than just the entire log channel.
Add checks, where appropriate, to make sure a log channel/category has
not been disabled before attempting to write to it.
llvm-svn: 117715
all of the calls inlined in the header file for better performance.
Fixed the summary for C string types (array of chars (with any combo if
modifiers), and pointers to chars) work in all cases.
Fixed an issue where a forward declaration to a clang type could cause itself
to resolve itself more than once if, during the resolving of the type itself
it caused something to try and resolve itself again. We now remove the clang
type from the forward declaration map in the DWARF parser when we start to
resolve it and avoid this additional call. This should stop any duplicate
members from appearing and throwing all the alignment of structs, unions and
classes.
llvm-svn: 117437
loaded/parsed. Should add timers to this eventually.
Delay getting a full UnwindPlan if it's possible to unwind with
just a fast UnwindPlan. This keeps us from reading the eh_frame
section unless we hit something built -fomit-frame pointer or we
hit a frame with no symbol (read: no start address) available.
It doesn't look like it is correctly falling back to using the
full UnwindPlan to provide additional registers that the fast
UnwindPlan doesn't supply; e.g. go to the middle of a stack and
ask for r12 and it will show you the value of r12 in frame 0.
That's a bug for tomorrow.
llvm-svn: 117361
gets to be a problem if you have a unbounded stack walk.
Fix the CFA sanity checks. Add one to the arch default UnwindPlan run which was giving
one extra stack frame on the main thread. Fix a couple of logging lines that had their
argument order incorrect.
llvm-svn: 117350
prologue profiling.
Change the log print statements to elide the thread number, make
some of them only print when IsLogVerbose().
Add a couple of sanity checks for impossible CFA values so backtraces
don't go too far off into the weeds.
llvm-svn: 117343
Not yet enabled as the default unwinder but there are no known
backtrace problems with the code at this point.
Added 'log enable lldb unwind' to help diagnose backtrace problems;
this output needs a little refining but it's a good first step.
eh_frame information is currently read unconditionally - the code
is structured to allow this to be delayed until it's actually needed.
There is a performance hit when you have to parse the eh_frame
information for any largeish executable/library so it's necessary
to avoid if possible.
It's confusing having both the UnwindPlan::RegisterLocation struct
and the RegisterConextLLDB::RegisterLocation struct, I need to rename
one of them.
The writing of registers isn't done in the RegisterConextLLDB subclass
yet; neither is the running of complex DWARF expressions from eh_frame
(e.g. used for _sigtramp on Mac OS X).
llvm-svn: 117256
So the issue here was that we have lldb_private::FileSpec that by default was
always resolving a path when using the:
FileSpec::FileSpec (const char *path);
and in the:
void FileSpec::SetFile(const char *pathname, bool resolve = true);
This isn't what we want in many many cases. One example is you have "/tmp" on
your file system which is really "/private/tmp". You compile code in that
directory and end up with debug info that mentions "/tmp/file.c". Then you
type:
(lldb) breakpoint set --file file.c --line 5
If your current working directory is "/tmp", then "file.c" would be turned
into "/private/tmp/file.c" which won't match anything in the debug info.
Also, it should have been just a FileSpec with no directory and a filename
of "file.c" which could (and should) potentially match any instances of "file.c"
in the debug info.
So I removed the constructor that just takes a path:
FileSpec::FileSpec (const char *path); // REMOVED
You must now use the other constructor that has a "bool resolve" parameter that you must always supply:
FileSpec::FileSpec (const char *path, bool resolve);
I also removed the default parameter to SetFile():
void FileSpec::SetFile(const char *pathname, bool resolve);
And fixed all of the code to use the right settings.
llvm-svn: 116944
but something is still killing our inferior.
Fixed an issue with darwin-debug where it wasn't passing all needed arguments
to the inferior.
Fixed a race condition with the attach to named process code.
llvm-svn: 116697
"vAttachName;<PROCNAME>" packet, and wait for a new process by name to launch
with the "vAttachWait;<PROCNAME>".
