For targeting pecoff, ".def foo" appears before ".short 32".
.def foo;
...
.LCPI0_0:
.short 32
foo:
CHECK-LABEL seeks not from ".short 32" but from the top of the input.
llvm-svn: 201931
shifted mask rather than masking and shifting separately.
The patch adds this transformation to the DAGCombiner:
(shl (and (setcc:i8v16 ...) N01C) N1C) -> (and (setcc:i8v16 ...) N01C<<N1C)
<rdar://problem/16054492>
Patch by Adam Nemet <anemet@apple.com>
llvm-svn: 201906
This interface allows IRObjectFile to be implemented without having dummy
methods for all section and segment related methods.
Both llvm-ar and llvm-nm are changed to use it. Unfortunately the mangler is
still not plugged in since it requires some refactoring to make a Module hold
a DataLayout.
llvm-svn: 201881
The va_start macro for AArch64 must set va_list.__stack to the address
following the last named argument on the stack, rounded up to an alignment
of 8 bytes.
llvm-svn: 201797
Summary:
This removes the need to coerce UnknownABI to the default ABI (O32 for
MIPS32, N64 for MIPS64 [*]) in both MipsSubtarget and MipsAsmParser.
Clang has been updated to disable both possible default ABI's before enabling
the ABI it intends to use.
[*] N64 being the default for MIPS64 is not actually correct.
However N32 is not fully implemented/tested yet.
Depends on: D2830
Reviewers: jacksprat, matheusalmeida
Reviewed By: matheusalmeida
Differential Revision: http://llvm-reviews.chandlerc.com/D2832
Differential Revision: http://llvm-reviews.chandlerc.com/D2846
llvm-svn: 201792
Summary:
This is consistent with the integrated assembler.
All mips64 codegen tests previously passed -mcpu. Removed -mcpu from
blez_bgez.ll and const-mult.ll to cover the default case.
Ideally, the two implementations of selectMipsCPU() will be merged but it's
proven difficult to find a home for the function that doesn't cause link errors.
For now, we'll hoist the common functionality into a function and mark it with
FIXME's.
Reviewers: jacksprat, matheusalmeida
Reviewed By: matheusalmeida
Differential Revision: http://llvm-reviews.chandlerc.com/D2830
llvm-svn: 201782
passing down an AsmPrinter instance so we could compute the size of
the block which could be target specific. All of the test cases in
the unittest don't have any target specific data so we can use a NULL
AsmPrinter there. This also depends upon block data being added as
integers.
We can now hash the entire fission-cu.ll compile unit so turn the
flag on there with the hash value.
llvm-svn: 201752
r201608 made llvm corretly handle private globals with MachO. r201622 fixed
a bug in it and r201624 and r201625 were changes for using private linkage,
assuming that llvm would do the right thing.
They all got reverted because r201608 introduced a crash in LTO. This patch
includes a fix for that. The issue was that TargetLoweringObjectFile now has
to be initialized before we can mangle names of private globals. This is
trivially true during the normal codegen pipeline (the asm printer does it),
but LTO has to do it manually.
llvm-svn: 201700
On x86, shifting a vector by a scalar is significantly cheaper than shifting a
vector by another fully general vector. Unfortunately, because SelectionDAG
operates on just one basic block at a time, the shufflevector instruction that
reveals whether the right-hand side of a shift *is* really a scalar is often
not visible to CodeGen when it's needed.
This adds another handler to CodeGenPrepare, to sink any useful shufflevector
instructions down to the basic block where they're used, predicated on a target
hook (since on other architectures, doing so will often just introduce extra
real work).
rdar://problem/16063505
llvm-svn: 201655
Load Configuration Table may contain a pointer to SEH table. This patch is to
print the offset to the table. Printing SEH table contents is a TODO.
The layout of Layout Configuration Table is described in Microsoft PE/COFF
Object File Format Spec, but the table's offset/size descriptions seems to be
totally wrong, at least in revision 8.3 of the spec. I believe the table in
this patch is the correct one.
llvm-svn: 201638
This enhances the macro parser to parse and handle parameter qualifications,
which is needed to support required formal parameters in macro definitions. A
required parameter may not be defaulted (though providing a default value is
accepted with a warning). This improves GAS compatibility.
