When debugging test failures with -vv (or -v in the case of the
internal shell), this makes it easier to locate the RUN line that
failed. For example, clang's test/Driver/linux-ld.c has 892 total RUN
lines, and clang's test/Driver/arm-cortex-cpus.c has 424 RUN lines
after concatenation for line continuations.
When reading the generated shell script, this also makes it easier to
locate the RUN line that produced each command.
To support reporting RUN line numbers in the case of the internal
shell, this patch extends the internal shell to support the null
command, ":", except pipelines are not supported.
Reviewed By: asmith, delcypher
Differential Revision: https://reviews.llvm.org/D44598
llvm-svn: 330755
It used to symlink dsymutil to llvm-dsymutil, but after r327790 llvm's dsymutil
binary is now called dsymutil without prefix.
r327792 then reversed the direction of the symlink if
LLVM_INSTALL_CCTOOLS_SYMLINKS was set, but that looks like a buildfix and not
like something anyone should need.
https://reviews.llvm.org/D45966
llvm-svn: 330727
Summary:
This patch removes references to AliasAnalysisCounter pass from the AliasAnalysis documentation. That pass have been eliminated in 2015, at revision trunk@247167.
Reviewed By: hfinkel
Differential Revision: https://reviews.llvm.org/D45876
llvm-svn: 330590
Summary:
In the course of writing an experimental ANTLR grammar based on this
document, I found three errors in the documented BNF:
SimpleValues of dag type are allowed to have no operands at all after
the initial DagArg specifying the operator. For example, the value
(outs) is extremely common in backends; an example in the test suite
is test/TableGen/AsmVariant.td line 30. But the BNF doesn't allow
DagArgList to expand to the empty string (it must contain at least one
DagArg), and therefore the DagArgList specifying the operands in the
dag-shaped production for SimpleValue should be optional.
In the production for BodyItem with a 'let' and an optional RangeList,
the RangeList should have braces around it if it's present, matching
code such as "let E{7-0} = ..." on test/TableGen/BitsInit.td line 42.
Those braces aren't included in the RangeList nonterminal itself, so
instead they need to be part of the optional segment of the BodyItem
production.
Finally, the identifier after 'defm' should be optional. Again, this
is very common in the real back end .td files; an example in the test
suite is in test/TableGen/defmclass.td line 49.
Reviewers: rengolin, nhaehnle, stoklund
Reviewed By: nhaehnle
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45818
llvm-svn: 330570
Should be a harmless trimming of trailing whitespace from a
documentation file.
(There are other instances of trailing whitespace in this file alone.
I've only fixed one of them, on the basis that that way the rest are
still available for other people's commit-access tests :-)
llvm-svn: 330567
This was originally committed at rL328921 and reverted at rL329920 to
investigate failures in Chrome. This time I've added to the ReleaseNotes
to warn users of the potential of exposing UB and let me repeat that
here for more exposure:
Optimization of floating-point casts is improved. This may cause surprising
results for code that is relying on undefined behavior. Code sanitizers can
be used to detect affected patterns such as this:
int main() {
float x = 4294967296.0f;
x = (float)((int)x);
printf("junk in the ftrunc: %f\n", x);
return 0;
}
$ clang -O1 ftrunc.c -fsanitize=undefined ; ./a.out
ftrunc.c:5:15: runtime error: 4.29497e+09 is outside the range of
representable values of type 'int'
junk in the ftrunc: 0.000000
Original commit message:
fptosi / fptoui round towards zero, and that's the same behavior as ISD::FTRUNC,
so replace a pair of casts with the equivalent node. We don't have to account for
special cases (NaN, INF) because out-of-range casts are undefined.
Differential Revision: https://reviews.llvm.org/D44909
llvm-svn: 330437
This is copied from Andrea's text in PR36875:
https://bugs.llvm.org/show_bug.cgi?id=36875
As noted there, this is a hack...but it's a good one!
