If output section which referenced by R_MIPS_GOT_PAGE or R_MIPS_GOT16
relocations is small (less that 0x10000 bytes) and occupies two adjacent
0xffff-bytes pages, current formula gives incorrect number of required "page"
GOT entries. The problem is that in time of calculation we do not know
the section address and so we cannot calculate number of 0xffff-bytes
pages exactly.
This patch fix the formula. Now it gives a correct number of pages in
the worst case when "small" section intersects 0xffff-bytes page
boundary. From the other side, sometimes it adds one more redundant GOT
entry for each output section. But usually number of output sections
referenced by GOT relocations is small.
llvm-svn: 288127
-N (-omagic)
Set the text and data sections to be readable and writable.
Also, do not page-align the data segment.
Differential revision: https://reviews.llvm.org/D26888
llvm-svn: 288123
Right now we just remember a SymbolBody for each got entry and
duplicate a bit of logic to decide what value, if any, should be
written for that SymbolBody.
With ARM there will be more complicated values, and it seems better to
just use the relocation code to fill the got entries. This makes it
clear that each entry is filled by the dynamic linker or by the static
linker.
llvm-svn: 288107
That unifies handling cases when we have SECTIONS and when
-no-rosegment is given in compareSectionsNonScript()
Now Config->SingleRoRx is used for check, testcase is provided.
llvm-svn: 288022
Previously Config->SingleRoRx was set in
createFiles() and used HasSections.
This change moves it to readConfigs at place of
common flags handling, and adds logic that sets
this flag separatelly from ScriptParser if SECTIONS present.
llvm-svn: 288021
--no-rosegment: Do not put read-only non-executable sections in their own segment
Differential revision: https://reviews.llvm.org/D26889
llvm-svn: 288020
Unfortunatelly PT_ARM_EXIDX is special. There is no way to create it
from linker scripts, so we have to create it even if PHDRS is used.
This matches bfd and is required for the lld output to survive bfd's strip.
llvm-svn: 288012
Unfortunatelly some scripts look like
kernphys = ...
. = ....
and the expectation in that every orphan section is after the
assignment.
llvm-svn: 287996
This is an horrible special case, but seems to match bfd's behaviour
and is important for avoiding placing an orphan section before the
expected start of the file.
llvm-svn: 287994
They return new vectors, but at the same time they mutate other vectors,
so returning values doesn't make much sense. We should just mutate two
vectors.
llvm-svn: 287979
-color-diagnostics=auto is default because that's the same as
Clang's default. When color is enabled, error or warning messages
are colored like this.
error:
<bold>ld.lld</bold> <red>error:</red> foo.o: no such file
warning:
<bold>ld.lld</bold> <magenta>warning:</magenta> foo.o: no such file
Differential Revision: https://reviews.llvm.org/D27117
llvm-svn: 287949
Uncompressing section contents and spliting mergeable section contents
into smaller chunks are heavy tasks. They scan entire section contents
and do CPU-intensive tasks such as uncompressing zlib-compressed data
or computing a hash value for each section piece.
Luckily, these tasks are independent to each other, so we can do that
in parallel_for_each. The number of input sections is large (as opposed
to the number of output sections), so there's a large parallelism here.
Actually the current design to call uncompress() and splitIntoPieces()
in batch was chosen with doing this in mind. Basically what we need to
do here is to replace `for` with `parallel_for_each`.
It seems this patch improves latency significantly if linked programs
contain debug info (which in turn contain lots of mergeable strings.)
For example, the latency to link Clang (debug build) improved by 20% on
my machine as shown below. Note that ld.gold took 19.2 seconds to do
the same thing.
