As was mentioned in comments for D45158,
isPicRel's name does not make much sense,
because what this method does is checks if
we need to create the dynamic relocation or not.
Instead of renaming it to something different,
we can 'isPicRel' completely.
We can reuse the getDynRel method.
They are logically very close, getDynRel can just return
R_*_NONE in case no dynamic relocation should be produced
and that would simplify things and avoid functionality
correlation/duplication with 'isPicRel'.
The patch does this change.
Differential revision: https://reviews.llvm.org/D45248
llvm-svn: 329275
Patch teaches LLD to hint user about -fdebug-types-section flag
if relocation overflow happens in debug section.
Differential revision: https://reviews.llvm.org/D40954
llvm-svn: 328081
This patch adds changes to start supporting the Power 64-Bit ELF V2 ABI.
This includes:
- Changing the ElfSym::GlobalOffsetTable to be named .TOC.
- Creating a GotHeader so the first entry in the .got is .TOC.
- Setting the e_flags to be 1 for ELF V1 and 2 for ELF V2
Differential Revision: https://reviews.llvm.org/D44483
llvm-svn: 327871
This is the same as 327248 except Arm defining _GLOBAL_OFFSET_TABLE_ to
be the base of the .got section as some existing code is relying upon it.
For most Targets the _GLOBAL_OFFSET_TABLE_ symbol is expected to be at
the start of the .got.plt section so that _GLOBAL_OFFSET_TABLE_[0] =
reserved value that is by convention the address of the dynamic section.
Previously we had defined _GLOBAL_OFFSET_TABLE_ as either the start or end
of the .got section with the intention that the .got.plt section would
follow the .got. However this does not always hold with the current
default section ordering so _GLOBAL_OFFSET_TABLE_[0] may not be consistent
with the reserved first entry of the .got.plt.
X86, X86_64 and AArch64 will use the .got.plt. Arm, Mips and Power use .got
Fixes PR36555
Differential Revision: https://reviews.llvm.org/D44259
llvm-svn: 327823
This change broke ARM code that expects to be able to add
_GLOBAL_OFFSET_TABLE_ to the result of an R_ARM_REL32.
I will provide a reproducer on llvm-commits.
llvm-svn: 327688
the start of the .got.plt section so that _GLOBAL_OFFSET_TABLE_[0] =
reserved value that is by convention the address of the dynamic section.
Previously we had defined _GLOBAL_OFFSET_TABLE_ as either the start or end
of the .got section with the intention that the .got.plt section would
follow the .got. However this does not always hold with the current
default section ordering so _GLOBAL_OFFSET_TABLE_[0] may not be consistent
with the reserved first entry of the .got.plt.
X86, X86_64, Arm and AArch64 will use the .got.plt. Mips and Power use .got
Fixes PR36555
Differential Revision: https://reviews.llvm.org/D44259
llvm-svn: 327248
We have a lot of "if (MIPS)" conditions in lld because the MIPS' ABI
is different at various places than other arch's ABIs at where it
don't have to be different, but we at least want to reduce MIPS-ness
from the regular classes.
llvm-svn: 317525
Now that we have only SymbolBody as the symbol class. So, "SymbolBody"
is a bit strange name now. This is a mechanical change generated by
perl -i -pe s/SymbolBody/Symbol/g $(git grep -l SymbolBody lld/ELF lld/COFF)
nd clang-format-diff.
Differential Revision: https://reviews.llvm.org/D39459
llvm-svn: 317370
This change adds initial support for range extension thunks. All thunks must
be created within the first pass so some corner cases are not supported. A
follow up patch will add support for multiple passes.
With this change the existing tests arm-branch-error.s and
arm-thumb-branch-error.s now no longer fail with an out of range branch.
These have been renamed and tests added for the range extension thunk.
Differential Revision: https://reviews.llvm.org/D34691
llvm-svn: 316752
When an OutputSection is larger than the branch range for a Target we
need to place thunks such that they are always in range of their caller,
and sufficiently spaced to maximise the number of callers that can use
the thunk. We use the simple heuristic of placing the
ThunkSection at intervals corresponding to a target specific branch range.