Fixed a few issues with attaching where if DoAttach() returned no error, yet
there was no valid process ID, we would deadlock waiting for an event that
would never happen.
Added a new "process launch" option "--tty" that will launch the process
in a new terminal if the Host layer supports the "Host::LaunchInNewTerminal(...)"
function. This currently works on MacOSX and will allow the debugging of
terminal applications that do complex operations with the terminal.
Cleaned up the output when the process resumes, stops and halts to be
consistent with the output format.
llvm-svn: 116693
static bool
Host::GetLLDBPath (lldb::PathType path_type, FileSpec &file_spec);
This will fill in "file_spec" with an appropriate path that is appropriate
for the current Host OS. MacOSX will return paths within the LLDB.framework,
and other unixes will return the paths they want. The current PathType
enums are:
typedef enum PathType
{
ePathTypeLLDBShlibDir, // The directory where the lldb.so (unix) or LLDB mach-o file in LLDB.framework (MacOSX) exists
ePathTypeSupportExecutableDir, // Find LLDB support executable directory (debugserver, etc)
ePathTypeHeaderDir, // Find LLDB header file directory
ePathTypePythonDir // Find Python modules (PYTHONPATH) directory
} PathType;
All places that were finding executables are and python paths are now updated
to use this Host call.
Added another new host call to launch the inferior in a terminal. This ability
will be very host specific and doesn't need to be supported on all systems.
MacOSX currently will create a new .command file and tell Terminal.app to open
the .command file. It also uses the new "darwin-debug" app which is a small
app that uses posix to exec (no fork) and stop at the entry point of the
program. The GDB remote plug-in is almost able launch a process and attach to
it, it currently will spawn the process, but it won't attach to it just yet.
This will let LLDB not have to share the terminal with another process and a
new terminal window will pop up when you launch. This won't get hooked up
until we work out all of the kinks. The new Host function is:
static lldb::pid_t
Host::LaunchInNewTerminal (
const char **argv, // argv[0] is executable
const char **envp,
const ArchSpec *arch_spec,
bool stop_at_entry,
bool disable_aslr);
Cleaned up FileSpec::GetPath to not use strncpy() as it was always zero
filling the entire path buffer.
Fixed an issue with the dynamic checker function where I missed a '$' prefix
that should have been added.
llvm-svn: 116690
tricks to get types to resolve. I did this by correctly including the correct
files: stdint.h and all lldb-*.h files first before including the API files.
This allowed me to remove all of the hacks that were in the lldb.swig file
and it also allows all of the #defines in lldb-defines.h and enumerations
in lldb-enumerations.h to appear in the lldb.py module. This will make the
python script code a lot more readable.
Cleaned up the "process launch" command to not execute a "process continue"
command, it now just does what it should have with the internal API calls
instead of executing another command line command.
Made the lldb_private::Process set the state to launching and attaching if
WillLaunch/WillAttach return no error respectively.
llvm-svn: 115902
Added the start of Host specific launch services, though it currently isn't
hookup up to anything. We want to be able to launch a process and use the
native launch services to launch an app like it would be launched by the
user double clicking on the app. We also eventually want to be able to run
a command line app in a newly spawned terminal to avoid terminal sharing.
Fixed an issue with the new DWARF forward type declaration stuff. A crasher
was found that was happening when trying to properly expand the forward
declarations.
llvm-svn: 115213
whether a given register number is treated as volatile
or not for a given architecture/platform.
approx 450 lines of boilerplate, 50 lines of actual code. :)
llvm-svn: 114537
debug map showed that the location lists in the .o files needed some
refactoring in order to work. The case that was failing was where a function
that was in the "__TEXT.__textcoal_nt" in the .o file, and in the
"__TEXT.__text" section in the main executable. This made symbol lookup fail
due to the way we were finding a real address in the debug map which was
by finding the section that the function was in in the .o file and trying to
find this in the main executable. Now the section list supports finding a
linked address in a section or any child sections. After fixing this, we ran
into issue that were due to DWARF and how it represents locations lists.
