If a workgroup size is known to be not greater than wavefront size
the s_barrier instruction is not needed since all threads are guarantied
to come to the same point at the same time.
Differential Revision: https://reviews.llvm.org/D31731
llvm-svn: 299659
Since the BUILD_VECTOR has already been checked by
isBuildVectorOfConstantSDNodes() in SelectionDAG::getNode() for a
SIGN_EXTEND_INREG, it can be assumed that Op is always either undef or a
ConstantSDNode, and Ops.size() will always equal VT.getVectorNumElements().
llvm-svn: 299647
Summary: This resolves the issue of tablegen-erated includes in the headers for non-GlobalISel builds in a simpler way than before.
Reviewers: qcolombet, ab
Reviewed By: ab
Subscribers: igorb, ab, mgorny, dberris, rovka, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30998
llvm-svn: 299637
During the optimisation of jump tables in the constant island pass,
an extra ADD could be left over, now dead but not removed.
Differential Revision: https://reviews.llvm.org/D31389
llvm-svn: 299634
This is necessary to pass the lit test suite at llvm/utils/lit/tests.
There are some pre-existing failures here, but now switching to pools
doesn't regress any tests.
I had to change test-data/lit.cfg to import DummyConfig from a module to
fix pickling problems, but I think it'll be OK if we require test
formats to be written in real .py modules outside lit.cfg files.
I also discovered that in some circumstances AsyncResult.wait() will not
raise KeyboardInterrupt in a timely manner, but you can pass a non-zero
timeout to work around this. This makes threading.Condition.wait use a
polling loop that runs through the interpreter, so it's capable of
asynchronously raising KeyboardInterrupt.
llvm-svn: 299605
Moving Modules into `testMergedProgram` is incorrect (and causes segmentation
faults) since all callers expect to retain ownership. This is evidenced by the
later calls to `unique_ptr<Module>::get` in the same function.
Differential Revision: https://reviews.llvm.org/D31727
llvm-svn: 299596
Summary:
LSV wants to know the maximum size that can be loaded to a vector register.
On X86, this always matches the maximum register width. Implement this
accordingly and add a test to make sure that LSV can vectorize up to the
maximum permissible width on X86.
Reviewers: delena, arsenm
Reviewed By: arsenm
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D31504
llvm-svn: 299589
Summary:
Remove all the caching the clobber walker does, and that the
caching walker does. With the patch to enable storing clobbering
access results for stores, i can find no improvement with the cache
turned on (and a number of degradations, both time and memory, from
the cost of caching. For a large program i have, we do millions of
lookups and inserts with zero hits).
I haven't tried to rename or simplify the walker otherwise yet.
(Appreciate some perf testing on this past my own testing)
Reviewers: george.burgess.iv, davide
Subscribers: Prazek, llvm-commits
Differential Revision: https://reviews.llvm.org/D31576
llvm-svn: 299578
Note payloads are padded to a multiple of 4 bytes in size, but the size
of the string that should be print can be smaller e.g. the n_descsz
field in gold's version note is 9, so that's the whole size of the
string that should be printed. The padding is part of the format of a
SHT_NOTE section or PT_NOTE segment, but it's not part of the note
itself.
Printing the extra null bytes may confuse some tools, e.g. when the
llvm-readobj is sent to grep, it treats the output as binary because
it contains a null byte.
Differential Revision: https://reviews.llvm.org/D30804
llvm-svn: 299576
This is a follow-on to r299096 which added support for fmadd.
Subtract does not have the case where with two multiply operands we commute in
order to fuse with the multiply with the fewer uses.
llvm-svn: 299572
Summary:
Use an explicit work queue instead, to avoid accidentally
causing stack overflows for input with very large CFGs.
Reviewed By: mehdi_amini
Differential Revision: https://reviews.llvm.org/D31681
llvm-svn: 299569
There must be some opportunity to refactor big chunks of nearly duplicated code in FoldOrOfICmps / FoldAndOfICmps.
Also, none of this works with vectors, but it should.
llvm-svn: 299568
Summary:
This drastically reduces lit test execution startup time on Windows. Our
previous strategy was to manually create one Process per job and manage
the worker pool ourselves. Instead, let's use the worker pool provided
by multiprocessing. multiprocessing.Pool(jobs) returns almost
immediately, and initializes the appropriate number of workers, so they
can all start executing tests immediately. This avoids the ramp-up
period that the old implementation suffers from. This appears to speed
up small test runs.
