Add printf-style precision specifier to pad numbers to a given number of
digits when matching them if the value is smaller than the given
precision. This works on both empty numeric expression (e.g. variable
definition from input) and when matching a numeric expression. The
syntax is as follows:
[[#%.<precision><format specifier>, ...]
where <format specifier> is optional and ... can be a variable
definition or not with an empty expression or not. In the absence of a
precision specifier, a variable definition will accept leading zeros.
Reviewed By: jhenderson, grimar
Differential Revision: https://reviews.llvm.org/D81667
When diffing disassembly dump of two binaries, I see lots of noises from mismatched jump target addresses and global data references, which unnecessarily causes diffs on every function, making it impractical. I'm trying to symbolize the raw binary addresses to minimize the diff noise.
In this change, a local branch target is modeled as a label and the branch target operand will simply be printed as a label. Local labels are collected by a separate pre-decoding pass beforehand. A global data memory operand will be printed as a global symbol instead of the raw data address. Unfortunately, due to the way the disassembler is set up and to be less intrusive, a global symbol is always printed as the last operand of a memory access instruction. This is less than ideal but is probably acceptable from checking code quality point of view since on most targets an instruction can have at most one memory operand.
So far only the X86 disassemblers are supported.
Test Plan:
llvm-objdump -d --x86-asm-syntax=intel --no-show-raw-insn --no-leading-addr :
```
Disassembly of section .text:
<_start>:
push rax
mov dword ptr [rsp + 4], 0
mov dword ptr [rsp], 0
mov eax, dword ptr [rsp]
cmp eax, dword ptr [rip + 4112] # 202182 <g>
jge 0x20117e <_start+0x25>
call 0x201158 <foo>
inc dword ptr [rsp]
jmp 0x201169 <_start+0x10>
xor eax, eax
pop rcx
ret
```
llvm-objdump -d **--symbolize-operands** --x86-asm-syntax=intel --no-show-raw-insn --no-leading-addr :
```
Disassembly of section .text:
<_start>:
push rax
mov dword ptr [rsp + 4], 0
mov dword ptr [rsp], 0
<L1>:
mov eax, dword ptr [rsp]
cmp eax, dword ptr <g>
jge <L0>
call <foo>
inc dword ptr [rsp]
jmp <L1>
<L0>:
xor eax, eax
pop rcx
ret
```
Note that the jump instructions like `jge 0x20117e <_start+0x25>` without this work is printed as a real target address and an offset from the leading symbol. With a change in the optimizer that adds/deletes an instruction, the address and offset may shift for targets placed after the instruction. This will be a problem when diffing the disassembly from two optimizers where there are unnecessary false positives due to such branch target address changes. With `--symbolize-operand`, a label is printed for a branch target instead to reduce the false positives. Similarly, the disassemble of PC-relative global variable references is also prone to instruction insertion/deletion.
Reviewed By: jhenderson, MaskRay
Differential Revision: https://reviews.llvm.org/D84191
Add support for passing in libraries via `-l` and `-L` options to
`llvm-libtool-darwin`.
Reviewed by jhenderson, smeenai
Differential Revision: https://reviews.llvm.org/D85540
Add support for -arch_only option for llvm-libtool-darwin. This diff
also adds support for accepting universal files as input and flattening
them to create the required static library. Supports input universal
files contaning both Mach-O object files or archives.
Differences from cctools' libtool:
- `-arch_only` can be specified multiple times
- archives containing universal files are considered invalid (libtool
allows such archives)
Reviewed by jhenderson, smeenai
Differential Revision: https://reviews.llvm.org/D84770
Add documentation for the remaining options of
`llvm-install-name-tool`.
Reviewed by jhenderson, smeenai
Differential Revision: https://reviews.llvm.org/D85655
The switch from llvm::cl to OptTable (D83530) dropped --version, which
is needed by some users.
This patch also adds a -v alias, which is available in GNU addr2line.
The version dumping is similar to llvm-objcopy --version (exotic):
```
llvm-symbolizer
LLVM (http://llvm.org/):
LLVM version 12.0.0git
Optimized build with assertions.
Default target: x86_64-unknown-linux-gnu
Host CPU: skylake-avx512
```
Reviewed By: dyung, jhenderson
Differential Revision: https://reviews.llvm.org/D85624
Add support for `-D` and `-U` options for llvm-libtool-darwin. `-D`
allows for using zero for timestamps and UIDs/GIDs. `-U` allows for
using actual timestamps and UIDs/GIDs.
Reviewed by jhenderson, smeenai
Differential Revision: https://reviews.llvm.org/D84209
Add support for `-filelist` option for llvm-libtool-darwin. `-filelist`
option allows for passing in a file containing a list of filenames.
Reviewed by jhenderson, smeenai
Differential Revision: https://reviews.llvm.org/D84206
This diff adds documentation for `allow-empty` flag under FileCheck
docs.
Reviewed by jhenderson, smeenai, thopre
Differential Revision: https://reviews.llvm.org/D83682
This came up during the review for D67656. It's nice but also subtle, so documenting it as an idiom will make tests easier to understand.