Before:
30801.782712 task-clock (msec) # 3.652 CPUs utilized ( +- 2.59% )
104,084 context-switches # 0.003 M/sec ( +- 1.02% )
5,063 cpu-migrations # 0.164 K/sec ( +- 13.66% )
2,528,130 page-faults # 0.082 M/sec ( +- 0.47% )
85,317,809,130 cycles # 2.770 GHz ( +- 2.62% )
67,352,463,373 stalled-cycles-frontend # 78.94% frontend cycles idle ( +- 3.06% )
<not supported> stalled-cycles-backend
44,295,945,493 instructions # 0.52 insns per cycle
# 1.52 stalled cycles per insn ( +- 0.44% )
8,572,384,877 branches # 278.308 M/sec ( +- 0.66% )
141,806,726 branch-misses # 1.65% of all branches ( +- 0.13% )
8.433424003 seconds time elapsed ( +- 1.20% )
After:
35523.764575 task-clock (msec) # 5.265 CPUs utilized ( +- 2.67% )
159,107 context-switches # 0.004 M/sec ( +- 0.48% )
8,123 cpu-migrations # 0.229 K/sec ( +- 23.34% )
2,372,483 page-faults # 0.067 M/sec ( +- 0.36% )
98,395,342,152 cycles # 2.770 GHz ( +- 2.62% )
79,294,670,125 stalled-cycles-frontend # 80.59% frontend cycles idle ( +- 3.03% )
<not supported> stalled-cycles-backend
46,274,151,813 instructions # 0.47 insns per cycle
# 1.71 stalled cycles per insn ( +- 0.47% )
8,987,621,670 branches # 253.003 M/sec ( +- 0.60% )
148,900,624 branch-misses # 1.66% of all branches ( +- 0.27% )
6.747548004 seconds time elapsed ( +- 0.40% )
llvm-svn: 287946
The function was used only within Relocations.cpp, but now we are
using it in many places, so this patch moves it to a file that fits
to the functionality.
llvm-svn: 287943
This is important for cases like:
.sdata : {
*(.got.plt .got)
...
}
That was not supported before as there was no way to get access to
synthetic sections from script.
More details on review page.
Differential revision: https://reviews.llvm.org/D27040
llvm-svn: 287913
This patch changes the error message from
too many errors emitted, stopping now
to
too many errors emitted, stopping now (use -error-limit=0 to see all errors)
Thanks for Sean for the suggestion!
llvm-svn: 287900
The .ARM.exidx table has an entry for each function with the first entry
giving the start address of the function, the table is sorted in ascending
order of function address. Given a PC value, the unwinder will search the
table for the entry that contains the PC value.
If the table entry happens to be the last, the range of the addresses that
the final unwinding table describes will extend to the end of the address
space. To prevent an incorrect address outside the address range of the
program matching the last entry we follow ld.bfd's example and add a
sentinel EXIDX_CANTUNWIND entry at the end of the table. This gives the
final real table entry an upper bound.
In addition the llvm libunwind unwinder currently depends on the presence
of a sentinel entry (PR31091).
Differential revision: https://reviews.llvm.org/D26977
llvm-svn: 287869
rL287555 introduces a link error when building with BUILD_SHARED_LIBS:
undefined reference to llvm::codeview::CVSymbolDumper::dump(),
and more...
The functions are available in libDebugInfoCodeView, from LLVM.
Patch by Visoiu Mistrih Francis!
llvm-svn: 287837
Previously, if a symbol specified by -e or ENTRY() is not found,
we didn't set entry point address. That is incompatible with GNU
because GNU linkers set the first address of .text to entry.
This patch implement that behavior.
llvm-svn: 287836
Offset between beginning of a .got section and _gp symbols used in MIPS
GOT relocations calculations. Usually the expression looks like
VA + Offset - GP, where VA is the .got section address, Offset - offset
of the GOT entry, GP - offset between .got and _gp. Also there two "magic"
symbols _gp_disp and __gnu_local_gp which hold the offset mentioned above.
These symbols might be referenced by MIPS relocations.
Now the linker always defines _gp symbol and uses hardcoded value for
its initialization. So offset between .got and _gp is 0x7ff0. The _gp_disp
and __gnu_local_gp defined if required and initialized by 0x7ff0.
In fact that is not correct because _gp symbol might be defined by a linker
script and holds arbitrary value. In that case we need to use this value
in relocation calculation and initialize _gp_disp and __gnu_local_gp
properly.
