This is the Linux counterpart to the sampling support I added
on the macOS side.
This change also introduces zip-file compression if the size of
the sample output is greater than 10 KB. The Linux side can be
quite large and the textual content is averaging over a 10x
compression factor on tests that I force to time out. When
compression takes place, the filename becomes:
{session_dir}/{TestFilename.py}-{pid}.sample.zip
This support relies on the linux 'perf' tool. If it isn't
present, the behavior is to ignore pre-kill processing of
the timed out test process.
Note calling the perf tool under the timeout command appears
to nuke the profiled process. This was causing the timeout
kill logic to fail due to the process having disappeared.
I modified the kill logic to catch the case of the process
not existing, and I have it ignore the kill request in that
case. Any other exception is still raised.
Reviewers: labath
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D24890
llvm-svn: 282436
This allows debugging of the JIT and other analyses of the internals of the
expression parser. I've also added a testcase that verifies that the setting
works correctly when off and on.
llvm-svn: 282434
CommandData breakpoint commands didn't know whether they were
Python or Command line commands, so they couldn't serialize &
deserialize themselves properly. Fix that.
I also changed the "breakpoint list" command to note in the output
when the commands are Python commands. Fortunately only one test
was relying on this explicit bit of text output.
llvm-svn: 282432
Summary:
This alters the generation of LLDB_REVISION to be heavily based on how clang generates its version header. There are two benefits of this aproach.
(1) The LLDB_REVISION is generated at build time, so it will be updated after an SCM pull/update even if CMake doesn't re-run
(2) This works on Windows
As noted this code is a simplified implementation of the code from clang.
Reviewers: tfiala, zturner
Subscribers: beanz, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D24846
llvm-svn: 282314
Summary:
The current implementation of the test suite allows the user to run
a certain subset of tests using '-p', but does not allow the inverse,
where a user wants to run all but some number of known failing tests.
Implement this functionality.
Reviewers: labath, zturner, tfiala
Subscribers: jingham, sas, lldb-commits
Differential Revision: https://reviews.llvm.org/D24629
llvm-svn: 282298
This code was adding an explicit dependency on libclang because lldb needs clang headers, changing this to instead depend on the clang tablegen targets means we don't have to depend on building the clang bits in libclang that lldb doesn't need.
Note this is still a bit of a hack because we're adding the dependency to all lldb libraries, instead of just the ones that need it.
llvm-svn: 282196
This change is very mechanical. All it does is change the
signature of `Options::GetDefinitions()` and `OptionGroup::
GetDefinitions()` to return an `ArrayRef<OptionDefinition>`
instead of a `const OptionDefinition *`. In the case of the
former, it deletes the sentinel entry from every table, and
in the case of the latter, it removes the `GetNumDefinitions()`
method from the interface. These are no longer necessary as
`ArrayRef` carries its own length.
In the former case, iteration was done by using a sentinel
entry, so there was no knowledge of length. Because of this
the individual option tables were allowed to be defined below
the corresponding class (after all, only a pointer was needed).
Now, however, the length must be known at compile time to
construct the `ArrayRef`, and as a result it is necessary to
move every option table before its corresponding class. This
results in this CL looking very big, but in terms of substance
there is not much here.
Differential revision: https://reviews.llvm.org/D24834
llvm-svn: 282188
This started failing recently:
TestDarwinLogSourceDebug.py
It looks like the behavior of specifying the OS_ACTIVITY_MODE
env var with no value used to work for no-info/no-debug content.
That doesn't appear to be the case now. Switch to specifying
the proper value ('default') when no info-level and no debug-level
content is expected.
llvm-svn: 282172
Also fixed up a couple misbehaving functions. It is perfectly
legal to have env vars with no values (i.e. the '=' and following
need not be present).
llvm-svn: 282171
The test exposed a bug in the StructuredData Serialization code, which did not
escape the backslash properly. This manifested itself as windows breakpoint
serialization roundtrip test not succeeding (as windows paths included
backslashes).
llvm-svn: 282167
Summary:
When extracting options for long options (starting with `--`), the use of
`MIUtilString::SplitConsiderQuotes` to split all the arguments was being
conditioned on the option type to be expected. This was wrong as this caused
other options to be parsed incorrectly since it was not taking into account the
presence of quotes.
Patch by Ed Munoz <edmunoz@microsoft.com>
Reviewers: edmunoz, ki.stfu
Subscribers: ki.stfu, lldb-commits
Projects: #lldb
Differential Revision: https://reviews.llvm.org/D24202
llvm-svn: 282135
The method was hard-coded to check only the 0th element of the array.
This manifested as NSLog messages behaving incorrectly on macOS.
(This is independent of the broken DarwinLog feature).
llvm-svn: 282128
The switch coveres all possible values. If a new one is added in the
future the compiler will start warning, providing a notification that
the switch needs updating.
llvm-svn: 282111
Summary:
This patch adds a CMake option LLDB_BUILD_FRAMEWORK, which builds libLLDB as a macOS framework instead of as a *nix shared library.
With this patch any LLDB executable that has the INCLUDE_IN_FRAMEWORK option set will be built into the Framework's resources directory, and a symlink to the exeuctable will be placed under the build directory's bin folder. Creating the symlinks allows users to run commands from the build directory without altering the workflow.