DWARF makes a list of address ranges and expressions that go along with those
address ranges. The location addresses are expressed in terms of a compile
unit address + offset. This works fine as long as nothing moves around. When
stuff moves around and offsets change between the remapped compile unit base
address and the new function address, then we can run into trouble. To deal
with this, we now store supply a location list slide amount to any location
list expressions that will allow us to make the location list addresses into
zero based offsets from the object that owns the location list (always a
function in our case).
With these fixes we can now re-link random address ranges inside the debugger
for use with our DWARF + debug map, incremental linking, and more.
Another issue that arose when doing the DWARF in the .o files was that GCC
4.2 emits a ".debug_aranges" that only mentions functions that are externally
visible. This makes .debug_aranges useless to us and we now generate a real
address range lookup table in the DWARF parser at the same time as we index
the name tables (that are needed because .debug_pubnames is just as useless).
llvm-gcc doesn't generate a .debug_aranges section, though this could be
fixed, we aren't going to rely upon it.
Renamed a bunch of "UINT_MAX" to "UINT32_MAX".
llvm-svn: 113829
The Unwind and RegisterContext subclasses still need
to be finished; none of this code is used by lldb at
this point (unless you call into it by hand).
The ObjectFile class now has an UnwindTable object.
The UnwindTable object has a series of FuncUnwinders
objects (Function Unwinders) -- one for each function
in that ObjectFile we've backtraced through during this
debug session.
The FuncUnwinders object has a few different UnwindPlans.
UnwindPlans are a generic way of describing how to find
the canonical address of a given function's stack frame
(the CFA idea from DWARF/eh_frame) and how to restore the
caller frame's register values, if they have been saved
by this function.
UnwindPlans are created from different sources. One source is the
eh_frame exception handling information generated by the compiler
for unwinding an exception throw. Another source is an assembly
language inspection class (UnwindAssemblyProfiler, uses the Plugin
architecture) which looks at the instructions in the funciton
prologue and describes the stack movements/register saves that are
done.
Two additional types of UnwindPlans that are worth noting are
the "fast" stack UnwindPlan which is useful for making a first
pass over a thread's stack, determining how many stack frames there
are and retrieving the pc and CFA values for each frame (enough
to create StackFrameIDs). Only a minimal set of registers is
recovered during a fast stack walk.
The final UnwindPlan is an architectural default unwind plan.
These are provided by the ArchDefaultUnwindPlan class (which uses
the plugin architecture). When no symbol/function address range can
be found for a given pc value -- when we have no eh_frame information
and when we don't have a start address so we can't examine the assembly
language instrucitons -- we have to make a best guess about how to
unwind. That's when we use the architectural default UnwindPlan.
On x86_64, this would be to assume that rbp is used as a stack pointer
and we can use that to find the caller's frame pointer and pc value.
It's a last-ditch best guess about how to unwind out of a frame.
There are heuristics about when to use one UnwindPlan versues the other --
this will all happen in the still-begin-written UnwindLLDB subclass of
Unwind which runs the UnwindPlans.
llvm-svn: 113581
Renamed the "dispatchqaddr" setting that was coming back for stop reply packets
to be named "qaddr" so that gdb doesn't thing it is a register number. gdb
was checking the first character and assuming "di" was a hex register number
because 'd' is a hex digit. It has been shortened so gdb can safely ignore it.
llvm-svn: 113475
execution context only when the process is still alive. When running the test
suite, the debugger is launching and killing processes constantly.
This might be the cause of the test hang as reported in rdar://problem/8377854,
where the debugger was looping infinitely trying to update a supposedly stale
thread list.
llvm-svn: 113022
Added extra logging for stepping.
Fixed an issue where cached stack frame data could be lost between runs when
the thread plans read a stack frame.
llvm-svn: 112973
documentation. Symbol now inherits from the symbol
context scope so that the StackID can use a "SymbolContextScope *"
instead of a blockID (which could have been the same as some other
blockID from another symbol file).