It's important to show potential workflows up-front
with examples, so customers can copy and experiment
with them.
llvm-svn: 329726
This patch moves the logic that collects and analyzes dispatch events to the
DispatchStatistics view.
Added flag -dispatch-stats to print statistics related to the dispatch logic.
llvm-svn: 329708
This patch teaches llvm-mca how to parse code comments in search for special
"markers" used to select regions of code.
Example:
# LLVM-MCA-BEGIN My Code Region
....
# LLVM-MCA-END
The MCAsmLexer now delegates to an object of class MCACommentParser (i.e. an
AsmCommentConsumer) the parsing of code comments to search for begin/end code
region markers.
A comment starting with substring "LLVM-MCA-BEGIN" marks the beginning of a new
region of code. A comment starting with substring "LLVM-MCA-END" marks the end
of the last region.
This implementation doesn't allow regions to overlap. Each region can have a
optional description; internally, each region is identified by a range of source
code locations (SMLoc).
MCInst objects are added to a region R only if the source location for the
MCInst is in the range of locations specified by R.
By default, the tool allocates an implicit "Default" code region which contains
every source location. See new tests llvm-mca-marker-*.s for a few examples.
A new Backend object is created for every region. So, the analysis is conducted
on every parsed code region. The final report is the union of the reports
generated for every code region. Note that empty regions are skipped.
Special "[#] Code Region - ..." strings are used in the report to mark the
portion which is specific to a code region only. For example, see
llvm-mca-markers-5.s.
Differential Revision: https://reviews.llvm.org/D45433
llvm-svn: 329590
Summary:
The option is helpful for large projects where it's not feasible to specify sources which
user would like to see in the report. Instead, it allows to black-list specific sources via
regular expressions (e.g. now it's possible to skip all files that have "test" in its name).
This also partially fixes https://bugs.llvm.org/show_bug.cgi?id=34277
Reviewers: vsk, morehouse, liaoyuke
Reviewed By: vsk
Subscribers: kcc, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D43907
llvm-svn: 329581
Summary:
This change consolidates the always/never lists that may be provided to
clang to externally control which functions should be XRay instrumented
by imbuing attributes. The files follow the same format as defined in
https://clang.llvm.org/docs/SanitizerSpecialCaseList.html for the
sanitizer blacklist.
We also deprecate the existing `-fxray-instrument-always=` and
`-fxray-instrument-never=` flags, in favour of `-fxray-attr-list=`.
This fixes http://llvm.org/PR34721.
Reviewers: echristo, vlad.tsyrklevich, eugenis
Reviewed By: vlad.tsyrklevich
Subscribers: llvm-commits, cfe-commits
Differential Revision: https://reviews.llvm.org/D45357
llvm-svn: 329543
Scheduling models can now describe processor register files and retire control
units. This updates the existing documentation and the README file.
llvm-svn: 329311
This is done in preparation for D45259.
With D45259, models can specify the size of the reorder buffer, and the retire
throughput directly via tablegen.
llvm-svn: 329274
Summary:
This is a first version of the AMDPAL code conventions.
Further updates will undoubtably be required to fully
document AMDPAL.
Subscribers: nhaehnle, llvm-commits
Differential Revision: https://reviews.llvm.org/D45246
llvm-svn: 329188
Summary:
[llvm-exegesis][RFC] Automatic Measurement of Instruction Latency/Uops
This is the code corresponding to the RFC "llvm-exegesis Automatic Measurement of Instruction Latency/Uops".
The RFC is available on the LLVM mailing lists as well as the following document
for easier reading:
https://docs.google.com/document/d/1QidaJMJUyQdRrFKD66vE1_N55whe0coQ3h1GpFzz27M/edit?usp=sharing
Subscribers: mgorny, gchatelet, orwant, llvm-commits
Differential Revision: https://reviews.llvm.org/D44519
llvm-svn: 329156
Summary:
Introduce the ShadowCallStack function attribute. It's added to
functions compiled with -fsanitize=shadow-call-stack in order to mark
functions to be instrumented by a ShadowCallStack pass to be submitted
in a separate change.