The framework generated by this patch passes the LLDB test suite, but has not been tested beyond that. It is not expected to be fully ready to ship, but it is a first step.
With this patch binaries that are placed inside the framework aren't being properly installed. Fixing that would increase the patch size significantly, so I'd like to do that in a follow-up.
Reviewers: zturner, tfiala
Subscribers: beanz, lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D24749
llvm-svn: 282110
This change introduces optional marking of the column within a source
line where a thread is stopped. This marking will show up when the
source code for a thread stop is displayed, when the debug info
knows the column information, and if the optional column marking is
enabled.
There are two separate methods for handling the marking of the stop
column:
* via ANSI terminal codes, which are added inline to the source line
display. The default ANSI mark-up is to underline the column.
* via a pure text-based caret that is added in the appropriate column
in a newly-inserted blank line underneath the source line in
question.
There are some new options that control how this all works.
* settings set stop-show-column
This takes one of 4 values:
* ansi-or-caret: use the ANSI terminal code mechanism if LLDB
is running with color enabled; if not, use the caret-based,
pure text method (see the "caret" mode below).
* ansi: only use the ANSI terminal code mechanism to highlight
the stop line. If LLDB is running with color disabled, no
stop column marking will occur.
* caret: only use the pure text caret method, which introduces
a newly-inserted line underneath the current line, where
the only character in the new line is a caret that highlights
the stop column in question.
* none: no stop column marking will be attempted.
* settings set stop-show-column-ansi-prefix
This is a text format that indicates the ANSI formatting
code to insert into the stream immediately preceding the
column where the stop column character will be marked up.
It defaults to ${ansi.underline}; however, it can contain
any valid LLDB format codes, e.g.
${ansi.fg.red}${ansi.bold}${ansi.underline}
* settings set stop-show-column-ansi-suffix
This is the text format that specifies the ANSI terminal
codes to end the markup that was started with the prefix
described above. It defaults to: ${ansi.normal}. This
should be sufficient for the common cases.
Significant leg-work was done by Adrian Prantl. (Thanks, Adrian!)
differential review: https://reviews.llvm.org/D20835
reviewers: clayborg, jingham
llvm-svn: 282105
r282079 converted the regular expression interface to accept
and return StringRefs instead of char pointers. In one case
a null pointer check was converted to an empty string check,
but this was an incorrect conversion because an empty string
is a valid regular expression. Removing this check should
fix the test failures.
llvm-svn: 282090
This updates getters and setters to use StringRef instead of
const char *. I tested the build on Linux, Windows, and OSX
and saw no build or test failures. I cannot test any BSD
or Android variants, however I expect the required changes
to be minimal or non-existant.
llvm-svn: 282079
This patch refactors the way the XState type is checked and, in order to
simplify the code, it removes the usage of the 'cpuid' instruction: just checking
if the ptrace calls done throuhg ReadFPR is enough to verify both if there is
HW support and if there is kernel support. Also the XCR0 bits are enough to check if
there is both HW and kernel support for AVX and MPX.
Differential Revision: https://reviews.llvm.org/D24764
llvm-svn: 282072
Serialize breakpoint names & the hardware_requested attributes.
Also added a few missing affordances to SBBreakpoint whose absence
writing the tests pointed out.
<rdar://problem/12611863>
llvm-svn: 282036
This converts Args::Unshift, Args::AddOrReplaceEnvironmentVariable,
and Args::ContainsEnvironmentVariable to use StringRefs. The code
is also simplified somewhat as a result.
llvm-svn: 281942
This patch also marks the const char* versions as =delete to prevent
their use. This has the potential to cause build breakages on some
platforms which I can't compile. I have tested on Windows, Linux,
and OSX. Best practices for fixing broken callsites are outlined in
Args.h in a comment above the deleted function declarations.
Eventually we can remove these =delete declarations, but for now they
are important to make sure that all implicit conversions from
const char * are manually audited to make sure that they do not invoke a
conversion from nullptr.
llvm-svn: 281919
This change adds support for the gtests that require input data
in the Inputs files. This is done through a new Xcode script
phase that runs the scripts/Xcode/prepare-gtest-run-dir.sh script.
That script simply copies the contents of all unittests/**/Inputs
dirs into ${TARGET_BUILD_DIR}/Inputs before running the test.
This change also renames the Xcode 'gtest-for-debugging' to
'gtest-build', and makes the gtest "build and run" target
depend on gtest-build. This reduces replication within the
targets. gtest .c/.cpp files now should only be added to
the gtest-build target.
llvm-svn: 281913
Where possible, remove the const char* version. To keep the
risk and impact here minimal, I've only done the simplest
functions.
In the process, I found a few opportunities for adding some
unit tests, so I added those as well.
Tested on Windows, Linux, and OSX.
llvm-svn: 281799
Initial implementation of support for tracking
[RenderScript Reductions](https://developer.android.com/guide/topics/renderscript/compute.html#reduction-in-depth)
With this patch, `language renderscript module dump` properly lists reductions
that are part of loaded RenderScript modules as well the the consituent
functions and their roles, within the reduction.
This support required new tracking mechanisms for the `#pragma(reduce)`
mechanism, and extension of `RSModuleDescriptor::ParseRSInfo` to support
the metadata output by `bcc`. This work was also an opportunity to
refactor/improve parse code:
- `RSModuleDescriptor::ParseExportReduceCount` now has a complete
implementation and the debugger can correctly track reductions on
receipt of a module hook.