Here are some timings of the llvm-readobj tests on Windows using the
various execution strategies:
# multiprocessing.Pool:
$ for i in `seq 1 3`; do tim python ./bin/llvm-lit.py -sv ../llvm/test/tools/llvm-readobj/ --use-process-pool |& grep real: ; done
real: 0m1.156s
real: 0m1.078s
real: 0m1.094s
# multiprocessing.Process:
$ for i in `seq 1 3`; do tim python ./bin/llvm-lit.py -sv ../llvm/test/tools/llvm-readobj/ --use-processes |& grep real: ; done
real: 0m6.062s
real: 0m5.860s
real: 0m5.984s
# threading.Thread:
$ for i in `seq 1 3`; do tim python ./bin/llvm-lit.py -sv ../llvm/test/tools/llvm-readobj/ --use-threads |& grep real: ; done
real: 0m9.438s
real: 0m10.765s
real: 0m11.079s
I kept the old code to launch processes in case this change doesn't work
on all platforms that LLVM supports, but at some point I would like to
remove both the threading and old multiprocessing execution strategies.
Reviewers: modocache, rafael
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31677
llvm-svn: 299560
Commit r298799 changed code that made the XFAIL on MachineBranchProb.ll
irrelevant, but some configurations still failed. I can't reproduce it
locally, so I'm hoping that enabling this will tell me if some
configurations will really fail or if they were just too slow.
llvm-svn: 299558
This test case depends on the loop being vectorized without forcing the
vectorization factor. If the profitability ever changes in the future (due to
cost model improvements), the test may no longer work as intended. Instead of
checking the resulting IR, we should just check the instruction costs. The
costs will be computed regardless if vectorization is profitable.
llvm-svn: 299545
This is a generic combine enabled via target hook to reduce icmp logic as discussed in:
https://bugs.llvm.org/show_bug.cgi?id=32401
It's likely that other targets will want to enable this hook for scalar transforms,
and there are probably other patterns that can use bitwise logic to reduce comparisons.
Note that we are missing an IR canonicalization for these patterns, and we will probably
prefer the pair-of-compares form in IR (shorter, more likely to fold).
Differential Revision: https://reviews.llvm.org/D31483
llvm-svn: 299542
When DAGCombiner visits a SIGN_EXTEND_INREG of a BUILD_VECTOR with
constant operands, a new BUILD_VECTOR node will be created transformed
constants.
Llvm-stress found a case where the new BUILD_VECTOR had constant operands
of an illegal type, because the (legal) element type is in fact not a legal
scalar type.
This patch changes this so that the new BUILD_VECTOR has the same operand
type as the old one.
Review: Eli Friedman, Nirav Dave
https://bugs.llvm.org//show_bug.cgi?id=32422
llvm-svn: 299540
Summary:
Temporaries are now allocated to operands instead of predicates and this
allocation is used to correctly pair up the rendered operands with the
matched operands.
Previously, ComplexPatterns were allocated temporaries independently in the
Src Pattern and Dst Pattern, leading to mismatches. Additionally, the Dst
Pattern failed to account for the allocated index and therefore always used
temporary 0, 1, ... when it should have used base+0, base+1, ...
Thanks to Aditya Nandakumar for noticing the bug.
Depends on D30539
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: igorb, dberris, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D31054
llvm-svn: 299538
A number of backends (AArch64, MIPS, ARM) have been using
MCContext::reportError to report issues such as out-of-range fixup values in
their TgtAsmBackend. This is great, but because MCContext couldn't easily be
threaded through to the adjustFixupValue helper function from its usual
callsite (applyFixup), these backends ended up adding an MCContext* argument
and adding another call to applyFixup to processFixupValue. Adding an
MCContext parameter to applyFixup makes this unnecessary, and even better -
applyFixup can take a reference to MCContext rather than a potentially null
pointer.
Differential Revision: https://reviews.llvm.org/D30264
llvm-svn: 299529
This is a latent bug that's been hanging around for a while. For a loop-invariant
pointer, expandBounds would return the range {Ptr, Ptr}, but this was interpreted
as a half-open range, not a closed range. So we ended up planting incorrect
bounds checks. Even worse, they were tautological, so we ended up incorrectly
executing the optimized loop.
llvm-svn: 299526
Fix a bug in ARC contract pass where an iterator that pointed to a
deleted instruction was dereferenced.
