The coalescer is supposed to clean these up, but when setting up parameters
for a function call, there may be copies to physregs. If the defining
instruction has been LICM'ed far away, the coalescer won't touch it.
The register allocation hint does not always work - when the register
allocator is backtracking, it clears the hints.
This patch takes care of a few more cases that r90163 missed.
llvm-svn: 90502
both source operands. In the canonical form, the 2nd operand is changed to an
undef and the shuffle mask is adjusted to only reference elements from the 1st
operand. Radar 7434842.
llvm-svn: 90417
- A valno should be set HasRedefByEC if there is an early clobber def in the middle of its live ranges. It should not be set if the def of the valno is defined by an early clobber.
- If a physical register def is tied to an use and it's an early clobber, it just means the HasRedefByEC is set since it's still one continuous live range.
- Add a couple of missing checks for HasRedefByEC in the coalescer. In general, it should not coalesce a vr with a physical register if the physical register has a early clobber def somewhere. This is overly conservative but that's the price for using such a nasty inline asm "feature".
llvm-svn: 90269
This means that well connected blocks are copy coalesced before the less connected blocks. Connected blocks are more difficult to
coalesce because intervals are more complicated, so handling them first gives a greater chance of success.
llvm-svn: 90194
This helps us avoid silly copies when rematting values that are copied to a physical register:
leaq _.str44(%rip), %rcx
movq %rcx, %rsi
call _strcmp
becomes:
leaq _.str44(%rip), %rsi
call _strcmp
The coalescer will not touch the movq because that would tie down the physical register.
llvm-svn: 90163
more. Update the syntax we're checking for and filecheckize it too.
This will fix the selfhost buildbots but will 'break' the others (sigh) because
they're still linked against older LLVM which is emitting less optimized IR.
llvm-svn: 90104
handle cases like this:
void test(int N, double* G) {
long j;
for (j = 1; j < N - 1; j++)
G[j+1] = G[j] + G[j+1];
}
where G[1] isn't live into the loop.
llvm-svn: 90041
translation of add with immediate. This allows us
to optimize this function:
void test(int N, double* G) {
long j;
G[1] = 1;
for (j = 1; j < N - 1; j++)
G[j+1] = G[j] + G[j+1];
}
to only do one load every iteration of the loop.
llvm-svn: 90013
array indexes. The "complex" case of SRoA still handles them, and correctly.
This fixes a weirdness where we'd correctly avoid transforming A[0][42] if
the 42 was too large, but we'd only do it if it was one gep, not two separate
ones.
llvm-svn: 90007
the problem only shows for msp430 and pic16 which is why it specifies
them using -march. But it is wrong to put such tests in CodeGen/Generic,
since not everyone builds these targets. Put a copy of the test in each
of the target test directories.
llvm-svn: 90005
generates store to undef and some generates store to null as the idiom
for undefined behavior. Since simplifycfg zaps both, don't remove the
undefined behavior in instcombine.
llvm-svn: 89971
first expression as P+4+4*i which we considered to possibly alias
P+4*j. Now we correctly analyze the former one as P+1+4*i.
@test10 is a sanity test that verfies that we know that P+4+4*i != P+4*i.
llvm-svn: 89960
This violates the ABI (that area is "reserved"), and
while it is safe if all code is generated with current
compilers, there is some very old code around that uses
that slot for something else, and breaks if it is stored
into. Adjust testcases looking for current behavior.
I've verified that the stack frame size is right in all
testcases, whether it changed or not. 7311323.
llvm-svn: 89811
than doing the same via constpool:
1. Load from constpool costs 3 cycles on A9, movt/movw pair - just 2.
2. Load from constpool might stall up to 300 cycles due to cache miss.
3. Movt/movw does not use load/store unit.
4. Less constpool entries => better compiler performance.
This is only enabled on ELF systems, since darwin does not have needed
relocations (yet).
llvm-svn: 89720
ConstantExpr, not just the top-level operator. This allows it to
fold many more constants.
Also, make GlobalOpt call ConstantFoldConstantExpression on
GlobalVariable initializers.
llvm-svn: 89659
values, resolving references to them, and then removing the definitions.
