all register values. There is some junk that was appearing at the end
of the result the 'g' packet (read all register values). This function
was being called in:
bool
GDBRemoteRegisterContext::ReadAllRegisterValues (lldb::DataBufferSP &data_sp)
Then the packet data for the 'G' packet (write all registers) was being
placed into "data_sp" so the:
bool
GDBRemoteRegisterContext::WriteAllRegisterValues (const lldb::DataBufferSP &data_sp)
could restore it. In attempting to clean up the extra junk at the end of this
packet data, the packet was getting truncated.
llvm-svn: 131468
Modified ClangUserExpression and ClangUtilityFunction to display the actual
error (if one is available) that made the JIT fail instead of a canned
response.
Fixed the restoring of all register values when the 'G' packet doesn't work
to use the correct data.
llvm-svn: 131454
over when running JITed expressions. The allocated memory cache will cache
allocate memory a page at a time for each permission combination and divvy up
the memory and hand it out in 16 byte increments.
llvm-svn: 131453
give the reason for the interrupt. Also make sure it we don't want to unwind from the evaluation
we print something if it is interrupted.
llvm-svn: 131448
Prior to this fix we would often call SendPacketAndWaitForResponse() which
returns the number of bytes in the response. The UNSUPPORTED response in the
GDB remote protocol is zero bytes and we were checking for it inside an if
statement:
if (SendPacketAndWaitForResponse(...))
{
if (response.IsUnsupportedResponse())
{
// UNSUPPORTED...
// This will never happen...
}
}
We now handle is properly as:
if (SendPacketAndWaitForResponse(...))
{
}
else
{
// UNSUPPORTED...
}
llvm-svn: 131393
the appropriate registers for arm and x86_64. The register names for the
arguments that are the size of a pointer or less are all named "arg1", "arg2",
etc. This allows you to read these registers by name:
(lldb) register read arg1 arg2 arg3
...
You can also now specify you want to see alternate register names when executing
the read register command:
(lldb) register read --alternate
(lldb) register read -A
llvm-svn: 131376
thread plan. In order to get the return value, you can call:
void
ThreadPlanCallFunction::RequestReturnValue (lldb::ValueSP &return_value_sp);
This registers a shared pointer to a return value that will get filled in if
everything goes well. After the thread plan is run the return value will be
extracted for you.
Added an ifdef to be able to switch between the LLVM MCJIT and the standand JIT.
We currently have the standard JIT selected because we have some work to do to
get the MCJIT fuctioning properly.
Added the ability to call functions with 6 argument in the x86_64 ABI.
Added the ability for GDBRemoteCommunicationClient to detect if the allocate
and deallocate memory packets are supported and to not call allocate memory
("_M") or deallocate ("_m") if we find they aren't supported.
Modified the ProcessGDBRemote::DoAllocateMemory(...) and ProcessGDBRemote::DoDeallocateMemory(...)
to be able to deal with the allocate and deallocate memory packets not being
supported. If they are not supported, ProcessGDBRemote will switch to calling
"mmap" and "munmap" to allocate and deallocate memory instead using our
trivial function call support.
Modified the "void ProcessGDBRemote::DidLaunchOrAttach()" to correctly ignore
the qHostInfo triple information if any was specified in the target. Currently
if the target only specifies an architecture when creating the target:
(lldb) target create --arch i386 a.out
Then the vendor, os and environemnt will be adopted by the target.
If the target was created with any triple that specifies more than the arch:
(lldb) target create --arch i386-unknown-unknown a.out
Then the target will maintain its triple and not adopt any new values. This
can be used to help force bare board debugging where the dynamic loader for
static files will get used and users can then use "target modules load ..."
to set addressses for any files that are desired.
Added back some convenience functions to the lldb_private::RegisterContext class
for writing registers with unsigned values. Also made all RegisterContext
constructors explicit to make sure we know when an integer is being converted
to a RegisterValue.
llvm-svn: 131370
solve the build break due to the lack of this method.
It also propose a solution to the API changes in RegisterContext.
I upgraded also the the python version in the makefile. My linux
installation has python2.7 and AFAIK also the latest ubuntu
has this version of python so maybe is worth upgrading.
Patch by Marco Minutoli <mminutoli@gmail.com>
[Note: I had to hand merge in the diffs since patch thinks it is a corrupt patch.]
llvm-svn: 131313
as non-const in the debug information, added a fallback
to GetFunctionAddress, adding the const qualifier after
the fact and searching again.
llvm-svn: 131299
representing variables whose type must be inferred
from the way they are used. Functions without debug
information now return UnknownAnyTy and must be cast.
Variables with no debug information are not yet using
UnknownAnyTy; instead they are assumed to be void*.
