The two changes together weakened the test and caused a regression with division
handling in MSVC mode. They were applied to avoid an assertion being triggered
in the block frequency analysis. However, the underlying problem was simply
being masked rather than solved properly. Address the actual underlying problem
and revert the changes. Rather than analyze the cause of the assertion, the
division failure was assumed to be an overflow.
The underlying issue was a subtle bug in the BB construction in the emission of
the div-by-zero check (WIN__DBZCHK). We did not construct the proper successor
information in the basic blocks, nor did we update the PHIs associated with the
basic block when we split them. This would result in assertions being triggered
in the block frequency analysis pass.
Although the original tests are being removed, the tests themselves performed
very little in terms of validation but merely tested that we did not assert when
generating code. Update this with new tests that actually ensure that we do not
regress on the code generation.
llvm-svn: 263714
This patch adds Cortex-R8 to Target Parser and TableGen.
It also adds CodeGen tests for the build attributes.
Patch by Pablo Barrio.
Differential Revision: http://reviews.llvm.org/D17925
llvm-svn: 263132
The initial change was insufficiently complete for always getting the semantics
of __builtin_longjmp correct. The builtin is translated into a
`tInt_eh_sjlj_longjmp` DAG node. This node set R7 as clobbered. However, the
code would then follow up with a clobber of R11. I had failed to notice the
imp-def,kill on R7 in the isel. Unfortunately, it seems that it is not possible
to conditionalise the Defs list via an !if. Instead, construct a new parallel
WIN node and prefer that when targeting windows. This ensures that we now both
correctly model the __builtin_longjmp as well as construct the frame in a more
ABI conformant manner.
llvm-svn: 263123
WoA uses r11 as the FP even though it is a pure thumb-2 environment in contrast
to AAPCS which states r7. This adjusts __builtin_longjmp to not clobber r7 and
to properly restore the frame pointer on execution.
llvm-svn: 263118
When div+rem calls on the same arguments are found, the ARM back-end merges the
two calls into one __aeabi_divmod call for up to 32-bits values. However,
for 64-bit values, which also have a lib call (__aeabi_ldivmod), it wasn't
merging the calls, and thus calling ldivmod twice and spilling the temporary
results, which generated pretty bad code.
This patch legalises 64-bit lib calls for divmod, so that now all the spilling
and the second call are gone. It also relaxes the DivRem combiner a bit on the
legal type check, since it was already checking for isLegalOrCustom on every
value, so the extra check for isTypeLegal was redundant.
Second attempt, creating TLI.isOperationCustom like isOperationExpand, to make
sure we only emit valid types or the ones that were explicitly marked as custom.
Now, passing check-all and test-suite on x86, ARM and AArch64.
This patch fixes PR17193 (and a long time FIXME in the tests).
llvm-svn: 262738
This test failed in some ARM bots after a divmod change because it was
running on a native llc, instead of targeted one. This makes sure the test
is target-specific (as intended), and also copies to ARM and AArch64
directories. If it is also supposed to work on other architectures, I'll
leave as an exercise to the respective maintainers.
llvm-svn: 262620
When div+rem calls on the same arguments are found, the ARM back-end merges the
two calls into one __aeabi_divmod call for up to 32-bits values. However,
for 64-bit values, which also have a lib call (__aeabi_ldivmod), it wasn't
merging the calls, and thus calling ldivmod twice and spilling the temporary
results, which generated pretty bad code.
This patch legalises 64-bit lib calls for divmod, so that now all the spilling
and the second call are gone. It also relaxes the DivRem combiner a bit on the
legal type check, since it was already checking for isLegalOrCustom on every
value, so the extra check for isTypeLegal was redundant.
This patch fixes PR17193 (and a long time FIXME in the tests).
llvm-svn: 262507
Most of the time ARM has the CCR.UNALIGN_TRP bit set to false which
means that unaligned loads/stores do not trap and even extensive testing
will not catch these bugs. However the multi/double variants are not
affected by this bit and will still trap. In effect a more aggressive
load/store optimization will break existing (bad) code.
These bugs do not necessarily manifest in the broken code where the
misaligned pointer is formed but often later in perfectly legal code
where it is accessed. This means recompiling system libraries (which
have no alignment bugs) with a newer compiler will break existing
applications (with alignment bugs) that worked before.
So (under protest) I implemented this safe mode which limits the
formation of multi/double operations to cases that are not affected by
user code (stack operations like spills/reloads) or cases where the
normal operations trap anyway (floating point load/stores). It is
disabled by default.