It appears that tryToContractReleaseIntoStoreStrong was incorrectly
assuming that a call to objc_retain would not immediately follow a call
to objc_release.
rdar://problem/25276306
llvm-svn: 299507
Before r294774, there was a problem when lowering broadcasts to use
128-bit subvectors.
When we looked through a bitcast to find the broadcast input, we'd keep
using the original type, so you'd end up with things like:
(v8f32 (broadcast
(v4f32 (extract_subvector
(v8i32 V),
...))
))
r294774 fixed it to always emit subvectors with the scalar type of the
original source.
It also introduced some asserts, to check that we use scalars with
the same size, and vectors with the same number of elements.
The scalar size equality is checked earlier when looking through bitcasts,
and is a useful assert.
However, the number of elements don't have to be identical: we're always
going to extract a 128-bit subvector, and we can have different size
inputs if we looked through a concat_vector to find a 256-bit source.
Relax the overzealous assert.
Replace it with a check of the original source vector being 256 or 512
bits. If it's 128 bits, we can't extract_subvector from it.
Fixes PR32371.
llvm-svn: 299490
Decouple this setting from EnableIRPA.
To support function calls on AMDGPU, it is necessary to
report the global register usage throughout the kernel's
call graph, so callees need to be handled first.
llvm-svn: 299487
stores with some fixes.
Summary:
This enables us to cache the clobbering access for stores, despite the
fact that we can't rewrite the use-def chains themselves.
Early testing shows that, after this change, for larger testcases, it
will be a significant net positive (memory and time) to remove the
walker caching.
Reviewers: george.burgess.iv, davide
Subscribers: Prazek, llvm-commits
Differential Revision: https://reviews.llvm.org/D31567
llvm-svn: 299486
Set correct default flags and section type based on its name for .text,
.data, .bss, .init_array, .fini_array, .preinit_array, .tdata, and .tbss
and support section name suffixes for .data.*, .rodata.*, .text.*,
.bss.*, .tdata.* and .tbss.* which matches the behavior of GAS.
Fixes PR31888.
Differential Revision: https://reviews.llvm.org/D30229
llvm-svn: 299484
This improves upon r246462: that prevented FMOVs from being emitted
for the cross-class INSERT_SUBREGs by disabling the formation of
INSERT_SUBREGs of LOAD. But the ld1.s that we started selecting
caused us to introduce partial dependencies on the vector register.
Avoid that by using SCALAR_TO_VECTOR: it's a first-class citizen that
is folded away by many patterns, including the scalar LDRS that we
want in this case.
Credit goes to Adam for finding the issue!
llvm-svn: 299482
If an instruction has a true dependency, it makes sense for to use that
register for any undef read operands in the same instruction (we'll have
to wait for that register to become available anyway). This logic
was already implemented. However, the code would then still try to
revisit that instruction and break the dependency (and always fail,
since by definition a true dependency has to be live before the
instruction). Avoid revisiting such instructions as a performance
optimization. No functional change.
Differential Revision: https://reviews.llvm.org/D30173
llvm-svn: 299467
Currently we only fold with ConstantInt RHS. This generalizes to any Constant RHS.
Differential Revision: https://reviews.llvm.org/D31610
llvm-svn: 299466
This mode is just like -mcmodel=small except that it moves the
thread pointer from TPIDR_EL0 to TPIDR_EL1.
Patch by Roland McGrath.
Differential Revision: https://reviews.llvm.org/D31624
llvm-svn: 299462
This shares detection logic with ARM(32), since AArch64 capable CPUs may
also run in 32-bit system mode.
We observe weird /proc/cpuinfo output for MSM8992 and MSM8994, where
they report all CPU cores as one single model, depending on which CPU
core the kernel is running on. As a workaround, we hardcode the known
CPU part name for these SoCs.
For big.LITTLE systems, this patch would only return the part name of
the first core (usually the little core). Proper support will be added
in a follow-up change.
Differential Revision: D31675
llvm-svn: 299458
MS assembly syntax provide us with the 'EVEN' directive as a synonymous to at&t '.even'.
This patch include the (small, simple) changes need to allow it.
Test is provided at the following (clang-side) review:
https://reviews.llvm.org/D27418
Differential Revision: https://reviews.llvm.org/D27417
llvm-svn: 299453
When the ProcessAllSections flag (introduced in r204398) is set RuntimeDyld is
supposed to make a call to the client's memory manager for every section in each
object that is loaded. Due to some missing checks, this was not happening in all
cases. This patch adds the missing cases, and fixes the Orc unit test that
verifies correct behavior for ProcessAllSections (The unit test had been
silently bailing out due to an ordering issue: a change in the test order meant
that this unit-test was running before the native target was registered. This
issue has also been fixed in this patch).