Support for variables of unknown type is coming (and,
in fact, some relevant support functions are included
in this commit) but will take a bit of extra effort.
The testsuite has also been updated to reflect the new
requirement that the result of printf be cast, i.e.
expr (int) printf("Hello world!")
llvm-svn: 131263
of the current instruction plus 8. And for Triple::thumb, it is plus 4.
rdar://problem/9170971
lldb disassembly's symbol information not correct (off by 2?)
llvm-svn: 131256
pointers:
virtual bool
PrepareTrivialCall (Thread &thread,
lldb::addr_t sp,
lldb::addr_t functionAddress,
lldb::addr_t returnAddress,
lldb::addr_t *arg1_ptr,
lldb::addr_t *arg2_ptr,
lldb::addr_t *arg3_ptr) const = 0;
Prior to this it was:
virtual bool
PrepareTrivialCall (Thread &thread,
lldb::addr_t sp,
lldb::addr_t functionAddress,
lldb::addr_t returnAddress,
lldb::addr_t arg,
lldb::addr_t *this_arg,
lldb::addr_t *cmd_arg) const = 0;
This was because the function that called this slowly added more features to
be able to call a C++ member function that might have a "this" pointer, and
then later added "self + cmd" support for objective C. Cleaning this code up
and the code that calls it makes it easier to implement the functions for
new targets.
The MacOSX_arm::PrepareTrivialCall() is now filled in and ready for testing.
llvm-svn: 131221
respective ABI plugins as they were plug-ins that supplied ABI specfic info.
Also hookep up the UnwindAssemblyInstEmulation so that it can generate the
unwind plans for ARM.
Changed the way ABI plug-ins are handed out when you get an instance from
the plug-in manager. They used to return pointers that would be mananged
individually by each client that requested them, but now they are handed out
as shared pointers since there is no state in the ABI objects, they can be
shared.
llvm-svn: 131193
looked up. Queries for global types were made
too specific -- including the current module
and compile unit in the query was limiting the
search when we wanted a truly global search.
llvm-svn: 131145
treated as being permanently resident in target
memory. In fact, since the expression's stack frame
is deleted and potentially re-used after the
expression completes, the variables need to be treated
as being freeze-dried.
llvm-svn: 131104
into some cleanup I have been wanting to do when reading/writing registers.
Previously all RegisterContext subclasses would need to implement:
virtual bool
ReadRegisterBytes (uint32_t reg, DataExtractor &data);
virtual bool
WriteRegisterBytes (uint32_t reg, DataExtractor &data, uint32_t data_offset = 0);
There is now a new class specifically designed to hold register values:
lldb_private::RegisterValue
The new register context calls that subclasses must implement are:
virtual bool
ReadRegister (const RegisterInfo *reg_info, RegisterValue ®_value) = 0;
virtual bool
WriteRegister (const RegisterInfo *reg_info, const RegisterValue ®_value) = 0;
The RegisterValue class must be big enough to handle any register value. The
class contains an enumeration for the value type, and then a union for the
data value. Any integer/float values are stored directly in an appropriate
host integer/float. Anything bigger is stored in a byte buffer that has a length
and byte order. The RegisterValue class also knows how to copy register value
bytes into in a buffer with a specified byte order which can be used to write
the register value down into memory, and this does the right thing when not
all bytes from the register values are needed (getting a uint8 from a uint32
register value..).
All RegiterContext and other sources have been switched over to using the new
regiter value class.
llvm-svn: 131096
a new "QLaunchArch:<arch-name>" where <arch-name> is the architecture name.
This allows us to remotely launch a debugserver and then set the architecture
for the binary we will launch.
llvm-svn: 131064
variables be evaluated statically.
Also fixed a bug that caused the results of
statically-evaluated expressions to be materialized
improperly.
This bug also removes some duplicate code.
llvm-svn: 131042
Removed the "image" command and moved it to "target modules". Added an alias
for "image" to "target modules".
Added some new target commands to be able to add and load modules to a target:
(lldb) target modules add <path>
(lldb) target modules load [--file <path>] [--slide <offset>] [<sect-name> <sect-load-addr> ...]
So you can load individual sections without running a target:
(lldb) target modules load --file /usr/lib/libSystem.B.dylib __TEXT 0x7fccc80000 __DATA 0x1234000000
Or you can rigidly slide an entire shared library:
(lldb) target modules load --file /usr/lib/libSystem.B.dylib --slid 0x7fccc80000
This should improve bare board debugging when symbol files need to be slid around manually.
llvm-svn: 130796
convenience variables (from the ExecutionContext) each time
it is entered: lldb.debugger, lldb.target, lldb.process,
lldb.thread, lldb.frame.