Differential Revision: http://reviews.llvm.org/D17015
llvm-svn: 262504
DMB instructions can be expensive, so it's best to avoid them if possible. In
atomicrmw operations there will always be an attempted store so a release
barrier is always needed, but in the cmpxchg case we can delay the DMB until we
know we'll definitely try to perform a store (and so need release semantics).
In the strong cmpxchg case this isn't quite free: we must duplicate the LDREX
instructions to skip the barrier on subsequent iterations. The basic outline
becomes:
ldrex rOld, [rAddr]
cmp rOld, rDesired
bne Ldone
dmb
Lloop:
strex rRes, rNew, [rAddr]
cbz rRes Ldone
ldrex rOld, [rAddr]
cmp rOld, rDesired
beq Lloop
Ldone:
So we'll skip this version for strong operations in "minsize" functions.
llvm-svn: 261568
Certain optimization passes (like globaldce) can prune function
declaration that SjLjEHPrepare assumed would exit when it'd
runOnFunction.
This fixes PR26669.
llvm-svn: 261303
Summary:
Without this, this command
$ llvm-run llc -stop-after machine-cp -o - <( echo '' )
outputs an error, because we close stdout twice -- once when closing the
file opened for "-o", and again when closing outs().
Also clarify in the outs() definition that you can't ever call it if you
want to open your own raw_fd_ostream on stdout.
Reviewers: jroelofs, tstellarAMD
Subscribers: jholewinski, qcolombet, dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D17422
llvm-svn: 261286
Add support for TLS access for Windows on ARM. This generates a similar access
to MSVC for ARM.
The changes to the tablegen data is needed to support loading an external symbol
global that is not for a call. The adjustments to the DAG to DAG transforms are
needed to preserve the 32-bit move.
llvm-svn: 259676
The GNU toolchain emits __aeabi_divmod for soft-divide on ARM cores
which happens to be a lot faster than __divsi3/__modsi3 when the core
has hardware divide instructions. Do the same here.
Fixes PR26450.
llvm-svn: 259657
description and changed the regression test accordingly.
The default configuration of a Cortex-R7 is to implement the
VFPv3-D16 architecture and the feature line as it was is too
restrictive.
llvm-svn: 259480
The basic optimisation was to convert (mul $LHS, $complex_constant) into
roughly "(shl (mul $LHS, $simple_constant), $simple_amt)" when it was expected
to be cheaper. The original logic checks that the mul only has one use (since
we're mangling $complex_constant), but when used in even more complex
addressing modes there may be an outer addition that can pick up the wrong
value too.
I *think* the ARM addressing-mode problem is actually unreachable at the
moment, but that depends on complex assessments of the profitability of
pre-increment addressing modes so I've put a real check in there instead of an
assertion.
llvm-svn: 259228
The trap instruction is emitted as a data-in-text rather
than an instruction. This patch uses the .inst directive
for emitting trap.
Differential Revision: http://reviews.llvm.org/D16684
llvm-svn: 259182
Various bits we want to use the new ABI actually compile with "-arch armv7k
-miphoneos-version-min=9.0". Not ideal, but also not ridiculous given how
slices work.
llvm-svn: 258975
For historic reasons, the behavior of .align differs between targets.
Fortunately, there are alternatives, .p2align and .balign, which make the
interpretation of the parameter explicit, and which behave consistently across
targets.
This patch teaches MC to use .p2align instead of .align, so that people reading
code for multiple architectures don't have to remember which way each platform
does its .align directive.
Differential Revision: http://reviews.llvm.org/D16549
llvm-svn: 258750
This patch was originally committed as r257885, but was reverted due to windows
failures. The cause of these failures has been fixed under r258677, hence
re-committing the original patch.
llvm-svn: 258683
This patch was originally committed as r257884, but was reverted due to windows
failures. The cause of these failures has been fixed under r258677, hence
re-committing the original patch.
llvm-svn: 258682
In the optimizer (GVN etc.) when eliminating redundant nodes with different
flags, the flags are ignored for the purposes of testing for congruence, and
then intersected for the purposes of producing a result that supports the union
of all the uses. This commit makes SelectionDAG's CSE do the same thing,
allowing it to CSE nodes in more cases. This fixes PR26063.
Differential Revision: http://reviews.llvm.org/D15957
llvm-svn: 257940
When we have a single basic block, the explicit copy-back instructions should
be inserted right before the terminator. Before this fix, they were wrongly
placed at the beginning of the basic block.