The patch fixes the problem and completes fixing the bug #30311.
https://llvm.org/bugs/show_bug.cgi?id=30311
Differential revision: https://reviews.llvm.org/D27036
llvm-svn: 287832
This is in the context of https://llvm.org/bugs/show_bug.cgi?id=31109.
When LLD prints out errors for relocations, it tends to print out
extremely large number of errors (like millions) because it would
print out one error per relocation.
This patch makes LLD bail out if it prints out more than 20 errors.
You can configure the limitation using -error-limit argument.
-error-limit=0 means no limit.
I chose the flag name because Clang has the same feature as -ferror-limit.
"f" doesn't make sense to us, so I omitted it.
Differential Revision: https://reviews.llvm.org/D26981
llvm-svn: 287789
We have different functions to stringize objects to construct
error messages. For InputFile, we have getFilename, and for
InputSection, we have getName. You had to memorize them.
I think this is the case where the function overloading comes in handy.
This patch defines toString() functions that are overloaded for all these
types, so that you just call it in error().
Differential Revision: https://reviews.llvm.org/D27030
llvm-svn: 287787
Align to the large page size (known as a superpage or huge page).
FreeBSD automatically promotes large, superpage-aligned allocations.
Differential Revision: https://reviews.llvm.org/D27042
llvm-svn: 287782
An upcoming change to the image base address for x86-64 (D27042) will
will change some addresses and hence the instruction encodings. We care
about the disassembled instructions, not their encodings.
Differential Revision: https://reviews.llvm.org/D27056
llvm-svn: 287778
There are two ways to set symbol versions. One way is to use symbol
definition file, and the other is to embed version names to symbol
names. In the latter way, symbol name is in the form of `foo@version1`
where `foo` is a real name and `version1` is a version.
We were parsing symbol names in insert(). That seems unnecessarily
too early. We can do it later after we resolve all symbols. Doing it
lazily is a good thing because it makes code easier to read
(because now we have a separate pass to parse symbol names). Also
it could slightly improve performance because if two identical symbols
have versions, we now parse them only once.
llvm-svn: 287741
For now MipsGotSection class is not ready for concurrent access from
multiple threads. The problem is in the getPageEntryOffset method. It
changes state of MipsGotSection object and might be called from
different threads at the same time. So turn Threads off for this target.
It's a temporary solution. The patch fixes MipsGotSection::getPageEntryOffset
is almost ready.
Differential revision: https://reviews.llvm.org/D27035
llvm-svn: 287740
Previously, we stored offsets in string tables to symbols, so
you needed to pass a string table to get a symbol name. This patch
stores const char pointers instead to eliminate the need to pass
a string table.
llvm-svn: 287737
Now that lld switched to lib/LTO, which always calls setDataLayout(),
we don't need this check anymore.
Thanks to Peter for pointing out!
llvm-svn: 287699
GNU LD allows `ASSERT` commands to be in output section descriptions.
Note that LD also mandates that `ASSERT` commands in this context must
end with a semicolon.
llvm-svn: 287677
Some synthetic sections are not derived calsses of SyntehticSection.
They are derived directly from InputSection. For consistencly, we should
use SyntheticSection.
llvm-svn: 287606
If the linker script has SECTIONS, the address computation is now
always done in LinkerScript::assignAddresses, like for any other
section.
Before fixHeaders would do a tentative computation that
assignAddresses would sometimes override.
This patch also splits the cases where assignAddresses needs to add
the headers to the first PT_LOAD and the address computation. The net
effect is that we no longer create an empty page for no reason in the
included test case, which matches bfd behavior.
llvm-svn: 287565
Previously, we discarded .debug$ sections. This patch adds them to
files so that PDB.cpp can access them.
This patch also adds a debug option, /dumppdb, to dump debug info
fed to createPDB so that we can verify that valid data has been passed.
llvm-svn: 287555
LLD's error messages contain line numbers, function names or section names.