If a template argument is set to an undefined value, we need to resolve
references to that argument to an explicit undefined value. The current code
leaves the reference to the template argument as it is, which causes an
assertion failure later when the definition of the template argument is
removed.
llvm-svn: 89581
it may be used in contexts where preheader insertion may have failed due
to an indirectbr.
Make LoopSimplify's LoopSimplify::SeparateNestedLoop properly fail in
the case that it would require splitting an indirectbr edge.
These fix PR5502.
llvm-svn: 89484
which was an expensive checks failure due to a bug in the checking. This
patch in essence reverts the original fix for PR3393, and refixes it by a
tweak to the way expensive checking is done.
llvm-svn: 89454
if it is not ultimately captured. Teach BasicAliasAnalysis that a
local object address which does not escape and is never stored does
not alias with a value resulting from a load.
llvm-svn: 89398
they are lowered to instruction sequences more complex than a simple
load, such that CodeGen cannot rematerialize them, a reload from a
spill slot is likely to be cheaper than the complex sequence.
llvm-svn: 89374
When TwoAddressInstructionPass deletes a dead instruction, make sure that all
register kills are accounted for. The 2-addr register does not get special
treatment.
llvm-svn: 89246
The local register allocator doesn't like it when LiveVariables is run.
We should also disable edge splitting under -O0, but that has to wait a bit.
llvm-svn: 89125
address space (though it only uses a small fraction of that), and the
buildbots disallow that.
Also add a comment to the Makefile's ulimit line warning future
developers that changing it won't work.
llvm-svn: 88994
The large code model is documented at
http://www.x86-64.org/documentation/abi.pdf and says that calls should
assume their target doesn't live within the 32-bit pc-relative offset
that fits in the call instruction.
To do this, we turn off the global-address->target-global-address
conversion in X86TargetLowering::LowerCall(). The first attempt at
this broke the lazy JIT because it can separate the movabs(imm->reg)
from the actual call instruction. The lazy JIT receives the address of
the movabs as a relocation and needs to record the return address from
the call; and then when that call happens, it needs to patch the
movabs with the newly-compiled target. We could thread the call
instruction into the relocation and record the movabs<->call mapping
explicitly, but that seems to require at least as much new
complication in the code generator as this change.
To fix this, we make lazy functions _always_ go through a call
stub. You'd think we'd only have to force lazy calls through a stub on
difficult platforms, but that turns out to break indirect calls
through a function pointer. The right fix for that is to distinguish
between calls and address-of operations on uncompiled functions, but
that's complex enough to leave for someone else to do.
Another attempt at this defined a new CALL64i pseudo-instruction,
which expanded to a 2-instruction sequence in the assembly output and
was special-cased in the X86CodeEmitter's emitInstruction()
function. That broke indirect calls in the same way as above.
This patch also removes a hack forcing Darwin to the small code model.
Without far-call-stubs, the small code model requires things of the
JITMemoryManager that the DefaultJITMemoryManager can't provide.
Thanks to echristo for lots of testing!
llvm-svn: 88984
Have the asm printer emit a comment if an instruction is a spill or
reload and have the spiller mark copies it introdues so the asm printer
can also annotate those.
llvm-svn: 88911
code-size win, and not when it's only likely to be code-size neutral,
such as when only a single instruction would be eliminated and a new
branch would be required.
This fixes rdar://7392894.
llvm-svn: 88692
D0<def,dead> = ...
...
= S0<use, kill>
S0<def> = ...
...
D0<def> =
The first D0 def is correctly marked dead, however, livevariables should have
added an implicit def of S0 or we end up with a use without a def.
llvm-svn: 88690
running IPSCCP early, and we run functionattrs interlaced with the inliner,
we often (particularly for small or noop functions) completely propagate
all of the information about a call to its call site in IPSSCP (making a call
dead) and functionattrs is smart enough to realize that the function is
readonly (because it is interlaced with inliner).
