Previously, lld/mac only ad-hoc codesigned executables on arm64.
Matches ld64 behavior. Part of PR49443. Fixes 14 of 17 failures when running
check-llvm with lld as host linker on an M1 MBP.
Differential Revision: https://reviews.llvm.org/D97994
-flat_namespace makes lld emit binaries that use name lookup that's more in
line with other POSIX systems: Instead of looking up symbols as (dylib,name)
pairs by dyld, they're instead looked up just by name.
-flat_namespace has three effects:
1. MH_TWOLEVEL and MH_NNOUNDEFS are no longer set in the Mach-O header
2. All symbols use BIND_SPECIAL_DYLIB_FLAT_LOOKUP as ordinal
3. When a dylib is added to the link, its dependent dylibs are also added,
so that lld can verify that no undefined symbols remain at the end of
a link with -flat_namespace. These transitive dylibs are added for symbol
resolution, but they are not emitted in LC_LOAD_COMMANDs.
-undefined with -flat_namespace still isn't implemented. Before this change,
it was impossible to hit that combination because -flat_namespace caused a
diagnostic. Now that it no longer does, emit a dedicated temporary diagnostic
when both flags are used.
Differential Revision: https://reviews.llvm.org/D97641
Dynamic lookup symbols are symbols that work like dynamic symbols
in ELF: They're not bound to a dylib like normal Mach-O twolevel lookup
symbols, but they live in a global pool and dyld resolves them against
exported symbols from all loaded dylibs.
This adds support for dynamical lookup symbols to lld/mac. They are
represented as DylibSymbols with file set to nullptr.
This also uses this support to implement the -U flag, which makes
a specific symbol that's undefined at the end of the link a
dynamic lookup symbol.
For -U, it'd be sufficient to just to a pass over remaining undefined symbols
at the end of the link and to replace them with dynamic lookup symbols then.
But I'd like to use this code to implement flat_namespace too, and that will
require real support for resolving dynamic lookup symbols in SymbolTable. So
this patch adds this now already.
While writing tests for this, I noticed that we didn't set N_WEAK_DEF in the
symbol table for DylibSymbols, so this fixes that too.
Differential Revision: https://reviews.llvm.org/D97521
See discussion on https://reviews.llvm.org/D93263
-flat_namespace isn't implemented yet, and neither is -undefined dynamic,
so this makes -undefined pretty pointless in lld/MachO for now. But once
we implement -flat_namespace (which we need to do anyways to get check-llvm
to pass with lld as host linker), the code's already there.
Follow-up to https://reviews.llvm.org/D93263#2491865
Differential Revision: https://reviews.llvm.org/D96963
Differential Revision: https://reviews.llvm.org/D95913
Usage: -bundle_loader <executable>
This option specifies the executable that will load the build output file being linked.
When building a bundle, users can use the --bundle_loader to specify an executable
that contains symbols referenced, but not implemented in the bundle.
Since we emit diagnostics for undefineds in Writer::scanRelocations()
and symbols referenced by -u flags aren't referenced by any relocations,
this needs some manual code (similar to the entry point).
Differential Revision: https://reviews.llvm.org/D94371
I noticed that this option was not appearing at all in the `--help`
messages for `wasm-ld` or `ld.lld`.
Add help text and make it consistent across all ports.
Differential Revision: https://reviews.llvm.org/D94925
Just getting rid of some logspew as I test LLD under existing build
systems.
Reviewed By: #lld-macho, smeenai
Differential Revision: https://reviews.llvm.org/D95213
Run the ObjCARCContractPass during LTO. The legacy LTO backend (under
LTO/ThinLTOCodeGenerator.cpp) already does this; this diff just adds that
behavior to the new LTO backend. Without that pass, the objc.clang.arc.use
intrinsic will get passed to the instruction selector, which doesn't know how to
handle it.
In order to test both the new and old pass managers, I've also added support for
the `--[no-]lto-legacy-pass-manager` flags.
P.S. Not sure if the ordering of the pass within the pipeline matters...
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D94547
It's an extension to ld64, but all the other ports have it, and
someone asked for it in PR43721.
While here, change the COFF help text to match the other ports.
Differential Revision: https://reviews.llvm.org/D93491
Private extern symbols are used for things scoped to the linkage unit.
They cause duplicate symbol errors (so they're in the symbol table,
unlike TU-scoped truly local symbols), but they don't make it into the
export trie. They are created e.g. by compiling with
-fvisibility=hidden.
If two weak symbols have differing privateness, the combined symbol is
non-private external. (Example: inline functions and some TUs that
include the header defining it were built with
-fvisibility-inlines-hidden and some weren't).
A weak private external symbol implicitly has its "weak" dropped and
behaves like a regular strong private external symbol: Weak is an export
trie concept, and private symbols are not in the export trie.