If the OutputSection is small we put the thunks at the end of the executable
sections.
Differential Revision: https://reviews.llvm.org/D34689
llvm-svn: 316751
Summary:
The COFF linker and the ELF linker have long had similar but separate
Error.h and Error.cpp files to implement error handling. This change
introduces new error handling code in Common/ErrorHandler.h, changes the
COFF and ELF linkers to use it, and removes the old, separate
implementations.
Reviewers: ruiu
Reviewed By: ruiu
Subscribers: smeenai, jyknight, emaste, sdardis, nemanjai, nhaehnle, mgorny, javed.absar, kbarton, fedor.sergeev, llvm-commits
Differential Revision: https://reviews.llvm.org/D39259
llvm-svn: 316624
A section was passed to getRelExpr just to create an error message.
But if there's an invalid relocation, we would eventually report it
in relocateOne. So we don't have to pass a section to getRelExpr.
llvm-svn: 315552
We were using uint32_t as the type of relocation kind. It has a
readability issue because what Type really means in `uint32_t Type`
is not obvious. It could be a section type, a symbol type or a
relocation type.
Since we do not do any arithemetic operations on relocation types
(e.g. adding one to R_X86_64_PC32 doesn't make sense), it would be
more natural if they are represented as enums. Unfortunately, that
is not doable because relocation type definitions are spread into
multiple header files.
So I decided to use typedef. This still should be better than the
plain uint32_t because the intended type is now obvious.
llvm-svn: 315525
When parsing linker scripts, LLD previously started with a '.' value of 0,
regardless of the internal default image base for the target, and regardless of
switches such as --image-base. It seems reasonable to use a different image base
value when using linker scripts and --image-base is specified, since otherwise the
switch has no effect. This change does this, as well as removing unnecessary
initialisation of Dot where it is not used.
The default image base should not be used when processing linker
scripts, because this will change the behaviour for existing linker script users,
and potentially result in invalid output being produced, as a subsequent assignment
to Dot could move the location counter backwards. Instead, we maintain the existing
behaviour of starting from 0 if --image-base is not specified.
Reviewers: ruiu
Differential Revision: https://reviews.llvm.org/D38360
llvm-svn: 315293
In preparation for range extension thunks introduce a function that will
check whether a branch identified by a relocation type at a source address
can reach a destination.
For targets where range extension thunks are not supported the function will
return true as it is not expected that branches are out of range. An
implementation has been provided for ARM.
Differential Revision: https://reviews.llvm.org/D34690
llvm-svn: 308188
Add support for the most common SPARC relocations.
Make DT_PLTGOT point to the PLT on SPARC.
Mark the PLT as executable on SPARC.
This adds a basic test that creates a SPARV9 executable
that invokes the exit system call on OpenBSD.
Patch by Mark Kettenis.
Differential Revision: https://reviews.llvm.org/D34618
llvm-svn: 306565
On many architectures gcc and clang will recognize _GLOBAL_OFFSET_TABLE_ - .
and produce a relocation that can be processed without needing to know the
value of _GLOBAL_OFFSET_TABLE_. This is not always the case; for example ARM
gcc produces R_ARM_BASE_PREL but clang produces the more general
R_ARM_REL32 to _GLOBAL_OFFSET_TABLE_. To evaluate this relocation
correctly _GLOBAL_OFFSET_TABLE_ must be defined to be the either the base of
the GOT or end of the GOT dependent on architecture..
If/when llvm-mc is changed to recognize _GLOBAL_OFFSET_TABLE_ - . this
change will not be necessary for new objects. However there may still be
old objects and versions of clang.
Differential Revision: https://reviews.llvm.org/D34355
llvm-svn: 306282
Target.cpp contains code for all the targets that LLD supports. It was
simple and easy, but as the number of supported targets increased,
it got messy.
