This reverts commit r204781.
I will follow up to with msan folks to see what is what they
were trying to do with aliases to weak aliases.
llvm-svn: 204784
Aliases are just another name for a position in a file. As such, the
regular symbol resolutions are not applied. For example, given
define void @my_func() {
ret void
}
@my_alias = alias weak void ()* @my_func
@my_alias2 = alias void ()* @my_alias
We produce without this patch:
.weak my_alias
my_alias = my_func
.globl my_alias2
my_alias2 = my_alias
That is, in the resulting ELF file my_alias, my_func and my_alias are
just 3 names pointing to offset 0 of .text. That is *not* the
semantics of IR linking. For example, linking in a
@my_alias = alias void ()* @other_func
would require the strong my_alias to override the weak one and
my_alias2 would end up pointing to other_func.
There is no way to represent that with aliases being just another
name, so the best solution seems to be to just disallow it, converting
a miscompile into an error.
llvm-svn: 204781
Adds the different broadcast instructions to the ReplaceableInstrsAVX2 table.
That way the ExeDepsFix pass can take better decisions when AVX2 broadcasts are
across domain (int <-> float).
In particular, prior to this patch we were generating:
vpbroadcastd LCPI1_0(%rip), %ymm2
vpand %ymm2, %ymm0, %ymm0
vmaxps %ymm1, %ymm0, %ymm0 ## <- domain change penalty
Now, we generate the following nice sequence where everything is in the float
domain:
vbroadcastss LCPI1_0(%rip), %ymm2
vandps %ymm2, %ymm0, %ymm0
vmaxps %ymm1, %ymm0, %ymm0
<rdar://problem/16354675>
llvm-svn: 204770
We need .symtab_shndxr if and only if a symbol references a section with an
index >= 0xff00.
The old code was trying to figure out if the section was needed ahead of time,
making it a fairly dependent on the code actually writing the table. It was
also somewhat conservative and would create the section in cases where it was
not needed.
If I remember correctly, the old structure was there so that the sections were
created in the same order gas creates them. That was valuable when MC's support
for ELF was new and we tested with elf-dump.py.
This patch refactors the symbol table creation to another class and makes it
obvious that .symtab_shndxr is really only created when we are about to output
a reference to a section index >= 0xff00.
While here, also improve the tests to use macros. One file is one section
short of needing .symtab_shndxr, the second one has just the right number.
llvm-svn: 204769
The VSX instruction set has two types of FMA instructions: A-type (where the
addend is taken from the output register) and M-type (where one of the product
operands is taken from the output register). This adds a small pass that runs
just after MI scheduling (and, thus, just before register allocation) that
mutates A-type instructions (that are created during isel) into M-type
instructions when:
1. This will eliminate an otherwise-necessary copy of the addend
2. One of the product operands is killed by the instruction
The "right" moment to make this decision is in between scheduling and register
allocation, because only there do we know whether or not one of the product
operands is killed by any particular instruction. Unfortunately, this also
makes the implementation somewhat complicated, because the MIs are not in SSA
form and we need to preserve the LiveIntervals analysis.
As a simple example, if we have:
%vreg5<def> = COPY %vreg9; VSLRC:%vreg5,%vreg9
%vreg5<def,tied1> = XSMADDADP %vreg5<tied0>, %vreg17, %vreg16,
%RM<imp-use>; VSLRC:%vreg5,%vreg17,%vreg16
...
%vreg9<def,tied1> = XSMADDADP %vreg9<tied0>, %vreg17, %vreg19,
%RM<imp-use>; VSLRC:%vreg9,%vreg17,%vreg19
...
We can eliminate the copy by changing from the A-type to the
M-type instruction. This means:
%vreg5<def,tied1> = XSMADDADP %vreg5<tied0>, %vreg17, %vreg16,
%RM<imp-use>; VSLRC:%vreg5,%vreg17,%vreg16
is replaced by:
%vreg16<def,tied1> = XSMADDMDP %vreg16<tied0>, %vreg18, %vreg9,
%RM<imp-use>; VSLRC:%vreg16,%vreg18,%vreg9
and we remove: %vreg5<def> = COPY %vreg9; VSLRC:%vreg5,%vreg9
llvm-svn: 204768
Although the first two operands are the ones that can be swapped, the tied
input operand is listed before them, so we need to adjust for that.