PR26136
llvm-svn: 257930
# The first commit's message is:
Revert "[ARM] Add DSP build attribute and extension targeting"
This reverts commit b11cc50c0b4a7c8cdb628abc50b7dc226ff583dc.
# This is the 2nd commit message:
Revert "[ARM] Add new system registers to ARMv8-M Baseline/Mainline"
This reverts commit 837d08454e3e5beb8581951ac26b22fa07df3cd5.
llvm-svn: 257916
platforms.
With ELF, the alignment of a global variable in a shared library will
get copied into an executables linked against it, if the executable even
accesss the variable. So, it's not possible to implicitly increase
alignment based on access patterns, or you'll break existing binaries.
This happened to affect libc++'s std::cout symbol, for example. See
thread: http://thread.gmane.org/gmane.comp.compilers.clang.devel/45311
(This is a re-commit of r257719, without the bug reported in
PR26144. I've tweaked the code to not assert-fail in
enforceKnownAlignment when computeKnownBits doesn't recurse far enough
to find the underlying Alloca/GlobalObject value.)
Differential Revision: http://reviews.llvm.org/D16145
llvm-svn: 257902
I originally reapplied this in 257550, but had to revert again due to bot
breakage. The only change in this version is to allow either the TypeSize
or the TypeAllocSize of the variable to be the one represented in debug info
(hopefully in the future we can figure out how to encode the difference).
Additionally, several bot failures following r257550, were due to
optimizer bugs now fixed in r257787 and r257795.
r257550 commit message was:
```
The follow extra changes were made to test cases:
Manually making the variable be the actual type instead of a pointer
to avoid pointer-size differences in generic code:
LLVM :: DebugInfo/Generic/2010-03-24-MemberFn.ll
LLVM :: DebugInfo/Generic/2010-04-06-NestedFnDbgInfo.ll
LLVM :: DebugInfo/Generic/2010-05-03-DisableFramePtr.ll
LLVM :: DebugInfo/Generic/varargs.ll
Delete sizing information from debug info for the same reason
(but the presence of the pointer was important to the test case):
LLVM :: DebugInfo/Generic/restrict.ll
LLVM :: DebugInfo/Generic/tu-composite.ll
LLVM :: Linker/type-unique-type-array-a.ll
LLVM :: Linker/type-unique-simple2.ll
Fixing an incorrect DW_OP_deref
LLVM :: DebugInfo/Generic/2010-05-03-OriginDIE.ll
Fixing a missing DW_OP_deref
LLVM :: DebugInfo/Generic/incorrect-variable-debugloc.ll
Additionally, clang should no longer complain during bootstrap should no
longer happen after r257534.
The original commit message was:
``
Summary:
Teach the Verifier to make sure that the storage size given to llvm.dbg.declare
or the value size given to llvm.dbg.value agree with what is declared in
DebugInfo. This is implicitly assumed in a number of passes (e.g. in SROA).
Additionally this catches a number of common mistakes, such as passing a
pointer when a value was intended or vice versa.
One complication comes from stack coloring which modifies the original IR when
it merges allocas in order to make sure that if AA falls back to the IR it gets
the correct result. However, given this new invariant, indiscriminately
replacing one alloca by a different (differently sized one) is no longer valid.
Fix this by just undefing out any use of the alloca in a dbg.declare in this
case.
Additionally, I had to fix a number of test cases. Of particular note:
- I regenerated dbg-changes-codegen-branch-folding.ll from the given source as
it was affected by the bug fixed in r256077
- two-cus-from-same-file.ll was changed to avoid having a variable-typed debug
variable as that would depend on the target, even though this test is
supposed to be generic
- I had to manually declared size/align for reference type. See also the
discussion for D14275/r253186.
- fpstack-debuginstr-kill.ll required changing `double` to `long double`
- most others were just a question of adding OP_deref
``
```
llvm-svn: 257850
Since r230276, we support an improved legalization for f64->f16,
which goes through a temporary f32, improving codegen when
f32->f16 is legal but not f64->f16. This requires unsafe-fp-math.
However, that legalization assumed that the second step, producing
a pseudo-softened f16, had type i16. That's not true on targets
with illegal i16, such as ARM.
Use the initial f64->f16 result type instead.
llvm-svn: 257794
platforms.
With ELF, the alignment of a global variable in a shared library will
get copied into an executables linked against it, if the executable even
accesss the variable. So, it's not possible to implicitly increase
alignment based on access patterns, or you'll break existing binaries.
