Fix a major bug from r265456. Although it's now much rarer, ValueMapper
sometimes has to duplicate cycles. The
might-transitively-reference-a-temporary counts don't decrement on their
own when there are cycles, and you need to call MDNode::resolveCycles to
fix it.
r265456 was checking the input nodes to see if they were unresolved.
This is useless; they should never be unresolved. Instead we should
check the output nodes and resolve cycles on them.
llvm-svn: 266258
A DISubprogram on x86_64 was 48 bytes. During an LTO build we
end up allocating *a lot* of these (see Duncan's numbers on
llvm-dev and/or my numbers in the review link).
This change reduces the size to 40 bytes, with a nice effect
on peak memory usage when LTO'ing clang.
There are more classes in the hierarchy which can be compacted
so more patches will come. DISubprogram was the biggest offender
in my profiling, anyway.
Differential Revision: http://reviews.llvm.org/D18918
llvm-svn: 266241
Raw function pointer collected by value
profile data may be from external functions
that are not instrumented. They won't have
mapping data to be used by the deserializer.
Force the value to be 0 in this case.
llvm-svn: 265890
Prevent the Metadata side-table in ValueMap from growing unnecessarily
when RF_NoModuleLevelChanges. As a drive-by, make ValueMap::hasMD,
which apparently had no users until I used it here for testing, actually
compile.
llvm-svn: 265828
Stop adding MDString to the Metadata section of the ValueMap in
MapMetadata. It blows up the size of the map for no benefit, since we
can always return quickly anyway.
There is a potential follow-up that I don't think I'll push on right
away, but maybe someone else is interested: stop checking for a
pre-mapped MDString, and move the `isa<MDString>()` checks in
Mapper::mapSimpleMetadata and MDNodeMapper::getMappedOp in front of the
`VM.getMappedMD()` calls. While this would preclude explicitly
remapping MDStrings it would probably be a little faster.
llvm-svn: 265827
This reverts commit r265765, reapplying r265759 after changing a call from
LocalAsMetadata::get to ValueAsMetadata::get (and adding a unit test). When a
local value is mapped to a constant (like "i32 %a" => "i32 7"), the new debug
intrinsic operand may no longer be pointing at a local.
http://lab.llvm.org:8080/green/job/clang-stage1-configure-RA_build/19020/
The previous coommit message follows:
--
This is a partial re-commit -- maybe more of a re-implementation -- of
r265631 (reverted in r265637).
This makes RF_IgnoreMissingLocals behave (almost) consistently between
the Value and the Metadata hierarchy. In particular:
- MapValue returns nullptr or "metadata !{}" for missing locals in
MetadataAsValue/LocalAsMetadata bridging paris, depending on
the RF_IgnoreMissingLocals flag.
- MapValue doesn't memoize LocalAsMetadata-related results.
- MapMetadata no longer deals with LocalAsMetadata or
RF_IgnoreMissingLocals at all. (This wasn't in r265631 at all, but
I realized during testing it would make the patch simpler with no
loss of generality.)
r265631 went too far, making both functions universally ignore
RF_IgnoreMissingLocals. This broke building (e.g.) compiler-rt.
Reassociate (and possibly other passes) don't currently maintain
dominates-use invariants for metadata operands, resulting in IR like
this:
define void @foo(i32 %arg) {
call void @llvm.some.intrinsic(metadata i32 %x)
%x = add i32 1, i32 %arg
}
If the inliner chooses to inline @foo into another function, then
RemapInstruction will call `MapValue(metadata i32 %x)` and assert that
the return is not nullptr.
I've filed PR27273 to add a Verifier check and fix the underlying
problem in the optimization passes.
As a workaround, return `!{}` instead of nullptr for unmapped
LocalAsMetadata when RF_IgnoreMissingLocals is unset. Otherwise, match
the behaviour of r265631.
Original commit message:
ValueMapper: Make LocalAsMetadata match function-local Values
Start treating LocalAsMetadata similarly to function-local members of
the Value hierarchy in MapValue and MapMetadata.
- Don't memoize them.
- Return nullptr if they are missing.
This also cleans up ConstantAsMetadata to stop listening to the
RF_IgnoreMissingLocals flag.
llvm-svn: 265768
This is a partial re-commit -- maybe more of a re-implementation -- of
r265631 (reverted in r265637).
This makes RF_IgnoreMissingLocals behave (almost) consistently between
the Value and the Metadata hierarchy. In particular:
- MapValue returns nullptr or "metadata !{}" for missing locals in
MetadataAsValue/LocalAsMetadata bridging paris, depending on
the RF_IgnoreMissingLocals flag.
- MapValue doesn't memoize LocalAsMetadata-related results.
- MapMetadata no longer deals with LocalAsMetadata or
RF_IgnoreMissingLocals at all. (This wasn't in r265631 at all, but
I realized during testing it would make the patch simpler with no
loss of generality.)
r265631 went too far, making both functions universally ignore
RF_IgnoreMissingLocals. This broke building (e.g.) compiler-rt.
Reassociate (and possibly other passes) don't currently maintain
dominates-use invariants for metadata operands, resulting in IR like
this:
define void @foo(i32 %arg) {
call void @llvm.some.intrinsic(metadata i32 %x)
%x = add i32 1, i32 %arg
}
If the inliner chooses to inline @foo into another function, then
RemapInstruction will call `MapValue(metadata i32 %x)` and assert that
the return is not nullptr.
I've filed PR27273 to add a Verifier check and fix the underlying
problem in the optimization passes.
As a workaround, return `!{}` instead of nullptr for unmapped
LocalAsMetadata when RF_IgnoreMissingLocals is unset. Otherwise, match
the behaviour of r265631.
Original commit message:
ValueMapper: Make LocalAsMetadata match function-local Values
Start treating LocalAsMetadata similarly to function-local members of
the Value hierarchy in MapValue and MapMetadata.
- Don't memoize them.
- Return nullptr if they are missing.