- `RSModuleDescriptor::Dump` now dumps Reductions as well as `ForEach`
kernels. Also, fixed indentation of the output, and made indentation
groupings in the source clearer.
- `RSModuleDescriptor::ParseRSInfo` now returns true if the `".rs.info"`
packet has nonzero linecount, rather than rejecting RenderScripts that
don't contain kernels (an unlikely situation, but possibly valid). This
was changed because scripts that only contained reductions were not
being tracked in `RenderScriptRuntime::LoadModule`.
- Refactor `RSModuleInfo::ParseRSInfo` and add reduction spec parser stub
- Prepared ParseRSInfo to more easily be able to add new parser types
- Use llvm::StringRef and llvm::StringMap helpers to make the parsing code cleaner
- factor out forEachCount, globalVarCount, and pragmaCount parsing block to their own methods
- Add ExportReduceCount Parser
- Use `llvm::StringRef` in `RSKernelDescriptor` constructor
- removed now superfluous `MAXLINE` macros as we've switched from `const
char *` to `llvm::StringRef`
llvm-svn: 281717
The pexpect-based tests properly checked for the stub reporting
DarwinLog support. The event-based ones did not. This is fixed
here. Swift CI bots are not currently building debugserver on
macOS, so they don't have the DarwinLog support even when they
pass the macOS 10.12 check.
llvm-svn: 281696
Summary:
This patch supplies basic infrastructure for LLDB to use LIT, and ports a few basic test cases from the LLDB test suite into LIT.
With this patch the LLDB lit system is not capable or intended to fully replace the existing LLDB test suite, but this first patch enables people to write lit tests for LLDB.
The lit substitution for %cc and %cxx default to the host compiler unless the CMake option LLDB_TEST_CLANG is On, in which case the in-tree clang will be used.
The target check-lldb-lit will run all lit tests including the lit-based executor for the unit tests. Alternatively there is a target generated for each subdirectory under the lit directory, so check-lldb-unit and check-lldb-expr will run just the tests under their respective directories.
The ported tests are not removed from the existing suite, and should not be until such a time when the lit runner is mature and in use by bots and workflows.
Reviewers: zturner, labath, jingham, tfiala
Subscribers: beanz, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D24591
llvm-svn: 281651
This makes the code easier to grok, and since this is a very low
level function it also is very helpful to have this take a StringRef
since it means anyone higher up the chain who has a StringRef would
have to first convert it to a null-terminated string. This way it
can work equally well with StringRefs or const char*'s, which will
enable the conversion of higher up functions to StringRef.
Tested on Windows, Linux, and OSX and saw no regressions.
llvm-svn: 281642
This Xcode build variable defaults to x86_64. It can be set to i386
to cause the lldb-python-test-suite target run the tests in the
specified architecture.
This flag is being added for the zorg build script so that Green Dragon
can run the test suite against both x86_64 and i386 macOS targets.
llvm-svn: 281639
It is a new attribute emitted by clang as a GNU extension and will
be part of Dwarf5. The purpose of the attribute is to specify a compile
unit level base value for all DW_AT_ranges to reduce the number of
relocations have to be done by the linker.
Fixes (at least partially): https://llvm.org/pr28826
Differential revision: https://reviews.llvm.org/D24514
llvm-svn: 281595
Thanks to Zachary Turner for the suggestion. It's distasteful that the actual
type of the lambda can't be spelled out, but it should be evident from the
definition of the lambda body.
llvm-svn: 281536
Moved the guts of the code from CommandObjectBreakpoint to Target (should
have done it that way in the first place.) Added an SBBreakpointList class
so there's a way to specify which breakpoints to serialize and to report the
deserialized breakpoints.
<rdar://problem/12611863>
llvm-svn: 281520
Summary:
This patch uses the instruction CPUID to verify that FXSAVE, XSAVE, AVX
and MPX are supported by the target hardware. In case the HW supports XSAVE,
and at least one of the extended register sets, it further checks if the
target software has the kernel support for such features, by verifying that
their XSAVE part is correctly managed.
Differential Revision: https://reviews.llvm.org/D24559
llvm-svn: 281507
VS 2015 and higher begin making use of c++14 in their standard
library headers. As such, -std=c++11 makes it so you can't compile
trivial programs. Bump this to -std=c++14 when this situation is
detected.
llvm-svn: 281420
using to enqueue all the jobs wasn't enough time on a slow/overloaded
system. Instead use a global to indicate when all the work has
been enqueued, let's see if this makes the CIs work more reliably.
llvm-svn: 281418
I'm was trying to do some cleanup and code modernization and in
doing so I needed to change ParseMachCPUDashSubtypeTriple to take
a StringRef. To ensure I don't break anything, I'm adding some
unit tests for this function. As a side benefit, this also expands
test coverage of this function to all platforms, since in general
this code would rarely be exercised on non Mac platforms, and never
in the test suite.
llvm-svn: 281387
Plumb unique_ptrs<> all the way through the baton interface.
NFC, this is a minor improvement to remove the possibility of an
accidental pointer ownership issue.
