For some reason we sometimes insert new instructions one instruction before
the first non-PHI when legalizing. This can result in having non-PHI
instructions before PHIs, which mean that PHI elimination doesn't catch them.
Differential Revision: https://reviews.llvm.org/D67570
llvm-svn: 371901
Because memory intrinsics are handled differently than other calls, we need to
check them for tail call eligiblity in the legalizer. This allows us to still
inline them when it's beneficial to do so, but also tail call when possible.
This adds simple tail calling support for when the intrinsic is followed by a
return.
It ports the attribute checks from `TargetLowering::isInTailCallPosition` into
a similarly-named function in LegalizerHelper.cpp. The target-specific
`isUsedByReturnOnly` hook is not ported here.
Update tailcall-mem-intrinsics.ll to show that GlobalISel can now tail call
memory intrinsics.
Update legalize-memcpy-et-al.mir to have a case where we don't tail call.
Differential Revision: https://reviews.llvm.org/D67566
llvm-svn: 371893
This was added to support fp128 on x86-64, but appears to be
unneeded now. This may be because the FR128 register class
added back then was merged with the VR128 register class later.
llvm-svn: 371815
Unlike SelectionDAG, treat this as a normally legalizable operation.
In SelectionDAG this is supposed to only ever formed if it's legal,
but I've found that to be restricting. For AMDGPU this is contextually
legal depending on whether denormal flushing is allowed in the use
function.
Technically we currently treat the denormal mode as a subtarget
feature, so custom lowering could be avoided. However I consider this
to be a defect, and this should be contextually dependent on the
controllable rounding mode of the parent function.
llvm-svn: 371800
This testcase is invalid, and caught by the verifier. For the verifier
to catch it, the live interval computation needs to complete. Remove
the assert so the verifier catches this, which is less confusing.
In this testcase there is an undefined use of a subregister, and lanes
which aren't used or defined. An equivalent testcase with the
super-register shrunk to have no untouched lanes already hit this
verifier error.
llvm-svn: 371792
This is the first sweep of generic code to add isAtomic bailouts where appropriate. The intention here is to have the switch from AtomicSDNode to LoadSDNode/StoreSDNode be close to NFC; that is, I'm not looking to allow additional optimizations at this time. That will come later. See D66309 for context.
Differential Revision: https://reviews.llvm.org/D66318
llvm-svn: 371786
This adds support for lowering sibling calls with outgoing arguments.
e.g
```
define void @foo(i32 %a)
```
Support is ported from AArch64ISelLowering's `isEligibleForTailCallOptimization`.
The only thing that is missing is a full port of
`TargetLowering::parametersInCSRMatch`. So, if we're using swiftself,
we'll never tail call.
- Rename `analyzeCallResult` to `analyzeArgInfo`, since the function is now used
for both outgoing and incoming arguments
- Teach `OutgoingArgHandler` about tail calls. Tail calls use frame indices for
stack arguments.
- Teach `lowerFormalArguments` to set the bytes in the caller's stack argument
area. This is used later to check if the tail call's parameters will fit on
the caller's stack.
- Add `areCalleeOutgoingArgsTailCallable` to perform the eligibility check on
the callee's outgoing arguments.
For testing:
- Update call-translator-tail-call to verify that we can now tail call with
outgoing arguments, use G_FRAME_INDEX for stack arguments, and respect the
size of the caller's stack
- Remove GISel-specific check lines from speculation-hardening.ll, since GISel
now tail calls like the other selectors
- Add a GISel test line to tailcall-string-rvo.ll since we can tail call in that
test now
- Add a GISel test line to tailcall_misched_graph.ll since we tail call there
now. Add specific check lines for GISel, since the debug output from the
machine-scheduler differs with GlobalISel. The dependency still holds, but
the output comes out in a different order.