I have a test case for this, but it goes along with an upcoming commit (so it
will come soon).
llvm-svn: 204748
TableGen will create a lookup table for the A-type FMA instructions providing
their corresponding M-form opcodes. This will be used by upcoming commits.
llvm-svn: 204746
Remove handling of select_cc, since it makes no sense to be there. This
now does nothing, but I'll be adding some handling of other target nodes
soon.
llvm-svn: 204743
Implement Pass::releaseMemory() in BlockFrequencyInfo and
MachineBlockFrequencyInfo. Just delete the private implementation when
not in use. Switch to a std::unique_ptr to make the logic more clear.
<rdar://problem/14292693>
llvm-svn: 204741
If getElementPtr uses a constant as base pointer, then make the constant opaque.
This prevents constant folding it with the offset. The offset can usually be
encoded in the load/store instruction itself and the base address doesn't have
to be rematerialized several times.
llvm-svn: 204739
The cost for the first four stackmap operands was always TCC_Free.
This is only true for the first two operands. All other operands
are TCC_Free if they are within 64bit.
llvm-svn: 204738
Usually opaque constants shouldn't be folded, unless they are simple unary
operations that don't create new constants. Although this shouldn't drop the
opaque constant flag. This commit fixes this.
Related to <rdar://problem/14774662>
llvm-svn: 204737
This used to resort to splitting the 256-bit operation into two 128-bit
shuffles and then recombining the results.
Fixes <rdar://problem/16167303>
llvm-svn: 204735
I found three implementations of this. This splits it out into a new function
and uses it from the three places.
My plan is to add a fourth use when lowering a vector_shuffle:v16i16.
Compared the assembly output of test/CodeGen/X86 before and after.
The only change is due to how the first PSHUFB was generated in
LowerVECTOR_SHUFFLEv8i16. If the shuffle mask specified undef (i.e. -1), the
old implementation would write -1 * 2 and -1 * 2 + 1 (254 and 255) in the
control mask. Now we write 0x80. These are of course interchangeable since
bit 7 decides if a constant zero is written in the result byte. The other
instances of this code use 0x80 consistently.
Related to <rdar://problem/16167303>
llvm-svn: 204734
Summary:
Previously the code didn't check if the before and after types for the
store were pointers to different address spaces. This resulted in
instcombine using a bitcast to convert between pointers to different
address spaces, causing an assertion due to the invalid cast.
It is not be appropriate to use addrspacecast this case because it is
not guaranteed to be a no-op cast. Instead bail out and do not do the
transformation.
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D3117
llvm-svn: 204733
If we have a loop of the form
for (unsigned n = 0; n != (k & -32); n += 32) {}
then we know that n is always divisible by 32 and the loop must
terminate. Even if we have a condition where the loop counter will
overflow it'll always hold this invariant.
PR19183. Our loop vectorizer creates this pattern and it's also
occasionally formed by loop counters derived from pointers.
llvm-svn: 204728
If GT/UGT or LT/ULT were set to expand, a comparison
with a constant would replace it with the illegal
cond code.
There are several more places later in this function that
will have the same basic problem.
Theoretically R600 should hit this problem for a test,
but for some reason it doesn't.
llvm-svn: 204727
Summary:
Remove the XFAIL added in my previous commit and correct the test such that
it correctly tests the expansion of the assembler temporary.
Also added a test to check that $at is always $1 when written by the
user.
Corrected the new assembler temporary warnings so that they are emitted for
numeric registers too.
Differential Revision: http://llvm-reviews.chandlerc.com/D3169
llvm-svn: 204711
Summary:
The assembler temporary is normally $at ($1) but can be reassigned using
'.set at=$reg'. Regardless of which register is nominated as the assembler
temporary, $at remains $1 when written by the user.
Adds warnings under the following conditions:
* The register nominated as the assembler temporary is used by the user.
* '.set noat' is in effect and $at is used by the user.