Partially addresses PR9248.
llvm-svn: 201630
When outputting an object we check its section to find its name, but when
looking for the section with -ffunction-section we look for the symbol name.
Break the loop by requesting a name with the private prefix when constructing
the section name. This matches the behavior before r201608.
llvm-svn: 201622
The IR
@foo = private constant i32 42
is valid, but before this patch we would produce an invalid MachO from it. It
was invalid because it would use an L label in a section where the liker needs
the labels in order to atomize it.
One way of fixing it would be to just reject this IR in the backend, but that
would not be very front end friendly.
What this patch does is use an 'l' prefix in sections that we know the linker
requires symbols for atomizing them. This allows frontends to just use
private and not worry about which sections they go to or how the linker handles
them.
One small issue with this strategy is that now a symbol name depends on the
section, which is not available before codegen. This is not a problem in
practice. The reason is that it only happens with private linkage, which will
be ignored by the non codegen users (llvm-nm and llvm-ar).
llvm-svn: 201608
In gcov, the -o flag can accept either a directory or a file name.
When given a directory, the gcda and gcno files are expected to be in
that directory. When given a file, the gcda and gcno files are
expected to be named based on the stem of that file. Non-existent
paths are treated as files.
This implements compatible behaviour.
llvm-svn: 201555
Introducing llvm-profdata, a tool for merging profile data generated by
PGO instrumentation in clang.
- The name indicates a file extension of <name>.profdata. Eventually
profile data output by clang should be changed to that extension.
- llvm-profdata merges two profiles. However, the name is more general,
since it will likely pick up more tasks (such as summarizing a single
profile).
- llvm-profdata parses the current text-based format, but will be
updated once we settle on a binary format.
<rdar://problem/15949645>
llvm-svn: 201535
ldrd r6, r7 [r2, #15]
simply gives an error and does not triggers an assertion.
As Jim points out, the diagnostic is really strange here,
but fixing that would be more complicated. The missing
comma results in the parser expecting a construct like r2[2],
which is the vector index thing the error message is talking
about. That's not what the user intended, though, and there's
nothing else in the instruction that looks at all like a vector.
Yet more fallout from not having a real parser here and trying
to do context-free generic matching for addressing modes.
rdar://15097243
llvm-svn: 201531
This is implemented by handling assignments to the '.' pseudo symbol
as ".org" directives.
Differential Revision: http://llvm-reviews.chandlerc.com/D2625
llvm-svn: 201530
Until this point only macro definition with named parameters were parsed but the
names were ignored. This adds support for using that information for named
parameter instantiation.
In order to support the full semantics of the keyword arguments, the arguments
are no longer lazily initialised since the keyword arguments can be specified
out of order and partially if they are defaulted. Prepopulate the arguments
with the default value for any defaulted parameters, and then parse the
specified arguments.
This simplies some of the handling of the arguments in the inner loop since
empty arguments simply increment the parameter index and move on.
Note that keyword and positional arguments cannot be mixed.
llvm-svn: 201499
NaCl's ARM ABI uses 16 byte stack alignment, so set that in
ARMSubtarget.cpp.
Using 16 byte alignment exposes an issue in code generation in which a
varargs function leaves a 4 byte gap between the values of r1-r3 saved
to the stack and the following arguments that were passed on the
stack. (Previously, this code only needed to support 4 byte and 8
byte alignment.)
With this issue, llc generated:
varargs_func:
sub sp, sp, #16
push {lr}
sub sp, sp, #12
add r0, sp, #16 // Should be 20
stm r0, {r1, r2, r3}
ldr r0, .LCPI0_0 // Address of va_list
add r1, sp, #16
str r1, [r0]
bl external_func
Fix the bug by checking for "Align > 4". Also simplify the code by
using OffsetToAlignment(), and update comments.
Differential Revision: http://llvm-reviews.chandlerc.com/D2677
llvm-svn: 201497
During LSR of one loop we can run into a situation where we have to expand the
start of a recurrence of a loop induction variable in this loop. This start
value is a value derived of the induction variable of a preceeding loop. SCEV
has cannonicalized this value to a different recurrence than the recurrence of
the preceeding loop's induction variable (the type and/or step direction) has
changed). When we come to instantiate this SCEV we created a second induction
variable in this preceeding loop. This patch tries to base such derived
induction variables of the preceeding loop's induction variable.