If a frame (or thread, process, etc) does not currently exist,
the variable contains the Python value 'None'.
llvm-svn: 130792
command line driver, including the lldb prompt being output by
editline, the asynchronous process output & error messages, and
asynchronous messages written by target stop-hooks.
As part of this it introduces a new Stream class,
StreamAsynchronousIO. A StreamAsynchronousIO object is created with a
broadcaster, who will eventually broadcast the stream's data for a
listener to handle, and an event type indicating what type of event
the broadcaster will broadcast. When the Write method is called on a
StreamAsynchronousIO object, the data is appended to an internal
string. When the Flush method is called on a StreamAsynchronousIO
object, it broadcasts it's data string and clears the string.
Anything in lldb-core that needs to generate asynchronous output for
the end-user should use the StreamAsynchronousIO objects.
I have also added a new notification type for InputReaders, to let
them know that a asynchronous output has been written. This is to
allow the input readers to, for example, refresh their prompts and
lines, if desired. I added the case statements to all the input
readers to catch this notification, but I haven't added any code for
handling them yet (except to the IOChannel input reader).
llvm-svn: 130721
interface.
Added a quick way to set the platform though the SBDebugger interface. I will
actually an a SBPlatform support soon, but for now this will do.
ConnectionFileDescriptor can be passed a url formatted as: "fd://<fd>" where
<fd> is a file descriptor in the current process. This is handy if you have
services, deamons, or other tools that can spawn processes and give you a
file handle.
llvm-svn: 130565
new OptionGroup subclasses for:
- output file for use with options:
long opts: --outfile <path> --append--output
short opts: -o <path> -A
- format for use with options:
long opts: --format <format>
- variable object display controls for depth, pointer depth, wether to show
types, show summary, show location, flat output, use objc "po" style summary.
Modified ValueObjectMemory to be able to be created either with a TypeSP or
a ClangASTType.
Switched "memory read" over to use OptionGroup subclasses: one for the outfile
options, one for the command specific options, and one for the format.
llvm-svn: 130334
Switch the EmulateInstruction to use the standard RegisterInfo structure
that is defined in the lldb private types intead of passing the reg kind and
reg num everywhere. EmulateInstruction subclasses also need to provide
RegisterInfo structs given a reg kind and reg num. This eliminates the need
for the GetRegisterName() virtual function and allows more complete information
to be passed around in the read/write register callbacks. Subclasses should
always provide RegiterInfo structs with the generic register info filled in as
well as at least one kind of register number in the RegisterInfo.kinds[] array.
llvm-svn: 130256
are defined as enumerations. Current bits include:
eEmulateInstructionOptionAutoAdvancePC
eEmulateInstructionOptionIgnoreConditions
Modified the EmulateInstruction class to have a few more pure virtuals that
can help clients understand how many instructions the emulator can handle:
virtual bool
SupportsEmulatingIntructionsOfType (InstructionType inst_type) = 0;
Where instruction types are defined as:
//------------------------------------------------------------------
/// Instruction types
//------------------------------------------------------------------
typedef enum InstructionType
{
eInstructionTypeAny, // Support for any instructions at all (at least one)
eInstructionTypePrologueEpilogue, // All prologue and epilogue instructons that push and pop register values and modify sp/fp
eInstructionTypePCModifying, // Any instruction that modifies the program counter/instruction pointer
eInstructionTypeAll // All instructions of any kind
} InstructionType;
This allows use to tell what an emulator can do and also allows us to request
these abilities when we are finding the plug-in interface.
Added the ability for an EmulateInstruction class to get the register names
for any registers that are part of the emulation. This helps with being able
to dump and log effectively.
The UnwindAssembly class now stores the architecture it was created with in
case it is needed later in the unwinding process.
Added a function that can tell us DWARF register names for ARM that goes
along with the source/Utility/ARM_DWARF_Registers.h file:
source/Utility/ARM_DWARF_Registers.c
Took some of plug-ins out of the lldb_private namespace.
llvm-svn: 130189
i.e., with 'SBStream &description' first, followed by 'DescriptionLevel level'.
Modify lldbutil.py so that get_description() for a target or breakpoint location
can just take the lldb object itself without specifying an option to mean option
lldb.eDescriptionLevelBrief. Modify TestTargetAPI.py to exercise this logic path.
llvm-svn: 130147
inline contexts when the deepest most block is not inlined.
Added source path remappings to the lldb_private::Target class that allow it
to remap paths found in debug info so we can find source files that are elsewhere
on the current system.
Fixed disassembly by function name to disassemble inline functions that are
inside other functions much better and to show enough context before the
disassembly output so you can tell where things came from.