This fixes <rdar://problem/22789965>
llvm-svn: 299449
https://reviews.llvm.org/D30537 / https://reviews.llvm.org/rL296977 added these transforms
and other related transforms to the generic DAGCombiner (with a hook that x86 sets to true),
so these patterns should not exist by the time we reach the target-specific combiner hook.
llvm-svn: 299448
This patch optimizes two memory intrinsic operations: memset and memcpy based
on the profiled size of the operation. The high level transformation is like:
mem_op(..., size)
==>
switch (size) {
case s1:
mem_op(..., s1);
goto merge_bb;
case s2:
mem_op(..., s2);
goto merge_bb;
...
default:
mem_op(..., size);
goto merge_bb;
}
merge_bb:
Differential Revision: http://reviews.llvm.org/D28966
llvm-svn: 299446
Fix other cases of 'const StringRef' creeping back in at the same time.
This should fix the llvm-clang-x86_64-expensive-checks-win buildbot.
llvm-svn: 299433
This patch is a part one of two reviews, one for the clang and the other for LLVM.
The patch deletes the back-end intrinsics and adds support for them in the auto upgrade.
Differential Revision: https://reviews.llvm.org/D31393
llvm-svn: 299432
Summary:
Lift the restrictions that prevented the tree walking introduced in the
previous change and add support for patterns like:
(G_ADD (G_MUL (G_SEXT $src1), (G_SEXT $src2)), $src3) -> SMADDWrrr $dst, $src1, $src2, $src3
Also adds support for G_SEXT and G_ZEXT to support these cases.
One particular aspect of this that I should draw attention to is that I've
tried to be overly conservative in determining the safety of matches that
involve non-adjacent instructions and multiple basic blocks. This is intended
to be used as a cheap initial check and we may add a more expensive check in
the future. The current rules are:
* Reject if any instruction may load/store (we'd need to check for intervening
memory operations.
* Reject if any instruction has implicit operands.
* Reject if any instruction has unmodelled side-effects.
See isObviouslySafeToFold().
Reviewers: t.p.northover, javed.absar, qcolombet, aditya_nandakumar, ab, rovka
Reviewed By: ab
Subscribers: igorb, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30539
llvm-svn: 299430
This patch teaches the hazard scheduler how to handle empty blocks
when search for the next real instruction when dealing with forbidden
slots.
Reviewers: slthakur
Differential Revision: https://reviews.llvm.org/D31293
llvm-svn: 299427
PSADBW pattern currently supports the 32 bit IR pattern and only GLT (greather than) comparison.
The patch extends the pattern to catch also 64 bit IR pattern and includes all other comparison types (not only GLT).
Differential Revision: https://reviews.llvm.org/D31577
llvm-svn: 299425
Otherwise, yamlize in YAMLTraits.h might be wrongly defined.
This makes some AMDGPU tests fail when LLVM_LINK_LLVM_DYLIB is set.
Differential Revision: https://reviews.llvm.org/D30508
llvm-svn: 299415
Summary:
The TypeTableBuilder provides stable storage for type records. We don't
need to copy all of the bytes into a flat vector before adding it to the
TpiStreamBuilder.
This makes addTypeRecord take an ArrayRef<uint8_t> and a hash code to go
with it, which seems like a simplification.
Reviewers: ruiu, zturner, inglorion
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31634
llvm-svn: 299406
Summary:
MASM can produce type streams that are not topologically sorted. It can
even produce type streams with circular references, but those are not
common in practice.
Reviewers: inglorion, ruiu
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31629
llvm-svn: 299403
Summary:
Add a hook for simplification of shufflevector's with the following rules:
- Constant folding - NFC, as it was already being done by the default handler.
- If only one of the operands is constant, constant fold the shuffle if the
mask does not select elements from the variable operand - to show the hook is firing and affecting the test-cases.
Reviewers: RKSimon, craig.topper, spatel, sanjoy, nlopes, majnemer
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31525
llvm-svn: 299393
Dont emit Mapping symbols for sections that contain only data.
Summary:
Dont emit mapping symbols for sections that contain only data.