Reviewed By: jingham
Differential Revision: https://reviews.llvm.org/D24495
llvm-svn: 281360
Summary:
Added parsing of the MiscInfo data stream.
The main member of it that we care about is the process_id
On Linux generated Minidump (from breakpad) we don't have
the MiscInfo, we have the /proc/$pid/status from where we can get the
pid.
Also parsing the module list - the list of all of the loaded
modules/shared libraries.
Parsing the exception stream.
Parsing MinidumpStrings.
I have unit tests for all of that.
Also added some tests using a Minidump generated from Windows tools (not
from breakpad)
Reviewers: labath, zturner
Subscribers: beanz, lldb-commits
Differential Revision: https://reviews.llvm.org/D24385
llvm-svn: 281348
the expectedFlakeyDarwin annotation.
I've been running this test in isolation on my macOS Sierra system
and haven't seen a failure in 20-30 runs. The number of simultaneous
debug sessions that it spins up could be a problem when the testbots
are running under load, so I'm reducing this from 20 simultaneous
debug sessions to see if we can get enough stability to leave this
enabled.
llvm-svn: 281291
Still to come:
1) SB API's
2) Testcases
3) Loose ends:
a) serialize Thread options
b) serialize Exception resolvers
4) "break list --file" should list breakpoints contained in a file and
"break read -f 1 3 5" should then read in only those breakpoints.
<rdar://problem/12611863>
llvm-svn: 281273
It looks like the message-content-retrieval aspect of DarwinLog
support is flaky, not just the regex match against it. Slightly
less frequently than the regex matching, I am seeing the
direct string-match variant of log-message-content matching
also fail.
Tracked by:
llvm.org/pr30299
rdar://28237450
llvm-svn: 281251
The class is only used in the debugserver. The rest of lldb has the StringExtractor class.
Xcode project will need to be updated after this.
llvm-svn: 281226
Summary: This patch adds a new test and fixes extra new-line before exit
Reviewers: abidh
Subscribers: ki.stfu, dawn, lldb-commits, abidh
Differential Revision: https://reviews.llvm.org/D9740
llvm-svn: 281199
Summary:
It fixes the following compile warnings:
1. '0' flag ignored with precision and ‘%d’ gnu_printf format
2. enumeral and non-enumeral type in conditional expression
3. format ‘%d’ expects argument of type ‘int’, but argument 4 has type ...
4. enumeration value ‘...’ not handled in switch
5. cast from type ‘const uint64_t* {aka ...}’ to type ‘int64_t* {aka ...}’ casts away qualifiers
6. extra ‘;’
7. comparison between signed and unsigned integer expressions
8. variable ‘register_operand’ set but not used
9. control reaches end of non-void function
Reviewers: jingham, emaste, zturner, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D24331
llvm-svn: 281191
This change does the following:
* Changes the signature for the continuation delegate method that handles
async structured data from accepting an already-parsed structured data
element to taking just the packet contents.
* Moves the conversion of the JSON-async: packet contents from
GDBRemoteClientBase to the continuation delegate method.
* Adds a new unit test for verifying that the $JSON-asyc: packets get
decoded and that the decoded packets get forwarded on to the delegate
for further processing. Thanks to Pavel for making that whole section of
code easily unit testable!
* Tightens up the packet verification on reception of a $JSON-async:
packet contents. The code prior to this change is susceptible to a
segfault if a packet is carefully crafted that starts with $J but
has a total length shorter than the length of "$JSON-async:".
Reviewers: labath, clayborg, zturner
Differential Revision: https://reviews.llvm.org/D23884
llvm-svn: 281121
Summary:
LLVM guys did some clean-up of the Attribute getters/setters
and because of that the build was failing.
Reviewers: ldrumm
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D24382
llvm-svn: 281030
The behaviour of FileSpec differed between host OS versions. Hardcode the path
syntax to posix, as we don't care about that in this test.
llvm-svn: 281025
The switch coveres all possible values. If a new one is added in the
future the compiler will start warning, providing a notification that
the switch needs updating.
llvm-svn: 280933
Summary:
- Added an API to public interface that provides permissions (RWX) of
individual sections of an object file
- Earlier, there was no way to find out this information through SB
APIs
- A possible use case of this API is:
when a user wants to know the sections that have executable machine
instructions and want to write a tool on top of LLDB based on this
information
- Differential Revision: https://reviews.llvm.org/D24251
llvm-svn: 280924
It turns out that self.dbg.GetSelectedPlatform().GetTriple() is not a good way
to get the triple of the process, as it returns the incorrect triple in case of a
32-bit process running on a 64-bit platform.
Instead, go the long way round and ask the stub for the process triple. This
fixes the test for i386.
llvm-svn: 280922
Summary:
This adds the jModulesInfo packet, which is the equivalent of qModulesInfo, but it enables us to
query multiple modules at once. This makes a significant speed improvement in case the
application has many (over a hundred) modules, and the communication link has a non-negligible
latency. This functionality is accessed by ProcessGdbRemote::PrefetchModuleSpecs(), which does
the caching. GetModuleSpecs() is modified to first consult the cache before asking the remote
stub. PrefetchModuleSpecs is currently only called from POSIX-DYLD dynamic loader plugin, after
it reads the list of modules from the inferior memory, but other uses are possible.
This decreases the attach time to an android application by about 40%.
