For now we only mark innermost loops for the loop vectorizer. We could later
also mark not-innermost loops to enable the introduction of openmp parallelism.
llvm-svn: 202854
PollyIRBuilder is currently just a typedef to IRBuilder<>. Consequently, this
change should not affect behavior. In subsequent patches we will extend its
functionality to emit loop.parallel metadata.
llvm-svn: 202853
This fixes the buildbots who failed, because the linker eliminated most of the
Polly functionality when building without BUILD_SHARED_LIBS=ON.
Besides fixing the build, this change also brings additional functionality. With
the new separation between the general polly libraries and the functionality for
the polly module, it is now possible to link polly directly into a tool instead
of using requiring users to load a shared library.
llvm-svn: 202762
The module LLVMPolly.so links to that. There is really no reason to build a
large number of mini-libraries here, especially as we do have dependences
between the libraries that are not properly handled and that make linking fail
on darwin.
Submitted-by: David Fang <fang@csl.cornell.edu>
llvm-svn: 202743
We mostly iterate over read-only values. Following a suggestion by Duncan P.N
Exons Smith, we use the construct 'const auto &' for this.
llvm-svn: 202651
clang-formats behaviour has changed for a couple of C++11 formattings. We adapt
Polly to ensure our formatting checks are clean again.
llvm-svn: 202650
clang-format requires a space before the ":" in the foreach loop. Even though
this is surprising to me, we follow this style to make our formatting
consistent with clang-format. I found that this clang-format style is used in a
couple of C++11 examples, hence I believe the fact that clang-format adds a
colon is not a bug but just something I was not used to yet.
llvm-svn: 202648
In 'obsequi' we have a scop in which the current dead code elimination works,
but the generated code is way too complex. To avoid this trouble (and to not
disable the DCE entirely) we add an additional approximative step before
the actual dead code elimination. This should fix one of the two current
nightly-test issues.
Polly could be improved to handle 'obsequi' by teaching it to introduce only a
single parameter for (%1 and zext %1) which halves the number of parameters and
allows polly to derive a simpler representation for the set of live iterations.
However, this needs some time to investigate.
I will commit a test case as soon as we have a reduced one.
llvm-svn: 202010
Sven suggested to use this simpler code generation strategy as the convex_hull
computation is apparently rather inefficient. We do not have a test case that
shows a difference, but, in case we find a test case where this makes a
difference, we can reconsider our decission.
llvm-svn: 201997
In case we do not have valid dependences, we do not run dead code elimination or
the schedule optimizer. This fixes an infinite loop in the dead code
elimination (PR12110).
llvm-svn: 201982
Instead of giving a choice between a precise (but possibly very complex)
analysis and an approximative analysis we now use a hybrid approach which uses N
precise steps followed by one approximating step. The precision of the analysis
can be changed by increasing N. With a default of 'N' = 2, we get fully precise
results for our current test cases and should not run into performance problems
for more complex test cases. We can adjust this value when we got more
experience with this dead code elimination.
llvm-svn: 201888
In case the domain of a statement is empty, the schedule optimizer set by
accident the schedule to a NULL pointer. This is incorrect. Instead, we set
it to an empty isl_map with zero schedule dimensions. We already checked for
this in our test cases, but unfortunately the test cases did not fail as
expected. The assert we add in this commit now ensures that the test cases
fail properly in case we regress on this again.
llvm-svn: 201886
We now skip the debug intrinsics which is a lot better than crashing due to
uncopied metadata references. We should step by step investigate which debug
intrinsics we can copy without trouble.
We still keep the debug location metadata.
llvm-svn: 201860
This pass eliminates loop iterations that compute results that are not used
later on. This can help e.g. in D, where the default zero-initialization is
often unnecessary if right after new values are assigned to an array.
Contributed-by: Peter Conn <conn.peter@gmail.com>
llvm-svn: 201817
We do not have a use for this information at the moment. If we need this at some
point, the "instruction -> access" mapping needs to be enhanced as a single
instruction could then possibly perform multiple accesses.