Reviewers: rengolin, weimingz, kparzysz, t.p.northover, peter.smith
Reviewed By: t.p.northover
Patched by Shankar Easwaran <shankare@codeaurora.org>
Subscribers: alekseyshl, t.p.northover, llvm-commits
Differential Revision: https://reviews.llvm.org/D30724
llvm-svn: 299392
It can be costly to transfer from the gprs to the xmm registers and can prevent loads merging.
This patch splits vXi16/vXi32/vXi64 BUILD_VECTORS that use the same operand in multiple elements into a BUILD_VECTOR with only a single insertion of each of those elements and then performs an unary shuffle to duplicate the values.
There are a couple of minor regressions this patch unearths due to some missing MOVDDUP/BROADCAST folds that I will address in a future patch.
Note: Now that vector shuffle lowering and combining is pretty good we should be reusing that instead of duplicating so much in LowerBUILD_VECTOR - this is the first of several patches to address this.
Differential Revision: https://reviews.llvm.org/D31373
llvm-svn: 299387
It turns out that SimplifyDemandedInstructionBits will get called earlier and remove bits from C1 first. Effectively doing (X & (C1&C2)) | C2. So by the time it got to this check there could be no common bits.
I think the DAGCombiner has the same check but its check can be executed because it handles demanded bits later. I'll look at it next.
llvm-svn: 299384
The x86_64 ABI requires that the stack is 16 byte aligned on function calls. Thus, the 8-byte error code, which is pushed by the CPU for certain exceptions, leads to a misaligned stack. This results in bugs such as Bug 26413, where misaligned movaps instructions are generated.
This commit fixes the misalignment by adjusting the stack pointer in these cases. The adjustment is done at the beginning of the prologue generation by subtracting another 8 bytes from the stack pointer. These additional bytes are popped again in the function epilogue.
Fixes Bug 26413
Patch by Philipp Oppermann.
Differential Revision: https://reviews.llvm.org/D30049
llvm-svn: 299383
Summary:
Move the aarch64-type-promotion pass within the existing type promotion framework in CGP.
This change also support forking sexts when a new sext is required for promotion.
Note that change is based on D27853 and I am submitting this out early to provide a better idea on D27853.
Reviewers: jmolloy, mcrosier, javed.absar, qcolombet
Reviewed By: qcolombet
Subscribers: llvm-commits, aemerson, rengolin, mcrosier
Differential Revision: https://reviews.llvm.org/D28680
llvm-svn: 299379
Summary:
This changes the static method TimerGroup::printAllJSONValues from private to
public, to match the static method TimerGroup::printAll. When trying to drive
the reporting machinery by hand, the existing API is _almost_ flexible enough,
but this entrypoint is required to intermix printing timers with other
non-timer output.
The underlying motive here is a Swift change to consolidate the collection of
timers, LLVM statistics and other (non-assert-dependent) counters into JSON
files, which requires a bit of manual intervention in LLVM's stat and timer
output routines. See https://github.com/apple/swift/pull/8477 for details.
Reviewers: MatzeB
Reviewed By: MatzeB
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31566
llvm-svn: 299371
Support for writing this module code was removed in r73220, which was well
before the LLVM 3.0 release, so we do not need to be able to understand it
for backwards compatibility.
Differential Revision: https://reviews.llvm.org/D31563
llvm-svn: 299370
This reverts commit r299047 which is incorrect because the
simplification may result in incorrect propogation of undefs to users of
the folded shuffle.
Thanks to Andrea Di Biagio for pointing this out.
llvm-svn: 299368
1. Improve enum, function, and variable names.
2. Improve comments.
3. Fix variable capitalization.
4. Run clang-format.
As an existing code comment suggests, this should work with vector types / splat constants too,
so making this look right first will reduce the diffs needed for that change.
llvm-svn: 299365
This moves the isMask and isShiftedMask functions to be class methods. They now use the MathExtras.h function for single word size and leading/trailing zeros/ones or countPopulation for the multiword size. The previous implementation made multiple temorary memory allocations to do the bitwise arithmetic operations to match the MathExtras.h implementation.
Differential Revision: https://reviews.llvm.org/D31565
llvm-svn: 299362
- we are now using immediate AsmOperands so that the range check functions are
tablegen'ed.
- Big bonus is that error messages become much more accurate, i.e. instead of a
useless "invalid operand" error message it will not say that the immediate
operand must in range [x,y], which is why regression tests needed updating.
More tablegen operand descriptions could probably benefit from using
immediateAsmOperand, but this is a first good step to get rid of most of the
nearly identical range check functions. I will address the remaining immediate
operands in next clean ups.