This also cleans up ConstantAsMetadata to stop listening to the
RF_IgnoreMissingLocals flag.
llvm-svn: 265759
Remove the assertion that disallowed the combination, since
RF_IgnoreMissingLocals should have no effect on globals. As it happens,
RF_NullMapMissingGlobalValues asserted in MapValue(Constant*,...), so I
also changed a cast to a cast_or_null to get my test passing.
llvm-svn: 265633
Start treating LocalAsMetadata similarly to function-local members of
the Value hierarchy in MapValue and MapMetadata.
- Don't memoize them.
- Return nullptr if they are missing.
This also cleans up ConstantAsMetadata to stop listening to the
RF_IgnoreMissingLocals flag.
llvm-svn: 265631
Summary:
In the context of http://wg21.link/lwg2445 C++ uses the concept of
'stronger' ordering but doesn't define it properly. This should be fixed
in C++17 barring a small question that's still open.
The code currently plays fast and loose with the AtomicOrdering
enum. Using an enum class is one step towards tightening things. I later
also want to tighten related enums, such as clang's
AtomicOrderingKind (which should be shared with LLVM as a 'C++ ABI'
enum).
This change touches a few lines of code which can be improved later, I'd
like to keep it as NFC for now as it's already quite complex. I have
related changes for clang.
As a follow-up I'll add:
bool operator<(AtomicOrdering, AtomicOrdering) = delete;
bool operator>(AtomicOrdering, AtomicOrdering) = delete;
bool operator<=(AtomicOrdering, AtomicOrdering) = delete;
bool operator>=(AtomicOrdering, AtomicOrdering) = delete;
This is separate so that clang and LLVM changes don't need to be in sync.
Reviewers: jyknight, reames
Subscribers: jyknight, llvm-commits
Differential Revision: http://reviews.llvm.org/D18775
llvm-svn: 265602
Instead of copying arguments from the source function to the
destination, steal them. This has a few advantages.
- The ValueMap doesn't need to be seeded with (or cleared of)
Arguments.
- Often the destination function won't have created any arguments yet,
so this avoids malloc traffic.
- Argument names don't need to be copied.
Because argument lists are lazy, this required a new
Function::stealArgumentListFrom helper.
llvm-svn: 265519
This commit completely rewrites Mapper::mapMetadata (the implementation
of llvm::MapMetadata) using an iterative algorithm. The guts of the new
algorithm are in MDNodeMapper::map, the entry function in a new class.
Previously, Mapper::mapMetadata performed a recursive exploration of the
graph with eager "just in case there's a reason" malloc traffic.
The new algorithm has these benefits:
- New nodes and temporaries are not created eagerly.
- Uniquing cycles are not duplicated (see new unit test).
- No recursion.
Given a node to map, it does this:
1. Use a worklist to perform a post-order traversal of the transitively
referenced unmapped nodes.
2. Track which nodes will change operands, and which will have new
addresses in the mapped scheme. Propagate the changes through the
POT until fixed point, to pick up uniquing cycles that need to
change.
3. Map all the distinct nodes without touching their operands. If
RF_MoveDistinctMetadata, they get mapped to themselves; otherwise,
they get mapped to clones.
4. Map the uniqued nodes (bottom-up), lazily creating temporaries for
forward references as needed.
5. Remap the operands of the distinct nodes.
Mehdi helped me out by profiling this with -flto=thin. On his workload
(importing/etc. for opt.cpp), MapMetadata sped up by 15%, contributed
about 50% less to persistent memory, and made about 100x fewer calls to
malloc. The speedup is less than I'd hoped. The profile mainly blames
DenseMap lookups; perhaps there's a way to reduce them (e.g., by
disallowing remapping of MDString).
It would be nice to break the strange remaining recursion on the Value
side: MapValue => materializeInitFor => RemapInstruction => MapValue. I
think we could do this by having materializeInitFor return a worklist of
things to be remapped.
llvm-svn: 265456
Some Include What You Use suggestions were used too.
Use anonymous namespaces in source files.
Differential revision: http://reviews.llvm.org/D18778
llvm-svn: 265454
destruction.
This makes the Expected<T> class behave like Error, even when in success mode.
Expected<T> values must be checked to see whether they contain an error prior
to being dereferenced, assigned to, or destructed.
llvm-svn: 265446
Summary:
A character within a string literal is not escaped correctly.
In this case, there is no semantic change because the invalid character turn out to be NUL anyway.
note: "\0x12" is equivalent to {0, 'x', '1', '2'} and not { 12 }.
This issue was found by clang-tidy.
Reviewers: rnk
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D18747
llvm-svn: 265376
We were using array_pod_sort on an array of type 'Attribute', which
wraps a pointer to AttributeImpl. For the most part this didn't matter
because the printing code prints enum attributes in a defined order, but
integer attributes such as 'align' and 'dereferenceable' were not
ordered.
Furthermore, AttributeImpl::operator< was broken for integer attributes.
An integer attribute is a kind and an integer value, and both pieces
need to be compared.
By fixing the comparison operator, we can go back to std::sort, and
things look good now. This should fix clang arm-swiftcall.c test
failures on Windows.
llvm-svn: 265361
Support seeding a ValueMap with nullptr for Metadata entries, a
situation I didn't consider in the Metadata/Value split.
I added a ValueMapper::getMappedMD accessor that returns an
Optional<Metadata*> with the mapped (possibly null) metadata. IRMover
needs to use this to avoid modifying the map when it's checking for
unneeded subprograms. I updated a call from bugpoint since I find the
new code clearer.
llvm-svn: 265228
Provide a class to generate a SHA1 from a sequence of bytes, and
a convenience raw_ostream adaptor.
This will be used to provide a "build-id" by hashing the Module
block when writing bitcode. ThinLTO will use this information for
incremental build.
Reapply r265094 which was reverted in r265102 because it broke
MSVC bots (constexpr is not supported).
http://reviews.llvm.org/D16325
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 265107
This reverts commit r265096, r265095, and r265094.
Windows build is broken, and the validation does not pass.
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 265102
Provide a class to generate a SHA1 from a sequence of bytes, and
a convenience raw_ostream adaptor.
This will be used to provide a "build-id" by hashing the Module
block when writing bitcode. ThinLTO will use this information for
incremental build.