This patch splits the file into per-target files under ELF/arch directory.
Differential Revision: https://reviews.llvm.org/D34222
llvm-svn: 305565
This feels a bit hackish, but I think it is still an improvement.
The way a tls address is computed in the various architectures is not
that different. For example, for local dynamic we need the base of the
tls (R_TLSLD or R_TLSLD_PC), and the offset of that particular symbol
(R_ABS).
Given the similarity, we can just use the expressions instead of
having two additional target hooks.
llvm-svn: 302279
Previously we silently produced broken output for R_386_GOT32X/R_386_GOT32
relocations if they were used to compute the address of the symbol’s global
offset table entry without base register when position-independent code is disabled.
Situation happened because of recent ABI changes. Released ABI mentions that
R_386_GOT32X can be calculated in a two different ways (so we did not follow ABI here
before this patch), but draft ABI also mentions R_386_GOT32 relocation here.
We should use the same calculations for both relocations.
Problem is that we always calculated them as G + A - GOT (offset from end of GOT),
but for case when PIC is disabled, according to i386 ABI calculation should be G + A,
what should produce just an address in GOT finally.
ABI: https://github.com/hjl-tools/x86-psABI/wiki/intel386-psABI-draft.pdf (p36, p60).
llvm-svn: 299812
Executable sections should not be padded with zero by default. On some
architectures, 0x00 is the start of a valid instruction sequence, so can confuse
disassembly between InputSections (and indeed the start of the next InputSection
in some situations). Further, in the case of misjumps into padding, padding may
start to be executed silently.
On x86, the "0xcc" byte represents the int3 trap instruction. It is a single
byte long so can serve well as padding. This change switches x86 (and x86_64) to
use this value for padding in executable sections, if no linker script directive
overrides it. It also puts the behaviour into place making it easy to change the
behaviour of other targets when desired. I do not know the relevant instruction
sequences for trap instructions on other targets however, so somebody should add
this separately.
Because the old behaviour simply wrote padding in the whole section before
overwriting most of it, this change also modifies the padding algorithm to write
padding only where needed. This in turn has caused a small behaviour change with
regards to what values are written via Fill commands in linker scripts, bringing
it into line with ld.bfd. The fill value is now written starting from the end of
the previous block, which means that it always starts from the first byte of the
fill, whereas the old behaviour meant that the padding sometimes started mid-way
through the fill value. See the test changes for more details.
Reviewed by: ruiu
Differential Revision: https://reviews.llvm.org/D30886
Bugzilla: http://bugs.llvm.org/show_bug.cgi?id=32227
llvm-svn: 299635
Relocations are abstracted as platform-independent R_TLS_* relocations,
so we don't need to check platform-specific ones to see if a relocation
is TLS GD.
llvm-svn: 299614
If relocations don't have addends, addends are embedded in operands.
getImplicitAddend is a function to read addends. Addends can be
negative numbers, so the return type of the function should be a
signed integer type.
llvm-svn: 294253
Thunks are now implemented by redirecting the relocation to the
symbol S, to a symbol TS in a Thunk. The Thunk will transfer control
to S. This has the following implications:
- All the side-effects of Thunks happen within createThunks()
- Thunks are no longer stored in InputSections and Symbols no longer
need to hold a pointer to a Thunk
- The synthetic Thunk sections need to be merged into OutputSections
This implementation is almost a direct conversion of the existing
Thunks with the following exceptions:
- Mips LA25 Thunks are placed before the InputSection that defines
the symbol that needs a Thunk.
- All ARM Thunks are placed at the end of the OutputSection of the
first caller to the Thunk.
Range extension Thunks are not supported yet so it is optimistically
assumed that all Thunks can be reused.
This is a recommit of r293283 with a fixed comparison predicate as
std::merge requires a strict weak ordering.