Differential Revision: https://reviews.llvm.org/D31333
llvm-svn: 299358
This patch is one step to attempt to unify the main APInt interface and the tc functions used by APFloat.
This patch adds a WordType to APInt and uses that in all the tc functions. I've added temporary typedefs to APFloat to alias it to integerPart to keep the patch size down. I'll work on removing that in a future patch.
In future patches I hope to reuse the tc functions to implement some of the main APInt functionality.
I may remove APINT_ from BITS_PER_WORD and WORD_SIZE constants so that we don't have the repetitive APInt::APINT_ externally.
Differential Revision: https://reviews.llvm.org/D31523
llvm-svn: 299341
The callers have already performed the necessary cast before calling. This allows us to remove a comment that says the instruction must be a BinaryOperator and make it explicit in the argument type.
Had to add a default case to the switch because BinaryOperator::getOpcode() returns a BinaryOps enum.
llvm-svn: 299339
As far as I can tell this combine is fully handled by SimplifyDemandedInstructionBits.
I was only looking at this because it is the only user of APIntOps::isShiftedMask which is itself broken. As demonstrated by r299187. I was going to fix isShiftedMask and needed to make sure we had coverage for the new cases it would expose to this combine. But looks like we can nuke it instead.
Differential Revision: https://reviews.llvm.org/D31543
llvm-svn: 299337
Summary:
Depends on D30928.
This adds support for coercion of stores and memory instructions that do not require insertion to process.
Another few tests down.
I added the relevant tests from rle.ll
Reviewers: davide
Subscribers: llvm-commits, Prazek
Differential Revision: https://reviews.llvm.org/D30929
llvm-svn: 299330
Disable bypassing if one of the operands looks like a hash value. Slow
division often occurs in hashtable implementations and fast division is
never taken there because a hash value is extremely unlikely to have
enough upper bits set to zero.
A value is considered to be hash-like if it is produced by
1) XOR operation
2) Multiplication by a constant wider than the shorter type
3) PHI node with all incoming values being hash-like
Differential Revision: https://reviews.llvm.org/D28200
llvm-svn: 299329
Summary:
This enables us to cache the clobbering access for stores, despite the
fact that we can't rewrite the use-def chains themselves.
Early testing shows that, after this change, for larger testcases, it will be a significant net positive (memory and time) to remove the walker caching.
Reviewers: george.burgess.iv, davide
Subscribers: Prazek, llvm-commits
Differential Revision: https://reviews.llvm.org/D31567
llvm-svn: 299322
Summary:
GreatestComonDivisor currently makes a copy of both its inputs. Then in the loop we do one move and two copies, plus any allocation the urem call does.
This patch changes it to take its inputs by value so that we can do a move of any rvalue inputs instead of copying. Then in the loop we do 3 move assignments and no copies. This way the only possible allocations we have in the loop is from the urem call.
Reviewers: dblaikie, RKSimon, hans
Reviewed By: dblaikie
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31572
llvm-svn: 299314
The code already allowed vector types in via "isInteger" (which might want
a more specific name), so use splat-friendly constant predicates to match
those types.
llvm-svn: 299304
processing the congruence class of the store.
Because we use the stored value of a store as the def, it isn't dead
just because it appears as a def when it comes from a store.
Note: I have not hit any cases with the memory code as it is where
this breaks anything, just because of what memory congruences we
actually allow. In a followup that improves memory congruence,
this bug actually breaks real stuff (but the verifier catches it).
llvm-svn: 299300
This can only happen when we have a mix of zero and undef elements and the two vectors have a different arrangement of zeros/undefs. The shuffle should eventually be constant folded to all zeros.
Fixes PR32484.
llvm-svn: 299291
REG_SEQUENCE falls into the same category as COPY for operands mapping:
- They don't have MCInstrDesc with register constraints
- The input variable could use whatever register classes
- It is possible to have register class already assigned to the operands
In particular, given REG_SEQUENCE are always target specific because of
the subreg indices. Those indices must apply to the register class of
the definition of the REG_SEQUENCE and therefore, the target must set a
register class to that definition. As a result, the generic code can
always use that register class to derive a valid mapping for a
REG_SEQUENCE.
llvm-svn: 299285
This patch refactors the code used in llc such that all the users of the
addPassesToEmitFile API have access to a homogeneous way of handling
start/stop-after/before options right out of the box.
Previously each user would have needed to duplicate this logic and set
up its own options.