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 265094
This mostly cosmetic patch moves the DebugEmissionKind enum from DIBuilder
into DICompileUnit. DIBuilder is not the right place for this enum to live
in — a metadata consumer should not have to include DIBuilder.h.
I also added a Verifier check that checks that the emission kind of a
DICompileUnit is actually legal.
http://reviews.llvm.org/D18612
<rdar://problem/25427165>
llvm-svn: 265077
Commit r260791 contained an error in that it would introduce a cross-module
reference in the old module. It also introduced O(N^2) complexity in the
module cloner by requiring the entire module to be visited for each function.
Fix both of these problems by avoiding use of the CloneDebugInfoMetadata
function (which is only designed to do intra-module cloning) and cloning
function-attached metadata in the same way that we clone all other metadata.
Differential Revision: http://reviews.llvm.org/D18583
llvm-svn: 264935
There is code under review that requires StringMap to have a copy constructor,
and this makes StringMap more consistent with our other containers (like
DenseMap) that have copy constructors.
Differential Revision: http://reviews.llvm.org/D18506
llvm-svn: 264906
Using ArrayRef in annotateValueSite's parameter instead of using an array
and it's size.
Differential Revision: http://reviews.llvm.org/D18568
llvm-svn: 264879
Since we have moved to a model where functions are imported in bulk from
each source module after making summary-based importing decisions, there
is no longer a need to link metadata as a postpass, and all users have
been removed.
This essentially reverts r255909 and follow-on fixes.
llvm-svn: 264763
Function names in ObjC can have spaces in them. This interacts poorly
with name compression, which uses spaces to separate PGO names. Fix the
issue by using a different separator and update a test.
I chose "\01" as the separator because 1) it's non-printable, 2) we
strip it from PGO names, and 3) it's the next natural choice once "\00"
is discarded (that one's overloaded).
What's changed since the original commit?
- I fixed up the covmap-V2 binary format tests using a linux VM.
- I weakened the CHECK lines in instrprof-comdat.h to account for the
fact that there have been bugfixes to clang coverage. These will be
fixed up in a follow-up.
- I added an assert to make sure we don't get bitten by this again.
- I constructed the c-general.profraw file without name compression
enabled to appease some bots.
Differential Revision: http://reviews.llvm.org/D18516
llvm-svn: 264658
Explicitly check that artificial byte limit is rounded correctly by
exposing BitstreamReader::Size through a new accessor, getSizeIfKnown.
The original code for rounding (from r264547) wasn't obviously correct,
and even though r264623 cleaned it up (by calling llvm::alignTo) I think
it's worth testing.
llvm-svn: 264650
Function names in ObjC can have spaces in them. This interacts poorly
with name compression, which uses spaces to separate PGO names. Fix the
issue by using a different separator and update a test.
I chose "\01" as the separator because 1) it's non-printable, 2) we
strip it from PGO names, and 3) it's the next natural choice once "\00"
is discarded (that one's overloaded).
This reverts the revert commit beaf3d18. What's changed?
- I fixed up the covmap-V2 binary format tests using a linux VM.
- I updated the expected counts in instrprof-comdat.h to account for
the fact that there have been bugfixes to clang coverage.
- I added an assert to make sure we don't get bitten by this again.
Differential Revision: http://reviews.llvm.org/D18516
llvm-svn: 264641
Function names in ObjC can have spaces in them. This interacts poorly
with name compression, which uses spaces to separate PGO names. Fix the
issue by using a different separator and update a test.
I chose "\01" as the separator because 1) it's non-printable, 2) we
strip it from PGO names, and 3) it's the next natural choice once "\00"
is discarded (that one's overloaded).
Differential Revision: http://reviews.llvm.org/D18516
llvm-svn: 264587
When emitting coverage mappings for functions with local linkage and an
unknown filename, we use "<unknown>:func" for the PGO function name. The
problem is that we don't strip "<unknown>" from the name when loading
coverage data, like we do for other file names. Fix that and add a test.
llvm-svn: 264559
Split helper out of EmitRecordWithAbbrevImpl called emitBlob to reduce
code duplication, and add a few tests for it.
No functionality change intended.
llvm-svn: 264550
The implementation is fairly obvious. This is preparation for using
some blobs in bitcode.
For clarity (and perhaps future-proofing?), I moved the call to
JumpToBit in BitstreamCursor::readRecord ahead of calling
MemoryObject::getPointer, since JumpToBit can theoretically (a) read
bytes, which (b) invalidates the blob pointer.
This isn't strictly necessary the two memory objects we have:
- The return of RawMemoryObject::getPointer is valid until the memory
object is destroyed.
- StreamingMemoryObject::getPointer is valid until the next chunk is
read from the stream. Since the JumpToBit call is only going ahead
to a word boundary, we'll never load another chunk.
However, reordering makes it clear by inspection that the blob returned
by BitstreamCursor::readRecord will be valid.
I added some tests for StreamingMemoryObject::getPointer and
BitstreamCursor::readRecord.
llvm-svn: 264549
Change the filename to indicate this is a test, rename the tests, move
them into an anonymous namespace, and rename some variables. All to
match our usual style before making further changes.
llvm-svn: 264548
Allow users of SimpleBitstreamCursor to limit the number of bytes
available to the cursor. This is preparation for instantiating a cursor
that isn't allowed to load more bytes from a StreamingMemoryObject (just
move around the ones already-loaded).
llvm-svn: 264547
Add API to SimpleBitstreamCursor to allow users to translate between
byte addresses and pointers.
- jumpToPointer: move the bit position to a particular pointer.
- getPointerToByte: get the pointer for a particular byte.
- getPointerToBit: get the pointer for the byte of the current bit.
- getCurrentByteNo: convenience function for assertions and tests.
Mainly adds unit tests (getPointerToBit/Byte already has a use), but
also preparation for eventually using jumpToPointer.
llvm-svn: 264546
This makes us no longer relying on move-construction elision by the compiler.
Suggested by D. Blaikie.