Reviewers: clayborg
Subscribers: tberghammer, lldb-commits, danalbert
Differential Revision: https://reviews.llvm.org/D24236
llvm-svn: 280919
mode in lldb works. I've been discussing this with Jim Ingham,
Greg Clayton, and Kate Stone for the past week or two.
Previously lldb would print three source lines (centered on the
line table entry line for the current line) followed by the assembly.
It would print the context information (module`function + offset)
before those three lines of source.
Now lldb will print up to two lines before/after the line table
entry. It prints two '*' characters for the line table line to
make it clear what line is showing assembly. There is one line of
whitespace before/after the source lines so the separation between
source & assembly is clearer. I don't print the context line
(module`function + offset). I stop printing context lines if it's
a different line table entry, or if it's a source line I've already
printed as context to another source line. If I have two line table
entries one after another for the same source line (I get these often
with clang - with different column information in them), I only print
the source line once.
I'm also using the target.process.thread.step-avoid-regexp setting
(which keeps you from stepping into STL functions that have been inlined
into your own code) and avoid printing any source lines from functions
that match that regexp.
When lldb disassembles into a new function, it will try to find the
declaration line # for the function and print all of the source lines
between the decl and the first line table entry (usually a { curly brace)
so we have a good chance of including the arguments, at least with the
debug info emitted by clang.
Finally, the # of source lines of context to show has been separated
from whether we're doing mixed source & assembly or not. Previously
specifying 0 lines of context would turn off mixed source & assembly.
I think there's room for improvement, and maybe some bugs I haven't
found yet, but it's in good enough shape to upstream and iterate at
this point.
I'm not sure how best to indicate which source line is the actual line
table # versus context lines. I'm using '**' right now. Both Kate
and Greg had the initial idea to reuse '->' (normally used to indicate
"currently executing source line") - I tried it but I wasn't thrilled,
I'm too used to the established meaning of ->.
Greg had the interesting idea of avoiding context source lines only
in two line table entries in the same source file. So we'd print
two lines before & after a source line, and then the next line table
entry (if it was on the next source line after those two context lines)
we'd display only the following two lines -- the previous two had just
been printed. If an inline source line was printed between these two,
though, we'd print the context lines for both of them. It's an
interesting idea, and I want to see how it works with both -O0 and -O3
codegen where we have different amounts of inlining.
<rdar://problem/27961419>
llvm-svn: 280906
macro, so writing ::dispatch_release did not work as expected.
Remove the global anon namespace :: designation; the header will
get us the correct declaration.
llvm-svn: 280903
Function::GetStartLineSourceInfo before we try to
return the start line information about a function;
this function requires it to have been initialized.
llvm-svn: 280902
After the reformat, the unittests do not compile due to missing due to redefinition errors
between PosixApi.h and ucrt/direct.h. This is a bit of a shot in the dark, as I have not tested
it on windows, but I am restoring the original include order, so it should hopefully fix it.
llvm-svn: 280793
This wasn't actually a problem with the reformat, but rather a
problem with Visual Studio 2015 Update 3, which uses some c++14
features in its standard libraries. So we had to change -std=c++11
to -std=c++14.
llvm-svn: 280759
Most of these issues arose as a result of header re-ordering, but
it turned up a real bug, which is that MSVC doesn't support
__attribute__((packed)) or __attribute__((aligned)). This was
working before because there's a Windows header that #defines
__attribute__(x) to nothing. We should fix this by removing
that #define entirely, and dealing with the fallout separately
which may turn up even more bugs.
I fixed this by replacing them with the corresponding LLVM
macros which understand how to do these operations on all the
different compilers.
llvm-svn: 280757
*** to conform to clang-format’s LLVM style. This kind of mass change has
*** two obvious implications:
Firstly, merging this particular commit into a downstream fork may be a huge
effort. Alternatively, it may be worth merging all changes up to this commit,
performing the same reformatting operation locally, and then discarding the
merge for this particular commit. The commands used to accomplish this
reformatting were as follows (with current working directory as the root of
the repository):
find . \( -iname "*.c" -or -iname "*.cpp" -or -iname "*.h" -or -iname "*.mm" \) -exec clang-format -i {} +
find . -iname "*.py" -exec autopep8 --in-place --aggressive --aggressive {} + ;
The version of clang-format used was 3.9.0, and autopep8 was 1.2.4.
Secondly, “blame” style tools will generally point to this commit instead of
a meaningful prior commit. There are alternatives available that will attempt
to look through this change and find the appropriate prior commit. YMMV.
llvm-svn: 280751
MSVC emits an error when one uses a const variable in a lambda without
capturing it.
gcc and clang don't emit an error in this scenario.
llvm-svn: 280707
This reverts commit rL280668 because the register tests fail on i386
Linux.
I investigated a little bit what causes the failure - there are missing
registers when running 'register read -a'.
This is the output I got at the bottom:
"""
...
Memory Protection Extensions:
bnd0 = {0x0000000000000000 0x0000000000000000}
bnd1 = {0x0000000000000000 0x0000000000000000}
bnd2 = {0x0000000000000000 0x0000000000000000}
bnd3 = {0x0000000000000000 0x0000000000000000}
unknown:
2 registers were unavailable.