Differential revision: https://reviews.llvm.org/D29327
llvm-svn: 293757
Thunks are now implemented by redirecting the relocation to the
symbol S, to a symbol TS in a Thunk. The Thunk will transfer control
to S. This has the following implications:
- All the side-effects of Thunks happen within createThunks()
- Thunks are no longer stored in InputSections and Symbols no longer
need to hold a pointer to a Thunk
- The synthetic Thunk sections need to be merged into OutputSections
This implementation is almost a direct conversion of the existing
Thunks with the following exceptions:
- Mips LA25 Thunks are placed before the InputSection that defines
the symbol that needs a Thunk.
- All ARM Thunks are placed at the end of the OutputSection of the
first caller to the Thunk.
Range extension Thunks are not supported yet so it is optimistically
assumed that all Thunks can be reused.
Differential Revision: https://reviews.llvm.org/D29129
llvm-svn: 293283
Mapping symbols allow a mapping symbol aware disassembler to
correctly disassemble the PLT when the code immediately prior to the
PLT is Thumb.
To implement this we add a function to add symbols with local
binding to be defined in SyntheticSymbols.
Differential Revision: https://reviews.llvm.org/D28956
llvm-svn: 293044
A necessary first step towards range extension thunks is to delay
the creation of thunks until the layout of InputSections within
OutputSections has been done.
The change scans the relocations directly from InputSections rather
than looking in the ELF File the InputSection came from. This will
allow a future change to redirect the relocations to symbols defined
by Thunks rather than indirect when resolving relocations.
A side-effect of moving ThunkCreation is that the OutSecOff of
InputSections may change in an OutputSection that contains Thunks.
In well behaved programs thunks are not in OutputSections with
dynamic relocations.
Differential Revision: https://reviews.llvm.org/D28811
llvm-svn: 292359
The i386 glibc ld.so expects the .got.slot entry that is relocated by a
R_386_IRELATIVE relocation to point directly at the ifunc resolver and
not the address of the PLT entry + 6 (thus entering the lazy resolver).
This is also the case for ARM and I suspect it is because these use REL
relocations and can't use the addend field to store the address of the
ifunc resolver. If the lazy resolver is used we get an error message
stating that only R_386_JUMP_SLOT is supported.
As ARM and i386 share the same code, I've removed the ARM specific test
and added a writeIgotPlt() function that by default calls writeGotPlt().
ARM and i386 override this to write the address of the ifunc resolver.
Differential Revision: https://reviews.llvm.org/D27581
llvm-svn: 289198
Offset between beginning of a .got section and _gp symbols used in MIPS
GOT relocations calculations. Usually the expression looks like
VA + Offset - GP, where VA is the .got section address, Offset - offset
of the GOT entry, GP - offset between .got and _gp. Also there two "magic"
symbols _gp_disp and __gnu_local_gp which hold the offset mentioned above.
These symbols might be referenced by MIPS relocations.
Now the linker always defines _gp symbol and uses hardcoded value for
its initialization. So offset between .got and _gp is 0x7ff0. The _gp_disp
and __gnu_local_gp defined if required and initialized by 0x7ff0.
In fact that is not correct because _gp symbol might be defined by a linker
script and holds arbitrary value. In that case we need to use this value
in relocation calculation and initialize _gp_disp and __gnu_local_gp
properly.
The patch fixes the problem and completes fixing the bug #30311.
https://llvm.org/bugs/show_bug.cgi?id=30311
Differential revision: https://reviews.llvm.org/D27036
llvm-svn: 287832
We have different functions to stringize objects to construct
error messages. For InputFile, we have getFilename, and for
InputSection, we have getName. You had to memorize them.
I think this is the case where the function overloading comes in handy.
This patch defines toString() functions that are overloaded for all these
types, so that you just call it in error().
Differential Revision: https://reviews.llvm.org/D27030
llvm-svn: 287787
Align to the large page size (known as a superpage or huge page).
FreeBSD automatically promotes large, superpage-aligned allocations.
Differential Revision: https://reviews.llvm.org/D27042
llvm-svn: 287782
George Rimar