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 264475
This helper method creates a pre-checked Error suitable for use as an out
parameter in a constructor. This avoids the need to have the constructor
check a known-good error before assigning to it.
llvm-svn: 264467
This is a recommit of r264414 after fixing the buildbot failure caused by
incompatible use of std::vector.erase().
The original message:
Add erase() which returns an iterator pointing to the next element after the
erased one. This makes it possible to erase selected elements while iterating
over the SetVector :
while (I != E)
if (test(*I))
I = SetVector.erase(I);
else
++I;
Reviewers: qcolombet, mcrosier, MatzeB, dblaikie
Subscribers: dberlin, dblaikie, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D18281
llvm-svn: 264450
Summary:
Add erase() which returns an iterator pointing to the next element after the
erased one. This makes it possible to erase selected elements while iterating
over the SetVector :
while (I != E)
if (test(*I))
I = SetVector.erase(I);
else
++I;
Reviewers: qcolombet, mcrosier, MatzeB, dblaikie
Subscribers: dberlin, dblaikie, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D18281
llvm-svn: 264414
Summary:
Loading IR with debug info improves MDString::get() from 19ms to 10ms.
This is a rework of D16597 with adding an "emplace" method on the StringMap
to avoid requiring the MDString move ctor to be public.
Reviewers: dexonsmith
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D17920
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 264386
Summary:
StringMap ctor accepts an initialize size, but expect it to be
rounded to the next power of 2. The ctor can handle that directly
instead of expecting clients to round it. Also, since the map will
resize itself when 75% full, take this into account an initialize
a larger initial size to avoid any growth.
Reviewers: dblaikie
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18344
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 264385
Summary:
Just running the loop in the unittests for a few more iterations
(till 48) exhibit that the condition on the limit was not handled
properly in r263522.
Rewrite the test to use a class to count move/copies that happens
when inserting into the map.
Also take the opportunity to refactor the logic to compute the
number of buckets required for a given number of entries in the map.
Use this when constructing a DenseMap with a desired size given to
the constructor (and add a tests for this).
Reviewers: dblaikie
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18345
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 264384
This is a temporary crutch to enable code that currently uses std::error_code
to be incrementally moved over to Error. Requiring all Error instances be
convertible enables clients to call errorToErrorCode on any error (not just
ECErrors created by conversion *from* an error_code).
This patch also moves code for Error from ErrorHandling.cpp into a new
Error.cpp file.
llvm-svn: 264221
The BumpPtrAllocator currently doesn't handle zero length allocations well.
The discussion for how to fix that is ongoing. However, there's no need
for StringRef::copy to actually allocate anything here anyway, so just
return StringRef() when we get a zero length copy.
Reviewed by David Blaikie
llvm-svn: 264201
MSVC as usual:
C:\Buildbot\Slave\llvm-clang-lld-x86_64-scei-ps4-windows10pro-fast\llvm.src\include\llvm/ADT/STLExtras.h(120):
error C2100: illegal indirection
C:\Buildbot\Slave\llvm-clang-lld-x86_64-scei-ps4-windows10pro-fast\llvm.src\include\llvm/IR/Instructions.h(3966):
note: see reference to class template instantiation
'llvm::mapped_iterator<llvm::User::op_iterator,llvm::CatchSwitchInst::DerefFnTy>'
being compiled
This reverts commit e091dd63f1f34e043748e28ad160d3bc17731168.
llvm-svn: 263760
idiom.
Most LLVM tool code exits immediately when an error is encountered and prints an
error message to stderr. The ExitOnError class supports this by providing two
call operators - one for Errors, and one for Expected<T>s. Calls to code that
can return Errors (or Expected<T>s) can use these calls to bail out on error,
and otherwise continue as if the operation had succeeded. E.g.
Error foo();
Expected<int> bar();
int main(int argc, char *argv[]) {
ExitOnError ExitOnErr;
ExitOnErr.setBanner(std::string("Error in ") + argv[0] + ":");
// Exit if foo returns an error. No need to manually check error return.
ExitOnErr(foo());
// Exit if bar returns an error, otherwise unwrap the contained int and
// continue.
int X = ExitOnErr(bar());
// ...
return 0;
}
llvm-svn: 263749
This patch introduces the Error classs for lightweight, structured,
recoverable error handling. It includes utilities for creating, manipulating
and handling errors. The scheme is similar to exceptions, in that errors are
described with user-defined types. Unlike exceptions however, errors are
represented as ordinary return types in the API (similar to the way
std::error_code is used).
For usage notes see the LLVM programmer's manual, and the Error.h header.
Usage examples can be found in unittests/Support/ErrorTest.cpp.
Many thanks to David Blaikie, Mehdi Amini, Kevin Enderby and others on the
llvm-dev and llvm-commits lists for lots of discussion and review.
llvm-svn: 263609
In some places, like InstCombine, we resize a DenseMap to fit the elements
we intend to put in it, then insert those elements (to avoid continual
reallocations as it grows). But .resize(foo) doesn't actually do what
people think; it resizes to foo buckets (which is really an
implementation detail the user of DenseMap probably shouldn't care about),
not the space required to fit foo elements. DenseMap grows if 3/4 of its
buckets are full, so this actually causes one forced reallocation every
time instead of avoiding a reallocation.
This patch makes .resize(foo) do the intuitive thing: it grows to the size
necessary to fit foo elements without new allocations.
Also include a test to verify that .resize() actually does what we think it
does.
llvm-svn: 263522
commit ae14bf6488e8441f0f6d74f00455555f6f3943ac
Author: Mehdi Amini <mehdi.amini@apple.com>
Date: Fri Mar 11 17:15:50 2016 +0000
Remove PreserveNames template parameter from IRBuilder
Summary:
Following r263086, we are now relying on a flag on the Context to
discard Value names in release builds.
Reviewers: chandlerc
Subscribers: mzolotukhin, llvm-commits
Differential Revision: http://reviews.llvm.org/D18023
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@263258
91177308-0d34-0410-b5e6-96231b3b80d8
until we can figure out what to do about clang and Release build testing.
This reverts commit 263258.
llvm-svn: 263321
Summary: As we now have unit-tests for UnrollAnalyzer, we can convert some existing tests to this format. It should make the tests more robust.