This happened to affect libc++'s std::cout symbol, for example. See
thread: http://thread.gmane.org/gmane.comp.compilers.clang.devel/45311
llvm-svn: 257719
Previous implementation in http://reviews.llvm.org/D10522
created external references to __emutls_v.* variables.
Such references are inaccurate and cannot be handled by
all linkers, e.g. Android dynamic and gold linkers for aarch64.
Now a new LowerEmuTLS pass to go through all global variables,
and add emutls_v.* and emutls_t.* variables.
These __emutls* variables have the same linkage and
visibility as the associated user defined TLS variable.
Also removed old code that dump __emutls* variables in AsmPrinter.cpp,
and updated TLS unit tests.
Differential Revision: http://reviews.llvm.org/D15300
llvm-svn: 257718
The follow extra changes were made to test cases:
Manually making the variable be the actual type instead of a pointer
to avoid pointer-size differences in generic code:
LLVM :: DebugInfo/Generic/2010-03-24-MemberFn.ll
LLVM :: DebugInfo/Generic/2010-04-06-NestedFnDbgInfo.ll
LLVM :: DebugInfo/Generic/2010-05-03-DisableFramePtr.ll
LLVM :: DebugInfo/Generic/varargs.ll
Delete sizing information from debug info for the same reason
(but the presence of the pointer was important to the test case):
LLVM :: DebugInfo/Generic/restrict.ll
LLVM :: DebugInfo/Generic/tu-composite.ll
LLVM :: Linker/type-unique-type-array-a.ll
LLVM :: Linker/type-unique-simple2.ll
Fixing an incorrect DW_OP_deref
LLVM :: DebugInfo/Generic/2010-05-03-OriginDIE.ll
Fixing a missing DW_OP_deref
LLVM :: DebugInfo/Generic/incorrect-variable-debugloc.ll
Additionally, clang should no longer complain during bootstrap should no
longer happen after r257534.
The original commit message was:
```
Summary:
Teach the Verifier to make sure that the storage size given to llvm.dbg.declare
or the value size given to llvm.dbg.value agree with what is declared in
DebugInfo. This is implicitly assumed in a number of passes (e.g. in SROA).
Additionally this catches a number of common mistakes, such as passing a
pointer when a value was intended or vice versa.
One complication comes from stack coloring which modifies the original IR when
it merges allocas in order to make sure that if AA falls back to the IR it gets
the correct result. However, given this new invariant, indiscriminately
replacing one alloca by a different (differently sized one) is no longer valid.
Fix this by just undefing out any use of the alloca in a dbg.declare in this
case.
Additionally, I had to fix a number of test cases. Of particular note:
- I regenerated dbg-changes-codegen-branch-folding.ll from the given source as
it was affected by the bug fixed in r256077
- two-cus-from-same-file.ll was changed to avoid having a variable-typed debug
variable as that would depend on the target, even though this test is
supposed to be generic
- I had to manually declared size/align for reference type. See also the
discussion for D14275/r253186.
- fpstack-debuginstr-kill.ll required changing `double` to `long double`
- most others were just a question of adding OP_deref
```
llvm-svn: 257550
Summary:
BFC instructions are available in ARMv6T2 and above.
Reviewers: t.p.northover
Subscribers: aemerson
Differential Revision: http://reviews.llvm.org/D16076
llvm-svn: 257546
VMOVs are not strictly speaking cheap, but they are as expensive as a vector
copy (VORR), so we should prefer rematerialization over splitting when it
applies.
rdar://problem/23754176
llvm-svn: 257545
Summary:
r255334 matches bit-reverse pattern in InstCombine and generates calls to Instrinsic::bitreverse.
RBIT instruction is only available for ARMv6t2 and above. This patch has the intrinsic expanded during legalization for ARMv4 and ARMv5.
Patch by Z. Zheng <zhaoshiz@codeaurora.org>
Reviewers: apazos, jmolloy, weimingz
Subscribers: aemerson, rengolin, llvm-commits
Differential Revision: http://reviews.llvm.org/D15932
llvm-svn: 257188
Summary:
During legalization if i16, do not ASSERTZEXT the result of FP_TO_FP16.
Directly return an FP_TO_FP16 node with return type as the
promote-to-type of i16.
This patch also removes extraneous length check. This legalization
should be valid even if integer and float types are of different
lengths.
This patch breaks a hard-float test for fp16 args. The test is changed
to allow a vmov to zero-out the top bits, and also ensure that the
return value is in an FP register.