If a weak and a strong symbol have different privateness, the strong
symbol wins.
If two common symbols have differing privateness, the larger symbol
wins. If they have the same size, the privateness of the symbol seen
later during the link wins (!) -- this is a bit lame, but it matches
ld64 and this behavior takes 2 lines less to implement than the less
surprising "result is non-private external), so match ld64.
(Example: `int a` in two .c files, both built with -fcommon,
one built with -fvisibility=hidden and one without.)
This also makes `__dyld_private` a true TU-local symbol, matching ld64.
To make this work, make the `const char*` StringRefZ ctor to correctly
set `size` (without this, writing the string table crashed when calling
getName() on the __dyld_private symbol).
Mention in CommonSymbol's comment that common symbols are now disabled
by default in clang.
Mention in -keep_private_externs's HelpText that the flag only has an
effect with `-r` (which we don't implement yet -- so this patch here
doesn't regress any behavior around -r + -keep_private_externs)). ld64
doesn't explicitly document it, but the commit text of
http://reviews.llvm.org/rL216146 does, and ld64's
OutputFile::buildSymbolTable() checks `_options.outputKind() ==
Options::kObjectFile` before calling `_options.keepPrivateExterns()`
(the only reference to that function).
Fixes PR48536.
Differential Revision: https://reviews.llvm.org/D93609
TREATMENT can be `error`, `warning`, `suppress`, or `dynamic_lookup`
The `dymanic_lookup` remains unimplemented for now.
Differential Revision: https://reviews.llvm.org/D93263
From what I can tell, it's essentially identical to
`-sub_library`, but it doesn't match files ending in ".dylib".
Reviewed By: #lld-macho, thakis
Differential Revision: https://reviews.llvm.org/D93276
Dylibs that are "public" -- i.e. top-level system libraries -- are considered
implicitly linked when another library re-exports them. That is, we should load
them & bind directly to their symbols instead of via their re-exporting
umbrella library. This diff implements that behavior by default, as well as an
opt-out flag.
In theory, this is just a performance optimization, but in practice it seems
that it's needed for correctness.
Fixes llvm.org/PR48395.
Reviewed By: thakis
Differential Revision: https://reviews.llvm.org/D93000
`-mcpu` and `-code-model` tests were copied from similar ones in
LLD-ELF.
There doesn't seem to be an equivalent test for `-mattr` in LLD-ELF, so
I've verified our behavior by cribbing a test from
CodeGen/X86/recip-fastmath.ll.
Reviewed By: #lld-macho, compnerd, MaskRay
Differential Revision: https://reviews.llvm.org/D92912
This makes it possible for STABS entries to reference the debug info
contained in the LTO-compiled output.
I'm not sure how to test the file mtime within llvm-lit -- GNU and BSD
`stat` take different command-line arguments. I've omitted the check for
now.
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D92537
The problem was that `sym` became replaced in the call
to make<ObjFile> and referring to it afer that read memory that now
stored a different kind of symbol (a Defined instead of a LazySymbol).
Since this happens only once per archive, just copy the symbol to the
stack before make<ObjFile> and read the copy instead.
Originally reviewed at https://reviews.llvm.org/D92496
This is useful for debugging why lld loads .o files it shouldn't load.
It's also useful for users of lld -- I've used ld64's version of this a
few times.
Differential Revision: https://reviews.llvm.org/D92496
* Enable PIE by default if targeting 10.6 or above on x86-64. (The
manpage says 10.7, but that actually applies only to i386, and in
general varies based on the target platform. I didn't update the
manpage because listing all the different behaviors would make for a
pretty long description.)
* Add support for `-no_pie`
* Remove `HelpHidden` from `-pie`
Reviewed By: thakis
Differential Revision: https://reviews.llvm.org/D92362
They've been implemented since D87856 but since they still were
HelpHidden, the driver still warned claiming they were implemented.
Remove HelpHidden.
Use -fatal_warnings to test that the flags now don't warn. The
test depends on D91894 and D91891 to pass.
Differential Revision: https://reviews.llvm.org/D91971
This adds support for ld.lld's --reproduce / lld-link's /reproduce:
flag to the MachO port. This flag can be added to a link command
to make the link write a tar file containing all inputs to the link
and a response file containing the link command. This can be used
to reproduce the link on another machine, which is useful for sharing
bug report inputs or performance test loads.
Since the linker is usually called through the clang driver and
adding linker flags can be a bit cumbersome, setting the env var
`LLD_REPRODUCE=foo.tar` triggers the feature as well.
The file response.txt in the archive can be used with
`ld64.lld.darwinnew $(cat response.txt)` as long as the contents are
smaller than the command-line limit, or with `ld64.lld.darwinnew
@response.txt` once D92149 is in.
