When executing a script command in HandleCommand(s) we currently print
its output twice
You can see this issue in action when adding a breakpoint command:
(lldb) b main
Breakpoint 1: where = main.out`main + 13 at main.cpp:2:3, address = 0x0000000100003fad
(lldb) break command add 1 -o "script print(\"Hey!\")"
(lldb) r
Process 76041 launched: '/tmp/main.out' (x86_64)
Hey!
(lldb) script print("Hey!")
Hey!
Process 76041 stopped
The issue is caused by HandleCommands using a temporary
CommandReturnObject and one of the commands (`script` in this case)
setting an immediate output stream. This causes the result to be printed
twice: once directly to the immediate output stream and once when
printing the result of HandleCommands.
This patch fixes the issue by introducing a new option to suppress
immediate output for temporary CommandReturnObjects.
Differential revision: https://reviews.llvm.org/D103349
There is a common pattern:
result.AppendError(...);
result.SetStatus(eReturnStatusFailed);
I found that some commands don't actually "fail" but only
print "error: ..." because the second line got missed.
This can cause you to miss a failed command when you're
using the Python interface during testing.
(and produce some confusing script results)
I did not find any place where you would want to add
an error without setting the return status, so just
set eReturnStatusFailed whenever you add an error to
a command result.
This change does not remove any of the now redundant
SetStatus. This should allow us to see if there are any
tests that have commands unexpectedly fail with this change.
(the test suite passes for me but I don't have access to all
the systems we cover so there could be some corner cases)
Some tests that failed on x86 and AArch64 have been modified
to work with the new behaviour.
Differential Revision: https://reviews.llvm.org/D103701
Other LLVM projects use the suffix `-depends` for the test dependencies,
however LLDB uses `-deps` and seems to be the only project under the
LLVM to do so.
In order to make the projects more homogeneous, switch all the
references to `lldb-test-deps` to `lldb-test-depends`.
Additionally, provide a compatibility target with the old name and
depending on the new name, in order to not break anyone workflow.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D102889
In D98289#inline-939112 @dblaikie said:
Perhaps this could be more informative about what makes the range list
index of 0 invalid? "index 0 out of range of range list table (with
range list base 0xXXX) with offset entry count of XX (valid indexes
0-(XX-1))" Maybe that's too verbose/not worth worrying about since
this'll only be relevant to DWARF producers trying to debug their
DWARFv5, maybe no one will ever see this message in practice. Just
a thought.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D102851
DW_AT_ranges can use DW_FORM_sec_offset (instead of DW_FORM_rnglistx).
In such case DW_AT_rnglists_base does not need to be present.
DWARF-5 spec:
"If the offset_entry_count is zero, then DW_FORM_rnglistx cannot
be used to access a range list; DW_FORM_sec_offset must be used
instead. If the offset_entry_count is non-zero, then
DW_FORM_rnglistx may be used to access a range list;"
This fix is for TestTypeCompletion.py category `dwarf` using GCC with DWARF-5.
The fix just provides GetRnglist() lazy getter for `m_rnglist_table`.
The testcase is easier to review by:
diff -u lldb/test/Shell/SymbolFile/DWARF/DW_AT_low_pc-addrx.s \
lldb/test/Shell/SymbolFile/DWARF/DW_AT_range-DW_FORM_sec_offset.s
Differential Revision: https://reviews.llvm.org/D98289
This patch stops lit from looking on the PATH for clang, lld and other
users of use_llvm_tool (currently only the debuginfo-tests) unless the
call explicitly requests to opt into using the PATH. When not opting in,
tests will only look in the build directory.
See the mailing list thread starting from
https://lists.llvm.org/pipermail/llvm-dev/2021-May/150421.html.
See the review for details of why decisions were made about when still
to use the PATH.
Reviewed by: thopre
Differential Revision: https://reviews.llvm.org/D102630
The Mips in DW_LANG_Mips_Assembler is a vendor name not an
architecture name and in lack of a proper generic DW_LANG_assembler,
some assemblers emit DWARF using this tag. Due to a warning I recently
introduced users will now be greeted with
This version of LLDB has no plugin for the mipsassem language. Inspection of frame variables will be limited.