To improve compile time and make the inliner threshold more accurate, realize
that we don't have to inline dead readonly function calls. Instead, just
delete the call. This happens all the time for C++ codes, here are some
counters from opt/llvm-ld counting the number of times calls were deleted vs
inlined on various apps:
Tramp3d opt:
5033 inline - Number of call sites deleted, not inlined
24596 inline - Number of functions inlined
llvm-ld:
667 inline - Number of functions deleted because all callers found
699 inline - Number of functions inlined
483.xalancbmk opt:
8096 inline - Number of call sites deleted, not inlined
62528 inline - Number of functions inlined
llvm-ld:
217 inline - Number of allocas merged together
2158 inline - Number of functions inlined
471.omnetpp:
331 inline - Number of call sites deleted, not inlined
8981 inline - Number of functions inlined
llvm-ld:
171 inline - Number of functions deleted because all callers found
629 inline - Number of functions inlined
Deleting a call is much faster than inlining it, and is insensitive to the
size of the callee. :)
llvm-svn: 86975
cannot be folded into target cmp instruction.
- Avoid a phase ordering issue where early cmp optimization would prevent the
later count-to-zero optimization.
- Add missing checks which could cause LSR to reuse stride that does not have
users.
- Fix a bug in count-to-zero optimization code which failed to find the pre-inc
iv's phi node.
- Remove, tighten, loosen some incorrect checks disable valid transformations.
- Quite a bit of code clean up.
llvm-svn: 86969
tail merging support to handle more cases.
- Recognize several cases where tail merging is beneficial even when
the tail size is smaller than the generic threshold.
- Make use of MachineInstrDesc::isBarrier to help detect
non-fallthrough blocks.
- Check for and avoid disrupting fall-through edges in more cases.
llvm-svn: 86871
llvm.invariant.start to be used without necessarily being paired with a call
to llvm.invariant.end. If you run the entire optimization pipeline then such
calls are in fact deleted (adce does it), but that's actually a good thing since
we probably do want them to be zapped late in the game. There should really be
an integration test that checks that the llvm.invariant.start call lasts long
enough that all passes that do interesting things with it get to do their stuff
before it is deleted. But since no passes do anything interesting with it yet
this will have to wait for later.
llvm-svn: 86840
constant whose component type is not a legal type for the target.
(If the target ConstantPool cannot handle this type either, it has
an opportunity to merge elements. In practice any target with
8-bit bytes must support i8 *as data*). 7320806 (partial).
llvm-svn: 86751
generates a sequence similar to this:
__Z4funci:
LFB2:
mflr r0
LCFI0:
stmw r30,-8(r1)
LCFI1:
stw r0,8(r1)
LCFI2:
stwu r1,-80(r1)
LCFI3:
mr r30,r1
LCFI4:
where LCFI3 and LCFI4 are used by the FDE to indicate what the FP, LR, and other
things are. We generated something more like this:
Leh_func_begin1:
mflr r0
stw r31, 20(r1)
stw r0, 8(r1)
Llabel1:
stwu r1, -80(r1)
Llabel2:
mr r31, r1
Note that we are missing the "mr" instruction. This patch makes it more like the
GCC output.
llvm-svn: 86729
debug intrinsics, and an unconditional branch when possible. This
reuses the TryToSimplifyUncondBranchFromEmptyBlock function split
out of simplifycfg.
llvm-svn: 86722
just one level deep. On the testcase we go from getting this:
F1: ; preds = %T2
%F = and i1 true, %cond ; <i1> [#uses=1]
br i1 %F, label %X, label %Y
to a fully threaded:
F1: ; preds = %T2
br label %Y
This changes gets us to the point where we're forming (too many) switch
instructions on doug's strswitch testcase.
llvm-svn: 86646
the loop. This is needed because with indirectbr it may not be possible
for LoopSimplify to guarantee that all loop exit predecessors are
inside the loop. This fixes PR5437.
LCCSA no longer actually requires LoopSimplify form, but for now it
must still have the dependency because the PassManager doesn't know
how to schedule LoopSimplify otherwise.
llvm-svn: 86569
here:
1) We need to avoid processing sigma nodes as phi nodes for constraint generation.
2) We need to generate constraints for comparisons against constants properly.