This helps twolf on arm and seems to help scimark2 on x86.
Reapply with a fix for the case of a value derived from a pointer.
radar://15970709
llvm-svn: 201496
alongside DIEBlock and replace uses accordingly. Use DW_FORM_exprloc
in DWARF4 and later code. Update testcases.
Adding a DIELoc instead of using extra forms inside DIEBlock so
that we can keep location expressions separate from other uses. No
direct use at the moment, however, it's not a lot of code and
using a separately named class keeps it somewhat more obvious
what's going on in various locations.
llvm-svn: 201481
The Linux kernel defines empty macros for compatibility with ARM UAL syntax.
The comma after the name is optional, and if present can be safely lexed. This
improves compatibility with the GNU assembler.
llvm-svn: 201474
This adds a partial implementation of the .arch_extension directive to the
integrated ARM assembler. There are a number of limitations to this
implementation arising from the target backend support rather than the
implementation itself. Namely, iWMMXT (v1 and v2), Maverick, and XScale support
is not present in the ARM backend. Currently, there is no check for A-class
only (needed for virt), and no ARMv6k detection (needed for os and sec). The
remainder of the extensions are fully supported.
llvm-svn: 201471
This broke in r185459 while TLS support was being generalized to handle
non-symbol TLS representations.
I thought about/tried having an enum rather than a bool to track the
TLS-ness of the address table entry, but namespaces and naming seemed
more hassle than it was worth for only one caller that needed to specify
this.
llvm-svn: 201469
During LSR of one loop we can run into a situation where we have to expand the
start of a recurrence of a loop induction variable in this loop. This start
value is a value derived of the induction variable of a preceeding loop. SCEV
has cannonicalized this value to a different recurrence than the recurrence of
the preceeding loop's induction variable (the type and/or step direction) has
changed). When we come to instantiate this SCEV we created a second induction
variable in this preceeding loop. This patch tries to base such derived
induction variables of the preceeding loop's induction variable.
This helps twolf on arm and seems to help scimark2 on x86.
radar://15970709
llvm-svn: 201465
Type units will share the statement list of their defining compile unit.
This is a tradeoff that reduces .o debug info size at the cost of some
linked debug info size (since the contents of those string tables won't
be deduplicated along with the type unit) which seems right for now.
llvm-svn: 201445
Recommitting r201380 (reverted in r201389)
Recommitting r201351 and r201355 (reverted in r201351 and r201355)
We weren't emitting the an empty (header only) line table when the line
table was empty - this made the DWARF invalid (the compile unit would
point to the zero-size debug_lines section where there should've been an
empty line table but there was nothing at all). Fix that, and as a
consequence this works around/addresses PR18809.
Also, we emit a non-empty line table to workaround a darwin linker bug,
so XFAILing on darwin too.
Also, mark the test as 'REQUIRES: object-emission' because it does.
llvm-svn: 201429
Summary:
This adds support for emitting DWARF path discriminator values in
the object streamer. It also changes the DWARF dumper to show
discriminator values in the line table output.
Reviewers: echristo
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2794
llvm-svn: 201427
1) Fix a specific bug when certain conversion functions are called in a program compiled as mips16 with hard float and
the program is linked as c++. There are two libraries that are reversed in the link order with gcc/g++ and clang/clang++ for
mips16 in this case and the proper stubs will then not be called. These stubs are normally handled in the Mips16HardFloat pass
but in this case we don't know at that time that we need to generate the stubs. This must all be handled later in code generation
and we have moved this functionality to MipsAsmPrinter. When linked as C (gcc or clang) the proper stubs are linked in from libc.
2) Set up the infrastructure to handle 90% of what is in the Mips16HardFloat pass in this new area of MipsAsmPrinter. This is a more
logical place to handle this and we have known for some time that we needed to move the code later and not implement it using
inline asm as we do now but it was not clear exactly where to do this and what mechanism should be used. Now it's clear to us
how to do this and this patch contains the infrastructure to move most of this to MipsAsmPrinter but the actual moving will be done
in a follow on patch. The same infrastructure is used to fix this current bug as described in #1. This change was requested by the list
during the original putback of the Mips16HardFloat pass but was not practical for us do at that time.
llvm-svn: 201426
As v1i1 is illegal, the type legalizer tries to scalarize such node. But if the type operands of SETCC is legal, the scalarization algorithm will cause an assertion failure.
llvm-svn: 201381
Recommitting r201351 and r201355 (reverted in r201351 and r201355)
We weren't emitting the an empty (header only) line table when the line
table was empty - this made the DWARF invalid (the compile unit would
point to the zero-size debug_lines section where there should've been an
empty line table but there was nothing at all). Fix that, and as a
consequence this works around/addresses PR18809.
llvm-svn: 201380
Summary:
There should be a space before each of these two keywords to avoid
generating invalid assembly files.
