The variable mask form of VPERMILPD/VPERMILPS were only partially implemented, with much of it still performed as an intrinsic.
This patch properly defines the instructions in terms of X86ISD::VPERMILPV, permitting the opcode to be easily combined as a target shuffle.
Differential Revision: http://reviews.llvm.org/D17681
llvm-svn: 262635
As shown in:
https://llvm.org/bugs/show_bug.cgi?id=23203
...we currently die because lowering believes that mfence is allowed without SSE2 on x86-64,
but the instruction def doesn't know that.
I don't know if allowing mfence without SSE is right, but if not, at least now it's consistently wrong. :)
Differential Revision: http://reviews.llvm.org/D17219
llvm-svn: 260828
Choose between MOVD/MOVSS and MOVQ/MOVSD depending on the target vector type.
This has a lot fewer test changes than trying to add this to X86InstrInfo::setExecutionDomain.....
llvm-svn: 259816
Follow up to D16217 and D16729
This change uncovered an odd pattern where VZEXT_LOAD v4i64 was being lowered to a load of the lower v2i64 (so the 2nd i64 destination element wasn't being zeroed), I can't find any use/reason for this and have removed the pattern and replaced it so only the 1st i64 element is loaded and the upper bits all zeroed. This matches the description for X86ISD::VZEXT_LOAD
Differential Revision: http://reviews.llvm.org/D16768
llvm-svn: 259635
Officially, we don't acknowledge non-default configurations of MXCSR,
as getting there would require usage of the FENV_ACCESS pragma (at
least insofar as rounding mode is concerned).
We don't support the pragma, so we can assume that the default
rounding mode - round to nearest, ties to even - is always used.
However, it's inconsistent with the rest of the instruction set,
where MXCSR is always effective (unless otherwise specified).
Also, it's an unnecessary obstacle to the few brave souls that use
fenv.h with LLVM.
Avoid the hard-coded rounding mode for fp_to_f16; use MXCSR instead.
llvm-svn: 259448
Use AVX1 FP instructions (vmaskmovps/pd) in place of the AVX2 int instructions (vpmaskmovd/q).
Differential Revision: http://reviews.llvm.org/D16528
llvm-svn: 258675
(64 to 128-bit) matches against the pattern fragment 'vzmovl_v2i64'
(a zero-extended 64-bit load).
However, a change in r248784 teaches the instruction combiner that only
the lower 64 bits of the input to a 128-bit vcvtph2ps are used. This means
the instruction combiner will ordinarily optimize away the upper 64-bit
insertelement instruction in the zero-extension and so we no longer select
the memory-register form. To fix this a new pattern has been added.
Differential Revision: http://reviews.llvm.org/D16067
llvm-svn: 257470
Not folding these cases tends to avoid partial register updates:
sqrtss (%eax), %xmm0
Has a partial update of %xmm0, while
movss (%eax), %xmm0
sqrtss %xmm0, %xmm0
Has a clobber of the high lanes immediately before the partial update,
avoiding a potential stall.
Given this, we only want to fold when optimizing for size.
This is consistent with the patterns we already have for some of
the fp/int converts, and in X86InstrInfo::foldMemoryOperandImpl()
Differential Revision: http://reviews.llvm.org/D15741
llvm-svn: 256671
Part 1 was submitted in http://reviews.llvm.org/D15134.
Changes in this part:
* X86RegisterInfo.td, X86RecognizableInstr.cpp: Add FR128 register class.
* X86CallingConv.td: Pass f128 values in XMM registers or on stack.
* X86InstrCompiler.td, X86InstrInfo.td, X86InstrSSE.td:
Add instruction selection patterns for f128.
* X86ISelLowering.cpp:
When target has MMX registers, configure MVT::f128 in FR128RegClass,
with TypeSoftenFloat action, and custom actions for some opcodes.
Add missed cases of MVT::f128 in places that handle f32, f64, or vector types.
Add TODO comment to support f128 type in inline assembly code.