Currently they are formatter as follows.
foo.c (32): symbol 'foo' not found
foo.c (function bar): symbol 'foo' not found
foo.c (.text+0x1234): symbol 'foo' not found
This patch changes them so that they are consistent with Clang's output.
foo.c:32: symbol 'foo' not found
foo.c:(function bar): symbol 'foo' not found
foo.c:(.text+0x1234): symbol 'foo' not found
Differential Revision: https://reviews.llvm.org/D26901
llvm-svn: 287537
Previously, we set (uintptr_t)-1 to InputSectionBase::OutSec to record
that a section has already been set to be assigned to some output section
by linker scripts. Later, we restored nullptr to the pointer to use
the field for the original purpose. That overloading is not very easy to
understand.
This patch adds a bit flag for that purpose, so that we don't need
to piggyback the flag on an unrelated pointer.
llvm-svn: 287508
Also this patch uses file-scope functions instead of class member function.
Now that ICF class is not visible from outside, InputSection class
can no longer be "friend" of it. So I removed the friend relation
and just make it expose the features to public.
llvm-svn: 287480
GNU linkers disagree here.
Though both -version and -v are mentioned
in help to print the version information, GNU ld just normally exits,
while gold can continue linking. We are compatible with ld.bfd here.
This fixes PR31057.
Differential revision: https://reviews.llvm.org/D26865
llvm-svn: 287448
readVersionDeclaration was to read anonymous version definition and
named version definition. Splitting it into two functions should
improve readability as the two cases are different enough.
I also changed a few helper functions to return values instead of
mutating given references.
llvm-svn: 287319
MergeOutputSection class was a bit hard to use because it provdes
a series of finalize functions that have to be called in a right way
at a right time. It also intereacted with MergeInputSection, and the
logic was somewhat entangled between the two classes.
This patch simplifies it by providing only one finalize function.
Now, all you have to do is to call MergeOutputSection::finalize
when you have added all sections to the output section. Then, it
internally merges strings and initliazes StringPiece objects.
I think this is much easier to understand.
This patch also adds comments.
llvm-svn: 287314
Since the output has a section table too, it is meaningful to compute
the sh_link. In a more practical note, the binutils' strip crashes if
sh_link is not set for SHT_ARM_EXIDX.
llvm-svn: 287280
I hit an internal linker script that was defining _DYNAMIC instead of
letting the linker do it. It turns out that both bfd and gold allow
that.
This is pretty easy to implement, just make the linker defined symbol
weak. This should have no impact in the case where there is no user
defined symbol: The visibility is hidden, which causes the output to
still be local.
llvm-svn: 287260
Linker script doesn't create a section if it has no content. So the following
script doesn't create .norelocs section if it doesn't have any .rel* sections.
.norelocs : { *(.rel*) }
Later, if you assert that the size of .norelocs is 0, LLD printed out
an error message, because it didn't allow calling SIZEOF() on nonexistent
sections.
This patch allows SIZEOF() on nonexistent sections, so that you can do
something like this.
ASSERT(SIZEOF(.norelocs), "shouldn't contain .rel sections!")
Note that this behavior is compatible with GNU.
Differential Revision: https://reviews.llvm.org/D26810
llvm-svn: 287257
LLD supports multi-threading, and it seems to be working well as
you can see in r287140. In short, LLD runs a few percent to 30%
faster with -threads and more than 50% faster if you are using
-build-id (your mileage may vary depending on your computer).
However, I don't think most users even don't know about that because
-threads is not a default option.
This patch enables it by default.
Discussion thread:
http://lists.llvm.org/pipermail/llvm-dev/2016-November/107160.html
llvm-svn: 287237
This patch updates a couple places where add_dependencies was being explicitly called to add dependencies on intrinsics_gen to instead use the DEPENDS named parameter. This cleanup is needed for a patch I'm working on to add a dependency debugging mode to the build system.
llvm-svn: 287205
We used to create a vector contantaining all version definitions
with wildcards because doing that was efficient. All patterns were
compiled to a regexp and matched against symbol names. Because
a regexp can be converted to a DFA, matching against union of patterns
is as cheap as matching against one patter.