NOTE: I could not find an obvious maintainers in CODE_OWNERS.TXT, but
this seems related to debug info.
Reviewers: echristo
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2791
llvm-svn: 201359
Summary:
AsmPrinter::EmitInlineAsm() will no longer use the EmitRawText() call for
targets with mature MC support. Such targets will always parse the inline
assembly (even when emitting assembly). Targets without mature MC support
continue to use EmitRawText() for assembly output.
The hasRawTextSupport() check in AsmPrinter::EmitInlineAsm() has been replaced
with MCAsmInfo::UseIntegratedAs which when true, causes the integrated assembler
to parse inline assembly (even when emitting assembly output). UseIntegratedAs
is set to true for targets that consider any failure to parse valid assembly
to be a bug. Target specific subclasses generally enable the integrated
assembler in their constructor. The default value can be overridden with
-no-integrated-as.
All tests that rely on inline assembly supporting invalid assembly (for example,
those that use mnemonics such as 'foo' or 'hello world') have been updated to
disable the integrated assembler.
Changes since review (and last commit attempt):
- Fixed test failures that were missed due to configuration of local build.
(fixes crash.ll and a couple others).
- Fixed tests that happened to pass because the local build was on X86
(should fix 2007-12-17-InvokeAsm.ll)
- mature-mc-support.ll's should no longer require all targets to be compiled.
(should fix ARM and PPC buildbots)
- Object output (-filetype=obj and similar) now forces the integrated assembler
to be enabled regardless of default setting or -no-integrated-as.
(should fix SystemZ buildbots)
Reviewers: rafael
Reviewed By: rafael
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2686
llvm-svn: 201333
This fix checks the original LLVM IR node to identify opaque constants by
looking for the bitcast-constant pattern. Originally we looked at the generated
SDNode, but this might lead to incorrect results. The SDNode could have been
generated by an constant expression that was folded to a constant.
This fixes <rdar://problem/16050719>
llvm-svn: 201291
As defined in LangRef, aliases do not have sections. However, LLVM's
GlobalAlias class inherits from GlobalValue, which means we can read and
set its section. We should probably ban that as a separate change,
since it doesn't make much sense for an alias to have a section that
differs from its aliasee.
Fixes PR18757, where the section was being lost on the global in code
from Clang like:
extern "C" {
__attribute__((used, section("CUSTOM"))) static int in_custom_section;
}
Reviewers: rafael.espindola
Differential Revision: http://llvm-reviews.chandlerc.com/D2758
llvm-svn: 201286
logical operations on the i1's driving them. This is a bad idea for every
target I can think of (confirmed with micro tests on all of: x86-64, ARM,
AArch64, Mips, and PowerPC) because it forces the i1 to be materialized into
a general purpose register, whereas consuming it directly into a select generally
allows it to exist only transiently in a predicate or flags register.
Chandler ran a set of performance tests with this change, and reported no
measurable change on x86-64.
llvm-svn: 201275
'OK_NonUniformConstValue' to identify operands which are constants but
not constant splats.
The cost model now allows returning 'OK_NonUniformConstValue'
for non splat operands that are instances of ConstantVector or
ConstantDataVector.
With this change, targets are now able to compute different costs
for instructions with non-uniform constant operands.
For example, On X86 the cost of a vector shift may vary depending on whether
the second operand is a uniform or non-uniform constant.
This patch applies the following changes:
- The cost model computation now takes into account non-uniform constants;
- The cost of vector shift instructions has been improved in
X86TargetTransformInfo analysis pass;
- BBVectorize, SLPVectorizer and LoopVectorize now know how to distinguish
between non-uniform and uniform constant operands.