Reviewers: chandlerc, sanjoy
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D17904
llvm-svn: 263318
Summary:
Following r263086, we are now relying on a flag on the Context to
discard Value names in release builds.
Reviewers: chandlerc
Subscribers: mzolotukhin, llvm-commits
Differential Revision: http://reviews.llvm.org/D18023
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 263258
Added new string conversion wrappers that convert between `std::string` (of UTF-8 bytes) and `std::wstring`, which is particularly useful for Win32 interop. Also fixed a missing string conversion for `getenv` on Win32, using these new wrappers.
The motivation behind this is to provide the support functions required for LLDB to work properly on Windows with non-ASCII data; however, the functions are not LLDB specific.
Patch by cameron314
Differential Revision: http://reviews.llvm.org/D17549
llvm-svn: 263247
This was originally a pointer to support pass managers which didn't use
AnalysisManagers. However, that doesn't realistically come up much and
the complexity of supporting it doesn't really make sense.
In fact, *many* parts of the pass manager were just assuming the pointer
was never null already. This at least makes it much more explicit and
clear.
llvm-svn: 263219
clarify their purpose.
Firstly, call them "...Mixin" types so it is clear that there is no
type hierarchy being formed here. Secondly, use the term 'Info' to
clarify that they aren't adding any interesting *semantics* to the
passes or analyses, just exposing APIs used by the management layer to
get information about the pass or analysis.
Thanks to Manuel for helping pin down the naming confusion here and come
up with effective names to address it.
In case you already have some out-of-tree stuff, the following should be
roughly what you want to update:
perl -pi -e 's/\b(Pass|Analysis)Base\b/\1InfoMixin/g'
llvm-svn: 263217
work in the face of the limitations of DLLs and templated static
variables.
This requires passes that use the AnalysisBase mixin provide a static
variable themselves. So as to keep their APIs clean, I've made these
private and befriended the CRTP base class (which is the common
practice).
I've added documentation to AnalysisBase for why this is necessary and
at what point we can go back to the much simpler system.
This is clearly a better pattern than the extern template as it caught
*numerous* places where the template magic hadn't been applied and
things were "just working" but would eventually have broken
mysteriously.
llvm-svn: 263216
Without actually parsing a type it is difficult to perdict where
the type definition ends. In other words, instead of expecting
the user of the parser API to hand over only the relevant bits
of the string being parsed, take the whole string, parse the type,
and get back the number of characters that have been read.
This will be used by the MIR testing infrastructure.
llvm-svn: 262884
This is useful for MIR serialization. Indeed generic machine instructions
must have a type and we don't want to duplicate the logic in the MIParser.
llvm-svn: 262868
The ARM TargetParser would construct invalid StringRefs. This would cause
asserts to trigger. Add some tests in LLVM to ensure that we dont regress on
this in the future. Although there is a test for this in clang, this ensures
that the changes would get caught in the same repository.
llvm-svn: 262790
The RTDyldMemoryManager::getSymbolAddressInProcess method accepts a
linker-mangled symbol name, but it calls through to dlsym to do the lookup (via
DynamicLibrary::SearchForAddressOfSymbol), and dlsym expects an unmangled
symbol name.
Historically we've attempted to "demangle" by removing leading '_'s on all
platforms, and fallen back to an extra search if that failed. That's broken, as
it can cause symbols to resolve incorrectly on platforms that don't do mangling
if you query '_foo' and the process also happens to contain a 'foo'.
Fix this by demangling conditionally based on the host platform. That's safe
here because this function is specifically for symbols in the host process, so
the usual cross-process JIT looking concerns don't apply.
M unittests/ExecutionEngine/ExecutionEngineTest.cpp
M lib/ExecutionEngine/RuntimeDyld/RTDyldMemoryManager.cpp
llvm-svn: 262657
Summary: With discriminator, LineLocation can uniquely identify a callsite without the need to specifying callee name. Remove Callee function name from the key, and put it in the value (FunctionSamples).
Reviewers: davidxl, dnovillo
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D17827
llvm-svn: 262634
parts of the AA interface out of the base class of every single AA
result object.
Because this logic reformulates the query in terms of some other aspect
of the API, it would easily cause O(n^2) query patterns in alias
analysis. These could in turn be magnified further based on the number
of call arguments, and then further based on the number of AA queries
made for a particular call. This ended up causing problems for Rust that
were actually noticable enough to get a bug (PR26564) and probably other
places as well.
When originally re-working the AA infrastructure, the desire was to
regularize the pattern of refinement without losing any generality.
While I think it was successful, that is clearly proving to be too
costly. And the cost is needless: we gain no actual improvement for this
generality of making a direct query to tbaa actually be able to
re-use some other alias analysis's refinement logic for one of the other
APIs, or some such. In short, this is entirely wasted work.
To the extent possible, delegation to other API surfaces should be done
at the aggregation layer so that we can avoid re-walking the
aggregation. In fact, this significantly simplifies the logic as we no
longer need to smuggle the aggregation layer into each alias analysis
(or the TargetLibraryInfo into each alias analysis just so we can form
argument memory locations!).
However, we also have some delegation logic inside of BasicAA and some
of it even makes sense. When the delegation logic is baking in specific
knowledge of aliasing properties of the LLVM IR, as opposed to simply
reformulating the query to utilize a different alias analysis interface
entry point, it makes a lot of sense to restrict that logic to
a different layer such as BasicAA. So one aspect of the delegation that
was in every AA base class is that when we don't have operand bundles,
we re-use function AA results as a fallback for callsite alias results.
This relies on the IR properties of calls and functions w.r.t. aliasing,
and so seems a better fit to BasicAA. I've lifted the logic up to that
point where it seems to be a natural fit. This still does a bit of
redundant work (we query function attributes twice, once via the
callsite and once via the function AA query) but it is *exactly* twice
here, no more.
The end result is that all of the delegation logic is hoisted out of the
base class and into either the aggregation layer when it is a pure
retargeting to a different API surface, or into BasicAA when it relies
on the IR's aliasing properties. This should fix the quadratic query
pattern reported in PR26564, although I don't have a stand-alone test
case to reproduce it.