NFC
llvm-svn: 299282
This removes a parameter from the routine that was responsible for a lot of the issue. It was a bit count that had to be set to the BitWidth of the APInt and would get passed to getLowBitsSet. This guaranteed the call to getLowBitsSet would create an all ones value. This was then compared to (V | (V-1)). So the only shifted masks we detected had to have the MSB set.
The one in tree user is a transform in InstCombine that never fires due to earlier transforms covering the case better. I've submitted a patch to remove it completely, but for now I've just adapted it to the new interface for isShiftedMask.
llvm-svn: 299273
Summary: GlobalValue has two getGUID methods: an instance method and a static method. The static method takes a string, which is expected to be what GlobalValue::getRealLinkageName() would return. In LTO.cpp, we were not doing this consistently, sometimes passing an IR name instead. This change makes it so that we call getRealLinkageName() first, making the static getGUID return value consistent with the instance method. Without this change, compiling FileCheck with ThinLTO on Windows fails with numerous undefined symbol errors. With the change, it builds successfully.
Reviewers: pcc, rnk
Reviewed By: pcc
Subscribers: tejohnson, mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D31444
llvm-svn: 299268
This way we ensure we immediately revisit the instruction and do any additional optimizations before visiting the users. Otherwise we might visit the users, then the instruction, then users again, then instruction again.
llvm-svn: 299267
This is helpful when extracting objects from archives produced by MSVC's
lib.exe, which users absolute paths to describe the archive members.
llvm-svn: 299264
(and (setlt X, 0), (setlt Y, 0)) --> (setlt (and X, Y), 0)
We have 7 similar folds, but this one got away. The fact that the
x86 test with a branch didn't change is probably a separate bug. We
may also be missing this and the related folds in instcombine.
llvm-svn: 299252
A common way to implement nearbyint is by fiddling with the floating
point environment and calling rint. This is used at least by the BSD
libm and musl. As such, canonicalizing the latter to the former will
create infinite loops for libm and generally pessimize performance, at
least when the generic C versions are used.
This change preserves the rint in the libcall translation and also
handles the domain truncation logic, so that rint with float argument
will be reduced to rintf etc.
llvm-svn: 299247
Add a new node to act as a fancy bitcast from f16 operations to
i32 that implicitly zero the high 16-bits of the result.
Alternatively could try making v2f16 legal and canonicalizing
on build_vectors.
llvm-svn: 299246
These are the same tests added for x86 with r299238,
but PPC doesn't specify all branches as cheap, so we
see different patterns in tests with branches.
llvm-svn: 299244
Summary:
This feature enables folding of logical shift operations of up to 3 places into addressing mode on Kryo and Falkor that have a fastpath LSL.
Reviewers: mcrosier, rengolin, t.p.northover
Subscribers: junbuml, gberry, llvm-commits, aemerson
Differential Revision: https://reviews.llvm.org/D31113
llvm-svn: 299240
This wasn't covering for the case where you have multiple latches and hence
the use of the same loop-id which needs to be mapped to the same loop-id.
llvm-svn: 299237
Our _MM_HINT_T0/T1 constant values are 3/2 which matches gcc, but not icc or Intel documentation. Interestingly gcc had this same bug on their implementation of the gather/scatter builtins at one point too.
Fixes PR32411.
llvm-svn: 299234
Summary: Currently the VP metadata was dropped when InstCombine converts a call to direct call. This patch converts the VP metadata to branch_weights so that its hotness is recorded.
Reviewers: eraman, davidxl
Reviewed By: davidxl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31344
llvm-svn: 299228
Implementation of TargetInstrInfo::findCommutedOpIndices for MIPS target,
restricting commutativity to second and third operand only for
dpaadd_[su].df instructions therein.
Prior to this change, there were cases where the vector that is to be added
to the dot product of the other two could take a position other than the
first one in the instruction, generating false output in the destination
vector.
Such behavior has been noticed in the two functions generating v2i64 output
values so far. Other ones may exhibit such behavior as well, just not for
the vector operands which are present in the test at the moment.
Tests altered so that the function's first operand is a constant splat so
that it can be loaded with a ldi instruction, since that is the case in
which the erroneous instruction operand placement has occurred. We check
that the register which is present in the ldi instruction is placed as the
first operand in the corresponding dpadd instruction.
Patch by Stefan Maksimovic.