Added a new test to verify that the output of opt
'-cost-model -analyze' is valid in the following configurations: SSE2,
SSE4.1, AVX, AVX2.
llvm-svn: 201272
Instead of expanding a packed shift into a sequence of scalar shifts,
the backend now tries (when possible) to convert the vector shift into a
vector multiply.
Before this change, a shift of a MVT::v8i16 vector by a
build_vector of constants was always scalarized into a long sequence of "vector
extracts + scalar shifts + vector insert".
With this change, if there is SSE2 support, we emit a single vector multiply.
This change also affects SSE4.1, AVX, AVX2 shifts:
- A shift of a MVT::v4i32 vector by a build_vector of non uniform constants
is now lowered when possible into a single SSE4.1 vector multiply.
- Packed v16i16 shift left by constant build_vector are now expanded when
possible into a single AVX2 vpmullw.
This change also improves the lowering of AVX512f vector shifts.
Added test CodeGen/X86/vec_shift6.ll with some code examples that are affected
by this change.
llvm-svn: 201271
Summary:
AsmPrinter::EmitInlineAsm() will no longer use the EmitRawText() call for targets with mature MC support. Such targets will always parse the inline assembly (even when emitting assembly). Targets without mature MC support continue to use EmitRawText() for assembly output.
The hasRawTextSupport() check in AsmPrinter::EmitInlineAsm() has been replaced with MCAsmInfo::UseIntegratedAs which when true, causes the integrated assembler to parse inline assembly (even when emitting assembly output). UseIntegratedAs is set to true for targets that consider any failure to parse valid assembly to be a bug. Target specific subclasses generally enable the integrated assembler in their constructor. The default value can be overridden with -no-integrated-as.
All tests that rely on inline assembly supporting invalid assembly (for example, those that use mnemonics such as 'foo' or 'hello world') have been updated to disable the integrated assembler.
Reviewers: rafael
Reviewed By: rafael
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2686
llvm-svn: 201237
There's still one piece missing here, which is adding the
DW_AT_stmt_list to the type unit that refer's to the compile unit's line
table. Working on that.
llvm-svn: 201198
* CPRCs may be allocated to co-processor registers or the stack – they may never be allocated to core registers
* When a CPRC is allocated to the stack, all other VFP registers should be marked as unavailable
The difference is only noticeable in rare cases where there are a large number of floating point arguments (e.g.
7 doubles + additional float, double arguments). Although it's probably still better to avoid vmov as it can cause
stalls in some older ARM cores. The other, more subtle benefit, is to minimize difference between the various
calling conventions.
rdar://16039676
llvm-svn: 201193
Debug info: Emit values in subregisters that do not have a separate
DWARF register number by emitting a super-register + DW_OP_bit_piece.
This is necessary because on x86_64, there are no DWARF register numbers
for i386-style subregisters.
Fixes a bunch of FIXMEs.
rdar://problem/16015314
llvm-svn: 201190
This comes up in empty files or files containing #file directives that
never reference the actual source file name. Came up in a small test of
line tables I was playing with.
llvm-svn: 201187
These tests were unnecessarily sensitive to the presence and ordering of
elements in the line table file_names list which will break on a future
change I'm working on.
llvm-svn: 201185
DWARF register number by emitting a super-register + DW_OP_bit_piece.
This is necessary because on x86_64, there are no DWARF register numbers
for i386-style subregisters.
Fixes a bunch of FIXMEs.
rdar://problem/16015314
llvm-svn: 201180
BUILD_VECTOR nodes, e.g.:
(concat_vectors (BUILD_VECTOR a1, a2, a3, a4), (BUILD_VECTOR b1, b2, b3, b4))
->
(BUILD_VECTOR a1, a2, a3, a4, b1, b2, b3, b4)
This fixes an issue with AVX, where a sequence was not recognized as a 256-bit
vbroadcast due to the concat_vectors.
llvm-svn: 201158
Fixes PR18753 and PR18782.
This is necessary for LICM to preserve LCSSA correctly and efficiently.
There is still some active discussion about whether we should be using
LCSSA, but we can't just immediately stop using it and we *need* LICM to
preserve it while we are using it. We can restore the old SSAUpdater
driven code if and when there is a serious effort to remove the reliance
on LCSSA from all of the loop passes.