This includes our first working ABCD test!
llvm-svn: 86498
when both the source and dest are illegal types, since it would cause
the phi to grow (for example, we shouldn't transform test14b's phi to
a phi on i320). This fixes an infinite loop on i686 bootstrap with
phi slicing turned on, so turn it back on.
llvm-svn: 86483
Also, fix a few other details of the cmake test target and rename it to
'check'. CMake tests now work for the most part, but there are a handful of
failures left due to missing site.exp bits.
llvm-svn: 86452
not turn a PHI in a legal type into a PHI of an illegal type, and
add a new optimization that breaks up insane integer PHI nodes into
small pieces (PR3451).
llvm-svn: 86443
1. rename the movhp patfrag to movlhps, since thats what it actually matches
2. eliminate the bogus movhps load and store patterns, they were incorrect. The load transforms are already handled (correctly) by shufps/unpack.
3. revert a recent test change to its correct form.
llvm-svn: 86415
(eliminating some extends) if the new type of the
computation is legal or if both the source and dest
are illegal. This prevents instcombine from changing big
chains of computation into i64 on 32-bit targets for
example.
llvm-svn: 86398
except it doesn't care if the definitions' virtual registers differ. This is
used by machine LICM and other MI passes to perform CSE.
- Teach Thumb2InstrInfo::isIdentical() to check two t2LDRpci_pic are identical.
Since pc relative constantpool entries are always different, this requires it
it check if the values can actually the same.
llvm-svn: 86328
Here is the original commit message:
This commit updates malloc optimizations to operate on malloc calls that have constant int size arguments.
Update CreateMalloc so that its callers specify the size to allocate:
MallocInst-autoupgrade users use non-TargetData-computed allocation sizes.
Optimization uses use TargetData to compute the allocation size.
Now that malloc calls can have constant sizes, update isArrayMallocHelper() to use TargetData to determine the size of the malloced type and the size of malloced arrays.
Extend getMallocType() to support malloc calls that have non-bitcast uses.
Update OptimizeGlobalAddressOfMalloc() to optimize malloc calls that have non-bitcast uses. The bitcast use of a malloc call has to be treated specially here because the uses of the bitcast need to be replaced and the bitcast needs to be erased (just like the malloc call) for OptimizeGlobalAddressOfMalloc() to work correctly.
Update PerformHeapAllocSRoA() to optimize malloc calls that have non-bitcast uses. The bitcast use of the malloc is not handled specially here because ReplaceUsesOfMallocWithGlobal replaces through the bitcast use.
Update OptimizeOnceStoredGlobal() to not care about the malloc calls' bitcast use.
Update all globalopt malloc tests to not rely on autoupgraded-MallocInsts, but instead use explicit malloc calls with correct allocation sizes.
llvm-svn: 86311
load of a GV from constantpool and then add pc. It allows the code sequence to
be rematerializable so it would be hoisted by machine licm.
- Add a late pass to break these pseudo instructions into a number of real
instructions. Also move the code in Thumb2 IT pass that breaks up t2MOVi32imm
to this pass. This is done before post regalloc scheduling to allow the
scheduler to proper schedule these instructions. It also allow them to be
if-converted and shrunk by later passes.
llvm-svn: 86304
will not accept negative values for these. LLVM's default operand printing
sign extends values, so that valid unsigned values appear as negative
immediates. Print all VMOV immediate operands as hex values to resolve this.
Radar 7372576.
llvm-svn: 86301
predicates. This allows us to jump thread things like:
_ZN12StringSwitchI5ColorE4CaseILj7EEERS1_RAT__KcRKS0_.exit119:
%tmp1.i24166 = phi i8 [ 1, %bb5.i117 ], [ %tmp1.i24165, %_Z....exit ], [ %tmp1.i24165, %bb4.i114 ]
%toBoolnot.i87 = icmp eq i8 %tmp1.i24166, 0 ; <i1> [#uses=1]
%tmp4.i90 = icmp eq i32 %tmp2.i, 6 ; <i1> [#uses=1]
%or.cond173 = and i1 %toBoolnot.i87, %tmp4.i90 ; <i1> [#uses=1]
br i1 %or.cond173, label %bb4.i96, label %_ZN12...