Differential Revision: https://reviews.llvm.org/D67471
llvm-svn: 371780
The X86 decision assumes the compare will produce a result in an XMM
register, but that can't happen for an fp128 compare since those
go to a libcall the returns an i32. Pass the VT so X86 can check
the type.
llvm-svn: 371775
This code was changed to accomodate fp128 being softened to itself
during type legalization on x86-64. This was done in order to create
libcalls while having fp128 as a legal type. We're now doing the
libcall creation during LegalizeDAG and the type legalization changes
to enable the old behavior have been removed. So this change to
SelectionDAGBuilder is no longer needed.
llvm-svn: 371771
In MVE, as of rL371218, we are attempting to sink chains of instructions such as:
%l1 = insertelement <8 x i8> undef, i8 %l0, i32 0
%broadcast.splat26 = shufflevector <8 x i8> %l1, <8 x i8> undef, <8 x i32> zeroinitializer
In certain situations though, we can end up breaking the dominance relations of
instructions. This happens when we sink the instruction into a loop, but cannot
remove the originals. The Use is updated, which might in fact be a Use from the
second instruction to the first.
This attempts to fix that by reversing the order of instruction that are sunk,
and ensuring that we update the uses on new instructions if they have already
been sunk, not the old ones.
Differential Revision: https://reviews.llvm.org/D67366
llvm-svn: 371743
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet, JDevlieghere, alexshap, rupprecht, jhenderson
Subscribers: sdardis, nemanjai, hiraditya, kbarton, jakehehrlich, jrtc27, MaskRay, atanasyan, jsji, seiya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D67499
llvm-svn: 371742
This is the main CodeGen patch to support the arm64_32 watchOS ABI in LLVM.
FastISel is mostly disabled for now since it would generate incorrect code for
ILP32.
llvm-svn: 371722
Up to now, we've decided whether to sink address calculations using GEPs or
normal arithmetic based on the useAA hook, but there are other reasons GEPs
might be preferred. So this patch splits the two questions, with a default
implementation falling back to useAA.
llvm-svn: 371721
Current implementation of estimating divisions loses precision since it
estimates reciprocal first and does multiplication. This patch is to re-order
arithmetic operations in the last iteration in DAGCombiner to improve the
accuracy.
Reviewed By: Sanjay Patel, Jinsong Ji
Differential Revision: https://reviews.llvm.org/D66050
llvm-svn: 371713
This was previously used to turn fp128 operations into libcalls
on X86. This is now done through op legalization after r371672.
This restores much of this code to before r254653.
llvm-svn: 371709
First we were asserting that the ValNo of a VA was the wrong value. It doesn't actually
make a difference for us in CallLowering but fix that anyway to silence the assert.
The bigger issue was that after fixing the assert we were generating invalid MIR
because the merging/unmerging of values split across multiple registers wasn't
also implemented for memory locs. This happens when we run out of registers and
have to pass the split types like i128 -> i64 x 2 on the stack. This is do-able, but
for now just fall back.
llvm-svn: 371693
Emit debug entry values using standard DWARF5 opcodes when the debugger
tuning is set to lldb.
Differential Revision: https://reviews.llvm.org/D67410
llvm-svn: 371666
If there are multiple dead defs of the same virtual register, these
are required to be split into multiple virtual registers with separate
live intervals to avoid a verifier error.
llvm-svn: 371640
Summary:
This catches malformed mir files which specify alignment as log2 instead of pow2.
See https://reviews.llvm.org/D65945 for reference,
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: MatzeB, qcolombet, dschuff, arsenm, sdardis, nemanjai, jvesely, nhaehnle, hiraditya, kbarton, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, Petar.Avramovic, asbirlea, s.egerton, pzheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67433
llvm-svn: 371608
This fixes a crash in tail call translation caused by assume and lifetime_end
intrinsics.
It's possible to have instructions other than a return after a tail call which
will still have `Analysis::isInTailCallPosition` return true. (Namely,
lifetime_end and assume intrinsics.)