Both of these only work for named registers. I have a follow up commit that makes it work for numeric registers as well.
XFAIL set-at-directive.s since it incorrectly tests that $at is redefined by
'.set at=$reg'. Testcases will follow in a separate commit.
Patch by David Chisnall
His work was sponsored by: DARPA, AFRL
Differential Revision: http://llvm-reviews.chandlerc.com/D3167
llvm-svn: 204710
This is a pretty straight forward translation for COFF, we just need to
stick the data in a COMDAT section marked as
IMAGE_COMDAT_SELECT_NODUPLICATES.
N.B. We must be careful to avoid sticking entities with private linkage
in COMDAT groups. COFF is pretty hostile to the renaming of entities so
we must be careful to disallow GlobalVariables with unstable names.
llvm-svn: 204703
Extracts coming from phis were being hoisted, while all others were
sunk to their uses. This was inconsistent and didn't seem to serve a
purpose. Changing all extracts to be sunk to uses is a prerequisite
for adding block frequency to the SLP vectorizer's cost model.
I benchmarked the change in isolation (without block frequency). I
only saw noise on x86 and some potentially significant improvements on
ARM. No major regressions is good enough for me.
llvm-svn: 204699
Implement debug_loc.dwo, as well as llvm-dwarfdump support for dumping
this section.
Outlined in the DWARF5 spec and http://gcc.gnu.org/wiki/DebugFission the
debug_loc.dwo section has more variation than the standard debug_loc,
allowing 3 different forms of entry (plus the end of list entry). GCC
seems to, and Clang certainly, only use one form, so I've just
implemented dumping support for that for now.
It wasn't immediately obvious that there was a good refactoring to share
the implementation of dumping support between debug_loc and
debug_loc.dwo, so they're separate for now - ideas welcome or I may come
back to it at some point.
As per a comment in the code, we could choose different forms that may
reduce the number of debug_addr entries we emit, but that will require
further study.
llvm-svn: 204697
This seems excessive - switching section isn't expensive (or if it is
we're already being wasteful, since we emitted the debug_loc section
symbol earlier anyway) and otherwise there's no work that happens in
this function when the list is empty.
llvm-svn: 204696
When register allocator's stage is RS_Spill, we choose spill over using the CSR
for the first time, if the spill cost is lower than CSRCost.
When register allocator's stage is < RS_Split, we choose pre-splitting over
using the CSR for the first time, if the cost of splitting is lower than
CSRCost.
CSRCost is set with command-line option "regalloc-csr-first-time-cost". The
default value is 0 to generate the same codes as before this commit.
With a value of 15 (1 << 14 is the entry frequency), I measured performance
gain of 3% on 253.perlbmk and 1.7% on 197.parser, with instrumented PGO,
on an arm device.
rdar://16162005
llvm-svn: 204690
Factor out two functions calculateRegionSplitCost and doRegionSplit
from tryRegionSplit. These two functions will be used in coming patches.
rdar://16162005
llvm-svn: 204684
No functional change intended.
Merging up-front rather than delaying this task until later. This just
seems simpler and more efficient (avoiding growing the debug loc list
only to have to skip over those post-merged entries, etc).
llvm-svn: 204679
This is used to avoid relocations in the dwo file by allowing
DW_AT_ranges specified in debug_info.dwo to be relative to this base
address. (r204667 implements the base-relative DW_AT_ranges side of
this)
llvm-svn: 204672
This removes the debug_ranges relocations from debug_info.dwo (but
doesn't implement the DW_AT_GNU_ranges_base which is also necessary for
correct functioning)
llvm-svn: 204668
Try to match scalar and first like the other instructions.
Expand 64-bit ands to a pair of 32-bit ands since that is not
available on the VALU.
llvm-svn: 204660
never returns, which is true by design.
Initially assumed that the reason is llvm_unreachable being dependent on NDEBUG.
However, even if llvm_unreachable is replaced by __assume(false), VC still warns in
Release modes but not in Debug modes...
The real reason turned out to be optimization flags.
With /Od in Debug modes the warning is not issued whereas with /O1 it is.