By renaming this to just "Assembler" this error message will make more sense.
Differential Revision: https://reviews.llvm.org/D101406
rdar://77214764
The FreeBSD coredumps from i386 systems contain only FSAVE-style
NT_FPREGSET. Since we do not really support reading that kind of data
anymore, just use NT_X86_XSTATE to get FXSAVE-style data when available.
Differential Revision: https://reviews.llvm.org/D101086
- The register encoding state in the JSON crashlog format changes.
Update the parser accordingly.
- Print the register state when printing the symbolicated thread.
Add initial tests for reading register sets from core dumps. This
includes a C++ program to write registers and dump core, resulting core
dumps for Linux, FreeBSD and NetBSD, and the tests to verify them.
The tests are split into generic part, verifying user-specified register
values, and coredump-specific tests that verify memory addresses that
differ for every dump.
At this moment, all platforms support GPRs and FPRs up to XMM for amd64
target. The i386 target does not work on NetBSD at all, and is missing
FPRs entirely on FreeBSD.
Differential Revision: https://reviews.llvm.org/D91963
The code used the total number of symbols to create a symbol ID for the
synthetic symbols. This is not correct because the IDs of real symbols
can be higher than their total number, as we do not add all symbols (and
in particular, we never add symbol zero, which is not a real symbol).
This meant we could have symbols with duplicate IDs, which caused
problems if some relocations were referring to the duplicated IDs. This
was the cause of the failure of the test D97786.
This patch fixes the code to use the ID of the highest (last) symbol
instead.
DWARF allows .dwo file paths to be relative rather than absolute. When
they are relative, DWARF uses DW_AT_comp_dir to find the .dwo
file. DW_AT_comp_dir can also be relative, making the entire search
patch for the .dwo file relative. In this case, LLDB currently
searches relative to its current working directory, i.e. the directory
from which the debugger was launched. This is not right, as the
compiler, which generated the relative paths, can have no idea where
the debugger will be launched. The correct thing is to search relative
to the location of the executable binary. That is what this patch
does.
Differential Revision: https://reviews.llvm.org/D97786
DWARF allows .dwo file paths to be relative rather than absolute. When
they are relative, DWARF uses DW_AT_comp_dir to find the .dwo
file. DW_AT_comp_dir can also be relative, making the entire search
patch for the .dwo file relative. In this case, LLDB currently
searches relative to its current working directory, i.e. the directory
from which the debugger was launched. This is not right, as the
compiler, which generated the relative paths, can have no idea where
the debugger will be launched. The correct thing is to search relative
to the location of the executable binary. That is what this patch
does.
Differential Revision: https://reviews.llvm.org/D97786
These tests fail if you build without the x86 llvm backend.
Either because they use an x86 triple or try to backtrace which
requires some x86 knowledge to see all frames.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D100194
The original commit was reverted because of the problems it introduced
on Linux. However, FreeBSD should not be affected, so restore that part
and we will address Linux separately.
While at it, remove the dbreg hack as the underlying issue has been
fixed in the FreeBSD kernel and the problem is unlikely to happen
in real life use anyway.
Differential Revision: https://reviews.llvm.org/D98822
This commit has caused the following tests to be flaky:
TestThreadSpecificBpPlusCondition.py
TestExitDuringExpression.py
The exact cause is not known yet, but since both tests deal with
threads, my guess is it has something to do with the tracking of
creation of new threads (which the commit touches upon).
This reverts the following commits:
d01bff8cbd,
ba62ebc48e,
e761b6b4c5,
a345419ee0.
By moving them into a folder with a local lit config
requiring x86. All these tests use x86 target triples.
There are two tests that require target-x86_64 because
they run program files (instead of just needing the backend).
Those are moved to the x86 folder also but their REQUIRES are
unchanged.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D100193
Watch for fork(2)/vfork(2) (also fork/vfork-style clone(2) on Linux)
notifications and explicitly detach the forked child process, and add
initial tests for these cases. The code covers FreeBSD, Linux
and NetBSD process plugins. There is no new user-visible functionality
provided -- this change lays foundations over subsequent work on fork
support.