We are no longer converting them to regexp. Our own glob pattern
handler doesn't do such optimization. Therefore, creating a vector
no longer makes sense.
llvm-svn: 287196
MIPS GOT handling is very different from other targets so it is better
to keep the code in the separatre section class MipsGotSection. This
patch introduces the new section and moves all MIPS specific code from
GotSection to the new class. I did not rename fields and methods in the
MipsGotSection class to reduce the diff and plan to do that by the
separate commit.
Differential revision: https://reviews.llvm.org/D26733
llvm-svn: 287150
Apparently this is wrong because it's legal to have a filename
on UNIX which contains a backslash.
Differential Revision: https://reviews.llvm.org/D26734
llvm-svn: 287143
This change separates all versioned locals to be a separate list in config,
that was suggested by Rafael and simplifies the logic a bit.
Differential revision: https://reviews.llvm.org/D26754
llvm-svn: 287132
Our build-id is a tree hash anyway, so I'll define this as a synonym
for sha1. GNU gold takes this parameter, so this is for compatibility
with that.
llvm-svn: 287119
This seems far more natural. A user can create larger chunks if the
overhead is too large.
With this linking xul with "--threads --build-id=sha1 goes from
13.938177535 to 11.035953538 seconds on linux.
llvm-svn: 287042
createManifestRes was generating a MemoryBuffer from a TemporaryFile,
keeping the data but removing the file, before passing the file path
to CVTRES.exe, leading to the following error:
CVTRES : fatal error CVT1101: cannot open 'C:\Users\user\AppData\
Local\Temp\lld-output-resource-bfee19.res' for reading
With this, we instead create a new TemporaryFile before passing it to cvtres.
Patch from Rudy Pons!
llvm-svn: 287034
The code to handle symbol versions is getting tricky and hard to
understand, so it is probably time to simplify it. This patch does
the following.
- Add `DemangledSyms` variable to SymbolTable so that we don't
need to pass it around to findDemangled.
- Define `initDemangledSyms` to initialize the variable lazily.
- hasExternCpp is removed because we no longer have to initialize
the map eagerly.
- scanScriptVersion is split.
- Comments are updated.
llvm-svn: 287002
This patch introduces the following changes:
- DynamicSection now inherits InputSection<ELFT> and was moved
to SyntheticSections.h/.cpp.
- Link and Entsize fields of DynamicSection are propagated to
its output section
- In<ELFT>::SyntheticSections was removed.
- Finalization of synthetic sections was removed from
OutputSection<ELFT>::finalize. Now finalizeSyntheticSections is
used instead.
Differential revision: https://reviews.llvm.org/D26603
llvm-svn: 286950
This patch stops creating symbols like __ehdr_start,
_end/_etext_edata,__tls_get_addr when using -r.
This fixes PR30984.
Differential revision: https://reviews.llvm.org/D26600
llvm-svn: 286941
Patch adds a filename to that error message.
I faced next error when debugged one of FreeBSD port:
error: relocation R_X86_64_PLT32 cannot refer to absolute symbol __tls_get_addr
error message was poor and this patch improves it to show the locations
of symbol declaration and using.
Differential revision: https://reviews.llvm.org/D26508
llvm-svn: 286940
Found this when tried to link lang/ccl FreeBSD port.
Issue is very close to D23201.
This is the reason of lang/ccl port link fail.
GNU assembler 2.17.50 [FreeBSD] 2007-07-03 could generate broken objects,
where notype symbols are associated with symtab:
...
[ 9] .symtab SYMTAB 0000000000000000 00003c78
0000000000006858 0000000000000018 10 803 8
...
192: 000000000000000d 0 NOTYPE LOCAL DEFAULT 9 _cons_org
Patch allows to handle such objects.
Differential revision: https://reviews.llvm.org/D26613
llvm-svn: 286939
Summary:
getFile() can return nullptr. This usually happens when Rels is empty so
the reference is never used. Still UBSAN complains.
Reviewers: rafael
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D26662
llvm-svn: 286937
Object files compiled with cl.exe /GL contain intermediate code for LTO.
We can't (and don't want to) interpret such code, but we should print
out a user-friendly error message.
