t_addrmode_s4, but with a different scaling factor.
* Encode the Thumb1 load and store instructions. This involved a bit of
refactoring (hi, Chris! :-). Some of the patterns became dead afterwards and
were removed.
llvm-svn: 120482
Use this to make the X86 and ARM targets set isCodeGenOnly=1
automatically for their instructions that have Format=Pseudo,
resolving a hack in tblgen.
llvm-svn: 117862
the LDR instructions have. This makes the literal/register forms of the
instructions explicit and allows us to assign scheduling itineraries
appropriately. rdar://8477752
llvm-svn: 117505
explicit about the operands. Split out the different variants into separate
instructions. This gives us the ability to, among other things, assign
different scheduling itineraries to the variants. rdar://8477752.
llvm-svn: 117409
half of the Q register), rather than with just regno. This allows us to unify the encodings for
a lot of different NEON instrucitons that differ only in whether they have Q or D register operands.
llvm-svn: 117056
have been printed with the "S" modifier after the predicate. With ARM's
unified syntax, they are supposed to go in the other order. We fixed this
for Thumb when we switched to unified syntax but missed changing it for
ARM. Apparently we don't generate these instructions often because no one
noticed until now. Thanks to Bill Wendling for the testcase!
llvm-svn: 116563
instruction should set the processor status flags or not. Remove the now
unnecessary special handling for the bit from the MCCodeEmitter.
llvm-svn: 116360
optional modified register (instead of reg0). Along with r112461 it will make
sure that the optional define of CPSR is marked as "def" and will thus mark the
instructions using these classes (t2ANDS*) as setting the 's' flag.
llvm-svn: 112462
with the VST4 instructions. Until after register allocation, we want to
represent sets of adjacent registers by a single super-register. These
VST4 pseudo instructions have a single QQ or QQQQ source register operand.
They get expanded to the real VST4 instructions with 4 separate D register
operands. Once this conversion is complete, we'll be able to remove the
NEONPreAllocPass and avoid some fragile and hacky code elsewhere.
llvm-svn: 112108
(I discovered 2 more copies of the ARM instruction format list, bringing the
total to 4!! Two of them were already out of sync. I haven't yet gotten into
the disassembler enough to know the best way to fix this, but something needs
to be done.) Add support for encoding these instructions.
llvm-svn: 110754
When a target instruction wants to set target-specific flags, it should simply
set bits in the TSFlags bit vector defined in the Instruction TableGen class.
This works well because TableGen resolves member references late:
class I : Instruction {
AddrMode AM = AddrModeNone;
let TSFlags{3-0} = AM.Value;
}
let AM = AddrMode4 in
def ADD : I;
TSFlags gets the expected bits from AddrMode4 in this example.
llvm-svn: 100384
These instructions use byte index in a control vector (M:Vm) to lookup byte
values in a table and generate a new vector (D:Vd). The table is specified via
a list of vectors, which can be:
{Dn}
{Dn D<n+1>}
{Dn D<n+1> D<n+2>}
{Dn D<n+1> D<n+2> D<n+3>}
llvm-svn: 99789
it as the format for the appropriate N3V*SL*<> classes. These instructions
require special handling of the M:Vm field which encodes the restricted Dm and
the lane index within Dm.
Examples are A8.6.325 VMLA, VMLAL, VMLS, VMLSL (by scalar):
vmlal.s32 q3, d2, d10[0]
llvm-svn: 99690
to encode the byte location of the extracted result in the concatenation of the
operands, from the least significant end.
Modify VEXTd and VEXTq classes to use the format.
llvm-svn: 99659
follow the N3RegFrm's operand order of D:Vd N:Vn M:Vm. The operand order of
N3RegVShFrm is D:Vd M:Vm N:Vn (notice that M:Vm is the first src operand).
Add a parent class N3Vf which requires passing a Format argument and which the
N3V class is modified to inherit from. N3V class represents the "normal"
3-Register NEON Instructions with N3RegFrm.
Also add a multiclass N3VSh_QHSD to represent clusters of NEON 3-Register Shift
Instructions and replace 8 invocations with it.
llvm-svn: 99655
Examples are VABA (Vector Absolute Difference and Accumulate), VABAL (Vector
Absolute Difference and Accumulate Long), and VABD (Vector Absolute Difference).
llvm-svn: 99628
dispatch to the appropriate routines to handle the different interpretations of
the shift amount encoded in the imm6 field. The Vd, Vm fields are interpreted
the same between the two, though.