However, this also serves as a great example of why LCSSA is very nice
to have. This change significantly simplifies the process of sinking
instructions for LICM, and makes it quite a bit less expensive.
It wouldn't even be as complex as it is except that I had to start the
process of removing the big recursive LCSSA formation hammer in order to
switch even this much of the re-forming code to asserting that LCSSA was
preserved. I'll fully remove that next just to tidy things up until the
LCSSA debate settles one way or the other.
llvm-svn: 201148
Xcore target ABI requires const data that is externally visible
to be handled differently if it has C-language linkage rather than
C++ language linkage.
Clang now emits ".cp.rodata" section information.
All other externally visible constant data will be placed in the DP section.
llvm-svn: 201144
profitability check due to some other checks in the addressing
mode matcher. I.e., test case for commit r201121.
<rdar://problem/16020230>
llvm-svn: 201132
DS instructions that access local memory can only uses addresses that
are less than or equal to the value of M0. When M0 is uninitialized,
then we experience undefined behavior.
This patch also changes the behavior to emit S_WQM_B64 on pixel shaders
no matter what kind of DS instruction is used.
llvm-svn: 201097
Similarly to the vshrn instructions, these are simple zext/sext + trunc
operations. Using normal LLVM IR should allow for better code, and more sharing
with the AArch64 backend.
llvm-svn: 201093
For A- and R-class processors, r12 is not normally callee-saved, but is for
interrupt handlers. See AAPCS, 5.3.1.1, "Use of IP by the linker".
llvm-svn: 201089
vshrn is just the combination of a right shift and a truncate (and the limits
on the immediate value actually mean the signedness of the shift doesn't
matter). Using that representation allows us to get rid of an ARM-specific
intrinsic, share more code with AArch64 and hopefully get better code out of
the mid-end optimisers.
llvm-svn: 201085
Original commits messages:
Add MRMXr/MRMXm form to X86 for use by instructions which treat the 'reg' field of modrm byte as a don't care value. Will allow for simplification of disassembler code.
Simplify a bunch of code by removing the need for the x86 disassembler table builder to know about extended opcodes. The modrm forms are sufficient to convey the information.
llvm-svn: 201065
This makes the tests more readable by using the -arm-attributes decoding support
in llvm-readobj since that is now available. Change the invocation commands to
be similar to other test and use a more precise triple (the tests only require
ARM EABI support).
llvm-svn: 201029
Before conditional store vectorization/unrolling we had only one
vectorized/unrolled basic block. After adding support for conditional store
vectorization this will not only be one block but multiple basic blocks. The
last block would have the back-edge. I updated the code to use a vector of basic
blocks instead of a single basic block and fixed the users to use the last entry
in this vector. But, I forgot to add the basic blocks to this vector!
Fixes PR18724.
llvm-svn: 201028
The bitcast instruction during constant materialization was not placed correcly
in the presence of phi nodes. This commit fixes the insertion point to be in the
idom instead.
This fixes PR18768
llvm-svn: 201009
According to the AAPCS, when a CPRC is allocated to the stack, all other
VFP registers should be marked as unavailable.
I have also modified the rules for allocating non-CPRCs to the stack, to make
it more explicit that all GPRs must be made unavailable. I cannot think of a
case where the old version would produce incorrect answers, so there is no test
for this.
llvm-svn: 200970
Generalize the AArch64 .td nodes for AssertZext and AssertSext. Use
them to match the relevant pextr store instructions.
The test widen_load-2.ll requires a slight change because with the
stores gone, the remaining instructions are scheduled in a different
order.
Add test cases for SSE4 and AVX variants.
Resolves rdar://13414672.
Patch by Adam Nemet <anemet@apple.com>.
llvm-svn: 200957
mode.
Basically the idea is to transform code like this:
%idx = add nsw i32 %a, 1
%sextidx = sext i32 %idx to i64
%gep = gep i8* %myArray, i64 %sextidx
load i8* %gep
Into:
%sexta = sext i32 %a to i64
%idx = add nsw i64 %sexta, 1
%gep = gep i8* %myArray, i64 %idx
load i8* %gep
That way the computation can be folded into the addressing mode.
This transformation is done as part of the addressing mode matcher.
If the matching fails (not profitable, addressing mode not legal, etc.), the
matcher will revert the related promotions.