"""
Also looking at the packets exchanged between the client and server:
"""
...
history[308] tid=0x7338 < 19> send packet: $qRegisterInfo4a#d7
history[309] tid=0x7338 < 130> read packet:
$name:bnd0;bitsize:128;offset:1032;encoding:vector;format:vector-uint64;set:Memory
Protection Extensions;ehframe:101;dwarf:101;#48
history[310] tid=0x7338 < 19> send packet: $qRegisterInfo4b#d8
history[311] tid=0x7338 < 130> read packet:
$name:bnd1;bitsize:128;offset:1048;encoding:vector;format:vector-uint64;set:Memory
Protection Extensions;ehframe:102;dwarf:102;#52
history[312] tid=0x7338 < 19> send packet: $qRegisterInfo4c#d9
history[313] tid=0x7338 < 130> read packet:
$name:bnd2;bitsize:128;offset:1064;encoding:vector;format:vector-uint64;set:Memory
Protection Extensions;ehframe:103;dwarf:103;#53
history[314] tid=0x7338 < 19> send packet: $qRegisterInfo4d#da
history[315] tid=0x7338 < 130> read packet:
$name:bnd3;bitsize:128;offset:1080;encoding:vector;format:vector-uint64;set:Memory
Protection Extensions;ehframe:104;dwarf:104;#54
history[316] tid=0x7338 < 19> send packet: $qRegisterInfo4e#db
history[317] tid=0x7338 < 76> read packet:
$name:bndcfgu;bitsize:64;offset:1096;encoding:vector;format:vector-uint8;#99
history[318] tid=0x7338 < 19> send packet: $qRegisterInfo4f#dc
history[319] tid=0x7338 < 78> read packet:
$name:bndstatus;bitsize:64;offset:1104;encoding:vector;format:vector-uint8;#8e
...
"""
The bndcfgu and bndstatus registers don't have the 'Memory Protections
Extension' set. I looked at the code and it seems that that is set
correctly.
So I'm not sure what's the problem or where does it come from.
Also there is a second failure related to something like this in the
tests:
"""
registerSet.GetName().lower()
"""
For some reason the registerSet.GetName() returns None.
llvm-svn: 280703
The commit introduced an array of const objects, which libstdc++ does not like. Make the object
non-const.
Also fix a compiler warning while I'm in there.
llvm-svn: 280697
When a process stops due to a crash, we get the crashing instruction and the
crashing memory location (if there is one). From the user's perspective it is
often unclear what the reason for the crash is in a symbolic sense.
To address this, I have added new fuctionality to StackFrame to parse the
disassembly and reconstruct the sequence of dereferneces and offsets that were
applied to a known variable (or fuction retrn value) to obtain the invalid
pointer.
This makes use of enhancements in the disassembler, as well as new information
provided by the DWARF expression infrastructure, and is exposed through a
"frame diagnose" command. It is also used to provide symbolic information, when
available, in the event of a crash.
The algorithm is very rudimentary, and it needs a bunch of work, including
- better parsing for assembly, preferably with help from LLVM
- support for non-Apple platforms
- cleanup of the algorithm core, preferably to make it all work in terms of
Operands instead of register/offset pairs
- improvement of the GetExpressioPath() logic to make prettier expression
paths, and
- better handling of vtables.
I welcome all suggestios, improvements, and testcases.
llvm-svn: 280692
As Pavel pointed out in a comment on llvm.org/pr30271, the VPATH I was
using here to eliminate duplication of a .cpp file had a side effect of
attempting to pull in a .o/.obj file from that same parent dir, where
other tests can be running in parallel. This is no good.
For now, I have removed the VPATH, which should address
llvm.org/pr30271. I have also removed the XFAIL.
llvm-svn: 280675
Summary:
The Intel(R) Memory Protection Extensions (Intel(R) MPX) associates pointers
to bounds, against which the software can check memory references to
prevent out of bound memory access.
This patch allows accessing the MPX registers:
* bnd0-3: 128-bit registers to hold the bound values,
* bndcfgu, bndstatus: 64-bit configuration registers,
This patch also adds read/write tests for the MPX registers in the register
command tests and adds a new subdirectory for MPX specific tests.
Signed-off-by: Valentina Giusti <valentina.giusti@intel.com>
Reviewers: labath, granata.enrico, lldb-commits, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D24187
llvm-svn: 280668
Summary:
Replace uses of the local MIUtilParse::CRegexParser class with the LLVM support class llvm::Regex. This reduces duplication of code, and makes it possible to remove the MIUtilParse::CRegexParser class that requires LLVM internal implementation headers.
Bug: https://llvm.org/bugs/show_bug.cgi?id=29138
Reviewers: dawn, abidh, ki.stfu
Subscribers: labath, ki.stfu, lldb-commits
Differential Revision: https://reviews.llvm.org/D23882
Author: Michał Górny <mgorny@gentoo.org>
llvm-svn: 280662
This code represents the Week of Code work I did on bringing up
lldb-server LLGS support for Darwin. It does not include the
Xcode project changes needed, as we don't want to throw that switch
until more support is implemented (i.e. this change is inert, no
build systems use it yet. I've verified on Ubuntu 16.04, macOS
Xcode and macOS cmake builds).
This change does some minimal refactoring of code that is shared
with the Linux LLGS portion, moving it from NativeProcessLinux into
NativeProcessProtocol. That code is also used by NativeProcessDarwin.