Added the ability to get more than one address range from a SymbolContext
class for the case where a block or function has discontiguous address ranges.
llvm-svn: 130044
pointer to a ValueObject or any of its dependent ValueObjects, and the whole cluster will
stay around as long as that shared pointer stays around.
llvm-svn: 130035
set by default when dumping registers. If you want to see all of the register
sets you can use the "--all" option:
(lldb) register read --all
If you want to just see some register sets, you can currently specify them
by index:
(lldb) register read --set 0 --set 2
We need to get shorter register set names soon so we can specify the register
sets by name without having to type too much. I will make this change soon.
You can also have any integer encoded registers resolve the address values
back to any code or data from the object files using the "--lookup" option.
Below is sample output when stopped in the libc function "puts" with some
const strings in registers:
Process 8973 stopped
* thread #1: tid = 0x2c03, 0x00007fff828fa30f libSystem.B.dylib`puts + 1, stop reason = instruction step into
frame #0: 0x00007fff828fa30f libSystem.B.dylib`puts + 1
(lldb) register read --lookup
General Purpose Registers:
rax = 0x0000000100000e98 "----------------------------------------------------------------------"
rbx = 0x0000000000000000
rcx = 0x0000000000000001
rdx = 0x0000000000000000
rdi = 0x0000000100000e98 "----------------------------------------------------------------------"
rsi = 0x0000000100800000
rbp = 0x00007fff5fbff710
rsp = 0x00007fff5fbff280
r8 = 0x0000000000000040
r9 = 0x0000000000000000
r10 = 0x0000000000000000
r11 = 0x0000000000000246
r12 = 0x0000000000000000
r13 = 0x0000000000000000
r14 = 0x0000000000000000
r15 = 0x0000000000000000
rip = 0x00007fff828fa30f libSystem.B.dylib`puts + 1
rflags = 0x0000000000000246
cs = 0x0000000000000027
fs = 0x0000000000000000
gs = 0x0000000000000000
As we can see, we see two constant strings and the PC (register "rip") is
showing the code it resolves to.
I fixed the register "--format" option to work as expected.
Added a setting to disable skipping the function prologue when setting
breakpoints as a target settings variable:
(lldb) settings set target.skip-prologue false
Updated the user settings controller boolean value handler funciton to be able
to take the default value so it can correctly respond to the eVarSetOperationClear
operation.
Did some usability work on the OptionValue classes.
Fixed the "image lookup" command to correctly respond to the "--verbose"
option and display the detailed symbol context information when looking up
line table entries and functions by name. This previously was only working
for address lookups.
llvm-svn: 129977
it everywhere internally.
Modified the "command regex" command to be able to specify all regular
expressions on the command line. For example:
(lldb) command regex f s/^$/finish/ 's/([0-9]+)/frame select %1/'
Also improved the error reporting when an invalid 's/<regex>/<subst>/' argument
is given.
llvm-svn: 129889
To do this currently, it must be done in multi-line mode:
(lldb) commands regex --help "Help text for command" --syntax "syntax for command" <cmd-name>
Any example that would use "f" for "finish" when there are no arguments,
and "f <num>" to do a "frame select <num>" would be:
(lldb) commands regex f
Enter multiple regular expressions in the form s/find/replace/ then terminate with an empty line:
s/^$/finish/
s/([0-9]+)/frame select %1/
(lldb) f 11
frame select 12
...
(lldb) f
finish
...
Also added the string version of the OptionValue as OptionValueString.
llvm-svn: 129855
The idea is that the instruction to be emulated is actually executed
on the hardware to be emulated, with the before and after state of the
hardware being captured and 'freeze-dried' into .dat files. The
emulation testing code then loads the before & after state from the
.dat file, emulates the instruction using the before state, and
compares the resulting state to the 'after' state. If they match, the
emulation is accurate, otherwise there is a problem.
The final format of the .dat files needs a bit more work; the plan is
to generalize them a bit and to convert the plain values to key-value pairs.
But I wanted to get this first pass committed.
This commit adds arm instruction emulation testing to the testsuite, along with
many initial .dat files.
It also fixes a bug in the llvm disassembler, where 32-bit thumb opcodes
were getting their upper & lower 16-bits reversed.
There is a new Instruction sub-class, that is intended to be loaded
from a .dat file rather than read from an executable. There is also a
new EmulationStateARM class, for handling the before & after states.