<rdar://problem/15519855>
llvm-svn: 200947
There was a problem with the old pattern, so we were copying some
larger immediates into registers when we could have been encoding
them in the instruction.
llvm-svn: 200932
The most important part of this is probably adding any cost at all for
operations like zext <8 x i8> to <8 x i32>. Before they were being
recorded as extremely costly (24, I believe) which made LLVM fall back
on a 4-wide vectorisation of a loop.
It also rebalances the values for sext, zext and trunc. Lacking any
other sane metric that might work across CPU microarchitectures I went
for instructions. This seems to be in reasonable accord with the rest
of the table (sitofp, ...) though no doubt at least one value is
sub-optimal for some bizarre reason.
Finally, separate AVX and AVX2 values are provided where appropriate.
The CodeGen is quite different in many cases.
rdar://problem/15981990
llvm-svn: 200928
The primary motivation for this pass is to separate the call graph
analysis used by the new pass manager's CGSCC pass management from the
existing call graph analysis pass. That analysis pass is (somewhat
unfortunately) over-constrained by the existing CallGraphSCCPassManager
requirements. Those requirements make it *really* hard to cleanly layer
the needed functionality for the new pass manager on top of the existing
analysis.
However, there are also a bunch of things that the pass manager would
specifically benefit from doing differently from the existing call graph
analysis, and this new implementation tries to address several of them:
- Be lazy about scanning function definitions. The existing pass eagerly
scans the entire module to build the initial graph. This new pass is
significantly more lazy, and I plan to push this even further to
maximize locality during CGSCC walks.
- Don't use a single synthetic node to partition functions with an
indirect call from functions whose address is taken. This node creates
a huge choke-point which would preclude good parallelization across
the fanout of the SCC graph when we got to the point of looking at
such changes to LLVM.
- Use a memory dense and lightweight representation of the call graph
rather than value handles and tracking call instructions. This will
require explicit update calls instead of some updates working
transparently, but should end up being significantly more efficient.
The explicit update calls ended up being needed in many cases for the
existing call graph so we don't really lose anything.
- Doesn't explicitly model SCCs and thus doesn't provide an "identity"
for an SCC which is stable across updates. This is essential for the
new pass manager to work correctly.
- Only form the graph necessary for traversing all of the functions in
an SCC friendly order. This is a much simpler graph structure and
should be more memory dense. It does limit the ways in which it is
appropriate to use this analysis. I wish I had a better name than
"call graph". I've commented extensively this aspect.
This is still very much a WIP, in fact it is really just the initial
bits. But it is about the fourth version of the initial bits that I've
implemented with each of the others running into really frustrating
problms. This looks like it will actually work and I'd like to split the
actual complexity across commits for the sake of my reviewers. =] The
rest of the implementation along with lots of wiring will follow
somewhat more rapidly now that there is a good path forward.
Naturally, this doesn't impact any of the existing optimizer. This code
is specific to the new pass manager.
A bunch of thanks are deserved for the various folks that have helped
with the design of this, especially Nick Lewycky who actually sat with
me to go through the fundamentals of the final version here.
llvm-svn: 200903
During DAGCombine visitShiftByConstant assumes that certain binary operations
with only constant operands can always be folded successfully. This is no longer
true when the constant is opaque. This commit fixes visitShiftByConstant by not
performing the optimization for opaque constants. Otherwise we would end up in
an infinite DAGCombine loop.
llvm-svn: 200900
225 is the default value of inline-threshold. This change will make sure
we have the same inlining behavior as prior to r200886.
As Chandler points out, even though we don't have code in our testing
suite that uses cold attribute, there are larger applications that do
use cold attribute.
r200886 + this commit intend to keep the same behavior as prior to r200886.
We can later on tune the inlinecold-threshold.
The main purpose of r200886 is to help performance of instrumentation based
PGO before we actually hook up inliner with analysis passes such as BPI and BFI.
For instrumentation based PGO, we try to increase inlining of hot functions and
reduce inlining of cold functions by setting inlinecold-threshold.
Another option suggested by Chandler is to use a boolean flag that controls
if we should use OptSizeThreshold for cold functions. The default value
of the boolean flag should not change the current behavior. But it gives us
less freedom in controlling inlining of cold functions.
llvm-svn: 200898
Ideally only those transform passes that run at -O0 remain enabled,
in reality we get as close as we reasonably can.