Current state on Darwin:
* Process launching is implemented. (Attach is not).
Launching on devices has not yet been tested (FBS/BKS might
need a bit of work).
* Inferior waitpid monitoring and communication of exit status
via MainLoop callback is implemented.
* Memory read/write, breakpoints, thread register context, etc.
are not yet implemented. This impacts process stop/resume, as
the initial launch suspended immediately starts the process
up and running because it doesn't know it is supposed to remain
stopped.
* I implemented the equivalent of MachThreadList as
NativeThreadListDarwin, in anticipation that we might want to
factor out common parts into NativeThreadList{Protocol} and share
some code here. After writing it, though, the fallout from merging
Mach Task/Process into a single concept plus some other minor
changes makes the whole NativeThreadListDarwin concept nothing more
than dead weight. I am likely going to get rid of this class and
just manage it directly in NativeProcessDarwin, much like I did
for NativeProcessLinux.
* There is a stub-out call for starting a STDIO thread. That will
go away and adopt the MainLoop pselect-based IOObject reading.
I am developing the fully-integrated changes in the following repo,
which contains the necessary Xcode bits and the glue that enables
lldb-debugserver on a macOS system:
https://github.com/tfiala/lldb/tree/llgs-darwin
This change also breaks out a few of the lldb-server tests into
their own directory, and adds some $qHostInfo tests (not sure why
I didn't write those tests back when I initially implemented that
on the Linux side).
llvm-svn: 280604
this is a resubmission of r280476. The problem with the original commit was that it was printing
out all numbers as signed, which was wrong for unsigned numbers with the MSB set. Fix that and
add a unit test covering that case.
llvm-svn: 280480
This reverts commit r280476 as it breaks several tests on i386. I was fixing an 32-bit
breakage, and I did not run the 32-bit test suite before submitting, oops.
llvm-svn: 280478
Summary:
It seems the original intention of the function was printing signed values in decimal format, and
unsigned values in hex (without the leading "0x"). However, signed and unsigned long were
exchanged, which lead to amusing test failures in TestMemoryFind.py.
Instead of just switching the two, I think we should just print everything in decimal here, as
the current behaviour is very confusing (especially when one does not request printing of types).
Nothing seems to depend on this behaviour except and we already have a way for the user to
request the format he wants when printing values for most commands (which presumably does not go
through this function).
I also add a unit tests for the function in question.
Reviewers: clayborg, granata.enrico
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D24126
llvm-svn: 280476
Summary:
This is a Minidump parsing code.
There are still some more structures/data streams that need to be added.
The aim ot this is to be used in the implementation of
a minidump debugging plugin that works on all platforms/architectures.
Currently we have a windows-only plugin that uses the WinAPI to parse
the dump files.
Also added unittests for the current functionality.
Reviewers: labath, amccarth
Subscribers: tberghammer, danalbert, srhines, lldb-commits, dschuff
Differential Revision: https://reviews.llvm.org/D23545
llvm-svn: 280356
the test fails for a very prosaic reason: `(const char *)0x1000` returns "4096" on x86_64 and
"1000" (without the "0x") on i386. I haven't tried other 32-bit arches, but I am guessing the
behaviour is the same. XFAIL until someone can get a chance to look at this.
llvm-svn: 280344
Summary:
The vdso is full of hand-written assembly which the instruction emulator has a hard time
understanding. Luckily, the kernel already provides us with correct unwind info for them. So
let's use it.
This fixes (at least) the AssertingInferiorTestCase.test_inferior_asserting_disassemble test on
android N i386.
Reviewers: tberghammer
Subscribers: tberghammer, danalbert, lldb-commits
Differential Revision: https://reviews.llvm.org/D24079
llvm-svn: 280264
Summary:
- copies the new file in the cmake build
- adds an additional import statement
- marks the test as no-debug-info specific, as it seems to be testing a python feature
Reviewers: granata.enrico
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D24074
llvm-svn: 280261
The rewrite of StringExtractor::GetHexMaxU32 changes functionality in a way which makes
lldb-server crash. The crash (assert) happens when parsing the "qRegisterInfo0" packet, because
the function tries to drop_front more bytes than the packet contains. It's not clear to me
whether we should consider this a bug in the caller or the callee, but it any case, it worked
before, so I am reverting this until we can figure out what the proper interface should be.
llvm-svn: 280207
Summary:
e80f43fd78
greatly improved an API, but missed one more occurence of legacy usage.
This leads to:
if (extractor.GetHexBytes(&payload_bytes[0], payload_bytes.size(), '\xdd') != payload_bytes.size())
~~~~~~~~~~~~~~~~~~~~~ ^~~~~~
/lldb/include/lldb/Utility/StringExtractor.h:151:5: note: 'GetHexBytes' declared here
Reviewers: zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D24064
Author: Taras Tsugrii <ttsugrii@fb.com>
llvm-svn: 280202
This class enables one to easily write a synthetic child provider by writing a class that returns pairs of names and primitive Python values - the base class then converts those into LLDB SBValues
Comes with a test case
llvm-svn: 280172
Makes Peek() return a StringRef instead of a const char*.