EmulationStates for other architetures can be added later when we
emulate their instructions.
llvm-svn: 129832
places that were dumping values for the settings. Centralized all of the
value dumping into a single place. When dumping values that aren't strings
we no longer surround the value with single quotes. When dumping values that
are strings, surround the string value with double quotes. When dumping array
values, assume they are always string values, and don't put quotes around
dictionary values.
llvm-svn: 129826
line tables specify breakpoints can be set in the source. When dumping the
source, the number of breakpoints that can be set on a source line are shown
as a prefix:
(lldb) source list -f test.c -l1 -c222 -b
1 #include <stdio.h>
2 #include <sys/fcntl.h>
3 #include <unistd.h>
4 int
5 sleep_loop (const int num_secs)
[2] 6 {
7 int i;
[1] 8 for (i=0; i<num_secs; ++i)
9 {
[1] 10 printf("%d of %i - sleep(1);\n", i, num_secs);
[1] 11 sleep(1);
12 }
13 return 0;
[1] 14 }
15
16 int
17 main (int argc, char const* argv[])
[1] 18 {
[1] 19 printf("Process: %i\n\n", getpid());
[1] 20 puts("Press any key to continue..."); getchar();
[1] 21 sleep_loop (20);
22 return 12;
[1] 23 }
Above we can see there are two breakpoints for line 6 and one breakpoint for
lines 8, 10, 11, 14, 18, 19, 20, 21 and 23. All other lines have no line table
entries for them. This helps visualize the data provided in the debug
information without having to manually dump all line tables. It also includes
all inline breakpoint that may result for a given file which can also be very
handy to see.
llvm-svn: 129747
$ lldb --arch i386-unknown-unknown a.out
It would then create a target with only the "i386" part due to
SBDebugger::GetDefaultArchitecture(...) truncating the arch triple due to the
way things used to be.
llvm-svn: 129731
threads, and stack frame down in the lldb_private::Process,
lldb_private::Thread, lldb_private::StackFrameList and the
lldb_private::StackFrame classes. We had some command line
commands that had duplicate versions of the process status
output ("thread list" and "process status" for example).
Removed the "file" command and placed it where it should
have been: "target create". Made an alias for "file" to
"target create" so we stay compatible with GDB commands.
We can now have multple usable targets in lldb at the
same time. This is nice for comparing two runs of a program
or debugging more than one binary at the same time. The
new command is "target select <target-idx>" and also to see
a list of the current targets you can use the new "target list"
command. The flow in a debug session can be:
(lldb) target create /path/to/exe/a.out
(lldb) breakpoint set --name main
(lldb) run
... hit breakpoint
(lldb) target create /bin/ls
(lldb) run /tmp
Process 36001 exited with status = 0 (0x00000000)
(lldb) target list
Current targets:
target #0: /tmp/args/a.out ( arch=x86_64-apple-darwin, platform=localhost, pid=35999, state=stopped )
* target #1: /bin/ls ( arch=x86_64-apple-darwin, platform=localhost, pid=36001, state=exited )
(lldb) target select 0
Current targets:
* target #0: /tmp/args/a.out ( arch=x86_64-apple-darwin, platform=localhost, pid=35999, state=stopped )
target #1: /bin/ls ( arch=x86_64-apple-darwin, platform=localhost, pid=36001, state=exited )
(lldb) bt
* thread #1: tid = 0x2d03, 0x0000000100000b9a a.out`main + 42 at main.c:16, stop reason = breakpoint 1.1
frame #0: 0x0000000100000b9a a.out`main + 42 at main.c:16
frame #1: 0x0000000100000b64 a.out`start + 52
Above we created a target for "a.out" and ran and hit a
breakpoint at "main". Then we created a new target for /bin/ls
and ran it. Then we listed the targest and selected our original
"a.out" program, so we showed two concurent debug sessions
going on at the same time.
llvm-svn: 129695
expressions that are simple enough to get passed to the "frame var" underpinnings. The parser code will
have to be changed to also query for the dynamic types & offsets as it is looking up variables.
The behavior of "frame var" is controlled in two ways. You can pass "-d {true/false} to the frame var
command to get the dynamic or static value of the variables you are printing.
There's also a general setting:
target.prefer-dynamic-value (boolean) = 'true'
which is consulted if you call "frame var" without supplying a value for the -d option.
llvm-svn: 129623
DWARFDebugAranges::Sort() calls std::stable_sort() over a set of address ranges
and then proceeds to collapse neighboring ranges together.
One problem with the current implementation is that it does an incomplete job.
When a pair of ranges are merged the next pair considered does not include the
just-merged range. IOW, three consecutive ranges are never collapsed into one.
Another problem is that for each range merged we are calling
std::vector::erase() which "shifts" all remaining elements of the vector by one
position on every merge. The end result (in the worst case) is a quadratic
algorithm -- not good when the input vector is large.
The following patch merges all consecutive ranges and removes the quadratic
behavior. The implementation uses an auxiliary vector of indices in order to
remember all ranges that can be dropped, then performs the coalescing of ranges
in a single pass.