* SelectionDAGBuilder.cpp:
Fix infinite loop when f128 type can have
VT == TLI.getTypeToTransformTo(Ctx, VT).
* Add unit tests for x86-64 fp128 type.
Differential Revision: http://reviews.llvm.org/D11438
llvm-svn: 255558
These are redundant pairs of nodes defined for
INSERT_VECTOR_ELEMENT/EXTRACT_VECTOR_ELEMENT.
insertelement/extractelement are slightly closer to the corresponding
C++ node name, and has stricter type checking so prefer it.
Update targets to only use these nodes where it is trivial to do so.
AArch64, ARM, and Mips all have various type errors on simple replacement,
so they will need work to fix.
Example from AArch64:
def : Pat<(sext_inreg (vector_extract (v16i8 V128:$Rn), VectorIndexB:$idx), i8),
(i32 (SMOVvi8to32 V128:$Rn, VectorIndexB:$idx))>;
Which is trying to do sext_inreg i8, i8.
llvm-svn: 255359
FP logic instructions are supported in DQ extension on AVX-512 target.
I use integer operations instead.
Added tests.
I also enabled FABS in this patch in order to check ANDPS.
The operations are FOR, FXOR, FAND, FANDN.
The instructions, that supported for 512-bit vector under DQ are:
VORPS/PD, VXORPS/PD, VANDPS/PD, FANDNPS/PD.
Differential Revision: http://reviews.llvm.org/D15110
llvm-svn: 254913
This patch fixes the following issues:
1. Fix the return type of X86psadbw: it should not be the same type of inputs.
For vNi8 inputs the output should be vMi64, where M = N/8.
2. Fix the return type of int_x86_avx512_psad_bw_512 accordingly.
3. Fix the definiton of PSADBW, VPSADBW, and VPSADBWY accordingly.
4. Adjust the return type when building a DAG node of X86ISD::PSADBW type.
5. Update related tests.
Differential revision: http://reviews.llvm.org/D14897
llvm-svn: 254010
We had duplicated definitions for the same hardware '[v]movq' instructions. For example with SSE:
def MOVZQI2PQIrr : RS2I<0x6E, MRMSrcReg, (outs VR128:$dst), (ins GR64:$src),
"mov{d|q}\t{$src, $dst|$dst, $src}", // X86-64 only
[(set VR128:$dst, (v2i64 (X86vzmovl (v2i64 (scalar_to_vector GR64:$src)))))],
IIC_SSE_MOVDQ>;
def MOV64toPQIrr : RS2I<0x6E, MRMSrcReg, (outs VR128:$dst), (ins GR64:$src),
"mov{d|q}\t{$src, $dst|$dst, $src}",
[(set VR128:$dst, (v2i64 (scalar_to_vector GR64:$src)))],
IIC_SSE_MOVDQ>, Sched<[WriteMove]>;
As shown in the test case and PR25554:
https://llvm.org/bugs/show_bug.cgi?id=25554
This causes us to miss reusing an operand because later passes don't know these 'movq' are the same instruction.
This patch deletes one pair of these defs.
Sadly, this won't fix the original test case in the bug report. Something else is still broken.
Differential Revision: http://reviews.llvm.org/D14941
llvm-svn: 253988
This patch detects the AVG pattern in vectorized code, which is simply
c = (a + b + 1) / 2, where a, b, and c have the same type which are vectors of
either unsigned i8 or unsigned i16. In the IR, i8/i16 will be promoted to
i32 before any arithmetic operations. The following IR shows such an example:
%1 = zext <N x i8> %a to <N x i32>
%2 = zext <N x i8> %b to <N x i32>
%3 = add nuw nsw <N x i32> %1, <i32 1 x N>
%4 = add nuw nsw <N x i32> %3, %2
%5 = lshr <N x i32> %N, <i32 1 x N>
%6 = trunc <N x i32> %5 to <N x i8>
and with this patch it will be converted to a X86ISD::AVG instruction.