Differential Revision: https://reviews.llvm.org/D98822
Inline callstacks were being incorrectly displayed in the results of "image lookup --address". The deepest frame wasn't displaying the line table line entry, it was always showing the inline information's call file and line on the previous frame. This is now fixed and has tests to make sure it doesn't regress.
Differential Revision: https://reviews.llvm.org/D98761
Remove the remaining references to LLDB_CAPTURE_REPRODUCER. I removed
the functionality in an earlier commit but forgot that there was a
corresponding test and logic to unset it in our test suite.
Commit 6bc1e69de2 changed the search string
to also check for the generated strings that surround the plain assert:
Assertion `false && "lldb-test assert"' failed
^^^^^^^^^
This causes the test to fail on setups where the generated assert message
looks different. E.g., on macOS the generated message looks like this:
Assertion failed: (false && "lldb_assert failed"), function lldb_assert
This reverts the old behaviour of just checking for the actual string we
have inside LLDB.
LLDB on Linux built with symbols is showing this error.
Without symbols it still PASSes:
lldb-test: .../lldb/source/Utility/LLDBAssert.cpp:29: void lldb_private::lldb_assert(bool, const char *, const char *, const char *, unsigned int): Assertion `false && "lldb_assert failed"' failed.
With symbols it FAILs:
lldb-test: .../lldb/tools/lldb-test/lldb-test.cpp:1086: int opts::assert::lldb_assert(lldb_private::Debugger &): Assertion `false && "lldb-test assert"' failed.
Differential Revision: https://reviews.llvm.org/D99462
The file contained bogus input - the DIE list was not properly
terminated. This should not cause a crash, but it seems it was crashing
at least on linux arm and x86 windows.
lit has grown a feature where it stores the runtimes of all tests.
Normally, these times should be stored in the build directory, but
because our API tests have set test_exec_root to point to the source
tree, it has ended up polluting our checkout and led to the
.lit_test_times.txt being committed to the repository.
Delete this file, and adjust the exec root of API tests. I've also
needed to adjust the root of Shell tests, in order to avoid the two
overlapping.
SymbolFileDWARF::ResolveSymbolContext is currently unaware that in DWARF5 the primary file is specified at file index 0. As a result it misses to correctly resolve the symbol context for the primary file when DWARF5 debug data is used and the primary file is only specified at index 0.
This change makes use of CompileUnit::ResolveSymbolContext to resolve the symbol context. The ResolveSymbolContext in CompileUnit has been previously already updated to reflect changes in DWARF5
and contains a more readable version. It can resolve more, but will also do a bit more work than
SymbolFileDWARF::ResolveSymbolContext (getting the Module, and going through SymbolFileDWARF::ResolveSymbolContextForAddress), however, it's mostly directed by $resolve_scope
what will be resolved, and ensures that code is easier to maintain if there's only one path.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D98619
Call `os_log_fault` when an lldb assert fails. We piggyback off
`LLVM_SUPPORT_XCODE_SIGNPOSTS`, which also depends on `os_log`, to avoid
having to introduce another CMake check and corresponding define.
This patch also adds a small test using lldb-test that verifies we abort
with a "regular" assertion when asserts are enabled.
Differential revision: https://reviews.llvm.org/D98987
Make the API, Shell and Unit tests independent lit test suites. This
allows us to specify different dependencies and skip rebuilding all the
unit test (which is particularly expensive) when running check-lldb-api
or check-lldb-shell.
This does not change the autogenerated targets such as
check-lldb-shell-driver or the top level check-lldb target, which all
continue to work as before.
Differential revision: https://reviews.llvm.org/D98842
This variable is used to reducing the likelihood of hitting module cache
issues in CI where different branches can potentially run on the same
machine.
Use lit's with_system_environment function to propagate environment
variables to the tests. Include the usual suspects, as well as the
variables already explicitly forwarded.
LLVM OrcJIT is shifting from RuntimeDyld to JITLink. Starting with D96627 I am planning to add debug support. It would be great to have test coverage for it in LLDB early on.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D96634
David Spickett