It also seems general goodness. Now the numerous AAs that don't need
target library info don't carry it around and depend on it. I think
I can even rip out the general access to the aggregation layer and only
expose that in BasicAA as it is the only place where we re-query in that
manner.
However, this is a non-trivial change to the AA infrastructure so I want
to get some additional eyes on this before it lands. Sadly, it can't
wait long because we should really cherry pick this into 3.8 if we're
going to go this route.
Differential Revision: http://reviews.llvm.org/D17329
llvm-svn: 262490
Summary:
This adds the beginning of an update API to preserve MemorySSA. In particular,
this patch adds a way to remove memory SSA accesses when instructions are
deleted.
It also adds relevant unit testing infrastructure for MemorySSA's API.
(There is an actual user of this API, i will make that diff dependent on this one. In practice, a ton of opt passes remove memory instructions, so it's hopefully an obviously useful API :P)
Reviewers: hfinkel, reames, george.burgess.iv
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D17157
llvm-svn: 262362
This adds support to convert ProfileSummary object to Metadata and create a
ProfileSummary object from metadata. This would allow attaching profile summary
information to Module allowing optimization passes to use it.
llvm-svn: 262360
analyses in the new pass manager.
These just handle really basic stuff: turning a type name into a string
statically that is nice to print in logs, and getting a static unique ID
for each analysis.
Sadly, the format of passes in anonymous namespaces makes using their
names in tests really annoying so I've customized the names of the no-op
passes to keep tests sane to read.
This is the first of a few simplifying refactorings for the new pass
manager that should reduce boilerplate and confusion.
llvm-svn: 262004
Summary: Check that we're using SCEV for the same loop we're simulating. Otherwise, we might try to use the iteration number of the current loop in SCEV expressions for inner/outer loops IVs, which is clearly incorrect.
Reviewers: chandlerc, hfinkel
Subscribers: sanjoy, llvm-commits, mzolotukhin
Differential Revision: http://reviews.llvm.org/D17632
llvm-svn: 261958
This creates the new-style LoopPassManager and wires it up with dummy
and print passes.
This version doesn't support modifying the loop nest at all. It will
be far easier to discuss and evaluate the approaches to that with this
in place so that the boilerplate is out of the way.
llvm-svn: 261831
This extracts the type name from __PRETTY_FUNCTION__ for compilers that
support it (I've opted Clang, GCC, and ICC into this as I've tested that
they work) and from __FUNCSIG__ which is very similar on MSVC. The
routine falls back gracefully on a stub "UNKNOWN_TYPE" string with
compilers or formats it doesn't understand.
This should be enough for a lot of common cases in LLVM where the real
goal is just to log or print a type name as a debugging aid, and save
a ton of boilerplate in the process. Notably, I'm planning to use this
to remove all the getName() boiler plate from the new pass manager.
The design and implementation is based on a bunch of advice and
discussion with Richard Smith and experimenting with most versions of
Clang and GCC. David Majnemer also provided excellent advice on how best
to do this with MSVC. Richard also checked that ICC does something
reasonable and I'll watch the build bots for other compilers. It'd be
great if someone could contribute logic for xlC and/or other toolchains.
Differential Revision: http://reviews.llvm.org/D17565
llvm-svn: 261819
pattern that triggers it. This essentially requires an immutable
function analysis, as that will survive anything we do to invalidate it.
When we have such patterns, the function analysis manager will not get
cleared between runs of the proxy.
If we actually need an assert about how things are queried, we can add
more elaborate machinery for computing it, but so far I'm not aware of
significant value provided.
Thanks to Justin Lebar for noticing this when he made a (seemingly
innocuous) change to FunctionAttrs that is enough to trigger it in one
test there. Now it is covered by a direct test of the pass manager code.
llvm-svn: 261627
system.
Previously, this was only being tested with larger integration tests.
That makes it hard to isolated specific issues with it, and makes the
APIs themselves less well tested. Add a unittest based around the same
patterns used for testing the general pass manager.
llvm-svn: 261624
Rename makeNoWrapRegion to a more obvious makeGuaranteedNoWrapRegion,
and add a comment about the counter-intuitive aspects of the function.
This is to help prevent cases like PR26628.
llvm-svn: 261532
Before this patch simplified SCEV expressions for PHI nodes were only returned
the very first time getSCEV() was called, but later calls to getSCEV always
returned the non-simplified value, which had "temporarily" been stored in the
ValueExprMap, but was never removed and consequently blocked the caching of the
simplified PHI expression.
llvm-svn: 261485
it to actually test the new pass manager AA wiring.
This patch was extracted from the (somewhat too large) D12357 and
rebosed on top of the slightly different design of the new pass manager
AA wiring that I just landed. With this we can start testing the AA in
a thorough way with the new pass manager.
Some minor cleanups to the code in the pass was necessitated here, but
otherwise it is a very minimal change.
Differential Revision: http://reviews.llvm.org/D17372
llvm-svn: 261403
analysis passes, support pre-registering analyses, and use that to
implement parsing and pre-registering a custom alias analysis pipeline.
With this its possible to configure the particular alias analysis
pipeline used by the AAManager from the commandline of opt. I've updated
the test to show this effectively in use to build a pipeline including
basic-aa as part of it.
My big question for reviewers are around the APIs that are used to
expose this functionality. Are folks happy with pass-by-lambda to do
pass registration? Are folks happy with pre-registering analyses as
a way to inject customized instances of an analysis while still using
the registry for the general case?
Other thoughts of course welcome. The next round of patches will be to
add the rest of the alias analyses into the new pass manager and wire
them up here so that they can be used from opt. This will require
extending the (somewhate limited) functionality of AAManager w.r.t.
module passes.
Differential Revision: http://reviews.llvm.org/D17259
llvm-svn: 261197
The commit breaks stage2 compilation on PowerPC. Reverting for now while
this is analyzed. I also have to revert the LiveIntervalTest for now as
that depends on this commit.
Revert "LiveIntervalAnalysis: Remove LiveVariables requirement"
This reverts commit r260806.