Reviewers: ab, jmolloy
Subscribers: srhines, llvm-commits
Differential Revision: http://reviews.llvm.org/D15438
llvm-svn: 257184
Summary:
Teach the Verifier to make sure that the storage size given to llvm.dbg.declare
or the value size given to llvm.dbg.value agree with what is declared in
DebugInfo. This is implicitly assumed in a number of passes (e.g. in SROA).
Additionally this catches a number of common mistakes, such as passing a
pointer when a value was intended or vice versa.
One complication comes from stack coloring which modifies the original IR when
it merges allocas in order to make sure that if AA falls back to the IR it gets
the correct result. However, given this new invariant, indiscriminately
replacing one alloca by a different (differently sized one) is no longer valid.
Fix this by just undefing out any use of the alloca in a dbg.declare in this
case.
Additionally, I had to fix a number of test cases. Of particular note:
- I regenerated dbg-changes-codegen-branch-folding.ll from the given source as
it was affected by the bug fixed in r256077
- two-cus-from-same-file.ll was changed to avoid having a variable-typed debug
variable as that would depend on the target, even though this test is
supposed to be generic
- I had to manually declared size/align for reference type. See also the
discussion for D14275/r253186.
- fpstack-debuginstr-kill.ll required changing `double` to `long double`
- most others were just a question of adding OP_deref
Reviewers: aprantl
Differential Revision: http://reviews.llvm.org/D14276
llvm-svn: 257105
Darwin TLS accesses most closely resemble ELF's general-dynamic situation,
since they have to be able to handle all possible situations. The descriptors
and so on are obviously slightly different though.
llvm-svn: 257039
Summary:
There are a number of files in the tree which have been accidentally checked in with DOS line endings. Convert these to native line endings.
There are also a few files which have DOS line endings on purpose, and I have set the svn:eol-style property to 'CRLF' on those.
Reviewers: joerg, aaron.ballman
Subscribers: aaron.ballman, sanjoy, dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D15848
llvm-svn: 256707
Summary:
r250697 fixed the mapping for ARM mode. We have to do the same for Thumb2 otherwise the same llvm.arm.ssat() will generate different saturating amount for ARM and Thumb.
r250697: http://reviews.llvm.org/rL250697
Reviewers: rmaprath
Subscribers: aemerson, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D15653
llvm-svn: 256115
llc_dwarf adds an mtriple, which forces this to use COFF, causing
the test to fail. Hopefully using regular llc without the triple
will work fine everywhere
llvm-svn: 256084
Summary:
First up is instcombine, where in the dbg.declare -> dbg.value conversion,
the llvm.dbg.value needs to be called on the actual loaded value, rather
than the address (since the whole point of this transformation is to be
able to get rid of the alloca). Further, now that that's cleaned up, we
can remove a hack in the backend, that would add an implicit OP_deref if
the argument to dbg.value was an alloca. This stems from before the
existence of DIExpression and is no longer necessary since the deref can
be expressed explicitly.
Now, in order to make sure that the tests pass with this change, we need to
correct the printing of DEBUG_VALUE comments to take into account the
expression, which wasn't taken into account before.
Unfortunately, for both these changes, there were a number of incorrect
test cases (mostly the wrong number of DW_OP_derefs, but also a couple
where the test itself was broken more badly). aprantl and I have gone
through and adjusted these test case in order to make them pass with
these fixes and in some cases to make sure they're actually testing
what they are meant to test.
Reviewers: aprantl
Subscribers: dsanders
Differential Revision: http://reviews.llvm.org/D14186
llvm-svn: 256077
This is a quick fix to PR25838. The issue comes from the restriction that we
cannot normalize probabilities containing both known and unknown ones. A patch
that removes this restriction is under the review now:
http://reviews.llvm.org/D15548
llvm-svn: 255867
This patch improves a temporary fix in r255530 so that we can normalize
successor list without trigger assertion failures in tail duplication pass.
llvm-svn: 255638
The post-dominance property is not sufficient to guarantee that a restore point
inside a loop is safe.
E.g.,
while(1) {
Save
Restore
if (...)
break;
use/def CSRs
}
All the uses/defs of CSRs are dominated by Save and post-dominated
by Restore. However, the CSRs uses are still reachable after
Restore and before Save are executed.
This fixes PR25824
llvm-svn: 255613
EABI attributes should only be emitted on EABI targets. This prevents the
emission of the optimization goals EABI attribute on Windows ARM.
llvm-svn: 255448
We mutated the DAG, which invalidated the node we were trying to use
as a base register. Sometimes we got away with it, but other times the
node really did get deleted before it was finished with.