If we emit a tail call, we should stop translating instructions in the block.
Otherwise, we can end up emitting an extra return, or dead instructions in
general. This makes the verifier unhappy, and is generally unfortunate for
codegen.
This also removes the code from AArch64CallLowering that checks if we have a
tail call when lowering a return. This is covered by the new code now.
Also update call-translator-tail-call.ll to show that we now properly tail call
in the presence of lifetime_end and assume.
Differential Revision: https://reviews.llvm.org/D67415
llvm-svn: 371572
Add support for sibcalling calls whose calling convention differs from the
caller's.
- Port over `CCState::resultsCombatible` from CallingConvLower.cpp into
CallLowering. This is used to verify that the way the caller and callee CC
handle incoming arguments matches up.
- Add `CallLowering::analyzeCallResult`. This is basically a port of
`CCState::AnalyzeCallResult`, but using `ArgInfo` rather than `ISD::InputArg`.
- Add `AArch64CallLowering::doCallerAndCalleePassArgsTheSameWay`. This checks
that the calling conventions are compatible, and that the caller and callee
preserve the same registers.
For testing:
- Update call-translator-tail-call.ll to show that we can now handle this.
- Add a GISel line to tailcall-ccmismatch.ll to show that we will not tail call
when the regmasks don't line up.
Differential Revision: https://reviews.llvm.org/D67361
llvm-svn: 371570
This can only happen on X86 when fp128 is a legal type, but we
go through softening to generate libcalls. This causes fp128 to
be softened to fp128 instead of an integer type. This can be
removed if D67128 lands.
llvm-svn: 371493
This is the first patch in a large sequence. The eventual goal is to have unordered atomic loads and stores - and possibly ordered atomics as well - handled through the normal ISEL codepaths for loads and stores. Today, there handled w/instances of AtomicSDNodes. The result of which is that all transforms need to be duplicated to work for unordered atomics. The benefit of the current design is that it's harder to introduce a silent miscompile by adding an transform which forgets about atomicity. See the thread on llvm-dev titled "FYI: proposed changes to atomic load/store in SelectionDAG" for further context.
Note that this patch is NFC unless the experimental flag is set.
The basic strategy I plan on taking is:
introduce infrastructure and a flag for testing (this patch)
Audit uses of isVolatile, and apply isAtomic conservatively*
piecemeal conservative* update generic code and x86 backedge code in individual reviews w/tests for cases which didn't check volatile, but can be found with inspection
flip the flag at the end (with minimal diffs)
Work through todo list identified in (2) and (3) exposing performance ops
(*) The "conservative" bit here is aimed at minimizing the number of diffs involved in (4). Ideally, there'd be none. In practice, getting it down to something reviewable by a human is the actual goal. Note that there are (currently) no paths which produce LoadSDNode or StoreSDNode with atomic MMOs, so we don't need to worry about preserving any behaviour there.
We've taken a very similar strategy twice before with success - once at IR level, and once at the MI level (post ISEL).
Differential Revision: https://reviews.llvm.org/D66309
llvm-svn: 371441
If analyzeBranch fails, on some targets, the out parameters point to
some blocks in the function. But we can't use that information, so make
sure to clear it out. (In some places in IfConversion, we assume that
any block with a TrueBB is analyzable.)
The change to the testcase makes it trigger a bug on builds without this
fix: IfConvertDiamond tries to perform a followup "merge" operation,
which isn't legal, and we somehow end up with a branch to a deleted MBB.
I'm not sure how this doesn't crash the compiler.
Differential Revision: https://reviews.llvm.org/D67306
llvm-svn: 371434
Reapply with fix to reduce resources required by the compiler - use
unsigned[2] instead of std::pair. This causes clang and gcc to compile
the generated file multiple times faster, and hopefully will reduce
the resource requirements on Visual Studio also. This fix is a little
ugly but it's clearly the same issue the previous author of
DFAPacketizer faced (the previous tables use unsigned[2] rather uglily
too).