Revert "Remove an unnecessary std::move to fix -Wpessimizing-move warning."
This reverts commit r260931.
Revert "Fix typo in LiveIntervalTest"
This reverts commit r260907.
Revert "Add unittest for LiveIntervalAnalysis::handleMove()"
This reverts commit r260905.
llvm-svn: 261189
Modify ProfileSummary class to make it not instrumented profile specific.
Add a new InstrumentedProfileSummary class that inherits from ProfileSummary.
Differential Revision: http://reviews.llvm.org/D17310
llvm-svn: 261119
reference-edge SCCs.
This essentially builds a more normal call graph as a subgraph of the
"reference graph" that was the old model. This allows both to exist and
the different use cases to use the aspect which addresses their needs.
Specifically, the pass manager and other *ordering* constrained logic
can use the reference graph to achieve conservative order of visit,
while analyses reasoning about attributes and other properties derived
from reachability can reason about the direct call graph.
Note that this isn't necessarily complete: it doesn't model edges to
declarations or indirect calls. Those can be found by scanning the
instructions of the function if desirable, and in fact every user
currently does this in order to handle things like calls to instrinsics.
If useful, we could consider caching this information in the call graph
to save the instruction scans, but currently that doesn't seem to be
important.
An important realization for why the representation chosen here works is
that the call graph is a formal subset of the reference graph and thus
both can live within the same data structure. All SCCs of the call graph
are necessarily contained within an SCC of the reference graph, etc.
The design is to build 'RefSCC's to model SCCs of the reference graph,
and then within them more literal SCCs for the call graph.
The formation of actual call edge SCCs is not done lazily, unlike
reference edge 'RefSCC's. Instead, once a reference SCC is formed, it
directly builds the call SCCs within it and stores them in a post-order
sequence. This is used to provide a consistent platform for mutation and
update of the graph. The post-order also allows for very efficient
updates in common cases by bounding the number of nodes (and thus edges)
considered.
There is considerable common code that I'm still looking for the best
way to factor out between the various DFS implementations here. So far,
my attempts have made the code harder to read and understand despite
reducing the duplication, which seems a poor tradeoff. I've not given up
on figuring out the right way to do this, but I wanted to wait until
I at least had the system working and tested to continue attempting to
factor it differently.
This also requires introducing several new algorithms in order to handle
all of the incremental update scenarios for the more complex structure
involving two edge colorings. I've tried to comment the algorithms
sufficiently to make it clear how this is expected to work, but they may
still need more extensive documentation.
I know that there are some changes which are not strictly necessarily
coupled here. The process of developing this started out with a very
focused set of changes for the new structure of the graph and
algorithms, but subsequent changes to bring the APIs and code into
consistent and understandable patterns also ended up touching on other
aspects. There was no good way to separate these out without causing
*massive* merge conflicts. Ultimately, to a large degree this is
a rewrite of most of the core algorithms in the LCG class and so I don't
think it really matters much.
Many thanks to the careful review by Sanjoy Das!
Differential Revision: http://reviews.llvm.org/D16802
llvm-svn: 261040
Add support for trimming a single kind of character from a StringRef.
This makes the common case of trimming null bytes much neater. It's also
probably a bit speedier too, since it avoids creating a std::bitset in
find_{first,last}_not_of.
llvm-svn: 260925
Summary:
Export the CloneDebugInfoMetadata utility, which clones all debug info
associated with a function into the first module. Also use this function
in CloneModule on each function we clone (the CloneFunction entrypoint
already does this).
Without this, cloning a module will lead to DI quality regressions,
especially since r252219 reversed the Function <-> DISubprogram edge
(before we could get lucky and have this edge preserved if the
DISubprogram itself was, e.g. due to location metadata).
This was verified to fix missing debug information in julia and
a unittest to verify the new behavior is included.
Patch by Yichao Yu! Thanks!
Reviewers: loladiro, pcc
Differential Revision: http://reviews.llvm.org/D17165
llvm-svn: 260791
As support expands to more runtimes, we'll need to
distinguish between more than just HSA and unknown.
This also lets us stop using unknown everywhere.
llvm-svn: 260790
Add another interface to function annotateValueSite() which directly uses the
VauleData array.
Differential Revision: http://reviews.llvm.org/D17108
llvm-svn: 260741
The patch adds a parameter in annotateValueSite() to control the max number
of records written to the value profile meta data for each value site. The
default is kept as the current value of 3.
Differential Revision: http://reviews.llvm.org/D17084
llvm-svn: 260450
Patch by Rong Xu
The problem is exposed by intra-module indirect call promotion where
prof symtab is created from module which does not contain all symbols
from the program. With partial symtab, the result needs to be checked
more strictly.
llvm-svn: 260361
This patch adds a new class, OrcI386, which contains the hooks needed to
support lazy-JITing on i386 (currently only for Pentium 2 or above, as the JIT
re-entry code uses the FXSAVE/FXRSTOR instructions).
Support for i386 is enabled in the LLI lazy JIT and the Orc C API, and
regression and unit tests are enabled for this architecture.
llvm-svn: 260338
This pass implements whole program optimization of virtual calls in cases
where we know (via bitset information) that the list of callees is fixed. This
includes the following:
- Single implementation devirtualization: if a virtual call has a single
possible callee, replace all calls with a direct call to that callee.
- Virtual constant propagation: if the virtual function's return type is an
integer <=64 bits and all possible callees are readnone, for each class and
each list of constant arguments: evaluate the function, store the return
value alongside the virtual table, and rewrite each virtual call as a load
from the virtual table.
- Uniform return value optimization: if the conditions for virtual constant
propagation hold and each function returns the same constant value, replace
each virtual call with that constant.
- Unique return value optimization for i1 return values: if the conditions
for virtual constant propagation hold and a single vtable's function
returns 0, or a single vtable's function returns 1, replace each virtual
call with a comparison of the vptr against that vtable's address.
Differential Revision: http://reviews.llvm.org/D16795
llvm-svn: 260312
compiler-specific issues. Instead, repeat an 'operator delete' definition in
each derived class that is actually deleted, and give up on the static type
safety of an error when sized delete is accidentally used on a type derived
from TrailingObjects.
llvm-svn: 260190
This fixes undefined behavior in C++14 due to the size of the object being
deleted being different from sizeof(dynamic type) when it is allocated with
trailing objects.