Passes are responsible for disabling themselves, it's not the job of
the pass manager to do it for them.
llvm-svn: 200892
Added command line option inlinecold-threshold to set threshold for inlining
functions with cold attribute. Listen to the cold attribute when it would
decrease the inline threshold.
llvm-svn: 200886
find a register.
The idea is to choose a color for the variable that cannot be allocated and
recolor its interferences around. Unlike the current register allocation scheme,
it is allowed to change the color of an already assigned (but maybe not
splittable or spillable) live interval while propagating this change to its
neighbors.
In other word, there are two things that may help finding an available color:
- Already assigned variables (RS_Done) can be recolored to different color.
- The recoloring allows to catch solutions that needs to touch more that just
the neighbors of the current allocated variable.
E.g.,
vA can use {R1, R2 }
vB can use { R2, R3}
vC can use {R1 }
Where vA, vB, and vC cannot be split anymore (they are reloads for instance) and
they all interfere.
vA is assigned R1
vB is assigned R2
vC tries to evict vA but vA is already done.
=> Regular register allocation heuristic fails.
Last chance recoloring kicks in:
vC does as if vA was evicted => vC uses R1.
vC is marked as fixed.
vA needs to find a color.
None are available.
vA cannot evict vC: vC is a fixed virtual register now.
vA does as if vB was evicted => vA uses R2.
vB needs to find a color.
R3 is available.
Recoloring => vC = R1, vA = R2, vB = R3.
<rdar://problem/15947839>
llvm-svn: 200883
This patch adds NaCl target for Mips. It also forbids indexed loads and
stores if the target is NaCl.
Patch by Sasa Stankovic.
Differential Revision: http://llvm-reviews.chandlerc.com/D2690
llvm-svn: 200855
In Thumb1 mode, bl instruction might be selected for branches between
basic blocks in the function if the offset is greater than 2KB.
However, this might cause SEGV because the destination symbol
is not marked as thumb function and the execution mode will be reset
to ARM mode.
Since we are sure that these symbols are in the same data fragment, we
can simply resolve these local symbols, and don't emit any relocation
information for this bl instruction.
llvm-svn: 200842
Patch implements %hi(sym1 - sym2) and %lo(sym1 - sym2) expressions for MIPS
by creating target expression class MipsMCExpr.
Patch by Sasa Stankovic.
Differential Revision: http://llvm-reviews.chandlerc.com/D2592
llvm-svn: 200783
This patch fixes the ldr-pseudo implementation to work when used in
inline assembly. The fix is to move arm assembler constant pools
from the ARMAsmParser class to the ARMTargetStreamer class.
Previously we kept the assembler generated constant pools in the
ARMAsmParser object. This does not work for inline assembly because
a new parser object is created for each blob of inline assembly.
This patch moves the constant pools to the ARMTargetStreamer class
so that the constant pool will remain alive for the entire code
generation process.
An ARMTargetStreamer class is now required for the arm backend.
There was no existing implementation for MachO, only Asm and ELF.
Instead of creating an empty MachO subclass, we decided to make the
ARMTargetStreamer a non-abstract class and provide default
(llvm_unreachable) implementations for the non constant-pool related
methods.
Differential Revision: http://llvm-reviews.chandlerc.com/D2638
llvm-svn: 200777
The OpenCL specs say: "The vector versions of the math functions operate
component-wise. The description is per-component."
Patch by: Jan Vesely
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
llvm-svn: 200773
There was an extremely confusing proliferation of LLVM intrinsics to implement
the vacge & vacgt instructions. This combines them all into two polymorphic
intrinsics, shared across both backends.
llvm-svn: 200768
Until now, when a path in a gcno file included a directory, we would
emit our .gcov file in that directory, whereas gcov always emits the
file in the current directory. In doing so, this implements gcov's
strange name-mangling -p flag, which is needed to avoid clobbering
files when two with the same name exist in different directories.
The path mangling is a bit ugly and only handles unix-like paths, but
it's simple, and it doesn't make any guesses as to how it should
behave outside of what gcov documents. If we decide this should be
cross platform later, we can consider the compatibility implications
then.
llvm-svn: 200754
NAKAMURA Takumi