See, for example, A8.6.367 VQSHL, VQSHLU (immediate) for N2RegVShLFrm format and
A8.6.368 VQSHRN, VQSHRUN for N2RegVShRFrm format.
llvm-svn: 99590
These instructions are only needed for codegen, so I've removed all the
explicit encoding bits for now; they should be set in the same way as the for
VLDMD and VSTMD whenever we add encodings for VFP. The use of addrmode5
requires that the instructions be custom-selected so that the number of
registers can be set in the AM5Opc value.
llvm-svn: 99309
--- Reverse-merging r98889 into '.':
U lib/Target/ARM/ARMInstrNEON.td
U lib/Target/ARM/ARMISelLowering.h
U lib/Target/ARM/ARMInstrInfo.td
U lib/Target/ARM/ARMInstrVFP.td
U lib/Target/ARM/ARMISelLowering.cpp
U lib/Target/ARM/ARMInstrFormats.td
llvm-svn: 99010
instructions to help disassembly.
We also changed the output of the addressing modes to omit the '+' from the
assembler syntax #+/-<imm> or +/-<Rm>. See, for example, A8.6.57/58/60.
And modified test cases to not expect '+' in +reg or #+num. For example,
; CHECK: ldr.w r9, [r7, #28]
llvm-svn: 98745
U test/CodeGen/ARM/tls2.ll
U test/CodeGen/ARM/arm-negative-stride.ll
U test/CodeGen/ARM/2009-10-30.ll
U test/CodeGen/ARM/globals.ll
U test/CodeGen/ARM/str_pre-2.ll
U test/CodeGen/ARM/ldrd.ll
U test/CodeGen/ARM/2009-10-27-double-align.ll
U test/CodeGen/Thumb2/thumb2-strb.ll
U test/CodeGen/Thumb2/ldr-str-imm12.ll
U test/CodeGen/Thumb2/thumb2-strh.ll
U test/CodeGen/Thumb2/thumb2-ldr.ll
U test/CodeGen/Thumb2/thumb2-str_pre.ll
U test/CodeGen/Thumb2/thumb2-str.ll
U test/CodeGen/Thumb2/thumb2-ldrh.ll
U utils/TableGen/TableGen.cpp
U utils/TableGen/DisassemblerEmitter.cpp
D utils/TableGen/RISCDisassemblerEmitter.h
D utils/TableGen/RISCDisassemblerEmitter.cpp
U Makefile.rules
U lib/Target/ARM/ARMInstrNEON.td
U lib/Target/ARM/Makefile
U lib/Target/ARM/AsmPrinter/ARMInstPrinter.cpp
U lib/Target/ARM/AsmPrinter/ARMAsmPrinter.cpp
U lib/Target/ARM/AsmPrinter/ARMInstPrinter.h
D lib/Target/ARM/Disassembler
U lib/Target/ARM/ARMInstrFormats.td
U lib/Target/ARM/ARMAddressingModes.h
U lib/Target/ARM/Thumb2ITBlockPass.cpp
llvm-svn: 98640
(RISCDisassemblerEmitter) which emits the decoder functions for ARM and Thumb,
and the disassembler core which invokes the decoder function and builds up the
MCInst based on the decoded Opcode.
Added sub-formats to the NeonI/NeonXI instructions to further refine the NEONFrm
instructions to help disassembly.
We also changed the output of the addressing modes to omit the '+' from the
assembler syntax #+/-<imm> or +/-<Rm>. See, for example, A8.6.57/58/60.
And modified test cases to not expect '+' in +reg or #+num. For example,
; CHECK: ldr.w r9, [r7, #28]
llvm-svn: 98637
writebacks to the address register. This gets rid of the hack that the
first register on the list was the magic writeback register operand. There
was an implicit constraint that if that operand was not reg0 it had to match
the base register operand. The post-RA scheduler's antidependency breaker
did not understand that constraint and sometimes changed one without the
other. This also fixes Radar 7495976 and should help the verifier work
better for ARM code.
There are now new ld/st instructions explicit writeback operands and explicit
constraints that tie those registers together.
llvm-svn: 98409
o Parallel addition and subtraction, signed/unsigned
o Miscellaneous operations: QADD, QDADD, QSUB, QDSUB
o Unsigned sum of absolute differences [and accumulate]: USAD8, USADA8
o Signed/Unsigned saturate: SSAT, SSAT16, USAT, USAT16
o Signed multiply accumulate long (halfwords): SMLAL<x><y>
o Signed multiply accumulate/subtract [long] (dual): SMLAD[x], SMLALD[X], SMLSD[X], SMLSLD[X]
o Signed dual multiply add/subtract [long]: SMUAD[X], SMUSD[X]
llvm-svn: 97276
Plus add two formats: MiscFrm and ThumbMiscFrm. Some of the for disassembly
only instructions are changed from Pseudo Format to MiscFrm Format.
llvm-svn: 96032
bit (Inst{22}) and the M bit (Inst{5}) should be left unspecified. For binary
format instructions, Inst{6} and Inst{4} need to specified for proper decodings.
llvm-svn: 94855
Owen Anderson