Summary:
When building the selection DAG at ISel all PHI nodes are
selected and lowered to Machine Instruction PHI nodes before
we start to create any SDNodes. So there are no SDNodes for
values produced by the PHI nodes.
In the past when selecting a dbg.value intrinsic that uses
the value produced by a PHI node we have been handling such
dbg.value intrinsics as "dangling debug info". I.e. we have
not created a SDDbgValue node directly, because there is
no existing SDNode for the PHI result, instead we deferred
the creationg of a SDDbgValue until we found the first use
of the PHI result.
The old solution had a couple of flaws. The position of the
selected DBG_VALUE instruction would end up quite late in a
basic block, and for example not directly after the PHI node
as in the LLVM IR input. And in case there were no use at all
in the basic block the dbg.value could be dropped completely.
This patch introduces a new VREG kind of SDDbgValue nodes.
It is similar to a SDNODE kind of node, but it refers directly
to a virtual register and not a SDNode. When we do selection
for a dbg.value that is using the result of a PHI node we
can do a lookup of the virtual register directly (as it already
is determined for the PHI node) and create a SDDbgValue node
immediately instead of delaying the selection until we find a
use.
This should fix a problem with losing debug info at ISel
as seen in PR37234 (https://bugs.llvm.org/show_bug.cgi?id=37234).
It does not resolve PR37234 completely, because the debug info
is dropped later on in the BranchFolder (see D46184).
Reviewers: #debug-info, aprantl
Reviewed By: #debug-info, aprantl
Subscribers: rnk, gbedwell, aprantl, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D46129
llvm-svn: 331182
This patch updates some code responsible the skip debug info to use
BasicBlock::instructionsWithoutDebug. I think this makes things
slightly simpler and more direct.
Reviewers: mkuper, rengolin, dcaballe, aprantl, vsk
Reviewed By: rengolin
Differential Revision: https://reviews.llvm.org/D46254
llvm-svn: 331174
ObjectFileELF assumes that code section has ".text" name. There is an
exception for kalimba toolchain that can use arbitrary names, but other
toolchains also could use arbitrary names for code sections. For
example, corert uses separate section for compiled managed code. As lldb
doesn't recognize such section it leads to problem with breakpoints on
arm, because debugger cannot determine instruction set (arm/thumb) and
uses incorrect breakpoint opcode that breaks program execution.
This change allows debugger to correctly handle such code sections. We
assume that section is a code section if it has SHF_EXECINSTR flag set
and has SHT_PROGBITS type.
Patch by Konstantin Baladurin <k.baladurin@partner.samsung.com>.
Differential Revision: https://reviews.llvm.org/D44998
llvm-svn: 331173
A typo in the patch (using syntax instead of m_syntax) resulted in the
normalization not working properly for windows filespecs when the syntax
was passed as host-native. This did not affect the unit tests, as all of
those pass an explicity syntax, but failed gloriously when running the
full test suite.
I also fix an expectation in an lldb-mi test, which was now failing
because it was expecting a path to be echoed verbatim, but we were now
normalizing it.
As a drive-by, this also fixes the default-in-fully-covered-switch
warning and removes an unused argument from the NeedsNormalization
function.
llvm-svn: 331172
The PMAXSD/PMINSD instregexs had been written as PMAX(C?)SD - looks like this was a search+replace error when matching float MAXSD/MINSD commutative instructions.
llvm-svn: 331167
Previously these instructions were unselectable and instead were generated
through the instruction mapping tables.
Reviewers: atanasyan, smaksimovic, abeserminji
Differential Revision: https://reviews.llvm.org/D46055
llvm-svn: 331165
Summary:
The getConstraintRegister method is used by semantic checking of
inline assembly statements in order to diagnose conflicts between
clobber list and input/output lists. Currently ARM and AArch64 don't
override getConstraintRegister, so conflicts between registers
assigned to variables in asm labels and clobber lists are not
diagnosed. Such conflicts can cause assertion failures in the back end
and even miscompilations.
This patch implements getConstraintRegister for ARM and AArch64
targets. Since these targets don't have single-register constraints,
the implementation is trivial and just returns the register specified
in an asm label (if any).
Reviewers: eli.friedman, javed.absar, thopre
Reviewed By: thopre
Subscribers: rengolin, eraman, rogfer01, myatsina, kristof.beyls, cfe-commits, chrib
Differential Revision: https://reviews.llvm.org/D45965
llvm-svn: 331164
The problem is reported in:
https://github.com/google/sanitizers/issues/945
We already disable as much as possible after multithreaded fork,
trace switching is last place that can hang due to basic
operations (memory accesses, function calls).
Disable it too.
llvm-svn: 331163
This patch extends the 'isSVEVectorRegWithShiftExtend' function to
improve diagnostics for SVE's gather load (scalar + vector) addressing
modes. Instead of always suggesting the 'unscaled' addressing mode,
the use of DiagnosticPredicate enables a more specific error message
in the context where the scaling is incorrect. For example:
ld1h z0.d, p0/z, [x0, z0.d, lsl #2]
^
shift amount should be '1'
Instead of suggesting the packed, unscaled addressing mode:
expected 'z[0..31].d, (uxtw|sxtw)'
the assembler now suggests using the proper scaling:
expected 'z[0..31].d, (lsl|uxtw|sxtw) #1'
Reviewers: fhahn, rengolin, samparker, SjoerdMeijer, javed.absar
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D46124
llvm-svn: 331162
The instructions have predicates of Not64BitMode, but there are identical strings in InstAliases that have Mode32Bit and Mode16Bit. But the ordering is uncontrolled and the less specific Not64BitMode was ordered first.