I could not find any documentation to this effect, but it is reproducable:
Try compiling http://msdn.microsoft.com/en-us/library/khwfyc5d(v=vs.90).aspx
with /O1 and then with /Od.
llvm-svn: 204659
As a first step towards real little-endian code generation, this patch
changes the PowerPC MC layer to actually generate little-endian object
files. This involves passing the little-endian flag through the various
layers, including down to createELFObjectWriter so we actually get basic
little-endian ELF objects, emitting instructions in little-endian order,
and handling fixups and relocations as appropriate for little-endian.
The bulk of the patch is to update most test cases in test/MC/PowerPC
to verify both big- and little-endian encodings. (The only test cases
*not* updated are those that create actual big-endian ABI code, like
the TLS tests.)
Note that while the object files are now little-endian, the generated
code itself is not yet updated, in particular, it still does not adhere
to the ELFv2 ABI.
llvm-svn: 204634
Those patterns are used when the load cannot be folded into the related broadcast
during the select phase.
This happens when the load gets additional uses that were not anticipated during
the previous lowering phases (constant vector to constant load, then constant
load reused) or when selection DAG is not able to prove that folding the load
will not create a cycle in the DAG.
<rdar://problem/16074331>
llvm-svn: 204631
This can be observed with the old testcase of CodeGen/X86/pr12312.ll:
47c47
< vorps %ymm0, %ymm1, %ymm0
---
> vorps %ymm1, %ymm0, %ymm0
97c97
< vorps %ymm1, %ymm0, %ymm0
---
> vorps %ymm0, %ymm1, %ymm0
The vector VecIns is populated with all the values from VecInMap. This is done
while iterating VecInMap. VecInMap uses a hash of pointer values so the
resulting order can vary depending on the memory layout.
The fix is to populate the vector VecIns earlier as VecInMap is populated.
This is done in DAG traversal order.
Fixes <rdar://problem/16398806>
llvm-svn: 204623
[PPC64LE] ELFv2 ABI updates for the .opd section
The PPC64 Little Endian (PPC64LE) target supports the ELFv2 ABI, and as
such, does not have a ".opd" section. This is keyed off a _CALL_ELF=2
macro check.
The CALL_ELF check is not clearly documented at this time. The basis
for usage in this patch is from the gcc thread here:
http://gcc.gnu.org/ml/gcc-patches/2013-11/msg01144.html
> Adding comment from Uli:
Looks good to me. I think the old-style JIT doesn't really work
anyway for 64-bit, but at least with this patch LLVM will compile
and link again on a ppc64le host ...
llvm-svn: 204614
I'm under the impression that we used to infer the isCommutable flag from the
instruction-associated pattern. Regardless, we don't seem to do this (at least
by default) any more. I've gone through all of our instruction definitions, and
marked as commutative all of those that should be trivial to commute (by
exchanging the first two operands). There has been special code for the RL*
instructions, and that's not changed.