Reviewed By: probinson
Differential Revision: https://reviews.llvm.org/D68061
for the advantage outlined by D83639 ([OptTable] Support grouped short options)
Some behavior changes:
* -i={0,false} is removed. Use --no-inlines instead.
* --demangle={0,false} is removed. Use --no-demangle instead
* -untag-addresses={0,false} is removed. Use --no-untag-addresses instead
Added a higher level API OptTable::parseArgs which handles optional
initial options populated from an environment variable, expands response
files recursively, and parses options.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D83530
PGO profile is usually more precise than sample profile. However, PGO profile
needs to be collected from loadtest and loadtest may not be representative
enough to the production workload. Sample profile collected from production
can be used as a supplement -- for functions cold in loadtest but warm/hot
in production, we can scale up the related function in PGO profile if the
function is warm or hot in sample profile.
The implementation contains changes in compiler side and llvm-profdata side.
Given an instr profile and a sample profile, for a function cold in PGO
profile but warm/hot in sample profile, llvm-profdata will either mark
all the counters in the profile to be -1 or scale up the max count in the
function to be above hot threshold, depending on the zero counter ratio in
the profile. The assumption is if there are too many counters being zero
in the function profile, the profile is more likely to cause harm than good,
then llvm-profdata will mark all the counters to be -1 indicating the
function is hot but the profile is unaccountable. In compiler side, if a
function profile with all -1 counters is seen, the function entry count will
be set to be above hot threshold but its internal profile will be dropped.
In the long run, it may be useful to let compiler support using PGO profile
and sample profile at the same time, but that requires more careful design
and more substantial changes to make two profiles work seamlessly. The patch
here serves as a simple intermediate solution.
Differential Revision: https://reviews.llvm.org/D81981
Starting with Skylake, the LBR contains the precise number of cycles between the two
consecutive branches.
Making use of this will hopefully make the measurements more precise than the
existing methods of using RDTSC.
Differential Revision: https://reviews.llvm.org/D77422
New change: check for existence of field `cycles` in perf_branch_entry before enabling this mode.
This should prevent compilation errors when building for older kernel whose headers don't support it.
Add support for creating static libraries when the input includes only
Mach-O binaries (and not libraries/archives themselves).
Reviewed by alexshap, Ktwu, smeenai, jhenderson, MaskRay, mtrent
Differential Revision: https://reviews.llvm.org/D83002
Its effect could be achieved by
`-stop-after`,`-print-after`,`-print-after-all`. But a few tests need to
print MIR after ISel which could not be done with
`-print-after`/`-stop-after` since isel pass does not have commandline name.
That's the reason `--print-machineinstrs` is downgraded to
`--print-after-isel` in this patch. `--print-after-isel` could be
removed after we switch to new pass manager since isel pass would have a
commandline text name to use `print-after` or equivalent switches.
The motivation of this patch is to reduce tests dependency on
would-be-deprecated feature.
Reviewed By: arsenm, dsanders
Differential Revision: https://reviews.llvm.org/D83275
This patch changes llvm-readelf (and llvm-readobj for consistency)
behavior to print an error when executed with no input files.
Reading from stdin can be achieved via a '-' for the input
object.
Fixes https://bugs.llvm.org/show_bug.cgi?id=46400
Differential Revision: https://reviews.llvm.org/D83704
Reviewed by: jhenderson, MaskRay, sbc, jyknight
This diff starts the implementation of llvm-libtool-darwin
(an llvm based replacement of cctool's libtool).
Libtool is used for creating static and dynamic libraries
from a bunch of object files given as input.
Reviewed by alexshap, smeenai, jhenderson, MaskRay
Differential Revision: https://reviews.llvm.org/D82923
From @erichkeane:
```
This patch doesn't seem to build for me:
/iusers/ekeane1/workspaces/llvm-project/llvm/tools/llvm-exegesis/lib/X86/X86Counter.cpp: In function ‘llvm::Error llvm::exegesis::parseDataBuffer(const char*, size_t, const void*, const void*, llvm::SmallVector<long int, 4>*)’:
/iusers/ekeane1/workspaces/llvm-project/llvm/tools/llvm-exegesis/lib/X86/X86Counter.cpp:99:37: error: ‘struct perf_branch_entry’ has no member named ‘cycles’
CycleArray->push_back(Entry.cycles);
I'm on RHEL7, so I have kernel 3.10, so it doesn't have 'cycles'.
According ot this: https://elixir.bootlin.com/linux/v4.3/source/include/uapi/linux/perf_event.h#L963 kernel 4.3 is the first time that 'cycles' appeared in this structure.
```
Starting with Skylake, the LBR contains the precise number of cycles between the two
consecutive branches.
Making use of this will hopefully make the measurements more precise than the
existing methods of using RDTSC.
Differential Revision: https://reviews.llvm.org/D77422
In FileCheck.rst, add `-dump-input-context` and `-dump-input-filter`,
and fix some `-dump-input` documentation.
In `FileCheck -help`, `cl::value_desc("kind")` is being ignored for
`-dump-input-filter`, so just drop it.
Extend `-dump-input=help` to mention FILECHECK_OPTS.