This leads to a few callers of Peek() being able to be made a
little nicer (for example using StringRef member functions instead
of c-style strncmp and related functions) and generally safer
usage.
llvm-svn: 280139
LLDB was rolling its own endian conversion code, but functions to
do this already exist in LLVM. While the code was probably
correct, no point reinventing the wheel when we have well tested
equivalents in LLVM that are one-liners.
llvm-svn: 280137
This is a NFC that adds more unit test coverage of the GetHex***
functions as well as the functions to extract numbers with a
specific endianness.
llvm-svn: 280124
MutableArrayRef<T> is essentially a safer version of passing around
(T*, length) pairs and provides some convenient functions for working
with the data without having to manually manipulate indices.
This is a minor NFC.
llvm-svn: 280123
autoconf+make have been removed from LLVM and LLDB ~6month ago. We
shouldn't advertise it on the website as a valid way to build LLDB.
Differential revision: https://reviews.llvm.org/D24025
llvm-svn: 280102
StringExtractor::GetNameColonValue() looks for a substring of the
form "<name>:<value>" and returns <name> and <value> to the caller.
This results in two unnecessary string copies, since the name and
value are not translated in any way and simply returned as-is.
By converting this to return StringRefs we can get rid of hundreds
of string copies.
llvm-svn: 280000
I have some improvements to make to StringExtractor that require
using LLVM. debugserver can't take a dependency on LLVM but uses
this file, so I'm forking it off into StdStringExtractor and
StringExtractor, so that StringExtractor can take advantage of
some performance improvements and readability improvements that
LLVM can provide.
llvm-svn: 279997
std::atomic<uint64_t> requires 64-bit alignment in order to
guarantee atomicity. Normally the compiler is pretty good about
aligning types, but an exception to this is when the type is
passed by value as a function parameter. In this case, if your
stack is 4-byte aligned, most modern compilers (including clang
as of LLVM 4.0) fail to align the type, rendering the atomicity
ineffective.
A deeper investigation of the class's implementation suggests
that the use of atomic was in vain anyway, because if the class
were to be shared amongst multiple threads, there were already
other data races present, and that the proper way to ensure
thread-safe access to this data would be to use a mutex from a
higher level.
Since the std::atomic was not serving its intended purpose anyway,
and since the presence of it generates compiler errors on some
platforms that cannot be workaround, we remove std::atomic from
Address here. Although unlikely, if data races do resurface
the proper fix should involve a mutex from a higher level, or an
attempt to limit the Address's access to a single thread.
llvm-svn: 279994
These are helpful on their own, but will be even more useful
once the GetNameColonValue is updated to return StringRefs
instead of std::strings.
llvm-svn: 279919
This started as an effort to change StringExtractor to store a
StringRef internally instead of a std::string. I got that working
locally with just 1 test failure which I was unable to figure out the
cause of. But it was also a massive changelist due to a trickle
down effect of changes.
So I'm starting over, using what I learned from the first time to
tackle smaller, more isolated changes hopefully leading up to
a full conversion by the end.
At first the changes (such as in this CL) will seem mostly
a matter of preference and pointless otherwise. However, there
are some places in my larger CL where using StringRef turned 20+
lines of code into 2, drastically simplifying logic. Hopefully
once these go in they will illustrate some of the benefits of
thinking in terms of StringRef.
llvm-svn: 279917
easier to scan a set of options with a relatively large number of positional
arguments. This commit standardizes their formatting throughout LLDB and
applies surrounding directives to exempt them from being formatted by
clang-format.
These kinds of exemptions should be rare cases that benefit significantly
from alternative formatting. They also imply a long-term obligation to
maintain their format since the automated tools will not do so.
llvm-svn: 279882
Reports an error instead. We can fix this later to make persistent variables
work, but right now we hit an LLVM assertion if we get this wrong.
<rdar://problem/27770298>
llvm-svn: 279850
Summary:
Oleksiy is no longer active in LLDB, I'd like to formally assume ownership of the linux and
android parts.
Reviewers: ovyalov, clayborg
Subscribers: tberghammer, danalbert, lldb-commits
Differential Revision: https://reviews.llvm.org/D23877
llvm-svn: 279812
Summary:
Previously the builting demangler was on for platforms that explicitly set a flag by modifying
Mangled.cpp (windows, freebsd). The Xcode build always used builtin demangler by passing a
compiler flag. This adds a cmake flag (defaulting to ON) to configure the demangling library used
at build time. The flag is only available on non-windows platforms as there the system demangler
is not present (in the form we're trying to use it, at least).
The impact of this change is:
- linux: switches to the builtin demangler
- freebsd, windows: NFC (I hope)
- netbsd: switches to the builtin demangler
- osx cmake build: switches to the builtin demangler (matching the XCode build)
The main motivation for this is the cross-platform case, where it should bring more consistency
by removing the dependency on the host demangler (which can be completely unrelated to the debug
target).
Reviewers: zturner, emaste, krytarowski
Subscribers: emaste, clayborg, lldb-commits
Differential Revision: https://reviews.llvm.org/D23830
llvm-svn: 279808
Clang on ARM64 was making the three Function methods with identical bodies have
one implementation that was shared. That threw off the count of breakpoints, since
we don't count as separate locations three functions with the same address.
I also cleaned up the test case while I was at it.
<rdar://problem/27001915>
llvm-svn: 279800
Enrico Granata