Should fix PR25733
llvm-svn: 255120
Otherwise, we think that most types that look like they'd fit in a
legal vector type are legal (so, basically, *any* vector type with a
size between 33 and 128 bits, I think, since we use pow2 alignment;
e.g., v2i25, v3f32, ...).
DataLayout::getTypeAllocSize rounds up based on alignment.
When checking for target intrinsic legality, that's not what we want:
if rounding makes a difference, the type isn't legal, and the
target intrinsics shouldn't be used, as they are always assumed legal.
One could make the argument that alloc size is ultimately the most
relevant here, since we're dealing with LD/ST intrinsics. That's only
true if we did legalize them though; that's a problem for another day.
Use DataLayout::getTypeSizeInBits instead of getTypeAllocSizeInBits.
Type::getSizeInBits can't be used because that'd gratuitously break
pointer vector support.
Some of these uses are currently fine, because we only hit them when
the type is already known legal (e.g., r114454). Update them for
consistency. It's faster to avoid the rounding anyway!
llvm-svn: 255089
Summary:
Before ARMv5T, Thumb1 code could not pop PC, as described at D14357 and D14986;
so we need the special fixup in the epilogue.
Reviewers: jroelofs, qcolombet
Subscribers: aemerson, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D15126
llvm-svn: 255047
It's strange to duplicate the logic for emitting FP values into
emitGlobalConstantDataSequential, and it's even stranger that we end
up printing the verbose assembly comments differently between the two
paths. Just call into emitGlobalConstantFP rather than crudely
duplicating its logic.
llvm-svn: 254988
Summary: This reverts r254234, and adds a simple fix for the annoying case of use-after-free.
Reviewers: rengolin
Subscribers: aemerson, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D15236
llvm-svn: 254912
with its source instead of forcing the values on GPRs.
This improves the lowering of vector code when such bitcasts happen in the
middle of vector computations.
rdar://problem/23691584
llvm-svn: 254684
The ARM ARM is clear that 128-bit loads are only guaranteed to have been atomic
if there has been a corresponding successful stxp. It's less clear for AArch32, so
I'm leaving that alone for now.
llvm-svn: 254524
(This is the second attempt to submit this patch. The first caused two assertion
failures and was reverted. See https://llvm.org/bugs/show_bug.cgi?id=25687)
The patch in http://reviews.llvm.org/D13745 is broken into four parts:
1. New interfaces without functional changes (http://reviews.llvm.org/D13908).
2. Use new interfaces in SelectionDAG, while in other passes treat probabilities
as weights (http://reviews.llvm.org/D14361).
3. Use new interfaces in all other passes.
4. Remove old interfaces.
This patch is 3+4 above. In this patch, MBB won't provide weight-based
interfaces any more, which are totally replaced by probability-based ones.
The interface addSuccessor() is redesigned so that the default probability is
unknown. We allow unknown probabilities but don't allow using it together
with known probabilities in successor list. That is to say, we either have a
list of successors with all known probabilities, or all unknown
probabilities. In the latter case, we assume each successor has 1/N
probability where N is the number of successors. An assertion checks if the
user is attempting to add a successor with the disallowed mixed use as stated
above. This can help us catch many misuses.
All uses of weight-based interfaces are now updated to use probability-based
ones.
Differential revision: http://reviews.llvm.org/D14973
llvm-svn: 254377
and the follow-up r254356: "Fix a bug in MachineBlockPlacement that may cause assertion failure during BranchProbability construction."
Asserts were firing in Chromium builds. See PR25687.
llvm-svn: 254366
The patch in http://reviews.llvm.org/D13745 is broken into four parts:
1. New interfaces without functional changes (http://reviews.llvm.org/D13908).
2. Use new interfaces in SelectionDAG, while in other passes treat probabilities
as weights (http://reviews.llvm.org/D14361).
3. Use new interfaces in all other passes.
4. Remove old interfaces.
This patch is 3+4 above. In this patch, MBB won't provide weight-based
interfaces any more, which are totally replaced by probability-based ones.
The interface addSuccessor() is redesigned so that the default probability is
unknown. We allow unknown probabilities but don't allow using it together
with known probabilities in successor list. That is to say, we either have a
list of successors with all known probabilities, or all unknown
probabilities. In the latter case, we assume each successor has 1/N
probability where N is the number of successors. An assertion checks if the
user is attempting to add a successor with the disallowed mixed use as stated
above. This can help us catch many misuses.
All uses of weight-based interfaces are now updated to use probability-based
ones.