Differential Revision: https://reviews.llvm.org/D26647
llvm-svn: 286921
I don't really understand what is failing on lld-x86_64-darwin13 bot,
but this patch should at least reduces the number of moving parts.
llvm-svn: 286876
Propagate program headers by walking the commands, not the
sections. This allows us to propagate program headers even from
sections that don't end up in the output.
Fixes pr30997.
llvm-svn: 286837
-M, --print-map Write map file on standard output
-Map MAPFILENAME Write map file
--cref Output cross reference table
This is relative to PR30973.
Next FreeBSD ports were atm failing because of
lack of -Map, -M and --cref:
sysutils/openipmi
emulators/adamem
devel/jwasm
net/pimd
devel/k8048
textproc/libcrm114
lang/micropython
net/mrouted
print/openprinting
After this patch all of them can be link fine.
llvm-svn: 286831
Previously we did not support anything except "local: *", patch changes that.
Actually GNU rules of proccessing wildcards are more complex than that (http://www.airs.com/blog/archives/300):
There are 2 iteration for wildcards, at first iteration "*" wildcards are ignored and handled at second iteration.
Since we previously decided not to implement such complex rules,
I suggest solution that is implemented in this patch. So for "local: *" case nothing changes,
but if we have wildcarded locals,
they are processed before wildcarded globals.
This should fix several FreeBSD ports, one of them is jpeg-turbo-1.5.1 and
currently blocks about 5k of ports.
Differential revision: https://reviews.llvm.org/D26395
llvm-svn: 286713
Unlike gold, bfd, gas or MC we were putting exidx sections first since
they are ro.
The spec doesn't explicitly say that they must come after, but it is
definitely more convenient for the consumer, matches other producers
and matches other areas in ELF (like SHT_GROUP) where sections are
ordered in a natural way.
llvm-svn: 286659
We would create a MergeInputSection for the synthetic .comment and
crash trying to add it to a regular output section.
With this we just don't add the synthetic section with -r. That is
consistent with gold that doesn't create .note.gnu.gold-version with
-r.
llvm-svn: 286635
The functions getBitcodeTargetTriple(), isBitcodeContainingObjCCategory(),
getBitcodeProducerString() and hasGlobalValueSummary() now return errors
via their return value rather than via the diagnostic handler.
To make this work, re-implement these functions using non-member functions
so that they can be used without the LLVMContext required by BitcodeReader.
Differential Revision: https://reviews.llvm.org/D26532
llvm-svn: 286623
The change in D26502 splits ReaderWriter.h, which contains the APIs
into both the BitReader and BitWriter libraries, into BitcodeReader.h
and BitcodeWriter.h.
Change lld uses to the appropriate split header, removing it
completely in one case where it wasn't needed.
llvm-svn: 286568
This is forcing to use Error::success(), which is in a wide majority
of cases a lot more readable.
Differential Revision: https://reviews.llvm.org/D26481
llvm-svn: 286561
The previous code didn't make sense at all. Now an error condition
is handled with fatal(). Thanks to Mehdi for pointing out the issue.
llvm-svn: 286547
The MSVC linker relies on this invariant to produce a valid import
table. More ASan tests pass in a stage 2 build now. They still fail when
using LLD since there are no PDBs for the dynamic ASan runtime.
llvm-svn: 286499
Summary:
This patch adds a ".comment" section to an output. The comment
section contains the linker's version string. You can now
find out whether a binary is created by LLD or not using objdump
command like this.
$ objdump -s -j .comment foo
foo: file format elf64-x86-64
Contents of section .comment:
0000 00474343 3a202855 62756e74 7520342e .GCC: (Ubuntu 4.
0010 382e342d 32756275 6e747531 7e31342e 8.4-2ubuntu1~14.
...
00c0 766d2f74 72756e6b 20323835 38343629 vm/trunk 285846)
00d0 004c696e 6b65723a 204c4c44 20342e30 .Linker: LLD 4.0
00e0 2e302028 7472756e 6b203238 36343036 .0 (trunk 286406
00f0 2900 ).
Compilers emits .comment section as well, so the output contains
both compiler and linker information.
Alternative considered:
I first tried to add a SHT_NOTE section because GNU gold does that.