Patch from Stephen Wilson with some minor modification by me.
llvm-svn: 129595
Modified the OptionGroupOptions to be able to specify only some of the options
that should be appended by using the usage_mask in the group defintions and
also provided a way to remap them to a new usage mask after the copy. This
allows options to be re-used and also targetted for specific option groups.
Modfied the CommandArgumentType to have a new eArgTypePlatform enumeration.
Taught the option parser to be able to automatically use the appropriate
auto completion for a given options if nothing is explicitly specified
in the option definition. So you don't have to specify it in the option
definition tables.
Renamed the default host platform name to "host", and the default platform
hostname to be "localhost".
Modified the "file" and "platform select" commands to make sure all options
and args are good prior to creating a new platform. Also defer the computation
of the architecture in the file command until all options are parsed and the
platform has either not been specified or reset to a new value to avoid
computing the arch more than once.
Switch the PluginManager code over to using llvm::StringRef for string
comparisons and got rid of all the AccessorXXX functions in lieu of the newer
mutex + collection singleton accessors.
llvm-svn: 129483
lldb_private::OptionGroup
lldb_private::OptionGroupOptions
OptionGroup lets you define a class that encapsulates settings that you want
to reuse in multiple commands. It contains only the option definitions and the
ability to set the option values, but it doesn't directly interface with the
lldb_private::Options class that is the front end to all of the CommandObject
option parsing. For that the OptionGroupOptions class can be used. It aggregates
one or more OptionGroup objects and directs the option setting to the
appropriate OptionGroup class. For an example of this, take a look at the
CommandObjectFile and how it uses its "m_option_group" object shown below
to be able to set values in both the FileOptionGroup and PlatformOptionGroup
classes. The members used in CommandObjectFile are:
OptionGroupOptions m_option_group;
FileOptionGroup m_file_options;
PlatformOptionGroup m_platform_options;
Then in the constructor for CommandObjectFile you can combine the option
settings. The code below shows a simplified version of the constructor:
CommandObjectFile::CommandObjectFile(CommandInterpreter &interpreter) :
CommandObject (...),
m_option_group (interpreter),
m_file_options (),
m_platform_options(true)
{
m_option_group.Append (&m_file_options);
m_option_group.Append (&m_platform_options);
m_option_group.Finalize();
}
We append the m_file_options and then the m_platform_options and then tell
the option group the finalize the results. This allows the m_option_group to
become the organizer of our prefs and after option parsing we end up with
valid preference settings in both the m_file_options and m_platform_options
objects. This also allows any other commands to use the FileOptionGroup and
PlatformOptionGroup classes to implement options for their commands.
Renamed:
virtual void Options::ResetOptionValues();
to:
virtual void Options::OptionParsingStarting();
And implemented a new callback named:
virtual Error Options::OptionParsingFinished();
This allows Options subclasses to verify that the options all go together
after all of the options have been specified and gives the chance for the
command object to return an error. It also gives a chance to take all of the
option values and produce or initialize objects after all options have
completed parsing.
Modfied:
virtual Error
SetOptionValue (int option_idx, const char *option_arg) = 0;
to be:
virtual Error
SetOptionValue (uint32_t option_idx, const char *option_arg) = 0;
(option_idx is now unsigned).
llvm-svn: 129415
the CommandInterpreter where it was always being used.
Make sure that Modules can track their object file offsets correctly to
allow opening of sub object files (like the "__commpage" on darwin).
Modified the Platforms to be able to launch processes. The first part of this
move is the platform soon will become the entity that launches your program
and when it does, it uses a new ProcessLaunchInfo class which encapsulates
all process launching settings. This simplifies the internal APIs needed for
launching. I want to slowly phase out process launching from the process
classes, so for now we can still launch just as we used to, but eventually
the platform is the object that should do the launching.
Modified the Host::LaunchProcess in the MacOSX Host.mm to correctly be able
to launch processes with all of the new eLaunchFlag settings. Modified any
code that was manually launching processes to use the Host::LaunchProcess
functions.
Fixed an issue where lldb_private::Args had implicitly defined copy
constructors that could do the wrong thing. This has now been fixed by adding
an appropriate copy constructor and assignment operator.
Make sure we don't add empty ModuleSP entries to a module list.
Fixed the commpage module creation on MacOSX, but we still need to train
the MacOSX dynamic loader to not get rid of it when it doesn't have an entry
in the all image infos.
Abstracted many more calls from in ProcessGDBRemote down into the
GDBRemoteCommunicationClient subclass to make the classes cleaner and more
efficient.
Fixed the default iOS ARM register context to be correct and also added support
for targets that don't support the qThreadStopInfo packet by selecting the
current thread (only if needed) and then sending a stop reply packet.