Before this change, we had the following commutative instructions:
RLDIMI
RLDIMIo
RLWIMI
RLWIMI8
RLWIMI8o
RLWIMIo
XSADDDP
XSMULDP
XVADDDP
XVADDSP
XVMULDP
XVMULSP
After:
ADD4
ADD4o
ADD8
ADD8o
ADDC
ADDC8
ADDC8o
ADDCo
ADDE
ADDE8
ADDE8o
ADDEo
AND
AND8
AND8o
ANDo
CRAND
CREQV
CRNAND
CRNOR
CROR
CRXOR
EQV
EQV8
EQV8o
EQVo
FADD
FADDS
FADDSo
FADDo
FMADD
FMADDS
FMADDSo
FMADDo
FMSUB
FMSUBS
FMSUBSo
FMSUBo
FMUL
FMULS
FMULSo
FMULo
FNMADD
FNMADDS
FNMADDSo
FNMADDo
FNMSUB
FNMSUBS
FNMSUBSo
FNMSUBo
MULHD
MULHDU
MULHDUo
MULHDo
MULHW
MULHWU
MULHWUo
MULHWo
MULLD
MULLDo
MULLW
MULLWo
NAND
NAND8
NAND8o
NANDo
NOR
NOR8
NOR8o
NORo
OR
OR8
OR8o
ORo
RLDIMI
RLDIMIo
RLWIMI
RLWIMI8
RLWIMI8o
RLWIMIo
VADDCUW
VADDFP
VADDSBS
VADDSHS
VADDSWS
VADDUBM
VADDUBS
VADDUHM
VADDUHS
VADDUWM
VADDUWS
VAND
VAVGSB
VAVGSH
VAVGSW
VAVGUB
VAVGUH
VAVGUW
VMADDFP
VMAXFP
VMAXSB
VMAXSH
VMAXSW
VMAXUB
VMAXUH
VMAXUW
VMHADDSHS
VMHRADDSHS
VMINFP
VMINSB
VMINSH
VMINSW
VMINUB
VMINUH
VMINUW
VMLADDUHM
VMULESB
VMULESH
VMULEUB
VMULEUH
VMULOSB
VMULOSH
VMULOUB
VMULOUH
VNMSUBFP
VOR
VXOR
XOR
XOR8
XOR8o
XORo
XSADDDP
XSMADDADP
XSMAXDP
XSMINDP
XSMSUBADP
XSMULDP
XSNMADDADP
XSNMSUBADP
XVADDDP
XVADDSP
XVMADDADP
XVMADDASP
XVMAXDP
XVMAXSP
XVMINDP
XVMINSP
XVMSUBADP
XVMSUBASP
XVMULDP
XVMULSP
XVNMADDADP
XVNMADDASP
XVNMSUBADP
XVNMSUBASP
XXLAND
XXLNOR
XXLOR
XXLXOR
This is a by-inspection change, and I'm not sure how to write a reliable test
case. I would like advice on this, however.
llvm-svn: 204609
Summary:
- If only two registers are passed to a three-register operation, then the
first argument is both source and destination register.
- If a non-register is passed as the last argument, generate the immediate
version of the instruction.
Also mark DADD commutative and add scheduling information (to the generic
scheduler), and implement DSUB.
Patch by David Chisnall
His work was sponsored by: DARPA, AFRL
CC: theraven
Differential Revision: http://llvm-reviews.chandlerc.com/D3148
llvm-svn: 204605
I've done some experimentation with this, and it looks like using the
lower-latency (but lower throughput) copy instruction is essentially always the
right thing to do.
My assumption is that, in order to be relatively sure that the higher-latency
copy will increase throughput, we'd want to have it unlikely to be in-flight
with its use. On the P7, the global completion table (GCT) can hold a maximum
of 120 instructions, shared among all active threads (up to 4), giving 30
instructions per thread. So specifically, I'd require at least that many
instructions between the copy and the use before the high-latency variant is
used.
Trying this, however, over the entire test suite resulted in zero cases where
the high-latency form would be preferable. This may be a consequence of the
fact that the scheduler views copies as free, and so they tend to end up close
to their uses. For this experiment I created a function:
unsigned chooseVSXCopy(MachineBasicBlock &MBB,
MachineBasicBlock::iterator I,
unsigned DestReg, unsigned SrcReg,
unsigned StartDist = 1,
unsigned Depth = 3) const;
with an implementation like:
if (!Depth)
return PPC::XXLOR;
const unsigned MaxDist = 30;
unsigned Dist = StartDist;
for (auto J = I, JE = MBB.end(); J != JE && Dist <= MaxDist; ++J) {
if (J->isTransient() && !J->isCopy())
continue;
if (J->isCall() || J->isReturn() || J->readsRegister(DestReg, TRI))
return PPC::XXLOR;
++Dist;
}
// We've exceeded the required distance for the high-latency form, use it.
if (Dist > MaxDist)
return PPC::XVCPSGNDP;
// If this is only an exit block, use the low-latency form.
if (MBB.succ_empty())
return PPC::XXLOR;
// We've reached the end of the block, check the successor blocks (up to some
// depth), and use the high-latency form if that is okay with all successors.