A NOTE section starts with a header which contains content type.
It turned out that ld.gold sets type NT_GNU_GOLD_VERSION to their
NOTE section. So the NOTE type is only for GNU gold (surprise!)
Next, I tried to create ".linker-version" section. However, it seems
that reusing the existing ".comment" section is better because 1)
other tools already know about .comment section and is able to strip
it and 2) the result contans not only linker info but also compiler
info.
Differential Revision: https://reviews.llvm.org/D26487
llvm-svn: 286496
In a non-LTO build is a nop. In a LTO build, we deallocate/destroy
managed static and this allows us to get the output of, e.g.,
-time-passes without performing a full shutdown.
Differential Revision: https://reviews.llvm.org/D26517
llvm-svn: 286493
Relocations are the last thing that we wore storing a raw section
pointer to and parsing on demand.
With this patch we parse it only once and store a pointer to the
actual data.
The patch also changes where we store it. It is now in
InputSectionBase. Not all sections have relocations, but most do and
this simplifies the logic. It also means that we now only support one
relocation section per section. Given that that constraint is
maintained even with -r with gold bfd and lld, I think it is OK.
llvm-svn: 286459
Though the patch was technically correct,
the only FreeBSD port (noticed atm) that tried using it was
www/mod_jk. And it seems just passed gcc option to linker by mistake:
"-Wl,-L-L/usr/local/lib -Wl,-rpath,/usr/local/lib -Wl,-fstack-protector -Wl,-fstack-protector -o mod_jk.la "
Given that it is an easy mistake to make, reverting for now.
llvm-svn: 286458
Patch allows to pass a symbols file to linker.
LLD will map symbols to sections and sort sections
in output according to symbol ordering file.
That can help to reduce the startup time and/or
amount of pagefaults during startup.
Also, interesting benchmark result was produced by Rafael Espíndola.
After applying the symbols file for clang he timed compiling
X86MCTargetDesc.ii to an object file.
The page faults went from just
56,988 to 56,946 since most faults are not in the binary.
Running time went from 4.403053515 to 4.178112244.
The speedup seems to be because of better cache
locality.
Differential revision: https://reviews.llvm.org/D26130
llvm-svn: 286440
The disadvantage is that we use uint64_t instad of uint32_t for some
value in 32 bit files. The advantage is a substantially simpler code,
faster builds and less code duplication.
llvm-svn: 286414
Previously, we have both input and output section for .MIPS.abiflags.
Now we have only one class for .MIPS.abiflags, which is MipsAbiFlagsSection.
This class is a synthetic input section.
.MIPS.abiflags sections are handled as regular sections until
the control reaches Writer. Writer then aggregates all sections
whose type is SHT_MIPS_ABIFLAGS to create a single synthesized
input section. The synthesized section is then processed normally
as if it came from an input file.
llvm-svn: 286398
Previously, we have both input and output sections for .reginfo and
.MIPS.options. Now for each such sections we have one synthetic input
sections: MipsReginfoSection and MipsOptionsSection respectively.
Both sections are handled as regular sections until the control reaches
Writer. Writer then aggregates all sections whose type is SHT_MIPS_REGINFO
or SHT_MIPS_OPTIONS to create a single synthesized input section. In that
moment Writer also save GP0 value to the MipsGp0 field of the corresponding
ObjectFile. This value required for R_MIPS_GPREL16 and R_MIPS_GPREL32
relocations calculation.
Differential revision: https://reviews.llvm.org/D26444
llvm-svn: 286397
During link of devel/chrpath (FreeBSD port), found next issue:
/usr/bin/ld: error: unclosed comment in a linker script
/usr/bin/ld: error: line 1: unknown directive: �
/usr/bin/ld: error: ��
Problem was not obvious and the reason was that we did not accept
the separate form of -R. While invocation line contained it:
cc -Wl,-R /usr/local/lib -o prog prog.c
CPIO file produced contained /usr/local/lib file.
Which looks because of reasons above
contained inside the content of whole lib folder,
and it then was passed as an input and
proccessed as linker script.
llvm-svn: 286378
Simon Atanasyan