Reviewers: pcc, kcc, kubamracek
Reviewed By: pcc, kcc
Subscribers: cryptoad, mehdi_amini, javed.absar, llvm-commits, kcc
Differential Revision: https://reviews.llvm.org/D44800
llvm-svn: 329108
Before this patch, the "BackendStatistics" view was responsible for printing the
register file usage (as well as many other statistics).
Now users can enable register file usage statistics using the command line flag
`-register-file-stats`. By default, the tool doesn't print register file
statistics.
llvm-svn: 329083
Summary:
A recent addition to Coroutines TS (https://wg21.link/p0913) adds a pre-defined coroutine noop_coroutine that does nothing.
To implement this feature, we implemented an llvm.coro.noop intrinsic that returns a coroutine handle to a coroutine that does nothing when resumed or destroyed.
Reviewers: EricWF, modocache, rnk, lewissbaker
Reviewed By: modocache
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45114
llvm-svn: 328986
When running dsymutil as part of your build system, it can be desirable
for warnings to be part of the end product, rather than just being
emitted to the output stream. This patch upstreams that functionality.
Differential revision: https://reviews.llvm.org/D44639
llvm-svn: 328965
Fixes for "lets" references which should be "let's" in the Kaleidoscope
tutorial.
Patch by: Robin Dupret
Differential Revision: https://reviews.llvm.org/D44990
llvm-svn: 328772
Summary:
As we are only doing X.0.Z releases (not using the minor version), there is no need to keep -X.Y in the version.
Like patch https://reviews.llvm.org/D41808, I propose that we rename libLLVM-7.0svn.so to libLLVM-7svn.so
This patch will also rename downstream libraries like liblldb-7.0 to liblldb-7
Reviewers: axw, beanz, dim, hans
Reviewed By: dim, hans
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D41869
llvm-svn: 328768
Summary:
We previously emulated multi-staged builds using two dockerfiles,
native support from Docker allows us to merge them into one,
simplifying our scripts.
For more details about multi-stage builds, see:
https://docs.docker.com/develop/develop-images/multistage-build/
Reviewers: mehdi_amini, klimek, sammccall
Reviewed By: sammccall
Subscribers: llvm-commits, ioeric, cfe-commits
Differential Revision: https://reviews.llvm.org/D44787
llvm-svn: 328503
Document that flag -resource-pressure can be used to enable/disable the resource
pressure view. This change should have been part of r328305.
llvm-svn: 328492
The goal of this patch is to address most of PR36874. To fully fix PR36874 we
need to split the "InstructionInfo" view from the "SummaryView". That would make
easy to check the latency and rthroughput as well.
The patch reuses all the logic from ResourcePressureView to print out the
"instruction tables".
We have an entry for every instruction in the input sequence. Each entry reports
the theoretical resource pressure distribution. Resource pressure is uniformly
distributed across all the processor resource units of a group.
At the moment, the backend pipeline is not configurable, so the only way to fix
this is by creating a different driver that simply sends instruction events to
the resource pressure view. That means, we don't use the Backend interface.
Instead, it is simpler to just have a different code-path for when flag
-instruction-tables is specified.
Once Clement addresses bug 36663, then we can port the "instruction tables"
logic into a stage of our configurable pipeline.
Updated the BtVer2 test cases (thanks Simon for the help). Now we pass flag
-instruction-tables to each modified test.
Differential Revision: https://reviews.llvm.org/D44839
llvm-svn: 328487
Add two additional implicit arguments for OpenCL for the AMDGPU target using the AMDHSA runtime to support device enqueue.
Differential Revision: https://reviews.llvm.org/D44697
llvm-svn: 328351
- Remove use of the opencl and amdopencl environment member of the target triple for the AMDGPU target.
- Use function attribute to communicate to the AMDGPU backend to add implicit arguments for OpenCL kernels for the AMDHSA OS.
Differential Revision: https://reviews.llvm.org/D43736
llvm-svn: 328349
Sanjay Patel