for (auto J = MBB.succ_begin(), JE = MBB.succ_end(); J != JE; ++J) {
if (chooseVSXCopy(**J, (*J)->begin(), DestReg, SrcReg,
Dist, --Depth) == PPC::XXLOR)
return PPC::XXLOR;
}
// All of our successor blocks seem okay with the high-latency variant, so
// we'll use it.
return PPC::XVCPSGNDP;
and then changed the copy opcode selection from:
Opc = PPC::XXLOR;
to:
Opc = chooseVSXCopy(MBB, std::next(I), DestReg, SrcReg);
In conclusion, I'm removing the FIXME from the comment, because I believe that
there is, at least absent other examples, nothing to fix.
llvm-svn: 204591
This is a pretty straight forward translation for COFF, we just need to
stick the function in a COMDAT section marked as
IMAGE_COMDAT_SELECT_NODUPLICATES.
llvm-svn: 204565
When VSX is available, these instructions should be used in preference to the
older variants that only have access to the scalar floating-point registers.
llvm-svn: 204559
Since the profile can come from 32-bit machines, we need to check the
pointer size. Change the magic number to facilitate this.
Adds tests for reading 32-bit and 64-bit binaries (both big- and
little-endian). The tests write a binary using printf in RUN lines
(like raw-magic-but-no-header.test). Assuming the bots don't complain,
this seems like a better way forward for testing RawInstrProfReader than
committing binary files.
<rdar://problem/16400648>
llvm-svn: 204557
This is similar, but not identical to what gas does. The logic in MC is to just
compute the symbol table after parsing the entire file. GAS is mixed, given
.type b, @object
a = b
b:
.type b, @function
It will propagate the change and make 'a' a function. Given
.type b, @object
b:
a = b
.type b, @function
the type of 'a' is still object.
Since we do the computation in the end, we produce a function in both cases.
llvm-svn: 204555
When a label is parsed, check if there is type information available for the
label. If so, check if the symbol is a function. If the symbol is a function
and we are in thumb mode and no explicit thumb_func has been emitted, adjust the
symbol data to indicate that the function definition is a thumb function.
The application of this inferencing is improved value handling in the object
file (the required thumb bit is set on symbols which are thumb functions). It
also helps improve compatibility with binutils.
The one complication that arises from this handling is the MCAsmStreamer. The
default implementation of getOrCreateSymbolData in MCStreamer does not support
tracking the symbol data. In order to support the semantics of thumb functions,
track symbol data in assembly streamer. Although O(n) in number of labels in
the TU, this is already done in various other streamers and as such the memory
overhead is not a practical concern in this scenario.
llvm-svn: 204544
The cleanup code that removes dead cast instructions only removed them from the
basic block, but didn't delete them. This fix erases them now too.
llvm-svn: 204538
A PHI node usually has only one value/basic block pair per incoming basic block.
In the case of a switch statement it is possible that a following PHI node may
have more than one such pair per incoming basic block. E.g.:
%0 = phi i64 [ 123456, %case2 ], [ 654321, %Entry ], [ 654321, %Entry ]
This is valid and the verfier doesn't complain, because both values are the
same.
Constant hoisting materializes the constant for each operand separately and the
value is still the same, but the variable names have changed. As a result the
verfier can't recognize anymore that they are the same value and complains.
This fix adds special update code for PHI node in constant hoisting to prevent
this corner case.
This fixes <rdar://problem/16394449>
llvm-svn: 204537
This patch renames method 'isConstantSplat' as 'getConstantSplatValue'
(mainly for consistency reasons), and rewrites its logic to ensure
that we always perform a legal 'cast<ConstantSDNode>'.
Added test shift-combine-crash.ll to verify that DAGCombiner no longer crashes with an assertion failure in the attempt to simplify a vector shift by a vector of all undef counts.
llvm-svn: 204536
We make sure a spill is not hoisted to a hotter outer loop by adding
a condition. Hoist a spill to outer loop if there are multiple dependents
(it can be beneficial if more than one dependents are hoisted) or
if DepSV (the hoisting source) is hotter than SV (the hoisting destination).
rdar://16268194
llvm-svn: 204522
Type units have no addresses, so there's no need for DW_AT_addr_base.