This patch allows the DFAPacketizer to be queried after a packet is formed to work out which
resources were allocated to the packetized instructions.
This is particularly important for targets that do their own bundle packing - it's not
sufficient to know simply that instructions can share a packet; which slots are used is
also required for encoding.
This extends the emitter to emit a side-table containing resource usage diffs for each
state transition. The packetizer maintains a set of all possible resource states in its
current state. After packetization is complete, all remaining resource states are
possible packetization strategies.
The sidetable is only ~500K for Hexagon, but the extra tracking is disabled by default
(most uses of the packetizer like MachinePipeliner don't care and don't need the extra
maintained state).
Differential Revision: https://reviews.llvm.org/D66936
llvm-svn: 371399
This patch allows the DFAPacketizer to be queried after a packet is formed to work out which
resources were allocated to the packetized instructions.
This is particularly important for targets that do their own bundle packing - it's not
sufficient to know simply that instructions can share a packet; which slots are used is
also required for encoding.
This extends the emitter to emit a side-table containing resource usage diffs for each
state transition. The packetizer maintains a set of all possible resource states in its
current state. After packetization is complete, all remaining resource states are
possible packetization strategies.
The sidetable is only ~500K for Hexagon, but the extra tracking is disabled by default
(most uses of the packetizer like MachinePipeliner don't care and don't need the extra
maintained state).
Differential Revision: https://reviews.llvm.org/D66936
........
Reverted as this is causing "compiler out of heap space" errors on MSVC 2017/19 NDEBUG builds
llvm-svn: 371393
Loosely based on DAGCombiner version, but this part is slightly simpler in
GlobalIsel because all address calculation is performed by G_GEP. That makes
the inc/dec distinction moot so there's just pre/post to think about.
No targets can handle it yet so testing is via a special flag that overrides
target hooks.
llvm-svn: 371384
Summary:
After tailduplication, we have redundant copies. We can remove these
copies in machine-cp if it's safe to, i.e.
```
$reg0 = OP ...
... <<< No read or clobber of $reg0 and $reg1
$reg1 = COPY $reg0 <<< $reg0 is killed
...
<RET>
```
will be transformed to
```
$reg1 = OP ...
...
<RET>
```
Differential Revision: https://reviews.llvm.org/D65267
llvm-svn: 371359
Summary:
Add zero-materializing XORs to X86's describeLoadedValue() hook in order
to produce call site values.
I have had to change the defs logic in collectCallSiteParameters() a bit
to be able to describe the XORs. The XORs implicitly define $eflags,
which would cause them to never be considered, due to a guard condition
that I->getNumDefs() is one. I have changed that condition so that we
now only consider instructions where a forwarded register overlaps with
the instruction's single explicit define. We still need to collect the implicit
defines of other forwarded registers to remove them from the work list.
I'm not sure how to move towards supporting instructions with multiple
explicit defines, cases where forwarded register are implicitly defined,
and/or cases where an instruction produces values for multiple forwarded
registers. Perhaps the describeLoadedValue() hook should take a register
argument, and we then leave it up to the hook to describe the loaded
value in that register? I have not yet encountered a situation where
that would be necessary though.
Reviewers: aprantl, vsk, djtodoro, NikolaPrica
Reviewed By: vsk
Subscribers: ychen, hiraditya, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D67225
llvm-svn: 371333
Summary:
This changes the ParamLoadedValue pair which the describeLoadedValue()
hook returns so that MachineOperand objects are returned instead of
pointers.
When describing call site values we may need to describe operands which
are not part of the instruction. One such example is zero-materializing
XORs on x86, which I have implemented support for in a child revision.
Instead of having to return a pointer to an operand stored somewhere
outside the instruction, start returning objects directly instead, as
that simplifies the code.