The pattern recognition is done when combining instructions just before type
legalization during instruction selection. We do it here because after type
legalization, it is much more difficult to do pattern recognition based
on many instructions that are doing type conversions. Therefore, for
target-specific instructions (like X86ISD::AVG), we need to take care of type
legalization by ourselves. However, as X86ISD::AVG behaves similarly to
ISD::ADD, I am wondering if there is a way to legalize operands and result
types of X86ISD::AVG together with ISD::ADD. It seems that the current design
doesn't support this idea.
Tests are added for SSE2, AVX2, and AVX512BW and both i8 and i16 types of
variant vector sizes.
Differential revision: http://reviews.llvm.org/D14761
llvm-svn: 253952
The lowering patterns for X86ISD::VZEXT_MOVL for 128-bit to 256-bit vectors were just copying the lower xmm instead of actually masking off the first scalar using a blend.
Fix for PR25320.
Differential Revision: http://reviews.llvm.org/D14151
llvm-svn: 253561
When matching non-LSB-extracting truncating broadcasts, we now insert
the necessary SRL. If the scalar resulted from a load, the SRL will be
folded into it, creating a narrower, offset, load.
However, i16 loads aren't Desirable, so we get i16->i32 zextloads.
We already catch i16 aextloads; catch these as well.
llvm-svn: 252363
This instructions doesn't have intrincis.
Added tests for lowering and encoding.
Differential Revision: http://reviews.llvm.org/D12317
llvm-svn: 249688
The C standard has historically not specified whether or not these functions should raise the inexact flag. Traditionally on Darwin, these functions *did* raise inexact, and the llvm lowerings followed that conventions. n1778 (C bindings for IEEE-754 (2008)) clarifies that these functions should not set inexact. This patch brings the lowerings for arm64 and x86 in line with the newly specified behavior. This also lets us fold some logic into TD patterns, which is nice.
Differential Revision: http://reviews.llvm.org/D12969
llvm-svn: 248266
Fixes PR23464: one way to use the broadcast intrinsics is:
_mm256_broadcastw_epi16(_mm_cvtsi32_si128(*(int*)src));
We don't currently fold this, but now that we use native IR for
the intrinsics (r245605), we can look through one bitcast to find
the broadcast scalar.
Differential Revision: http://reviews.llvm.org/D10557
llvm-svn: 245613
Since r245605, the clang headers don't use these anymore.
r245165 updated some of the tests already; update the others, add
an autoupgrade, remove the intrinsics, and cleanup the definitions.
Differential Revision: http://reviews.llvm.org/D10555
llvm-svn: 245606
COMISD should receive QWORD because it is defined as
(V)COMISD xmm1, xmm2/m64
COMISS should receive DWORD because it is defined as
(V)COMISS xmm1, xmm2/m32
Differential Revision: http://reviews.llvm.org/D11712
llvm-svn: 245551
This is a follow-up to the FIXME that was added with D7474 ( http://reviews.llvm.org/rL229531 ).
I thought this load folding bug had been made hard-to-hit, but it turns out to be very easy
when targeting 32-bit x86 and causes a miscompile/crash in Wine:
https://bugs.winehq.org/show_bug.cgi?id=38826https://llvm.org/bugs/show_bug.cgi?id=22371#c25
The quick fix is to simply remove the scalar FP logical instructions from the load folding table
in X86InstrInfo, but that causes us to miss load folds that should be possible when lowering fabs,
fneg, fcopysign. So the majority of this patch is altering those lowerings to use *vector* FP
logical instructions (because that's all x86 gives us anyway). That lets us do the load folding
legally.
Differential Revision: http://reviews.llvm.org/D11477
llvm-svn: 243361
SKX supports conversion for all FP types. Integer types include doublewords and quardwords.
I added "Legal" status for these nodes and a bunch of tests.
I added "NoVLX" for AVX DAG selection to force VLX instructions selection when VLX is supported.
Differential Revision: http://reviews.llvm.org/D11255
llvm-svn: 242637
Simon Pilgrim