Debugserver can now start up with a --unix-socket (-u for short) and can
then bind to port zero and send the port it bound to to a listening process
on the other end. This allows the GDB remote platform to spawn new GDB server
instances (debugserver) to allow platform debugging.
llvm-svn: 129351
- Add ability to control whether or not the emulator advances the
PC register (in the emulation state), if the instruction itself
does not change the pc value..
- Fix a few typos in asm description strings.
- Fix bug in the carry flag calculation.
llvm-svn: 129168
Something changed in commit r129112 where a few standard headers vanished from
the include chain when building on Linux. Fix up by including limits.h for
INT_MAX and PATH_MAX where needed, and stdio.h for printf().
llvm-svn: 129130
This allows you to have a platform selected, then specify a triple using
"i386" and have the remaining triple items (vendor, os, and environment) set
automatically.
Many interpreter commands take the "--arch" option to specify an architecture
triple, so now the command options needed to be able to get to the current
platform, so the Options class now take a reference to the interpreter on
construction.
Modified the build LLVM building in the Xcode project to use the new
Xcode project level user definitions:
LLVM_BUILD_DIR - a path to the llvm build directory
LLVM_SOURCE_DIR - a path to the llvm sources for the llvm that will be used to build lldb
LLVM_CONFIGURATION - the configuration that lldb is built for (Release,
Release+Asserts, Debug, Debug+Asserts).
I also changed the LLVM build to not check if "lldb/llvm" is a symlink and
then assume it is a real llvm build directory versus the unzipped llvm.zip
package, so now you can actually have a "lldb/llvm" directory in your lldb
sources.
llvm-svn: 129112
NSEC_PER_SEC is not defined in sys/time.h on Linux. Replaced that macro with a
static constant inside TimeValue.
Patch by Marco Minutoli.
llvm-svn: 129071
This method only needs to be overridden in the remote debugging case, the
base class handles the host case. Since we do not do remote debugging on
Linux yet and there is a typo that causes a build issue, just remove this
method for now.
llvm-svn: 129069
Move InstructionLLVM out of DisassemblerLLVM class.
Add instruction emulation function calls to SBInstruction and SBInstructionList APIs.
llvm-svn: 128956
GDBRemoteCommunicationServer classes. This involved adding a new packet
named "qSpeedTest" which can test the speed of a packet send/response pairs
using a wide variety of send/recv packet sizes.
Added a few new connection classes: one for shared memory, and one for using
mach messages (Apple only). The mach message stuff is experimental and not
working yet, but added so I don't lose the code. The shared memory stuff
uses pretty standard calls to setup shared memory.
llvm-svn: 128837
lldb::SymbolType SBSymbol::GetType();
lldb::SectionType SBAddress::GetSectionType ();
lldb::SBModule SBAddress::GetModule ();
Also add an lldb::SBModule::GetUUIDString() API which is easier for Python
to work with in the test script.
llvm-svn: 128695
event.
Modified the ProcessInfo structure to contain all process arguments. Using the
new function calls on MacOSX allows us to see the full process name, not just
the first 16 characters.
Added a new platform command: "platform process info <pid> [<pid> <pid> ...]"
that can be used to get detailed information for a process including all
arguments, user and group info and more.
llvm-svn: 128694
const data, etc, and also for SBAddress objects to classify their type of
section they are in and also getting the module for a section offset address.
lldb::SymbolType SBSymbol::GetType();
lldb::SectionType SBAddress::GetSectionType ();
lldb::SBModule SBAddress::GetModule ();
llvm-svn: 128602
Add code to emulate VLDM ARM instruction (loading multiplt floating point registers).
Add function declarations for other floating point instructions to emulate.
llvm-svn: 128589
class now implements the Host functionality for a lot of things that make
sense by default so that subclasses can check:
int
PlatformSubclass::Foo ()
{
if (IsHost())
return Platform::Foo (); // Let the platform base class do the host specific stuff
// Platform subclass specific code...
int result = ...
return result;
}
Added new functions to the platform:
virtual const char *Platform::GetUserName (uint32_t uid);
virtual const char *Platform::GetGroupName (uint32_t gid);
The user and group names are cached locally so that remote platforms can avoid
sending packets multiple times to resolve this information.
Added the parent process ID to the ProcessInfo class.
Added a new ProcessInfoMatch class which helps us to match processes up
and changed the Host layer over to using this new class. The new class allows
us to search for processs:
1 - by name (equal to, starts with, ends with, contains, and regex)
2 - by pid
3 - And further check for parent pid == value, uid == value, gid == value,
euid == value, egid == value, arch == value, parent == value.