This patch hides the Not64BitMode from the table so there is no conflict anymore.
llvm-svn: 331158
When a '>>' token is split into two '>' tokens (in C++11 onwards), or (as an
extension) when we do the same for other tokens starting with a '>', we can't
just use a location pointing to the first '>' as the location of the split
token, because that would result in our miscomputing the length and spelling
for the token. As a consequence, for example, a refactoring replacing 'A<X>'
with something else would sometimes replace one character too many, and
similarly diagnostics highlighting a template-id source range would highlight
one character too many.
Fix this by creating an expansion range covering the first character of the
'>>' token, whose spelling is '>'. For this to work, we generalize the
expansion range of a macro FileID to be either a token range (the common case)
or a character range (used in this new case).
llvm-svn: 331155
These aliases are used to default the memory forms of call and jmp to the size of the operating mode. This doesn't work for Intel syntax. We have a different hack in the AsmParser code itself to force a size on unsized memory operands.
llvm-svn: 331153
_LIBCPP_ENABLE_CXX17_REMOVED_UNEXPECTED_FUNCTIONS is currently used to
bring back std::unexpected, which is removed in C++17, but still needed
for libc++abi for backward compatibility.
This macro used to define in cxa_exception.cpp only, but actually
needed for all sources that touches exceptions.
So, a build-system-level macro is better fit to define this macro.
https://reviews.llvm.org/D46056
Patch from Taiju Tsuiku <tzik@chromium.org>!
llvm-svn: 331150
Most of the add<operandname>Operands() functions are the same
and can be replaced by using a single 'RenderMethod' in
the AArch64InstrFormats.td file. Since many of the scaled
immediates (with different scaling/bits) are the same, most of
these can reuse the same AsmOperandClass.
Reviewers: fhahn, rengolin, samparker, SjoerdMeijer, javed.absar
Reviewed By: samparker
Differential Revision: https://reviews.llvm.org/D46122
llvm-svn: 331146
Summary:
This change is part of the larger XRay Profiling Mode effort.
Here we implement an arena allocator, for fixed sized buffers used in a
segmented array implementation. This change adds the segmented array
data structure, which relies on the allocator to provide and maintain
the storage for the segmented array.
Key features of the `Allocator` type:
* It uses cache-aligned blocks, intended to host the actual data. These
blocks are cache-line-size multiples of contiguous bytes.
* The `Allocator` has a maximum memory budget, set at construction
time. This allows us to cap the amount of data each specific
`Allocator` instance is responsible for.
* Upon destruction, the `Allocator` will clean up the storage it's
used, handing it back to the internal allocator used in
sanitizer_common.
Key features of the `Array` type:
* Each segmented array is always backed by an `Allocator`, which is
either user-provided or uses a global allocator.
* When an `Array` grows, it grows by appending a segment that's
fixed-sized. The size of each segment is computed by the number of
elements of type `T` that can fit into cache line multiples.
* An `Array` does not return memory to the `Allocator`, but it can keep
track of the current number of "live" objects it stores.
* When an `Array` is destroyed, it will not return memory to the
`Allocator`. Users should clean up the `Allocator` independently of
the `Array`.
* The `Array` type keeps a freelist of the chunks it's used before, so
that trimming and growing will re-use previously allocated chunks.
These basic data structures are used by the XRay Profiling Mode
implementation to implement efficient and cache-aware storage for data
that's typically read-and-write heavy for tracking latency information.
We're relying on the cache line characteristics of the architecture to
provide us good data isolation and cache friendliness, when we're
performing operations like searching for elements and/or updating data
hosted in these cache lines.
Reviewers: echristo, pelikan, kpw
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D45756
llvm-svn: 331141
Summary:
This is a follow up to D45420 (included here since it is still under review and this change is dependent on that) and D45072 (committed).
Actual change for this patch is LoopVectorize* and cmakefile. All others are all from D45420.
LoopVectorizationLegality is an analysis and thus really belongs to Analysis tree. It is modular enough and it is reusable enough ---- we can further improve those aspects once uses outside of LV picks up.
Hopefully, this will make it easier for people familiar with vectorization theory, but not necessarily LV itself to contribute, by lowering the volume of code they should deal with. We probably should start adding some code in LV to check its own capability (i.e., vectorization is legal but LV is not ready to handle it) and then bail out.
Reviewers: rengolin, fhahn, hfinkel, mkuper, aemerson, mssimpso, dcaballe, sguggill
Reviewed By: rengolin, dcaballe
Subscribers: egarcia, rogfer01, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D45552
llvm-svn: 331139
This allows the instruction selection to follow mode in Intel syntax. And allows a suffix to be used to change size.
This matches gas behavior from what I could tell.
llvm-svn: 331138
Clang incorrectly applied the packed attribute to base classes. Per GCC's
documentation and as can be observed from its behavior, packed only applies to
members, not base classes.
This change is conditioned behind -fclang-abi-compat so that an ABI break can
be avoided by users if desired.
Differential Revision: https://reviews.llvm.org/D46218
llvm-svn: 331136
It doesn't really exist. The instruction always writes 16-bits of memory. Putting a REX.w on it won't change anything.
While I was touching the encoding tests to remove it, I added some other missing register form test cases.
llvm-svn: 331135
Bjorn Pettersson