This adds the --debug-vars option to llvm-objdump, which prints
locations (registers/memory) of source-level variables alongside the
disassembly based on DWARF info. A vertical line is printed for each
live-range, with a label at the top giving the variable name and
location, and the position and length of the line indicating the program
counter range in which it is valid.
Differential revision: https://reviews.llvm.org/D70720
Before the fix the build of docs-llvm-html would fail.
The D80959 introduced options that are not recognized, so we have
warning as:
llvm-project/llvm/docs/CommandGuide/llvm-dwarfdump.rst:40\
:unknown option: --debug-info
Differential Revision: https://reviews.llvm.org/D82460
Summary: Rename --elf-cg-profile to --cg-profile and keep --elf-cg-profile as an alias of --cg-profile.
Reviewers: jhenderson, MaskRay, espindola, hans
Reviewed By: jhenderson, MaskRay
Subscribers: emaste, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D81855
Summary:
This completes the needed glueing to support reading tbd files from nm.
This includes specifying which slice filtering with `--arch` and a new
option specifically for tbd files `--add-inlinedinfo` which will show
the reexported libraries that are appended in the tbd file.
Reviewers: ributzka, steven_wu, JDevlieghere, jhenderson
Reviewed By: JDevlieghere
Subscribers: hiraditya, MaskRay, dexonsmith, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D81614
This patch is part of a patch series to add support for FileCheck
numeric expressions. This specific patch adds support for specifying the
matching constraint for a numeric expression, ie. how the value being
matched should relate to the numeric expression.
This commit only adds the equality constraint where the numeric value
matched must be equal to the numeric expression. It is the default
matching constraint used when not specified. It is added to provision
other matching constraint (e.g. inequality relations).
Copyright:
- Linaro (changes up to diff 183612 of revision D55940)
- GraphCore (changes in later versions of revision D55940 and
in new revision created off D55940)
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D60391
This patch extends numerical expressions to allow calls to
predefined functions. These calls can be combined with the
existing numerical operators, which includes nesting calls.
The call syntax is:
<func>(<args>)
Where <func> is a predefined string literal, currently limited to
one of add, max, min and sub. <arg> is a comma seperated list of
numerical expressions.
Subscribers: arichardson, hiraditya, thopre, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79936
Having the input dumped on failure seems like a better
default: I debugged FileCheck tests for a while without knowing
about this option, which really helps to understand failures.
Remove `-dump-input-on-failure` and the environment variable
FILECHECK_DUMP_INPUT_ON_FAILURE which are now obsolete.
Differential Revision: https://reviews.llvm.org/D81422
Some of the --debug-* options can take an optional offset. Although the
man page does a good job of making that clear, it's much harder to
discover from the help output.
Currently the only reference to this is the following sentence:
> Where applicable these parameters take an optional =<offset> argument
> to dump only the entry at the specified offset.
This patch changes the help output from to print [=<offset>] after the
options that take an offset.
--debug-info[=<offset>] - Dump the .debug_info section
rdar://problem/63150066
Differential revision: https://reviews.llvm.org/D80959
Summary:
This patch is part of a patch series to add support for FileCheck
numeric expressions. This specific patch adds support signed numeric
values, thus allowing negative numeric values.
As such, the patch adds a new class to represent a signed or unsigned
value and add the logic for type promotion and type conversion in
numeric expression mixing signed and unsigned values. It also adds
the %d format specifier to represent signed value.
Finally, it also adds underflow and overflow detection when performing a
binary operation.
Copyright:
- Linaro (changes up to diff 183612 of revision D55940)
- GraphCore (changes in later versions of revision D55940 and
in new revision created off D55940)
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson
Reviewed By: jhenderson, arichardson
Subscribers: MaskRay, hiraditya, llvm-commits, probinson, dblaikie, grimar, arichardson, kristina, hfinkel, rogfer01, JonChesterfield
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60390
With this change it is be possible to write FileCheck expressions such
as [[#(VAR+1)-2]]. Currently, the only supported arithmetic operators are
plus and minus, so this is not particularly useful yet. However, it our
CHERI fork we have tests that benefit from having multiplication in
FileCheck expressions. Allowing parenthesized expressions is the simplest
way for us to work around the current lack of operator precedence in
FileCheck expressions.
Reviewed By: thopre, jhenderson
Differential Revision: https://reviews.llvm.org/D77383
cctools strip has the option "-T" which removes Swift symbols.
This diff implements this option in llvm-strip for MachO.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D80099
llvm-extract get serveral new options, but we forgot to update doc.
This patch update the doc.
Reviewed By: volkan
Differential Revision: https://reviews.llvm.org/D80413
Add support for generating a dsymutil reproducer. The result is a folder
containing all the object files for linking.
When --gen-reproducer is passed, dsymutil uses a FileCollectorFileSystem
which keeps track of all the files used by dsymutil. These files are
copied into a temporary directory when dsymutil exists.
When this path is passed to --use-reproducer, dsymutil uses a
RedirectingFileSystem that will use the files from the reproducer
directory instead of the actual paths. This means you don't need to mess
with the OSO path prefix.
Differential revision: https://reviews.llvm.org/D79398
YangZhihui