes PR28607.
llvm-svn: 276701
Summary: Add support for the z13 instructions LOCHI and LOCGHI which
conditionally load immediate values. Add target instruction info hooks so
that if conversion will allow predication of LHI/LGHI.
Author: RolandF
Reviewers: uweigand
Subscribers: zhanjunl
Commiting on behalf of Roland.
Differential Revision: http://reviews.llvm.org/D22117
llvm-svn: 275086
The way the named arguments for various system instructions are handled at the
moment has a few problems:
- Large-scale duplication between AArch64BaseInfo.h and AArch64BaseInfo.cpp
- That weird Mapping class that I have no idea what I was on when I thought
it was a good idea.
- Searches are performed linearly through the entire list.
- We print absolutely all registers in upper-case, even though some are
canonically mixed case (SPSel for example).
- The ARM ARM specifies sysregs in terms of 5 fields, but those are relegated
to comments in our implementation, with a slightly opaque hex value
indicating the canonical encoding LLVM will use.
This adds a new TableGen backend to produce efficiently searchable tables, and
switches AArch64 over to using that infrastructure.
llvm-svn: 274576
The backend has been around for years, it's pretty ridiculous that we can't
even use the preferred form for printing "MOV" aliases. Unfortunately, TableGen
can't handle the complex predicates when printing so it's a bunch of nasty C++.
Oh well.
llvm-svn: 272865
Support and generate Compare and Traps like CRT, CIT, etc.
Support Trap as legal DAG opcodes and generate "j .+2" for them by default.
Add support for Conditional Traps and use the If Converter to convert them into
the corresponding compare and trap opcodes.
Differential Revision: http://reviews.llvm.org/D21155
llvm-svn: 272419
Another step for unification llvm assembler/disassembler with sp3.
Besides, CodeGen output is a bit improved, thus changes in CodeGen tests.
Assembler/Disassembler tests updated/added.
Differential Revision: http://reviews.llvm.org/D20796
llvm-svn: 271900
new instruction to ARM and AArch64 targets and several system registers.
Patch by: Roger Ferrer Ibanez and Oliver Stannard
Differential Revision: http://reviews.llvm.org/D20282
llvm-svn: 271670
Patch by Nitesh Jain.
Summary: The type of Imm in MipsDisassembler.cpp was incorrect since SignExtend64 return int64_t type.As per the MIPSr6 doc ,the offset is added to the address of the instruction following the branch (not the branch itself), to form a PC-relative effective target address hence “4” is added to the offset. The offset of some test case are update to reflect the changes due to “ + 4 ” offset and new test case for negative offset are added.
Reviewers: dsanders, vkalintiris
Differential Revision: http://reviews.llvm.org/D17540
llvm-svn: 270542
Fixes for MUBUF_Atomic instructions to make operand list valid:
- For RTN insns, make a copy of $vdata_in operand as $vdata.
- Do not add operand for GLC, it is hardcoded and comes as a token.
Workaround to avoid adding multiple default optional operands.
Tests added.
Differential Revision: http://reviews.llvm.org/D20257
llvm-svn: 270049
Summary:
MONITORX/MWAITX instructions provide similar capability to the MONITOR/MWAIT
pair while adding a timer function, such that another termination of the MWAITX
instruction occurs when the timer expires. The presence of the MONITORX and
MWAITX instructions is indicated by CPUID 8000_0001, ECX, bit 29.
The MONITORX and MWAITX instructions are intercepted by the same bits that
intercept MONITOR and MWAIT. MONITORX instruction establishes a range to be
monitored. MWAITX instruction causes the processor to stop instruction execution
and enter an implementation-dependent optimized state until occurrence of a
class of events.
Opcode of MONITORX instruction is "0F 01 FA". Opcode of MWAITX instruction is
"0F 01 FB". These opcode information is used in adding tests for the
disassembler.
These instructions are enabled for AMD's bdver4 architecture.
Patch by Ganesh Gopalasubramanian!
Reviewers: echristo, craig.topper, RKSimon
Subscribers: RKSimon, joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D19795
llvm-svn: 269911
Summary: On Linux, /usr/include/bits/byteswap-16.h defines __byteswap_16(x) as an inlined LRVH (Load Reversed Half-word) instruction. The SystemZ back-end did not support this opcode and the inlined assembly would cause a fatal error.