This removes another relocation from every skeletal type unit and brings
LLVM's skeletal type units in line with GCC's (containing only
GNU_dwo_name (strp), comp_dir (strp), and GNU_pubnames (flag_present)).
Cary's got some ideas about using str_index in the .o file to reduce
those last two relocations (well, replace two relocations with one
relocation (pointing to the string index) and two indicies)
llvm-svn: 204506
Previously, only regular AArch64 instructions were annotated with SchedRW lists.
This patch does the same for NEON enabling these instructions to be scheduled by
the MIScheduler. Additionally, store operations are now modeled and a few
SchedRW lists were updated for bug fixes (e.g. multiple def operands).
Reviewers: apazos, mcrosier, atrick
Patch by Dave Estes <cestes@codeaurora.org>!
llvm-svn: 204505
Read a raw binary profile that corresponds to a memory dump from the
runtime profile.
The test is a binary file generated from
cfe/trunk/test/Profile/c-general.c with the new compiler-rt runtime and
the matching text version of the input. It includes instructions on how
to regenerate.
<rdar://problem/15950346>
llvm-svn: 204496
This isn't a format we'll want to write out in practice, but moving it
to the writer library simplifies llvm-profdata and isolates it from
further changes to the format.
This also allows us to update the tests to not rely on the text output
format.
llvm-svn: 204489
This introduces the ProfileData library and updates llvm-profdata to
use this library for reading profiles. InstrProfReader is an abstract
base class that will be subclassed for both the raw instrprof data
from compiler-rt and the efficient instrprof format that will be used
for PGO.
llvm-svn: 204482
Summary:
VECTOR_SHUFFLE concatenates the vectors in an vectorwise fashion.
<0b00, 0b01> + <0b10, 0b11> -> <0b00, 0b01, 0b10, 0b11>
VSHF concatenates the vectors in a bitwise fashion:
<0b00, 0b01> + <0b10, 0b11> ->
0b0100 + 0b1110 -> 0b01001110
<0b10, 0b11, 0b00, 0b01>
We must therefore swap the operands to get the correct result.
The test case that discovered the issue was MultiSource/Benchmarks/nbench.
Reviewers: matheusalmeida
Reviewed By: matheusalmeida
Differential Revision: http://llvm-reviews.chandlerc.com/D3142
llvm-svn: 204480
The SReg_(32|64) register classes contain special registers in addition
to the numbered SGPRs. This can lead to machine verifier errors when
these register classes are used as sub-registers for SReg_128, since
SReg_128 only uses the numbered SGPRs.
Replacing SReg_(32|64) with SGPR_(32|64) fixes this problem, since
the SGPR_(32|64) register classes contain only numbered SGPRs.
Tests cases for this are comming in a later commit.
llvm-svn: 204474
...instead of a separate Requires for each one. This style was already
used in some places and seems more compact.
No behavioral change intended.
llvm-svn: 204452
Some targets require more than one relocation entry to perform a relocation.
This change allows processRelocationRef to process more than one relocation
entry at a time by passing the relocation iterator itself instead of just
the relocation entry.
Related to <rdar://problem/16199095>
llvm-svn: 204439
Extend the target hook to take also the operand index into account when
calculating the cost of the constant materialization.
Related to <rdar://problem/16381500>
llvm-svn: 204435
Originally the algorithm would search for expensive constants and track their
users, which could be instructions and constant expressions. This change only
tracks the constants for instructions, but constant expressions are indirectly
covered too. If an operand is an constant expression, then we look through the
expression to find anny expensive constants.
The algorithm keep now track of the instruction and the operand index where the
constant is used. This allows more precise hoisting of constant materialization
code for PHI instructions, because we only hoist to the basic block of the
incoming operand. Before we had to find the idom of all PHI operands and hoist
the materialization code there.
This also makes updating of instructions easier. Before we had to keep track of
the original constant, find it in the instructions, and then replace it. Now we
can just simply update the operand.
Related to <rdar://problem/16381500>
llvm-svn: 204433
This simplifies working with the constant candidates and removes the tight
coupling between the map and the vector.