MSVC seems to have several bugs around using-declarations changing the access
of a member inherited from a base class, so use forwarding functions instead of
using-declarations to make TrailingObjects::operator delete accessible where
desired.
llvm-svn: 260180
Summary:
Unrolling Analyzer is already pretty complicated, and it becomes harder and harder to exercise it with usual IR tests, as with them we can only check the final decision: whether the loop is unrolled or not. This change factors this framework out from LoopUnrollPass to analyses, which allows to use unit tests.
The change itself is supposed to be NFC, except adding a couple of tests.
I plan to add more tests as I add new functionality and find/fix bugs.
Reviewers: chandlerc, hfinkel, sanjoy
Subscribers: zzheng, sanjoy, llvm-commits
Differential Revision: http://reviews.llvm.org/D16623
llvm-svn: 260169
The Windows bots have been failing for the last two days, with:
FAILED: C:\PROGRA~2\MICROS~1.0\VC\bin\amd64\cl.exe -c LLVMContextImpl.cpp
D:\buildslave\clang-x64-ninja-win7\llvm\lib\IR\LLVMContextImpl.cpp(137) :
error C2248: 'llvm::TrailingObjects<llvm::AttributeSetImpl,
llvm::IndexAttrPair>::operator delete' :
cannot access private member declared in class 'llvm::AttributeSetImpl'
TrailingObjects.h(298) : see declaration of
'llvm::TrailingObjects<llvm::AttributeSetImpl,
llvm::IndexAttrPair>::operator delete'
AttributeImpl.h(213) : see declaration of 'llvm::AttributeSetImpl'
llvm-svn: 260053
-fsized-deallocation. Disable sized deallocation for all objects derived from
TrailingObjects, as we expect the storage allocated for these objects to be
larger than the size of their dynamic type.
llvm-svn: 259942
Unfortunately, ProgramInfo::ProcessId is signed on Unix and unsigned on
Windows, breaking the standard fix of using '0U' in the gtest
expectation.
llvm-svn: 259704
With this patch, the profile summary data will be available in indexed
profile data file so that profiler reader/compiler optimizer can start
to make use of.
Differential Revision: http://reviews.llvm.org/D16258
llvm-svn: 259626
differentiate between indirect references to functions an direct calls.
This doesn't do a whole lot yet other than change the print out produced
by the analysis, but it lays the groundwork for a very major change I'm
working on next: teaching the call graph to actually be a call graph,
modeling *both* the indirect reference graph and the call graph
simultaneously. More details on that in the next patch though.
The rest of this is essentially a bunch of over-engineering that won't
be interesting until the next patch. But this also isolates essentially
all of the churn necessary to introduce the edge abstraction from the
very important behavior change necessary in order to separately model
the two graphs. So it should make review of the subsequent patch a bit
easier at the cost of making this patch seem poorly motivated. ;]
Differential Revision: http://reviews.llvm.org/D16038
llvm-svn: 259463
With poorly chosen custom parameters, the line table encoding logic would
sometimes end up generating a special opcode bigger than 255, which is wrong.
The set of default parameters that LLVM uses isn't subject to this bug.
When carefully chosing the line table parameters, it's impossible to fall into the
corner case that this patch fixes. The standard however doesn't require that these
parameters be carefully chosen. And even if it did, we shouldn't generate broken
encoding.
Add a unittest for this specific encoding bug, and while at it, create some unit
tests for the encoding logic using different sets of parameters.
llvm-svn: 259334
Add an option to llvm-profdata merge for writing out sparse indexed
profiles. These profiles omit InstrProfRecords for functions which are
never executed.
Differential Revision: http://reviews.llvm.org/D16727
llvm-svn: 259258
This reverts commit r259117.
The LineInfo constructor is defined in the codeview library and we have
to link against it now. Doing that isn't trivial, so reverting for now.
llvm-svn: 259126
Adds a new family of .cv_* directives to LLVM's variant of GAS syntax:
- .cv_file: Similar to DWARF .file directives
- .cv_loc: Similar to the DWARF .loc directive, but starts with a
function id. CodeView line tables are emitted by function instead of
by compilation unit, so we needed an extra field to communicate this.
Rather than overloading the .loc direction further, we decided it was
better to have our own directive.
- .cv_stringtable: Emits the codeview string table at the current
position. Currently this just contains the filenames as
null-terminated strings.
- .cv_filechecksums: Emits the file checksum table for all files used
with .cv_file so far. There is currently no support for emitting
actual checksums, just filenames.
This moves the line table emission code down into the assembler. This
is in preparation for implementing the inlined call site line table
format. The inline line table format encoding algorithm requires knowing
the absolute code offsets, so it must run after the assembler has laid
out the code.
David Majnemer collaborated on this patch.
llvm-svn: 259117
at least as big as the mach header to be identified as a Mach-O file and
make sure smaller files are not identified as a Mach-O files but as
unknown files. Also fix identify_magic() so it looks at all 4 bytes of
the filetype field when determining the type of the Mach-O file.
Then fix the macho-invalid-header test case to check that it is an
unknown file and make sure it does not get the error for
object_error::parse_failed. And also update the unit tests.
llvm-svn: 258883
Summary:
This patch is provided in preparation for removing autoconf on 1/26. The proposal to remove autoconf on 1/26 was discussed on the llvm-dev thread here: http://lists.llvm.org/pipermail/llvm-dev/2016-January/093875.html
"I felt a great disturbance in the [build system], as if millions of [makefiles] suddenly cried out in terror and were suddenly silenced. I fear something [amazing] has happened."
- Obi Wan Kenobi
Reviewers: chandlerc, grosbach, bob.wilson, tstellarAMD, echristo, whitequark
Subscribers: chfast, simoncook, emaste, jholewinski, tberghammer, jfb, danalbert, srhines, arsenm, dschuff, jyknight, dsanders, joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D16471
llvm-svn: 258861
Igor Kudrin