Where it is "obvious" that when coming from %bb5.i117 that the 'and' is always
false. This triggers a surprisingly high number of times in the testsuite,
and gets us closer to generating good code for doug's strswitch testcase.
This also make a bunch of other code in jump threading redundant, I'll rip
out in the next patch. This survived an enable-checking llvm-gcc bootstrap.
llvm-svn: 86264
unsplittable critical edges, which means the introduction of
loops which cannot be transformed to LoopSimplify form. Fix
LoopSimplify to avoid transforming such loops into invalid
code.
llvm-svn: 86176
MallocInst-autoupgrade users use non-TargetData-computed allocation sizes.
Optimization uses use TargetData to compute the allocation size.
Now that malloc calls can have constant sizes, update isArrayMallocHelper() to use TargetData to determine the size of the malloced type and the size of malloced arrays.
Extend getMallocType() to support malloc calls that have non-bitcast uses.
Update OptimizeGlobalAddressOfMalloc() to optimize malloc calls that have non-bitcast uses. The bitcast use of a malloc call has to be treated specially here because the uses of the bitcast need to be replaced and the bitcast needs to be erased (just like the malloc call) for OptimizeGlobalAddressOfMalloc() to work correctly.
Update PerformHeapAllocSRoA() to optimize malloc calls that have non-bitcast uses. The bitcast use of the malloc is not handled specially here because ReplaceUsesOfMallocWithGlobal replaces through the bitcast use.
Update OptimizeOnceStoredGlobal() to not care about the malloc calls' bitcast use.
Update all globalopt malloc tests to not rely on autoupgraded-MallocInsts, but instead use explicit malloc calls with correct allocation sizes.
llvm-svn: 86077
and extract_subreg as a "copy" that defines a valno.
Also fixes a typo. These two issues prevent a simple subreg coalescing from
happening before.
llvm-svn: 86022
to EmitGEPOffset.
Implement some new transforms for optimizing
subtracts of two pointer to ints into the same vector. This happens
for C++ iterator idioms for example, stringmap takes a const char*
that points to the start and end of a string. Once inlined, we want
the pointer difference to turn back into a length.
This is rdar://7362831.
llvm-svn: 86021
functions that don't have local linkage. Basically, we need to be more
careful about propagating argument information to functions whose results
we aren't tracking. This fixes a miscompilation of
LLVMCConfigurationEmitter.cpp when built with an llvm-gcc that has ipsccp
enabled.
llvm-svn: 85923
the loop preheader. Add instructions which are already in the preheader block that
may be common expressions of those that are hoisted out. These does get a few more
instructions CSE'ed.
llvm-svn: 85799
function to calls of that function, regardless of whether it has local
linkage or has its address taken. Not escaping should only affect
whether we make an aggressive assumption about the arguments to a
function, not whether we can track the result of it.
llvm-svn: 85795
phis, it didn't preserve the alignment of the load. This is a missed
optimization of the alignment is high and a miscompilation when the
alignment is low.
llvm-svn: 85736
ipconstprop and doesn't take much time. Just run it in its place.
This adds a testcase for it, which I plan to expand to cover other
"integration" cases, where we expect the optimizer to be able to
eliminate various things. Due to phase order issues we've regressed
in a number of areas and integration tests are the only way I see to
prevent this.
llvm-svn: 85729
the testcase into:
_test1: ## @test1
## BB#0: ## %entry
leaq L_test1_bb6(%rip), %rax
jmpq *%rax
L_test1_bb: ## Address Taken
LBB1_1: ## %bb
movb $1, %al
ret
L_test1_bb6: ## Address Taken
LBB1_2: ## %bb6
movb $2, %al
ret
Note, it is very very strange that BlockAddressSDNode doesn't carry
around TargetFlags. Dan, please fix this.
llvm-svn: 85703
MergeBlockIntoPredecessor. This makes SimplifyCFG slightly more aggressive,
and makes it unnecessary for LoopUnroll to have its own copy of this code.
llvm-svn: 85667
Bill Wendling