Reviewers: bryanpkc, uweigand
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18732
llvm-svn: 269688
Most immediates are printed in Aarch64InstPrinter using 'formatImm' macro,
but not all of them.
Implementation contains following rules:
- floating point immediates are always printed as decimal
- signed integer immediates are printed depends on flag settings
(for negative values 'formatImm' macro prints the value as i.e -0x01
which may be convenient when imm is an address or offset)
- logical immediates are always printed as hex
- the 64-bit immediate for advSIMD, encoded in "a🅱️c:d:e:f:g:h" is always printed as hex
- the 64-bit immedaite in exception generation instructions like:
brk, dcps1, dcps2, dcps3, hlt, hvc, smc, svc is always printed as hex
- the rest of immediates is printed depends on availability
of -print-imm-hex
Signed-off-by: Maciej Gabka <maciej.gabka@arm.com>
Signed-off-by: Paul Osmialowski <pawel.osmialowski@arm.com>
Differential Revision: http://reviews.llvm.org/D16929
llvm-svn: 269446
Added support for sendmsg(MSG[, OP[, STREAM_ID]]) syntax
in s_sendmsg and s_sendmsghalt instructions.
The syntax matches the SP3 assembler/disassembler rules.
That is why implicit inputs (like M0 and EXEC) are not printed
to disassembly output anymore.
sendmsg(...) allows only known message types and attributes,
even if literals are used instead of symbolic names.
However, raw literal (without "sendmsg") still can be used,
and that allows for any 16-bit value.
Tests updated/added.
Differential Revision: http://reviews.llvm.org/D19596
llvm-svn: 268762
Summary:
The goal is for each operand type to have its own parse function and
at the same time share common code for tracking state as different
instruction types share operand types (e.g. glc/glc_flat, etc).
Introduce parseAMDGPUOperand which can parse any optional operand.
DPP and Clamp/OMod have custom handling for now. Sam also suggested
to have class hierarchy for operand types instead of table. This
can be done in separate change.
Remove parseVOP3OptionalOps, parseDS*OptionalOps, parseFlatOptionalOps,
parseMubufOptionalOps, parseDPPOptionalOps.
Reduce number of definitions of AsmOperand's and MatchClasses' by using common base class.
Rename AsmMatcher/InstPrinter methods accordingly.
Print immediate type when printing parsed immediate operand.
Use 'off' if offset/index register is unused instead of skipping it to make it more readable (also agreed with SP3).
Update tests.
Reviewers: tstellarAMD, SamWot, artem.tamazov
Subscribers: qcolombet, arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D19584
llvm-svn: 268015
Revert "[Power9] Implement add-pc, multiply-add, modulo, extend-sign-shift, random number, set bool, and dfp test significance".
This patch has caused a functional regression in SPEC2k6 namd, and a performance regression in mesa-pipe.
llvm-svn: 267927
Possibility to specify code of hardware register kept.
Disassemble to symbolic name, if name is known.
Tests updated/added.
Differential Revision: http://reviews.llvm.org/D19335
llvm-svn: 267724
Commit r266977 was reason for failing LLVM test suite with error message: fatal error: error in backend: Cannot select: t17: i32 = rotr t2, t11 ...
llvm-svn: 267418
Order should match the sp3 syntax, where destination (simm16 denoting the hwreg) is coming first.
Differential Revision: http://reviews.llvm.org/D19161
llvm-svn: 266617
Alias 'jic $reg, 0' to 'jrc $reg' and 'jialc $reg, 0' to 'jalrc $reg' like
binutils.
This patch was previous committed as r266055 as seemed to have caused some spurious
test failures. They did not reappear after further local testing.
llvm-svn: 266301
This patch corresponds to review:
http://reviews.llvm.org/D17850
This patch implements the following instructions:
cmprb, cmpeqb, cnttzw, cnttzw., cnttzd, cnttzd.
llvm-svn: 266228
Differential Revision: http://reviews.llvm.org/D17137
This patch was reverted after the revertion of dependant patch http://reviews.llvm.org/D17068.
There was the problem with test-suite failure.
The problem is hopefully solved with dependant patch so this patch is commited again.
llvm-svn: 266179
Summary:
Alias 'jic $reg, 0' to 'jrc $reg' and 'jialc $reg, 0' to 'jalrc $reg' like
binutils.
Reviewers: dsanders
Differential Revision: http://reviews.llvm.org/D18856
llvm-svn: 266055
Andrew V. Tischenko