Differential Revision: https://reviews.llvm.org/D30827
llvm-svn: 299223
Since LOCR only accepts GR32 virtual registers, its operands must be copied
into this regclass in insertSelect(), when an LOCR is built. Otherwise, the
case where the source operand was GRX32 will produce invalid IR.
Review: Ulrich Weigand
llvm-svn: 299220
Currently ComputeNumSignBits returns the minimum number of sign bits for all elements of vector data, when we may only be interested in one/some of the elements.
This patch adds a DemandedElts argument that allows us to specify the elements we actually care about. The original ComputeNumSignBits implementation calls with a DemandedElts demanding all elements to match current behaviour. Scalar types set this to 1.
I've only added support for BUILD_VECTOR and EXTRACT_VECTOR_ELT so far, all others will default to demanding all elements but can be updated in due course.
Followup to D25691.
Differential Revision: https://reviews.llvm.org/D31311
llvm-svn: 299219
Even on older subtargets that lack vector support, there may be vector values
with just one element in the input program. These are converted during DAG
legalization to scalar values.
The pre-legalize SystemZ DAGCombiner methods should in this circumstance not
touch these nodes. This patch adds a check for this in
SystemZTargetLowering::combineEXTRACT_VECTOR_ELT().
Review: Ulrich Weigand
llvm-svn: 299213
The patch rL298481 was reverted due to crash on clang-with-lto-ubuntu build.
The reason of the crash was type mismatch between either a or b and RHS in the following situation:
LHS = sext(a +nsw b) > RHS.
This is quite rare, but still possible situation. Normally we need to cast all {a, b, RHS} to their widest type.
But we try to avoid creation of new SCEV that are not constants to avoid initiating recursive analysis that
can take a lot of time and/or cache a bad value for iterations number. To deal with this, in this patch we
reject this case and will not try to analyze it if the type of sum doesn't match with the type of RHS. In this
situation we don't need to create any non-constant SCEVs.
This patch also adds an assertion to the method IsProvedViaContext so that we could fail on it and not
go further into range analysis etc (because in some situations these analyzes succeed even when the passed
arguments have wrong types, what should not normally happen).
The patch also contains a fix for a problem with too narrow scope of the analysis caused by wrong
usage of predicates in recursive invocations.
The regression test on the said failure: test/Analysis/ScalarEvolution/implied-via-addition.ll
Reviewers: reames, apilipenko, anna, sanjoy
Reviewed By: sanjoy
Subscribers: mzolotukhin, mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D31238
llvm-svn: 299205
Previously compiler often extracted common immediates into specific register, e.g.:
```
%vreg0 = S_MOV_B32 0xff;
%vreg2 = V_AND_B32_e32 %vreg0, %vreg1
%vreg4 = V_AND_B32_e32 %vreg0, %vreg3
```
Because of this SDWA peephole failed to find SDWA convertible pattern. E.g. in previous example this could be converted into 2 SDWA src operands:
```
SDWA src: %vreg2 src_sel:BYTE_0
SDWA src: %vreg4 src_sel:BYTE_0
```
With this change peephole check if operand is either immediate or register that is copy of immediate.
llvm-svn: 299202
Follow up to D25691, this sets up the plumbing necessary to support vector demanded elements support in known bits calculations in target nodes.
Differential Revision: https://reviews.llvm.org/D31249
llvm-svn: 299201
Did you know that 0 is a shifted mask? But 0x0000ff00 and 0x000000ff aren't? At least we get 0xff000000 right.
I only see one usage of this function in the code base today and its in InstCombine. I think its protected against 0 being misreported as a mask. I guess we just don't have tests for the missed cases.
llvm-svn: 299187
Summary:
Triggered by commit r298620: "[LV] Vectorize GEPs".
If we encounter a vector GEP with scalar arguments, we splat the scalar
into a vector of appropriate size before we scatter the argument.
Reviewers: arsenm, mehdi_amini, bkramer
Reviewed By: arsenm
Subscribers: bjope, mssimpso, wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D31416
llvm-svn: 299186
Summary:
Currently Go binding only has SetCurrentDebugLocation method.
I added GetCurrentDebugLocation method to IRBuilder instance.
I added this because I want to save current debug location, change debug location temporary and restore the saved one finally.
This is useful when source location jumps and goes back after while LLVM IR generation.
I also added tests for this to ir_test.go.
I confirmed that all test passed with this patch based on r298890
Patch by Ryuichi Hayashida!
Differential Revision: https://reviews.llvm.org/D31415
llvm-svn: 299185
Matt Arsenault