Modified the stacks that are created on subsequent stops to reuse
the previous stack frame objects which will allow for some internal
optimization using pointer comparisons during stepping.
llvm-svn: 112495
complex inlined examples.
StackFrame classes don't have a "GetPC" anymore, they have "GetFrameCodeAddress()".
This is because inlined frames will have a PC value that is the same as the
concrete frame that owns the inlined frame, yet the code locations for the
frame can be different. We also need to be able to get the real PC value for
a given frame so that variables evaluate correctly. To get the actual PC
value for a frame you can use:
addr_t pc = frame->GetRegisterContext()->GetPC();
Some issues with the StackFrame stomping on its own symbol context were
resolved which were causing the information to change for a frame when the
stack ID was calculated. Also the StackFrame will now correctly store the
symbol context resolve flags for any extra bits of information that were
looked up (if you ask for a block only and you find one, you will alwasy have
the compile unit and function).
llvm-svn: 111964
which is now on by default. Frames are gotten from the unwinder as concrete
frames, then if inline frames are to be shown, extra information to track
and reconstruct these frames is cached with each Thread and exanded as needed.
I added an inline height as part of the lldb_private::StackID class, the class
that helps us uniquely identify stack frames. This allows for two frames to
shared the same call frame address, yet differ only in inline height.
Fixed setting breakpoint by address to not require addresses to resolve.
A quick example:
% cat main.cpp
% ./build/Debug/lldb test/stl/a.out
Current executable set to 'test/stl/a.out' (x86_64).
(lldb) breakpoint set --address 0x0000000100000d31
Breakpoint created: 1: address = 0x0000000100000d31, locations = 1
(lldb) r
Launching 'a.out' (x86_64)
(lldb) Process 38031 Stopped
* thread #1: tid = 0x2e03, pc = 0x0000000100000d31, where = a.out`main [inlined] std::string::_M_data() const at /usr/include/c++/4.2.1/bits/basic_string.h:280, stop reason = breakpoint 1.1, queue = com.apple.main-thread
277
278 _CharT*
279 _M_data() const
280 -> { return _M_dataplus._M_p; }
281
282 _CharT*
283 _M_data(_CharT* __p)
(lldb) bt
thread #1: tid = 0x2e03, stop reason = breakpoint 1.1, queue = com.apple.main-thread
frame #0: pc = 0x0000000100000d31, where = a.out`main [inlined] std::string::_M_data() const at /usr/include/c++/4.2.1/bits/basic_string.h:280
frame #1: pc = 0x0000000100000d31, where = a.out`main [inlined] std::string::_M_rep() const at /usr/include/c++/4.2.1/bits/basic_string.h:288
frame #2: pc = 0x0000000100000d31, where = a.out`main [inlined] std::string::size() const at /usr/include/c++/4.2.1/bits/basic_string.h:606
frame #3: pc = 0x0000000100000d31, where = a.out`main [inlined] operator<< <char, std::char_traits<char>, std::allocator<char> > at /usr/include/c++/4.2.1/bits/basic_string.h:2414
frame #4: pc = 0x0000000100000d31, where = a.out`main + 33 at /Volumes/work/gclayton/Documents/src/lldb/test/stl/main.cpp:14
frame #5: pc = 0x0000000100000d08, where = a.out`start + 52
Each inline frame contains only the variables that they contain and each inlined
stack frame is treated as a single entity.
llvm-svn: 111877
to spawn a thread for each process that is being monitored. Previously
LLDB would spawn a single thread that would wait for any child process which
isn't ok to do as a shared library (LLDB.framework on Mac OSX, or lldb.so on
linux). The old single thread used to call wait4() with a pid of -1 which
could cause it to reap child processes that it shouldn't have.