Related to <rdar://problem/16381500>
llvm-svn: 204431
.data_region is only used in Darwin, so it shouldn't be generated
for other OS. Currently AArch64 doesn't support darwin yet, so
I removed it from AArch64. When Darwin is supported someday, we can
add it back and associate it with Darwin.
llvm-svn: 204424
NumberOfRelocations field in COFF section table is only 16-bit wide. If an
object has more than 65535 relocations, the number of relocations is stored
to VirtualAddress field in the first relocation field, and a special flag
(IMAGE_SCN_LNK_NRELOC_OVFL) is set to Characteristics field.
In test we cheated a bit. I made up a test file so that it has
IMAGE_SCN_LNK_NRELOC_OVFL flag but the number of relocations is much smaller
than 65535. This is to avoid checking in a large test file just to test a
file with many relocations.
Differential Revision: http://llvm-reviews.chandlerc.com/D3139
llvm-svn: 204418
Sicne MBB->computeRegisterLivenes() returns Dead for sub regs like s0,
d0 is used in vpop instead of updating sp, which causes s0 dead before
its use.
This patch checks the liveness of each subreg to make sure the reg is
actually dead.
llvm-svn: 204411
The function exists to force an expression to be absolute, but there it is not
possible to force a symbol reference since
a = b
.long a
means something else.
This is an alternative fix for pr9951 that uses an assert. It then deletes
the old pr9951 test that was testing nothing already.
llvm-svn: 204399
RTDyldMemoryManager, regardless of whether it thinks they're "required for
execution".
Currently, RuntimeDyld only passes sections that are "required for execution"
to the RTDyldMemoryManager, and takes "required for execution" to mean exactly
"contains symbols or relocations". There are two problems with this:
(1) It can drop sections with anonymous data that is referenced by code.
(2) It leaves the JIT client no way to inspect interesting sections that aren't
actually required to run the program (e.g dwarf sections).
A test case is still in the works.
Future work: We may want to replace this with a generic section filtering
mechanism, but that will require more consideration. For now, this flag at least
allows clients to volunteer to do the filtering themselves.
Fixes <rdar://problem/15177691>.
llvm-svn: 204398
This commit extends the coverage of the constant hoisting pass, adds additonal
debug output and updates the function names according to the style guide.
Related to <rdar://problem/16381500>
llvm-svn: 204389
This option caused LowerInvoke to generate code using SJLJ-based
exception handling, but there is no code left that interprets the
jmp_buf stack that the resulting code maintained (llvm.sjljeh.jblist).
This option has been obsolete for a while, and replaced by
SjLjEHPrepare.
This leaves the default behaviour of LowerInvoke, which is to convert
invokes to calls.
Differential Revision: http://llvm-reviews.chandlerc.com/D3136
llvm-svn: 204388
Use the range machinery for DW_AT_ranges and DW_AT_high/lo_pc.
This commit moves us from a single range per subprogram to extending
ranges if we are:
a) In the same section, and
b) In the same enclosing CU.
This means we have more fine grained ranges for compile units, and fewer
ranges overall when we have multiple functions in the same CU
adjacent to each other in the object file.
Also remove all of the earlier hacks around this functionality for
function sections etc. Also update all of the testcases to take into
account the merging functionality.
with a fix for location entries in the debug_loc section:
Make sure that debug loc entries are relative to the low_pc
of the compile unit. This means that when we only have a single
range that the offset should be just relative to the low_pc
of the unit, for multiple ranges for a CU this means that we'll be
relative to 0 which we emit along with DW_AT_ranges.
This mostly shows up with linked binaries, so add a testcase with
multiple CUs so that our location is going to be offset of a CU
with a non-zero low_pc.
llvm-svn: 204377
The Octeon cpu from Cavium Networks is mips64r2 based and has an extended
instruction set. In order to utilize this with LLVM, a new cpu feature "octeon"
and a subtarget feature "cnmips" is added. A small set of new instructions
(baddu, dmul, pop, dpop, seq, sne) is also added. LLVM generates dmul, pop and
dpop instructions with option -mcpu=octeon or -mattr=+cnmips.
llvm-svn: 204337
Timur Iskhodzhanov