This patch allows us to build the polyhedral information for scops with scalar
dependences.
llvm-svn: 201815
In rare cases the modification of one scop can effect the validity of other
scops, as code generation of an earlier scop may make the scalar evolution
functions derived for later scops less precise. The example that triggered this
patch was a scop that contained an 'or' expression as follows:
%add13710 = or i32 %j.19, 1
--> {(1 + (4 * %l)),+,2}<nsw><%for.body81>
Scev could only analyze the 'or' as it knew %j.19 is a multiple of 2. This
information was not available after the first scop was code generated (or
independent-blocks was run on it) and SCEV could not derive a precise SCEV
expression any more. This means we could not any more code generate this SCoP.
My current understanding is that there is always the risk that an earlier code
generation change invalidates later scops. As the example we have seen here is
difficult to avoid, we use this occasion to guard us against all such
invalidations.
This patch "solves" this issue by verifying right before we start working on
a detected scop, if this scop is in fact still valid. This adds a certain
overhead. However the verification we run is anyways very fast and secondly
it is only run on detected scops. So the overhead should not be very large. As
a later optimization we could detect scops only on demand, such that we need
to run scop-detections always only a single time.
This should fix the single last failure in the LLVM test-suite for the new
scev-based code generation.
llvm-svn: 201593
The MayAliasSet class is currently not used and just confuses people. We can
reintroduce it in case need a more precise tracking of alias sets.
llvm-svn: 201191
There does not seem to be a reason that we can not support PHI nodes outside of
the scop that reference values within the SCoP. Or at least, the attached test
case seems to do the right thing. We remove the assert for now.
llvm-svn: 200427
In rare cases, a region R which is itself not valid has an indirect child region
that is valid. When R becomes part of a valid region by expansion of another
region, then all children of R have to be erased from the set of valid regions.
This patch ensures that indirect children are erased in addition to direct
children.
Contributed-by: Armin Groesslinger <armin.groesslinger@uni-passau.de>
Tobias: I added a reduced test case and adjusted the logic of the patch to
only recurse until the first child is found.
llvm-svn: 200411
Verification of base addresses is difficult as the independent blocks pass may
introduce aliasing that was not there during scop detection. As a midterm
solution -polly-codegen-scev will remove the need for the independent blocks
pass. For now, we do not verify at compile time that the independent blocks pass
does not make the base addresses loop invariant. Disabling this just removes
one of the multiple safety layers we have. We still can check for correctness
in our regression tests.
llvm-svn: 200315
Array base addresses need to be invariant in the region considered. The base
address has to be computed outside the region, or, when it is computed inside,
the value must not change with the iterations of the loops. For example, when a
two-dimensional array is represented as a pointer to pointers the base address
A[i] in an access A[i][j] changes with i; therefore, such regions have to be
rejected.
Contributed by: Armin Größlinger <armin.groesslinger@uni-passau.de>
llvm-svn: 200314
Restricting Polly to -O3 does not make a lot of sense as it is opt-in anyway
and users who specifically request it should get it. If this causes performance
problems we should rather address them by scheduling the right cleanup passes
then just prevent the user from trying.
Also restricting Polly to -O3 made bugpoint not work with the -O3 flag and polly
enabled.
llvm-svn: 200208
Count the number of computational steps that have been used to solve the
dependence problem and abort in case we reach the "compute-out". This ensures we
do not hang forever in cases the dependence problem is too difficult to solve.
There is just a single case in the LLVM test-suite that runs into the
compute-out. Even in this case, we can probably coalesce some of the parameters
(i32 b, i32 b zext i64, ...) to simplify the problem enough to not hit the
compute out. However, for now we set the compute out in place to address the
general issue. The compute out was choosen such that it stops on a recent laptop
after about 8 seconds.
llvm-svn: 200156
This includes the following very useful isl commit:
commit d962967ab42323ea5ca0398956fbff6a98c782fa
Author: Sven Verdoolaege <skimo@kotnet.org>
Date: Wed Dec 18 12:05:32 2013 +0100
allow the user to impose a bound on the number of low-level operations
This should allow the user to deterministically limit the effort spent on a
computation.
llvm-svn: 200155
This removes the last isl_int dependency in the default build. There are
still some in OpenScop and Scoplib. For those isl-0.12.2 still needs to be used.
llvm-svn: 199585