The support in this patch is sufficient to create a tar file for
Chromium's base_unittests that can link after unpacking on a different
machine.
Differential Revision: https://reviews.llvm.org/D92274
This patch:
- adds an ld64.lld.darwinnew symlink for lld, to go with f2710d4b57,
so that `clang -fuse-ld=lld.darwinnew` can be used to test new
Mach-O lld while it's in bring-up. (The expectation is that we'll
remove this again once new Mach-O lld is the defauld and only Mach-O
lld.)
- lets the clang driver know if the linker is lld (currently
only triggered if `-fuse-ld=lld` or `-fuse-ld=lld.darwinnew` is
passed). Currently only used for the next point, but could be used
to implement other features that need close coordination between
compiler and linker, e.g. having a diag for calling `clang++` instead
of `clang` when link errors are caused by a missing C++ stdlib.
- lets the clang driver pass `-demangle` to Mach-O lld (both old and
new), in addition to ld64
- implements -demangle for new Mach-O lld
- changes demangleItanium() to accept _Z, __Z, ___Z, ____Z prefixes
(and updates one test added in D68014). Mach-O has an extra
underscore for symbols, and the three (or, on Mach-O, four)
underscores are used for block names.
Differential Revision: https://reviews.llvm.org/D91884
This adds `--[no-]color-diagnostics[=auto,never,always]` to
the MachO port and harmonizes the flag in the other ports:
- Consistently use MetaVarName
- Consistently document the non-eq version as alias of the eq version
- Use B<> in the ports that have it (no-op, shorter)
- Fix oversight in COFF port that made the --no flag have the wrong
prefix
Differential Revision: https://reviews.llvm.org/D91640
Just enough to consume some bitcode files and link them. There's more
to be done around the symbol resolution API and the LTO config, but I don't yet
understand what all the various LTO settings do...
Reviewed By: #lld-macho, compnerd, smeenai, MaskRay
Differential Revision: https://reviews.llvm.org/D90663
They cause their corresponding libraries / frameworks to be loaded via
`LC_LOAD_WEAK_DYLIB` instead of `LC_LOAD_DYLIB`.
Reviewed By: #lld-macho, gkm
Differential Revision: https://reviews.llvm.org/D87929
Remove all spurious `HelpHidden` flags from `lld/MachO/Options.td`. Add test for `HelpHidden` to `warnIfUnimplementedOption()` so that the empty `// handled elsewhere` case is unnecessary.
Reviewed By: #lld-macho, int3, smeenai
Differential Revision: https://reviews.llvm.org/D88160
Stifle the warning for unimplemented option `-dyamic`, since it is already the default. Add `Config::staticLink` and skeletal support for altering the flag, but otherwise leave the option `-static` as hidden and its warning in place.
Differential Revision: https://reviews.llvm.org/D88045
Pretty straightforward; just emits LC_RPATH for dyld to consume.
Note that lld itself does not yet support dylib lookup via @rpath.
Reviewed By: #lld-macho, compnerd
Differential Revision: https://reviews.llvm.org/D85701
Handle command-line option `-sectcreate SEG SECT FILE`, which inputs a binary blob from `FILE` into `SEG,SECT`
Reviewed By: int3
Differential Revision: https://reviews.llvm.org/D85501
Tools like `install_name_tool` and `codesign` may modify the Mach-O
header and increase its size. The linker has to provide padding to make this
possible. This diff does that, plus sets its default value to 32 bytes (which
is what ld64 does).
Unlike ld64, however, we lay out our sections *exactly* `-headerpad` bytes from
the header, whereas ld64 just treats the padding requirement as a lower bound.
ld64 actually starts laying out the non-header sections in the __TEXT segment
from the end of the (page-aligned) segment rather than the front, so its
binaries typically have more than `-headerpad` bytes of actual padding.
We should consider implementing the same alignment behavior.
Reviewed By: #lld-macho, compnerd
Differential Revision: https://reviews.llvm.org/D84714
XCode passes in this flag, which we do not yet implement. Skip
over the argument for now so we can at least successfully parse the
linker invocation.
Reviewed By: #lld-macho, compnerd
Differential Revision: https://reviews.llvm.org/D84485
This is a complete Options.td compiled from ld(1) dated 2018-03-07 and
cross checked with ld64 source code version 512.4 dated 2018-03-18.
This is the first in a series of diffs for argument handling. Follow-ups
will include switch cases for all the new instances of `OPT_foo`, and
parsing/validation of arguments attached to options, e.g., more code
akin to `OPT_platform_version` and associated `parsePlatformVersion()`.
Reviewed By: smeenai
Differential Revision: https://reviews.llvm.org/D80582
Nico Weber