Re-wrote the way Function blocks are handles. Previously I attempted to keep
all blocks in a single memory allocation (in a std::vector). This made the
code somewhat efficient, but hard to work with. I got rid of the old BlockList
class, and went to a straight parent with children relationship. This new
approach will allow for partial parsing of the blocks within a function.
llvm-svn: 111706
should be hidden behind that, and the "GetStackFrameAtIndex" and "GetStackFrameCount" algorithms become generic. So I moved them to Thread.cpp.
llvm-svn: 110899
Arrange that this then gets properly set on attach, or when a "file" is set.
Add a completer for "process attach -n".
Caveats: there isn't currently a way to handle multiple processes with the same name. That
will have to wait on a way to pass annotations along with the completion strings.
llvm-svn: 110624
This will allow debugger plug-ins to make any instance of "lldb_private::StopInfo"
that can completely describe any stop reason. It also provides a framework for
doing intelligent things with the stop info at important times in the lifetime
of the inferior.
Examples include the signal stop info in StopInfoUnixSignal. It will check with
the process to see that the current action is for the signal. These actions
include wether to stop for the signal, wether the notify that the signal was
hit, and wether to pass the signal along to the inferior process. The
StopInfoUnixSignal class overrides the "ShouldStop()" method of StopInfo and
this allows the stop info to determine if it should stop at the signal or
continue the process.
StopInfo subclasses must override the following functions:
virtual lldb::StopReason
GetStopReason () const = 0;
virtual const char *
GetDescription () = 0;
StopInfo subclasses can override the following functions:
// If the subclass returns "false", the inferior will resume. The default
// version of this function returns "true" which means the default stop
// info will stop the process. The breakpoint subclass will check if
// the breakpoint wants us to stop by calling any installed callback on
// the breakpoint, and also checking if the breakpoint is for the current
// thread. Signals will check if they should stop based off of the
// UnixSignal settings in the process.
virtual bool
ShouldStop (Event *event_ptr);
// Sublasses can state if they want to notify the debugger when "ShouldStop"
// returns false. This would be handy for breakpoints where you want to
// log information and continue and is also used by the signal stop info
// to notify that a signal was received (after it checks with the process
// signal settings).
virtual bool
ShouldNotify (Event *event_ptr)
{
return false;
}
// Allow subclasses to do something intelligent right before we resume.
// The signal class will figure out if the signal should be propagated
// to the inferior process and pass that along to the debugger plug-ins.
virtual void
WillResume (lldb::StateType resume_state)
{
// By default, don't do anything
}
The support the Mach exceptions was moved into the lldb/source/Plugins/Process/Utility
folder and now doesn't polute the lldb_private::Thread class with platform
specific code.
llvm-svn: 110184
involved watching for the objective C built-in types in DWARF and making sure
when we convert the DWARF types into clang types that we use the appropriate
ASTContext types.
Added a way to find and dump types in lldb (something equivalent to gdb's
"ptype" command):
image lookup --type <TYPENAME>
This only works for looking up types by name and won't work with variables.
It also currently dumps out verbose internal information. I will modify it
to dump more appropriate user level info in my next submission.
Hookup up the "FindTypes()" functions in the SymbolFile and SymbolVendor so
we can lookup types by name in one or more images.
Fixed "image lookup --address <ADDRESS>" to be able to correctly show all
symbol context information, but it will only show this extra information when
the new "--verbose" flag is used.
Updated to latest LLVM to get a few needed fixes.
llvm-svn: 110089
This component is still at an early stage, but allows for simple
breakpoint/step-over operations and basic process control.
The makefiles are set up to build the plugin under Linux only.
llvm-svn: 109318
defines that are in "llvm/Support/MachO.h". This should allow ObjectFileMachO
and ObjectContainerUniversalMachO to be able to be cross compiled in Linux.
Also did some cleanup on the ASTType by renaming it to ClangASTType and
renaming the header file. Moved a lot of "AST * + opaque clang type *"
functionality from lldb_private::Type over into ClangASTType.
llvm-svn: 109046
enabled LLVM make style building and made this compile LLDB on Mac OS X. We
can now iterate on this to make the build work on both linux and macosx.
llvm-svn: 108009
Caroline Tice