Differential revision: http://reviews.llvm.org/D14973
llvm-svn: 254348
Summary:
Since this build attribute corresponds to a whole module, and
different functions in a module may differ in the optimizations
enabled for them, this attribute is emitted after all functions,
and only in the case that the optimization goals for all
functions match.
Reviewers: logan, hans
Subscribers: aemerson, rengolin, llvm-commits
Differential Revision: http://reviews.llvm.org/D14934
llvm-svn: 254201
Building on r253865 the crash is not limited to signed overflows.
Disable custom handling of unsigned 32-bit and 64-bit integer divide.
Add test cases for both 32-bit and 64-bit unsigned integer overflow.
llvm-svn: 254158
The patch in http://reviews.llvm.org/D13745 is broken into four parts:
1. New interfaces without functional changes.
2. Use new interfaces in SelectionDAG, while in other passes treat probabilities
as weights.
3. Use new interfaces in all other passes.
4. Remove old interfaces.
This the second patch above. In this patch SelectionDAG starts to use
probability-based interfaces in MBB to add successors but other MC passes are
still using weight-based interfaces. Therefore, we need to maintain correct
weight list in MBB even when probability-based interfaces are used. This is
done by updating weight list in probability-based interfaces by treating the
numerator of probabilities as weights. This change affects many test cases
that check successor weight values. I will update those test cases once this
patch looks good to you.
Differential revision: http://reviews.llvm.org/D14361
llvm-svn: 253965
Disable custom handling of signed 32-bit and 64-bit integer divide.
Add test cases for both 32-bit and 64-bit integer overflow crashes.
llvm-svn: 253865
Note, this was reviewed (and more details are in) http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151109/312083.html
These intrinsics currently have an explicit alignment argument which is
required to be a constant integer. It represents the alignment of the
source and dest, and so must be the minimum of those.
This change allows source and dest to each have their own alignments
by using the alignment attribute on their arguments. The alignment
argument itself is removed.
There are a few places in the code for which the code needs to be
checked by an expert as to whether using only src/dest alignment is
safe. For those places, they currently take the minimum of src/dest
alignments which matches the current behaviour.
For example, code which used to read:
call void @llvm.memcpy.p0i8.p0i8.i32(i8* %dest, i8* %src, i32 500, i32 8, i1 false)
will now read:
call void @llvm.memcpy.p0i8.p0i8.i32(i8* align 8 %dest, i8* align 8 %src, i32 500, i1 false)
For out of tree owners, I was able to strip alignment from calls using sed by replacing:
(call.*llvm\.memset.*)i32\ [0-9]*\,\ i1 false\)
with:
$1i1 false)
and similarly for memmove and memcpy.
I then added back in alignment to test cases which needed it.
A similar commit will be made to clang which actually has many differences in alignment as now
IRBuilder can generate different source/dest alignments on calls.
In IRBuilder itself, a new argument was added. Instead of calling:
CreateMemCpy(Dst, Src, getInt64(Size), DstAlign, /* isVolatile */ false)
you now call
CreateMemCpy(Dst, Src, getInt64(Size), DstAlign, SrcAlign, /* isVolatile */ false)
There is a temporary class (IntegerAlignment) which takes the source alignment and rejects
implicit conversion from bool. This is to prevent isVolatile here from passing its default
parameter to the source alignment.
Note, changes in future can now be made to codegen. I didn't change anything here, but this
change should enable better memcpy code sequences.
Reviewed by Hal Finkel.
llvm-svn: 253511
It turns out we decide whether to use SjLj exceptions or some alternative in
two separate places in the backend, and they disagreed with each other. This
led to inconsistent code and is generally a terrible idea.
So make them consistent and add an assert that they *do* match (unfortunately
MCAsmInfo isn't available in opt, so it can't be used to initialise the CodeGen
version directly).
llvm-svn: 253502
If a section is rw, it is irrelevant if the dynamic linker will write to
it or not.
It looks like llvm implemented this because gcc was doing it. It looks
like gcc implemented this in the hope that it would put all the
relocated items close together and speed up the dynamic linker.
There are two problem with this:
* It doesn't work. Both bfd and gold will map .data.rel to .data and
concatenate the input sections in the order they are seen.
* If we want a feature like that, it can be implemented directly in the
linker since it knowns where the dynamic relocations are.
llvm-svn: 253436
Most linked executables do not have a symbol table in COFF.
However, it is pretty typical to have some export entries. Use those
entries to inform the disassembler about potential function definitions
and call targets.
llvm-svn: 253429
The underlying issues surrounding codegen for 32-bit vselects have been resolved. The pessimistic costs for 64-bit vselects remain due to the bad
scalarization that is still happening there.