The MachineOperand class only holds POD members, and on x86-64 it is 32
bytes large. That combined with copy elision means that the overhead of
returning a machine operand object from the hook does not become very
large.
I benchmarked this on a 8-thread i7-8650U machine with 32 GB RAM. The
benchmark consisted of building a clang 8.0 binary configured with:
-DCMAKE_BUILD_TYPE=RelWithDebInfo \
-DLLVM_TARGETS_TO_BUILD=X86 \
-DLLVM_USE_SANITIZER=Address \
-DCMAKE_CXX_FLAGS="-Xclang -femit-debug-entry-values -stdlib=libc++"
The average wall clock time increased by 4 seconds, from 62:05 to
62:09, which is an 0.1% increase.
Reviewers: aprantl, vsk, djtodoro, NikolaPrica
Reviewed By: vsk
Subscribers: hiraditya, ychen, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D67261
llvm-svn: 371332
Summary:
Normally TargetLowering::expandFixedPointMul would handle
SMULFIXSAT with scale zero by using an SMULO to compute the
product and determine if saturation is needed (if overflow
happened). But if SMULO isn't custom/legal it falls through
and uses the same technique, using MULHS/SMUL_LOHI, as used
for non-zero scales.
Problem was that when checking for overflow (handling saturation)
when not using MULO we did not expect to find a zero scale. So
we ended up in an assertion when doing
APInt::getLowBitsSet(VTSize, Scale - 1)
This patch fixes the problem by adding a new special case for
how saturation is computed when scale is zero.
Reviewers: RKSimon, bevinh, leonardchan, spatel
Reviewed By: RKSimon
Subscribers: wuzish, nemanjai, hiraditya, MaskRay, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67071
llvm-svn: 371309
Summary:
Add an intrinsic that takes 2 unsigned integers with
the scale of them provided as the third argument and
performs fixed point multiplication on them. The
result is saturated and clamped between the largest and
smallest representable values of the first 2 operands.
This is a part of implementing fixed point arithmetic
in clang where some of the more complex operations
will be implemented as intrinsics.
Patch by: leonardchan, bjope
Reviewers: RKSimon, craig.topper, bevinh, leonardchan, lebedev.ri, spatel
Reviewed By: leonardchan
Subscribers: ychen, wuzish, nemanjai, MaskRay, jsji, jdoerfert, Ka-Ka, hiraditya, rjmccall, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57836
llvm-svn: 371308
Summary:
The value operand in DW_OP_plus_uconst/DW_OP_constu value can be
large (it uses uint64_t as representation internally in LLVM).
This means that in the uint64_t to int conversions, previously done
by DwarfExpression::addMachineRegExpression, could lose information.
Also, the negation done in "-Offset" was undefined behavior in case
Offset was exactly INT_MIN.
To avoid the above problems, we now avoid transformation like
[Reg, DW_OP_plus_uconst, Offset] --> [DW_OP_breg, Offset]
and
[Reg, DW_OP_constu, Offset, DW_OP_plus] --> [DW_OP_breg, Offset]
when Offset > INT_MAX.
And we avoid to transform
[Reg, DW_OP_constu, Offset, DW_OP_minus] --> [DW_OP_breg,-Offset]
when Offset > INT_MAX+1.
The patch also adjusts DwarfCompileUnit::constructVariableDIEImpl
to make sure that "DW_OP_constu, Offset, DW_OP_minus" is used
instead of "DW_OP_plus_uconst, Offset" when creating DIExpressions
with negative frame index offsets.
Notice that this might just be the tip of the iceberg. There
are lots of fishy handling related to these constants. I think both
DIExpression::appendOffset and DIExpression::extractIfOffset may
trigger undefined behavior for certain values.
Reviewers: sdesmalen, rnk, JDevlieghere
Reviewed By: JDevlieghere
Subscribers: jholewinski, aprantl, hiraditya, ychen, uabelho, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D67263
llvm-svn: 371304
Simon Pilgrim