This is all hookup up to the "platform process list" command which required
adding dumping routines to dump process information. If the Host class
implements the process lookup routines, you can now lists processes on
your local machine:
machine1.foo.com % lldb
(lldb) platform process list
PID PARENT USER GROUP EFF USER EFF GROUP TRIPLE NAME
====== ====== ========== ========== ========== ========== ======================== ============================
99538 1 username usergroup username usergroup x86_64-apple-darwin FileMerge
94943 1 username usergroup username usergroup x86_64-apple-darwin mdworker
94852 244 username usergroup username usergroup x86_64-apple-darwin Safari
94727 244 username usergroup username usergroup x86_64-apple-darwin Xcode
92742 92710 username usergroup username usergroup i386-apple-darwin debugserver
This of course also works remotely with the lldb-platform:
machine1.foo.com % lldb-platform --listen 1234
machine2.foo.com % lldb
(lldb) platform create remote-macosx
Platform: remote-macosx
Connected: no
(lldb) platform connect connect://localhost:1444
Platform: remote-macosx
Triple: x86_64-apple-darwin
OS Version: 10.6.7 (10J869)
Kernel: Darwin Kernel Version 10.7.0: Sat Jan 29 15:17:16 PST 2011; root:xnu-1504.9.37~1/RELEASE_I386
Hostname: machine1.foo.com
Connected: yes
(lldb) platform process list
PID PARENT USER GROUP EFF USER EFF GROUP TRIPLE NAME
====== ====== ========== ========== ========== ========== ======================== ============================
99556 244 username usergroup username usergroup x86_64-apple-darwin trustevaluation
99548 65539 username usergroup username usergroup x86_64-apple-darwin lldb
99538 1 username usergroup username usergroup x86_64-apple-darwin FileMerge
94943 1 username usergroup username usergroup x86_64-apple-darwin mdworker
94852 244 username usergroup username usergroup x86_64-apple-darwin Safari
The lldb-platform implements everything with the Host:: layer, so this should
"just work" for linux. I will probably be adding more stuff to the Host layer
for launching processes and attaching to processes so that this support should
eventually just work as well.
Modified the target to be able to be created with an architecture that differs
from the main executable. This is needed for iOS debugging since we can have
an "armv6" binary which can run on an "armv7" machine, so we want to be able
to do:
% lldb
(lldb) platform create remote-ios
(lldb) file --arch armv7 a.out
Where "a.out" is an armv6 executable. The platform then can correctly decide
to open all "armv7" images for all dependent shared libraries.
Modified the disassembly to show the current PC value. Example output:
(lldb) disassemble --frame
a.out`main:
0x1eb7: pushl %ebp
0x1eb8: movl %esp, %ebp
0x1eba: pushl %ebx
0x1ebb: subl $20, %esp
0x1ebe: calll 0x1ec3 ; main + 12 at test.c:18
0x1ec3: popl %ebx
-> 0x1ec4: calll 0x1f12 ; getpid
0x1ec9: movl %eax, 4(%esp)
0x1ecd: leal 199(%ebx), %eax
0x1ed3: movl %eax, (%esp)
0x1ed6: calll 0x1f18 ; printf
0x1edb: leal 213(%ebx), %eax
0x1ee1: movl %eax, (%esp)
0x1ee4: calll 0x1f1e ; puts
0x1ee9: calll 0x1f0c ; getchar
0x1eee: movl $20, (%esp)
0x1ef5: calll 0x1e6a ; sleep_loop at test.c:6
0x1efa: movl $12, %eax
0x1eff: addl $20, %esp
0x1f02: popl %ebx
0x1f03: leave
0x1f04: ret
This can be handy when dealing with the new --line options that was recently
added:
(lldb) disassemble --line
a.out`main + 13 at test.c:19
18 {
-> 19 printf("Process: %i\n\n", getpid());
20 puts("Press any key to continue..."); getchar();
-> 0x1ec4: calll 0x1f12 ; getpid
0x1ec9: movl %eax, 4(%esp)
0x1ecd: leal 199(%ebx), %eax
0x1ed3: movl %eax, (%esp)
0x1ed6: calll 0x1f18 ; printf
Modified the ModuleList to have a lookup based solely on a UUID. Since the
UUID is typically the MD5 checksum of a binary image, there is no need
to give the path and architecture when searching for a pre-existing
image in an image list.
Now that we support remote debugging a bit better, our lldb_private::Module
needs to be able to track what the original path for file was as the platform
knows it, as well as where the file is locally. The module has the two
following functions to retrieve both paths:
const FileSpec &Module::GetFileSpec () const;
const FileSpec &Module::GetPlatformFileSpec () const;
llvm-svn: 128563
Jim Ingham