I tested this on A57 in T32, A32 and A64 modes. I saw no regressions, and some improvements.
From my benchmarks, I saw these improvements in A57 (T32)
spec.cpu2000.ref.177_mesa 5.95%
lnt.SingleSource/Benchmarks/Shootout/strcat 12.93%
lnt.MultiSource/Benchmarks/MiBench/telecomm-CRC32/telecomm-CRC32 11.89%
I also measured A57 A32, A53 T32 and A9 T32 and found no performance regressions. I see much bigger wins in third-party benchmarks with this change
Differential Revision: http://reviews.llvm.org/D14743
llvm-svn: 253349
Several places in AsmPrinter.cpp print comments describing MachineOperand
registers using MCRegisterInfo, which uses MCOperand-oriented names. This
doesn't work for targets that use virtual registers exclusively, as
WebAssembly does, since virtual registers are represented and printed
differently.
This patch preserves what seems to be the spirit of r229978, avoiding the
use of TM.getSubtargetImpl(), while still using MachineOperand-oriented
printing for MachineOperands.
Differential Revision: http://reviews.llvm.org/D14709
llvm-svn: 253338
The way prelink used to work was
* The compiler decides if a given section only has relocations that
are know to point to the same DSO. If so, it names it
.data.rel.ro.local<something>.
* The static linker puts all of these together.
* The prelinker program assigns addresses to each library and resolves
the local relocations.
There are many problems with this:
* It is incompatible with address space randomization.
* The information passed by the compiler is redundant. The linker
knows if a given relocation is in the same DSO or not. If could sort
by that if so desired.
* There are newer ways of speeding up DSO (gnu hash for example).
* Even if we want to implement this again in the compiler, the previous
implementation is pretty broken. It talks about relocations that are
"resolved by the static linker". If they are resolved, there are none
left for the prelinker. What one needs to track is if an expression
will require only dynamic relocations that point to the same DSO.
At this point it looks like the prelinker is an historical curiosity.
For example, fedora has retired it because it failed to build for two
releases
(http://pkgs.fedoraproject.org/cgit/prelink.git/commit/?id=eb43100a8331d91c801ee3dcdb0a0bb9babfdc1f)
This patch removes support for it. That is, it stops printing the
".local" sections.
llvm-svn: 253280
This was left implicit and never ever checked, which means we could have a CMPZ against some non-zero value and we were carrying on with BFI conversion regardless.
Caught by Oliver Stannard using csmith; regression test added.
llvm-svn: 253195
I completely misunderstood what ARMISD::CMPZ means. It's not "compare equal to zero", it's "compare, only setting the zero/Z flag". It can either be equal-to-zero or not-equal-to-zero, and we weren't checking what sense it was.
If it's equal-to-zero, we can swap the operands around and pretend like it is not-equal-to-zero, which is both a bug fix and lets us handle more cases.
llvm-svn: 252891
If we have a chain of BFIs, we may be able to combine several together into one merged BFI. We can do this if the "from" bits from one BFI OR'd with the "from" bits from the other BFI form a contiguous range, and the same with the "to" bits.
llvm-svn: 252740
Added fixes for stage2 failures: CMOV is not commutable; commuting the operands results in the condition being flipped! d'oh!
Original commit message:
If we have a CMOV, OR and AND combination such as:
if (x & CN)
y |= CM;
And:
* CN is a single bit;
* All bits covered by CM are known zero in y;
Then we can convert this to a sequence of BFI instructions. This will always be a win if CM is a single bit, will always be no worse than the TST & OR sequence if CM is two bits, and for thumb will be no worse if CM is three bits (due to the extra IT instruction).
llvm-svn: 252606
"GCC requires the freestanding environment provide memcpy, memmove, memset
and memcmp": https://gcc.gnu.org/onlinedocs/gcc-5.2.0/gcc/Standards.html
Hence in GNUEABI targets LLVM should not convert 'memops' to their equivalent
'__aeabi_memops'. This convertion violates GCC contract.
The -meabi flag controls whether or not LLVM will modify 'memops' in GNUEABI
targets.
Without -meabi: use the triple default EABI.
With -meabi=default: use the triple default EABI.
With -meabi=gnu: use 'memops'.
With -meabi=4 or -meabi=5: use '__aeabi_memops'.
With -meabi set to an unknown value: same as -meabi=default.
Patch by Vinicius Tinti.
llvm-svn: 252462
Tim Northover